Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:edimax:3g-6200n [2019/02/12 21:22] – 432 warning added tmomastoh:edimax:3g-6200n [2023/09/26 19:51] – [Hardware Highlights] wirelessfreedom
Line 28: Line 28:
 header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 align   : c,c,c,c,c,c,c,c,c,c,c,c,c align   : c,c,c,c,c,c,c,c,c,c,c,c,c
-filter  : Model*~3G-6200N+filter  : Model*~R*21S
 ---- ----
  
Line 63: Line 63:
  
 ==== Notes ==== ==== Notes ====
-  - In case of problems it should be possible to flash back to original firmware via tftp firmware restore method. +In case of problems it should be possible to flash back to original firmware via tftp firmware restore method. 
-  Unplug power from Edimax +  Unplug power from Edimax 
-  Press Wps/Reset button, and hold it while plugging in power +  Press Wps/Reset button, and hold it while plugging in power 
-  Manually set IP address on your PC. +  Manually set IP address on your PC.\\ <code bash>
-  <code bash>+
   IP Address: 192.168.1.2   IP Address: 192.168.1.2
   Netmask: 255.255.255.0   Netmask: 255.255.255.0
   Gateway: 192.168.1.1   Gateway: 192.168.1.1
-  </code> +</code> 
-  download tftp utility [[http://philippe.jounin.pagesperso-orange.fr/tftpd32.html]], and send original firmware file to **192.168.1.6 +  download tftp utility [[http://philippe.jounin.pagesperso-orange.fr/tftpd32.html]], and send original firmware file to **192.168.1.6**
-**+
     * make sure you use binary mode (using text mode may result in infinite slow flashing of wifi led)     * make sure you use binary mode (using text mode may result in infinite slow flashing of wifi led)
     * perhaps waiting 5-10 minutes after firmware upload would be sufficient for it to flash     * perhaps waiting 5-10 minutes after firmware upload would be sufficient for it to flash
-    * after flash you may see your settings from prior OpenWrt installation restored+  - after flash you may see your settings from prior OpenWrt installation restored
  
 ===== Hardware ===== ===== Hardware =====
Line 85: Line 83:
 ^ System-On-Chip   | RT3050F           | ^ System-On-Chip   | RT3050F           |
 ^ CPU Speed        | 320MHz            | ^ CPU Speed        | 320MHz            |
-^ Flash-Chip       ?                 |+^ Flash-Chip       MX29LV320T        |
 ^ Flash size       | 4MiB              | ^ Flash size       | 4MiB              |
 ^ RAM              | 32MiB             | ^ RAM              | 32MiB             |
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1