Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:huawei:b593s-22 [2023/02/23 10:44] – [Hardware Highlights] humaitatoh:huawei:b593s-22 [2023/02/23 22:49] – [Bootlogs from original Firmware] humaita
Line 385: Line 385:
  
 <WRAP bootlog><nowiki># dmesg <WRAP bootlog><nowiki># dmesg
-v?l?space?write magic succsse!%x +[    0.000000] Linux version 2.6.35.7 (q81003564@MBB-V7R1-CPE) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #1 PREEMPT Mon Sep 30 09:16:23 CST 2013 
-24680138%s start addr:0x%x size:0x%x +[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c53c7f 
-first step +[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache 
-second step +[    0.000000] Machine: Hisilicon Balong 
-thred step +[    0.000000] Ignoring unrecognised tag 0x4d534d70 
-DDR exam right !!!!!!!!!!!!!!!!!!!!!!!+[    0.000000] Memory policy: ECC disabled, Data cache writeback 
 +[000007058ms] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 36576 
 +[000007058ms] Kernel command line: root=/dev/ram0 rw console=ttyAMA0,115200 console=uw_tty0 rdinit=/init mem=144m 
 +[000007058ms] PID hash table entries: 1024 (order: 0, 4096 bytes) 
 +[000007058ms] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) 
 +[000007059ms] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +[000007074ms] Memory: 144MB = 144MB total 
 +[000007074ms] Memory: 133772k/133772k available, 13684k reserved, 0K highmem 
 +[000007075ms] Virtual kernel memory layout: 
 +[000007075ms]     vector  : 0xffff0000 - 0xffff1000     4 kB) 
 +[000007075ms]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB) 
 +[000007075ms]     DMA     : 0xff600000 - 0xffe00000     8 MB) 
 +[000007075ms]     vmalloc : 0xc9800000 - 0xf0000000   ( 616 MB) 
 +[000007075ms]     lowmem  : 0xc0000000 - 0xc9000000   ( 144 MB) 
 +[000007075ms]     modules : 0xbf000000 - 0xc0000000    16 MB) 
 +[000007075ms]       .init : 0xc0008000 - 0xc0028000   ( 128 kB) 
 +[000007075ms]       .text : 0xc0028000 - 0xc06cb000   (6796 kB) 
 +[000007075ms]       .data : 0xc06cc000 - 0xc07032e0   ( 221 kB) 
 +[000007075ms] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[000007075ms] Preemptable hierarchical RCU implementation. 
 +[000007075ms]   RCU-based detection of stalled CPUs is disabled. 
 +[000007075ms]   Verbose stalled-CPUs detection is disabled. 
 +[000007075ms] NR_IRQS:160 
 +[000007075ms] Console: colour dummy device 80x30 
 +[000007075ms] Calibrating delay loop... 897.84 BogoMIPS (lpj=4489216) 
 +[000007335ms] pid_max: default: 4096 minimum: 301 
 +[000007335ms] Mount-cache hash table entries: 512 
 +[000007336ms] CPU: Testing write buffer coherency: ok 
 +[000007336ms] start log trace. 
 +[000007340ms] NET: Registered protocol family 16 
 +[000007341ms] Serial: BalongV7R1 UART driver 
 +[000007341ms] dev:uart1: ttyAMA0 at MMIO 0x90016000 (irq = 103) is a Balong rev0 
 +[000007552ms] console [ttyAMA0] enabled 
 +[000007577ms] bio: create slab <bio-0> at 0 
 +[000007581ms] hi_gpio_probe:gpio sync in acore. 
 +[000007585ms] hi_gpio_probe:gpio sync over. 
 +[000007590ms] SCSI subsystem initialized 
 +[000007594ms] enter Acpu-softtimer-modeule-init!!
 +[000007598ms] softtimer_module_start_success-,1-- >>>>>>>>>>>>>> 
 +[000007604ms] start create the softtimer thread!!! 
 +[000007608ms] end  the  Acpu_softtimer_init()  !!! 
 +[000007613ms] usbcoreregistered new interface driver usbfs 
 +[000007618ms] usbcoreregistered new interface driver hub 
 +[000007624ms] usbcore: registered new device driver usb 
 +[000007629ms] *************************************************************** 
 +[000007636ms] begin to init mutilcore: 0000 
 +[000007640ms] hw id: main,0x400, sub,0x1 
 +[000007644ms] ===== beg mem usr function ===== 
 +[000007648ms] begin to init mutilcore: 222 
 +[000007652ms] start BSP_ICC_Init 
 +[000007655ms] g_pstIccCtrlChan = 0xf2fc02c0 
 +[000008215ms] ##### icc init success!, cnt=1971, connet=1 
 +[000008220ms] end BSP_ICC_Init 
 +[000008223ms] begin to init mutilcore: 333 
 +[000008227ms] begin to init mutilcore: 444 
 + IFC Process init success!
 +[000008235ms] A:start icc cshell... 
 +[000008239ms] cshell_icc_open success,cshell_udi_handle is 5898241 
 +[000008245ms] free_ok 
 +[000008247ms] the lcr_reg is 3 
 +[000008250ms] pTemp is 0xc8a90000 
 +[000008253ms] UDI_BUILD_DEV_ID is 0x300 
 +[000008256ms] start NVM_Init 
 +[000008259ms]  MSP_IPC udi_open Start 
 +[000008961ms]  MSP_IPC udi_open End Handle = 5a0002 
 +[000009395ms] end NVM_Init 
 +[000009397ms] begin to init mutilcore: 555 
 +[000009401ms] BCM43239_WIFI_Release: Entering... 
 +[000009406ms] DRV_HSIC_Release: Entering ... 
 +[000009410ms] start netif_init_by_nv 
 +[000009413ms] end netif_init_by_nv 
 +[000009416ms] begin to init mutilcore: 666 
 +[000009420ms] *************************************************************** 
 +[000009428ms] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. 
 +[000009443ms] NET: Registered protocol family 2 
 +[000009448ms] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) 
 +[000009455ms] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 
 +[000009462ms] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) 
 +[000009468ms] TCP: Hash tables configured (established 8192 bind 8192) 
 +[000009474ms] TCP reno registered 
 +[000009477ms] NET: Registered protocol family 1 
 +[000009482ms] Trying to unpack rootfs image as initramfs... 
 +[000009514ms] Freeing initrd memory: 204K 
 +[000009517ms] Enter ecall init 
 +[000009520ms] Finish ecall init 
 +[000009536ms] NTFS driver 2.1.29 [Flags: R/W DEBUG]. 
 +[000009541ms] fuse init (API version 7.14) 
 +[000009546ms] yaffs built Sep 30 2013 09:16:05 Installing. 
 +[000009551ms] msgmni has been set to 261 
 +[000009557ms] alg: No test for stdrng (krng) 
 +[000009561ms] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) 
 +[000009568ms] io scheduler noop registered 
 +[000009572ms] io scheduler deadline registered 
 +[000009576ms] io scheduler cfq registered (default) 
 +[000009581ms] MoniterInit entry 
 +[000009584ms] bhal: bhalInit entry 
 +[000009587ms] updateOnline_init 
 +[000009590ms] Onup_setstatus_ifc_init 
 +[000009940ms] brd: module loaded 
 +[000009946ms] loop: module loaded 
 +[000009950ms] SCSI Media Changer driver v0.25 
 +[000009954ms] Hisilicon Nand Flash Controller  Driver, Version 1.00 
 +[000009960ms] Hisilicon NANDC_V4.00 initialize... 
 +[000009965ms] NAND device: Manufacturer ID: 0xad, Chip ID: 0xbc (Hynix NANDC_V4.00) 
 +[000009972ms] NAND bus width 8 instead 16 bit 
 +[000009976ms] No NAND device found. 
 +[000009980ms] NAND device: Manufacturer ID: 0xad, Chip ID: 0xbc (Hynix NAND 512MiB 1,8V 16-bit) 
 +[000009988ms] NAND_ECC_NONE selected by board driver. This is not recommended !! 
 +[000009996ms] Partition Table list(HEX):BOOTROM_V01.02H6920CS_UDP 
 +[000010001ms] NO. |offset    |loadsize  |capacity  |loadaddr  |entry     |property   |count    |id         |name     | 
 +[000010012ms] ------------------------------------------------------------------------------------------------------- 
 +[000010022ms] 01:  00000000  ,0001117c  ,00040000  ,2ffc0000  ,2ffc0000  ,00000000  ,0000002d  ,00000101  ,BootLoad 
 +[000010032ms] 02:  00040000  ,00000000  ,00180000  ,00000000  ,00000000  ,00000800  ,00000000  ,0000010d  ,NvBackLTE 
 +[000010043ms] 03:  001c0000  ,00000000  ,00180000  ,00000000  ,00000000  ,00000800  ,00000000  ,0000010e  ,NvBackGU 
 +[000010053ms] 04:  00340000  ,000a41f7  ,01400000  ,30003f80  ,30004000  ,00000000  ,0000002c  ,00000102  ,BootRom 
 +[000010063ms] 05:  01740000  ,000a41b0  ,01380000  ,30003f80  ,30004000  ,00000000  ,0000002b  ,00000102  ,BootRom 
 +[000010073ms] 06:  02ac0000  ,016e50ec  ,02000000  ,30003f80  ,30004000  ,00000000  ,0000002c  ,00000103  ,VxWorks 
 +[000010083ms] 07:  04ac0000  ,00000000  ,00000000  ,00000000  ,00000000  ,00000000  ,00000000  ,00000110  ,Logo 
 +[000010093ms] 08:  04ac0000  ,00000000  ,00c00000  ,00000000  ,00000000  ,00000201  ,00000000  ,00000106  ,/yaffs0 
 +[000010103ms] 09:  056c0000  ,0000f868  ,00140000  ,3cd00000  ,3cd00000  ,00000000  ,0000002c  ,00000104  ,FastBoot 
 +[000010114ms] 0a:  05800000  ,00390800  ,00480000  ,3ce40000  ,3ce40000  ,00000000  ,0000002c  ,00000105  ,kernel 
 +[000010124ms] 0b:  05c80000  ,0337e000  ,03e80000  ,00000000  ,00000000  ,00004401  ,0000002b  ,00000107  ,/yaffs1 
 +[000010134ms] 0c:  09b00000  ,00000000  ,01100000  ,00000000  ,00000000  ,00004001  ,00000000  ,00000109  ,/yaffs3 
 +[000010144ms] 0d:  0ac00000  ,00d53000  ,06200000  ,00000000  ,00000000  ,00004001  ,0000002a  ,00000111  ,/yaffs4 
 +[000010154ms] 0e:  10e00000  ,00000000  ,02000000  ,00000000  ,00000000  ,00004401  ,00000000  ,00000108  ,/yaffs2 
 +[000010164ms] 0f:  12e00000  ,00000000  ,00000000  ,00000000  ,00000000  ,00004001  ,00000000  ,00000113  ,/yaffs6 
 +[000010174ms] 10:  12e00000  ,00000000  ,0c800000  ,00000000  ,00000000  ,00004401  ,00000000  ,00000112  ,/yaffs5 
 +[000010185ms] 11:  1f600000  ,00000000  ,00000000  ,00000000  ,00000000  ,00004000  ,00000000  ,0000010c  ,cdromiso 
 +[000010195ms] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
 +[000010205ms] Creating 5 MTD partitions on "NANDC_V4.00": 
 +[000010210ms] 0x000005c80000-0x000009b00000 : "/yaffs1" 
 +[000010277ms] Test --fixed_fs_partitions Partition 
 +[000010286ms] Current badblocks   21, offset=0x5c80000 summay count=0 
 +[000010314ms] Current badblocks  108, offset=0x5c80000 summay count=0 
 +[000010356ms] 0x000009b00000-0x00000ac00000 : "/yaffs3" 
 +[000010378ms] Test --fixed_fs_partitions Partition 
 +[000010401ms] 0x00000ac00000-0x000010e00000 : "/yaffs4" 
 +[000010502ms] Test --fixed_fs_partitions Partition 
 +[000010541ms] Current badblocks  140, offset=0xac00000 summay count=0 
 +[000010573ms] Current badblocks  246, offset=0xac00000 summay count=0 
 +[000010616ms] 0x000010e00000-0x000012e00000 : "/yaffs2" 
 +[000010653ms] Test --fixed_fs_partitions Partition 
 +[000010690ms] 0x000012e00000-0x00001f600000 : "/yaffs5" 
 +[000010891ms] Test --fixed_fs_partitions Partition 
 +[000011095ms] A Core NVIM Init Begin! 
 +[000011098ms] A Core NVIM Init End! 
 +[000011101ms] usbcore: registered new interface driver cdc_acm 
 +[000011107ms] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters 
 +[000011115ms] usbcore: registered new interface driver usblp 
 +[000011120ms] Initializing USB Mass Storage driver... 
 +[000011125ms] usbcore: registered new interface driver usb-storage 
 +[000011131ms] USB Mass Storage support registered. 
 +[000011136ms] usbcore: registered new interface driver usbserial 
 +[000011141ms] USB Serial support registered for generic 
 +[000011146ms] usbcore: registered new interface driver usbserial_generic 
 +[000011153ms] usbserial: USB Serial Driver core 
 +[000011157ms] USB Serial support registered for GSM modem (1-port) 
 +[000011163ms] usbcore: registered new interface driver option 
 +[000011168ms] option: v0.7.2:USB Driver for GSM modems 
 +[000011173ms] dwc_otg: version 2.94a 27-OCT-2011 
 +[000011178ms] start 0x90080000, end 0x9009ffff, id 0x2, irq 122 
 +[000011383ms] Core Release: 2.94a 
 +[000011386ms] Setting default values for core params 
 +[000011391ms] ++ Current is HSIC Controller ++ 
 +[000011595ms] Using Descriptor DMA mode 
 +[000011598ms] Periodic Transfer Interrupt Enhancement - disabled 
 +[000011604ms] Multiprocessor Interrupt Enhancement - disabled 
 +[000011609ms] OTG VER PARAM: 0, OTG VER FLAG: 0 
 +[000011614ms] dwc_otg synopsys_dwc_hsic: DWC OTG Controller 
 +[000011619ms] dwc_otg synopsys_dwc_hsic: new USB bus registered, assigned bus number 1 
 +[000011627ms] dwc_otg synopsys_dwc_hsic: irq 122, io mem 0x00000000 
 +[000011633ms] Init: Port Power? op_state=1 
 +[000011636ms] Init: Power Port (0) 
 +[000011640ms] Init: Power Port (1) 
 +[000011643ms] Init: Hsic Connect 
 +[000011646ms] Init: HSICCon (1) 
 +[000011649ms] 
 +[000011649ms]  hcd->self.controller c06d0e38 
 +[000011655ms] hub 1-0:1.0: USB hub found 
 +[000011659ms] hub 1-0:1.0: 1 port detected 
 +[000011663ms] sc_mem_crg_sc_ioremap: ioremap OK. 
 +[000011667ms] hw_jungo_init 1257: enter 
 +[000011671ms] Enter USB_UnReset 
 +[000011674ms] uw_charger_set_bypass_mode: enter 
 +[000011727ms] start 0x900c0000, end 0x900fffff, id 0x1, irq 38 
 +[000011733ms] hw_dwc_otg_record_core_if: enter core_if 0xc8bffc00 
 +[000011938ms] hub_events: is hsic hub 1 
 +[000011942ms] Core Release: 2.94a 
 +[000011945ms] Setting default values for core params 
 +[000011950ms] ++ Current is OTG Controller ++ 
 +[000011954ms] hw_dwc_otg_get_core_if: enter core_if 0xc8bffc00 
 +[000011959ms] hw_dwc_otg_init: enter 
 +[000011963ms] ios_ctrl_addr 0xc9832988, ios_ctrl_13 0xc9836834 
 +[000011968ms] *ios_ctrl_addr 0xf400be15, *ios_ctrl_13 0x0 
 +[000011973ms] hw_dwc_otg_config_vbus_gpio: config gpio[27] suceed.sc_mem_crg_sc_ioremap: already ioremap. 
 +[000012182ms] Using Descriptor DMA mode 
 +[000012186ms] Periodic Transfer Interrupt Enhancement - disabled 
 +[000012191ms] Multiprocessor Interrupt Enhancement - disabled 
 +[000012197ms] OTG VER PARAM: 0, OTG VER FLAG: 0 
 +[000012201ms] hw_dwc_otg_host_init: enter 
 +[000012205ms] uw_charger_set_bypass_mode: enter 
 +[000012255ms] dwc_otg synopsys_dwc_otg: DWC OTG Controller 
 +[000012260ms] dwc_otg synopsys_dwc_otg: new USB bus registered, assigned bus number 2 
 +[000012268ms] dwc_otg synopsys_dwc_otg: irq 38, io mem 0x00000000 
 +[000012274ms] Init: Port Power? op_state=1 
 +[000012278ms] Init: Power Port (0) 
 +[000012281ms] Init: Power Port (1) 
 +[000012285ms] hub 2-0:1.0: USB hub found 
 +[000012288ms] hub 2-0:1.0: 1 port detected 
 +[000012292ms] ++ Initialize jungo usbware ++ 
 +[000012297ms] NV: ID is 33, pItem is 0xc089ed90, Length is 4 
 +[000012302ms] NVIM: IFC Send Success! 
 +[000012385ms] hub_events: is hsic hub 0 
 +[000012495ms] NV: ID is 36, pItem is 0xc8a29dec, Length is 4 
 +[000012501ms] NVIM: IFC Send Success! 
 +[000012504ms] NV: ID is 31, pItem is 0xc071eb8c, Length is 4 
 +[000012509ms] NVIM: IFC Send Success! 
 +[000012513ms] NV: ID is 50071, pItem is 0xc071eb90, Length is 8 
 +[000012518ms] NVIM: IFC Send Success! 
 +[000012522ms] NV: ID is 50091, pItem is 0xc071eba0, Length is 60 
 +[000012528ms] NVIM: IFC Send Success! 
 +[000012531ms] NV: ID is 50110, pItem is 0xc071eb98, Length is 8 
 +[000012537ms] NVIM: IFC Send Success! 
 +[000012540ms] NV: ID is 26, pItem is 0xc8a29de0, Length is 8 
 +[000012546ms] NVIM: IFC Send Success! 
 +[000012549ms] Enter USB_UnReset 
 +[000012552ms] uw_charger_set_bypass_mode: enter 
 +[000012607ms] +prio[120], static_prio[120], normal_prio[120], rt_priority[0] 
 +[000012614ms] -prio[19], static_prio[120], normal_prio[19], rt_priority[80] 
 +[000012621ms] +prio[120], static_prio[120], normal_prio[120], rt_priority[0] 
 +[000012628ms] -prio[19], static_prio[120], normal_prio[19], rt_priority[80] 
 +[000012634ms] +prio[120], static_prio[120], normal_prio[120], rt_priority[0] 
 +[000012641ms] -prio[19], static_prio[120], normal_prio[19], rt_priority[80] 
 +[000012650ms] usbd_get_mass_xfer_buffer:addr = 0xc08edd1c 
 +[000012655ms] usbd_get_mass_xfer_buffer:addr = 0xc08f5d3c 
 +[000012661ms] usbd_get_mass_xfer_buffer:addr = 0xc08fdd5c 
 +[000012666ms] usbd_get_mass_xfer_buffer:addr = 0xc0905d7c 
 +[000012671ms] ++ Register Dcd callback to otg core ++ 
 +[000012676ms] ++ Enable Jungo Device Core ++ 
 +[000012680ms] INFO:MEMORY_AXI_USBINOUT_ADDR share memory addr=0xf2ffe210 
 +[000012686ms] INFO:MEMORY_AXI_USBINOUT_ADDR data =0x3638ecc6 
 +[000012692ms] INFO:MEMORY_AXI_USBINOUT_ADDR share memory =0x3638ecc6 
 +[000012698ms] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode 
 +[000012698ms] 
 +[000012708ms] hw_dwc_otg_host_init: enter 
 +[000012712ms] uw_charger_set_bypass_mode: enter 
 +[000012766ms] wifi_netlink_chunnel_init:enter 
 +[000012770ms] wifi_create_ap_timer enter, use USE_HARD_TIMER_V7 
 +[000012775ms] wifi_netlink_poweron_init:enter 
 +[000012779ms] config_wifi_wakeup_host_gpio_v7: 50: enter!config_wifi_wakeup_host_gpio_v7: 200: done well! 
 +[000012789ms] mice: PS/2 mouse device common for all mice 
 +[000012796ms] using rtc device, balong_rtc, for alarms 
 +[000012800ms] balong_rtc balong_rtc.0: rtc core: registered balong_rtc as rtc0 
 +[000012808ms] hi_sdio_probe:ucHwVer=0x400 
 +[000012816ms] logger: created 64K log 'log_main' 
 +[000012821ms] logger: created 256K log 'log_events' 
 +[000012826ms] logger: created 64K log 'log_radio' 
 +[000012831ms] logger: created 64K log 'log_system' 
 +[000012837ms] emiInit --------- start emi init 
 +[000012841ms] LCD_ID0 0,LCD_ID1 0 
 +[000013195ms] balong_tft_init init success 
 +[000013199ms] *************************************************************** 
 +[000013206ms] begin to init mutilcore test: 0000 
 +[000013210ms] ============BSP_DMA_Init    in========= 
 +[000013215ms] ============BSP_DMA_Init    out========= 
 +[000013220ms] *************SSI_Init start******************* 
 +[000013225ms] *************hkadcInit start******************* 
 +[000013231ms] Set GPIO_0_30 
 +[000013233ms] I2C-HisiBIT driver 
 +[000013236ms] PCA9555 driver 
 +[000013240ms] ======= reset wifi ======== 
 +[000013243ms] ====DRV_GetCdromFlag true==== 
 +[000013248ms] Netfilter messages via NETLINK v0.30. 
 +[000013253ms] nf_conntrack version 0.5.0 (2093 buckets, 8372 max) 
 +[000013259ms] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use 
 +[000013266ms] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or 
 +[000013274ms] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. 
 +[000013280ms] ctnetlink v0.93: registering with nfnetlink. 
 +[000013286ms] nf_conntrack_rtsp v0.6.21 loading 
 +[000013290ms] IPVS: Registered protocols () 
 +[000013294ms] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) 
 +[000013301ms] IPVS: ipvs loaded. 
 +[000013304ms] IPv4 over IPv4 tunneling driver 
 +[000013309ms] nf_nat_rtsp v0.6.21 loading 
 +[000013313ms] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[000013318ms] arp_tables: (C) 2002 David S. Miller 
 +[000013323ms] TCP cubic registered 
 +[000013327ms] NET: Registered protocol family 10 
 +[000013333ms] lo: Disabled Privacy Extensions 
 +[000013337ms] tunl0: Disabled Privacy Extensions 
 +[000013341ms] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[000013347ms] IPv6 over IPv4 tunneling driver 
 +[000013351ms] sit0: Disabled Privacy Extensions 
 +[000013356ms] NET: Registered protocol family 17 
 +[000013360ms] Bridge firewalling registered 
 +[000013364ms] Ebtables v2.0 registered 
 +[000013368ms] L2TP core driver, V2.0 
 +[000013371ms] lib80211: common routines for IEEE802.11 drivers 
 +[000013377ms] PWRCTRL: system initial! 
 +[000013382ms] STMMAC driver: 
 +[000013382ms]   platform registration... 
 +[000013388ms] done! 
 +[000013390ms]   DWMAC1000 - user ID: 0x20, Synopsys ID: 0x36 
 +[000013395ms]   Enhanced descriptor structure 
 +[000013399ms] *****dev->dev_addr = 0abcde ***** 
 +[000013404ms] ****** stmmac_set_mac_addr addr = 0abcde ******* 
 +[000013409ms] ****** stmmac_set_mac_addr data = 6564 addr = c98ec040    80006564******* 
 +[000013417ms] ****** stmmac_set_mac_addr data = 63626130 addr = c98ec044        63626130******* 
 +[000013424ms] NV: ID is 36, pItem is 0xc071c4d4, Length is 4 
 +[000013430ms] NVIM: IFC Send Success! 
 +[000013433ms] stmmac:get ftm mode =1, 
 +[000013437ms] ****** dev->name = eth0 ********eth0: Scatter/Gather: off - HW checksums: off   gso off frag off 
 +[000013447ms]   eth0 - (dev. name: stmmaceth - id: 0, IRQ #40 
 +[000013447ms]   IO base addr: 0xc98ec000) 
 +[000013456ms] stmmac_drv_probe MDIO bus (id: 1)... -6 
 +[000013461ms] stmmac_mdio_register new_bus->id = 1 priv->bus_id= 1 
 +[000013471ms] STMMAC MII Bus: probed 
 +[000013474ms] eth0: PHY ID 001cc852 at 0 IRQ 0 (1:00) 
 +[000013479ms] eth0: PHY ID 001cc852 at 1 IRQ -6 (1:01) active 
 +[000013485ms] eth0: PHY ID 001cc852 at 2 IRQ 0 (1:02) 
 +[000013490ms] eth0: PHY ID 001cc852 at 3 IRQ 0 (1:03) 
 +[000013495ms] eth0: PHY ID 001cc852 at 4 IRQ 0 (1:04) 
 +[000013500ms] eth0: PHY ID 001cc852 at 5 IRQ 0 (1:05) 
 +[000013505ms] eth0: PHY ID 001cc852 at 6 IRQ 0 (1:06) 
 +[000013510ms] NV: ID is 36, pItem is 0xc8a29e34, Length is 4 
 +[000013516ms] NVIM: IFC Send Success! 
 +[000013519ms] vnet:get ftm mode =1, 
 +[000013523ms] NV: ID is 36, pItem is 0xc8a29dd4, Length is 4 
 +[000013528ms] NVIM: IFC Send Success! 
 +[000013532ms] vnet:get ftm mode =1, 
 +[000013536ms] NV: ID is 36, pItem is 0xc8a29dd4, Length is 4 
 +[000013541ms] NVIM: IFC Send Success! 
 +[000013545ms] vnet:get ftm mode =1, 
 +[000013549ms] NV: ID is 36, pItem is 0xc8a29dd4, Length is 4 
 +[000013554ms] NVIM: IFC Send Success! 
 +[000013558ms] vnet:get ftm mode =1, 
 +[000013562ms] NV: ID is 36, pItem is 0xc8a29dd4, Length is 4 
 +[000013567ms] NVIM: IFC Send Success! 
 +[000013570ms] vnet:get ftm mode =1, 
 +[000013583ms] NV: ID is 36, pItem is 0xc8a29e2c, Length is 4 
 +[000013588ms] NVIM: IFC Send Success! 
 +[000013604ms] balong_rtc balong_rtc.0: setting system clock to 1970-01-01 00:00:12 UTC (12) 
 +[000013612ms] Freeing init memory: 128K 
 +[000013616ms] *************** A-CPU MSP INIT BEGIN***************** 
 +[000013626ms] 
 +[000013626ms]  ACPU zzz SocpInit 
 +[000013631ms] INFO: SocpInit before 
 +[000013634ms] INFO: SocpInit DSP/BBP 
 +[000013637ms] INFO: SocpInitLteBBP 
 +[000013640ms] INFO: SocpInitLteDSP 
 +[000013645ms] 
 +[000013645ms]  cdm_SetCoderSrcBufList pucDataBuf1 = 0xc8d60000 
 +[000013652ms] 
 +[000013652ms]  cdm_SetCoderSrcBufList pucDataBuf2 = 0xc8d70000 
 +[000013659ms] 
 +[000013659ms]  cdm_SetCoderSrcBufList pucDataBuf3 = 0xc8d80000 
 +[000013667ms] 
 +[000013667ms]  pstCoderDestBuf->u32EncDstThrh = 4104; 
 +[000013673ms] 
 +[000013673ms] BSP_SOCP_CoderSetDestChanAttr: ID is 65536, VBuf addr is 0xC8DA0000, PBuf addr is 0x3DFA0000, Buf Len is 0x14000. 
 +[000013686ms] 
 +[000013686ms]  pstCoderDestBuf->u32EncDstThrh = 4104; 
 +[000013692ms] 
 +[000013692ms] BSP_SOCP_CoderSetDestChanAttr: ID is 65537, VBuf addr is 0xC8DC0000, PBuf addr is 0x3DFC0000, Buf Len is 0x14000. 
 +[000013705ms] 
 +[000013705ms]  pstCoderDestBuf->u32EncDstThrh = 4104; 
 +[000013711ms] 
 +[000013711ms] BSP_SOCP_CoderSetDestChanAttr: ID is 65538, VBuf addr is 0xC8DE0000, PBuf addr is 0x3DFE0000, Buf Len is 0x14000. 
 +[000013724ms] 
 +[000013724ms] BSP_SOCP_CoderAllocSrcChan: ID is 0, RD VBuf addr is 0xC8D4E000, RD PBuf addr is 0x3DF4E000. 
 +[000013735ms] 
 +[000013735ms] BSP_SOCP_CoderAllocSrcChan: ID is 1, RD VBuf addr is 0xC8D92000, RD PBuf addr is 0x3DF92000. 
 +[000013746ms] 
 +[000013746ms] BSP_SOCP_CoderAllocSrcChan: ID is 2, RD VBuf addr is 0xC8D96000, RD PBuf addr is 0x3DF96000. 
 +[000013757ms] 
 +[000013757ms] BSP_SOCP_CoderAllocSrcChan: ID is 3, RD VBuf addr is 0xC8D9A000, RD PBuf addr is 0x3DF9A000. 
 +[000013768ms]  cdm_DecoderSrcBlockBufInit g_pucDecoderSrcBlockBuf[0] = c8d9c000,phys=0xc8d9c000 
 +[000013776ms]  cdm_DecoderSrcBlockBufInit g_pucDecoderSrcBlockBuf[1] = c8200000,phys=0xc8200000 
 +[000013784ms]  cdm_DecoderSrcBlockBufInit g_pucDecoderSrcBlockBuf[2] = c8204000,phys=0xc8204000 
 +[000013793ms]  cdm_DecoderSrcBlockBufInit g_pucDecoderSrcBlockBuf[3] = c8208000,phys=0xc8208000 
 +[000013801ms] 
 +[000013801ms] BSP_SOCP_CoderAllocSrcChan: ID is 4, RD VBuf addr is 0xC8230000, RD PBuf addr is 0x3D430000. 
 +[000013812ms] 
 +[000013812ms]  GU_OamSocpCoderSrcAInit ulRet = 0x0 
 +[000013818ms] 
 +[000013818ms]  GU_OamSocpCoderSrcAStart ulRet = 0x0 
 +[000013824ms] *------------ A-CPU UE_Root START------------------- 
 +[000013830ms] 
 +[000013830ms] ---------------------NV_Init Start----------------------------- 
 +[000013869ms] 
 +[000013869ms] ---------------------NV_Init End----------------------------- 
 +[000013878ms] 
 +[000013878ms]  GU_OamAcpuPortInit 0x0 
 +[000013883ms] **********DRV_GET_WIFI_SUPPORT = 0 *******Sock_IsEnable = 0 ******************************************* 
 +[000013893ms] 
 +[000013893ms] OM_AcpuSelfTaskReg: Reg the OMPrintf Taskdms_TcpIpInit 
 +[000013903ms] dms_TcpIpInit 
 +[000013925ms] BindListenTcpSocket 11111 
 +[000014077ms] *------------ A-CPU UE_Root END------------------- 
 +[000014086ms] end log trace.[ on early-init ] 
 +[ on init ] 
 +[ on fs ] 
 +[ on post-fs ] 
 +[ on 
 +boot ] 
 +[ service ueventd ] 
 +[ service balonginit ] 
 +[000014515ms] AT_RcvAtMmaUsimStatusInd set g_stAtUsimStatusCtx.ucRsv[0] = 1 
 +[000014557ms] Reg PCSC Func. 
 +[000014559ms] Update Card Status: 0 . 
 +[000014640ms] yaffs: dev is 32505859 name is "mtdblock3" rw 
 +[000014645ms] yaffs: passed flags "" 
 +[000014648ms] yaffs: Attempting MTD mount of 31.3,"mtdblock3" 
 +[000016508ms] yaffs_read_super: isCheckpointed 0 
 +[000016513ms] yaffs: dev is 32505856 name is "mtdblock0" rw 
 +[000016518ms] yaffs: passed flags "" 
 +[000016521ms] yaffs: Attempting MTD mount of 31.0,"mtdblock0" 
 +[000016595ms] yaffs: restored from checkpoint 
 +[000016599ms] yaffs_read_super: isCheckpointed 1 
 +[000016626ms] yaffs: dev is 32505857 name is "mtdblock1" rw 
 +[000016631ms] yaffs: passed flags "" 
 +[000016634ms] yaffs: Attempting MTD mount of 31.1,"mtdblock1" 
 +[000017471ms] yaffs_read_super: isCheckpointed 0 
 +[000017476ms] yaffs: dev is 32505858 name is "mtdblock2" rw 
 +[000017481ms] yaffs: passed flags "" 
 +[000017484ms] yaffs: Attempting MTD mount of 31.2,"mtdblock2" 
 +[000017510ms] yaffs: restored from checkpoint 
 +[000017514ms] yaffs_read_super: isCheckpointed 1 
 +^^^^^^^^^start:atchannel_proxy_proc^^^^^^ 
 +ChannelProxy_ClientMng_CreateServer server fd: 5 
 +ChannelProxy_ClientMng_CreateServer server fd: 6 
 +AtProxy_ChannelCtrl_OpenChannel /dev/appvcom 
 +AtProxy_ChannelCtrl_OpenChannel successfully 
 +AtProxy_init complete 
 +[000018330ms] dwc_otg_hcd_handle_port_intr: enter 1 1 1403 
 +[000018346ms] hub_events: is hsic hub 1 
 +[000018349ms] hub_port_connect_change: enter which hcd 1 
 +[000018506ms] Indeed it is in host mode hprt0 = 00001501 
 +[000018571ms] dwc_otg_hcd_handle_port_intr: enter 0 1 100d 
 +[000018696ms] usb 1-1: new high speed USB device using dwc_otg and address 2 
 +[000018703ms] Indeed it is in host mode hprt0 = 00001101 
 +[000018708ms] dwc_otg_hcd_handle_port_intr: enter 0 1 1109 
 +[000018773ms] dwc_otg_hcd_handle_port_intr: enter 0 1 100d 
 +Tue Jan  1 00:00:00 UTC 2013 
 +[000018923ms] hub_events: is hsic hub 1 
 +mknod /dev/bhal c 250 0 
 +mknod /dev/i2c_pca c 247 0 
 +now in wifi release 
 +port 10, state 0x 1 
 +Segmentation fault 
 +port 9, state 0x 1 
 +Segmentation fault 
 +normal mode, no need to load RF wifi 
 +WLAN: the C version of software is C00 
 +WLAN: no need load high power wifi nvram 
 +[000020396ms] Boosting BK  traffic to BE (wl_boost_bk) 1 
 +[000020776ms] bcm_rpc_up: waiting to be connected 
 +[000020781ms] bcm_rpc_buf_recv_mgn_high: Recvd:3 Version: 0x61ead00 
 +[000020781ms] State: 3 Session:105 
 +[000020790ms] bcm_rpc_buf_recv_mgn_high: Reason: 0 Dongle Version: 0x61ead00 
 +[000020797ms] bcm_rpc_buf_recv_mgn_high: Connected! 
 +[000020811ms] wl0: Broadcom BCMa8e4 802.11 Wireless Controller 6.30.173 (r370177 WLTEST) 
 +[000020819ms] usbcore: registered new interface driver dbus_usbdev 
 +^^^^^^^^^^^^start:flow_count ^^^^^^^^^^^^ 
 +^^^^^^^^^^flow_count entry^^^^^^^^^^^^^ 
 +*****************ENTER mic_proc now ...****************8 
 +Start mic_proc now ... 
 +load cfm ok. 
 +RestoreFlag: 0, not need restore 
 +MicEncryptPinCodeChk DB PIN:  len: 0! 
 +************************Write db to flash now ... 
 +MicEncryptPinCodeChk DE PIN: ! 
 +Data_AesEncrypt randStr:E3WttSDt 
 +Data_AesEncrypt randStr:E3WttSDt 
 +************************Write db to flash now ... 
 +Open update_info file [/data/userdata/update_info.bin] failed! 
 +Not multi upgrade process, start cms. 
 +log: symbol lookup error: /lib/libhttpapi.so: undefined symbol: ssl_default_ciphers
  
-press space key to enter bootrom+ ########^^^^start:status_light ########^^^^ 
-Start fromvxWorks Kernel. +LOGExistNandlog  find nandflash! 
->>loadingVxWorks ... success. +---readAllRes begin--- 
->>loadingFastBoot ... success.+---readAllRes end--- 
 +killallhttpupg: no process killed 
 +[000024721ms] received netlink message payload from pid 168:0:16:10 
 +##sendmsg return 16, errno 17. 
 +ethapi: ifconfig eth0 down
  
-hw main id:00000400, sub id:00000001activate_fastboot...0x3CD00000 + current sleep count : [604800] 
-Starting from entry0x30004000 +ethapi: ifconfig eth0 hw ether 4C:8B:EF:80:1C:3F 
-0.000000Linux version 2.6.35.(q81003564@MBB-V7R1-CPE) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #PREEMPT Mon Jun 13:50:16 CST 2013 +ethapi: ifconfig eth0 up 
-0.000000CPUARMv7 Processor [413fc090revision 0 (ARMv7), cr=18c53c7f +[000024920ms] phy_id = 1:01 
-[ 0.000000CPUVIPT nonaliasing data cache, VIPT nonaliasing instruction cache +[000024923ms] phy_id = 1:02 
-[ 0.000000] MachineHisilicon Balong +[000024925ms] phy_id = 1:03 
-0.000000Ignoring unrecognised tag 0x4d534d70 +[000024936ms] phy_id = 1:04 
-[ 0.000000Memory policyECC disabled, Data cache writeback +[000024940ms] mac int: 40 
-[000005940msBuilt zonelists in Zone order, mobility grouping onTotal pages36576 +[000024942ms] *******priv->is_gmac = 1  priv->dev->mtu =1500 tx_coe = 0******* 
-[000005941msKernel command lineroot=/dev/ram0 rw console=ttyAMA0,115200 console=uw_tty0 rdinit=/init mem=144m +[000024956ms] **stmmac_dma_operation_mode 3*** 
-[000005941msPID hash table entries1024 (order: 0, 4096 bytes) +ethapi: ifconfig eth0 promisc 
-[000005941msDentry cache hash table entries32768 (order: 5, 131072 bytes+[000025005ms] device eth0 entered promiscuous mode 
-[000005942msInode-cache hash table entries16384 (order: 4, 65536 bytes+ethapi: ifconfig eth0 allmulti 
-[000005957msMemory144MB = 144MB total +ethapi: ifconfig eth0.2 down 
-[000005957msMemory133780k/133780k available, 13676k reserved, 0K highmem +ethapi: ifconfig eth0.2 hw ether 4C:8B:EF:80:1C:3F 
-[000005957msVirtual kernel memory layout+ethapiifconfig eth0.2 up 
-[000005957msvector 0xffff0000 - 0xffff1000 4 kB+[000025195ms] broadcom ctf init==================*****====================== 
-[000005957msfixmap 0xfff00000 - 0xfffe0000 896 kB+[000025202ms] broadcom ctf devname eth0.
-[000005957msDMA 0xff600000 - 0xffe00000 8 MB+[000025206ms] 
-[000005957msvmalloc 0xc9800000 - 0xf0000000 616 MB+[000025206ms]  bcmgenet_desc_rx: ctf attach ok !!!!!! g_cih = 0xc807a180 
-[000005957mslowmem 0xc0000000 - 0xc9000000 144 MB+[000025216ms] ctf register ok 
-[000005957msmodules 0xbf000000 - 0xc0000000 16 MB+ethapi: ifconfig eth0.allmulti 
-[000005957ms.init 0xc0008000 - 0xc0028000 128 kB+ethapi: ifconfig eth0.3 down 
-[000005958ms.text 0xc0028000 - 0xc06ca000 (6792 kB+ethapi: ifconfig eth0.3 hw ether 4C:8B:EF:80:1C:3F 
-[000005958ms] .data 0xc06ca000 0xc0701520 222 kB+ethapi: ifconfig eth0.3 up 
-[000005958msSLUB: Genslabs=11HWalign=32Order=0-3MinObjects=0, CPUs=1Nodes=+[000025351ms] broadcom ctf init==================*****====================== 
-[000005958msPreemptable hierarchical RCU implementation+[000025362ms] broadcom ctf devname eth0.3 
-[000005958msRCU-based detection of stalled CPUs is disabled+[000025365ms] 
-[000005958msVerbose stalled-CPUs detection is disabled+[000025365ms]  bcmgenet_desc_rx: ctf attach ok !!!!!! g_cih = 0xc807a000 
-[000005958msNR_IRQS:160 +[000025373ms] ctf register ok 
-[000005958msConsolecolour dummy device 80x30 +ethapi: ifconfig eth0.3 allmulti 
-[000005958msCalibrating delay loop... 897.84 BogoMIPS (lpj=4489216) +ethapi: ifconfig eth0.4 down 
-[000006218mspid_maxdefault4096 minimum301 +ethapi: ifconfig eth0.4 hw ether 4C:8B:EF:80:1C:3F 
-[000006218msMount-cache hash table entries512 +ethapi: ifconfig eth0.4 up 
-[000006218msCPUTesting write buffer coherencyok +[000025475ms] broadcom ctf init==================*****====================== 
-[000006219ms] start log trace+[000025482ms] broadcom ctf devname eth0.4 
-[000006223msNETRegistered protocol family 16 +[000025485ms] 
-[000006224msSerialBalongV7R1 UART driver +[000025485ms]  bcmgenet_desc_rx: ctf attach ok !!!!!! g_cih = 0xc807a600 
-[000006224msdev:uart0ttyAMA0 at MMIO 0x90007000 (irq = 102is a Balong rev0 +[000025493ms] ctf register ok 
-[000006435msconsole [ttyAMA0enabled +ethapi: ifconfig eth0.4 allmulti 
-[000006461msbiocreate slab at +ethapi: ifconfig eth0.5 down 
-[000006465mshi_gpio_probe:gpio sync in acore+ethapi: ifconfig eth0.5 hw ether 4C:8B:EF:80:1C:3F 
-[000006469mshi_gpio_probe:gpio sync over+ethapi: ifconfig eth0.5 up 
-[000006474msSCSI subsystem initialized +[000025596ms] broadcom ctf init==================*****====================== 
-[000006478msenter Acpu-softtimer-modeule-init!!! +[000025603ms] broadcom ctf devname eth0.5 
-[000006482mssofttimer_module_start_success-,1-- >>>>>>>>>>>>>> +[000025607ms] 
-[000006488msstart create the softtimer thread!!! +[000025607ms]  bcmgenet_desc_rx: ctf attach ok !!!!!! g_cih = 0xc807a300 
-[000006492msend the Acpu_softtimer_init() !!! +[000025615ms] ctf register ok 
-[000006497msusbcoreregistered new interface driver usbfs +ethapi: ifconfig eth0.5 allmulti 
-[000006503msusbcoreregistered new interface driver hub +[000025663ms] NV: ID is 6, pItem is 0xbee6e548, Length is 20 
-[000006508msusbcoreregistered new device driver usb +[000025668ms] NVIM: IFC Send Success! 
-[000006513ms] *************************************************************** +rfswap already exist! 
-[000006520msbegin to init mutilcore0000 +Using intrapositioned negation (`--option ! this`is deprecated in favor of extrapositioned (`! --option this`). 
-[000006524mshw idmain,0x400sub,0x1 +bridge api: brctl addbr br0 
-[000006528ms] ===== beg mem usr function ===== +bridge api: brctl stp br0 off 
-[000006532msbegin to init mutilcore222 +bridge api: brctl setfd br0 0 
-[000006536msstart BSP_ICC_Init +bridge api: brctl addgroup br0 0 
-[000006539msg_pstIccCtrlChan = 0xf2fc02c0 +add group failed: Operation not supported 
-[000007098ms##### icc init success!, cnt=1971, connet=1 +bridge api: brctl setbrgroupmacln br0 0 1 
-[000007103msend BSP_ICC_Init +set group 0 mac learning disable in br0 failed: Operation not supported 
-[000007106msbegin to init mutilcore333 +lanapi: ifconfig eth0.2 up 
-[000007110msbegin to init mutilcore444 +lanapi: brctl addif br0 eth0.2 
-[000007113msBSP_MODU_IFCP +[000026432ms] device eth0.2 entered promiscuous mode 
-IFC Process init success+lanapi: ifconfig br0 192.168.1.netmask 255.255.255.0 broadcast 192.168.1.255 up 
-[000008606msA:start icc cshell... +[000026467ms] br0: port 1(eth0.2entering forwarding state 
-[000008609mscshell_icc_open success,cshell_udi_handle is 5898241 +[000026472ms] br0: port 1(eth0.2entering forwarding state 
-[000008615msfree_ok +lanapi: echo > /var/run/ethup 
-[000008617msthe lcr_reg is 3 +prsite fail set sockopt ! 
-[000008620mspTemp is 0xc8a90000 +[000026792ms] device wl0 entered promiscuous mode 
-[000008623msUDI_BUILD_DEV_ID is 0x300 +[000026886ms] br0: port 2(wl0) entering forwarding state 
-[000008626msstart NVM_Init +[000026891ms] br0: port 2(wl0) entering forwarding state 
-[000008629msMSP_IPC udi_open Start +wl0: WLC_SET_VAR(apsta): Operation not supported 
-[000009297msMSP_IPC udi_open End Handle 5a0002 +wl0: cmd=231: Operation not supported 
-[000009715msend NVM_Init +wl0: WLC_SET_VAR(psta): Operation not supported 
-[000009718msbegin to init mutilcore555 +wl0: WLC_SET_VAR(chanspec): Invalid argument 
-[000009721msBCM43239_WIFI_ReleaseEntering... +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
-[000009726msDRV_HSIC_ReleaseEntering ...+wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(bg_rate): Operation not supported 
 +wl0: WLC_SET_VAR(a_rate): Operation not supported 
 +wl0: WLC_SET_VAR(bg_rate): Operation not supported 
 +wl0: WLC_SET_VAR(a_rate): Operation not supported 
 +wl0: WLC_SET_VAR(bg_mrate): Operation not supported 
 +wl0: WLC_SET_VAR(a_mrate): Operation not supported 
 +wl0: WLC_SET_VAR(bg_mrate): Operation not supported 
 +wl0: WLC_SET_VAR(a_mrate): Operation not supported 
 +wl0: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported 
 +wl0: WLC_SET_VAR(nar): Operation not supported 
 +NET: Setting wl0 hw addr to 4C:8B:EF:80:1C:40 
 +NET: Setting wl0.1 hw addr to 4E:8B:EF:80:1C:41 
 +NET: Setting wl0.2 hw addr to 4E:8B:EF:80:1C:42 
 +NET: Setting wl0.hw addr to 4E:8B:EF:80:1C:43 
 +[000027299msdevice wl0 left promiscuous mode 
 +[000027303ms] br0port 2(wl0) entering forwarding state 
 +[000027593msdevice wl0 entered promiscuous mode 
 +wl0: WLC_SET_VAR(apsta): Operation not supported 
 +wl0: cmd=231: Operation not supported 
 +wl0: WLC_SET_VAR(psta): Operation not supported 
 +wl0: WLC_SET_VAR(chanspec): Invalid argument 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported 
 +wl0: WLC_SET_VAR(bg_rate): Operation not supported 
 +wl0: WLC_SET_VAR(a_rate): Operation not supported 
 +wl0: WLC_SET_VAR(bg_rate): Operation not supported 
 +wl0: WLC_SET_VAR(a_rate): Operation not supported 
 +wl0: WLC_SET_VAR(bg_mrate): Operation not supported 
 +wl0: WLC_SET_VAR(a_mrate): Operation not supported 
 +wl0: WLC_SET_VAR(bg_mrate): Operation not supported 
 +wl0: WLC_SET_VAR(a_mrate): Operation not supported 
 +wl0: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported 
 +wl0: WLC_SET_VAR(nar): Operation not supported 
 +NET: Setting wl0 hw addr to 4C:8B:EF:80:1C:40 
 +NET: Setting wl0.1 hw addr to 4E:8B:EF:80:1C:41 
 +NET: Setting wl0.2 hw addr to 4E:8B:EF:80:1C:42 
 +NET: Setting wl0.3 hw addr to 4E:8B:EF:80:1C:43 
 +[000027915msbr0port 2(wl0) entering forwarding state 
 +[000027920ms] br0: port 2(wl0) entering forwarding state 
 +wl0: WLC_GET_VAR(psta_if): Operation not supported 
 +wl0: WLC_GET_VAR(psta_if): Operation not supported 
 +acsd:  acsd mode is 1,min is 1, max  is 9 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: scan in progress ... 
 +acsd: selected channel spec: 0x1006 
 +wl0: WLC_GET_VAR(psta_if): Operation not supported 
 +/home/zqc/src/43236/173/src/../src/wps/brcm_apps/linux/wps_linux_main.c: wps_monitor stop, flag:0 
 +nvcommit file:/app/huawei_wifi.txt 
 +ATP_DBGetObjectBySeqNum hosts failed. 
 +ethapibrctl addif br0 eth0.2 
 +ethapi: brctl addgroupports br0 eth0.
 +add group ports failed: Operation not supported 
 +ethapi: ethcmd eth0 lanchip enable port 3 
 +sh: ethcmd: not found 
 +ethapi: ifconfig eth0.2 up 
 +ethapi: brctl addif br0 eth0.3 
 +[000032176msdevice eth0.3 entered promiscuous mode 
 +[000032181ms] br0: port 3(eth0.3) entering forwarding state 
 +[000032186ms] br0: port 3(eth0.3) entering forwarding state 
 +ethapi: brctl addgroupports br0 eth0.
 +add group ports failed: Operation not supported 
 +ethapi: ethcmd eth0 lanchip enable port 2 
 +sh: ethcmd: not found 
 +ethapi: ifconfig eth0.3 up 
 +ethapi: brctl addif br0 eth0.4 
 +[000032279msdevice eth0.4 entered promiscuous mode 
 +[000032284ms] br0port 4(eth0.4) entering forwarding state 
 +[000032290msbr0: port 4(eth0.4) entering forwarding state 
 +ethapi: brctl addgroupports br0 0 eth0.4 
 +add group ports failed: Operation not supported 
 +ethapi: ethcmd eth0 lanchip enable port 1 
 +sh: ethcmd: not found 
 +ethapi: ifconfig eth0.4 up 
 +ethapibrctl addif br0 eth0.5 
 +[000032398msdevice eth0.5 entered promiscuous mode 
 +[000032403ms] br0port 5(eth0.5) entering forwarding state 
 +[000032408msbr0port 5(eth0.5) entering forwarding state 
 +ethapibrctl addgroupports br0 eth0.5 
 +add group ports failed: Operation not supported 
 +ethapi: ethcmd eth0 lanchip enable port 0 
 +sh: ethcmd: not found 
 +ethapi: ifconfig eth0.5 up 
 +ethapi: ifconfig br0 down 
 +[000032516msbr0port 5(eth0.5) entering forwarding state 
 +[000032522msbr0port 4(eth0.4) entering forwarding state 
 +[000032527msbr0port 3(eth0.3) entering forwarding state 
 +[000032532msbr0port 2(wl0) entering forwarding state 
 +[000032537msbr0port 1(eth0.2) entering forwarding state 
 +ethapi: ifconfig br0 up 
 +[000032568msbr0port 5(eth0.5entering forwarding state 
 +[000032573msbr0port 5(eth0.5entering forwarding state 
 +[000032578msbr0port 4(eth0.4entering forwarding state 
 +[000032584msbr0port 4(eth0.4entering forwarding state 
 +[000032589msbr0port 3(eth0.3entering forwarding state 
 +[000032594msbr0port 3(eth0.3entering forwarding state 
 +[000032599msbr0port 2(wl0entering forwarding state 
 +[000032604msbr0port 2(wl0entering forwarding state 
 +[000032610msbr0: port 1(eth0.2) entering forwarding state 
 +[000032615ms] br0port 1(eth0.2) entering forwarding state 
 +ethapi: arp -c br0 -i br0 
 +[000032647ms] arp uses obsolete (PF_INET,SOCK_PACKET) 
 +************************Write db to flash now ... 
 +Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`). 
 +Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`). 
 +[000032993ms] 
 +[000032993ms] Warning!!! mac addr has not been setplease set it. 
 +[000033002ms] 
 +[000033002ms] Warning!!! mac addr has not been setplease set it. 
 +
 +atp: not support krnl version:[2.6.35.7]default:[2.6.20] 
 +^^^^^^^WanClearFiles^^^^^^^^^ 
 +DNS tcp Init 
 +kill: cannot kill pid 838: No such process 
 +ifconfig: SIOCSIFADDR: No such device 
 +WanUpdateMtu:ifconfig  mtu 1500 
 +ifconfig: SIOCSIFADDR: No such device 
 +WanUpdateMtu:ifconfig  mtu 1500 
 +ifconfig: SIOCSIFADDR: No such device 
 +WanUpdateMtu:ifconfig  mtu 1500 
 +0 
 +[000039610ms] RNIC_WriteOnDemandFile:acModeTemp 0 
 +[000039610ms]  len is 2 
 +
 +
 +Set Level Right,But This Right is Error! 
 +Set Level Right,But This Right is Error! 
 +Set Level Right,But This Right is Error! 
 +Set Level Right,But This Right is Error! 
 + 
 + current dos block switch state: [1
 +
 +
 + 
 +Current sntp process is 892! 
 +killall: ddnsc: no process killed 
 +bridge api: brctl enableigmpsnooping 1 
 +enable igmp snooping failed: Operation not supported 
 +enable igmp snooping failed: Operation not supported 
 +pulObjValue [10][/app/curcfg.xml][00141C08] 
 +CMO_VOICE_X_PSTNENABLE[00000000] 
 +CMO_VOICE_X_PSTNCLIPENABLE[00000000] 
 +CMO_VOICE_X_PSTNNUMBER[00144188] 
 +CMO_VOICE_X_UMTSENABLE[00000001] 
 +CMO_VOICE_X_UMTSCLIPENABLE[00000001] 
 +CMO_VOICE_X_UMTSNUMBER[00144178] 
 +CMO_VOICE_X_CALLALLPORTSPREFIX[00144198] 
 +VoiceServiceInit 1 1 [**9] 
 +[000040852ms] si32178 driver init, build number is: 201211271715 
 +[000040867ms] si32178_probe start! 
 +[000040870ms] get_countryType: start...
 +[000040874msget_countryType: end...
 +[000040887msg_Country_Type = 3 
 +[000040890ms] enter SlicPclkFsyncInit 
 +[webnotify.c ATP_LTE_NOTIFY_Init:340]  =======ATP_LTE_NOTIFY_Init  start====================== 
 +[000040998msinputsi32178 as /devices/platform/si32178/input/input0 
 +[000041005msenter SlicSioInit 
 +[000041009ms] g_ulSioBaseAddr=0xca31a000 
 +[webnotify.c ATP_LTE_NOTIFY_Init:392]  into ATP_LTE_NOTIFY_Init,get the num:3,IPaddress: 
 +[webnotify.c ATP_LTE_NOTIFY_Init:412]  the 0 record,pushable:1,timelen:168,period:
 +[webnotify.c ATP_LTE_NOTIFY_Init:412]  the 1 record,pushable:1,timelen:168,period:0 
 +[webnotify.c ATP_LTE_NOTIFY_Init:412 the 2 record,[000041058ms] After reset FIFO:
 +pushable:0,timelen:168,period:0 
 +[000041077msAfter en rx_tx FIFO:0 
 +[000041080msInitializing ProSLIC interface 
 +[webnotify.c ATP_LTE_NOTIFY_ENABLE:591]  ===============ATP_LTE_NOTIFY_ENABLE start================= 
 +[webnotify.c ATP_LTE_NOTIFY_ENABLE:598]  ===============ATP_LTE_NOTIFY_ENABLE end================= 
 +[webnotify.c ATP_LTE_NOTIFY_Init:428 =======ATP_LTE_NOTIFY_Init  end====================== 
 +start ATP_LAN_MONITOR! 
 +enter lanmonitor process! 
 +[ss] 2 
 +Lan Recover 1 Times 
 +[000041397ms] yaffs: dev is 32505860 name is "mtdblock4" rw 
 +[000041402ms] yaffs: passed flags "" 
 +[000041406ms] yaffs: Attempting MTD mount of 31.4,"mtdblock4" 
 +[000041455msyaffsrestored from checkpoint 
 +[000041460msyaffs_read_superisCheckpointed 1 
 +-----Commapp_LogSaveAll------------currentTime is:2013-01-01 00:00:22 
 +[000041507msbr0port 1(eth0.2) entering forwarding state 
 +[000041577ms] br0port 3(eth0.3entering forwarding state 
 +self check begin 
 +[000041687msbr0: port 4(eth0.4) entering forwarding state 
 +self check end 
 + 
 + sshd: ATP_MIC_SockSvrAppendSock success! 
 +[000041782msbr0: port 5(eth0.5) entering forwarding state 
 +[000041937ms============================================================= 
 + 
 + Start 'multiupg' process! 
 + 
 + Start 'upgprocess' process! 
 + 
 + Start 'sms' process! 
 + g_Equip_Mode_value = 0 
 +the file [/data/userdata/upgrade_phase] exist! 
 +success to lock the file [/data/userdata/upgrade_phase]! 
 +unlock file: [/data/userdata/upgrade_phase] 
 + 
 + GetFileIntValue : [0], get str : [
 +
 +the file [/data/userdata/all_upg_stateexist! 
 +success to lock the file [/data/userdata/all_upg_state]! 
 + [webnotify.c ATP_LTE_NOTIFY_EFFECT:617]  === ATP_LTE_NOTIFY_EFFECT ADD === 
 +unlock file: [/data/userdata/all_upg_state] 
 + 
 + GetFileIntValue [19], get str : [19 
 +
 +[000042511ms] Si3217x : Channel 0 : VBAT Up = 59.559 v 
 +[sys-cmd-check]flash is OK 
 +[sys-cmd-check]modem is OK 
 +cat: can't open 'proc/driver/si32178': No such file or directory 
 +[sys-cmd-check]SLIC is NOK 
 +conntrack v1.0.1 (conntrack-tools): connection tracking table has been emptied. 
 +[webnotify.c ATP_LTE_ROAM_DoNotify_Check:581 ATP_LTE_ROAM_DoNotify_Check not need to push smsit is not upgrade status 
 +Recvd netlink msg now ... 
 +Netlink msg [7] LAN Port with data len 0. 
 +[000043021ms] NV: ID is 36, pItem is 0xc7e89df4, Length is 4 
 +[000043026ms] NVIM: IFC Send Success! 
 + 
 + if.ifr_name :eth0.2  status=0 
 + lanapi: ifconfig eth0.2 down 
 +[sys-cmd-check]i2c is OK 
 +[000043132msphy_id = 1:01 
 +[000043134msphy_id = 1:02 
 +[000043152msphy_id = 1:03 
 +[000043154msphy_id = 1:04 
 +[000043168msmac int40 
 +[000043170ms] *******priv->is_gmac = 1  priv->dev->mtu =1500 tx_coe = 0******* 
 +[000043197ms] **stmmac_dma_operation_mode 3*** 
 +[000043201msADDRCONF(NETDEV_UP)eth0: link is not ready 
 +[000043218msNVID is 36pItem is 0xc7e89df4Length is 4 
 +[000043224msNVIM: IFC Send Success! 
 + 
 + if.ifr_name :eth0.3  status=
 + lanapi: ifconfig eth0.3 down 
 +[000043301msbr0port 1(eth0.2) entering forwarding state 
 +[000043307msbr0: port 1(eth0.2) entering forwarding state 
 +[000043325msNV: ID is 36, pItem is 0xc7e89df4, Length is 4 
 +[000043357msNVIM: IFC Send Success! 
 + 
 + if.ifr_name :eth0.4  status=
 + lanapi: ifconfig eth0.4 down 
 +[000043409msbr0: port 3(eth0.3) entering forwarding state 
 +[000043414msbr0port 3(eth0.3) entering forwarding state 
 +[000043458msNVID is 36, pItem is 0xc7e89df4, Length is 4 
 +[000043463msNVIM: IFC Send Success! 
 + 
 + if.ifr_name :eth0.5  status=0 
 + lanapi: ifconfig eth0.5 down 
 +[000043556msbr0port 4(eth0.4) entering forwarding state 
 +[000043561ms] br0: port 4(eth0.4) entering forwarding state 
 +Cms netlink msg 7 finished
 + 
 +Open /proc/proc_user_datacard file error. 
 + 
 +Open /proc/proc_user_printer file error. 
 +Recvd netlink msg now ... 
 +Netlin[000043682msbr0: port 5(eth0.5) entering forwarding state 
 +[000043687ms] br0: port 5(eth0.5) entering forwarding state 
 +k msg [7] LAN Port with data len 0. 
 +[000043711ms] NV: ID is 36pItem is 0xc7e89df4, Length is 4 
 +[000043727msNVIM: IFC Send Success! 
 + 
 + if.ifr_name :eth0.2  status=0 
 + lanapi: ifconfig eth0.2 down 
 +[000043838msbr0: port 1(eth0.2) entering forwarding state 
 +[000043846msNV: ID is 36, pItem is 0xc7e89df4, Length is 4 
 +[000043857msNVIM: IFC Send Success! 
 + 
 + if.ifr_name :eth0.3  status=0 
 + lanapi: ifconfig eth0.3 down 
 +[000043927msbr0: port 3(eth0.3) entering forwarding state 
 +[000043934msNV: ID is 36, pItem is 0xc7e89df4, Length is 4 
 +[000043947msNVIM: IFC Send Success! 
 + 
 + if.ifr_name :eth0.4  status=
 + lanapi: ifconfig eth0.4 down 
 +[000044018msbr0: port 4(eth0.4) entering forwarding state 
 +[000044025msNVID is 36, pItem is 0xc7e89df4, Length is 4 
 +[000044038msNVIMIFC Send Success! 
 + 
 + if.ifr_name :eth0.5  status=0 
 + lanapi: ifconfig eth0.5 down 
 +[000044128msbr0port 5(eth0.5) entering forwarding state 
 +Cms netlink msg 7 finished. 
 + 
 + SIGALRM come in 
 +iptables: Bad rule (does a matching rule exist in that chain?). 
 +iptables: Bad rule (does a matching rule exist in that chain?). 
 +start:ledctlwifi driver ok[000045337ms] Initializing SLIC for Ch:0 
 +iptables: Bad rule (does a matching rule exist in that chain?). 
 +[000045382ms] ChInit: Reading SLIC STAT REG:0xdf 
 +[000045386ms] delay 1500ms before Enable Interrupts...
 </nowiki></WRAP> </nowiki></WRAP>
  
  • Last modified: 2023/02/24 13:41
  • by humaita