Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:gl.inet:gl-x300b [2021/12/23 04:34] – Created from the form at meta:create_new_device_page alzhaotoh:gl.inet:gl-x300b [2023/07/29 15:34] – [Soft Factory Reset] `reboot now` is deprecated/undocumented, see: reboot -h vgaetera
Line 7: Line 7:
 {{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} {{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}
  
-//Write short, relevant description of the deviceInclude a technical overviewbut avoid marketing buzzwords/useless stuffTwo to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//+//Collie (GL-X300B) is 4G LTE gateway designed for industrial useIt has an aluminum alloy exteriorsupports RS485 interface, and includes external antennas for an extended connectivity rangeCollie is designed for industrial deployment under harsh and hazardous environments or remote locations with minimal network infrastructure.//
  
 <WRAP BOX> <WRAP BOX>
-FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) **remove the instructionsas well as the ''<nowiki><WRAP></nowiki>'' that encloses it.**+GL-X300B has two models: GLX300B-RS485 comes with a RS485 interface and two antennasand GL-X300B-IoT comes with an IoT module and three antennas.
 </WRAP> </WRAP>
  
Line 17: Line 17:
 /*****/ /*****/
  
-{{media:example:genericrouter1.png?200|Generic Router}}+{{media:gl.inet:gl-x300b-rs485.png?400|GL-XE300-RS485}} 
 +{{media:gl.inet:gl-x300b-iot.jpg?400|GL-XE300-IoT}}
  
 <WRAP BOX> <WRAP BOX>
-FIXME +===== Facilitating Secure IoT Communications ===== 
-===== Getting started with a new Device Page ===== +  - Collie provices reliable network for heavy-duty IoT devices in an industrial environmentsuch as mass deployment of logistical drones, chemical equipment in laboratories, high-temperature manufacturing equipments, etc
-  - This is an empty template that suggests the information that should be present on well-constructed Device Page. This meansthat **you have to fill it with life and information.** +  - Collie has built-in hardware watchdog, detecting and recovering from connection errorsenhancing network reliability.\ 
-  - There are several "fixme" tags with text on light background (like this text) throughout this template. As you fill in the pageremove those tags so that people can judge its completeness+  - Apart from its powerful built-in firewallCollie is also pre-installed with OpenVPN and WireGuardsupporting 30+ VPN servicesBy enabling VPN, Collie automatically encrypts data traffic for all devices within the network, protecting sensitive personal information and client data. 
-  - When there are no more "fixme" tags leftdelete this one tooalong with the ''<nowiki><WRAP></nowiki>'' that encloses it. +  - All of GL.iNet’s OpenWrt devices can be easily customizable using our user-friendly ImageBuilder. Users can easily optimise the OpenWrt firmware for specific useor develop unique applications. 
- +  - For more details, please visit [[https://www.gl-inet.com/products/gl-x300b/]]
-===== Keep the articles modular ===== +
-  * Please include only model specific information, omit bla,bla and put everything generic into separate articles +
-  * If you have no time to write certain stuff, link to [[docs:start]] +
-  * [[docs:guide-user:base-system:start]] should lead the waydo not explain this again +
-  * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]].+
 </WRAP> </WRAP>
  
 ===== Supported Versions ===== ===== Supported Versions =====
- 
-<WRAP BOX> 
-FIXME 
-  - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If the tables below show information for ''<nowiki>GL.iNet GL-X300B </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables below contain "Nothing found", it means that either 
-    - the dataentry page for GL.iNet GL-X300B  is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-    - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter  : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
- 
 ---- datatable ---- ---- datatable ----
 cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Search_search-forums, Device Techdata_pageid cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Search_search-forums, Device Techdata_pageid
Line 51: Line 36:
 filter  : Brand=GL.iNet filter  : Brand=GL.iNet
 filter  : Model=GL-X300B filter  : Model=GL-X300B
-filter  : Versions~+filter  : Versions=v1
 ---- ----
  
-/* If no unsupported functions known, comment out the following datatable or delete it. */ 
----- datatable ---- 
-cols    : Unsupported Functions_unsupporteds 
-filter  : Brand=GL.iNet 
-filter  : Model=GL-X300B 
-filter  : Versions~ 
----- 
- 
-===== Experimental Versions ===== 
- 
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  
-   The official Table of Hardware only lists current, stable versions of OpenWrt.  * 
-   Use this space to describe any on-going efforts to create a newer version       * 
-   of the firmware for this device. Provide links to firmware images,              * 
-   active threads on the forum, or other sources of information.                   * 
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ 
- 
-//None at this time.// 
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
Line 80: Line 47:
 filter  : Brand=GL.iNet filter  : Brand=GL.iNet
 filter  : Model=GL-X300B filter  : Model=GL-X300B
-filter  : Versions~+filter  : Versions=v1
 ---- ----
  
  
 ===== Installation ===== ===== Installation =====
-/* stable release */ 
-/* uncomment once stable release is available 
 ---- datatable ---- ---- datatable ----
 cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
Line 93: Line 58:
 filter  : Brand=GL.iNet filter  : Brand=GL.iNet
 filter  : Model=GL-X300B filter  : Model=GL-X300B
-filter  : Versions~+filter  : Versions=v1
 ---- ----
-*/ 
- 
- 
-/* snapshot */ 
-/* delete once stable release is available */ 
----- datatable ---- 
-cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt snapshot Install URL_url, Firmware OpenWrt snapshot Upgrade URL_url, Firmware OEM Stock URL_url 
-headers : Model, Version, Current Release, Firmware OpenWrt snapshot Install, Firmware OpenWrt snapshot Upgrade, Firmware OEM Stock 
-align   : c,c,c 
-filter  : Brand=GL.iNet 
-filter  : Model=GL-X300B 
-filter  : Versions~ 
----- 
- 
  
 -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
Line 115: Line 66:
  
 ==== Flash Layout ==== ==== Flash Layout ====
-<WRAP BOX> 
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).// 
  
 Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout.
-</WRAP> 
  
-==== OEM easy installation ====+Output 'cat /proc/mtd' 
 +<code> 
 +dev:    size   erasesize  name 
 +mtd0: 00040000 00010000 "u-boot" 
 +mtd1: 00010000 00010000 "u-boot-env" 
 +mtd2: 00010000 00010000 "art" 
 +mtd3: 00fa0000 00010000 "firmware" 
 +mtd4: 001d0000 00010000 "kernel" 
 +mtd5: 00dd0000 00010000 "rootfs" 
 +mtd6: 00430000 00010000 "rootfs_data" 
 +</code>
  
-<WRAP BOX> 
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ 
-**//Remove / modify them if they do not apply to this particular device!//** 
  
-This section deals with +==== GL.iNet Web Upgrade Process ====
-  * How you install OpenWrt from a device freshly opened +
-  * The steps required such as reset to factory defaults if the device has already been configured +
- +
-**Note:** Reset router to factory defaults if it has been previously configured. +
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' +
-  * Upload .bin file to router +
-  * Wait for it to reboot +
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. +
-</WRAP> +
- +
-==== OEM installation using the TFTP method ==== +
- +
-->  [[docs:guide-user:installation:generic.flashing.tftp]] +
- +
-=== Specific values needed for tftp === +
- +
-<WRAP BOX> +
- +
-FIXME Enter values for "FILL-IN" below +
- +
-^ Bootloader tftp server IPv4 address  | FILL-IN   | +
-^ Bootloader MAC address (special)     | FILL-IN   | +
-^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | +
-^ TFTP transfer window                 | FILL-IN seconds                                | +
-^ TFTP window start                    | approximately FILL-IN seconds after power on   | +
-^ TFTP client required IP address      | FILL-IN                                        | +
- +
-</WRAP> +
- +
-===== Upgrading OpenWrt ===== +
-->  [[docs:guide-user:installation:generic.sysupgrade]] +
- +
-<WRAP BOX> +
- +
-FIXME These are generic instructions. Update with your router's specifics.+
  
 +  * Browse to ''<nowiki>http://192.168.8.1/#/upgrade</nowiki>'' GL.iNet Web Upgrade URL
 +  * Upload image file for sysupgrade
 +  * Choose whether to keep the configuration according to your needs, the default is to keep the configuration
 +  * Click install
 +  * Wait for reboot
 ==== LuCI Web Upgrade Process ==== ==== LuCI Web Upgrade Process ====
  
-  * Browse to ''<nowiki>http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/</nowiki>'' LuCI Upgrade URL+  * Browse to ''<nowiki>http://192.168.8.1/cgi-bin/luci/admin/system/flash</nowiki>'' LuCI Upgrade URL
   * Upload image file for sysupgrade to LuCI   * Upload image file for sysupgrade to LuCI
   * Wait for reboot   * Wait for reboot
  
 ==== Terminal Upgrade Process ==== ==== Terminal Upgrade Process ====
- 
 If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line.
-There are two command line methods for upgrading: 
- 
-  * ''sysupgrade'' 
-  * ''mtd'' 
  
 Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
  
-=== sysupgrade === +  * Login as root via SSH on 192.168.8.1, then enter the following commands:
- +
-  * Login as root via SSH on 192.168.1.1, then enter the following commands:+
  
 <code> <code>
 cd /tmp cd /tmp
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc +wget http://download.gl-inet.com/firmware/x300b/release/openwrt-x300b-3.203-0701.bin 
-sysupgrade /tmp/xxx.abc+sysupgrade /tmp/openwrt-x300b-3.203-0701.bin
 </code> </code>
  
-=== mtd ===+==== Upgrade via uboot ==== 
 +Please refer to the link: [[https://docs.gl-inet.com/en/3/troubleshooting/debrick/]]
  
-If ''sysupgrade'' does not support this router, use ''mtd''.+===== Failsafe mode ===== 
 +-> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]]
  
-  * Login as root via SSH on 192.168.1.1, then enter the following commands:+==== Reset Button ==== 
 +On devices with a physical reset button, OpenWrt can be reset to default settings without serial or SSH access. 
 + 
 +  - Power on the device and wait for the status led to stop flashing (or go into failsafe mode, as described above). 
 +  - Press and hold the reset button for 10 seconds 
 +  - Release the reset button. 
 + 
 +The device will do a hard factory reset (see below) and then reboot. This operation can be slow on some devices, so wait a few minutes before connecting again. 
 + 
 +==== Soft Factory Reset ==== 
 +If you want a clean slate, there’s no need to flash again; just enter the following commands. Your device's settings will be reset to defaults like when OpenWrt was first installed. 
 + 
 +Issuing ''firstboot'' or ''jffs2reset'' command will attempt to delete all files from the jffs2 overlay partition. Note that this "soft reset" is performed with file system actions, so in some cases it is not enough.
  
 <code> <code>
-cd /tmp +firstboot && reboot
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc +
-mtd write /tmp/xxx.abc linux && reboot+
 </code> </code>
  
-</WRAP>+Note: If the commands above (all on one line) don't work, try those commands on separate lines in the terminal.
  
-===== Debricking ===== +Notefor most routers, "firstboot" actually just issues a "jffs2reset" command, so there is not much difference compared to the "hard reset" advice below.
--> [[docs:guide-user:troubleshooting:generic.debrick]]+
  
-===== Failsafe mode ===== +Noteif you're issuing this command inside a bash script, remember to add the option -y to force firstboot: 
--> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]]+ 
 +<code> 
 +firstboot -y && reboot 
 +</code>
  
 ===== Basic configuration ===== ===== Basic configuration =====
Line 215: Line 147:
  
 ===== Specific Configuration ===== ===== Specific Configuration =====
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
- 
 ==== Network interfaces ==== ==== Network interfaces ====
-The default network configuration is: 
-^ Interface Name   ^ Description                  ^ Default configuration    ^ 
-| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   | 
-| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | 
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | 
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | 
  
-</WRAP>+Base on the OpenWrt firmware, the default network configuration is: 
 +^ Interface Name   ^ Description ^ Default configuration    ^ 
 +| br-lan | LAN & WiFi | 192.168.1.1/24   | 
 +| eth0   | WAN port   | DHCP client      | 
 +| eth1   | LAN port   | 192.168.1.1/24   | 
 +| wlan0  | WiFi 2.4G  | Disable          |
  
-==== Switch Ports (for VLANs==== +Base on the OEM(GL.iNetfirmware, the default network configuration is: 
-<WRAP BOX> +^ Interface Name   ^ Description ^ Default configuration    ^ 
-FIXME Please fill in real values for this devicethen remove the EXAMPLEs+| br-lan | LAN & WiFi | 192.168.8.1/24   | 
 +| eth0   | WAN port   | DHCP client      | 
 +| eth1   | LAN port   | 192.168.8.1/24   | 
 +| wlan0  | WiFi 2.4G  | GL-X300B-xxx     |
  
-Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. 
-^ Port             ^ Switch port   ^ 
-| Internet (WAN)   | EXAMPLE 4     | 
-| LAN 1            | EXAMPLE 3     | 
-| LAN 2            | EXAMPLE 2     | 
-| LAN 3            | EXAMPLE 1     | 
-| LAN 4            | EXAMPLE 0     | 
- 
-</WRAP> 
  
 ==== Buttons ==== ==== Buttons ====
 -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s).
 Here, we merely name the buttons, so we can use them in the above Howto. Here, we merely name the buttons, so we can use them in the above Howto.
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
  
 The GL.iNet GL-X300B has the following buttons: The GL.iNet GL-X300B has the following buttons:
  
-^ BUTTON                       ^ Event   ^ +^ BUTTON   ^ Event   ^ 
-EXAMPLE Reset                |  reset  +| Reset    |  reset  |
-| EXAMPLE Secure Easy Setup    |   ses   | +
-| EXAMPLE No buttons at all.      -    |+
  
-</WRAP> 
  
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-<WRAP BOX> 
-FIXME 
-  - This table is automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If you see "Nothing." instead of a table, please **edit this section and adjust the filters with the proper Brand and Model.** Just try, it's easy. 
-  - If you still don't see a table here, or a table filled with '¿': [[toh:start|Is there already a Techdata page available]] for GL.iNet GL-X300B ? If not: [[meta:create_new_dataentry_page|Create one]]. 
-  - If you see a table with the desired device data, everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If it still doesn't work: Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
- 
 ---- datatemplatelist dttpllist ---- ---- datatemplatelist dttpllist ----
 template: meta:template_datatemplatelist template: meta:template_datatemplatelist
Line 275: Line 181:
 filter  : Brand=GL.iNet filter  : Brand=GL.iNet
 filter  : Model=GL-X300B filter  : Model=GL-X300B
-filter  : Versions=+filter  : Versions=v1
 ---- ----
  
Line 315: Line 221:
 </WRAP> </WRAP>
  
-^ Serial connection parameters\\ for GL.iNet GL-X300B @@Version@@ | EXAMPLE 115200, 8N1 |+^ Serial connection parameters\\ for GL.iNet GL-X300B | EXAMPLE 115200, 8N1 |
  
 ==== JTAG ==== ==== JTAG ====
Line 334: Line 240:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki> 
 +[    0.000000] Linux version 4.14.221 (glinet@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11257-5090152ae3)) #0 Mon Feb 15 15:22:37 2021 
 +[    0.000000] bootconsole [early0] enabled 
 +[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) 
 +[    0.000000] MIPS: machine is GL.iNet GL-X300B (NOR) 
 +[    0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000]  memory: 08000000 @ 00000000 (usable) 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] On node 0 totalpages: 32768 
 +[    0.000000] free_area_init_node: node 0, pgdat 805d3a90, node_mem_map 81007dc0 
 +[    0.000000]   Normal zone: 256 pages used for memmap 
 +[    0.000000]   Normal zone: 0 pages reserved 
 +[    0.000000]   Normal zone: 32768 pages, LIFO batch:7 
 +[    0.000000] random: get_random_bytes called from start_kernel+0x98/0x494 with crng_init=0 
 +[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 
 +[    0.000000] pcpu-alloc: [0] 0  
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512 
 +[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 
 +[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) 
 +[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] Memory: 122404K/131072K available (4419K kernel code, 160K rwdata, 1008K rodata, 1252K init, 218K bss, 8668K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS: 51 
 +[    0.000000] CPU clock: 650.000 MHz 
 +[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns 
 +[    0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns 
 +[    0.008251] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688) 
 +[    0.074866] pid_max: default: 32768 minimum: 301 
 +[    0.079942] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.086914] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.098699] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.109125] futex hash table entries: 256 (order: -1, 3072 bytes) 
 +[    0.115658] pinctrl core: initialized pinctrl subsystem 
 +[    0.122399] NET: Registered protocol family 16 
 +[    0.153368] clocksource: Switched to clocksource MIPS 
 +[    0.159741] NET: Registered protocol family 2 
 +[    0.165275] TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.172631] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.179398] TCP: Hash tables configured (established 1024 bind 1024) 
 +[    0.186269] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.192439] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.199377] NET: Registered protocol family 1 
 +[    0.204049] PCI: CLS 0 bytes, default 32 
 +[    0.207025] Crashlog allocated RAM at address 0x3f00000 
 +[    0.213959] workingset: timestamp_bits=30 max_order=15 bucket_order=0 
 +[    0.225986] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.232132] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.253419] io scheduler noop registered 
 +[    0.257559] io scheduler deadline registered (default) 
 +[    0.265166] pinctrl-single 1804002c.pinmux: 576 pins at pa b804002c size 72 
 +[    0.273206] gpio-export gpio-export: 3 gpio(s) exported 
 +[    0.279524] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled 
 +[    0.288538] Serial port to 485 enable,rs485txen_gpio = gpio1  
 +[    0.294813] console [ttyS0] disabled 
 +[    0.298612] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A 
 +[    0.307735] console [ttyS0] enabled 
 +[    0.315301] bootconsole [early0] disabled 
 +[    0.342216] m25p80 spi0.0: w25q128 (16384 Kbytes) 
 +[    0.347176] 4 fixed-partitions partitions found on MTD device spi0.0 
 +[    0.353759] Creating 4 MTD partitions on "spi0.0": 
 +[    0.358715] 0x000000000000-0x000000040000 : "u-boot" 
 +[    0.364689] 0x000000040000-0x000000050000 : "u-boot-env" 
 +[    0.370962] 0x000000050000-0x000000060000 : "art" 
 +[    0.376651] 0x000000060000-0x000001000000 : "firmware" 
 +[    0.385340] 2 uimage-fw partitions found on MTD device firmware 
 +[    0.391461] Creating 2 MTD partitions on "firmware": 
 +[    0.396645] 0x000000000000-0x0000001d0000 : "kernel" 
 +[    0.402544] 0x0000001d0000-0x000000fa0000 : "rootfs" 
 +[    0.408468] mtd: device 5 (rootfs) set to be root filesystem 
 +[    0.414411] 1 squashfs-split partitions found on MTD device rootfs 
 +[    0.420809] 0x000000b70000-0x000000fa0000 : "rootfs_data" 
 +[    0.429566] spi-nand: unknown raw ID 00000000 
 +[    0.434133] spi-nand: Failed to detect a SPI NAND (err = -19). 
 +[    0.440826] libphy: Fixed MDIO Bus: probed 
 +[    0.784474] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe. 
 +[    1.463750] libphy: ag71xx_mdio: probed 
 +[    1.753836] mdio-bus.0:1f: Found an AR934X built-in switch 
 +[    1.759679] libphy: ar7240sw_mdio: probed 
 +[    1.821020] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] 
 +[    1.830982] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: gmii 
 +[    1.839316] NET: Registered protocol family 10 
 +[    1.848657] Segment Routing with IPv6 
 +[    1.852536] NET: Registered protocol family 17 
 +[    1.857234] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 
 +[    1.870629] 8021q: 802.1Q VLAN Support v1.8 
 +[    2.215556] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=004dd042, driver=Generic PHY] 
 +[    2.226260] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii 
 +[    2.237896] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. 
 +[    2.252844] Freeing unused kernel memory: 1252K 
 +[    2.257561] This architecture does not have kernel memory protection. 
 +[    2.533410] random: fast init done 
 +[    2.918123] init: Console is alive 
 +[    2.921872] init: - watchdog - 
 +[    4.811550] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    4.997028] usbcore: registered new interface driver usbfs 
 +[    5.002809] usbcore: registered new interface driver hub 
 +[    5.008436] usbcore: registered new device driver usb 
 +[    5.019695] hw_wdt enter probe 
 +[    5.022866] feed dog gpio = gpio2  
 +[    5.026579] watchdog enable gpio = gpio12  
 +[    5.030887] feed watchdog interval 100000000 ns 
 +[    5.042315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
 +[    5.058765] SCSI subsystem initialized 
 +[    5.068251] ehci-platform: EHCI generic platform driver 
 +[    5.073975] ehci-platform 1b000000.usb: EHCI Host Controller 
 +[    5.079860] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 
 +[    5.088090] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000 
 +[    5.123413] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 
 +[    5.130685] hub 1-0:1.0: USB hub found 
 +[    5.134993] hub 1-0:1.0: 1 port detected 
 +[    5.142647] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
 +[    5.151132] ohci-platform: OHCI generic platform driver 
 +[    5.159148] uhci_hcd: USB Universal Host Controller Interface driver 
 +[    5.170584] usbcore: registered new interface driver usb-storage 
 +[    5.179260] usbcore: registered new interface driver uas 
 +[    5.185635] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[    5.203635] init: - preinit - 
 +[    5.757099] usb 1-1: new high-speed USB device number 2 using ehci-platform 
 +[    6.067083] random: procd: uninitialized urandom read (4 bytes read) 
 +[    6.462592] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    6.613151] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    7.510236] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready 
 +[    8.574549] eth1: link up (1000Mbps/Full duplex) 
 +[    8.579360] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready 
 +[   10.763587] mount_root: loading kmods from internal overlay 
 +[   10.847473] kmodloader: loading kernel modules from //etc/modules-boot.d/
 +[   10.859379] kmodloader: done loading kernel modules from //etc/modules-boot.d/
 +[   11.114326] block: attempting to load /etc/config/fstab 
 +[   11.121673] block: unable to load configuration (fstab: Entry not found) 
 +[   11.128840] block: no usable configuration 
 +[   11.133973] mount_root: jffs2 not ready yet, using temporary tmpfs overlay 
 +[   11.218859] urandom-seed: Seed file not found (/etc/urandom.seed) 
 +[   11.324244] eth1: link down 
 +[   11.339789] procd: - early - 
 +[   11.342883] procd: - watchdog - 
 +[   12.038875] urandom_read: 5 callbacks suppressed 
 +[   12.038884] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   12.125871] procd: - watchdog - 
 +[   12.129431] procd: - ubus - 
 +[   12.398931] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   12.656676] procd: - init - 
 +[   14.787409] kmodloader: loading kernel modules from /etc/modules.d/
 +[   14.842390] tun: Universal TUN/TAP device driver, 1.6 
 +[   14.886607] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[   14.948771] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) 
 +[   15.100180] urngd: v1.0.2 started. 
 +[   15.227473] Netfilter messages via NETLINK v0.30. 
 +[   15.255301] ip_set: protocol 6 
 +[   15.374827] Mirror/redirect action on 
 +[   15.411167] u32 classifier 
 +[   15.414061]     input device check on 
 +[   15.417841]     Actions configured 
 +[   15.486161] GACT probability on 
 +[   15.518155] Simple TC action Loaded 
 +[   15.619995] usbcore: registered new interface driver cdc_acm 
 +[   15.625925] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 
 +[   15.685435] usbcore: registered new interface driver cdc_wdm 
 +[   15.699049] random: crng init done 
 +[   15.705429] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b 
 +[   15.713346] Backport generated by backports.git v4.19.161-1-0-g4bb568fe 
 +[   15.798148] Ebtables v2.0 registered 
 +[   15.810241] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[   15.845543] usbcore: registered new interface driver ipheth 
 +[   16.127458] ctnetlink v0.93: registering with nfnetlink. 
 +[   16.560695] usbcore: registered new interface driver usbserial 
 +[   16.566883] usbcore: registered new interface driver usbserial_generic 
 +[   16.573764] usbserial: USB Serial support registered for generic 
 +[   16.630456] wireguard: WireGuard 1.0.20200611 loaded. See www.wireguard.com for information. 
 +[   16.639266] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. 
 +[   16.854548] xt_time: kernel timezone is -0000 
 +[   16.862912] usbcore: registered new interface driver cdc_ether 
 +[   16.898278] usbcore: registered new interface driver cdc_ncm 
 +[   17.095723] usbcore: registered new interface driver cp210x 
 +[   17.101558] usbserial: USB Serial support registered for cp210x 
 +[   17.144965] usbcore: registered new interface driver huawei_cdc_ncm 
 +[   17.338297] PPP generic driver version 2.4.2 
 +[   17.365130] PPP MPPE Compression module registered 
 +[   17.392444] NET: Registered protocol family 24 
 +[   17.423719] qmi_wwan 1-1:1.4: cdc-wdm0: USB WDM device 
 +[   17.429078] qmi_wwan 1-1:1.4: QuectelEC25&EC21&EG91&EG95&EG06&EP06&EM06&BG96&AG35 work on RawIP mode 
 +[   17.474336] qmi_wwan 1-1:1.4 wwan0: register 'qmi_wwan' at usb-1b000000.usb-1, WWAN/QMI device, 22:1f:55:1b:49:55 
 +[   17.485236] usbcore: registered new interface driver qmi_wwan 
 +[   17.522089] usbcore: registered new interface driver rndis_host 
 +[   17.608825] usbcore: registered new interface driver sierra 
 +[   17.614750] usbserial: USB Serial support registered for Sierra USB modem 
 +[   17.656263] usbcore: registered new interface driver sierra_net 
 +[   17.820312] usbcore: registered new interface driver option 
 +[   17.826255] usbserial: USB Serial support registered for GSM modem (1-port) 
 +[   17.833788] option 1-1:1.0: GSM modem (1-port) converter detected 
 +[   17.840361] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 
 +[   17.847621] option 1-1:1.1: GSM modem (1-port) converter detected 
 +[   17.854259] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 
 +[   17.861444] option 1-1:1.2: GSM modem (1-port) converter detected 
 +[   17.868101] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2 
 +[   17.875365] option 1-1:1.3: GSM modem (1-port) converter detected 
 +[   17.881937] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3 
 +[   18.126394] usbcore: registered new interface driver rt2800usb 
 +[   18.191618] ath: EEPROM regdomain: 0x0 
 +[   18.191629] ath: EEPROM indicates default country code should be used 
 +[   18.191632] ath: doing EEPROM country->regdmn map search 
 +[   18.191648] ath: country maps to regdmn code: 0x3a 
 +[   18.191654] ath: Country alpha2 being used: US 
 +[   18.191657] ath: Regpair used: 0x3a 
 +[   18.204367] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' 
 +[   18.206218] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=12 
 +[   18.279132] kmodloader: done loading kernel modules from /etc/modules.d/
 +[   28.755821] usb 1-1: USB disconnect, device number 2 
 +[   28.756177] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 
 +[   28.756284] option 1-1:1.0: device disconnected 
 +[   28.756729] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 
 +[   28.756839] option 1-1:1.1: device disconnected 
 +[   28.757289] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 
 +[   28.757397] option 1-1:1.2: device disconnected 
 +[   28.757838] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 
 +[   28.757950] option 1-1:1.3: device disconnected 
 +[   28.758269] qmi_wwan 1-1:1.4 wwan0: unregister 'qmi_wwan' usb-1b000000.usb-1, WWAN/QMI device 
 +[   43.153404] usb 1-1: new high-speed USB device number 3 using ehci-platform 
 +[   43.365975] option 1-1:1.0: GSM modem (1-port) converter detected 
 +[   43.366243] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 
 +[   43.366885] option 1-1:1.1: GSM modem (1-port) converter detected 
 +[   43.367122] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 
 +[   43.367788] option 1-1:1.2: GSM modem (1-port) converter detected 
 +[   43.368046] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2 
 +[   43.368766] option 1-1:1.3: GSM modem (1-port) converter detected 
 +[   43.369039] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3 
 +[   43.393976] qmi_wwan 1-1:1.4: cdc-wdm0: USB WDM device 
 +[   43.393995] qmi_wwan 1-1:1.4: QuectelEC25&EC21&EG91&EG95&EG06&EP06&EM06&BG96&AG35 work on RawIP mode 
 +[   43.395268] qmi_wwan 1-1:1.4 wwan0: register 'qmi_wwan' at usb-1b000000.usb-1, WWAN/QMI device, 22:1f:55:1b:49:55 
 +[  104.617583] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready 
 +[  105.127394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +[  105.734216] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 
 +[  105.734241] jffs2_build_filesystem(): unlocking the mtd device...  
 +[  105.734323] done. 
 +[  105.734327] jffs2_build_filesystem(): erasing all blocks after the end marker...  
 +[  106.242102] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready 
 +[  106.249289] eth1: link up (1000Mbps/Full duplex) 
 +[  106.255648] br-lan: port 1(eth1) entered blocking state 
 +[  106.255662] br-lan: port 1(eth1) entered disabled state 
 +[  106.255996] device eth1 entered promiscuous mode 
 +[  106.264757] br-lan: port 1(eth1) entered blocking state 
 +[  106.264772] br-lan: port 1(eth1) entered forwarding state 
 +[  106.307585] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +[  108.416499] eth0: link up (100Mbps/Full duplex) 
 +[  108.416549] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[  113.548246] br-lan: port 2(wlan0) entered blocking state 
 +[  113.548260] br-lan: port 2(wlan0) entered disabled state 
 +[  113.548609] device wlan0 entered promiscuous mode 
 +[  116.309060] br-lan: port 2(wlan0) entered blocking state 
 +[  116.309075] br-lan: port 2(wlan0) entered forwarding state 
 +[  131.659186] done. 
 +[  131.659231] jffs2: notice: (3719) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. 
 +[  133.579428] overlayfs: upper fs does not support tmpfile. 
 +[  143.128895] device wlan0 left promiscuous mode 
 +[  143.129016] br-lan: port 2(wlan0) entered disabled state 
 +[  145.717726] br-lan: port 2(wlan0) entered blocking state 
 +[  145.717740] br-lan: port 2(wlan0) entered disabled state 
 +[  145.718081] device wlan0 entered promiscuous mode 
 +[  147.324494] br-lan: port 2(wlan0) entered blocking state 
 +[  147.324509] br-lan: port 2(wlan0) entered forwarding state 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki> 
 +[    0.000000] Linux version 4.14.221 (linux@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11306-c4a6851c72)) #0 Mon Feb 15 15:22:37 2021 
 +[    0.000000] bootconsole [early0] enabled 
 +[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) 
 +[    0.000000] MIPS: machine is GL.iNet GL-X300B (NOR) 
 +[    0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000]  memory: 08000000 @ 00000000 (usable) 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] On node 0 totalpages: 32768 
 +[    0.000000] free_area_init_node: node 0, pgdat 8057fc80, node_mem_map 81007dc0 
 +[    0.000000]   Normal zone: 256 pages used for memmap 
 +[    0.000000]   Normal zone: 0 pages reserved 
 +[    0.000000]   Normal zone: 32768 pages, LIFO batch:7 
 +[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x47c with crng_init=0 
 +[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 
 +[    0.000000] pcpu-alloc: [0] 0  
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512 
 +[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 
 +[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) 
 +[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] Memory: 122800K/131072K available (4147K kernel code, 145K rwdata, 960K rodata, 1204K init, 205K bss, 8272K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS: 51 
 +[    0.000000] CPU clock: 650.000 MHz 
 +[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns 
 +[    0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns 
 +[    0.008236] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688) 
 +[    0.074858] pid_max: default: 32768 minimum: 301 
 +[    0.079928] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.086897] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.098442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.108865] futex hash table entries: 256 (order: -1, 3072 bytes) 
 +[    0.115363] pinctrl core: initialized pinctrl subsystem 
 +[    0.121377] NET: Registered protocol family 16 
 +[    0.149654] clocksource: Switched to clocksource MIPS 
 +[    0.156075] NET: Registered protocol family 2 
 +[    0.161437] TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.168797] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.175567] TCP: Hash tables configured (established 1024 bind 1024) 
 +[    0.182426] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.188594] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.195504] NET: Registered protocol family 1 
 +[    0.200164] PCI: CLS 0 bytes, default 32 
 +[    0.204210] Crashlog allocated RAM at address 0x3f00000 
 +[    0.211087] workingset: timestamp_bits=30 max_order=15 bucket_order=0 
 +[    0.222892] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.229037] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.249545] io scheduler noop registered 
 +[    0.253739] io scheduler deadline registered (default) 
 +[    0.261287] pinctrl-single 1804002c.pinmux: 576 pins at pa b804002c size 72 
 +[    0.269309] gpio-export gpio-export: 3 gpio(s) exported 
 +[    0.275613] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +[    0.282931] Serial port to 485 enable,rs485txen_gpio = gpio1  
 +[    0.289120] console [ttyS0] disabled 
 +[    0.292979] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A 
 +[    0.302099] console [ttyS0] enabled 
 +[    0.309663] bootconsole [early0] disabled 
 +[    0.333791] m25p80 spi0.0: w25q128 (16384 Kbytes) 
 +[    0.338705] 4 fixed-partitions partitions found on MTD device spi0.0 
 +[    0.345296] Creating 4 MTD partitions on "spi0.0": 
 +[    0.350264] 0x000000000000-0x000000040000 : "u-boot" 
 +[    0.356193] 0x000000040000-0x000000050000 : "u-boot-env" 
 +[    0.362515] 0x000000050000-0x000000060000 : "art" 
 +[    0.368083] 0x000000060000-0x000001000000 : "firmware" 
 +[    0.376707] 2 uimage-fw partitions found on MTD device firmware 
 +[    0.382882] Creating 2 MTD partitions on "firmware": 
 +[    0.388014] 0x000000000000-0x0000001b0000 : "kernel" 
 +[    0.393902] 0x0000001b0000-0x000000fa0000 : "rootfs" 
 +[    0.399766] mtd: device 5 (rootfs) set to be root filesystem 
 +[    0.405654] 1 squashfs-split partitions found on MTD device rootfs 
 +[    0.412068] 0x0000003d0000-0x000000fa0000 : "rootfs_data" 
 +[    0.420792] spi-nand: unknown raw ID 00000000 
 +[    0.425306] spi-nand: Failed to detect a SPI NAND (err = -19). 
 +[    0.432058] libphy: Fixed MDIO Bus: probed 
 +[    0.770758] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe. 
 +[    1.450038] libphy: ag71xx_mdio: probed 
 +[    1.740120] mdio-bus.0:1f: Found an AR934X built-in switch 
 +[    1.745962] libphy: ar7240sw_mdio: probed 
 +[    1.807266] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] 
 +[    1.817218] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: gmii 
 +[    1.825642] NET: Registered protocol family 10 
 +[    1.834859] Segment Routing with IPv6 
 +[    1.838744] NET: Registered protocol family 17 
 +[    1.843453] 8021q: 802.1Q VLAN Support v1.8 
 +[    2.191847] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=004dd042, driver=Generic PHY] 
 +[    2.202543] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii 
 +[    2.214700] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. 
 +[    2.229381] Freeing unused kernel memory: 1204K 
 +[    2.234096] This architecture does not have kernel memory protection. 
 +[    2.529667] random: fast init done 
 +[    2.967222] init: Console is alive 
 +[    2.971075] init: - watchdog - 
 +[    3.982783] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    4.058301] usbcore: registered new interface driver usbfs 
 +[    4.064103] usbcore: registered new interface driver hub 
 +[    4.069713] usbcore: registered new device driver usb 
 +[    4.084458] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
 +[    4.092626] ehci-platform: EHCI generic platform driver 
 +[    4.098267] ehci-platform 1b000000.usb: EHCI Host Controller 
 +[    4.104214] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 
 +[    4.112435] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000 
 +[    4.139690] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 
 +[    4.146892] hub 1-0:1.0: USB hub found 
 +[    4.151241] hub 1-0:1.0: 1 port detected 
 +[    4.156615] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[    4.174609] init: - preinit - 
 +[    4.740928] usb 1-1: new high-speed USB device number 2 using ehci-platform 
 +[    5.026674] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    5.197323] random: procd: uninitialized urandom read (4 bytes read) 
 +[    5.245617] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    5.583228] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready 
 +[    6.660920] eth1: link up (1000Mbps/Full duplex) 
 +[    6.665739] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready 
 +[    8.784532] mount_root: loading kmods from internal overlay 
 +[    8.817074] kmodloader: loading kernel modules from //etc/modules-boot.d/
 +[    8.824885] kmodloader: done loading kernel modules from //etc/modules-boot.d/
 +[    9.139410] block: attempting to load /etc/config/fstab 
 +[    9.145180] block: unable to load configuration (fstab: Entry not found) 
 +[    9.152260] block: no usable configuration 
 +[    9.157252] mount_root: jffs2 not ready yet, using temporary tmpfs overlay 
 +[    9.190501] urandom-seed: Seed file not found (/etc/urandom.seed) 
 +[    9.221540] eth1: link down 
 +[    9.236815] procd: - early - 
 +[    9.239988] procd: - watchdog - 
 +[    9.913383] procd: - watchdog - 
 +[    9.916953] procd: - ubus - 
 +[   10.082437] urandom_read: 5 callbacks suppressed 
 +[   10.082445] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   10.152611] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   10.160623] procd: - init - 
 +[   10.775253] kmodloader: loading kernel modules from /etc/modules.d/
 +[   10.915806] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[   10.938040] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b 
 +[   10.946018] Backport generated by backports.git v4.19.161-1-0-g4bb568fe 
 +[   10.972104] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[   10.997780] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) 
 +[   11.123132] xt_time: kernel timezone is -0000 
 +[   11.244879] PPP generic driver version 2.4.2 
 +[   11.260866] NET: Registered protocol family 24 
 +[   11.343090] ath: EEPROM regdomain: 0x0 
 +[   11.343099] ath: EEPROM indicates default country code should be used 
 +[   11.343102] ath: doing EEPROM country->regdmn map search 
 +[   11.343118] ath: country maps to regdmn code: 0x3a 
 +[   11.343124] ath: Country alpha2 being used: US 
 +[   11.343127] ath: Regpair used: 0x3a 
 +[   11.355685] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' 
 +[   11.357481] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=12 
 +[   11.386329] urngd: v1.0.2 started. 
 +[   11.451505] kmodloader: done loading kernel modules from /etc/modules.d/
 +[   11.862445] random: crng init done 
 +[   31.966808] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 
 +[   31.989780] jffs2_build_filesystem(): unlocking the mtd device...  
 +[   31.989848] done. 
 +[   31.998219] jffs2_build_filesystem(): erasing all blocks after the end marker...  
 +[   35.253263] eth1: link up (1000Mbps/Full duplex) 
 +[   35.266457] br-lan: port 1(eth1) entered blocking state 
 +[   35.271916] br-lan: port 1(eth1) entered disabled state 
 +[   35.277613] device eth1 entered promiscuous mode 
 +[   35.317135] br-lan: port 1(eth1) entered blocking state 
 +[   35.322598] br-lan: port 1(eth1) entered forwarding state 
 +[   35.328358] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready 
 +[   35.444708] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +[   36.259890] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[   83.806480] done. 
 +[   83.808515] jffs2: notice: (1074) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. 
 +[   83.973023] overlayfs: upper fs does not support tmpfile. 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1