Techdata: Cisco Valet M10 v1.0

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details.

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
WiFi Router
Brand:
Cisco
Model:
Valet M10
Version:
v1.0
FCCID:
https://fcc.io/Q87/-M10
Availability:
Discontinued
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=b014140c2e15d428aa2e014553e32e1b9d9196fe
Supported Since Rel:
14.07
Supported Current Rel:
EOL
Image too big:
18.06.0
Unsupported Functions:
WiFi 2.4GHz partly
Gluon support:
unknown
Target:
brcm47xx
Subtarget:
mips74k
Package architecture:
mipsel_74kc
Bootloader:
CFE
CPU:
Broadcom BCM4716
CPU Cores:
1
CPU MHz:
300
Flash MB:
4
RAM MB:
32
Ethernet 100M ports:
5
Ethernet 1Gbit ports:
-
Ethernet 2.5Gbit ports:
-
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
-
SFP+ ports:
-
Switch:
Broadcom BCM5325E
VLAN:
Yes
Modem:
-
WLAN Hardware:
Broadcom BCM4716
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
-
WLAN driver:
b43
Detachable Antennas:
-
Bluetooth:
-
miniPCI ports:
¿
USB ports:
-
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
¿
Serial connection voltage:
¿
JTAG:
Yes
LED count:
¿
Button count:
¿
GPIOs:
-
Power Supply:
12 VDC, 0.5A
Outdoor:
No
OpenVPN performance:
¿
Wireguard performance:
¿
Device Page:
m10
OWrt Forum Topic URL:
https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas
WikiDevi URL:
https://wikidevi.wi-cat.ru/Cisco_Valet_M10_v1
WikiDevi ID:
Cisco_Valet_M10_v1
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/17.01.5/targets/brcm47xx/mips74k/openwrt-17.01.5-brcm47xx-mips74k-linksys-e1000-v1-v2-v2.1-squashfs.bin
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/17.01.5/targets/brcm47xx/mips74k/openwrt-17.01.5-brcm47xx-mips74k-linksys-e1000-v1-v2-v2.1-squashfs.bin
Installation method(s):
CFE TFTP + serial recovery, see devicepage
Recovery method(s):
CFE TFTP + serial recovery
Picture:
picture: genericrouter1.png
Comments:
Reported not working with 17.01.6 and 18.06.1, hence being stuck at 17.01.5, see forum
General nomenclature

Details

Conventions per characteristic

Details

  • Last modified: 2025/05/14 18:07
  • by kjoshj