Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:edimax:wap1750 [2022/01/31 21:03] – Small updates on failsafe / disassembly teppotoh:edimax:wap1750 [2022/01/31 23:10] – Intro teppo
Line 4: Line 4:
 It appears to be identical hardware, yet with newer firmware.  It appears to be identical hardware, yet with newer firmware. 
  
-/*****/ +Supported via hardware flashing. 19 and 21 tested.
-/* How to add images ========> https://openwrt.org/meta/adding_images_to_openwrt_wiki */ +
-/*****/+
  
-{{ media:example:genericrouter1.png?200|Generic Router}} +By default, only one ethernet port is working (WAN). This allows for use as an Access Point only. The device has 802.1af POE on WAN.
- +
- +
-===== OpenWrt support ===== +
- +
-Supported via hardware flashing, 19.07.4 stable release. +
- +
-http://downloads.openwrt.org/releases/19.07.4/targets/ath79/generic/openwrt-19.07.4-ath79-generic-devolo_dvl1750e-squashfs-sysupgrade.bin +
- +
-By default, only one ethernet port is working. This allows for use as an Access Point only.+
  
  
Line 28: Line 17:
  
  
-/*** if info available: uncomment and fill in 
-===== Experimental firmware ===== 
  
-//List experimental firmware download links here.// 
  
-//None at this time.// 
  
-  * External image (add link) 
-  * trunk image (add link) 
-  * ... 
-***/ 
  
 +===== Supported Versions =====
  
-===== Hardware highlights =====+---- datatable ---- 
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid 
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data 
 +align   : c,c,c,c,c,c,
 +filter  : Brand=Devolo 
 +filter  : Model=WiFi pro 1750e 
 +----
  
-/*** if info available: uncomment and fill in 
-===== Installation ===== 
-  - → [[:downloads|Obtain firmware]] 
-  - → [[docs:guide-user:installation:generic.flashing|Install OpenWrt]] 
-  - → [[:downloads|Latest OpenWrt release]] 
  
-==== Installing OpenWrt ==== +===== Hardware Highlights ===== 
-***/ +---- datatable ---- 
- +cols    ModelVersionsCPU, CPU MHzFlash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHzWLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
- +header  Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
-/*** if info available: uncomment and fill in +align   : c,c,c,c,c,c,c,c,c,c,c,c,c 
-===== Debricking ===== +filter  Brand=Devolo 
--> [[docs:guide-user:troubleshooting:generic.debrick]] +filter  : Model=WiFi pro 1750e 
-***/ +----
- +
- +
-/*** if info available: uncomment and fill in +
-===== Failsafe mode ===== +
--> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] +
-***/ +
- +
- +
-/*** if info available: uncomment and fill in +
-===== Basic configuration ===== +
-After flashing, proceed with [[docs:guide-user:base-system:start|Basic configuration]]: Set up your Internet connectionconfigure wirelessconfigure USB portetc. +
-***/ +
- +
- +
-/*** if info available: uncomment and fill in +
-===== Specific configuration ===== +
- +
-<WRAP BOX 600px> +
-FIXME Please fill in real values for this devicethen remove the EXAMPLEs and the WRAP that encloses this text+
- +
-==== Network interfaces ==== +
-The default network configuration is: +
-^ Interface Name   ^ Description                  ^ Default configuration    ^ +
-| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   | +
-| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | +
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | +
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | +
-</WRAP> +
-***/ +
- +
- +
-/*** if info availableuncomment and fill in +
-==== Buttons ==== +
--> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). +
-Herewe merely name the buttonsso we can use them in the above Howto. +
- +
-<WRAP BOX 600px> +
-FIXME Please fill in real values for this devicethen remove the EXAMPLEs and the WRAP that encloses this text. +
- +
-The Edimax WAP1750 has the following buttons+
- +
-^ BUTTON                       ^ Event   ^ +
-| EXAMPLE Reset                |  reset  | +
-| EXAMPLE Secure Easy Setup    |   ses   | +
-| EXAMPLE No buttons at all.      -    | +
-</WRAP> +
-***/ +
- +
- +
-===== Hardware ====+
-==== Info ==== +
-^ Architecture     | EXAMPLE MIPS                             | +
-^ Vendor           | EXAMPLE Ralink                           | +
-^ Bootloader       | EXAMPLE U-Boot                           | +
-^ System-On-Chip   | EXAMPLE Ralink RT3052 MIPS 24K V4.12   | +
-^ CPU/Speed        | EXAMPLE 451 MHz                          | +
-^ Flash-Chip       | EXAMPLE unkown                           | +
-^ Flash size       | EXAMPLE 8 MiB                            | +
-^ RAM              | EXAMPLE 64 MiB                           | +
-^ Wireless         | EXAMPLE RT2860v2 2.4GHz 802.11bgn        | +
-^ Ethernet         | EXAMPLE 10/100 Mbit/s w/ vlan support    | +
-^ Switch           | EXAMPLE Qualcomm Atheros QCA8337         | +
-^ USB              | EXAMPLE 1x 2.0                           | +
-^ Serial           | EXAMPLE [[#Serial|Yes]]                  | +
-^ JTAG             | EXAMPLE [[#JTAG|Not populated]]          |+
  
  
 +/***===== Hardware =====***/
 /*** if info available: uncomment and fill in /*** if info available: uncomment and fill in
 ==== Flash Layout ==== ==== Flash Layout ====
Line 168: Line 87:
 If properly connected to the flash chip, flashrom will detect one of two possible chips, and prompt for the correct one. At that point, you should be able to read the chip. Read it multiple times, and verify they are identical with md5sum. If you get unreliable readings, make sure cables to RPI from breakout board are short as possible. Soldering experience may be required. Experience with flashrom may be required. If properly connected to the flash chip, flashrom will detect one of two possible chips, and prompt for the correct one. At that point, you should be able to read the chip. Read it multiple times, and verify they are identical with md5sum. If you get unreliable readings, make sure cables to RPI from breakout board are short as possible. Soldering experience may be required. Experience with flashrom may be required.
  
 +Since this device has only 1 working ethernet port, you will probably want to configure it to be WAN after logging in and confirming everything works. Here's a config for 21.02 illustrating this:
 +
 +<code>
 +config interface 'loopback'
 +        option device 'lo'
 +        option proto 'static'
 +        option ipaddr '127.0.0.1'
 +        option netmask '255.0.0.0'
 +
 +config globals 'globals'
 +        option ula_prefix 'fdd8:dd71:9ca7::/48'
 +
 +config device
 +        option name 'br-lan'
 +        option type 'bridge'
 +#       list ports 'eth0' #note that eth0 is removed from lan ports.
 +        list ports 'eth1'
 +
 +config interface 'lan'
 +        option device 'br-lan'
 +        option proto 'static'
 +        option ipaddr '192.168.2.1'
 +        option netmask '255.255.255.0'
 +        option ip6assign '60'
 +
 +config device
 +        option name 'eth0'
 +        option macaddr 'yourmacaddr'
 +#per changes on notes 21.02 highlights page which
 +#explains that ifname is now name in device and some other quirks.
 +#note that list ports is only for bridge type. here you just specify name with ifname...
 +
 +config interface 'wan'
 +        option device 'eth0'
 +        option proto 'dhcp'
 +
 +</code>
  
  
Line 209: Line 165:
  
 ==== Failsafe ==== ==== Failsafe ====
-Once openwrt is installed, you can press the reset button while the device is booting. Watching the serial output, the button can be pressed when it asks for failsafe mode.+Once openwrt is installed, you can press the reset button while the device is booting. Watching the serial output, the button can be pressed when it asks for failsafe mode. Connect to the WAN port, and configure an ip in the 192.168.1.0/24 subnet to connect to the WAP at 192.168.1.1.
  
  
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1