HooToo HT-TM01, HT-TM02, HT-TM03, HT-TM04

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

  • All devices have the same Ralink RT5350F chipset. The difference between the devices is:
    • TM01: includes a 6000 mAh battery, charged via USB
    • TM02: very small form factor, powered via USB
    • TM03: MicroSDHC slot, includes a 3000 mAh battery, charged via USB
    • TM04: powered by AC connector
  • Status: see OpenWrt Forum Topics below.
    • TM01, TM02, TM04: Thanks to Ron Curry / wingspinner for his image 1) which is used by some people out in the wild on TM01, TM02 and TM04. Note that the model number (as example in LuCi) will always be “TM02”, as this is hard coded in the image
    • TM03: wingspinner's image does not work out-of-the-box, see https://forum.openwrt.org/viewtopic.php?id=58118 for the modifications.

The primary source for the original installation instructions by wingspinner is https://forum.openwrt.org/viewtopic.php?id=53014 or github/wingspinner.

  • Switch TM02/TM01 in AP mode on (small switch set to world icon)
  • Connect to it by WiFi with PW “11111111”
  • Connect to 10.10.10.254
  • Close setup wizard
  • Insert USB flash drive into the device. It should partitioned, formatted, and have enough empty space
  • Wait for a notification dialog about the inserted media (you can check it in “Explorer”)
  • Go to “System” and the upgrade menu and upload the image (it's actually it is a shell script containing a binary image)
  • WAIT, “WAIT until the timer popup times out”
  • You're done! Restart TM02/TM01.
  • Connect your PC by ethernet and go to 192.168.1.1

Official releases

Development branch (trunk)

The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile.

Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI

Partitions from “cat /proc/mtd”:

dev:    size   ​erasesize ​ name
mtd0: 00800000 00010000 "​ALL"​
mtd1: 00030000 00010000 "​Bootloader"​
mtd2: 00010000 00010000 "​Config"​
mtd3: 00010000 00010000 "​Factory"​
mtd4: 00180000 00010000 "​Kernel_RootFS"​
mtd5: 00010000 00010000 "​params"​
mtd6: 00010000 00010000 "​user_backup"​
mtd7: 00010000 00010000 "​user"​
mtd8: 00600000 00010000 "​Rootfs"​
Layer0 mtd0
ALL
8192KiB
Layer1 mtd1
Bootloader
192KiB
mtd2
Config
64KiB
mtd3
Factory
64KiB
mtd4
Kernel_RootFS
1536KiB
mtd5
params
64KiB
mtd6
user_backup
64KiB
mtd7
user
64KiB
mtd8
Rootfs
6144KiB
  • See flash.layout for a general overview.
  • From Kernel boot log:
    [    0.530000] m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
    [    0.550000] 4 ofpart partitions found on MTD device spi32766.0
    [    0.560000] Creating 4 MTD partitions on "spi32766.0":
    [    0.570000] 0x000000000000-0x000000030000 : "u-boot"
    [    0.580000] 0x000000030000-0x000000040000 : "u-boot-env"
    [    0.590000] 0x000000040000-0x000000050000 : "factory"
    [    0.600000] 0x000000050000-0x000000800000 : "firmware"
    [    0.690000] 2 uimage-fw partitions found on MTD device firmware
    [    0.700000] 0x000000050000-0x0000001509c8 : "kernel"
    [    0.720000] 0x0000001509c8-0x000000800000 : "rootfs"
    [    0.730000] mtd: device 5 (rootfs) set to be root filesystem
    [    0.740000] 1 squashfs-split partitions found on MTD device rootfs
    [    0.750000] 0x000000370000-0x000000800000 : "rootfs_data"
  • Flash Partitions from “cat /proc/mtd
    dev:    size   erasesize  name
    mtd0: 00030000 00010000 "u-boot"
    mtd1: 00010000 00010000 "u-boot-env"
    mtd2: 00010000 00010000 "factory"
    mtd3: 007b0000 00010000 "firmware"
    mtd4: 001009c8 00010000 "kernel"
    mtd5: 006af638 00010000 "rootfs"
    mtd6: 00490000 00010000 "rootfs_data"
  • Mounted devices from “mount”:
    rootfs on / type rootfs (rw)
    /dev/root on /rom type squashfs (ro,relatime)
    /dev/mtdblock6 on /overlay type jffs2 (rw,noatime)
    overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)

Consolidated View:

Layer0 raw flash 8192 KiB
Layer1 mtd0: u-boot
192 KiB
mtd1: u-boot-env
64 KiB
mtd2: factory
64 KiB
mtd3: firmware
7872 KiB (= FlashSize-(192+64+64))
Layer2 mtd4: kernel
about 1 MiB
mtd5: rootfs
/”, OverlayFS with /overlay
Layer3 /dev/root
/rom”, SquashFS
around 2 MiB (depends on selected packages)
mtd6: rootfs_data
/overlay”, JFFS2
around 4.5 MiB
(“free” space)

Use 57600 bps:

U-Boot 1.1.3 (May 14 2014 - 12:41:02) DRAM: 32 MB Initialize usb ehci ohci find flash: MX25L6405D .*** Warning - bad CRC, using default environment ============================================ UBoot Version: 3.6.0.0 -------------------------------------------- ASIC 5350_MP (Port5<->None) DRAM_CONF_FROM: Boot-Strapping DRAM_TYPE: SDRAM DRAM_SIZE: 256 Mbits DRAM_WIDTH: 16 bits DRAM_TOTAL_WIDTH: 16 bits TOTAL_MEMORY_SIZE: 32 MBytes Flash component: SPI Flash Date:May 14 2014 Time:12:41:02 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:128, ways:4, linesz:32 ,total:16384 ##### The CPU freq = 360 MHZ #### estimate memory size =32 Mbytes . Initialize vs configure module .Initialize GPIO Input i key to enter menu 0 ........................## Booting image at 80500000 ... Image Name: Linux Kernel Image Created: 2013-11-01 5:37:54 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1442281 Bytes = 1.4 MB Load Address: 80000000 Entry Point: 80441000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80441000) ... ## Giving linux memsize in MB, 32 Starting kernel ... LINUX started... THIS IS ASIC PROC INIT OK! enter init Start rootfs mounted echo 6 > /proc/sys/kernel/printk tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel. init dev files mounted end Sun Jan 1 00:00:00 UTC 2012 Get time information first tz_minuteswest=0 Set time information offset=0 tz.tz_minuteswest=0 Get time information again tz_minuteswest=0 GMT-00:00 arch/mips/rt2880/nvram.c 472: len=0x3ffc, crc_value=0x424e4650, fb[0].env.crc=0x424e4650 arch/mips/rt2880/nvram.c 502: Same CRC Finish the check crc SSID_PREFIX:TripMateNano wireless port last two bytes:-59d4! str_buf=59D4 tmp1 = TripMateNano-59D4! Default SSID:TripMateNanarch/mips/rt2880/nvram.c 423: --> nvram_clear 0 o-59D4! arch/mips/rt2880/nvram.c 445: clear flash from 0x2004 for 0x3ffc bytes arch/mips/rt2880/nvram.c 527: --> nvram_commit 0 init net status=1 arch/mips/rt2880/nvram.c 527: --> nvram_commit 0 phy_tx_ring = 0x00762000, tx_ring = 0xa0762000 phy_rx_ring0 = 0x00763000, rx_ring0 = 0xa0763000 MAC_ADRH -- : 0x0000001c MAC_ADRL -- : 0xc21959d5 RT305x_ESW: Link Status Changed vs_port_link_status=0 RX DESC a0684000 size = 2048 <-- RTMPAllocTxRxRingMemory, Status=0 RTMP_TimerListAdd: add timer obj c0083b68! RTMP_TimerListAdd: add timer obj c0020fe4! RTMP_TimerListAdd: add timer obj c0020bb4! RTMP_TimerListAdd: add timer obj c0020f90! RTMP_TimerListAdd: add timer obj c0020fb8! RTMP_TimerListAdd: add timer obj c0021210! RTMP_TimerListAdd: add timer obj c0024104! RTMP_TimerListAdd: add timer obj c0023cd4! RTMP_TimerListAdd: add timer obj c00240b0! RTMP_TimerListAdd: add timer obj c00240d8! RTMP_TimerListAdd: add timer obj c0024330! RTMP_TimerListAdd: add timer obj c0027224! RTMP_TimerListAdd: add timer obj c0026df4! RTMP_TimerListAdd: add timer obj c00271d0! RTMP_TimerListAdd: add timer obj c00271f8! RTMP_TimerListAdd: add timer obj c0027450! RTMP_TimerListAdd: add timer obj c002a344! RTMP_TimerListAdd: add timer obj c0029f14! RTMP_TimerListAdd: add timer obj c002a2f0! RTMP_TimerListAdd: add timer obj c002a318! RTMP_TimerListAdd: add timer obj c002a570! RTMP_TimerListAdd: add timer obj c002d464! RTMP_TimerListAdd: add timer obj c002d034! RTMP_TimerListAdd: add timer obj c002d410! RTMP_TimerListAdd: add timer obj c002d438! RTMP_TimerListAdd: add timer obj c002d690! RTMP_TimerListAdd: add timer obj c0030584! RTMP_TimerListAdd: add timer obj c0030154! RTMP_TimerListAdd: add timer obj c0030530! RTMP_TimerListAdd: add timer obj c0030558! RTMP_TimerListAdd: add timer obj c00307b0! RTMP_TimerListAdd: add timer obj c00336a4! RTMP_TimerListAdd: add timer obj c0033274! RTMP_TimerListAdd: add timer obj c0033650! RTMP_TimerListAdd: add timer obj c0033678! RTMP_TimerListAdd: add timer obj c00338d0! RTMP_TimerListAdd: add timer obj c00367c4! RTMP_TimerListAdd: add timer obj c0036394! RTMP_TimerListAdd: add timer obj c0036770! RTMP_TimerListAdd: add timer obj c0036798! RTMP_TimerListAdd: add timer obj c00369f0! RTMP_TimerListAdd: add timer obj c005170c! RTMP_TimerListAdd: add timer obj c00512dc! RTMP_TimerListAdd: add timer obj c00516b8! RTMP_TimerListAdd: add timer obj c00516e0! RTMP_TimerListAdd: add timer obj c0051738! RTMP_TimerListAdd: add timer obj c0051764! RTMP_TimerListAdd: add timer obj c0051790! RTMP_TimerListAdd: add timer obj c0084088! RTMP_TimerListAdd: add timer obj c0084060! RTMP_TimerListAdd: add timer obj c0084038! RTMP_TimerListAdd: add timer obj c005a924! RTMP_TimerListAdd: add timer obj c005aa28! RTMP_TimerListAdd: add timer obj c005a94c! RTMP_TimerListAdd: add timer obj c0051c74! RTMP_TimerListAdd: add timer obj c001e468! RTMP_TimerListAdd: add timer obj c0021588! RTMP_TimerListAdd: add timer obj c00246a8! RTMP_TimerListAdd: add timer obj c00277c8! RTMP_TimerListAdd: add timer obj c002a8e8! RTMP_TimerListAdd: add timer obj c002da08! RTMP_TimerListAdd: add timer obj c0030b28! RTMP_TimerListAdd: add timer obj c0033c48! RTMP_TimerListAdd: add timer obj c0051990! Key1Str is Invalid key length(0) or Type(1) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 2b:39:24:2f:fa:ec:b9:89:8a:13:f5:bf:4f:f5:ad:e5: 3c:c5:ec:f7:dd:a4:66:7e:16:08:be:a5:e1:23:d7:96: 1. Phy Mode = 9 2. Phy Mode = 9 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff 00 00 00 01 SYNC - BBP R4 to 20MHz.l RTMP_TimerListAdd: add timer obj c0052244! Main bssid = 00:1c:c2:19:59:d4 <==== rt28xx_init, Status=0 0x1300 = 00064380 vconfig: ioctl error for rem: Invalid argument eth2.2: Setting MAC address to 00 1c c2 19 59 d5. VLAN (eth2.2): Underlying device (eth2) has same MAC, not checking promiscious mode. ifconfig: SIOCGIFFLAGS: No such device brctl: bridge br0: No such device or address switch reg write offset=14, value=5555 switch reg write offset=40, value=1001 switch reg write offset=44, value=1001 switch reg write offset=48, value=1001 switch reg write offset=4c, value=1 switch reg write offset=50, value=2001 switch reg write offset=70, value=ffffffff switch reg write offset=98, value=7f7f switch reg write offset=e4, value=7f done. ra2880stop()...Done Free TX/RX Ring Memory! Set: phy[0].reg[0] = 3900 Set: phy[4].reg[0] = 3900 Set: phy[1].reg[0] = 3900 Set: phy[2].reg[0] = 3900 Set: phy[3].reg[0] = 3900 udhcpc (v1.12.1) started Set: phy[4].reg[0] = 3100 aaaaa do_cmd_r:mkdir /tmp/led_tmp BEGIN:=======================================2483 to wait child 2486 END:=======================================2483 to wait child 2486 /etc/rc.d/rc1.d/S73ddns start /etc/rc.d/rc1.d/S75fileserv start /etc/rc.d/rc1.d/S80webd start /etc/rc.d/rc1.d/S82upnpd start /etc/rc.d/rc1.d/S99local start


Login

Username Password
admin (empty)
root FIXME: might be the timestamp when the image was created, e.g. “20080826”
cat /etc/passwd
root:$1$yikWMdhq$cIUPc1dKQYHkkKkiVpM/v/:0:0:root:/root:/bin/sh
bin:x:1:1:bin:/bin:/sbin/nologin
daemon:x:2:2:daemon:/sbin:/sbin/nologin
admin:$1$QlrmwRgO$c0iSI2euV.U1Wx6yBkDBI.:15:0:admin:/data/UsbDisk1/Volume1:/bin/sh
mail:*:8:8:mail:/var/mail:/bin/sh
nobody:x:65534:65534:Nobody:/data/UsbDisk1/Volume1:/bin/sh

System information

uname -a
Linux TM02 2.6.21 #6 Fri Nov 1 13:37:43 CST 2013 mips unknown
cat /proc/version
Linux version 2.6.21 (hsq@localhost.localdomain) (gcc version 3.4.2) #6 Fri Nov 1 13:37:43 CST 2013
cat /proc/cpuinfo
system type             : Ralink SoC
processor               : 0
cpu model               : MIPS 24K V4.12
BogoMIPS                : 239.61
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : yes
ASEs implemented        : mips16 dsp
VCED exceptions         : not available
VCEI exceptions         : not available
cat /proc/meminfo
MemTotal:        28000 kB
MemFree:          9272 kB
Buffers:          1164 kB
Cached:           7496 kB
SwapCached:          0 kB
Active:           4116 kB
Inactive:         6456 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:        1944 kB
Mapped:           1304 kB
Slab:             5892 kB
SReclaimable:     2296 kB
SUnreclaim:       3596 kB
PageTables:        260 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     14000 kB
Committed_AS:     4432 kB
VmallocTotal:  1048404 kB
VmallocUsed:      1848 kB
VmallocChunk:  1046132 kB
mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
ramfs on /var type ramfs (rw)
ramfs on /www/firmware type ramfs (rw)
ramfs on /boot/tmp type ramfs (rw)
ramfs on /usr/local/samba/var type ramfs (rw)
ramfs on /data type ramfs (rw)
ramfs on /opt type ramfs (rw)
ramfs on /dev type ramfs (rw)
ramfs on /tmp type ramfs (rw)
/proc on /proc type proc (rw)
/sys on /sys type sysfs (rw)
none on /proc/bus/usb type usbfs (rw)
ramfs on /dev type ramfs (rw)
devpts on /dev/pts type devpts (rw)
ramfs on /dev/shm type ramfs (rw)
ramfs on /dev/mapper type ramfs (rw)
ramfs on /etc type ramfs (rw)
cat /proc/devices
Character devices:
  1 mem
  2 pty
  3 ttyp
  4 /dev/vc/0
  4 tty
  4 ttyS
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
  7 vcs
 10 misc
 13 input
 21 sg
 90 mtd
100 vs_pio
108 ppp
128 ptm
136 pts
166 ttyACM
180 usb
188 ttyUSB
189 usb_device
245 ttyHS
251 nvram
253 rdm0
254 usb_endpoint

Block devices:
  1 ramdisk
  7 loop
  8 sd
 31 mtdblock
 65 sd
 66 sd
 67 sd
 68 sd
 69 sd
 70 sd
 71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
cat /proc/bus/usb/devices
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.21 ohci_hcd
S:  Product=RT3xxx OHCI Controller
S:  SerialNumber=rt3xxx-ohci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.21 ehci_hcd
S:  Product=Ralink EHCI Host Controller
S:  SerialNumber=rt3xxx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
cat /proc/ioports
000003c0-000003df : ega
b0000500-b000051f : serial
b0000c00-b0000c1f : serial
cat /proc/vmstat
nr_free_pages 2242
nr_active 1651
nr_inactive 1056
nr_anon_pages 490
nr_mapped 332
nr_file_pages 2225
nr_dirty 0
nr_writeback 0
nr_slab_reclaimable 588
nr_slab_unreclaimable 898
nr_page_table_pages 65
nr_unstable 0
nr_bounce 0
nr_vmscan_write 0
pgpgin 3796
pgpgout 0
pswpin 0
pswpout 0
pgalloc_dma 53379
pgalloc_normal 0
pgfree 55621
pgactivate 1278
pgdeactivate 0
pgfault 149540
pgmajfault 93
pgrefill_dma 0
pgrefill_normal 0
pgsteal_dma 0
pgsteal_normal 0
pgscan_kswapd_dma 0
pgscan_kswapd_normal 0
pgscan_direct_dma 0
pgscan_direct_normal 0
pginodesteal 0
slabs_scanned 0
kswapd_steal 0
kswapd_inodesteal 0
pageoutrun 0
allocstall 0
pgrotated 0
ps axuwf
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         1  0.8  1.5   3780   444 ?        Ss    2011   0:00 /sbin/init
root         2  0.0  0.0      0     0 ?        SN    2011   0:00 [ksoftirqd/0]
root         3  0.0  0.0      0     0 ?        S<    2011   0:00 [events/0]
root         4  0.1  0.0      0     0 ?        S<    2011   0:00 [khelper]
root         5  0.0  0.0      0     0 ?        S<    2011   0:00 [kthread]
root        38  0.0  0.0      0     0 ?        S<    2011   0:00  \_ [khubd]
root        35  0.0  0.0      0     0 ?        S<    2011   0:00  \_ [kblockd/0]
root        53  0.0  0.0      0     0 ?        S     2011   0:00  \_ [pdflush]
root        52  0.0  0.0      0     0 ?        S<    2011   0:00  \_ [kswapd0]
root        55  0.0  0.0      0     0 ?        S<    2011   0:00  \_ [aio/0]
root        54  0.0  0.0      0     0 ?        S     2011   0:00  \_ [pdflush]
root       681  3.5  0.0      0     0 ?        S     2011   0:04 [mtdblockd]
root       814  2.2  1.3   1204   368 ?        S<s   2011   0:02 /usr/sbin/udevd -d
root      1864  0.0  0.0      0     0 ?        S    00:00   0:00 [RtmpCmdQTask]
root      1865  0.0  0.0      0     0 ?        S    00:00   0:00 [RtmpWscTask]
root      2364  0.0  1.3   2028   376 ?        Ss   00:00   0:00 udhcpd /etc/udhcpd.conf
root      2474  0.0  1.4   2024   416 ?        S    00:00   0:00 udhcpc -i apcli0 -s /sbin/udhcpc.sh -p /var/run/udhcpc.pid
root      2488  0.0  1.4   3944   404 ?        Ss   00:00   0:00 /usr/sbin/led_control
root      2620  0.0  1.4   3944   404 ?        S    00:00   0:00  \_ /usr/sbin/led_control
root      2622  0.0  1.4   3944   404 ?        S    00:00   0:00      \_ /usr/sbin/led_control
root      2621  0.0  1.4   3944   404 ?        S    00:00   0:00      \_ /usr/sbin/led_control
root      2524  0.0  1.5   3784   428 ?        S    00:00   0:00 /usr/sbin/vstddns
root      2556  0.0  2.1   4888   604 ?        SN   00:00   0:00 /usr/sbin/fileserv -f /etc/fileserv/lighttpd.conf -m /usr/lib/files
root      2557  0.0  1.3   4888   384 ?        RN   00:00   0:00  \_ /usr/sbin/fileserv -f /etc/fileserv/lighttpd.conf -m /usr/lib/f
root      2569  0.0  1.3   4888   384 ?        RN   00:00   0:00  \_ /usr/sbin/fileserv -f /etc/fileserv/lighttpd.conf -m /usr/lib/f
root      2575  0.0  4.1   5472  1164 ?        Ss   00:00   0:00 /usr/sbin/ioos
root      2580  0.0  4.1   5472  1164 ?        S    00:00   0:00  \_ /usr/sbin/ioos
root      2581  0.0  4.1   5472  1164 ?        S    00:00   0:00      \_ /usr/sbin/ioos
root      2583  0.0  4.1   5472  1164 ?        S<   00:00   0:00      \_ /usr/sbin/ioos
root      2584  0.0  4.1   5472  1164 ?        S<   00:00   0:00      \_ /usr/sbin/ioos
root      2586  0.0  4.1   5472  1164 ?        S<   00:00   0:00      \_ /usr/sbin/ioos
root      2587  0.0  4.1   5472  1164 ?        S    00:00   0:00      \_ /usr/sbin/ioos
root      2596  0.0  1.5   3776   420 ?        S    00:00   0:00 /usr/sbin/upnpd
root      2615  0.0  0.8   2024   248 ?        Ss   00:00   0:00 telnetd
admin     2618  0.0  1.7   2036   500 ttyS1    Ss   00:00   0:00 -sh
admin     2680  0.0  1.7   1832   484 ttyS1    R+   00:01   0:00  \_ ps axuwf
root      2651  0.0  0.5   1056   152 ?        SN   00:00   0:00 owndns 55
root      2654  0.0  0.6   1068   184 ?        SN   00:00   0:00 ownhttp 85 10.10.10.254
top
CPU:   0% usr   9% sys   0% nice  90% idle   0% io   0% irq   0% softirq
Load average: 0.00 0.04 0.04
  PID  PPID USER     STAT   VSZ %MEM %CPU COMMAND
 2807  2618 admin    R     2032   7%   9% top 
 2575     1 root     S     5528  20%   0% /usr/sbin/ioos 
 2581  2580 root     S     5528  20%   0% /usr/sbin/ioos 
 2587  2580 root     S     5528  20%   0% /usr/sbin/ioos 
 2584  2580 root     S <   5528  20%   0% /usr/sbin/ioos 
 2586  2580 root     S <   5528  20%   0% /usr/sbin/ioos 
 2580  2575 root     S     5528  20%   0% /usr/sbin/ioos 
 2583  2580 root     S <   5528  20%   0% /usr/sbin/ioos 
 2557  2556 root     S N   4888  17%   0% /usr/sbin/fileserv -f /etc/fileserv/l
 2556     1 root     S N   4888  17%   0% /usr/sbin/fileserv -f /etc/fileserv/l
 2569  2556 root     S N   4888  17%   0% /usr/sbin/fileserv -f /etc/fileserv/l
 2622  2620 root     S     3944  14%   0% /usr/sbin/led_control 
 2620  2488 root     S     3944  14%   0% /usr/sbin/led_control 
 2488     1 root     S     3944  14%   0% /usr/sbin/led_control 
 2621  2620 root     S     3944  14%   0% /usr/sbin/led_control 
 2524     1 root     S     3784  14%   0% /usr/sbin/vstddns 
    1     0 root     S     3780  13%   0% /sbin/init 
 2596     1 root     S     3776  13%   0% /usr/sbin/upnpd 
 2618     1 admin    S     2036   7%   0% -sh 
 2364     1 root     S     2028   7%   0% udhcpd /etc/udhcpd.conf 
/sbin/lsmod
Module                  Size  Used by    Tainted: P  
tfat                  205680  0 
texfat                210640  0 
tntfs                 495024  0 
ls -l /
drwxr-xr-x    2 root     root          802 Aug 19  2014 bin
drwxr-xr-x    3 root     root           20 Aug 19  2014 boot
drwxr-xr-x    2 root     root            0 Jan  1  2000 data
drwxr-xr-x    6 root     root            0 Jan  1 00:00 dev
drwxr-xr-x   14 root     root            0 Jan  1 00:00 etc
drwxr-xr-x    3 root     root           20 Aug 19  2014 etc_ro
drwxr-xr-x    2 root     root            3 Aug 19  2014 home
drwxr-xr-x    6 root     root         1035 Aug 19  2014 lib
drwxr-xr-x    2 root     root            3 Aug 19  2014 media
drwxr-xr-x    2 root     root            3 Aug 19  2014 mnt
drwxr-xr-x    2 root     root            0 Jan  1  2000 opt
dr-xr-xr-x   50 root     root            0 Jan  1  2000 proc
drwxr-xr-x    2 root     root          701 Aug 19  2014 sbin
drwxr-xr-x   11 root     root            0 Jan  1  2000 sys
drwxr-xr-x    4 root     root            0 Jan  1 00:00 tmp
drwxr-xr-x    8 root     root           80 Aug 19  2014 usr
drwxr-xr-x   10 root     root            0 Jan  1 00:00 var
drwxr-xr-x    8 root     root          101 Aug 19  2014 www
ls -l /etc/
-rw-r--r--    1 root     root           10 Jan  1 00:00 TZ
drwxr-xr-x    3 root     root            0 Aug 19  2014 Wireless
-rw-r--r--    1 root     root           84 Oct 23  2013 ddns.conf
drwxr-xr-x    2 root     root            0 Aug 19  2014 dhcp
-rw-r--r--    1 root     root         5933 Aug 19  2014 dlna.png
drwxr-xr-x    3 root     root            0 Aug 19  2014 fileserv
-rw-r--r--    1 root     root          121 Aug 19  2014 firmware
-rw-r--r--    1 root     root          424 Oct 23  2013 fstab
-rw-r--r--    1 root     root          115 Oct 23  2013 group
-rw-r--r--    1 root     root          115 Oct 23  2013 group-
-rw-r--r--    1 root     root           18 Oct 23  2013 host.conf
-rw-r--r--    1 root     root            5 Aug 19  2014 hostname
-rw-r--r--    1 root     root           47 Jan  1  2000 hosts
drwxr-xr-x    2 root     root            0 Aug 19  2014 init.d
-rwxr-xr-x    1 root     root          947 Oct 23  2013 initargs
-rwxr-xr-x    1 root     root         1987 Oct 23  2013 initdisk
-rwxr-xr-x    1 root     root          737 Nov 12  2013 initnet
-rwxr-xr-x    1 root     root         1907 May 12  2014 initsh
-rwxr-xr-x    1 root     root         4333 Oct 23  2013 initsys
-rw-r--r--    1 root     root          104 Oct 23  2013 inittab
-rwxr-xr-x    1 root     root          990 Oct 23  2013 inittime
-rw-r--r--    1 root     root          264 Oct 23  2013 iosermap
-rwxr-xr-x    1 root     root           14 Oct 23  2013 ld.so.conf
-rw-r--r--    1 root     root           61 Oct 23  2013 local.conf
lrwxrwxrwx    1 root     root           42 Jan  1  2000 localtime -> ../usr/share/zoneinfo/(GMT+00:00)Greenwich
-rwxr-xr-x    1 root     root         1806 Aug 19  2014 minidlna.conf
lrwxrwxrwx    1 root     root           12 Jan  1  2000 mtab -> /proc/mounts
-rw-r--r--    1 root     root           62 Oct 23  2013 nasclient.conf
drwxr-xr-x    2 root     root            0 Aug 19  2014 newfunction
-rw-r--r--    1 root     root         1686 Oct 23  2013 nsswitch.conf
drwxr-xr-x    2 root     root            0 Aug 19  2014 ntp
-rw-r--r--    1 root     root          312 Oct 23  2013 passwd
-rw-r--r--    1 root     root          278 Oct 23  2013 passwd-
-rw-r--r--    1 root     root         6108 Oct 23  2013 protocols
drwxr-xr-x    3 root     root            0 Aug 19  2014 rc.d
-rwxr-xr-x    1 root     root         1501 Oct 23  2013 rc.local
-rw-r--r--    1 root     root           50 Oct 23  2013 resolv.conf
-rw-r--r--    1 root     root           46 Oct 23  2013 rpcserver.conf
drwxr-xr-x    2 root     root            0 Aug 19  2014 samba
-rw-r--r--    1 root     root         8192 Oct 23  2013 secrets.tdb
-rw-r--r--    1 root     root           36 Jan  1 00:00 services
-rw-r--r--    1 root     root          222 Oct 23  2013 shadow
-rw-r--r--    1 root     root          188 Oct 23  2013 shadow-
-rw-r--r--    1 root     root           17 Oct 23  2013 timecache
-rw-r--r--    1 root     root           20 Oct 23  2013 timedate
-rwxr-xr-x    1 root     root            2 Jan  1  2000 tzflag
drwxr-xr-x    4 root     root            0 Aug 19  2014 udev
-rw-r--r--    1 root     root          176 Jan  1 00:00 udhcpd.conf
-rw-r--r--    1 root     root          146 Jan  1 00:00 udhcpd.conf_bak
drwxr-xr-x    2 root     root            0 Aug 19  2014 update
drwxr-xr-x    2 root     root            0 Aug 19  2014 upnp
-rw-r--r--    1 root     root          229 Aug 19  2014 versioninfo
-rw-r--r--    1 root     root            2 Oct 23  2013 vs_swapoff_flag
-rw-r--r--    1 root     root          210 Aug 11  2014 vshttpd.conf
-rw-r--r--    1 root     root          207 Oct 23  2013 vsupload.conf
drwxr-xr-x    2 root     root            0 Aug 19  2014 webmg
lrwxrwxrwx    1 root     root            4 Jan  1  2000 www -> /www
set
HOME='/data/UsbDisk1/Volume1'
IFS='   
'
LOGNAME='admin'
PATH='/bin:/usr/bin'
PPID='1'
PS1='$ '
PS2='> '
PS4='+ '
PWD='/'
SHELL='/bin/sh'
TERM='vt102'
USER='admin'
_='/bin:/usr/bin'

Serial output when upgrading OEM firmware with wingspinner's openwrt-ramips-rt305x-ht-tm02-squashfs-factory-r42649.bin (actually a shell script) following his instructions:

[... stock firmware boot output ...] TM02 login: RTMP_TimerListAdd: add timer obj c00996d0! RTMP_TimerListAdd: add timer obj c0099884! AP SETKEYS DONE - WPA2, AuthMode(7)=WPA2PSK, WepStatus(6)=AES, GroupWepStatus(4)=TKIP Allow 16-byte CDBs and thus > 2TB scsi 0:0:0:0: Direct-Access ChipsBnk SD/MMCReader 4081 PQ: 0 ANSI: 2 sda: Spinning up disk... sda: delay 1 second ... SCSI device sda: 1959936 512-byte hdwr sectors (1003 MB) sda: Write Protect is off sda: assuming drive cache: write through SCSI device sda: 1959936 512-byte hdwr sectors (1003 MB) sda: Write Protect is off sda: assuming drive cache: write through sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Allow 16-byte CDBs and thus > 2TB scsi 1:0:0:0: Direct-Access ChipsBnk SD/MMCReader 4081 PQ: 0 ANSI: 2 SCSI device sda: 1959936 512-byte hdwr sectors (1003 MB) sda: Write Protect is off sda: assuming drive cache: write through SCSI device sda: 1959936 512-byte hdwr sectors (1003 MB) sda: Write Protect is off sda: assuming drive cache: write through sd 1:0:0:0: Attached scsi removable disk sda sd 1:0:0:0: Attached scsi generic sg0 type 0 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Allow 16-byte CDBs and thus > 2TB scsi 2:0:0:0: Direct-Access ChipsBnk SD/MMCReader 4081 PQ: 0 ANSI: 2 SCSI device sda: 1959936 512-byte hdwr sectors (1003 MB) sda: Write Protect is off sda: assuming drive cache: write through SCSI device sda: 1959936 512-byte hdwr sectors (1003 MB) sda: Write Protect is off sda: assuming drive cache: write through sd 2:0:0:0: Attached scsi removable disk sda sd 2:0:0:0: Attached scsi generic sg0 type 0 AP SETKEYS DONE - WPA2, AuthMode(7)=WPA2PSK, WepStatus(6)=AES, GroupWepStatus(4)=TKIP end_request: I/O error, dev sda, sector 4277 tfat error (device sda1, pid 3354): exfat_bio_end_io_write(): Bio write I/O error (error 5). Buffer I/O error on device sda1, logical block 2479 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 2480 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 2481 lost page write due to I/O error on sda1 sd 2:0:0:0: rejecting I/O to offline device sd 2:0:0:0: rejecting I/O to offline device tfat error (device sda1, pid 3354): exfat_bdata_end_io_write(): FAT mirror bio write I/O error (error 5). end_request: I/O error, dev sda, sector 95 tfat error (device sda1, pid 3354): exfat_bio_end_io_write(): Bio write I/O error (error 5). tfat error (device sda1, pid 2541): exfat_write_cluster_chain(): Failed to sync modified FAT region to disk (error 5). tfat error (device sda1, pid 2541): exfat_write_inode(): Failed (error 5). Inode is corrupt. tfat warning (device sda1, pid 2541): exfat_fsync(): Failed to fsync inode 0x106e7 (error 5). sd 2:0:0:0: rejecting I/O to offline device Buffer I/O error on device sda1, logical block 2481 lost page write due to I/O error on sda1 sd 2:0:0:0: rejecting I/O to offline device sd 2:0:0:0: rejecting I/O to offline device printk: 39 messages suppressed. tfat error (device sda1, pid 4886): exfat_bio_end_io_write(): Bio write I/O error (error 5). sd 2:0:0:0: rejecting I/O to offline device sd 2:0:0:0: rejecting I/O to offline device printk: 11 messages suppressed. tfat error (device sda1, pid 4891): exfat_bio_end_io_write(): Bio write I/O error (error 5). sd 2:0:0:0: rejecting I/O to offline device sd 2:0:0:0: rejecting I/O to offline device printk: 54 messages suppressed. tfat error (device sda1, pid 53): exfat_bio_end_io_write(): Bio write I/O error (error 5). sd 2:0:0:0: rejecting I/O to offline device sd 2:0:0:0: rejecting I/O to offline device printk: 25 messages suppressed. tfat error (device sda1, pid 53): exfat_bio_end_io_write(): Bio write I/O error (error 5). sd 2:0:0:0: rejecting I/O to offline device sd 2:0:0:0: rejecting I/O to offline device BUG: at fs/squashfs/uncomp.c:135 sqlzma_un() Call Trace: [<80011c94>] dump_stack+0x8/0x34 [<800d64d0>] sqlzma_un+0x250/0x288 [<800cdc08>] squashfs_read_data+0x6a8/0x88c SQUASHFS error: sb_bread failed reading block 0xa1 SQUASHFS error: Unable to read page, block 22aac, size 5ab7 ... SQUASHFS error: sb_bread failed reading block 0xce SQUASHFS error: Unable to read page, block 2db06, size 5e57 AP SETKEYS DONE - WPA2, AuthMode(7)=WPA2PSK, WepStatus(6)=AES, GroupWepStatus(4)=TKIP AP SETKEYS DONE - WPA2, AuthMode(7)=WPA2PSK, WepStatus(6)=AES, GroupWepStatus(4)=TKIP AP SETKEYS DONE - WPA2, AuthMode(7)=WPA2PSK, WepStatus(6)=AES, GroupWepStatus(4)=TKIP U-Boot 1.1.3 (Sep 1 2012 - 08:34:08) Board: Ralink APSoC DRAM: 32 MB relocate_code Pointer at: 81fb4000 spi_wait_nsec: 42 spi device id: c2 20 17 c2 20 (2017c220) find flash: MX25L6405D raspi_read: from:30000 len:1000 .*** Warning - bad CRC, using default environment ============================================ Ralink UBoot Version: 3.6.0.0 -------------------------------------------- ASIC 5350_MP (Port5<->None) DRAM_CONF_FROM: Boot-Strapping DRAM_TYPE: SDRAM DRAM_SIZE: 256 Mbits DRAM_WIDTH: 16 bits DRAM_TOTAL_WIDTH: 16 bits TOTAL_MEMORY_SIZE: 32 MBytes Flash component: SPI Flash Date:Sep 1 2012 Time:08:34:08 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:128, ways:4, linesz:32 ,total:16384 ##### The CPU freq = 360 MHZ #### estimate memory size =32 Mbytes Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. 0 3: System Boot system code via Flash. ## Booting image at bc050000 ... raspi_read: from:50000 len:40 . Image Name: MIPS OpenWrt Linux-3.14.18 Created: 2014-10-03 0:31:52 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1049649 Bytes = 1 MB Load Address: 80000000 Entry Point: 80000000 raspi_read: from:50040 len:100431 ................. Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 32 Starting kernel ... [ 0.000000] Linux version 3.14.18 (recurry@debian) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42649) ) #1 Thu Oct 2 17:30:54 PDT 2014 [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) [ 0.000000] MIPS: machine is HOOTOO HT-TM02 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00055cf2 [ 0.000000] Readback ErrCtl register=00055cf2 [ 0.000000] Memory: 29216K/32768K available (2283K kernel code, 119K rwdata, 456K rodata, 140K init, 180K bss, 3552K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:256 [ 0.000000] CPU Clock: 360MHz [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.000000] genirq: Flags mismatch irq 7. 00014600 (timer) vs. 00014600 (systick) [ 0.010000] Calibrating delay loop... 479.23 BogoMIPS (lpj=2396160) [ 0.070000] pid_max: default: 32768 minimum: 301 [ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] pinctrl core: initialized pinctrl subsystem [ 0.090000] NET: Registered protocol family 16 [ 0.120000] bio: create slab <bio-0> at 0 [ 0.120000] rt2880_gpio 10000600.gpio: registering 22 gpios [ 0.130000] rt2880_gpio 10000600.gpio: registering 22 irq handlers [ 0.140000] Switched to clocksource systick [ 0.140000] NET: Registered protocol family 2 [ 0.160000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.180000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.200000] TCP: reno registered [ 0.210000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.210000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.230000] NET: Registered protocol family 1 [ 0.240000] rt-timer 10000100.timer: maximum frequency is 7324Hz [ 0.260000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.320000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.320000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.350000] msgmni has been set to 57 [ 0.350000] io scheduler noop registered [ 0.370000] io scheduler deadline registered (default) [ 0.370000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.400000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A [ 0.420000] console [ttyS0] enabled [ 0.420000] console [ttyS0] enabled [ 0.420000] bootconsole [early0] disabled [ 0.420000] bootconsole [early0] disabled [ 0.450000] m25p80 spi32766.0: mx25l6405d (8192 Kbytes) [ 0.470000] 4 ofpart partitions found on MTD device spi32766.0 [ 0.470000] Creating 4 MTD partitions on "spi32766.0": [ 0.490000] 0x000000000000-0x000000030000 : "u-boot" [ 0.500000] 0x000000030000-0x000000040000 : "u-boot-env" [ 0.520000] 0x000000040000-0x000000050000 : "factory" [ 0.520000] 0x000000050000-0x000000800000 : "firmware" [ 0.550000] 0x000000150471-0x000000800000 : "rootfs" [ 0.550000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.590000] mtd: device 4 (rootfs) set to be root filesystem [ 0.590000] mtd: partition "rootfs_data" created automatically, ofs=0x3a0000, len=0x460000 [ 0.620000] 0x0000003a0000-0x000000800000 : "rootfs_data" [ 0.640000] eth0: done loading [ 0.640000] rt3xxx-usbphy usbphy.3: loaded [ 0.660000] rt2880_wdt 10000120.watchdog: Initialized [ 0.660000] TCP: cubic registered [ 0.680000] NET: Registered protocol family 17 [ 0.680000] 8021q: 802.1Q VLAN Support v1.8 [ 0.720000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. [ 0.720000] Freeing unused kernel memory: 140K (802cd000 - 802f0000) procd: Console is alive procd: - watchdog - [ 7.100000] usbcore: registered new interface driver usbfs [ 7.120000] usbcore: registered new interface driver hub [ 7.120000] usbcore: registered new device driver usb [ 7.160000] SCSI subsystem initialized [ 7.180000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.190000] ehci-platform: EHCI generic platform driver [ 7.390000] rt3xxx-usbphy usbphy.3: remote usb device wakeup disabled [ 7.390000] rt3xxx-usbphy usbphy.3: UTMI 16bit 30MHz [ 7.390000] ehci-platform 101c0000.ehci: EHCI Host Controller [ 7.390000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 7.390000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 7.720000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 7.720000] hub 1-0:1.0: USB hub found [ 7.740000] hub 1-0:1.0: 1 port detected [ 7.750000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.770000] ohci-platform: OHCI generic platform driver [ 7.770000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller [ 7.790000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 [ 7.810000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 [ 7.870000] hub 2-0:1.0: USB hub found [ 7.890000] hub 2-0:1.0: 1 port detected [ 7.910000] usbcore: registered new interface driver usb-storage procd: - preinit - [ 9.320000] rt305x-esw 10110000.esw: link changed 0x00 [ 9.620000] random: mktemp urandom read with 93 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level kmod: ran 1 iterations [ 13.730000] random: nonblocking pool is initialized block: extroot: failed to load /etc/config/fstab: Entry not found jffs2 is not ready - marker found procd: - early - procd: - watchdog - procd: - ubus - procd: - init - Please press Enter to activate this console. [ 17.210000] NET: Registered protocol family 10 [ 17.250000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 17.290000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea [ 17.310000] Backport generated by backports.git backports-20140320-37-g5c33da0 [ 17.330000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.350000] nf_conntrack version 0.5.0 (458 buckets, 1832 max) [ 17.400000] usbcore: registered new interface driver ums-alauda [ 17.420000] usbcore: registered new interface driver ums-cypress [ 17.440000] usbcore: registered new interface driver ums-datafab [ 17.460000] usbcore: registered new interface driver ums-freecom [ 17.460000] usbcore: registered new interface driver ums-isd200 [ 17.490000] usbcore: registered new interface driver ums-jumpshot [ 17.510000] usbcore: registered new interface driver ums-karma [ 17.510000] usbcore: registered new interface driver ums-sddr09 [ 17.540000] usbcore: registered new interface driver ums-sddr55 [ 17.560000] usbcore: registered new interface driver ums-usbat [ 17.580000] usbcore: registered new interface driver usbserial [ 17.580000] usbcore: registered new interface driver usbserial_generic [ 17.610000] usbserial: USB Serial support registered for generic [ 17.650000] xt_time: kernel timezone is -0000 [ 17.710000] cfg80211: Calling CRDA to update world regulatory domain [ 17.740000] usbcore: registered new interface driver ftdi_sio [ 17.770000] cfg80211: World regulatory domain updated: [ 17.790000] cfg80211: DFS Master region: unset [ 17.790000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 17.810000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 17.830000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 17.850000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 17.850000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 17.880000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 17.880000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 17.880000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 17.880000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 17.880000] usbserial: USB Serial support registered for FTDI USB Serial Device [ 17.880000] PPP generic driver version 2.4.2 [ 17.880000] NET: Registered protocol family 24 [ 17.880000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected [ 17.880000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected [ 30.690000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 30.740000] jffs2_build_filesystem(): unlocking the mtd device... done. [ 30.750000] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 33.300000] device eth0.1 entered promiscuous mode [ 33.320000] device eth0 entered promiscuous mode [ 33.380000] br-lan: port 1(eth0.1) entered forwarding state [ 33.380000] br-lan: port 1(eth0.1) entered forwarding state [ 35.380000] br-lan: port 1(eth0.1) entered forwarding state [ 83.410000] done. [ 83.410000] jffs2: notice: (943) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. procd: - init complete - BusyBox v1.22.1 (2014-10-02 17:15:55 PDT) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- CHAOS CALMER (Bleeding Edge, r42649) ----------------------------------------------------- * 1 1/2 oz Gin Shake with a glassful * 1/4 oz Triple Sec of broken ice and pour * 3/4 oz Lime Juice unstrained into a goblet. * 1 1/2 oz Orange Juice * 1 tsp. Grenadine Syrup -----------------------------------------------------


root@hootoo:/# cat /etc/hotplug.d/button/buttons
#!/bin/sh
logger the button was $BUTTON and the action was $ACTION

root@hootoo:/# logread -f
Sun Feb 21 12:17:32 2016 user.notice root: the button was BTN_0 and the action was pressed
Sun Feb 21 12:17:35 2016 user.notice root: the button was BTN_0 and the action was released

Moving switch to the world icon is “pressed”.

It is possible to use the available usb port to add extra peripherals to the box (however it is rather bulky).

Here is an example of how to add an ssd1306 oled display connected through ch341 i2c adapter.

https://github.com/mkschreder/hack-ssd1306-openwrt


1)
openwrt-ramips-rt305x-ht-tm02-squashfs-factory-r42649.bin
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1