Techdata: GL.iNet GL-MT3000

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Travel Router
Brand:
GL.iNet
Model:
GL-MT3000 (Beryl AX)
FCCID:
http://fcc.io/2AFIW-MT3000
Availability:
Available 2026
Where available:
gl-inet.com, amazon.com
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=7cbe34170e3d8471c1ebacde33a2372c92433be4
Supported Since Rel:
23.05.2
Supported Current Rel:
25.12.5
Gluon support:
Yes
Target:
mediatek
Subtarget:
filogic
Package architecture:
aarch64_cortex-a53
Bootloader:
U-Boot
CPU:
MediaTek MT7981BA
CPU Cores:
2
CPU MHz:
1300
Flash MB:
256NAND
RAM MB:
512
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
1
Ethernet 2.5Gbit ports:
1
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
-
SFP+ ports:
-
Switch:
MediaTek MT7981BA
VLAN:
Yes
Modem:
-
Comments network ports:
MaxLinear GPY211C 2.5Gbe Phy
WLAN Hardware:
MediaTek MT7981BA, MediaTek MT7976CN
WLAN 2.4GHz:
b/g/n/ax
WLAN 5.0GHz:
a/n/ac/ax
WLAN 6.0GHz:
-
WLAN 60.0GHz:
-
WLAN Comments:
2.4GHz: 2x2:2 MIMO, 5GHz: 2X3:2 MIMO
WLAN driver:
mt76
Detachable Antennas:
-
Bluetooth:
-
miniPCI ports:
-
USB ports:
1x 3.0
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
3.3
JTAG:
No
LED count:
2
Button count:
1
GPIOs:
¿
Power Supply:
5 VDC, 3A via USB Type-C
Outdoor:
No
OpenVPN performance:
150
Wireguard performance:
350
Device Page:
gl-mt3000
WikiDevi URL:
https://wikidevi.wi-cat.ru/GL.iNet_GL-MT3000_(Beryl_AX)
WikiDevi ID:
GL.iNet_GL-MT3000_(Beryl_AX)
OEM Device Homepage URL:
https://www.gl-inet.com/products/gl-mt3000/
Firmware OEM Stock URL:
https://dl.gl-inet.com/?model=mt3000
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/25.12.5/targets/mediatek/filogic/openwrt-25.12.5-mediatek-filogic-glinet_gl-mt3000-initramfs-kernel.bin
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/25.12.5/targets/mediatek/filogic/openwrt-25.12.5-mediatek-filogic-glinet_gl-mt3000-squashfs-sysupgrade.bin
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/openwrt-mediatek-filogic-glinet_gl-mt3000-initramfs-kernel.bin
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/openwrt-mediatek-filogic-glinet_gl-mt3000-squashfs-sysupgrade.bin
Installation method(s):
GUI OEM, GL.Inet installation
Comment installation:
Flash OpenWrt 'sysupgrade' image from GL.iNet web UI, select do not keep settings Do not use 'factory' image to preserve GL U-boot.
Recovery method(s):
U-Boot TFTP + serial recovery, U-Boot web recovery
Picture:
picture: gl-mt3000_back.jpg
Comments:
HFO, WED, and DSA all supported.
General nomenclature

Details

Conventions per characteristic

Details

  • Last modified: 2026/07/20 18:56
  • by phinn