| Both sides previous revision Previous revision Next revision | Previous revisionLast revisionBoth sides next revision |
| toh:friendlyelec:nanopi_r3s [2024/10/27 20:47] – [Hardware Highlights] kz26 | toh:friendlyelec:nanopi_r3s [2024/12/18 20:09] – move it lessload |
|---|
| ====== FriendlyElec NanoPi R3S ====== | ====== FriendlyARM NanoPi R3S ====== |
| |
| /* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY. */ | /* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY. */ |
| The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps Ethernet ports designed and developed by FriendlyElec for IoT applications. The NanoPi R3S uses the RK3566 SoC. It has two Gbps Ethernet ports and 2G LPDDR4X RAM, as well as optional 32GB eMMC. The NanoPi R3S can be optionally equipped with an integrated CNC anodized aluminum case. | The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps Ethernet ports designed and developed by FriendlyElec for IoT applications. The NanoPi R3S uses the RK3566 SoC. It has two Gbps Ethernet ports and 2G LPDDR4X RAM, as well as optional 32GB eMMC. The NanoPi R3S can be optionally equipped with an integrated CNC anodized aluminum case. |
| |
| /*****/ | CNX Software review: [[https://www.cnx-software.com/2024/08/28/nanopi-r3s-a-low-cost-rockchip-rk3566-sbc-and-dual-gigabit-ethernet-router/]] |
| /* How to add images ========> http://openwrt.org/meta/adding_images_to_openwrt_wiki */ | |
| /*****/ | |
| |
| {{media:example:genericrouter1.png?200|Generic Router}} | **Support Forum** https://forum.openwrt.org/t/openwrt-support-for-nanopi-r3s/212571 |
| |
| | {{media:nanopi-r3sc-front.jpg?250|Case front}} |
| | {{media:nanopi_r3s_top.jpg?250|Top}} |
| | {{media:nanopi_r3s-case1.jpg?250|Case}} |
| | {{media:nanopi-r3sc-02.jpg?250|Case back}} |
| | |
| | |
| | /* |
| <WRAP BOX> | <WRAP BOX> |
| FIXME | |
| ===== Getting started with a new Device Page ===== | |
| - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.** | |
| - There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness. | |
| - When there are no more "fixme" tags left, delete this one too, along with the ''<nowiki><WRAP></nowiki>'' that encloses it. | |
| |
| ===== Keep the articles modular ===== | ===== Keep the articles modular ===== |
| * Please include only model specific information, omit bla,bla and put everything generic into separate articles | * Please include only model specific information, omit bla,bla and put everything generic into separate articles |
| * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]]. | * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]]. |
| </WRAP> | </WRAP> |
| | |
| | */ |
| |
| ===== Supported Versions ===== | ===== Supported Versions ===== |
| |
| <WRAP BOX> | |
| FIXME | |
| - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** | |
| - If the tables below show information for ''<nowiki>FriendlyElec NanoPi R3S </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. | |
| - If the tables below contain "Nothing found", it means that either | |
| - the dataentry page for FriendlyElec NanoPi R3S is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. | |
| - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. | |
| - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. | |
| </WRAP> | |
| |
| <!-- ToH: { | <!-- ToH: { |
| "paging": false, | "paging": false, |
| "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"], | "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"], |
| "filterColumns": {"brand": "^FriendlyElec$", "model": "^NanoPi R3S$"} | "filterColumns": {"brand": "^FriendlyARM$", "model": "^NanoPi R3S$"} |
| } --> | } --> |
| |
| "paging": false, | "paging": false, |
| "shownColumns": ["unsupported_functions"], | "shownColumns": ["unsupported_functions"], |
| "filterColumns": {"brand": "^FriendlyElec$", "model": "^NanoPi R3S$", "version": "^@@Version\\|@@$"} | "filterColumns": {"brand": "^FriendlyARM$", "model": "^NanoPi R3S$", "version": "^@@Version\\|@@$"} |
| } --> | } --> |
| |
| "paging": false, | "paging": false, |
| "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "ethernet1gports", "usbports"], | "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "ethernet1gports", "usbports"], |
| "filterColumns": {"brand": "^FriendlyElec$", "model": "^NanoPi R3S$"} | "filterColumns": {"brand": "^FriendlyARM$", "model": "^NanoPi R3S$"} |
| } --> | } --> |
| |
| "paging": false, | "paging": false, |
| "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"], | "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"], |
| "filterColumns": {"brand": "^FriendlyElec$", "model": "^NanoPi R3S$", "version": "^@@Version\\|@@$"} | "filterColumns": {"brand": "^FriendlyARM$", "model": "^NanoPi R3S$", "version": "^@@Version\\|@@$"} |
| } --> | } --> |
| */ | */ |
| /* snapshot */ | /* snapshot */ |
| /* delete once stable release is available */ | /* delete once stable release is available */ |
| <!-- ToH: { | /* <!-- ToH: { |
| "source": "json", | "source": "json", |
| "dom": "t", | "dom": "t", |
| "paging": false, | "paging": false, |
| "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtsnapshotinstallurl", "firmwareopenwrtsnapshotupgradeurl", "firmwareoemstockurl"], | "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtsnapshotinstallurl", "firmwareopenwrtsnapshotupgradeurl", "firmwareoemstockurl"], |
| "filterColumns": {"brand": "^FriendlyElec$", "model": "^NanoPi R3S$", "version": "^@@Version\\|@@$"} | "filterColumns": {"brand": "^FriendlyARM$", "model": "^NanoPi R3S$", "version": "^@@Version\\|@@$"} |
| } --> | } --> |
| | */ |
| |
| | Installation - microSD: |
| |
| -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] | -Uncompress the OpenWRT sysupgrade.img.gz |
| | -Write image to microSD card using dd or similar tool |
| |
| FIXME Please add the installation procedure here. | Installation - eMMC: |
| |
| ==== Flash Layout ==== | -Boot from microSD |
| <WRAP BOX> | -Uncompress the OpenWRT sysupgrade.img.gz |
| FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).// | -Flash to eMMC : dd if=x.img of=/dev/mmcblk0 |
| | -sync |
| | -Remove microSD card |
| | -Reboot |
| |
| Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. | -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] |
| </WRAP> | |
| |
| ==== OEM easy installation ==== | |
| |
| <WRAP BOX> | |
| FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ | |
| **//Remove / modify them if they do not apply to this particular device!//** | |
| |
| This section deals with | |
| * How you install OpenWrt from a device freshly opened | |
| * The steps required such as reset to factory defaults if the device has already been configured | |
| |
| **Note:** Reset router to factory defaults if it has been previously configured. | |
| * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' | |
| * Upload .bin file to router | |
| * Wait for it to reboot | |
| * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. | |
| </WRAP> | |
| |
| ==== OEM installation using the TFTP method ==== | |
| |
| -> [[docs:guide-user:installation:generic.flashing.tftp]] | |
| |
| === Specific values needed for tftp === | |
| |
| <WRAP BOX> | |
| |
| FIXME Enter values for "FILL-IN" below | |
| |
| ^ Bootloader tftp server IPv4 address | FILL-IN | | |
| ^ Bootloader MAC address (special) | FILL-IN | | |
| ^ Firmware tftp image | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | | |
| ^ TFTP transfer window | FILL-IN seconds | | |
| ^ TFTP window start | approximately FILL-IN seconds after power on | | |
| ^ TFTP client required IP address | FILL-IN | | |
| |
| </WRAP> | |
| |
| ===== Upgrading OpenWrt ===== | ===== Upgrading OpenWrt ===== |
| template: meta:template_datatemplatelist | template: meta:template_datatemplatelist |
| cols : Brand, Model, Versions, Device Type, Availability, Supported Since Commit_git, Supported since Rel, Supported current Rel, Unsupported, Bootloader, CPU, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Hardwares, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Power supply, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_ | cols : Brand, Model, Versions, Device Type, Availability, Supported Since Commit_git, Supported since Rel, Supported current Rel, Unsupported, Bootloader, CPU, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Hardwares, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Power supply, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_ |
| filter : Brand=FriendlyElec | filter : Brand=FriendlyARM |
| filter : Model=NanoPi R3S | filter : Model=NanoPi R3S |
| filter : Versions= | filter : Versions= |
| ---- | ---- |
| |
| ==== Photos ==== | |
| /* =====>>>>> Standard size for photos: add ?400 to the medialink */ | |
| /* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */ | |
| /* e.g. {{:media:yourbrand:yourbrand_yourmodel_front.jpg?400|}} */ | |
| /* Thanks, your wiki administration - Oct. 2015 */ | |
| |
| //Front://\\ | |
| **Insert photo of front of the casing** | |
| |
| //Back://\\ | |
| **Insert photo of back of the casing** | |
| |
| //Backside label://\\ | |
| **Insert photo of backside label** | |
| |
| ==== Opening the case ==== | ==== Opening the case ==== |
| **Note:** This will void your warranty! | **Note:** This will void your warranty! |
| |
| <WRAP BOX> | There is a single black screw on the bottom panel of the case, likely covered by a FriendlyElec QC sticker if you purchased the case together. Once the bottom panel is removed, the PCB can be unsecured from the case by unscrewing three additional silver screws. |
| FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...// | |
| * To remove the cover and open the device, do a/b/c | |
| </WRAP> | |
| | |
| //Main PCB://\\ | |
| **Insert photo of PCB** | |
| |
| ==== Serial ==== | ==== Serial ==== |
| How to connect to the Serial Port of this specific device:\\ | How to connect to the Serial Port of this specific device:\\ |
| **Insert photo of PCB with markings for serial port** | **Insert photo of PCB with markings for serial port** |
| |
| <WRAP BOX> | |
| FIXME //Replace EXAMPLE by real values.// | |
| </WRAP> | |
| |
| ^ Serial connection parameters\\ for FriendlyElec NanoPi R3S | 3.3V, 1500000, 8N1, flow control none | | ^ Serial connection parameters\\ for FriendlyElec NanoPi R3S | 3.3V, 1500000, 8N1, flow control none | |
| |
| ==== JTAG ==== | |
| -> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc. | |
| |
| How to connect to the JTAG Port of this specific device:\\ | |
| **Insert photo of PCB with markings for JTAG port** | |
| |
| ===== Bootloader mods ===== | ===== Bootloader mods ===== |