Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
toh:gl.inet:gl-e750 [2021/12/22 10:38] – alzhaotoh:gl.inet:gl-e750 [2024/02/12 11:13] (current) – external edit 127.0.0.1
Line 6: Line 6:
  
  
-//Mudi by GL.iNet, is the best OpenWrt portable 4G LTE privacy router for road warriors and business travelers who want to secure their data and protect them from cyber criminals.//+Mudi by GL.iNet, is the best OpenWrt portable 4G LTE privacy router for road warriors and business travelers who want to secure their data and protect them from cyber criminals.
  
-<WRAP BOX> 
 Mudi has different models based on the PCIe 3G/4G LTE module. GL-E750C4 is with CAT4 Module, and GL-E750C6 is with CAT6 Module. All the sub-modules share the same firmware. If you want to learn more about Mudi, please visit: https://www.gl-inet.com/products/gl-e750/ Mudi has different models based on the PCIe 3G/4G LTE module. GL-E750C4 is with CAT4 Module, and GL-E750C6 is with CAT6 Module. All the sub-modules share the same firmware. If you want to learn more about Mudi, please visit: https://www.gl-inet.com/products/gl-e750/
-</WRAP> 
  
 /*****/ /*****/
Line 16: Line 14:
 /*****/ /*****/
  
-{{media:e750.jpeg?200|Generic Router}}+{{media:gl.inet:gl-e750.jpeg?200|Generic Router}}
  
 <WRAP BOX> <WRAP BOX>
Line 34: Line 32:
  
 ===== Supported Versions ===== ===== Supported Versions =====
----- datatable ---- +<!-- ToH: { 
-cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Search_search-forums, Device Techdata_pageid +  "source": "json", 
-headers : Brand, Model, Version, Current Release, OEM Info, Forum Search, Technical Data +  "dom": "t", 
-align   : c,c,c,c,c,c,c +  "paging": false, 
-filter  : Brand=GL.iNet +  "rotate": true, 
-filter  : Model=GL-E750 +  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"], 
-filter  : Versions~ +  "filterColumns": {"brand": "^GL\\.iNet$", "model": "^GL-E750$"} 
-filter  : OEM Info=https://www.gl-inet.com/products/gl-e750 +} -->
-filter  : Forum Search= +
-filter  : Technical Data=[[:toh:hwdata:gl.inet:gl.inet_gl-e750|21.02.1]]+
  
-^ Brand1  ^ Model1         ^ 
-| GL.iNet | GL-E750        | 
- 
----- 
- 
-/* If no unsupported functions known, comment out the following datatable or delete it. */ 
----- datatable ---- 
-cols    : Unsupported Functions_unsupporteds 
-filter  : Brand=GL.iNet 
-filter  : Model=GL-E750 
-filter  : Versions~ 
----- 
- 
-===== Experimental Versions ===== 
- 
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  
- *   The official Table of Hardware only lists current, stable versions of OpenWrt.  * 
- *   Use this space to describe any on-going efforts to create a newer version       * 
- *   of the firmware for this device. Provide links to firmware images,              * 
- *   active threads on the forum, or other sources of information.                   * 
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ 
- 
-//None at this time.// 
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
----- datatable ---- 
-cols    : GL-E750, v1, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
-header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
-align   : c,c,c,c,c,c,c,c,c,c,c,c,c 
-filter  : Brand=GL.iNet 
-filter  : Model=GL-E750 
-filter  : Versions~ 
----- 
- 
  
 ===== Installation ===== ===== Installation =====
-/* stable release */ +<!-- ToH: { 
-/* uncomment once stable release is available +  "source": "json", 
----- datatable ---- +  "dom": "t", 
-cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url +  "paging": false, 
-headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock +  "rotate": true, 
-align   : c,c,c +  "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"], 
-filter  : Brand=GL.iNet +  "filterColumns": {"brand": "^GL\\.iNet$", "model": "^GL-E750$"} 
-filter  : Model=GL-E750 +} -->
-filter  : Versions~ +
----- +
-*/ +
- +
- +
-/* snapshot */ +
-/* delete once stable release is available */ +
----- datatable ---- +
-cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt snapshot Install URL_url, Firmware OpenWrt snapshot Upgrade URL_url, Firmware OEM Stock URL_url +
-headers : Model, Version, Current Release, Firmware OpenWrt snapshot Install, Firmware OpenWrt snapshot Upgrade, Firmware OEM Stock +
-align   : c,c,c +
-filter  : Brand=GL.iNet +
-filter  : Model=GL-E750 +
-filter  : Versions~ +
-----+
  
  
Line 112: Line 61:
 ==== Flash Layout ==== ==== Flash Layout ====
 <WRAP BOX> <WRAP BOX>
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).// 
- 
 Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout.
-</WRAP> 
- 
-==== OEM easy installation ==== 
- 
-<WRAP BOX> 
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ 
-**//Remove / modify them if they do not apply to this particular device!//** 
- 
-This section deals with 
-  * How you install OpenWrt from a device freshly opened 
-  * The steps required such as reset to factory defaults if the device has already been configured 
- 
-**Note:** Reset router to factory defaults if it has been previously configured. 
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' 
-  * Upload .bin file to router 
-  * Wait for it to reboot 
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. 
-</WRAP> 
- 
-==== OEM installation using the TFTP method ==== 
- 
-->  [[docs:guide-user:installation:generic.flashing.tftp]] 
- 
-=== Specific values needed for tftp === 
- 
-<WRAP BOX> 
- 
-FIXME Enter values for "FILL-IN" below 
- 
-^ Bootloader tftp server IPv4 address  | FILL-IN   | 
-^ Bootloader MAC address (special)     | FILL-IN   | 
-^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | 
-^ TFTP transfer window                 | FILL-IN seconds                                | 
-^ TFTP window start                    | approximately FILL-IN seconds after power on   | 
-^ TFTP client required IP address      | FILL-IN                                        | 
  
 +Output 'cat /proc/mtd'
 +<code>
 +dev:    size   erasesize  name
 +mtd0: 00040000 00010000 "u-boot"
 +mtd1: 00010000 00010000 "u-boot-env"
 +mtd2: 00010000 00010000 "art"
 +mtd3: 00200000 00010000 "kernel"
 +mtd4: 00bc0000 00010000 "nor_reserved"
 +mtd5: 08000000 00020000 "ubi"
 +</code>
 </WRAP> </WRAP>
  
Line 156: Line 78:
 ->  [[docs:guide-user:installation:generic.sysupgrade]] ->  [[docs:guide-user:installation:generic.sysupgrade]]
  
-<WRAP BOX> 
  
-FIXME These are generic instructions. Update with your router's specifics.+==== GL.iNet Web Upgrade Process ====
  
 +  * Browse to ''<nowiki>http://192.168.8.1/#/upgrade</nowiki>'' GL.iNet Web Upgrade URL
 +  * Upload image file for sysupgrade
 +  * Choose whether to keep the configuration according to your needs, the default is to keep the configuration
 +  * Click install
 +  * Wait for reboot
 ==== LuCI Web Upgrade Process ==== ==== LuCI Web Upgrade Process ====
  
-  * Browse to ''<nowiki>http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/</nowiki>'' LuCI Upgrade URL+  * Browse to ''<nowiki>http://192.168.8.1/cgi-bin/luci/admin/system/flash</nowiki>'' LuCI Upgrade URL
   * Upload image file for sysupgrade to LuCI   * Upload image file for sysupgrade to LuCI
   * Wait for reboot   * Wait for reboot
Line 169: Line 95:
  
 If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line.
-There are two command line methods for upgrading: 
- 
-  * ''sysupgrade'' 
-  * ''mtd'' 
  
 Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
  
-=== sysupgrade === +  * Login as root via SSH on 192.168.8.1, then enter the following commands:
- +
-  * Login as root via SSH on 192.168.1.1, then enter the following commands:+
  
 <code> <code>
 cd /tmp cd /tmp
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc +wget http://download.gl-inet.com/firmware/e750/release/openwrt-e750-3.203-0701.tar 
-sysupgrade /tmp/xxx.abc+sysupgrade /tmp/openwrt-e750-3.203-0701.tar
 </code> </code>
  
-=== mtd === +==== Upgrade via uboot ==== 
- +Please refer to the link: https://docs.gl-inet.com/en/3/troubleshooting/debrick/
-If ''sysupgrade'' does not support this router, use ''mtd''. +
- +
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: +
- +
-<code> +
-cd /tmp +
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc +
-mtd write /tmp/xxx.abc linux && reboot +
-</code> +
- +
-</WRAP> +
- +
-===== Debricking ===== +
--> [[docs:guide-user:troubleshooting:generic.debrick]]+
  
 ===== Failsafe mode ===== ===== Failsafe mode =====
Line 211: Line 117:
  
 ===== Specific Configuration ===== ===== Specific Configuration =====
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
  
 ==== Network interfaces ==== ==== Network interfaces ====
-The default network configuration is: +Base on the OEM(GL.iNet) firmware, the default network configuration is: 
-^ Interface Name   ^ Description                  ^ Default configuration    ^ +^ Interface Name   ^ Description ^ Default configuration    ^ 
-| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   | +| br-lan | LAN & WiFi | 192.168.8.1/24   | 
-| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | +| eth0   | WAN port   | DHCP             | 
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | +| eth1   | LAN port   | 192.168.8.1/24   | 
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | +| wlan0  | WiFi 5G    | GL-E750          | 
- +| wlan1  | WiFi 2.4G  | GL-E750          |
-</WRAP> +
- +
-==== Switch Ports (for VLANs) ==== +
-<WRAP BOX> +
-FIXME Please fill in real values for this device, then remove the EXAMPLEs +
- +
-Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. +
-^ Port             ^ Switch port   ^ +
-| Internet (WAN)   | EXAMPLE 4     | +
-| LAN 1            | EXAMPLE 3     | +
-| LAN 2            | EXAMPLE 2     | +
-| LAN 3            | EXAMPLE 1     | +
-| LAN 4            | EXAMPLE 0     | +
- +
-</WRAP>+
  
 ==== Buttons ==== ==== Buttons ====
Line 243: Line 131:
 Here, we merely name the buttons, so we can use them in the above Howto. Here, we merely name the buttons, so we can use them in the above Howto.
  
-<WRAP BOX> +The GL-E750 has the following buttons:
-FIXME Please fill in real values for this device, then remove the EXAMPLEs+
  
-The GL.iNet GL-E750 has the following buttons:+^ BUTTON            ^ Event   ^ 
 +| Reset             |  reset        | 
 +| Switch to up      |  gpio-1 (lo) | 
 +| Switch to down    |  gpio-1 (hi)  |
  
-^ BUTTON                       ^ Event   ^ 
-| EXAMPLE Reset                |  reset  | 
-| EXAMPLE Secure Easy Setup    |   ses   | 
-| EXAMPLE No buttons at all.   |    -    | 
- 
-</WRAP> 
  
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-<WRAP BOX> +<!-- ToH: { 
-FIXME +  "source": "json", 
-  - This table is automatically generated, **once the correct filters for Brand and Model are set.** +  "dom": "t", 
-  - If you see "Nothing." instead of a table, please **edit this section and adjust the filters with the proper Brand and Model.** Just try, it's easy. +  "paging": false, 
-  - If you still don't see a table here, or a table filled with '¿': [[toh:start|Is there already a Techdata page available]] for GL.iNet GL-E750 ? If not: [[meta:create_new_dataentry_page|Create one]]. +  "rotate": true, 
-  - If you see a table with the desired device data, everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. +  "shownColumns": ["brand", "model", "version", "devicetype", "availability", "supportedsincecommit", "supportedsincerel", "supportedcurrentrel", "unsupported_functions", "bootloader", "cpu", "target", "cpumhz", "flashmb", "rammb", "switch", "ethernet100mports", "ethernet1gports", "commentsnetworkports", "modem", "vlan", "wlan24ghz", "wlan50ghz", "wlanhardware", "wlancomments", "detachableantennas", "usbports", "sataports", "commentsusbsataports", "serial", "jtag", "ledcount", "buttoncount", "powersupply", "deviceid", "owrt_forum_topic_url", "wikideviurl", "oemdevicehomepageurl", "firmwareoemstockurl", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "comments"], 
-  - If it still doesn't work: Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. +  "filterColumns": {"brand": "^GL\\.iNet$", "model": "^GL-E750$"} 
-</WRAP> +} -->
- +
----- datatemplatelist dttpllist ---- +
-template: meta:template_datatemplatelist +
-cols    : Brand, Model, Versions, Device Type, Availability, Supported Since Commit_git, Supported since Rel, Supported current Rel, Unsupported, Bootloader, CPU, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Hardwares, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Power supply, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_ +
-filter  : Brand=GL.iNet +
-filter  : Model=GL-E750 +
-filter  : Versions= +
-----+
  
 ==== Photos ==== ==== Photos ====
Line 311: Line 187:
 </WRAP> </WRAP>
  
-^ Serial connection parameters\\ for GL.iNet GL-E750 @@Version@@ | EXAMPLE 115200, 8N1 |+^ Serial connection parameters\\ for GL.iNet GL-E750  | EXAMPLE 115200, 8N1 |
  
 ==== JTAG ==== ==== JTAG ====
Line 322: Line 198:
 -> [[docs:techref:bootloader]] -> [[docs:techref:bootloader]]
  
-===== Hardware mods ===== +Please refer to the link: https://docs.gl-inet.com/en/3/troubleshooting/debrick/
- +
-None so far.+
  
  
Line 330: Line 204:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+[    0.000000] Linux version 4.14.221 (glinet@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11257-5090152ae3)) #0 Mon Feb 15 15:22:37 2021 
 +[    0.000000] bootconsole [early0] enabled 
 +[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) 
 +[    0.000000] MIPS: machine is GL.iNet GL-E750 (NOR/NAND) 
 +[    0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000]  memory: 08000000 @ 00000000 (usable) 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] On node 0 totalpages: 32768 
 +[    0.000000] free_area_init_node: node 0, pgdat 805d3a90, node_mem_map 810072e0 
 +[    0.000000]   Normal zone: 256 pages used for memmap 
 +[    0.000000]   Normal zone: 0 pages reserved 
 +[    0.000000]   Normal zone: 32768 pages, LIFO batch:7 
 +[    0.000000] random: get_random_bytes called from start_kernel+0x98/0x494 with crng_init=0 
 +[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 
 +[    0.000000] pcpu-alloc: [0] 0  
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512 
 +[    0.000000] Kernel command line: rootfstype=squashfs,jffs2 rootfstype=squashfs,jffs2 
 +[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) 
 +[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] Memory: 122404K/131072K available (4419K kernel code, 160K rwdata, 1008K rodata, 1252K init, 218K bss, 8668K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS: 51 
 +[    0.000000] CPU clock: 650.000 MHz 
 +[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns 
 +[    0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns 
 +[    0.008247] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688) 
 +[    0.074858] pid_max: default: 32768 minimum: 301 
 +[    0.079928] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.086906] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.098372] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.108789] futex hash table entries: 256 (order: -1, 3072 bytes) 
 +[    0.115312] pinctrl core: initialized pinctrl subsystem 
 +[    0.121987] NET: Registered protocol family 16 
 +[    0.133610] PCI host bridge /ahb/pcie-controller@180c0000 ranges: 
 +[    0.140049]  MEM 0x0000000010000000..0x0000000013ffffff 
 +[    0.145599]   IO 0x0000000000000000..0x0000000000000000 
 +[    0.167159] PCI host bridge to bus 0000:00 
 +[    0.171492] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff] 
 +[    0.178782] pci_bus 0000:00: root bus resource [io  0x0000] 
 +[    0.184653] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] 
 +[    0.191811] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
 +[    0.200194] pci 0000:00:00.0: [168c:0050] type 00 class 0x028000 
 +[    0.200252] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] 
 +[    0.200305] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] 
 +[    0.200381] pci 0000:00:00.0: supports D1 
 +[    0.200389] pci 0000:00:00.0: PME# supported from D0 D1 D3hot 
 +[    0.200599] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 
 +[    0.200625] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit] 
 +[    0.208380] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref] 
 +[    0.218569] clocksource: Switched to clocksource MIPS 
 +[    0.224892] NET: Registered protocol family 2 
 +[    0.230381] TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.237734] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.244497] TCP: Hash tables configured (established 1024 bind 1024) 
 +[    0.251358] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.257524] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.264437] NET: Registered protocol family 1 
 +[    0.269114] PCI: CLS 0 bytes, default 32 
 +[    0.271896] Crashlog allocated RAM at address 0x3f00000 
 +[    0.278722] workingset: timestamp_bits=30 max_order=15 bucket_order=0 
 +[    0.290504] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.296645] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.317150] io scheduler noop registered 
 +[    0.321345] io scheduler deadline registered (default) 
 +[    0.328912] pinctrl-single 1804002c.pinmux: 576 pins at pa b804002c size 72 
 +[    0.336758] gpio-export gpio-export: 1 gpio(s) exported 
 +[    0.343024] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled 
 +[    0.352072] console [ttyS0] disabled 
 +[    0.355882] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A 
 +[    0.365027] console [ttyS0] enabled 
 +[    0.448600] bootconsole [early0] disabled 
 +[    0.561574] m25p80 spi0.0: w25q128 (16384 Kbytes) 
 +[    0.618065] 5 fixed-partitions partitions found on MTD device spi0.0 
 +[    0.694272] Creating 5 MTD partitions on "spi0.0": 
 +[    0.751763] 0x000000000000-0x000000040000 : "u-boot" 
 +[    0.812113] 0x000000040000-0x000000050000 : "u-boot-env" 
 +[    0.876612] 0x000000050000-0x000000060000 : "art" 
 +[    0.933831] 0x000000060000-0x000000260000 : "kernel" 
 +[    0.994128] 0x000000260000-0x000000e20000 : "nor_reserved" 
 +[    1.064002] spi-nand: Giga SPI NAND was found. 
 +[    1.117333] spi-nand: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 
 +[    1.208248] 1 fixed-partitions partitions found on MTD device spi0.1 
 +[    1.284525] Creating 1 MTD partitions on "spi0.1": 
 +[    1.342004] 0x000000000000-0x000008000000 : "ubi" 
 +[    1.826946] found bad block 7fe0000 
 +[    1.869504] libphy: Fixed MDIO Bus: probed 
 +[    2.258960] libphy: ag71xx_mdio: probed 
 +[    2.589041] mdio-bus.0:1f: Found an AR934X built-in switch 
 +[    2.655047] libphy: ar7240sw_mdio: probed 
 +[    3.090791] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=004dd042, driver=Generic PHY] 
 +[    3.205249] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii 
 +[    3.278953] NET: Registered protocol family 10 
 +[    3.335833] Segment Routing with IPv6 
 +[    3.379915] NET: Registered protocol family 17 
 +[    3.433251] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 
 +[    3.588744] 8021q: 802.1Q VLAN Support v1.8 
 +[    3.644664] UBI: auto-attach mtd5 
 +[    3.684460] ubi0: attaching mtd5 
 +[    4.158571] random: fast init done 
 +[    8.042887] ubi0: scanning is finished 
 +[    8.135938] ubi0: attached mtd5 (name "ubi", size 128 MiB) 
 +[    8.201811] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +[    8.284293] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +[    8.365758] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +[    8.449317] ubi0: good PEBs: 1023, bad PEBs: 1, corrupted PEBs: 0 
 +[    8.522446] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 
 +[    8.609139] ubi0: max/mean erase counter: 95/41, WL threshold: 4096, image sequence number: 966606896 
 +[    8.719821] ubi0: available PEBs: 0, total reserved PEBs: 1023, PEBs reserved for bad PEB handling: 19 
 +[    8.831642] ubi0: background thread "ubi_bgt0d" started, PID 317 
 +[    8.906964] block ubiblock0_0: created from ubi0:0(rootfs) 
 +[    8.972845] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem 
 +[    9.075139] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. 
 +[    9.167572] Freeing unused kernel memory: 1252K 
 +[    9.221928] This architecture does not have kernel memory protection. 
 +[   10.247904] init: Console is alive 
 +[   10.289018] init: - watchdog - 
 +[   13.689415] kmodloader: loading kernel modules from /etc/modules-boot.d/* 
 +[   13.981702] usbcore: registered new interface driver usbfs 
 +[   14.047662] usbcore: registered new interface driver hub 
 +[   14.111489] usbcore: registered new device driver usb 
 +[   14.183133] exFAT: Version 1.2.9 
 +[   14.258705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
 +[   14.346521] SCSI subsystem initialized 
 +[   14.397049] ehci-platform: EHCI generic platform driver 
 +[   14.460004] ehci-platform 1b000000.usb: EHCI Host Controller 
 +[   14.528006] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 
 +[   14.622047] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000 
 +[   14.718591] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 
 +[   14.793547] hub 1-0:1.0: USB hub found 
 +[   14.838964] hub 1-0:1.0: 1 port detected 
 +[   14.889686] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
 +[   14.965902] ohci-platform: OHCI generic platform driver 
 +[   15.031350] uhci_hcd: USB Universal Host Controller Interface driver 
 +[   15.112648] usbcore: registered new interface driver usb-storage 
 +[   15.187326] usbcore: registered new interface driver uas 
 +[   15.252135] kmodloader: done loading kernel modules from /etc/modules-boot.d/* 
 +[   15.349318] init: - preinit - 
 +[   15.409066] usb 1-1: new high-speed USB device number 2 using ehci-platform 
 +[   15.800699] hub 1-1:1.0: USB hub found 
 +[   15.856284] hub 1-1:1.0: 4 ports detected 
 +[   16.678252] usb 1-1.1: new high-speed USB device number 3 using ehci-platform 
 +[   17.007029] random: procd: uninitialized urandom read (4 bytes read) 
 +[   17.083852] usb-storage 1-1.1:1.0: USB Mass Storage device detected 
 +[   17.192144] scsi host0: usb-storage 1-1.1:1.0 
 +[   17.408901] usb 1-1.2: new high-speed USB device number 4 using ehci-platform 
 +[   17.608745] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   17.907381] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   18.015224] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   18.140678] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   18.241132] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   18.318994] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0233 PQ: 0 ANSI: 0 
 +[   19.167694] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +[   19.449505] sd 0:0:0:0: [sda] Attached SCSI removable disk 
 +[   21.311639] eth0: link up (100Mbps/Full duplex) 
 +[   21.367813] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   22.621637] mount_root: loading kmods from internal overlay 
 +[   22.767399] kmodloader: loading kernel modules from //etc/modules-boot.d/* 
 +[   22.854710] kmodloader: done loading kernel modules from //etc/modules-boot.d/* 
 +[   25.828776] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496 
 +[   26.157627] UBIFS (ubi0:1): recovery needed 
 +[   26.811696] UBIFS (ubi0:1): recovery completed 
 +[   26.865155] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" 
 +[   26.959152] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
 +[   27.078170] UBIFS (ubi0:1): FS size: 112246784 bytes (107 MiB, 884 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs) 
 +[   27.205534] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB) 
 +[   27.284924] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 7BD9356E-6F9C-4781-AE60-80B252A2D35E, small LPT model 
 +[   27.435298] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
 +[   27.555611] block: extroot: not configured 
 +[   27.605036] UBIFS (ubi0:1): un-mount UBI device 0 
 +[   27.663093] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops 
 +[   27.759505] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 499 
 +[   28.331606] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" 
 +[   28.425649] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
 +[   28.544730] UBIFS (ubi0:1): FS size: 112246784 bytes (107 MiB, 884 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs) 
 +[   28.672090] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB) 
 +[   28.751457] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 7BD9356E-6F9C-4781-AE60-80B252A2D35E, small LPT model 
 +[   28.915337] mount_root: loading kmods from internal overlay 
 +[   29.054576] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* 
 +[   29.161700] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* 
 +[   31.170472] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
 +[   31.278993] block: extroot: not configured 
 +[   31.339256] mount_root: switching to ubifs overlay 
 +[   31.510923] urandom-seed: Seeding with /etc/urandom.seed 
 +[   31.729177] eth0: link down 
 +[   31.774864] procd: - early - 
 +[   31.809554] procd: - watchdog - 
 +[   32.547101] urandom_read: 2 callbacks suppressed 
 +[   32.547110] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   32.677897] procd: - watchdog - 
 +[   32.786672] procd: - ubus - 
 +[   33.086859] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   33.407253] procd: - init - 
 +[   37.065053] kmodloader: loading kernel modules from /etc/modules.d/* 
 +[   37.334941] ntfs: driver 2.1.32 [Flags: R/O MODULE]. 
 +[   37.421574] urngd: v1.0.2 started. 
 +[   37.551524] tun: Universal TUN/TAP device driver, 1.6 
 +[   37.773789] GobiNet: 2018-12-21/SWI_2.55 
 +[   37.822317] usbcore: registered new interface driver GobiNet 
 +[   38.064222] random: crng init done 
 +[   38.155166] usbcore: registered new interface driver usbserial 
 +[   38.225309] usbcore: registered new interface driver usbserial_generic 
 +[   38.303721] usbserial: USB Serial support registered for generic 
 +[   38.839890] usbcore: registered new interface driver GobiSerial 
 +[   38.911104] usbserial: USB Serial support registered for GobiSerial 
 +[   38.986321] GobiSerial: 2015-08-27/SWI_2.25:GobiSerial 
 +[   39.611837] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[   39.827308] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) 
 +[   40.314578] Netfilter messages via NETLINK v0.30. 
 +[   40.486418] ip_set: protocol 6 
 +[   40.709987] Mirror/redirect action on 
 +[   40.870000] u32 classifier 
 +[   40.902473]     input device check on 
 +[   40.946356]     Actions configured 
 +[   41.243440] GACT probability on 
 +[   41.335169] Simple TC action Loaded 
 +[   41.422575] fuse init (API version 7.26) 
 +[   41.483464] usbcore: registered new interface driver cdc_acm 
 +[   41.551497] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 
 +[   41.651134] usbcore: registered new interface driver cdc_ether 
 +[   41.726236] usbcore: registered new interface driver cdc_ncm 
 +[   41.797089] usbcore: registered new interface driver cdc_wdm 
 +[   41.868006] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b 
 +[   41.959979] Backport generated by backports.git v4.19.161-1-0-g4bb568fe 
 +[   42.042643] usbcore: registered new interface driver cp210x 
 +[   42.109650] usbserial: USB Serial support registered for cp210x 
 +[   42.197251] Ebtables v2.0 registered 
 +[   42.242205] usbcore: registered new interface driver huawei_cdc_ncm 
 +[   42.321802] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[   42.388383] usbcore: registered new interface driver ipheth 
 +[   42.552155] ctnetlink v0.93: registering with nfnetlink. 
 +[   42.744694] qmi_wwan 1-1.2:1.4: cdc-wdm0: USB WDM device 
 +[   42.808525] qmi_wwan 1-1.2:1.4: QuectelEC25&EC21&EG91&EG95&EG06&EP06&EM06&BG96&AG35 work on RawIP mode 
 +[   42.922329] qmi_wwan 1-1.2:1.4 wwan0: register 'qmi_wwan' at usb-1b000000.usb-1.2, WWAN/QMI device, 06:21:a5:ac:c9:c9 
 +[   43.049953] usbcore: registered new interface driver qmi_wwan 
 +[   43.124288] usbcore: registered new interface driver rndis_host 
 +[   43.199084] usbcore: registered new interface driver sierra 
 +[   43.266047] usbserial: USB Serial support registered for Sierra USB modem 
 +[   43.352503] usbcore: registered new interface driver sierra_net 
 +[   43.440205] wireguard: WireGuard 1.0.20200611 loaded. See www.wireguard.com for information. 
 +[   43.541585] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. 
 +[   43.710231] xt_time: kernel timezone is -0000 
 +[   43.963548] usbcore: registered new interface driver option 
 +[   44.030534] usbserial: USB Serial support registered for GSM modem (1-port) 
 +[   44.114558] option 1-1.2:1.0: GSM modem (1-port) converter detected 
 +[   44.190056] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0 
 +[   44.273863] option 1-1.2:1.1: GSM modem (1-port) converter detected 
 +[   44.349385] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1 
 +[   44.433165] option 1-1.2:1.2: GSM modem (1-port) converter detected 
 +[   44.508723] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2 
 +[   44.592449] option 1-1.2:1.3: GSM modem (1-port) converter detected 
 +[   44.667981] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB3 
 +[   45.024355] PPP generic driver version 2.4.2 
 +[   45.081625] PPP MPPE Compression module registered 
 +[   45.141664] NET: Registered protocol family 24 
 +[   45.253329] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) 
 +[   45.323540] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 
 +[   45.698811] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2 
 +[   45.827218] ath10k_pci 0000:00:00.0: Falling back to user helper 
 +[   51.074293] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed 
 +[   51.193381] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/firmware-6.bin failed with error -2 
 +[   51.321852] ath10k_pci 0000:00:00.0: Falling back to user helper 
 +[   51.606090] firmware ath10k!QCA9887!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed 
 +[   51.951474] ath10k_pci 0000:00:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000 
 +[   52.062235] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1 
 +[   52.165867] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,ignore-otp,skip-clock-init,mfp,allows-mesh-bcast crc32 62f7565f 
 +[   52.362536] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/board-2.bin failed with error -2 
 +[   52.487829] ath10k_pci 0000:00:00.0: Falling back to user helper 
 +[   52.665234] firmware ath10k!QCA9887!hw1.0!board-2.bin: firmware_loading_store: map pages failed 
 +[   52.788427] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 546cca0d 
 +[   53.980237] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1 
 +[   54.220062] ath: EEPROM regdomain: 0x0 
 +[   54.220070] ath: EEPROM indicates default country code should be used 
 +[   54.220073] ath: doing EEPROM country->regdmn map search 
 +[   54.220086] ath: country maps to regdmn code: 0x3a 
 +[   54.220091] ath: Country alpha2 being used: US 
 +[   54.220094] ath: Regpair used: 0x3a 
 +[   54.351512] usbcore: registered new interface driver rt2800usb 
 +[   54.542600] ath: EEPROM regdomain: 0x0 
 +[   54.542610] ath: EEPROM indicates default country code should be used 
 +[   54.542613] ath: doing EEPROM country->regdmn map search 
 +[   54.542628] ath: country maps to regdmn code: 0x3a 
 +[   54.542633] ath: Country alpha2 being used: US 
 +[   54.542636] ath: Regpair used: 0x3a 
 +[   54.555521] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' 
 +[   54.557322] ieee80211 phy1: Atheros AR9531 Rev:2 mem=0xb8100000, irq=13 
 +[   54.723936] kmodloader: done loading kernel modules from /etc/modules.d/* 
 +[   71.943743] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready 
 +[   73.120879] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +[   73.129327] br-lan: port 1(eth0) entered blocking state 
 +[   73.129340] br-lan: port 1(eth0) entered disabled state 
 +[   73.129661] device eth0 entered promiscuous mode 
 +[   77.904056] eth0: link up (100Mbps/Full duplex) 
 +[   78.792186] br-lan: port 1(eth0) entered blocking state 
 +[   78.792200] br-lan: port 1(eth0) entered forwarding state 
 +[   86.122910] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware 
 +[   86.239949] br-lan: port 2(wlan0) entered blocking state 
 +[   86.239961] br-lan: port 2(wlan0) entered disabled state 
 +[   86.240296] device wlan0 entered promiscuous mode 
 +[   86.347561] br-lan: port 3(wlan1) entered blocking state 
 +[   86.347575] br-lan: port 3(wlan1) entered disabled state 
 +[   86.347909] device wlan1 entered promiscuous mode 
 +[   88.433427] br-lan: port 3(wlan1) entered blocking state 
 +[   88.433440] br-lan: port 3(wlan1) entered forwarding state 
 +[   88.830507] br-lan: port 2(wlan0) entered blocking state 
 +[   88.830523] br-lan: port 2(wlan0) entered forwarding state
 </WRAP>\\ </WRAP>\\
  
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
-<WRAP bootlog> +This device is special, with LCD screen, and the network port is expanded through the docking station. If you do not do development, it is not recommended to use the official OpenWrt firmware. It is very difficult to use.
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki> +
-</WRAP>\\+
  
 ===== Notes ===== ===== Notes =====
  • Last modified: 2021/12/22 10:38
  • by alzhao