Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Globalscale SmilePlug ====== Target: ''mvebu'' The WNIC is the Marvell Avastar 88W8764 ===== Hardware ===== ==== Info ==== ^ [[wp>Instruction set]] | [[wp>ARM architecture|ARMv7]] | ^ Vendor | [[wp>Marvell Technology Group|Marvell]] | ^ [[docs:techref:bootloader]] | [[docs:techref:bootloader:uboot|U-Boot]] | ^ [[docs:techref:hardware:soc|System-On-Chip]] | Marvell ARMADA 370 | ^ [[docs:techref:hardware:cpu|CPU]] @Frq | Marvell ARMv7-compatible (P4J) @800MHz | ^ Flash size | 1 GiB NAND | ^ Flash Chip | Micron 29F8G08ABABA | ^ RAM size | 512 MiB | ^ RAM Chip | Elpida J2108BCSE-DJ-F | ^ Wireless No1 | Marvell Avastar 88W8764 **4x4** 802.11 b/g/n Linux driver: ''mwl8k'' | ^ Wireless No2 | none | ^ [[docs:techref:hardware:switch]] | Power (S1) | ^ Modem | none | ^ USB | Yes 2 x 3.0 | ^ [[docs:techref:hardware:port.serial|Serial]] | [[#Serial|Yes]] | ^ [[docs:techref:hardware:port.jtag|JTAG]] | [[#JTAG|Yes]] | ==== Serial ==== -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. How to connect to the Serial Port of this specific device:\\ **Insert photo of PCB with markings for serial port** <WRAP BOX> FIXME //Replace EXAMPLE by real values.// </WRAP> ^ Serial connection parameters\\ for Globalscale SmilePlug | EXAMPLE 115200, 8N1 | ==== JTAG ==== -> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc. How to connect to the JTAG Port of this specific device:\\ **Insert photo of PCB with markings for JTAG port** ===== Tags ===== [[meta:tags|How to add tags]] {{tag>mvebu armada370 1024flash 512ram GigabitEthernet 2NIC 1WNIC}} mvebu armada370 1024flash 512ram gigabitethernet 2nic 1wnic Last modified: 2020/12/19 10:34by danitool