Techdata: EnGenius EAP2200

The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile.

Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
WiFi AP
Brand:
EnGenius
Model:
EAP2200
FCCID:
http://¿
Availability:
Discontinued
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=a736d912e2bad6c470c73fbf47c45ec3017371af
Supported Since Rel:
21.02.0
Supported Current Rel:
22.03.5
Gluon support:
unknown
Target:
ipq40xx
Subtarget:
generic
Package architecture:
arm_cortex-a7_neon-vfpv4
Bootloader:
U-Boot
CPU:
Qualcomm IPQ4019
CPU Cores:
4
CPU MHz:
717
Flash MB:
128NAND
RAM MB:
256
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
2
Ethernet 2.5Gbit ports:
¿
Ethernet 5Gbit ports:
¿
Ethernet 10Gbit ports:
¿
SFP ports:
¿
SFP+ ports:
¿
Switch:
Qualcomm Atheros QCA8072
VLAN:
Yes
Modem:
-
WLAN Hardware:
Qualcomm Atheros QCA4019, Qualcomm Atheros QCA9888
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
Detachable Antennas:
-
Bluetooth:
-
miniPCI ports:
¿
USB ports:
-
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
¿
JTAG:
¿
LED count:
6
Button count:
1
GPIOs:
-
Power Supply:
12 VDC, 1.0 A, PoE 802.3af
OpenVPN performance:
¿
Wireguard performance:
¿
WikiDevi URL:
http://¿
OEM Device Homepage URL:
https://www.engeniusnetworks.eu/products/wireless/indoor-access-points/eap2200
Firmware OEM Stock URL:
https://www.engeniusnetworks.eu/products/wireless/indoor-access-points/eap2200
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/22.03.5/targets/ipq40xx/generic/openwrt-22.03.5-ipq40xx-generic-engenius_eap2200-initramfs-fit-uImage.itb
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/22.03.5/targets/ipq40xx/generic/openwrt-22.03.5-ipq40xx-generic-engenius_eap2200-squashfs-nand-sysupgrade.bin
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-engenius_eap2200-initramfs-fit-uImage.itb
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-engenius_eap2200-squashfs-nand-sysupgrade.bin
Installation method(s):
U-Boot TFTP + serial recovery, see git-commit
Recovery method(s):
U-Boot TFTP + serial recovery
Picture:
picture: genericrouter1.png
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2023/05/02 10:45
  • by tmomas