Techdata: HPE 560 J9846a

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
WiFi AP
Brand:
HPE
Model:
560
Version:
J9845A, J9846A, J9847A, J9848A
FCCID:
https://fcc.io/RTP-MRLBB1303
Availability:
Discontinued 2016
Where available:
ebay.com
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=af329ec38980e2f706411a11b9f344a62eb0dd8f
Supported Since Rel:
24.10.0
Supported Current Rel:
24.10.5
Gluon support:
unknown
Target:
mpc85xx
Subtarget:
p1020
Package architecture:
powerpc_8548
Bootloader:
U-Boot
CPU:
Freescale P1020
CPU Cores:
2
CPU MHz:
800
Flash MB:
128NAND
RAM MB:
256
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
1
Ethernet 2.5Gbit ports:
-
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
-
SFP+ ports:
-
Switch:
¿
VLAN:
Yes
Modem:
-
WLAN Hardware:
Qualcomm Atheros QCA9890 (mini-PCIe), Atheros AR9390 (mini-PCIe)
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
WLAN 6.0GHz:
-
WLAN 60.0GHz:
-
WLAN Comments:
3x3:3. Factory behavior is 2.4ghz radio should go to 2x2:2 to maintain 802.3af compliance. This is untested.
WLAN driver:
ath9k, ath10k-ct, rtl8xxxu
Detachable Antennas:
-
Bluetooth:
-
miniPCI ports:
2x miniPCIe
USB ports:
-
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
9600 / 8N1
Serial connection voltage:
¿
JTAG:
¿
LED count:
¿
Button count:
¿
GPIOs:
¿
Power Supply:
802.3at PoE PD
Outdoor:
No
OpenVPN performance:
¿
Wireguard performance:
¿
OWrt Forum Topic URL:
https://forum.openwrt.org/t/hp-560-access-point-ww-support-j9846a/216953
WikiDevi URL:
https://wikidevi.wi-cat.ru/HP_560_Access_Point_(J9845A)
WikiDevi ID:
HP_560_Access_Point_(J9845A)
OEM Device Homepage URL:
http://¿
Firmware OEM Stock URL:
http://¿
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/24.10.5/targets/mpc85xx/p1020/openwrt-24.10.5-mpc85xx-p1020-hpe_msm460-squashfs-factory.bin
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/24.10.5/targets/mpc85xx/p1020/openwrt-24.10.5-mpc85xx-p1020-hpe_msm460-squashfs-sysupgrade.bin
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/mpc85xx/p1020/openwrt-mpc85xx-p1020-hpe_msm460-squashfs-factory.bin
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/mpc85xx/p1020/openwrt-mpc85xx-p1020-hpe_msm460-squashfs-sysupgrade.bin
Installation method(s):
see forum
Comment installation:
Use custom firmware adding ath10k. kmod-ath10k-ct ath10k-board-qca9888 ath10k-firmware-qca988x-ct
Recovery method(s):
unknown
Picture:
picture: genericrouter1.png
Comments:
Untested on J9845A, J9847A, J9848A. Factory behavior is 2.4ghz radio should go to 2x2:2 to maintain 802.3af compliance. This is untested.
General nomenclature

Details

Conventions per characteristic

Details

  • Last modified: 2026/02/01 05:23
  • by raylynnknight