User Tools

Site Tools


toh:gl.inet:gl.inet_gl-b1300

GL.iNet GL-B1300

The GL.iNet GL-B1300 is a compact Gigabit Wireless Router featuring a quad-core ARM CPU, 32MB Flash storage, 256MB RAM, one GigabitEthernet WAN port, two GigabitEthernet LAN ports, dual-band wireless, one USB3.0 port and a relatively easily accessible pre-populated serial header.

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

FIXME

Getting started with a new Device Page

  1. This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
  2. There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
  3. When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it.

Keep the articles modular

  • Please include only model specific information, omit bla,bla and put everything generic into separate articles
  • If you have no time to write certain stuff, link to docs
  • base-system should lead the way, do not explain this again
  • DO NOT provide a complete howto here! Instead groom the general documentation.

Supported Versions

Hardware Highlights

ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
GL-B1300Qualcomm Atheros IPQ402871732256Qualcomm Atheros IPQ4028b/g/na/n/ac-3-1x 3.0, 1x Header

Installation

Flash Layout

FIXME Find out flash layout, then add the flash layout table here (copy, paste, modify the example).

Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout.

/proc/mtd content (OpenWRT)

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00040000 00010000 "SBL1"
mtd1: 00020000 00010000 "MIBIB"
mtd2: 00060000 00010000 "QSEE"
mtd3: 00010000 00010000 "CDT"
mtd4: 00010000 00010000 "DDRPARAMS"
mtd5: 00010000 00010000 "APPSBLENV"
mtd6: 00080000 00010000 "APPSBL"
mtd7: 00010000 00010000 "ART"
mtd8: 01e80000 00010000 "firmware"
mtd9: 002d0000 00010000 "kernel"
mtd10: 01bba2d0 00010000 "rootfs"
mtd11: 018f0000 00010000 "rootfs_data"

Relevant dmesg output (OpenWRT)

# dmesg | grep MTD -A 15
[    0.576325] 9 fixed-partitions partitions found on MTD device spi0.0
[    0.581203] Creating 9 MTD partitions on "spi0.0":
[    0.587625] 0x000000000000-0x000000040000 : "SBL1"
[    0.592878] 0x000000040000-0x000000060000 : "MIBIB"
[    0.597553] 0x000000060000-0x0000000c0000 : "QSEE"
[    0.602378] 0x0000000c0000-0x0000000d0000 : "CDT"
[    0.607149] 0x0000000d0000-0x0000000e0000 : "DDRPARAMS"
[    0.611969] 0x0000000e0000-0x0000000f0000 : "APPSBLENV"
[    0.616982] 0x0000000f0000-0x000000170000 : "APPSBL"
[    0.622205] 0x000000170000-0x000000180000 : "ART"
[    0.627374] 0x000000180000-0x000002000000 : "firmware"
[    0.632317] 2 fit-fw partitions found on MTD device firmware
[    0.636480] Creating 2 MTD partitions on "firmware":
[    0.642330] 0x000000000000-0x0000002d0000 : "kernel"
[    0.647899] 0x0000002c5d30-0x000001e80000 : "rootfs"
[    0.652738] mtd: device 10 (rootfs) set to be root filesystem
[    0.657323] 1 squashfs-split partitions found on MTD device rootfs
[    0.662813] 0x000000590000-0x000001e80000 : "rootfs_data"

Default uboot configuration

fw_printenv output:

# fw_printenv
baudrate=115200
bootcmd=bootipq
bootdelay=1
bootstopkey=gl
ipaddr=192.168.1.1
serverip=192.168.1.2

Uboot-web Installation

Note: uboot on this device looks for filename “lede-gl-b1300.bin” – For both generic tftp flashing and uboot-web.

  • Connect router's WAN port to computer
  • Set the computer with static address of 192.168.1.2
  • Push down reset button and power on – Hold until power & lan leds are on constant.
  • Uboot-Web can be accessed at http://192.168.1.1 – Use this to pass in “lede-gl-b1300.bin”
  • The wifi led will be flashing when writing image.
  • The device will reboot once complete.

Note: After flashing a new firmware, ensure that no device uses the IP address 192.168.1.2 anymore. You can see uBoot trying to ping 192.168.1.2 to determine if the host is alive in the bootlog at the end of this page. If it detects that 192.168.1.2 is alive, it will try to tftp-load a firmware from it and will NOT boot to OpenWRT.

OEM installation using the TFTP method

generic.flashing.tftp

Note: After flashing a new firmware, ensure that no device uses the IP address 192.168.1.2 anymore. You can see uBoot trying to ping 192.168.1.2 to determine if the host is alive in the bootlog at the end of this page. If it detects that 192.168.1.2 is alive, it will try to tftp-load a firmware from it and will NOT boot to OpenWRT.

Specific values needed for tftp

Bootloader tftp server IPv4 address 192.168.1.2
Firmware tftp image Latest OpenWrt release (NOTE: Name must contain “tftp”)
TFTP transfer window FILL-IN seconds
TFTP window start approximately FILL-IN seconds after power on
TFTP client required IP address 192.168.1.1

Upgrading OpenWrt

generic.sysupgrade

FIXME These are generic instructions. Update with your router's specifics.

LuCI Web Upgrade Process

  • Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
  • Upload image file for sysupgrade to LuCI
  • Wait for reboot

Terminal Upgrade Process

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:

  • sysupgrade
  • mtd

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

mtd

If sysupgrade does not support this router, use mtd.

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc linux && reboot

Debricking

Failsafe mode

Basic configuration

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Specific Configuration

Network interfaces

The default network configuration is:

Interface Name Description Default configuration
br-lan LAN & WiFi 192.168.1.1/24
eth0 LAN ports (1 & 2) None
eth1 WAN port DHCP
wlan0 WiFi Disabled

Switch Ports (for VLANs)

Port 0 is the internal connection to the router itself.

Port Switch port
Internet (WAN) 5
LAN 1 (middle) 4
LAN 2 (left) 3
CPU (Internal) 0

Buttons

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

The GL.iNet GL-B1300 has the following buttons:

BUTTON Event
Reset reset
WPS wps

Hardware

Info

General
Brand GL.iNet
Model GL-B1300
Versions
Device Type WiFi Router
Availability Available 2019
Comments - general
OpenWrt Support
Supported Since Commit https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=04d3308b6248ef21a6f0bc3378b342906c2d2865
Supported Since Release 18.06.0
Supported Current Release 19.07.3
Unsupported
Hardware
Bootloader U-Boot
Target ipq40xx
System-On-Chip
CPU MHz 717
Flash MB 32
RAM MB 256
Network
Ethernet 100M ports -
Ethernet Gbit ports 3
Switch Qualcomm Atheros QCA8075
Modem -
VLAN Yes
Comments - network ports
Wireless
WLAN 2.4GHz b/g/n
WLAN 5.0GHz a/n/ac
WLAN Hardware Qualcomm Atheros IPQ4028
Detachable Antennas 4
Comments - WLAN Detachable antennas are inside the case
Interfaces
USB ports 1x 3.0, 1x Header
SATA ports -
Serial Yes
JTAG ¿
Comments - USB & SATA ports
Misc
LED count 3
Button count 2
Power supply 12 VDC, 1.5 A
Links
Forum Topic URL
WikiDevi URL https://wikidevi.wi-cat.ru/GL.iNet_GL-B1300
OEM device homepage URL https://www.gl-inet.com/b1300/
Firmware OEM Stock URL https://docs.gl-inet.com/en/3/release_notes/gl-b1300/
Firmware OpenWrt Install URL
Firmware OpenWrt Upgrade URL http://downloads.openwrt.org/releases/19.07.3/targets/ipq40xx/generic/openwrt-19.07.3-ipq40xx-generic-glinet_gl-b1300-squashfs-sysupgrade.bin
Edit the underlying data View/Edit data

Photos

Front:
GL-B1300 - Front picture

Rear:
GL-B1300 - Rear picture

Backside label:
GL-B1300 - Back picture

Opening the case

Note: This will void your warranty!

  • Remove the 4 rubber pads under the device;
  • Unscrew the 4 screws that were hidden behind the rubber feets;
  • Use a plastic prying tool to gently remove the cover as shown on the picture below. There are 8 plastic clips maintaining the cover in place, two on each side of the cover;

GL-B1300 - Cover removal - side view

GL-B1300 - Cover removal - internal view

Main PCB:
GL-B1300 - PCB GL-B1300 - PCB

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
GL-B1300 - Serial Header

GL-B1300 - Hook Clips

  • When holding the device with the serial headers on the left-hand side, the pins are from top to bottom (as visible on the PCB markings): Ground, Rx, Tx, 3.3V (not populated)
  • N.B.: the markings on the hook clips shown on the picture with the serial cable connected reverse Rx & Tx because they're labelled from the USB TTL adapter point of view.
Serial connection parameters
for
GL.iNet GL-B1300 V1.31 115200, 8N1, 3.3V TTL

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootloader mods

Hardware mods

None so far.

Bootlogs

OEM bootlog

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE


OpenWRT bootlog

CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00117 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000000 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1338 - bootable_media_detect_entry, Start B - 1678 - bootable_media_detect_success, Start B - 1692 - elf_loader_entry, Start B - 5068 - auth_hash_seg_entry, Start B - 7209 - auth_hash_seg_exit, Start B - 578928 - elf_segs_hash_verify_entry, Start B - 696420 - PBL, End B - 696444 - SBL1, Start B - 787185 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 788709 - boot_flash_init, Start D - 54302 - boot_flash_init, Delta B - 847154 - boot_config_data_table_init, Start D - 3839 - boot_config_data_table_init, Delta - (419 Bytes) B - 854363 - clock_init, Start D - 7586 - clock_init, Delta B - 866447 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0 B - 869860 - sbl1_ddr_set_params, Start B - 874957 - cpr_init, Start D - 2 - cpr_init, Delta B - 879339 - Pre_DDR_clock_init, Start D - 5 - Pre_DDR_clock_init, Delta D - 13175 - sbl1_ddr_set_params, Delta B - 893075 - pm_driver_init, Start D - 2 - pm_driver_init, Delta B - 963259 - sbl1_wait_for_ddr_training, Start D - 27 - sbl1_wait_for_ddr_training, Delta B - 978804 - Image Load, Start D - 140750 - QSEE Image Loaded, Delta - (274048 Bytes) B - 1119983 - Image Load, Start D - 1439 - SEC Image Loaded, Delta - (2048 Bytes) B - 1130402 - Image Load, Start D - 213294 - APPSBL Image Loaded, Delta - (436535 Bytes) B - 1344094 - QSEE Execution, Start D - 60 - QSEE Execution, Delta B - 1350339 - SBL1, End D - 655972 - SBL1, Delta S - Flash Throughput, 2006 KB/s (713050 Bytes, 355296 us) S - DDR Frequency, 537 MHz U-Boot 2012.07 [Chaos Calmer 15.05.1,r35193] (Apr 13 2018 - 13:54:46) smem ram ptable found: ver: 1 len: 3 DRAM: 256 MiB machid : 0x8010000 NAND: SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x2000000 32 MiB MMC: In: serial Out: serial Err: serial machid: 8010000 flash_type: 0 Net: MAC0 addr:e4:95:6e:xx:xx:xx PHY ID1: 0x4d PHY ID2: 0xd0b1 ipq40xx_ess_sw_init done eth0 Hit "gl" key to stop booting: 0 SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB Checking calibration status... Device have calibrated,checking test status... Device haven tested, checking MAC info... Device have MAC info, starting firmware... eth0 PHY0 Down Speed :10 Half duplex eth0 PHY1 Down Speed :10 Half duplex eth0 PHY2 Down Speed :10 Half duplex eth0 PHY3 Down Speed :10 Half duplex eth0 PHY4 Down Speed :10 Half duplex ping failed; host 192.168.1.2 is not alive eth0 PHY0 Down Speed :10 Half duplex eth0 PHY1 Down Speed :10 Half duplex eth0 PHY2 Down Speed :10 Half duplex eth0 PHY3 Down Speed :10 Half duplex eth0 PHY4 Down Speed :10 Half duplex ping failed; host 192.168.1.2 is not alive eth0 PHY0 Down Speed :10 Half duplex eth0 PHY1 Down Speed :10 Half duplex eth0 PHY2 up Speed :1000 Full duplex eth0 PHY3 Down Speed :10 Half duplex eth0 PHY4 up Speed :1000 Full duplex Using eth0 device ping failed; host 192.168.1.2 is not alive SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB ## Booting kernel from FIT Image at 84000000 ... Using 'config@1' configuration Trying 'kernel@1' kernel subimage Description: ARM OpenWrt Linux-4.14.171 Type: Kernel Image Compression: gzip compressed Data Start: 0x840000e4 Data Size: 2889600 Bytes = 2.8 MiB Architecture: ARM OS: Linux Load Address: 0x80208000 Entry Point: 0x80208000 Hash algo: crc32 Hash value: f4cbe47f Hash algo: sha1 Hash value: 1c0a50ac078ef7fc35846df574c94cec0ea4ba0b Verifying Hash Integrity ... crc32+ sha1+ OK ## Flattened Device Tree from FIT Image at 84000000 Using 'config@1' configuration Trying 'fdt@1' FDT blob subimage Description: ARM OpenWrt glinet_gl-b1300 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x842c19a0 Data Size: 15967 Bytes = 15.6 KiB Architecture: ARM Hash algo: crc32 Hash value: d12da5ca Hash algo: sha1 Hash value: a5f89b40e7ffbda6cbd75030354664b5fb6a175d Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x842c19a0 Uncompressing Kernel Image ... OK Loading Device Tree to 86ff9000, end 86fffe5e ... OK ipq: fdt fixup unable to find compatible node Using machid 0x8010000 from environment Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.171 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10947-65030d81f3)) #0 SMP Thu Feb 27 21:05:12 2020 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: GL.iNet GL-B1300 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] random: get_random_bytes called from 0xc09008d0 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s29388 r8192 d23860 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64512 [ 0.000000] Kernel command line: rootfsname=rootfs rootwait [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 249936K/260096K available (4453K kernel code, 146K rwdata, 692K rodata, 1024K init, 236K bss, 10160K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc07594f8 (5446 kB) [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB) [ 0.000000] .data : 0xc0a00000 - 0xc0a24b80 ( 147 kB) [ 0.000000] .bss : 0xc0a26000 - 0xc0a61018 ( 237 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns [ 0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns [ 0.000022] Switching to timer-based delay loop, resolution 20ns [ 0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000) [ 0.000261] pid_max: default: 32768 minimum: 301 [ 0.000400] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000417] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001031] CPU: Testing write buffer coherency: ok [ 0.001727] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.001872] Hierarchical SRCU implementation. [ 0.002532] smp: Bringing up secondary CPUs ... [ 0.005305] smp: Brought up 1 node, 4 CPUs [ 0.005323] SMP: Total of 4 processors activated (384.00 BogoMIPS). [ 0.005331] CPU: All CPU(s) started in SVC mode. [ 0.009161] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.009329] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.009352] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.009549] pinctrl core: initialized pinctrl subsystem [ 0.010500] NET: Registered protocol family 16 [ 0.010795] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.011810] cpuidle: using governor ladder [ 0.011855] cpuidle: using governor menu [ 0.028834] usbcore: registered new interface driver usbfs [ 0.028899] usbcore: registered new interface driver hub [ 0.028977] usbcore: registered new device driver usb [ 0.029023] pps_core: LinuxPPS API ver. 1 registered [ 0.029034] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.029058] PTP clock support registered [ 0.030265] clocksource: Switched to clocksource arch_sys_counter [ 0.031112] NET: Registered protocol family 2 [ 0.031806] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.031846] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.031895] TCP: Hash tables configured (established 2048 bind 2048) [ 0.032003] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.032039] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.032227] NET: Registered protocol family 1 [ 0.033221] No memory allocated for crashlog [ 0.033405] workingset: timestamp_bits=30 max_order=16 bucket_order=0 [ 0.036740] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.036756] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.041862] io scheduler noop registered [ 0.041882] io scheduler deadline registered (default) [ 0.044485] bam-dma-engine 8e04000.dma: num-channels unspecified in dt [ 0.044503] bam-dma-engine 8e04000.dma: num-ees unspecified in dt [ 0.045179] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000 [ 0.045260] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7 [ 0.045330] tcsr 1953000.ess_tcsr: setting ess interface select = 0 [ 0.045402] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222 [ 0.045617] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.047381] msm_serial 78af000.serial: msm_serial: detected port #0 [ 0.047430] msm_serial 78af000.serial: uartclk = 1843200 [ 0.047485] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM [ 0.047513] msm_serial: console setup on port #0 [ 0.553706] console [ttyMSM0] enabled [ 0.558601] msm_serial: driver initialized [ 0.566034] loop: module loaded [ 0.567149] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 0.570182] m25p80 spi0.0: mx25l25635e (32768 Kbytes) [ 0.576324] 9 fixed-partitions partitions found on MTD device spi0.0 [ 0.581201] Creating 9 MTD partitions on "spi0.0": [ 0.587624] 0x000000000000-0x000000040000 : "SBL1" [ 0.592880] 0x000000040000-0x000000060000 : "MIBIB" [ 0.597557] 0x000000060000-0x0000000c0000 : "QSEE" [ 0.602371] 0x0000000c0000-0x0000000d0000 : "CDT" [ 0.607149] 0x0000000d0000-0x0000000e0000 : "DDRPARAMS" [ 0.611969] 0x0000000e0000-0x0000000f0000 : "APPSBLENV" [ 0.616973] 0x0000000f0000-0x000000170000 : "APPSBL" [ 0.622206] 0x000000170000-0x000000180000 : "ART" [ 0.627381] 0x000000180000-0x000002000000 : "firmware" [ 0.632307] 2 fit-fw partitions found on MTD device firmware [ 0.636480] Creating 2 MTD partitions on "firmware": [ 0.642328] 0x000000000000-0x0000002d0000 : "kernel" [ 0.647903] 0x0000002c5d30-0x000001e80000 : "rootfs" [ 0.652734] mtd: device 10 (rootfs) set to be root filesystem [ 0.657312] 1 squashfs-split partitions found on MTD device rootfs [ 0.662811] 0x000000590000-0x000001e80000 : "rootfs_data" [ 0.670054] libphy: ipq40xx_mdio: probed [ 0.705117] ESS reset ok! [ 0.738107] ESS reset ok! [ 1.170655] libphy: Fixed MDIO Bus: probed [ 1.270397] i2c /dev entries driver [ 1.301208] NET: Registered protocol family 10 [ 1.303103] Segment Routing with IPv6 [ 1.304650] NET: Registered protocol family 17 [ 1.308340] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.313058] 8021q: 802.1Q VLAN Support v1.8 ý[ 1.341080] VFS: Mounted root (squashfs filesystem) readonly on device 31:10. [ 1.342659] Freeing unused kernel memory: 1024K [ 1.447355] random: fast init done [ 2.547175] init: Console is alive [ 2.547411] init: - watchdog - [ 4.739391] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 5.065035] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.065117] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 5.069715] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010 [ 5.077111] xhci-hcd xhci-hcd.0.auto: irq 94, io mem 0x08a00000 [ 5.087189] hub 1-0:1.0: USB hub found [ 5.092360] hub 1-0:1.0: 1 port detected [ 5.096393] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.100169] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 5.105500] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 5.113182] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.120366] hub 2-0:1.0: USB hub found [ 5.128010] hub 2-0:1.0: 1 port detected [ 5.131909] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 5.135596] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 5.141122] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010 [ 5.148484] xhci-hcd xhci-hcd.1.auto: irq 95, io mem 0x06000000 [ 5.158405] hub 3-0:1.0: USB hub found [ 5.163755] hub 3-0:1.0: 1 port detected [ 5.167813] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 5.171634] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 5.176903] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 5.184562] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.191548] hub 4-0:1.0: USB hub found [ 5.199417] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 5.204734] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.220676] init: - preinit - [ 5.765378] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.765460] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.783525] random: procd: uninitialized urandom read (4 bytes read) Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 9.253659] jffs2: notice: (145) jffs2_build_xattr_subsystem: complete building xattr subsystem, 8 of xdatum (3 unchecked, 5 orphan) and 74 of xref (5 dead, 1 orphan) found. [ 9.270803] mount_root: switching to jffs2 overlay [ 9.291321] overlayfs: upper fs does not support tmpfile. [ 9.424806] urandom-seed: Seeding with /etc/urandom.seed [ 9.651412] random: crng init done [ 9.898837] procd: - early - [ 9.898974] procd: - watchdog - [ 10.591671] procd: - watchdog - [ 10.594602] procd: - ubus - [ 10.754636] procd: - init - Please press Enter to activate this console. [ 11.439165] urngd: v1.0.2 started. [ 11.496122] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.508907] tun: Universal TUN/TAP device driver, 1.6 [ 11.557637] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.565059] Loading modules backported from Linux version v4.19.98-0-gd183c8e2647a [ 11.565094] Backport generated by backports.git v4.19.98-1-0-g8204eb99 [ 11.574126] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.583398] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 11.654794] wireguard: WireGuard 0.0.20190702 loaded. See www.wireguard.com for information. [ 11.654837] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 11.678811] xt_time: kernel timezone is -0000 [ 11.706749] PPP generic driver version 2.4.2 [ 11.708256] NET: Registered protocol family 24 [ 11.910911] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a000000.wifi.txt failed with error -2 [ 11.910956] ath10k_ahb a000000.wifi: Falling back to user helper [ 12.051961] firmware ath10k!fwcfg-ahb-a000000.wifi.txt: firmware_loading_store: map pages failed [ 12.057984] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2 [ 12.059832] ath10k_ahb a000000.wifi: Falling back to user helper [ 12.162478] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed [ 12.162860] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2 [ 12.170725] ath10k_ahb a000000.wifi: Falling back to user helper [ 12.262338] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed [ 12.262721] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2 [ 12.270601] ath10k_ahb a000000.wifi: Falling back to user helper [ 12.331848] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed [ 12.927133] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003900ff sub 0000:0000 [ 12.927182] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 12.938784] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,tx rate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 8f2e0e09 [ 13.031691] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 e2dfaa91 [ 14.341621] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 14.341666] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32 [ 14.379062] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 14.379442] ath10k_ahb a000000.wifi: wmi print 'free: 56528 iram: 23400 sram: 32520' [ 14.480697] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1 [ 14.772535] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a800000.wifi.txt failed with error -2 [ 14.772589] ath10k_ahb a800000.wifi: Falling back to user helper [ 15.125643] firmware ath10k!fwcfg-ahb-a800000.wifi.txt: firmware_loading_store: map pages failed [ 15.132758] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2 [ 15.133517] ath10k_ahb a800000.wifi: Falling back to user helper [ 15.203162] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed [ 15.203456] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2 [ 15.211456] ath10k_ahb a800000.wifi: Falling back to user helper [ 15.276611] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed [ 15.276974] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2 [ 15.284960] ath10k_ahb a800000.wifi: Falling back to user helper [ 15.351783] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed [ 15.352045] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003900ff sub 0000:0000 [ 15.359671] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 15.372482] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,tx rate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 8f2e0e09 [ 15.428552] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 e2dfaa91 [ 16.738784] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 16.738836] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32 [ 16.774760] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 16.775442] ath10k_ahb a800000.wifi: wmi print 'free: 56528 iram: 23400 sram: 32520' [ 16.876148] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1 [ 17.000897] kmodloader: done loading kernel modules from /etc/modules.d/* [ 21.308148] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.308222] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.365613] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 21.366952] ess_edma c080000.edma: eth1: GMAC Link is up with phy_speed=1000 [ 21.371539] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 22.147004] pppoe-wan: renamed from ppp0 [ 27.810472] device pppoe-wan entered promiscuous mode BusyBox v1.30.1 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 19.07.2, r10947-65030d81f3 -----------------------------------------------------


Notes

Space for additional notes, links to forum threads or other resources.

Tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/gl.inet/gl.inet_gl-b1300.txt · Last modified: 2020/05/21 21:49 by tmomas