Techdata: FriendlyARM NanoPi R1

The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile.

Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Single Board Computer
Brand:
FriendlyARM
Model:
NanoPi R1
FCCID:
http://¿
Availability:
Available 2020
Where available:
OEM website, amazon.de
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e6d9f6fdffc6730cfa2019788afa411828eac816
Supported Since Rel:
21.02.0
Supported Current Rel:
23.05.4
Gluon support:
unknown
Target:
sunxi
Subtarget:
cortexa7
Package architecture:
arm_cortex-a7_neon-vfpv4
Bootloader:
U-Boot
CPU:
Allwinner H3
CPU Cores:
4
CPU MHz:
1200
Flash MB:
eMMC, SD
RAM MB:
1024
Ethernet 100M ports:
1
Ethernet 1Gbit ports:
1
Ethernet 2.5Gbit ports:
-
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
-
SFP+ ports:
-
Switch:
Realtek RTL8211E Phy, Realtek RTL8152B USB to Fast Ethernet
VLAN:
¿
Modem:
-
WLAN Hardware:
AMPAK AP6212 (Broadcom BCM43430)
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
-
WLAN Comments:
MIMO 1x1:1
WLAN driver:
brcmfmac
Detachable Antennas:
1
Bluetooth:
4.0
miniPCI ports:
-
USB ports:
2x 2.0, 1x OTG
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
3.3
JTAG:
No
LED count:
3
Button count:
1
GPIOs:
-
Power Supply:
5 VDC, 2.0 A via USB Female Micro-B
Outdoor:
No
OpenVPN performance:
¿
Wireguard performance:
¿
WikiDevi URL:
https://wikidevi.wi-cat.ru/NanoPi_R1
WikiDevi ID:
NanoPi_R1
OEM Device Homepage URL:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_R1
Firmware OEM Stock URL:
http://download.friendlyarm.com/nanopir1
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/23.05.4/targets/sunxi/cortexa7/openwrt-23.05.4-sunxi-cortexa7-friendlyarm_nanopi-r1-squashfs-sdcard.img.gz
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/23.05.4/targets/sunxi/cortexa7/openwrt-23.05.4-sunxi-cortexa7-friendlyarm_nanopi-r1-squashfs-sdcard.img.gz
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/sunxi/cortexa7/openwrt-sunxi-cortexa7-friendlyarm_nanopi-r1-squashfs-sdcard.img.gz
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/sunxi/cortexa7/openwrt-sunxi-cortexa7-friendlyarm_nanopi-r1-squashfs-sdcard.img.gz
Installation method(s):
SD card, Sunxi installation, see git-commit
Recovery method(s):
SD card
Picture:
picture: genericrouter1.png
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/07/20 03:22
  • by raylynnknight