Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision | ||
| toh:edimax:ns-1500n [2011/03/16 22:49] – sordfish | toh:edimax:ns-1500n [2015/11/30 21:14] – [[meta:tags]] -> [[meta:tags|How to add tags]] tmomas | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ===== Edimax NS-1500N ===== | ||
| + | Tested with a modified fonera 2.0n openwrt firmware image. | ||
| + | |||
| + | Usb, wifi, lan, all seem to work. | ||
| + | |||
| + | |||
| + | It uses the Ralink RT3050 SoC, wifi drivers are binary and only work with 2.6.21 kernel, so don't expect latest trunk to be stable for while yet. | ||
| + | |||
| + | ==== Hardware Highlights ==== | ||
| + | ^ CPU ^ Ram ^ Flash ^ Network ^ USB ^ Serial ^ JTAG ^ | ||
| + | | RT3050F | 32MB | 8MB | 1 | Yes | Yes | No | | ||
| + | |||
| + | ===== Installation ===== | ||
| + | |||
| + | This is more of an FYI than a guide as its very ghetto and could potential brick your device YOU HAVE BEEN WARNED. | ||
| + | |||
| + | I recommend backing up your firmware if you do attempt flashing as there are no recovery images available. | ||
| + | |||
| + | |||
| + | I've only tested installing firmware via serial. | ||
| + | |||
| + | Pressing 2 while Uboot starts lets you flash an image via tftp. | ||
| + | |||
| + | I used the fonera 2.0n build system to produce a fon/openwrt firware. | ||
| + | |||
| + | The only requirements to get it to boot is editing the kernel config for 32mb RAM and the RT3050. | ||
| + | |||
| + | | ||
| + | |||
| + | |||
| + | ====== Serial Port JP2 ====== | ||
| + | |||
| + | ^ Pin 1 | +3.3 V | | ||
| + | ^ Pin 2 | RX | | ||
| + | ^ Pin 3 | GND | ||
| + | ^ Pin 4 | TX | | ||
| + | |||
| + | |||
| + | Used a Nokia CA-42 datacable to connect, but had to add a 1K resistor between RX and 3.3V. | ||
| + | Default speed 57600,8N1 | ||
| + | |||
| + | ==== Details ==== | ||
| + | |||
| + | ^ Architecture: | ||
| + | ^ Vendor: | ||
| + | ^ Bootloader: | ||
| + | ^ System-On-Chip: | ||
| + | ^ CPU Speed: | ||
| + | ^ Flash-Chip: | ||
| + | ^ Flash size: | 8MiB | | ||
| + | ^ RAM: | 32MiB | | ||
| + | ^ Wireless: | ||
| + | ^ Ethernet: | ||
| + | ^ USB: | Yes | | ||
| + | ^ Serial: | ||
| + | ^ JTAG: | No | | ||
| + | |||
| + | ====== Similar Devices ====== | ||
| + | MiniEMBWiFi available at [[http:// | ||
| + | |||
| + | - MiniEMBWiFi board has the serial port taken to a 4 pin 2.54mm pitch pinheader as standard | ||
| + | |||
| + | - USB to serial JP2 pinheader cable is provided as an optional accessory | ||
| + | |||
| + | - There are two plastic cases available for MiniEMBWiFi: | ||
| + | Baige color case - for those who like a reto-80s look and feel, and a | ||
| + | White color case with rounded edges - an up to date modern design | ||
| + | |||
| + | - [[http:// | ||
| + | |||
| + | ===== Tags ===== | ||
| + | [[meta: | ||
| + | |||
| + | {{tag> | ||