Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
toh:dragino:dragino_lps8 [2020/11/10 15:52] – [Dragino LPS8] rogerpueyotoh:dragino:lps8 [2024/02/12 11:13] (current) – external edit 127.0.0.1
Line 7: Line 7:
 The [[https://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html|Dragino LPS8]] is an open source [[wp>LoRa#LoRaWAN|LoRaWAN]] gateway based on the AR9331 SoC to bridge a LoRa wireless network to an IP network via WiFi or Ethernet. It has one 10/100 Mbps RJ45 Ethernet port, one 2.4 GHz 802.11bgn radio and one USB host port. It is powered via a USB type C connector. The [[https://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html|Dragino LPS8]] is an open source [[wp>LoRa#LoRaWAN|LoRaWAN]] gateway based on the AR9331 SoC to bridge a LoRa wireless network to an IP network via WiFi or Ethernet. It has one 10/100 Mbps RJ45 Ethernet port, one 2.4 GHz 802.11bgn radio and one USB host port. It is powered via a USB type C connector.
  
-{{:media:dragino:dragino_lps8_front.jpg?200 | Dragino LPS8 front view }} {{:media:dragino:dragino_lps8_rear.jpg?200 | Dragino LPS8 rear view }} +{{:media:dragino:dragino_lps8_front.jpg?300|Dragino LPS8 front view}}
-{{:media:dragino:dragino_lps8_bottom.jpg?200 |Dragino LPS8 bottom view}} {{:media:dragino:dragino_lps8_board_front.jpg?200 |Dragino LPS8 board front view}} +
-{{:media:dragino:dragino_lps8_board_top.jpg?200 |Dragino LPS8 board top view}} {{:media:dragino:dragino_lps8_board_detail.jpg?200|Dragino LPS8 board detail view}}+
  
 ===== Supported Versions ===== ===== Supported Versions =====
 +<!-- ToH: {
 +  "source": "json",
 +  "dom": "t",
 +  "paging": false,
 +  "rotate": true,
 +  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],
 +  "filterColumns": {"brand": "^Dragino$", "model": "^LPS8$"}
 +} -->
  
-<WRAP BOX> 
-FIXME 
-  - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If the tables below show information for ''<nowiki>Dragino LPS8 </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables below contain "Nothing found", it means that either 
-    - the dataentry page for Dragino LPS8  is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-    - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter  : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
- 
----- datatable ---- 
-cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Search_search-forums, Device Techdata_pageid 
-headers : Brand, Model, Version, Current Release, OEM Info, Forum Search, Technical Data 
-align   : c,c,c,c,c,c,c 
-filter  : Brand=Dragino 
-filter  : Model=LPS8 
-filter  : Versions~ 
----- 
- 
----- datatable ---- 
-cols    : Unsupported Functions_unsupporteds 
-filter  : Brand=Dragino 
-filter  : Model=LPS8 
-filter  : Versions~ 
----- 
- 
-===== Experimental Versions ===== 
- 
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  
-   The official Table of Hardware only lists current, stable versions of OpenWrt.  * 
-   Use this space to describe any on-going efforts to create a newer version       * 
-   of the firmware for this device. Provide links to firmware images,              * 
-   active threads on the forum, or other sources of information.                   * 
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ 
- 
-//None at this time.// 
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsCPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, ModemUSB ports_ +  "source""json", 
-header  : ModelVersion,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB +  "dom": "t", 
-align   c,c,c,c,c,c,c,c,c,c,c,c,c +  "paging": false
-filter  : Brand=Dragino +  "rotate"true
-filter  Model=LPS8 +  "shownColumns"["model""version""cpu""cpumhz""flashmb""rammb""wlanhardware""wlan24ghz""wlan50ghz""ethernet100mports""ethernet1gports""modem", "usbports"]
-filter  : Versions~ +  "filterColumns": {"brand""^Dragino$", "model""^LPS8$"} 
-----+-->
  
  
 ===== Installation ===== ===== Installation =====
 /* stable release */ /* stable release */
-/* uncomment once stable release is available +<!-- ToH{ 
----- datatable ---- +  "source""json"
-cols    Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url +  "dom""t"
-headers ModelVersion, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock +  "paging"false, 
-align   c,c,c +  "rotate"true, 
-filter  : Brand=Dragino +  "shownColumns"["model""version""supportedcurrentrel""firmwareopenwrtinstallurl""firmwareopenwrtupgradeurl""firmwareoemstockurl"]
-filter  : Model=LPS8 +  "filterColumns"{"brand""^Dragino$", "model""^LPS8$"} 
-filter  : Versions~ +-->
----- +
-*/ +
- +
- +
-/* snapshot */ +
-/* delete once stable release is available */ +
----- datatable ---- +
-cols    : ModelVersionsSupported Current RelFirmware OpenWrt snapshot Install URL_urlFirmware OpenWrt snapshot Upgrade URL_urlFirmware OEM Stock URL_url +
-headers : ModelVersion, Current Release, Firmware OpenWrt snapshot Install, Firmware OpenWrt snapshot Upgrade, Firmware OEM Stock +
-align   c,c,c +
-filter  Brand=Dragino +
-filter  Model=LPS8 +
-filter  : Versions~ +
-----+
  
  
 -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
  
-FIXME Please add the installation procedure here.+The device comes with an OpenWrt fork maintained by Dragino. The source code is available at [[https://github.com/dragino/openwrt_lede-18.06|GitHub]].
  
 ==== Flash Layout ==== ==== Flash Layout ====
-<WRAP BOX+These are the partitions in OpenWrt 18.06 according to /proc/mtd: 
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).//+<code
 +dev   size   erasesize  name 
 +mtd000040000 00010000 "u-boot" 
 +mtd100fa0000 00010000 "firmware" 
 +mtd200160000 00010000 "kernel" 
 +mtd300e40000 00010000 "rootfs" 
 +mtd4: 005a0000 00010000 "rootfs_data" 
 +mtd5: 00010000 00010000 "config" 
 +mtd6: 00010000 00010000 "art" 
 +</code>
  
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. 
-</WRAP> 
  
 ==== OEM easy installation ==== ==== OEM easy installation ====
- +OEM firmware is a modified OpenWrt.
-<WRAP BOX> +
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ +
-**//Remove / modify them if they do not apply to this particular device!//** +
- +
-This section deals with +
-  * How you install OpenWrt from a device freshly opened +
-  * The steps required such as reset to factory defaults if the device has already been configured +
- +
-**Note:** Reset router to factory defaults if it has been previously configured. +
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' +
-  * Upload .bin file to router +
-  * Wait for it to reboot +
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. +
-</WRAP> +
- +
-==== OEM installation using the TFTP method ==== +
- +
-->  [[docs:guide-user:installation:generic.flashing.tftp]] +
- +
-=== Specific values needed for tftp === +
- +
-<WRAP BOX> +
- +
-FIXME Enter values for "FILL-IN" below +
- +
-^ Bootloader tftp server IPv4 address  | FILL-IN   | +
-^ Bootloader MAC address (special)     | FILL-IN   | +
-^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | +
-^ TFTP transfer window                 | FILL-IN seconds                                | +
-^ TFTP window start                    | approximately FILL-IN seconds after power on   | +
-^ TFTP client required IP address      | FILL-IN                                        | +
- +
-</WRAP>+
  
 ===== Upgrading OpenWrt ===== ===== Upgrading OpenWrt =====
Line 238: Line 168:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-<WRAP BOX> +<!-ToH: { 
-FIXME +  "source": "json", 
-  This table is automatically generated, **once the correct filters for Brand and Model are set.** +  "dom": "t"
-  - If you see "Nothing.instead of a tableplease **edit this section and adjust the filters with the proper Brand and Model.** Just try, it's easy. +  "paging": false
-  - If you still don'see a table hereor a table filled with '¿': [[toh:start|Is there already a Techdata page available]] for Dragino LPS8 ? If not: [[meta:create_new_dataentry_page|Create one]]. +  "rotate"true
-  - If you see a table with the desired device dataeverything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. +  "shownColumns"["brand""model""version""devicetype""availability""supportedsincecommit""supportedsincerel""supportedcurrentrel""unsupported_functions""bootloader""cpu""target""cpumhz""flashmb""rammb""switch""ethernet100mports""ethernet1gports""commentsnetworkports""modem""vlan""wlan24ghz""wlan50ghz""wlanhardware""wlancomments""detachableantennas""usbports""sataports""commentsusbsataports""serial""jtag""ledcount""buttoncount""powersupply""deviceid""owrt_forum_topic_url""wikideviurl""oemdevicehomepageurl""firmwareoemstockurl""firmwareopenwrtinstallurl""firmwareopenwrtupgradeurl", "comments"]
-  - If it still doesn't workDon't paniccalm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. +  "filterColumns"{"brand": "^Dragino$", "model""^LPS8$"} 
-</WRAP> +-->
- +
----- datatemplatelist dttpllist ---- +
-template: meta:template_datatemplatelist +
-cols    : BrandModelVersionsDevice TypeAvailabilitySupported Since Commit_gitSupported since RelSupported current RelUnsupportedBootloaderCPUTargetCPU MHzFlash MBsRAM MBSwitchEthernet 100M ports_Ethernet Gbit ports_Comments network ports_ModemVLANWLAN 2.4GHzWLAN 5.0GHzWLAN HardwaresWLAN Comments_Detachable Antennas_USB ports_SATA ports_Comments USB SATA ports_SerialJTAGLED countButton countPower supplyDevice Techdata_pageidForum topic URL_urlwikidevi URL_urlOEM Device Homepage URL_urlFirmware OEM Stock URL_urlFirmware OpenWrt Install URL_urlFirmware OpenWrt Upgrade URL_urlComments_ +
-filter  : Brand=Dragino +
-filter  Model=LPS8 +
-filter  : Versions= +
-----+
  
 ==== Photos ==== ==== Photos ====
Line 261: Line 183:
 /* Thanks, your wiki administration - Oct. 2015 */ /* Thanks, your wiki administration - Oct. 2015 */
  
-//Front://\\ +{{:media:dragino:dragino_lps8_front.jpg?200|Dragino LPS8 front view}} 
-**Insert photo of front of the casing**+{{:media:dragino:dragino_lps8_rear.jpg?200|Dragino LPS8 rear view}} 
 +{{:media:dragino:dragino_lps8_bottom.jpg?200|Dragino LPS8 bottom view}} 
 +{{:media:dragino:dragino_lps8_board_front.jpg?200|Dragino LPS8 board front view}} 
 +{{:media:dragino:dragino_lps8_board_top.jpg?200|Dragino LPS8 board top view}} 
 +{{:media:dragino:dragino_lps8_board_detail.jpg?200|Dragino LPS8 board detail view}}
  
-//Back://\\ 
-**Insert photo of back of the casing** 
- 
-//Backside label://\\ 
-**Insert photo of backside label** 
  
 ==== Opening the case ==== ==== Opening the case ====
Line 311: Line 232:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki>Starting kernel... 
 + 
 +Linux version 4.9.109 (root@DraginoHK) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7360-e15565a) ) #0 Fri Jun 29 16:58:53 2018 
 +bootconsole [early0] enabled 
 +CPU0 revision is: 00019374 (MIPS 24Kc) 
 +SoC: Atheros AR9330 rev 1 
 +Determined physical RAM map: 
 + memory: 04000000 @ 00000000 (usable) 
 +Initrd not found or empty - disabling initrd 
 +Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +Zone ranges: 
 +  Normal   [mem 0x0000000000000000-0x0000000003ffffff] 
 +Movable zone start for each node 
 +Early memory node ranges 
 +  node   0: [mem 0x0000000000000000-0x0000000003ffffff] 
 +Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256 
 +Kernel command line:  board=DRAGINO2 console=ttyATH0,115200 mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config),64k(art)ro rootfstype=squashfs noinitrd 
 +PID hash table entries: 256 (order: -2, 1024 bytes) 
 +Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +Writing ErrCtl register=00000000 
 +Readback ErrCtl register=00000000 
 +Memory: 59900K/65536K available (3150K kernel code, 169K rwdata, 796K rodata, 292K init, 209K bss, 5636K reserved, 0K cma-reserved) 
 +SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +NR_IRQS:51 
 +Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz 
 +clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns 
 +sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns 
 +Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) 
 +pid_max: default: 32768 minimum: 301 
 +Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +futex hash table entries: 256 (order: -1, 3072 bytes) 
 +NET: Registered protocol family 16 
 +MIPS: machine is Dragino Dragino v2 
 +clocksource: Switched to clocksource MIPS 
 +NET: Registered protocol family 2 
 +TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP: Hash tables configured (established 1024 bind 1024) 
 +UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +NET: Registered protocol family 1 
 +Crashlog allocated RAM at address 0x3f00000 
 +workingset: timestamp_bits=30 max_order=14 bucket_order=0 
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +io scheduler noop registered 
 +io scheduler deadline registered (default) 
 +Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART 
 +console [ttyATH0] enabled 
 +console [ttyATH0] enabled 
 +bootconsole [early0] disabled 
 +bootconsole [early0] disabled 
 +m25p80 spi0.0: found w25q128, expected m25p80 
 +m25p80 spi0.0: w25q128 (16384 Kbytes) 
 +4 cmdlinepart partitions found on MTD device spi0.0 
 +Creating 4 MTD partitions on "spi0.0": 
 +0x000000000000-0x000000040000 : "u-boot" 
 +0x000000040000-0x000000fe0000 : "firmware" 
 +2 uimage-fw partitions found on MTD device firmware 
 +0x000000040000-0x0000001a0000 : "kernel" 
 +0x0000001a0000-0x000000fe0000 : "rootfs" 
 +mtd: device 3 (rootfs) set to be root filesystem 
 +1 squashfs-split partitions found on MTD device rootfs 
 +0x000000920000-0x000000fe0000 : "rootfs_data" 
 +0x000000fe0000-0x000000ff0000 : "config" 
 +0x000000ff0000-0x000001000000 : "art" 
 +libphy: Fixed MDIO Bus: probed 
 +libphy: ag71xx_mdio: probed 
 +ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch 
 +eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII 
 +ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] 
 +eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII 
 +NET: Registered protocol family 10 
 +NET: Registered protocol family 17 
 +8021q: 802.1Q VLAN Support v1.8 
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:3. 
 +Freeing unused kernel memory: 292K 
 +This architecture does not have kernel memory protection. 
 +random: fast init done 
 +init: Console is alive 
 +init: - watchdog - 
 +kmodloader: loading kernel modules from /etc/modules-boot.d/
 +usbcore: registered new interface driver usbfs 
 +usbcore: registered new interface driver hub 
 +usbcore: registered new device driver usb 
 +ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
 +SCSI subsystem initialized 
 +ehci-platform: EHCI generic platform driver 
 +ehci-platform ehci-platform: EHCI Host Controller 
 +ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 
 +ehci-platform ehci-platform: irq 3, io mem 0x1b000000 
 +ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 
 +hub 1-0:1.0: USB hub found 
 +hub 1-0:1.0: 1 port detected 
 +watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). 
 +watchdog: Software Watchdog: a legacy watchdog module is probably present. 
 +softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) 
 +ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
 +ohci-platform: OHCI generic platform driver 
 +uhci_hcd: USB Universal Host Controller Interface driver 
 +usbcore: registered new interface driver usb-storage 
 +input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0 
 +kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +init: - preinit - 
 +usb 1-1: new high-speed USB device number 2 using ehci-platform 
 +random: procd: uninitialized urandom read (4 bytes read) 
 +hub 1-1:1.0: USB hub found 
 +hub 1-1:1.0: 4 ports detected 
 +IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
 +mount_root: loading kmods from internal overlay 
 +kmodloader: loading kernel modules from //etc/modules-boot.d/
 +kmodloader: done loading kernel modules from //etc/modules-boot.d/
 +jffs2: notice: (394) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. 
 +block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab 
 +block: extroot: not configured 
 +jffs2: notice: (392) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. 
 +block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab 
 +block: extroot: not configured 
 +mount_root: switching to jffs2 overlay 
 +urandom-seed: Seeding with /etc/urandom.seed 
 +procd: - early - 
 +procd: - watchdog - 
 +procd: - watchdog - 
 +procd: - ubus - 
 +random: ubusd: uninitialized urandom read (4 bytes read) 
 +random: jshn: uninitialized urandom read (4 bytes read) 
 +random: ubusd: uninitialized urandom read (4 bytes read) 
 +Command failed: Not found 
 +procd: - init - 
 +Please press Enter to activate this console. 
 +kmodloader: loading kernel modules from /etc/modules.d/
 +ntfs: driver 2.1.32 [Flags: R/O MODULE]. 
 +loop: module loaded 
 +ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +Netfilter messages via NETLINK v0.30. 
 +ip_set: protocol 6 
 +i2c /dev entries driver 
 +u32 classifier 
 +    input device check on 
 +    Actions configured 
 +Mirror/redirect action on 
 +Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 
 +Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d 
 +ip_tables: (C) 2000-2006 Netfilter Core Team 
 +nf_conntrack version 0.5.0 (1024 buckets, 4096 max) 
 +nf_conntrack_rtsp v0.7 loading 
 +nf_nat_rtsp v0.7 loading 
 +usbcore: registered new interface driver usbserial 
 +usbcore: registered new interface driver usbserial_generic 
 +usbserial: USB Serial support registered for generic 
 +xt_time: kernel timezone is -0000 
 +usbcore: registered new interface driver ftdi_sio 
 +usbserial: USB Serial support registered for FTDI USB Serial Device 
 +PPP generic driver version 2.4.2 
 +NET: Registered protocol family 24 
 +usbcore: registered new interface driver option 
 +usbserial: USB Serial support registered for GSM modem (1-port) 
 +usbcore: registered new interface driver qcserial 
 +usbserial: USB Serial support registered for Qualcomm USB modem 
 +ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 
 +kmodloader: done loading kernel modules from /etc/modules.d/
 +input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input1 
 +Custom GPIO-based SPI driver version 0.1 
 +br-lan: port 1(eth0) entered blocking state 
 +br-lan: port 1(eth0) entered disabled state 
 +device eth0 entered promiscuous mode 
 +IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready 
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready 
 +eth1: link up (100Mbps/Full duplex) 
 +IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready 
 +Custom GPIO-based SPI driver version 0.1 
 +IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 
 +br-lan: port 2(wlan0) entered blocking state 
 +br-lan: port 2(wlan0) entered disabled state 
 +device wlan0 entered promiscuous mode 
 +IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 
 +br-lan: port 2(wlan0) entered blocking state 
 +br-lan: port 2(wlan0) entered forwarding state 
 +IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +Custom GPIO-based SPI driver version 0.1 
 + 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1