Techdata: FriendlyARM NanoPi R4S

The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile.

Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Single Board Computer
Brand:
FriendlyARM
Model:
NanoPi R4S
Availability:
Available 2022
Where available:
friendlyelec.com, amazon.com, aliexpress.com
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=b72157984268b6542dd667859e4aed9cc2bbb7f5
Supported Since Rel:
22.03.0
Supported Current Rel:
22.03.3
Image too big:
-
Gluon support:
Yes
Target:
rockchip
Subtarget:
armv8
Package architecture:
aarch64_generic
Bootloader:
U-Boot
CPU:
Rockchip RK3399
CPU Cores:
6
CPU MHz:
2000
Flash MB:
microSD, microSDHC, microSDXC
RAM MB:
4096
Ethernet 100M ports:
-
Ethernet Gbit ports:
2
VLAN:
Yes
Modem:
-
Comments network ports:
1G x1 (RTL8111H), 1G x1 (RTL8211E on PCIe bus)
WLAN Hardware:
None
WLAN 2.4GHz:
-
WLAN 5.0GHz:
-
Detachable Antennas:
-
Bluetooth:
-
miniPCI ports:
-
USB ports:
1x 2.0 header, 2x 3.0, 1x USB-C (power)
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
1500000 8N1
Serial connection voltage:
3.3V
JTAG:
No
LED count:
4
Button count:
1
GPIOs:
10
Power Supply:
5 VDC, 3.0 A
Outdoor:
No
Device Page:
nanopi_r4s_v1
OWrt Forum Topic URL:
https://forum.openwrt.org/t/nanopi-r4s-rk3399-4g-is-a-great-new-openwrt-device/79143
OEM Device Homepage URL:
https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R4S
Firmware OEM Stock URL:
https://www.friendlyelec.com/index.php?route=information/information&information_id=7
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/22.03.3/targets/rockchip/armv8/openwrt-22.03.3-rockchip-armv8-friendlyarm_nanopi-r4s-ext4-sysupgrade.img.gz
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/22.03.3/targets/rockchip/armv8/openwrt-22.03.3-rockchip-armv8-friendlyarm_nanopi-r4s-ext4-sysupgrade.img.gz
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/rockchip/armv8/openwrt-rockchip-armv8-friendlyarm_nanopi-r4s-ext4-sysupgrade.img.gz
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/rockchip/armv8/openwrt-rockchip-armv8-friendlyarm_nanopi-r4s-ext4-sysupgrade.img.gz
Installation method(s):
SD card
Comment installation:
flash image to SD card
Recovery method(s):
SD card
Picture:
picture: r4s_01-900x630.jpg
Comments:
1GB DDR3 and 4GB LPDDR4 versions are available
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2023/01/09 03:32
  • by tmomas