Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:d-link:dva-g3810bn-tl [2018/06/17 07:55] – Datatables added tmomastoh:d-link:dva-g3810bn-tl [2019/02/12 21:26] – 432 warning added tmomas
Line 1: Line 1:
 ====== D-Link DVA-G3810BN/TL ====== ====== D-Link DVA-G3810BN/TL ======
 +
 +{{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
  
 This page had not been modified for over two years. As the pre-existing information (following the heading 'Information Below is Pre-2013') is quite detailed and makes a good reference, a few more recent details will be added to the top here (the rest will be left unaltered). The router I have lists a different cpu when ssh'ing into it. The dead firmware download link in the 'Installation' paragraph is for an old version of OpenWrt (10.03). For more current firmware, see the 'Downloads' headings. When I posted a thread on the forum asking for pointers on updating this page, the answer I got back stated that OpenWrt version 10.03 was not applicable (too old?). I have flashed OpenWrt Barrier Breaker 14.07 (openwrt-DVAG3810BN-squashfs-cfe.bin) onto this model using the instructions that were here before my additions, but have not tested the router other than accessing the OpenWrt config webpage using 192.168.1.1 in the browser address bar.  This page had not been modified for over two years. As the pre-existing information (following the heading 'Information Below is Pre-2013') is quite detailed and makes a good reference, a few more recent details will be added to the top here (the rest will be left unaltered). The router I have lists a different cpu when ssh'ing into it. The dead firmware download link in the 'Installation' paragraph is for an old version of OpenWrt (10.03). For more current firmware, see the 'Downloads' headings. When I posted a thread on the forum asking for pointers on updating this page, the answer I got back stated that OpenWrt version 10.03 was not applicable (too old?). I have flashed OpenWrt Barrier Breaker 14.07 (openwrt-DVAG3810BN-squashfs-cfe.bin) onto this model using the instructions that were here before my additions, but have not tested the router other than accessing the OpenWrt config webpage using 192.168.1.1 in the browser address bar. 
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1