Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:dragino:lps8 [2021/07/29 10:14] – [Flash Layout] rogerpueyotoh:dragino:lps8 [2021/07/29 10:15] – [OEM easy installation] rogerpueyo
Line 45: Line 45:
  
 ==== Flash Layout ==== ==== Flash Layout ====
-This are the partitions in OpenWrt 18.06 according to /proc/mtd:+These are the partitions in OpenWrt 18.06 according to /proc/mtd:
 <code> <code>
 dev:    size   erasesize  name dev:    size   erasesize  name
Line 59: Line 59:
  
 ==== OEM easy installation ==== ==== OEM easy installation ====
- +OEM firmware is a modified OpenWrt.
-<WRAP BOX> +
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ +
-**//Remove / modify them if they do not apply to this particular device!//** +
- +
-This section deals with +
-  * How you install OpenWrt from a device freshly opened +
-  * The steps required such as reset to factory defaults if the device has already been configured +
- +
-**Note:** Reset router to factory defaults if it has been previously configured. +
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' +
-  * Upload .bin file to router +
-  * Wait for it to reboot +
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. +
-</WRAP> +
 ==== OEM installation using the TFTP method ==== ==== OEM installation using the TFTP method ====
  
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1