Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:edimax:3g-6200n [2018/04/02 19:44] – Request for confirmation of support removed; datatables added tmomastoh:edimax:3g-6200n [2023/09/26 19:51] – [Hardware Highlights] wirelessfreedom
Line 1: Line 1:
-===== Edimax 3G-6200N =====+====== Edimax 3G-6200N =====
 + 
 +{{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
  
 ===== Supported Versions ===== ===== Supported Versions =====
Line 26: Line 28:
 header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 align   : c,c,c,c,c,c,c,c,c,c,c,c,c align   : c,c,c,c,c,c,c,c,c,c,c,c,c
-filter  : Model*~3G-6200N+filter  : Model*~R*21S
 ---- ----
  
-**Serial** 
-^ BAUD RATE   ^ BITS   ^ PARITY   ^ FLOW CONTROL   ^ 
-| 57600       | 8      | N        | none           | 
- 
-{{:media:edimax:3g-6200n_serial_01.jpg?400}} 
-{{:media:edimax:3g-6200n_serial_02.jpg?400}} 
  
 ===== Installation ===== ===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : c,c,c
 +filter  : Model*~3G-6200N
 +----
 +
 +-> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
 +
  
 **''NOTE:''** This method was tested on firmware 2.21b available at [[http://edimax.pl/images/Image/Firmware/Router/3G-6200n/NFR_3G6200N_EdimaxOBM_EZ_2.21b_upg.zip|Edimax Poland]]: **''NOTE:''** This method was tested on firmware 2.21b available at [[http://edimax.pl/images/Image/Firmware/Router/3G-6200n/NFR_3G6200N_EdimaxOBM_EZ_2.21b_upg.zip|Edimax Poland]]:
   - Enable telnet server   - Enable telnet server
-     * Log in to www interface, lets assume it is at address http://router +     * Log in to www interface, lets assume it is at address ''%%http://router%%'' 
-     * In address bar go to hidden sub-page: http://router/syscmd.asp+     * In address bar go to hidden sub-page: ''%%http://router/syscmd.asp%%''
      * In input box enter: <code>/usr/sbin/telnetd -l /bin/ash</code>      * In input box enter: <code>/usr/sbin/telnetd -l /bin/ash</code>
      * Test if telnet server is working: telnet to the router      * Test if telnet server is working: telnet to the router
      * Note: this hack may not work on all firmware versions, I have tested it successfully on 2.21b. (Does **not** work on 2.22f, 2.24g and 2.26c: A link to busybox exists, but busybox was compiled without this plugin).      * Note: this hack may not work on all firmware versions, I have tested it successfully on 2.21b. (Does **not** work on 2.22f, 2.24g and 2.26c: A link to busybox exists, but busybox was compiled without this plugin).
    - Download flash files to router and start flashing process    - Download flash files to router and start flashing process
-     * Statically compiled "mtd" programm can be downloaded from this link http://dl.dropbox.com/u/7157357/My-files/mtd +     * Statically compiled "mtd" programm can be downloaded from this link [[http://dl.dropbox.com/u/7157357/My-files/mtd]] 
-     * Firmware file available here http://dl.dropbox.com/u/7157357/My-files/openwrt-ramips-rt305x-3g-6200n-squashfs-sysupgrade.bin+     * Firmware file available here [[http://dl.dropbox.com/u/7157357/My-files/openwrt-ramips-rt305x-3g-6200n-squashfs-sysupgrade.bin]]
      * <code bash>      * <code bash>
 cd /tmp cd /tmp
Line 58: Line 63:
  
 ==== Notes ==== ==== Notes ====
-  - In case of problems it should be possible to flash back to original firmware via tftp firmware restore method. +In case of problems it should be possible to flash back to original firmware via tftp firmware restore method. 
-  Unplug power from Edimax +  Unplug power from Edimax 
-  Press Wps/Reset button, and hold it while plugging in power +  Press Wps/Reset button, and hold it while plugging in power 
-  Manually set IP address on your PC. +  Manually set IP address on your PC.\\ <code bash>
-  <code bash>+
   IP Address: 192.168.1.2   IP Address: 192.168.1.2
   Netmask: 255.255.255.0   Netmask: 255.255.255.0
   Gateway: 192.168.1.1   Gateway: 192.168.1.1
-  </code> +</code> 
-  download tftp utility [[http://philippe.jounin.pagesperso-orange.fr/tftpd32.html]], and send original firmware file to **192.168.1.6 +  download tftp utility [[http://philippe.jounin.pagesperso-orange.fr/tftpd32.html]], and send original firmware file to **192.168.1.6**
-**+
     * make sure you use binary mode (using text mode may result in infinite slow flashing of wifi led)     * make sure you use binary mode (using text mode may result in infinite slow flashing of wifi led)
     * perhaps waiting 5-10 minutes after firmware upload would be sufficient for it to flash     * perhaps waiting 5-10 minutes after firmware upload would be sufficient for it to flash
-    * after flash you may see your settings from prior OpenWrt installation restored+  - after flash you may see your settings from prior OpenWrt installation restored
  
 +===== Hardware =====
 ==== Details ==== ==== Details ====
-^ Architecture    | RAMIPS            | +^ Architecture     | RAMIPS            | 
-^ Vendor          | RALINK            | +^ Vendor           | RALINK            | 
-^ Bootloader      | U-Boot            | +^ Bootloader       | U-Boot            | 
-^ System-On-Chip  | RT3050F           | +^ System-On-Chip   | RT3050F           | 
-^ CPU Speed       | 320MHz            | +^ CPU Speed        | 320MHz            | 
-^ Flash-Chip      | ?                 +^ Flash-Chip       MX29LV320T        
-^ Flash size      | 4MiB              | +^ Flash size       | 4MiB              | 
-^ RAM             | 32MiB             | +^ RAM              | 32MiB             | 
-^ Wireless        | 802.11n (B/G/N)   | +^ Wireless         | 802.11n (B/G/N)   | 
-^ Ethernet        | 10/100            | +^ Ethernet         | 10/100            | 
-^ USB             | Yes               | +^ USB              | Yes               | 
-^ Serial          | Yes               | +^ Serial           | Yes               | 
-^ JTAG            | No                |+^ JTAG             | No                |
  
 +==== Serial ====
 +^ BAUD RATE   ^ BITS   ^ PARITY   ^ FLOW CONTROL   ^
 +| 57600       | 8      | N        | none           |
 +
 +{{:media:edimax:3g-6200n_serial_01.jpg?400}}
 +{{:media:edimax:3g-6200n_serial_02.jpg?400}}
  
 ===== Buttons ===== ===== Buttons =====
Line 143: Line 153:
   * Failsafe not working...WIP   * Failsafe not working...WIP
   * Find the way to flash the openwrt firmware from original edimax web interface    * Find the way to flash the openwrt firmware from original edimax web interface 
-  * multi-ssid: ap only might work, for sta/ap setup perhaps https://dev.openwrt.org/ticket/12133+  * multi-ssid: ap only might work, for sta/ap setup perhaps [[https://dev.openwrt.org/ticket/12133]]
  
 ===== Links ===== ===== Links =====
 Polish forum openrouter.info from which this device was hacked by Ahajda and Lgolebio users. Polish forum openrouter.info from which this device was hacked by Ahajda and Lgolebio users.
-  * http://openrouter.info/forum/viewtopic.php?f=22&t=320+  * [[http://openrouter.info/forum/viewtopic.php?f=22&t=320]]
  
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
 {{tag>ramips rt3050 4flash 32ram}} {{tag>ramips rt3050 4flash 32ram}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1