D-Link DWR-118

The DWR-118 A1 Wireless Router is based on the MT7620A SoC. It has a 802.11bgn radio (SoC-integrated), 802.11ac radio (MT7610EN), three 100Mbit Ethernet ports (3 LAN) and two Gigabit LAN (1 WAN and 3 LAN).

The DWR-118 A2 Wireless Router is based on the MT7620A SoC. It has a 802.11bgn radio (SoC-integrated), 802.11ac radio (MT7612EN), four 100Mbit Ethernet ports (1 WAN and 3 LAN) and one Gigabit LAN .

D-Link DWR-118 A1D-Link DWR-118 A2

None at this time.

Model VersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
DWR-118A1MediaTek MT7620A5801664MediaTek MT7620A, MediaTek MT7610ENb/g/na/n/ac32-1x 2.0
DWR-118A2MediaTek MT7620A58016128MediaTek MT7620A, MediaTek MT7612ENb/g/na/n/ac41-1x 2.0

OEM Flash layout:

D-Link DWR-118 A1 and A2 OEM Flash Layout
Layer0 Winbond 25Q128FVFG (mtd0) 16394 KiB
Layer1 mtd1
Bootloader
64 KiB
mtd2
Kernel
1280 KiB

gap
192 KiB
mtd3
RootFS
13376 KiB
mtd4
Storage
128 KiB

gap
16 _B
mtd5
UI
895 KiB
mtd6
Config
64 KiB

OpenWrt Flash layout:

D-Link DWR-118 Rev. A1 and A2 OpenWrt Flash Layout
Layer0 Winbond 25Q128FVFG 16394 KiB
Layer1 mtd0
JBOOT
64 KiB
mtd1
Firmware
16266 KiB
mtd5
Config
64 KiB
Layer2 mtd2
Kernel
mtd3
RootFS
Layer3
SquashFS
mtd4
RootFS_data

FIXME Use stock web-gui.

  1. Push the reset button and turn on the power. Wait until LED start blinking (~10sec.)
  2. Upload original factory image via JBOOT http (IP: 192.168.123.254)
  3. If http doesn't work, it can be done with curl command:
    curl -F FN=@XXXXX.bin http://192.168.123.254/upg

    where XXXXX.bin is name of firmware file.

  • Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
  • Upload image file for sysupgrade to LuCI
  • Wait for reboot

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line using 'sysupgrade'.

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
Revision A1:
cd /tmp
wget http://downloads.openwrt.org/snapshots/targets/ramips/mt7620/openwrt-ramips-mt7620-dlink_dwr-118-a1-squashfs-sysupgrade.bin
sysupgrade /tmp/openwrt-ramips-mt7620-dlink_dwr-118-a1-squashfs-sysupgrade.bin
Revision A2:
cd /tmp
wget http://downloads.openwrt.org/snapshots/targets/ramips/mt7620/openwrt-ramips-mt7620-dlink_dwr-118-a2-squashfs-sysupgrade.bin
sysupgrade /tmp/openwrt-ramips-mt7620-dlink_dwr-118-a2-squashfs-sysupgrade.bin

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

The default network configuration is:

Interface Name Description Default configuration
br-lan LAN & WiFi 192.168.1.1/24
vlan1 (eth0.1) LAN ports (1 to 3 and GELAN) None
vlan2 (eth0.2) WAN port DHCP
wlan0 WiFi 5 GHz Disabled
wlan1 WiFi 2.4 GHz Disabled

Revision A1:

Port Switch port
Internet (GEWAN) 5
LAN 1 2
LAN 2 3
LAN 3 1
GELAN 4
CPU 6

Revision A2:

Port Switch port
Internet (WAN) 0
LAN 1 2
LAN 2 1
LAN 3 3
GELAN 4
CPU 6

hardware.button on howto use and configure the hardware button(s).

The D-Link DWR-118 A1 and A2 has the following buttons:

BUTTON Event GPIO
Reset reset 13
WPS wps 12

The D-Link DWR-118 A1 and A2 has the following LEDs:

LED GPIO
WAN 72
Internet 40
LAN 72
WLAN 2.4G 39
WLAN 5G -
USB 11

Revision A1:

General
Brand D-Link
Model DWR-118
Versions A1
Device Type WiFi Router
Availability Discontinued
Comments - general
OpenWrt Support
Supported Since Commit https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e9a9b7d1ed76c88e097d5bc4dabf38735312558b
Supported Since Release 19.07.0
Supported Current Release 19.07.6
Unsupported
Hardware
Bootloader JBoot
Target ramips
System-On-Chip
CPU MHz 580
Flash MB 16
RAM MB 64
Network
Ethernet 100M ports 3
Ethernet Gbit ports 2
Switch MediaTek MT7620A
Modem -
VLAN Yes
Comments - network ports 2x IC+ IP1001 Ethernet PHY
Wireless
WLAN 2.4GHz b/g/n
WLAN 5.0GHz a/n/ac
WLAN Hardware MediaTek MT7620A, MediaTek MT7610EN
Detachable Antennas -
Comments - WLAN
Interfaces
USB ports 1x 2.0
SATA ports -
Serial Yes
JTAG No
Comments - USB & SATA ports
Misc
LED count 5
Button count 2
Power supply 12 VDC, 1.5 A
Links
Forum Topic URL
WikiDevi URL https://wikidevi.wi-cat.ru/D-Link_DWR-118_rev_A1
OEM device homepage URL https://eu.dlink.com/uk/en/products/dwr-118-wireless-ac750-dual-band-multi-wan-router
Firmware OEM Stock URL https://eu.dlink.com/uk/en/products/dwr-118-wireless-ac750-dual-band-multi-wan-router
Firmware OpenWrt Install URL http://downloads.openwrt.org/releases/19.07.6/targets/ramips/mt7620/openwrt-19.07.6-ramips-mt7620-dlink_dwr-118-a1-squashfs-factory.bin
Firmware OpenWrt Upgrade URL http://downloads.openwrt.org/releases/19.07.6/targets/ramips/mt7620/openwrt-19.07.6-ramips-mt7620-dlink_dwr-118-a1-squashfs-sysupgrade.bin
Edit the underlying data View/Edit data

Revision A2:

General
Brand D-Link
Model DWR-118
Versions A2
Device Type WiFi Router
Availability Discontinued
Comments - general
OpenWrt Support
Supported Since Commit https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=37af596593b0e84d0a076ab8f173066e3d7bc810
Supported Since Release 19.07.0
Supported Current Release 19.07.6
Unsupported
Hardware
Bootloader JBoot
Target ramips
System-On-Chip
CPU MHz 580
Flash MB 16
RAM MB 128
Network
Ethernet 100M ports 4
Ethernet Gbit ports 1
Switch MediaTek MT7620A
Modem -
VLAN Yes
Comments - network ports Gigabit PHY
Wireless
WLAN 2.4GHz b/g/n
WLAN 5.0GHz a/n/ac
WLAN Hardware MediaTek MT7620A, MediaTek MT7612EN
Detachable Antennas -
Comments - WLAN
Interfaces
USB ports 1x 2.0
SATA ports -
Serial Yes
JTAG No
Comments - USB & SATA ports
Misc
LED count 5
Button count 2
Power supply 12 VDC, 1.5 A
Links
Forum Topic URL
WikiDevi URL https://wikidevi.wi-cat.ru/D-Link_DWR-118_rev_A2
OEM device homepage URL https://eu.dlink.com/uk/en/products/dwr-118-wireless-ac750-dual-band-multi-wan-router
Firmware OEM Stock URL https://eu.dlink.com/uk/en/products/dwr-118-wireless-ac750-dual-band-multi-wan-router
Firmware OpenWrt Install URL http://downloads.openwrt.org/releases/19.07.6/targets/ramips/mt7620/openwrt-19.07.6-ramips-mt7620-dlink_dwr-118-a2-squashfs-factory.bin
Firmware OpenWrt Upgrade URL http://downloads.openwrt.org/releases/19.07.6/targets/ramips/mt7620/openwrt-19.07.6-ramips-mt7620-dlink_dwr-118-a2-squashfs-sysupgrade.bin
Edit the underlying data View/Edit data

Front and Back view:

Revision A1:

Revision A2:

Backside label:

Revision A2:

dwr_118_a2_bottom.jpg

Note: This will void your warranty!

FIXME Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, …

  • To remove the cover and open the device, do a/b/c

Main PCB:

Revision A1:

dwr_118_a2_pcb_front.jpg dwr_118_a2_pcb_back.jpg

Revision A2:

dwr_118_a2_pcb_front.jpg dwr_118_a2_pcb_back.jpg

port.serial general information about the serial port, serial port cable, etc.

Revision A2:

dwr_118_a2_uart.jpg

J1 connector:

pin function
1 TX
2 GND
3 Vcc (~3.3V)
4 ?
5 RX
Serial connection parameters
for D-Link DWR-118 A1 and A2
57600, 8N1

port.jtag general information about the JTAG port, JTAG cable, etc.

DWR-118 A1 and A2 don't have JTAG connector.

bootloader

JBOOT is non-free bootloader.

None so far.

Revision A1:

CDW57CDL_003 Jboot B895 JRecovery Version R1.2 2015/08/31 17:24 spi device id: ef 40 18 0 0 (40180000) SPI FLASH: W25Q128FV 16M . .................... Starting kernel @80000000... LINUX started... THIS IS ASIC Linux version 2.6.36 (tja@RD1) (gcc version 4.3.5 (Buildroot 2011.05) ) #10 Fri Sep 25 17:27:20 CST 2015 CMD_LINE:console=ttyS1,57600n8 root=/dev/mtdblock3 The CPU feqenuce set to 580 MHz PCIE: bypass PCIe DLL. PCIE: Elastic buffer control: Addr:0x68 -> 0xB4 disable all power about PCIe CPU revision is: 00019650 (MIPS 24Kc) Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00004000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00004000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Writing ErrCtl register=0006e880 Readback ErrCtl register=0006e880 Memory: 60736k/65536k available (3163k kernel code, 4800k reserved, 767k data, 180k init, 0k highmem) Hierarchical RCU implementation. RCU debugfs-based tracing is enabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:128 Console: colour dummy device 80x25 console [ttyS1] enabled Calibrating delay loop... 386.04 BogoMIPS (lpj=772096) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 NET: Registered protocol family 16 RALINK_GPIOMODE = 40a09d RALINK_GPIOMODE = 40a09d PPLL_CFG1=0xe64000 MT7620 PPLL lock PPLL_DRV =0x80080504 start PCIe register access RALINK_PCI_PCICFG_ADDR = 1000f0 *************** MT7620 PCIe RC mode ************* bio: create slab <bio-0> at 0 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x20200000-0x2020ffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x20000000-0x200fffff] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff] pci 0000:01:00.1: BAR 0: set to [mem 0x20100000-0x201fffff] (PCI address [0x20100000-0x201fffff] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] pci 0000:00:00.0: bridge window [mem pref disabled] BAR0 at slot 0 = 0 bus=0x0, slot = 0x0 res[0]->start = 0 res[0]->end = 0 res[1]->start = 20200000 res[1]->end = 2020ffff res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 bus=0x1, slot = 0x0 res[0]->start = 20000000 res[0]->end = 200fffff res[1]->start = 0 res[1]->end = 0 res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 bus=0x1, slot = 0x0 res[0]->start = 20100000 res[0]->end = 201fffff res[1]->start = 0 res[1]->end = 0 res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RT3xxx EHCI/OHCI init. squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 118 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered (default) HDLC line discipline maxframe=4096 N_HDLC line discipline registered. Ralink gpio driver initialized Enable Ralink GDMA Controller Module GDMA IP Version=3 ====================================== SPI driver, modified by Jason ====================================== <----- 0x60: 0x0040809d ----- spidrv_major = 217 Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A brd: module loaded deice id : ef 40 18 0 0 (40180000) W25Q128BV(ef 40180000) (16384 Kbytes) mtd .name = raspi, .size = 0x01000000 (0M) .erasesize = 0x00000010 (0K) .numeraseregions = 4096 Creating 7 MTD partitions on "raspi": 0x000000000000-0x000001000000 : "Whole" 0x000000000000-0x000000010000 : "Bootloader" 0x000000010000-0x000000150000 : "Kernel" 0x000000180000-0x000000e90000 : "RootFS" 0x000000e90000-0x000000f10000 : "Storage" 0x000000f10010-0x000000ff0000 : "UI" mtd: partition "UI" doesn't start on an erase block boundary -- force read-only 0x000000ff0000-0x000001000000 : "Config" rdm_major = 253 SMACCR1 -- : 0x0000000c SMACCR0 -- : 0x432880f8 Ralink APSoC Ethernet Driver Initilization. v3.0 256 rx/tx descriptors allocated, mtu = 1500! NAPI enable, Tx Ring = 256, Rx Ring = 256 SMACCR1 -- : 0x0000000c SMACCR0 -- : 0x43288071 PROC INIT OK! PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1 rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000 rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2 rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected u32 classifier Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (949 buckets, 3796 max) ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 IPv4 over IPv4 tunneling driver GRE over IPv4 demultiplexor driver gre: can't add protocol GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Freeing unused kernel memory: 180k freed Inter-| Receive | Transmit face |bytes packets errs drop fifo framswitch register base addr to system register 0xb0000000 e compressed mulwrite offset 0x34, value 0x1800000 ticast|bytes write offset 0x34, value 0x0 packets errs drop fifRaeth v3.0 (o NAPI co,SkbRecyclell) s car phy_tx_ring = 0x03fcb000, tx_ring = 0xa3fcb000 phy_rx_ring0 = 0x03fcc000, rx_ring0 = 0xa3fcc000 0x5,Read PhyID is 0x243 ,0xd91!! SMACCR1 -- : 0x0000000c SMACCR0 -- : 0x43288071 riCDMA_CSG_CFG = 81000000 erGDMA1_FWD_CFG = 20710000 compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 tunl0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gre0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ip6tnl0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 flash_open: flash_fd=3 Mount D Section. mount: /dev/mtdblock5 is write-protected, mounting read-only addrconf_dad_completed 7 flash_open: flash_fd=10 switch register base addr to system register 0xb0000000 write offset 0x60, value 0x40a01d switch reg write offset=2004, value=ff0003 switch reg write offset=2104, value=ff0003 switch reg write offset=2204, value=ff0003 switch reg write offset=2304, value=ff0003 switch reg write offset=2404, value=ff0003 switch reg write offset=2504, value=ff0003 switch reg write offset=2010, value=810000c0 switch reg write offset=2110, value=810000c0 switch reg write offset=2210, value=810000c0 switch reg write offset=2310, value=810000c0 switch reg write offset=2410, value=810000c0 switch reg write offset=2510, value=810000c0 switch reg write offset=2610, value=81000000 switch reg write offset=2710, value=81000000 switch reg write offset=2604, value=20ff0003 switch reg write offset=2704, value=20ff0003 switch reg write offset=2014, value=10002 switch reg write offset=2114, value=10001 switch reg write offset=2214, value=10001 switch reg write offset=2314, value=10001 switch reg write offset=2414, value=10001 switch reg write offset=2514, value=10002 rmmod: hw_nat: No such file or directory ifconfig: SIOCGIFFLAGS: No such device bridge brx0 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx1 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx2 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx3 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx4 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx5 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx6 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx7 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx8 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx9 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx10 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx11 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx12 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx13 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx14 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx15 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx16 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx17 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx18 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx19 doesn't exist; can't delete it sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found iptables v1.4.10: Couldn't load target `block_br':File not found Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.10: Couldn't load target `block_br_input':File not found Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found vconfig: ioctl error for add: File exists vconfig: ioctl error for add: File exists Set port eth2.1.0 vconfig: ioctl error for add: File exists device eth2 entered promiscuous mode set hello timer failed: Invalid argument device eth2.1 entered promiscuous mode br0: port 1(eth2.1) entering forwarding state br0: port 1(eth2.1) entering forwarding state sh: ebtables: not found Set port eth2.2.0 vconfig: ioctl error for add: File exists Set port eth2.2.0 vconfig: ioctl error for add: File exists , Enable: 1 Wireless 5G AP0, Enable: 1 phy 0, reg 0, val 0x800 Set: phy[0].reg[0] = 0800 phy 1, reg 0, val 0x800 Set: phy[1].reg[0] = 0800 phy 2, reg 0, val 0x800 Set: phy[2].reg[0] = 0800 phy 3, reg 0, val 0x800 Set: phy[3].reg[0] = 0800 phy 4, reg 0, val 0x800 Set: phy[4].reg[0] = 0800 phy 5, reg 0, val 0x800 Set: phy[5].reg[0] = 0800 phy 6, reg 0, val 0x800 Set: phy[6].reg[0] = 0800 sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found brctl addif br0 ra0 interface ra0 does not exist! brctl addif br0 rai0 interface rai0 does not exist! hw_nat: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint Ralink HW NAT Module Enabled phy 0, reg 0, val 0x3300 Set: phy[0].reg[0] = 3300 phy 1, reg 0, val 0x3300 Set: phy[1].reg[0] = 3300 addrconf_dad_completed 7 addrconf_dad_completed 7 phy 2, reg 0, val 0x3300 Set: phy[2].reg[0] = 3300 addrconf_dad_completed 7 phy 3, reg 0, val 0x3300 Set: phy[3].reg[0] = 3300 phy 4, reg 0, val 0x3300 Set: phy[4].reg[0] = 3300 phy 5, reg 0, val 0x3300 Set: phy[5].reg[0] = 3300 phy 6, reg 0, val 0x3300 Set: phy[6].reg[0] = 3300 init vlan init lan init stp init wan init ondemand init multiwan init multi_ondemand init routing init nat ==== NAT START (WAN:ALL Func:ALL) ==== ESW: Link Status Changed - Port1 Link UP cat: /var/nat/nat.wan: No such file or directory framtd_erase: addr:ff0000 len:0 lash_open: flash_fd=10 ramtd_write: to:ff0000 len:10 ramtd_write: to:ff0010 len:5cc ramtd_write: to:ff0000 len:1 /var/nat/nat-draft.uyg: /var/nat/nat-draft.uyg: 131: cannot create /proc/sys/net/ipv4/route/secret_interval: Directory nonexistent addrconf_dad_completed 7 ESW: Link Status Changed - Port1 Link Down SINGLE DMZ start gre_post Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`). modprobe: module ip6_tables not found modprobe: failed to load module ip6_tables ip6tables v1.4.10: can't initialize ip6tables table `filter': iptables who? (do you need to insmod?) Perhaps ip6tables or your kernel needs to be upgraded. /var/nat/nat-draft.uyg: /var/nat/nat-draft.uyg: 33: control: not found init dhcpsrv server_config.pool_check = 1 server_config.pool_check = 1 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0 0 Unable to open /var/run/udhcpd.leases for reading udhcpd (v0.9.9-pre) started Unable to open /var/run/udhcpd.leases for reading init dnsrelay init spap init ddns init snmp init route_protocol rm: cannot remove '/etc/ripd.conf': No such file or directory cat: /var/run/ripd.pid: No such file or directory BusyBox v1.3.2 (2015-08-31 17:31:45 CST) multi-call binary Usage: kill [-l] [-signal] process-id [process-id ...] cat: /var/run/zebra.pid: No such file or directory BusyBox v1.3.2 (2015-08-31 17:31:45 CST) multi-call binary Usage: kill [-l] [-signal] process-id [process-id ...] init load_balance init time timezone:-60 dsttime:0 init rbydom init rbyip init qos init keepalive init user init ftp_alg init rtsp_alg init schedule init mupnpd init watchdog init reboot init wireless_mode server_config.pool_check = 1 server_config.pool_check = 1 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0 0 udhcpd (v0.9.9-pre) started init wlanap ESW: Link Status Changed - Port1 Link UP Length of MAC:6 mac:6c:72:20:a5:9e:f8: ---- === pAd = c0882000, size = 1632152 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 device_id =0x7650 ==>MT76x0_WLAN_ChipOnOff(): OnOff:1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002 MACVersion = 0x76502000 load fw spent 12ms RX DESC a26e4000 size = 2048 RX1 DESC a26e5000 size = 2048 ESW: Link Status Changed - Port1 Link Down cfg_mode=14 cfg_mode=14 wmode_band_equal(): Band Not Equal! 2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f: 50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97: 1. Phy Mode = 49 2. Phy Mode = 49 ext_pa_current_setting = 1 3. Phy Mode = 49 AntCfgInit: primary/secondary ant 0/1 ChipStructAssign(): RALINK6590 hook ! MCS Set = ff 00 00 00 01 MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) Main bssid = 6c:72:20:a5:9e:f8 <==== rt28xx_init, Status=0 ESW: Link Status Changed - Port1 Link UP MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=3, PrimCh=48, HT-CentCh=46, VHT-CentCh=42 APStartUp(): AP Set CentralFreq at 42(Prim=48, HT-CentCh=46, VHT-CentCh=42, BBP_BW=2) 0x1300 = 00064300 RTMPDrvOpen(1):Check if PDMA is idle! RTMPDrvOpen(2):Check if PDMA is idle! device rai0 entered promiscuous mode br0: port 2(rai0) entering forwarding state br0: port 2(rai0) entering forwarding state ESW: Link Status Changed - Port1 Link Down killall: check_status2: no process killed route: SIOC[ADD|DEL]RT: No such device wscd: SSDP UDP PORT = 1900 Invalid command : ledflashstop device wdsi0 is not a slave of br0 device wdsi1 is not a slave of br0 device wdsi2 is not a slave of br0 device wdsi3 is not a slave of br0 device rai0 left promiscuous mode br0: port 2(rai0) entering forwarding state ==>MT76x0_WLAN_ChipOnOff(): OnOff:0, pAd->WlanFunCtrl:0xff000003, Reg-WlanFunCtrl=0xff000003 init wps_status init wps_btn init wpa init ipv6 init v6filter modprobe: module ip6_tables not found modprobe: failed to load module ip6_tables modprobe: module ip6table_filter not found modprobe: failed to load module ip6table_filter modprobe: module ip6table_mangle not found modprobe: failed to load module ip6table_mangle modprobe: module ip6t_rt not found modprobe: failed to load module ip6t_rt modprobe: module ip6t_REJECT not found modprobe: failed to load module ip6t_REJECT init ddnsv6 init failover init hwnat init 3g_status init sip_alg init igmp init reset_btn init ate killall: ated: no process killed init wan_led init recent init httpd init telnetd /usr/bin/telnetd-action: Don't Start telnetd since CSID is set disable ... /usr/bin/telnetd-action start ok /usr/bin/ataskset: /usr/bin/ataskset: 6: taskset: not found flash_open: flash_fd=4 flash_open: flash_fd=4 framtd_erase: addr:ff0000 len:0 lash_open: flash_fd=10 ramtd_write: to:ff0000 len:10 ramtd_write: to:ff0010 len:5ce ramtd_write: to:ff0000 len:1 flash_open: flash_fd=4 addrconf_dad_completed 7 ESW: Link Status Changed - Port1 Link UP # ESW: Link Status Changed - Port1 Link Down ESW: Link Status Changed - Port1 Link UP ESW: Link Status Changed - Port1 Link Down ESW: Link Status Changed - Port1 Link UP Length of MAC:6 mac:6c:72:20:a5:9e:f7: ---- === pAd = c1232000, size = 960336 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 AP Driver version-2.7.1.6 RX DESC a25d7000 size = 2048 RTMP_TimerListAdd: add timer obj c129d638! RTMP_TimerListAdd: add timer obj c123a23c! RTMP_TimerListAdd: add timer obj c1239e30! RTMP_TimerListAdd: add timer obj c123a20c! RTMP_TimerListAdd: add timer obj c123a548! RTMP_TimerListAdd: add timer obj c123a488! RTMP_TimerListAdd: add timer obj c123a4b8! RTMP_TimerListAdd: add timer obj c123d648! RTMP_TimerListAdd: add timer obj c123d23c! RTMP_TimerListAdd: add timer obj c123d618! RTMP_TimerListAdd: add timer obj c123d954! RTMP_TimerListAdd: add timer obj c123d894! RTMP_TimerListAdd: add timer obj c123d8c4! RTMP_TimerListAdd: add timer obj c1240a54! RTMP_TimerListAdd: add timer obj c1240648! RTMP_TimerListAdd: add timer obj c1240a24! RTMP_TimerListAdd: add timer obj c1240d60! RTMP_TimerListAdd: add timer obj c1240ca0! RTMP_TimerListAdd: add timer obj c1240cd0! RTMP_TimerListAdd: add timer obj c1243e60! RTMP_TimerListAdd: add timer obj c1243a54! RTMP_TimerListAdd: add timer obj c1243e30! RTMP_TimerListAdd: add timer obj c124416c! RTMP_TimerListAdd: add timer obj c12440ac! RTMP_TimerListAdd: add timer obj c12440dc! RTMP_TimerListAdd: add timer obj c124726c! RTMP_TimerListAdd: add timer obj c1246e60! RTMP_TimerListAdd: add timer obj c124723c! RTMP_TimerListAdd: add timer obj c1247578! RTMP_TimerListAdd: add timer obj c12474b8! RTMP_TimerListAdd: add timer obj c12474e8! RTMP_TimerListAdd: add timer obj c124a678! RTMP_TimerListAdd: add timer obj c124a26c! RTMP_TimerListAdd: add timer obj c124a648! RTMP_TimerListAdd: add timer obj c124a984! RTMP_TimerListAdd: add timer obj c124a8c4! RTMP_TimerListAdd: add timer obj c124a8f4! RTMP_TimerListAdd: add timer obj c124da84! RTMP_TimerListAdd: add timer obj c124d678! RTMP_TimerListAdd: add timer obj c124da54! RTMP_TimerListAdd: add timer obj c124dd90! RTMP_TimerListAdd: add timer obj c124dcd0! RTMP_TimerListAdd: add timer obj c124dd00! RTMP_TimerListAdd: add timer obj c1250e90! RTMP_TimerListAdd: add timer obj c1250a84! RTMP_TimerListAdd: add timer obj c1250e60! RTMP_TimerListAdd: add timer obj c125119c! RTMP_TimerListAdd: add timer obj c12510dc! RTMP_TimerListAdd: add timer obj c125110c! RTMP_TimerListAdd: add timer obj c125429c! RTMP_TimerListAdd: add timer obj c1253e90! RTMP_TimerListAdd: add timer obj c125426c! RTMP_TimerListAdd: add timer obj c12545a8! RTMP_TimerListAdd: add timer obj c12544e8! RTMP_TimerListAdd: add timer obj c1254518! RTMP_TimerListAdd: add timer obj c12576a8! RTMP_TimerListAdd: add timer obj c125729c! RTMP_TimerListAdd: add timer obj c1257678! RTMP_TimerListAdd: add timer obj c12579b4! RTMP_TimerListAdd: add timer obj c12578f4! RTMP_TimerListAdd: add timer obj c1257924! RTMP_TimerListAdd: add timer obj c125aab4! RTMP_TimerListAdd: add timer obj c125a6a8! RTMP_TimerListAdd: add timer obj c125aa84! RTMP_TimerListAdd: add timer obj c125adc0! RTMP_TimerListAdd: add timer obj c125ad00! RTMP_TimerListAdd: add timer obj c125ad30! RTMP_TimerListAdd: add timer obj c125dec0! RTMP_TimerListAdd: add timer obj c125dab4! RTMP_TimerListAdd: add timer obj c125de90! RTMP_TimerListAdd: add timer obj c125e1cc! RTMP_TimerListAdd: add timer obj c125e10c! RTMP_TimerListAdd: add timer obj c125e13c! RTMP_TimerListAdd: add timer obj c12612cc! RTMP_TimerListAdd: add timer obj c1260ec0! RTMP_TimerListAdd: add timer obj c126129c! RTMP_TimerListAdd: add timer obj c12615d8! RTMP_TimerListAdd: add timer obj c1261518! RTMP_TimerListAdd: add timer obj c1261548! RTMP_TimerListAdd: add timer obj c12646d8! RTMP_TimerListAdd: add timer obj c12642cc! RTMP_TimerListAdd: add timer obj c12646a8! RTMP_TimerListAdd: add timer obj c12649e4! RTMP_TimerListAdd: add timer obj c1264924! RTMP_TimerListAdd: add timer obj c1264954! RTMP_TimerListAdd: add timer obj c1267ae4! RTMP_TimerListAdd: add timer obj c12676d8! RTMP_TimerListAdd: add timer obj c1267ab4! RTMP_TimerListAdd: add timer obj c1267df0! RTMP_TimerListAdd: add timer obj c1267d30! RTMP_TimerListAdd: add timer obj c1267d60! RTMP_TimerListAdd: add timer obj c126aef0! RTMP_TimerListAdd: add timer obj c126aae4! RTMP_TimerListAdd: add timer obj c126aec0! RTMP_TimerListAdd: add timer obj c126b1fc! RTMP_TimerListAdd: add timer obj c126b13c! RTMP_TimerListAdd: add timer obj c126b16c! RTMP_TimerListAdd: add timer obj c1273fa4! RTMP_TimerListAdd: add timer obj c12740c0! RTMP_TimerListAdd: add timer obj c1273fd0! RTMP_TimerListAdd: add timer obj c126b52c! RTMP_TimerListAdd: add timer obj c12374cc! RTMP_TimerListAdd: add timer obj c123a8d8! RTMP_TimerListAdd: add timer obj c123dce4! RTMP_TimerListAdd: add timer obj c12410f0! RTMP_TimerListAdd: add timer obj c12444fc! RTMP_TimerListAdd: add timer obj c1247908! RTMP_TimerListAdd: add timer obj c124ad14! RTMP_TimerListAdd: add timer obj c124e120! RTMP_TimerListAdd: add timer obj c125152c! RTMP_TimerListAdd: add timer obj c1254938! RTMP_TimerListAdd: add timer obj c1257d44! RTMP_TimerListAdd: add timer obj c125b150! RTMP_TimerListAdd: add timer obj c125e55c! RTMP_TimerListAdd: add timer obj c1261968! RTMP_TimerListAdd: add timer obj c1264d74! RTMP_TimerListAdd: add timer obj c1268180! RTMP_TimerListAdd: add timer obj c126b240! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 1. Phy Mode = 9 2. Phy Mode = 9 E2PROM: D0 target power=0xff20 E2PROM: 40 MW Power Delta= 0 3. Phy Mode = 9 AntCfgInit: primary/secondary ant 0/1 Initialize RF Central Registers for E2 !!! Initialize RF Central Registers for E3 !!! Initialize RF Channel Registers for E2 !!! Initialize RF Channel Registers for E3 !!! Initialize RF DCCal Registers for E2 !!! Initialize RF DCCal Registers for E3 !!! D1 = 1, D2 = 4, CalCode = 7 !!! RT6352_Temperature_Init : BBPR49 = 0x1 RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff7 Current Temperature from BBP_R49=0xfffffff9 TX BW Filter Calibration !!! RX BW Filter Calibration !!! LOFT Calibration Done! IQCalibration Start! IQCalibration Done! CH = 0, (gain= d, phase= 2) IQCalibration Start! IQCalibration Done! CH = 1, (gain= 1, phase=3d) TX IQ Calibration Done! RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff ff 00 00 01 SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l RTMP_TimerListAdd: add timer obj c126bab4! Main bssid = 6c:72:20:a5:9e:f7 <==== rt28xx_init, Status=0 0x1300 = 00064380 device ra0 entered promiscuous mode br0: port 2(ra0) entering forwarding state br0: port 2(ra0) entering forwarding state Ralink HW NAT Module Disabled Ralink APSoC Hardware Watchdog Timer Started WatchDog Timer. Started WatchDog Timer. LoadVlaue: 36600 sysclk: 145000000 TIMEOUT: 60 addrconf_dad_completed 7 RTMP_TimerListAdd: add timer obj c0fc9618! ==>MT76x0_WLAN_ChipOnOff(): OnOff:1, pAd->WlanFunCtrl:0xff000000, Reg-WlanFunCtrl=0xff000000 MACVersion = 0x76502000 load fw spent 0ms RX DESC a26e4000 size = 2048 RX1 DESC a26e5000 size = 2048 ramtd_erase: addr:ff0000 len:0 cfg_mode=14 cfg_mode=14 wmode_band_equal(): Band Not Equal! 2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f: 50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97: ramtd_write: to:ff0000 len:10 ramtd_write: to:ff0010 len:5ce ramtd_write: to:ff0000 len:1 1. Phy Mode = 49 2. Phy Mode = 49 ext_pa_current_setting = 1 3. Phy Mode = 49 AntCfgInit: primary/secondary ant 0/1 ChipStructAssign(): RALINK6590 hook ! MCS Set = ff 00 00 00 01 MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) Main bssid = 6c:72:20:a5:9e:f8 <==== rt28xx_init, Status=0 MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=1, PrimCh=44, HT-CentCh=46, VHT-CentCh=42 APStartUp(): AP Set CentralFreq at 42(Prim=44, HT-CentCh=46, VHT-CentCh=42, BBP_BW=2) 0x1300 = 00064300 RTMPDrvOpen(1):Check if PDMA is idle! RTMPDrvOpen(2):Check if PDMA is idle! device rai0 entered promiscuous mode br0: port 3(rai0) entering forwarding state br0: port 3(rai0) entering forwarding state addrconf_dad_completed 7


Revision A2:

CDW57BDL_003 Jboot B1162 JRecovery Version R1.2 2016/11/07 14:32 spi device id: ef 40 18 0 0 (40180000) SPI FLASH: W25Q128FV 16M . .................... Starting kernel @80000000... LINUX started... THIS IS ASIC Linux version 2.6.36 (Laroche@localhost.localdomain) (gcc version 4.3.5 (Buildroot 2011.05) ) #6 Mon Nov 27 16:23:42 CST 2017 CMD_LINE:console=ttyS1,57600n8 root=/dev/mtdblock3 The CPU feqenuce set to 580 MHz PCIE: bypass PCIe DLL. PCIE: Elastic buffer control: Addr:0x68 -> 0xB4 disable all power about PCIe CPU revision is: 00019650 (MIPS 24Kc) Determined physical RAM map: memory: 08000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00008000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00008000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Writing ErrCtl register=00007b53 Readback ErrCtl register=00007b53 Memory: 125704k/131072k available (3172k kernel code, 5368k reserved, 767k data, 180k init, 0k highmem) Hierarchical RCU implementation. RCU debugfs-based tracing is enabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:128 Console: colour dummy device 80x25 console [ttyS1] enabled Calibrating delay loop... 386.04 BogoMIPS (lpj=772096) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 NET: Registered protocol family 16 RALINK_GPIOMODE = 40a09d RALINK_GPIOMODE = 40a09d PPLL_CFG1=0xe4c000 MT7620 PPLL lock PPLL_DRV =0x80080504 start PCIe register access RALINK_PCI_PCICFG_ADDR = 1000f0 *************** MT7620 PCIe RC mode ************* bio: create slab <bio-0> at 0 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x20200000-0x2020ffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff 64bit] (PCI address [0x20000000-0x200fffff] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref] BAR0 at slot 0 = 0 bus=0x0, slot = 0x0 res[0]->start = 0 res[0]->end = 0 res[1]->start = 20200000 res[1]->end = 2020ffff res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 bus=0x1, slot = 0x0 res[0]->start = 20000000 res[0]->end = 200fffff res[1]->start = 0 res[1]->end = 0 res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RT3xxx EHCI/OHCI init. squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 245 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered (default) HDLC line discipline maxframe=4096 N_HDLC line discipline registered. Ralink gpio driver initialized Enable Ralink GDMA Controller Module GDMA IP Version=3 ====================================== SPI driver, modified by Jason ====================================== <----- 0x60: 0x0040809d ----- spidrv_major = 217 Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A brd: module loaded deice id : ef 40 18 0 0 (40180000) W25Q128BV(ef 40180000) (16384 Kbytes) mtd .name = raspi, .size = 0x01000000 (0M) .erasesize = 0x00000010 (0K) .numeraseregions = 65536 Creating 7 MTD partitions on "raspi": 0x000000000000-0x000001000000 : "Whole" 0x000000000000-0x000000010000 : "Bootloader" 0x000000010000-0x000000150000 : "Kernel" 0x000000180000-0x000000e90000 : "RootFS" 0x000000e90000-0x000000f10000 : "Storage" 0x000000f10010-0x000000ff0000 : "UI" mtd: partition "UI" doesn't start on an erase block boundary -- force read-only 0x000000ff0000-0x000001000000 : "Config" SMACCR1 -- : 0x0000000c SMACCR0 -- : 0x432880f8 Ralink APSoC Ethernet Driver Initilization. v3.0 256 rx/tx descriptors allocated, mtu = 1500! NAPI enable, Tx Ring = 256, Rx Ring = 256 SMACCR1 -- : 0x0000000c SMACCR0 -- : 0x432880f1 PROC INIT OK! PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1 rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000 rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2 rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected u32 classifier Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1964 buckets, 7856 max) ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 IPv4 over IPv4 tunneling driver GRE over IPv4 demultiplexor driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Freeing unused kernel memory: 180k freed Inter-| Receive Raeth v3.0 ( NAPI ,SkbRecycle ) phy_tx_ring = 0x07fd1000, tx_ring = 0xa7fd1000 phy_rx_ring0 = 0x07fd2000, rx_ring0 = 0xa7fd2000 Set 7014 to 1000c Marvel Giga Phy is found Reset MARVELL phy2 Reset MARVELL phy2 Done SMACCR1 -- : 0x0000000c SMACCR0 -- : 0x432880f1 ESW: Link Status Changed - Port3 Link Down CDMA_CSG_CFG = 81000000 GDMA1_FWD_CFG = 20710000 | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 tunl0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gre0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ip6tnl0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 flash_open: flash_fd=3 Mount D Section. mount: /dev/mtdblock5 is write-protected, mounting read-only flash_open: flash_fd=9 Unhandled kernel unaligned access[#1]: Cpu 0 $ 0 : 00000000 00000001 00006b04 00006b02 $ 4 : 87f35c40 00606b02 0040a01d 0040a01d $ 8 : 803d0000 80000008 800b4440 fffffff8 $12 : 7f1c0300 2aeea000 00000018 00400d00 $16 : ffffffe7 87f35c40 00000004 b0000000 $20 : 00606b02 0040a01d 00400a64 00000002 $24 : 0000001b 2aefdb80 $28 : 87d0a000 87d0be40 00480000 800b3dbc Hi : 00000369 Lo : 00001be5 epc : 801b6620 rdm_ioctl+0x98/0x490 Not tainted ra : 800b3dbc do_vfs_ioctl+0xb0/0x734 Status: 1100ff03 KERNEL EXL IE Cause : 00800010 BadVA : 0040a01d PrId : 00019650 (MIPS 24Kc) Modules linked in: Process reg (pid: 877, threadinfo=87d0a000, task=87c60918, tls=00000000) Stack : 00000000 87c3b000 87c0d1c0 8785e0d4 87c60918 2aefe690 87c0d1c0 8785e0d4 01bd07b0 00000004 ffffffe7 87f35c40 00000004 0040a01d 00606b02 004005bc 00400a64 800b3dbc 80409000 80097e00 00000000 00030002 00000000 00000000 fffffff4 00000001 00000000 87f35c40 87ca4e40 87ca4e48 00000000 00000000 00000000 00000000 00000000 800b0504 87f35c48 00000020 87f35c40 87f35c40 ... Call Trace: [<801b6620>] rdm_ioctl+0x98/0x490 [<800b3dbc>] do_vfs_ioctl+0xb0/0x734 [<800b4490>] sys_ioctl+0x50/0xb0 [<8000a144>] stack_done+0x20/0x40 Code: 24026b02 1462008b 24026b04 <8ea30000> 00051402 00531021 ac430000 8fbf0044 00003821 Disabling lock debugging due to kernel taint addrconf_dad_completed 7 Segmentation fault switch reg write offset=2004, value=ff0003 ESW: Link Status Changed - Port3 Link UP switch reg write offset=2104, value=ff0003 switch reg write offset=2204, value=ff0003 switch reg write offset=2304, value=ff0003 switch reg write offset=2404, value=ff0003 switch reg write offset=2504, value=ff0003 switch reg write offset=2010, value=810000c0 switch reg write offset=2110, value=810000c0 switch reg write offset=2210, value=810000c0 switch reg write offset=2310, value=810000c0 switch reg write offset=2410, value=810000c0 switch reg write offset=2510, value=810000c0 switch reg write offset=2610, value=81000000 switch reg write offset=2710, value=81000000 switch reg write offset=2604, value=20ff0003 switch reg write offset=2704, value=20ff0003 switch reg write offset=2014, value=10002 switch reg write offset=2114, value=10001 switch reg write offset=2214, value=10001 switch reg write offset=2314, value=10001 switch reg write offset=2414, value=10001 switch reg write offset=2514, value=10002 rmmod: hw_nat: No such file or directory ifconfig: SIOCGIFFLAGS: No such device bridge brx0 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx1 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx2 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx3 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx4 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx5 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx6 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx7 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx8 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx9 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx10 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx11 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx12 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx13 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx14 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx15 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx16 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx17 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx18 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device bridge brx19 doesn't exist; can't delete it sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found iptables v1.4.10: Couldn't load target `block_br':File not found Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.10: Couldn't load target `block_br_input':File not found Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found vconfig: ioctl error for add: File exists Set port eth2.1.0 vconfig: ioctl error for add: File exists device eth2 entered promiscuous mode set hello timer failed: Invalid argument device eth2.1 entered promiscuous mode br0: port 1(eth2.1) entering forwarding state br0: port 1(eth2.1) entering forwarding state sh: ebtables: not found Set port eth2.2.0 vconfig: ioctl error for add: File exists , Enable: 1 Wireless 5G AP0, Enable: 1 phy 0, reg 0, val 0x800 Set: phy[0].reg[0] = 0800 phy 1, reg 0, val 0x800 Set: phy[1].reg[0] = 0800 phy 2, reg 0, val 0x800 Set: phy[2].reg[0] = 0800 phy 3, reg 0, val 0x800 Set: phy[3].reg[0] = 0800 phy 4, reg 0, val 0x800 Set: phy[4].reg[0] = 0800 phy 5, reg 0, val 0x800 Set: phy[5].reg[0] = 0800 sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found sh: ebtables: not found brctl addif br0 ra0 interface ra0 does not exist! brctl addif br0 rai0 ESW: Link Status Changed - Port3 Link Down interface rai0 does not exist! phy 0, reg 0, val 0x3300 Set: phy[0].reg[0] = 3300 addrconf_dad_completed 7 phy 1, reg 0, val 0x3300 Set: phy[1].reg[0] = 3300 phy 2, reg 0, val 0x3300 Set: phy[2].reg[0] = 3300 addrconf_dad_completed 7 phy 3, reg 0, val 0x3300 Set: phy[3].reg[0] = 3300 addrconf_dad_completed 7 phy 4, reg 0, val 0x3300 Set: phy[4].reg[0] = 3300 phy 5, reg 0, val 0x3300 Set: phy[5].reg[0] = 3300 init vlan init lan init stp init ondemand init multiwan2 init multi_ondemand init routing init nat ==== NAT START (WAN:ALL Func:ALL) ==== cat: /var/nat/nat.wan: No such file or directory /var/nat/nat-draft.uyg: /var/nat/nat-draft.uyg: 141: cannot create /proc/sys/net/ipv4/route/secret_interval: Directory nonexistent addrconf_dad_completed 7 SINGLE DMZ start gre_post ESW: Link Status Changed - Port3 Link UP Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`). modprobe: module ip6_tables not found modprobe: failed to load module ip6_tables ip6tables v1.4.10: can't initialize ip6tables table `filter': iptables who? (do you need to insmod?) Perhaps ip6tables or your kernel needs to be upgraded. init dhcpsrv sdmz_enable:0 server_config.pool_check = 1 server_config.pool_check = 1 start = 192.168.2.50, end = 192.168.2.199, lan_ip = 192.168.2.1, interface=br0, ifindex=0 start = 192.168.2.50, end = 192.168.2.199, lan_ip = 192.168.2.1, interface=br0, ifindex=0 0 Unable to open /var/run/udhcpd.leases for reading udhcpd (v0.9.9-pre) started Unable to open /var/run/udhcpd.leases for reading init dnsrelay init spap init ddns init snmp init route_protocol rm: cannot remove '/etc/ripd.conf': No such file or directory cat: /var/run/ripd.pid: No such file or directory BusyBox v1.3.2 (2017-11-14 11:35:37 CST) multi-call binary Usage: kill [-l] [-signal] process-id [process-id ...] cat: /var/run/zebra.pid: No such file or directory BusyBox v1.3.2 (2017-11-14 11:35:37 CST) multi-call binary Usage: kill [-l] [-signal] process-id [process-id ...] init load_balance init time timezone:-60 dsttime:0 init rbydom init rbyip init qos init keepalive init user init ftp_alg init rtsp_alg init schedule init mupnpd init watchdog init reboot init wireless_mode sdmz_enable:0 server_config.pool_check = 1 server_config.pool_check = 1 start = 192.168.2.50, end = 192.168.2.199, lan_ip = 192.168.2.1, interface=br0, ifindex=0 start = 192.168.2.50, end = 192.168.2.199, lan_ip = 192.168.2.1, interface=br0, ifindex=0 0 udhcpd (v0.9.9-pre) started init wlanap eth2: no IPv6 routers present Length of MAC:6 mac:1c:5f:2b:f3:25:a0: ---- register rt2860_mt7612 PCI: Setting latency timer of device 0000:01:00.0 to 64 === pAd = c0882000, size = 2136912 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 pAd->CSRBaseAddress =0xc0780000, csr_addr=0xc0780000! device_id =0x7662 ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a cfg_mode=14 cfg_mode=14 wmode_band_equal(): Band Not Equal! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 default ApCliAPSDCapable[0]=0 pAd->ed_threshold = 90 pAd->ed_false_cca_threshold = 3000 2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f: 50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97: ChipID = 7612 RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 NVM is FLASH mode (pAd->flash_offset = 0x0) get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai build time = 20141115060606a rom patch for E3 IC platform = ALPS hw/sw version = ???? patch version = ? FW Version:0.0.00 Build:1 Build Time:201507311614____ fw for E3 IC RX[0] DESC a7668000 size = 4096 RX[1] DESC a7669000 size = 4096 RTMP_TimerListAdd: add timer obj c0892338! RTMP_TimerListAdd: add timer obj c09954cc! RTMP_TimerListAdd: add timer obj c091ad50! RTMP_TimerListAdd: add timer obj c091ad24! RTMP_TimerListAdd: add timer obj c091ad7c! RTMP_TimerListAdd: add timer obj c091acf8! RTMP_TimerListAdd: add timer obj c091a7bc! RTMP_TimerListAdd: add timer obj c08963dc! RTMP_TimerListAdd: add timer obj c0895fc0! RTMP_TimerListAdd: add timer obj c08963ac! RTMP_TimerListAdd: add timer obj c0896754! RTMP_TimerListAdd: add timer obj c08964a4! RTMP_TimerListAdd: add timer obj c08964d4! RTMP_TimerListAdd: add timer obj c0896694! RTMP_TimerListAdd: add timer obj c08966c4! RTMP_TimerListAdd: add timer obj c08996f4! RTMP_TimerListAdd: add timer obj c08992d8! RTMP_TimerListAdd: add timer obj c08996c4! RTMP_TimerListAdd: add timer obj c0899a6c! RTMP_TimerListAdd: add timer obj c08997bc! RTMP_TimerListAdd: add timer obj c08997ec! RTMP_TimerListAdd: add timer obj c08999ac! RTMP_TimerListAdd: add timer obj c08999dc! RTMP_TimerListAdd: add timer obj c089ca0c! RTMP_TimerListAdd: add timer obj c089c5f0! RTMP_TimerListAdd: add timer obj c089c9dc! RTMP_TimerListAdd: add timer obj c089cd84! RTMP_TimerListAdd: add timer obj c089cad4! RTMP_TimerListAdd: add timer obj c089cb04! RTMP_TimerListAdd: add timer obj c089ccc4! RTMP_TimerListAdd: add timer obj c089ccf4! RTMP_TimerListAdd: add timer obj c089fd24! RTMP_TimerListAdd: add timer obj c089f908! RTMP_TimerListAdd: add timer obj c089fcf4! RTMP_TimerListAdd: add timer obj c08a009c! RTMP_TimerListAdd: add timer obj c089fdec! RTMP_TimerListAdd: add timer obj c089fe1c! RTMP_TimerListAdd: add timer obj c089ffdc! RTMP_TimerListAdd: add timer obj c08a000c! RTMP_TimerListAdd: add timer obj c08a303c! RTMP_TimerListAdd: add timer obj c08a2c20! RTMP_TimerListAdd: add timer obj c08a300c! RTMP_TimerListAdd: add timer obj c08a33b4! RTMP_TimerListAdd: add timer obj c08a3104! RTMP_TimerListAdd: add timer obj c08a3134! RTMP_TimerListAdd: add timer obj c08a32f4! RTMP_TimerListAdd: add timer obj c08a3324! RTMP_TimerListAdd: add timer obj c08a6354! RTMP_TimerListAdd: add timer obj c08a5f38! RTMP_TimerListAdd: add timer obj c08a6324! RTMP_TimerListAdd: add timer obj c08a66cc! RTMP_TimerListAdd: add timer obj c08a641c! RTMP_TimerListAdd: add timer obj c08a644c! RTMP_TimerListAdd: add timer obj c08a660c! RTMP_TimerListAdd: add timer obj c08a663c! RTMP_TimerListAdd: add timer obj c08a966c! RTMP_TimerListAdd: add timer obj c08a9250! RTMP_TimerListAdd: add timer obj c08a963c! RTMP_TimerListAdd: add timer obj c08a99e4! RTMP_TimerListAdd: add timer obj c08a9734! RTMP_TimerListAdd: add timer obj c08a9764! RTMP_TimerListAdd: add timer obj c08a9924! RTMP_TimerListAdd: add timer obj c08a9954! RTMP_TimerListAdd: add timer obj c08ac984! RTMP_TimerListAdd: add timer obj c08ac568! RTMP_TimerListAdd: add timer obj c08ac954! RTMP_TimerListAdd: add timer obj c08accfc! RTMP_TimerListAdd: add timer obj c08aca4c! RTMP_TimerListAdd: add timer obj c08aca7c! RTMP_TimerListAdd: add timer obj c08acc3c! RTMP_TimerListAdd: add timer obj c08acc6c! RTMP_TimerListAdd: add timer obj c091d1d4! RTMP_TimerListAdd: add timer obj c091cdb8! RTMP_TimerListAdd: add timer obj c091d1a4! RTMP_TimerListAdd: add timer obj c091d54c! RTMP_TimerListAdd: add timer obj c091d29c! RTMP_TimerListAdd: add timer obj c091d2cc! RTMP_TimerListAdd: add timer obj c091d204! RTMP_TimerListAdd: add timer obj c091d234! RTMP_TimerListAdd: add timer obj c091d264! RTMP_TimerListAdd: add timer obj c094124c! RTMP_TimerListAdd: add timer obj c094133c! RTMP_TimerListAdd: add timer obj c0941278! RTMP_TimerListAdd: add timer obj c091d8bc! cfg_mode=14 cfg_mode=14 wmode_band_equal(): Band Not Equal! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 default ApCliAPSDCapable[0]=0 pAd->ed_threshold = 90 pAd->ed_false_cca_threshold = 3000 eth2.1: no IPv6 routers present 2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f: 50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97: 1. Phy Mode = 49 get_chl_grp:illegal channel (167) get_chl_grp:illegal channel (167) get_chl_grp:illegal channel (169) br0: no IPv6 routers present get_chl_grp:illegal channel (169) get_chl_grp:illegal channel (171) get_chl_grp:illegal channel (171) /home/Laroche/Ra/DWR-118A2/rootfs/src/amit_priv/RalinkRT2860AP/mt7612e_3040/rlt_wifi_ap/../rlt_wifi/chips/mt76x2.c:2899 assert (ad->TxPower[choffset].Channel == 42)failed Country Region from e2p = 6 mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0 mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=0 mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9 mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=13, low_temp_slope=16 mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4 mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=-7, tc_upper_bound=5 mt76x2_get_external_lna_gain::LNA type=0x0, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8c, ALNAGain1=0xffffff8c, ALNAGain2=0xffffff8c 2. Phy Mode = 49 RTMP_TimerListAdd: add timer obj c0893828! RTMP_TimerListAdd: add timer obj c0896b40! RTMP_TimerListAdd: add timer obj c0899e58! RTMP_TimerListAdd: add timer obj c089d170! RTMP_TimerListAdd: add timer obj c08a0488! RTMP_TimerListAdd: add timer obj c08a37a0! RTMP_TimerListAdd: add timer obj c08a6ab8! RTMP_TimerListAdd: add timer obj c08a9dd0! RTMP_TimerListAdd: add timer obj c091d5d0! 3. Phy Mode = 49 andes_pci_fw_init 0x1300 = 00073200 AntCfgInit: primary/secondary ant 0/1 andes_load_cr:cr_type(2) ChipStructAssign(): MT76x2 hook ! RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff ff 00 00 01 RTMP_TimerListAdd: add timer obj c09270e4! mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) mt76x2_calibration(channel = 42) @@@ ed_monitor_exit : ===> @@@ ed_monitor_exit : <=== Main bssid = 1c:5f:2b:f3:25:a0 mt76x2_reinit_agc_gain:original agc_vga0 = 0x48, agc_vga1 = 0x48 mt76x2_reinit_agc_gain:updated agc_vga0 = 0x48, agc_vga1 = 0x48 mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x33, hi_lna1 = 0x33 mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x33, hi_lna1 = 0x33 original vga value(chain0) = 48 original vga value(chain1) = 48 <==== rt28xx_init, Status=0 get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apclii RTMPDrvOpen(1):Check if PDMA is idle! RTMPDrvOpen(2):Check if PDMA is idle! device rai0 entered promiscuous mode br0: port 2(rai0) entering forwarding state br0: port 2(rai0) entering forwarding state killall: check_status2: no process killed route: SIOC[ADD|DEL]RT: No such device eth2.2: no IPv6 routers present wscd: SSDP UDP PORT = 1900 Invalid command : ledflashstop device wdsi0 is not a slave of br0 device wdsi1 is not a slave of br0 device wdsi2 is not a slave of br0 device wdsi3 is not a slave of br0 device rai0 left promiscuous mode br0: port 2(rai0) entering forwarding state andes_pci_erasefw ==>rlt_wlan_chip_onoff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0x20b, Reg-WlanFunCtrl=0x20b RTMP_TimerListRelease: release timer obj c0892338! RTMP_TimerListRelease: release timer obj c09954cc! RTMP_TimerListRelease: release timer obj c091ad50! RTMP_TimerListRelease: release timer obj c091ad24! RTMP_TimerListRelease: release timer obj c091ad7c! RTMP_TimerListRelease: release timer obj c091acf8! RTMP_TimerListRelease: release timer obj c091a7bc! RTMP_TimerListRelease: release timer obj c08963dc! RTMP_TimerListRelease: release timer obj c0895fc0! RTMP_TimerListRelease: release timer obj c08963ac! RTMP_TimerListRelease: release timer obj c0896754! RTMP_TimerListRelease: release timer obj c08964a4! RTMP_TimerListRelease: release timer obj c08964d4! RTMP_TimerListRelease: release timer obj c0896694! RTMP_TimerListRelease: release timer obj c08966c4! RTMP_TimerListRelease: release timer obj c08996f4! RTMP_TimerListRelease: release timer obj c08992d8! RTMP_TimerListRelease: release timer obj c08996c4! RTMP_TimerListRelease: release timer obj c0899a6c! RTMP_TimerListRelease: release timer obj c08997bc! RTMP_TimerListRelease: release timer obj c08997ec! RTMP_TimerListRelease: release timer obj c08999ac! RTMP_TimerListRelease: release timer obj c08999dc! RTMP_TimerListRelease: release timer obj c089ca0c! RTMP_TimerListRelease: release timer obj c089c5f0! RTMP_TimerListRelease: release timer obj c089c9dc! RTMP_TimerListRelease: release timer obj c089cd84! RTMP_TimerListRelease: release timer obj c089cad4! RTMP_TimerListRelease: release timer obj c089cb04! RTMP_TimerListRelease: release timer obj c089ccc4! RTMP_TimerListRelease: release timer obj c089ccf4! RTMP_TimerListRelease: release timer obj c089fd24! RTMP_TimerListRelease: release timer obj c089f908! RTMP_TimerListRelease: release timer obj c089fcf4! RTMP_TimerListRelease: release timer obj c08a009c! RTMP_TimerListRelease: release timer obj c089fdec! RTMP_TimerListRelease: release timer obj c089fe1c! RTMP_TimerListRelease: release timer obj c089ffdc! RTMP_TimerListRelease: release timer obj c08a000c! RTMP_TimerListRelease: release timer obj c08a303c! RTMP_TimerListRelease: release timer obj c08a2c20! RTMP_TimerListRelease: release timer obj c08a300c! RTMP_TimerListRelease: release timer obj c08a33b4! RTMP_TimerListRelease: release timer obj c08a3104! RTMP_TimerListRelease: release timer obj c08a3134! RTMP_TimerListRelease: release timer obj c08a32f4! RTMP_TimerListRelease: release timer obj c08a3324! RTMP_TimerListRelease: release timer obj c08a6354! RTMP_TimerListRelease: release timer obj c08a5f38! addrconf_dad_completed 7 RTMP_TimerListRelease: release timer obj c08a6324! RTMP_TimerListRelease: release timer obj c08a66cc! RTMP_TimerListRelease: release timer obj c08a641c! RTMP_TimerListRelease: release timer obj c08a644c! RTMP_TimerListRelease: release timer obj c08a660c! RTMP_TimerListRelease: release timer obj c08a663c! RTMP_TimerListRelease: release timer obj c08a966c! RTMP_TimerListRelease: release timer obj c08a9250! RTMP_TimerListRelease: release timer obj c08a963c! RTMP_TimerListRelease: release timer obj c08a99e4! RTMP_TimerListRelease: release timer obj c08a9734! RTMP_TimerListRelease: release timer obj c08a9764! RTMP_TimerListRelease: release timer obj c08a9924! RTMP_TimerListRelease: release timer obj c08a9954! RTMP_TimerListRelease: release timer obj c08ac984! RTMP_TimerListRelease: release timer obj c08ac568! RTMP_TimerListRelease: release timer obj c08ac954! RTMP_TimerListRelease: release timer obj c08accfc! RTMP_TimerListRelease: release timer obj c08aca4c! RTMP_TimerListRelease: release timer obj c08aca7c! RTMP_TimerListRelease: release timer obj c08acc3c! RTMP_TimerListRelease: release timer obj c08acc6c! RTMP_TimerListRelease: release timer obj c091d1d4! RTMP_TimerListRelease: release timer obj c091cdb8! RTMP_TimerListRelease: release timer obj c091d1a4! RTMP_TimerListRelease: release timer obj c091d54c! RTMP_TimerListRelease: release timer obj c091d29c! RTMP_TimerListRelease: release timer obj c091d2cc! RTMP_TimerListRelease: release timer obj c091d204! RTMP_TimerListRelease: release timer obj c091d234! RTMP_TimerListRelease: release timer obj c091d264! RTMP_TimerListRelease: release timer obj c094124c! RTMP_TimerListRelease: release timer obj c094133c! RTMP_TimerListRelease: release timer obj c0941278! RTMP_TimerListRelease: release timer obj c091d8bc! RTMP_TimerListRelease: release timer obj c0893828! RTMP_TimerListRelease: release timer obj c0896b40! RTMP_TimerListRelease: release timer obj c0899e58! RTMP_TimerListRelease: release timer obj c089d170! RTMP_TimerListRelease: release timer obj c08a0488! RTMP_TimerListRelease: release timer obj c08a37a0! RTMP_TimerListRelease: release timer obj c08a6ab8! RTMP_TimerListRelease: release timer obj c08a9dd0! RTMP_TimerListRelease: release timer obj c091d5d0! RTMP_TimerListRelease: release timer obj c09270e4! init wps_status init wps_btn init wpa init ipv6 init v6filter modprobe: module ip6_tables not found modprobe: failed to load module ip6_tables modprobe: module ip6table_filter not found modprobe: failed to load module ip6table_filter modprobe: module ip6table_mangle not found modprobe: failed to load module ip6table_mangle modprobe: module ip6t_rt not found modprobe: failed to load module ip6t_rt modprobe: module ip6t_REJECT not found modprobe: failed to load module ip6t_REJECT init ddnsv6 init hwnat init 3g_status init sip_alg init igmp init reset_btn init ate killall: ated: no process killed init wan_led init recent init httpd init telnetd /usr/bin/telnetd-action: Don't Start telnetd since CSID is set disable ... /usr/bin/telnetd-action start ok flash_open: flash_fd=4 flash_open: flash_fd=4 0, uid: 456789, deuid 0, rtime: 0, challenge: 001b778-d000-4fbf-0009-f75a31000a9b /usr/bin/ataskset: /usr/bin/ataskset: 6: taskset: not found flash_open: flash_fd=4 addrconf_dad_completed 7 # rt2860v2_ap: module license 'unspecified' taints kernel. Length of MAC:6 mac:1c:5f:2b:f3:25:9f: ---- === pAd = c118a000, size = 960336 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 AP Driver version-2.7.1.6 RX DESC a653b000 size = 2048 RTMP_TimerListAdd: add timer obj c11f5638! RTMP_TimerListAdd: add timer obj c119223c! RTMP_TimerListAdd: add timer obj c1191e30! RTMP_TimerListAdd: add timer obj c119220c! RTMP_TimerListAdd: add timer obj c1192548! RTMP_TimerListAdd: add timer obj c1192488! RTMP_TimerListAdd: add timer obj c11924b8! RTMP_TimerListAdd: add timer obj c1195648! RTMP_TimerListAdd: add timer obj c119523c! RTMP_TimerListAdd: add timer obj c1195618! RTMP_TimerListAdd: add timer obj c1195954! RTMP_TimerListAdd: add timer obj c1195894! RTMP_TimerListAdd: add timer obj c11958c4! RTMP_TimerListAdd: add timer obj c1198a54! RTMP_TimerListAdd: add timer obj c1198648! RTMP_TimerListAdd: add timer obj c1198a24! RTMP_TimerListAdd: add timer obj c1198d60! RTMP_TimerListAdd: add timer obj c1198ca0! RTMP_TimerListAdd: add timer obj c1198cd0! RTMP_TimerListAdd: add timer obj c119be60! RTMP_TimerListAdd: add timer obj c119ba54! RTMP_TimerListAdd: add timer obj c119be30! RTMP_TimerListAdd: add timer obj c119c16c! RTMP_TimerListAdd: add timer obj c119c0ac! RTMP_TimerListAdd: add timer obj c119c0dc! RTMP_TimerListAdd: add timer obj c119f26c! RTMP_TimerListAdd: add timer obj c119ee60! RTMP_TimerListAdd: add timer obj c119f23c! RTMP_TimerListAdd: add timer obj c119f578! RTMP_TimerListAdd: add timer obj c119f4b8! RTMP_TimerListAdd: add timer obj c119f4e8! RTMP_TimerListAdd: add timer obj c11a2678! RTMP_TimerListAdd: add timer obj c11a226c! RTMP_TimerListAdd: add timer obj c11a2648! RTMP_TimerListAdd: add timer obj c11a2984! RTMP_TimerListAdd: add timer obj c11a28c4! RTMP_TimerListAdd: add timer obj c11a28f4! RTMP_TimerListAdd: add timer obj c11a5a84! RTMP_TimerListAdd: add timer obj c11a5678! RTMP_TimerListAdd: add timer obj c11a5a54! RTMP_TimerListAdd: add timer obj c11a5d90! RTMP_TimerListAdd: add timer obj c11a5cd0! RTMP_TimerListAdd: add timer obj c11a5d00! RTMP_TimerListAdd: add timer obj c11a8e90! RTMP_TimerListAdd: add timer obj c11a8a84! RTMP_TimerListAdd: add timer obj c11a8e60! RTMP_TimerListAdd: add timer obj c11a919c! RTMP_TimerListAdd: add timer obj c11a90dc! RTMP_TimerListAdd: add timer obj c11a910c! RTMP_TimerListAdd: add timer obj c11ac29c! RTMP_TimerListAdd: add timer obj c11abe90! RTMP_TimerListAdd: add timer obj c11ac26c! RTMP_TimerListAdd: add timer obj c11ac5a8! RTMP_TimerListAdd: add timer obj c11ac4e8! RTMP_TimerListAdd: add timer obj c11ac518! RTMP_TimerListAdd: add timer obj c11af6a8! RTMP_TimerListAdd: add timer obj c11af29c! RTMP_TimerListAdd: add timer obj c11af678! RTMP_TimerListAdd: add timer obj c11af9b4! RTMP_TimerListAdd: add timer obj c11af8f4! RTMP_TimerListAdd: add timer obj c11af924! RTMP_TimerListAdd: add timer obj c11b2ab4! RTMP_TimerListAdd: add timer obj c11b26a8! RTMP_TimerListAdd: add timer obj c11b2a84! RTMP_TimerListAdd: add timer obj c11b2dc0! RTMP_TimerListAdd: add timer obj c11b2d00! RTMP_TimerListAdd: add timer obj c11b2d30! RTMP_TimerListAdd: add timer obj c11b5ec0! RTMP_TimerListAdd: add timer obj c11b5ab4! RTMP_TimerListAdd: add timer obj c11b5e90! RTMP_TimerListAdd: add timer obj c11b61cc! RTMP_TimerListAdd: add timer obj c11b610c! RTMP_TimerListAdd: add timer obj c11b613c! RTMP_TimerListAdd: add timer obj c11b92cc! RTMP_TimerListAdd: add timer obj c11b8ec0! RTMP_TimerListAdd: add timer obj c11b929c! RTMP_TimerListAdd: add timer obj c11b95d8! RTMP_TimerListAdd: add timer obj c11b9518! RTMP_TimerListAdd: add timer obj c11b9548! RTMP_TimerListAdd: add timer obj c11bc6d8! RTMP_TimerListAdd: add timer obj c11bc2cc! RTMP_TimerListAdd: add timer obj c11bc6a8! RTMP_TimerListAdd: add timer obj c11bc9e4! RTMP_TimerListAdd: add timer obj c11bc924! RTMP_TimerListAdd: add timer obj c11bc954! RTMP_TimerListAdd: add timer obj c11bfae4! RTMP_TimerListAdd: add timer obj c11bf6d8! RTMP_TimerListAdd: add timer obj c11bfab4! RTMP_TimerListAdd: add timer obj c11bfdf0! RTMP_TimerListAdd: add timer obj c11bfd30! RTMP_TimerListAdd: add timer obj c11bfd60! RTMP_TimerListAdd: add timer obj c11c2ef0! RTMP_TimerListAdd: add timer obj c11c2ae4! RTMP_TimerListAdd: add timer obj c11c2ec0! RTMP_TimerListAdd: add timer obj c11c31fc! RTMP_TimerListAdd: add timer obj c11c313c! RTMP_TimerListAdd: add timer obj c11c316c! RTMP_TimerListAdd: add timer obj c11cbfa4! RTMP_TimerListAdd: add timer obj c11cc0c0! RTMP_TimerListAdd: add timer obj c11cbfd0! RTMP_TimerListAdd: add timer obj c11c352c! RTMP_TimerListAdd: add timer obj c118f4cc! RTMP_TimerListAdd: add timer obj c11928d8! RTMP_TimerListAdd: add timer obj c1195ce4! RTMP_TimerListAdd: add timer obj c11990f0! RTMP_TimerListAdd: add timer obj c119c4fc! RTMP_TimerListAdd: add timer obj c119f908! RTMP_TimerListAdd: add timer obj c11a2d14! RTMP_TimerListAdd: add timer obj c11a6120! RTMP_TimerListAdd: add timer obj c11a952c! RTMP_TimerListAdd: add timer obj c11ac938! RTMP_TimerListAdd: add timer obj c11afd44! RTMP_TimerListAdd: add timer obj c11b3150! RTMP_TimerListAdd: add timer obj c11b655c! RTMP_TimerListAdd: add timer obj c11b9968! RTMP_TimerListAdd: add timer obj c11bcd74! RTMP_TimerListAdd: add timer obj c11c0180! RTMP_TimerListAdd: add timer obj c11c3240! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 eth2.2: no IPv6 routers present 1. Phy Mode = 9 2. Phy Mode = 9 E2PROM: D0 target power=0xff20 E2PROM: 40 MW Power Delta= 0 3. Phy Mode = 9 AntCfgInit: primary/secondary ant 0/1 Initialize RF Central Registers for E2 !!! Initialize RF Central Registers for E3 !!! Initialize RF Channel Registers for E2 !!! Initialize RF Channel Registers for E3 !!! Initialize RF DCCal Registers for E2 !!! Initialize RF DCCal Registers for E3 !!! D1 = 3, D2 = 8, CalCode = 12 !!! RT6352_Temperature_Init : BBPR49 = 0x3 RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff9 Current Temperature from BBP_R49=0xfffffff7 TX BW Filter Calibration !!! RX BW Filter Calibration !!! LOFT Calibration Done! IQCalibration Start! IQCalibration Done! CH = 0, (gain= 0, phase= 1) IQCalibration Start! IQCalibration Done! CH = 1, (gain= 3, phase=3b) TX IQ Calibration Done! RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff ff 00 00 01 SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l RTMP_TimerListAdd: add timer obj c11c3ab4! Main bssid = 1c:5f:2b:f3:25:9f <==== rt28xx_init, Status=0 0x1300 = 00064380 RTMP_TimerListAdd: add timer obj c103f308! device ra0 entered promiscuous mode br0: port 2(ra0) entering forwarding state br0: port 2(ra0) entering forwarding state addrconf_dad_completed 7 Ralink APSoC Hardware Watchdog Timer Started WatchDog Timer. Started WatchDog Timer. LoadVlaue: 36600 sysclk: 145000000 TIMEOUT: 60 ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x208, Reg-WlanFunCtrl=0x209 build time = 20141115060606a rom patch for E3 IC platform = ALPS hw/sw version = ???? patch version = ? FW Version:0.0.00 Build:1 Build Time:201507311614____ fw for E3 IC RX[0] DESC a7668000 size = 4096 RX[1] DESC a7669000 size = 4096 RTMP_TimerListAdd: add timer obj c0892338! RTMP_TimerListAdd: add timer obj c09954cc! RTMP_TimerListAdd: add timer obj c091ad50! RTMP_TimerListAdd: add timer obj c091ad24! RTMP_TimerListAdd: add timer obj c091ad7c! RTMP_TimerListAdd: add timer obj c091acf8! RTMP_TimerListAdd: add timer obj c091a7bc! RTMP_TimerListAdd: add timer obj c08963dc! RTMP_TimerListAdd: add timer obj c0895fc0! RTMP_TimerListAdd: add timer obj c08963ac! RTMP_TimerListAdd: add timer obj c0896754! RTMP_TimerListAdd: add timer obj c08964a4! RTMP_TimerListAdd: add timer obj c08964d4! RTMP_TimerListAdd: add timer obj c0896694! RTMP_TimerListAdd: add timer obj c08966c4! RTMP_TimerListAdd: add timer obj c08996f4! RTMP_TimerListAdd: add timer obj c08992d8! RTMP_TimerListAdd: add timer obj c08996c4! RTMP_TimerListAdd: add timer obj c0899a6c! RTMP_TimerListAdd: add timer obj c08997bc! RTMP_TimerListAdd: add timer obj c08997ec! RTMP_TimerListAdd: add timer obj c08999ac! RTMP_TimerListAdd: add timer obj c08999dc! RTMP_TimerListAdd: add timer obj c089ca0c! RTMP_TimerListAdd: add timer obj c089c5f0! RTMP_TimerListAdd: add timer obj c089c9dc! RTMP_TimerListAdd: add timer obj c089cd84! RTMP_TimerListAdd: add timer obj c089cad4! RTMP_TimerListAdd: add timer obj c089cb04! RTMP_TimerListAdd: add timer obj c089ccc4! RTMP_TimerListAdd: add timer obj c089ccf4! RTMP_TimerListAdd: add timer obj c089fd24! RTMP_TimerListAdd: add timer obj c089f908! RTMP_TimerListAdd: add timer obj c089fcf4! RTMP_TimerListAdd: add timer obj c08a009c! RTMP_TimerListAdd: add timer obj c089fdec! RTMP_TimerListAdd: add timer obj c089fe1c! RTMP_TimerListAdd: add timer obj c089ffdc! RTMP_TimerListAdd: add timer obj c08a000c! RTMP_TimerListAdd: add timer obj c08a303c! RTMP_TimerListAdd: add timer obj c08a2c20! RTMP_TimerListAdd: add timer obj c08a300c! RTMP_TimerListAdd: add timer obj c08a33b4! RTMP_TimerListAdd: add timer obj c08a3104! RTMP_TimerListAdd: add timer obj c08a3134! RTMP_TimerListAdd: add timer obj c08a32f4! RTMP_TimerListAdd: add timer obj c08a3324! RTMP_TimerListAdd: add timer obj c08a6354! RTMP_TimerListAdd: add timer obj c08a5f38! RTMP_TimerListAdd: add timer obj c08a6324! RTMP_TimerListAdd: add timer obj c08a66cc! RTMP_TimerListAdd: add timer obj c08a641c! RTMP_TimerListAdd: add timer obj c08a644c! RTMP_TimerListAdd: add timer obj c08a660c! RTMP_TimerListAdd: add timer obj c08a663c! RTMP_TimerListAdd: add timer obj c08a966c! RTMP_TimerListAdd: add timer obj c08a9250! RTMP_TimerListAdd: add timer obj c08a963c! RTMP_TimerListAdd: add timer obj c08a99e4! RTMP_TimerListAdd: add timer obj c08a9734! RTMP_TimerListAdd: add timer obj c08a9764! RTMP_TimerListAdd: add timer obj c08a9924! RTMP_TimerListAdd: add timer obj c08a9954! RTMP_TimerListAdd: add timer obj c08ac984! RTMP_TimerListAdd: add timer obj c08ac568! RTMP_TimerListAdd: add timer obj c08ac954! RTMP_TimerListAdd: add timer obj c08accfc! RTMP_TimerListAdd: add timer obj c08aca4c! RTMP_TimerListAdd: add timer obj c08aca7c! RTMP_TimerListAdd: add timer obj c08acc3c! RTMP_TimerListAdd: add timer obj c08acc6c! RTMP_TimerListAdd: add timer obj c091d1d4! RTMP_TimerListAdd: add timer obj c091cdb8! RTMP_TimerListAdd: add timer obj c091d1a4! RTMP_TimerListAdd: add timer obj c091d54c! RTMP_TimerListAdd: add timer obj c091d29c! RTMP_TimerListAdd: add timer obj c091d2cc! RTMP_TimerListAdd: add timer obj c091d204! RTMP_TimerListAdd: add timer obj c091d234! RTMP_TimerListAdd: add timer obj c091d264! RTMP_TimerListAdd: add timer obj c094124c! RTMP_TimerListAdd: add timer obj c094133c! RTMP_TimerListAdd: add timer obj c0941278! RTMP_TimerListAdd: add timer obj c091d8bc! CfgSetCountryRegion():CountryRegion in eeprom was programmed CfgSetCountryRegion():CountryRegion in eeprom was programmed cfg_mode=14 cfg_mode=14 wmode_band_equal(): Band Not Equal! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 default ApCliAPSDCapable[0]=0 pAd->ed_threshold = 90 pAd->ed_false_cca_threshold = 3000 2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f: 50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97: 1. Phy Mode = 49 get_chl_grp:illegal channel (167) get_chl_grp:illegal channel (167) get_chl_grp:illegal channel (169) get_chl_grp:illegal channel (169) get_chl_grp:illegal channel (171) get_chl_grp:illegal channel (171) /home/Laroche/Ra/DWR-118A2/rootfs/src/amit_priv/RalinkRT2860AP/mt7612e_3040/rlt_wifi_ap/../rlt_wifi/chips/mt76x2.c:2899 assert (ad->TxPower[choffset].Channel == 42)failed Country Region from e2p = 6 mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0 mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=0 mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9 mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=13, low_temp_slope=16 mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4 mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=-7, tc_upper_bound=5 mt76x2_get_external_lna_gain::LNA type=0x0, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8c, ALNAGain1=0xffffff8c, ALNAGain2=0xffffff8c 2. Phy Mode = 49 RTMP_TimerListAdd: add timer obj c0893828! RTMP_TimerListAdd: add timer obj c0896b40! RTMP_TimerListAdd: add timer obj c0899e58! RTMP_TimerListAdd: add timer obj c089d170! RTMP_TimerListAdd: add timer obj c08a0488! RTMP_TimerListAdd: add timer obj c08a37a0! RTMP_TimerListAdd: add timer obj c08a6ab8! RTMP_TimerListAdd: add timer obj c08a9dd0! RTMP_TimerListAdd: add timer obj c091d5d0! 3. Phy Mode = 49 andes_pci_fw_init 0x1300 = 00064300 AntCfgInit: primary/secondary ant 0/1 andes_load_cr:cr_type(2) ChipStructAssign(): MT76x2 hook ! RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff ff 00 00 01 RTMP_TimerListAdd: add timer obj c09270e4! mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) mt76x2_calibration(channel = 42) @@@ ed_monitor_exit : ===> @@@ ed_monitor_exit : <=== Main bssid = 1c:5f:2b:f3:25:a0 mt76x2_reinit_agc_gain:original agc_vga0 = 0x48, agc_vga1 = 0x48 mt76x2_reinit_agc_gain:updated agc_vga0 = 0x48, agc_vga1 = 0x48 mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x33, hi_lna1 = 0x33 mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x33, hi_lna1 = 0x33 original vga value(chain0) = 48 original vga value(chain1) = 48 <==== rt28xx_init, Status=0 RTMPDrvOpen(1):Check if PDMA is idle! RTMPDrvOpen(2):Check if PDMA is idle! device rai0 entered promiscuous mode br0: port 3(rai0) entering forwarding state br0: port 3(rai0) entering forwarding state addrconf_dad_completed 7 ra0: no IPv6 routers present rai0: no IPv6 routers present


Revision A1:

CDW57CDL_003 Jboot B895 JRecovery Version R1.2 2015/08/31 17:24 spi device id: ef 40 18 0 0 (40180000) SPI FLASH: W25Q128FV 16M . ...................... Starting kernel @80000000... [ 0.000000] Linux version 4.14.78 (XXX@YYY) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6894+1283-547042398a)) #0 Fri Oct 26 16:35:09 2018 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc) [ 0.000000] MIPS: machine is D-Link DWR-118 A1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=0005d4da [ 0.000000] Readback ErrCtl register=0005d4da [ 0.000000] Memory: 59860K/65536K available (3611K kernel code, 172K rwdata, 840K rodata, 168K init, 207K bss, 5676K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns [ 0.000000] systick: enable autosleep mode [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000009] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.015469] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.087716] pid_max: default: 32768 minimum: 301 [ 0.097107] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.110126] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.129753] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.149232] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.161398] pinctrl core: initialized pinctrl subsystem [ 0.172222] NET: Registered protocol family 16 [ 0.442620] PCI host bridge /pcie@10140000 ranges: [ 0.452011] MEM 0x0000000020000000..0x000000002fffffff [ 0.462385] IO 0x0000000010160000..0x000000001016ffff [ 0.490549] rt2880_gpio 10000600.gpio: registering 24 gpios [ 0.501582] rt2880_gpio 10000600.gpio: registering 24 irq handlers [ 0.514150] rt2880_gpio 10000638.gpio: registering 16 gpios [ 0.525149] rt2880_gpio 10000638.gpio: registering 16 irq handlers [ 0.537718] rt2880_gpio 10000660.gpio: registering 32 gpios [ 0.548717] rt2880_gpio 10000660.gpio: registering 32 irq handlers [ 0.561271] rt2880_gpio 10000688.gpio: registering 1 gpios [ 0.572091] rt2880_gpio 10000688.gpio: registering 1 irq handlers [ 0.584961] PCI host bridge to bus 0000:00 [ 0.592957] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] [ 0.606671] pci_bus 0000:00: root bus resource [io 0xffffffff] [ 0.618402] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.631901] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.648093] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.664957] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 0.678010] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 0.691819] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] [ 0.705319] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] [ 0.718828] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] [ 0.732325] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.745822] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.755673] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 0.774316] clocksource: Switched to clocksource systick [ 0.785916] NET: Registered protocol family 2 [ 0.795307] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.809080] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.821670] TCP: Hash tables configured (established 1024 bind 1024) [ 0.834484] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.845991] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.858665] NET: Registered protocol family 1 [ 0.870002] rt-timer 10000100.timer: maximum frequency is 1220Hz [ 0.882707] Crashlog allocated RAM at address 0x3f00000 [ 0.894788] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.912710] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.924207] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.953559] io scheduler noop registered [ 0.961264] io scheduler deadline registered (default) [ 0.972241] gpio-export gpio_export: 1 gpio(s) exported [ 0.982796] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.996403] console [ttyS0] disabled [ 1.003394] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 1.023169] console [ttyS0] enabled [ 1.023169] console [ttyS0] enabled [ 1.036937] bootconsole [early0] disabled [ 1.036937] bootconsole [early0] disabled [ 1.053373] cacheinfo: Failed to find cpu0 device node [ 1.063641] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.080534] spi spi0.0: force spi mode3 [ 1.099050] m25p80 spi0.0: w25q128 (16384 Kbytes) [ 1.108476] 3 fixed-partitions partitions found on MTD device spi0.0 [ 1.121135] Creating 3 MTD partitions on "spi0.0": [ 1.130685] 0x000000000000-0x000000010000 : "jboot" [ 1.141273] 0x000000010000-0x000000ff0000 : "firmware" [ 1.153885] 2 jimage-fw partitions found on MTD device firmware [ 1.165766] 0x000000010000-0x00000018c2da : "kernel" [ 1.176563] 0x00000018c2da-0x000000ff0000 : "rootfs" [ 1.187249] mtd: device 3 (rootfs) set to be root filesystem [ 1.200023] 1 squashfs-split partitions found on MTD device rootfs [ 1.212404] 0x0000003ab000-0x000000ff0000 : "rootfs_data" [ 1.224030] 0x000000ff0000-0x000001000000 : "config" [ 1.235517] libphy: Fixed MDIO Bus: probed [ 1.252558] gsw: setting port4 to gmac mode [ 1.260987] mtk_soc_eth 10100000.ethernet: generated random MAC address b2:e0:43:50:23:2a [ 1.277462] libphy: mdio: probed [ 1.319458] mtk_soc_eth 10100000.ethernet: connected port 4 to PHY at mdio-bus:04 [uid=02430d91, driver=ICPlus IP1001] [ 1.374008] mtk_soc_eth 10100000.ethernet: connected port 5 to PHY at mdio-bus:05 [uid=02430d91, driver=ICPlus IP1001] [ 1.395416] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver [ 1.407850] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 1.424853] rt2880_wdt 10000120.watchdog: Initialized [ 1.436154] NET: Registered protocol family 10 [ 1.448680] Segment Routing with IPv6 [ 1.456148] NET: Registered protocol family 17 [ 1.465065] 8021q: 802.1Q VLAN Support v1.8 [ 1.481236] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 1.496266] Freeing unused kernel memory: 168K [ 1.505144] This architecture does not have kernel memory protection. [ 2.393308] init: Console is alive [ 2.400419] init: - watchdog - [ 2.553761] random: fast init done [ 3.552469] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.700393] usbcore: registered new interface driver usbfs [ 3.711483] usbcore: registered new interface driver hub [ 3.722208] usbcore: registered new device driver usb [ 3.738282] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.753094] ehci-platform: EHCI generic platform driver [ 3.773938] phy phy-usbphy.0: remote usb device wakeup disabled [ 3.785740] phy phy-usbphy.0: UTMI 16bit 30MHz [ 3.794616] ehci-platform 101c0000.ehci: EHCI Host Controller [ 3.806103] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 3.821998] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 3.844528] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 3.857978] hub 1-0:1.0: USB hub found [ 3.865896] hub 1-0:1.0: 1 port detected [ 3.878529] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.897060] init: - preinit - [ 5.103907] 8021q: adding VLAN 0 to HW filter on device eth0 Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3[ 5.251446] random: procd: uninitialized urandom read (4 bytes read) ] or [4] key and hit [enter] to select the debug level [ 5.562166] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (1000Mbps/Full duplex) [ 7.013218] jffs2: notice: (392) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (0 unchecked, 4 orphan) and 4 of xref (4 dead, 0 orphan) found. [ 7.046154] mount_root: switching to jffs2 overlay [ 7.085050] overlayfs: upper fs does not support tmpfile. [ 7.102074] urandom-seed: Seeding with /etc/urandom.seed [ 7.224696] procd: - early - [ 7.231383] procd: - watchdog - [ 7.317168] mtk_soc_eth 10100000.ethernet eth0: port 4 link down [ 7.646769] procd: - watchdog - [ 7.653444] procd: - ubus - [ 7.701166] random: ubusd: uninitialized urandom read (4 bytes read) [ 7.715271] random: ubusd: uninitialized urandom read (4 bytes read) [ 7.728570] random: ubusd: uninitialized urandom read (4 bytes read) [ 7.742220] procd: - init - Please press Enter to activate this console. [ 8.151254] kmodloader: loading kernel modules from /etc/modules.d/* [ 8.170490] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.194319] Loading modules backported from Linux version v4.19-rc5-0-g6bf4ca7fbc85 [ 8.209649] Backport generated by backports.git v4.19-rc5-1-0-g05571dcd [ 8.227262] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.247260] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 8.325521] xt_time: kernel timezone is -0000 [ 8.411207] PPP generic driver version 2.4.2 [ 8.422684] NET: Registered protocol family 24 [ 8.447413] mt76x0e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4 [ 8.459987] mt76x0e 0000:01:00.0: ASIC revision: 76100002 [ 8.549552] mt76x0e 0000:01:00.0: Firmware Version: 0.1.00 [ 8.645431] mt76x0e 0000:01:00.0: EEPROM ver:01 fae:00 [ 8.705942] ieee80211 phy1: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'. [ 8.797968] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected [ 8.813487] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected [ 8.833378] kmodloader: done loading kernel modules from /etc/modules.d/* [ 10.063486] urandom_read: 5 callbacks suppressed [ 10.063496] random: jshn: uninitialized urandom read (4 bytes read) [ 16.847413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.859111] 8021q: adding VLAN 0 to HW filter on device eth0 [ 16.910021] device eth0 entered promiscuous mode [ 16.938231] br-lan: port 1(eth0.1) entered blocking state [ 16.949067] br-lan: port 1(eth0.1) entered disabled state [ 16.960194] device eth0.1 entered promiscuous mode [ 17.014321] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 17.094883] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready [ 19.228556] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.242690] br-lan: port 1(eth0.1) entered blocking state [ 19.253532] br-lan: port 1(eth0.1) entered forwarding state [ 19.264847] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [ 19.338441] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 19.770700] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (1000Mbps/Full duplex)


Revision A2:

CDW57BDL_003 Jboot B1162 JRecovery Version R1.2 2016/11/07 14:32 spi device id: ef 40 18 0 0 (40180000) SPI FLASH: W25Q128FV 16M . ...................... Starting kernel @80000000... [ 0.000000] Linux version 4.14.78 (XXX@YYY) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6894+972-547042398a)) #0 Mon Oct 29 20:50:13 2018 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc) [ 0.000000] MIPS: machine is D-Link DWR-118 A2 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=0007fc30 [ 0.000000] Readback ErrCtl register=0007fc30 [ 0.000000] Memory: 124832K/131072K available (3611K kernel code, 172K rwdata, 840K rodata, 168K init, 207K bss, 6240K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns [ 0.000000] systick: enable autosleep mode [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000009] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.015469] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.087698] pid_max: default: 32768 minimum: 301 [ 0.097092] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.110112] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.129716] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.149197] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.161363] pinctrl core: initialized pinctrl subsystem [ 0.172189] NET: Registered protocol family 16 [ 0.664383] PCI host bridge /pcie@10140000 ranges: [ 0.673775] MEM 0x0000000020000000..0x000000002fffffff [ 0.684150] IO 0x0000000010160000..0x000000001016ffff [ 0.712197] rt2880_gpio 10000600.gpio: registering 24 gpios [ 0.723233] rt2880_gpio 10000600.gpio: registering 24 irq handlers [ 0.735796] rt2880_gpio 10000638.gpio: registering 16 gpios [ 0.746802] rt2880_gpio 10000638.gpio: registering 16 irq handlers [ 0.759352] rt2880_gpio 10000660.gpio: registering 32 gpios [ 0.770347] rt2880_gpio 10000660.gpio: registering 32 irq handlers [ 0.782927] rt2880_gpio 10000688.gpio: registering 1 gpios [ 0.793753] rt2880_gpio 10000688.gpio: registering 1 irq handlers [ 0.806643] PCI host bridge to bus 0000:00 [ 0.814639] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] [ 0.828353] pci_bus 0000:00: root bus resource [io 0xffffffff] [ 0.840084] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.853584] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.869770] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.886267] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 0.899319] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 0.913130] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] [ 0.926628] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref] [ 0.940993] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] [ 0.954502] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit] [ 0.969045] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref] [ 0.983395] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.993252] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] [ 1.006761] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref] [ 1.026058] clocksource: Switched to clocksource systick [ 1.037658] NET: Registered protocol family 2 [ 1.047047] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 1.060821] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 1.073410] TCP: Hash tables configured (established 1024 bind 1024) [ 1.086233] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.097734] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.110425] NET: Registered protocol family 1 [ 1.121724] rt-timer 10000100.timer: maximum frequency is 1220Hz [ 1.134462] Crashlog allocated RAM at address 0x3f00000 [ 1.146575] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 1.164531] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.176031] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 1.205311] io scheduler noop registered [ 1.213016] io scheduler deadline registered (default) [ 1.224010] gpio-export gpio_export: 1 gpio(s) exported [ 1.234563] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.248197] console [ttyS0] disabled [ 1.255189] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 1.274965] console [ttyS0] enabled [ 1.274965] console [ttyS0] enabled [ 1.288734] bootconsole [early0] disabled [ 1.288734] bootconsole [early0] disabled [ 1.305184] cacheinfo: Failed to find cpu0 device node [ 1.315452] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.332321] spi spi0.0: force spi mode3 [ 1.350930] m25p80 spi0.0: w25q128 (16384 Kbytes) [ 1.360359] 3 fixed-partitions partitions found on MTD device spi0.0 [ 1.373018] Creating 3 MTD partitions on "spi0.0": [ 1.382570] 0x000000000000-0x000000010000 : "jboot" [ 1.393158] 0x000000010000-0x000000ff0000 : "firmware" [ 1.405781] 2 jimage-fw partitions found on MTD device firmware [ 1.417665] 0x000000010000-0x00000018c326 : "kernel" [ 1.428462] 0x00000018c326-0x000000ff0000 : "rootfs" [ 1.439173] mtd: device 3 (rootfs) set to be root filesystem [ 1.451941] 1 squashfs-split partitions found on MTD device rootfs [ 1.464325] 0x000000406000-0x000000ff0000 : "rootfs_data" [ 1.475961] 0x000000ff0000-0x000001000000 : "config" [ 1.487427] libphy: Fixed MDIO Bus: probed [ 1.511023] gsw: setting port4 to gmac mode [ 1.519425] mtk_soc_eth 10100000.ethernet: generated random MAC address 22:5c:52:9b:95:cc [ 1.535926] libphy: mdio: probed [ 1.574796] mtk_soc_eth 10100000.ethernet: connected port 4 to PHY at mdio-bus:00 [uid=01410dd1, driver=Marvell 88E1510] [ 1.596597] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver [ 1.609049] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 1.626059] rt2880_wdt 10000120.watchdog: Initialized [ 1.637343] NET: Registered protocol family 10 [ 1.649869] Segment Routing with IPv6 [ 1.657340] NET: Registered protocol family 17 [ 1.666269] 8021q: 802.1Q VLAN Support v1.8 [ 1.681128] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 1.696156] Freeing unused kernel memory: 168K [ 1.705034] This architecture does not have kernel memory protection. [ 2.589722] init: Console is alive [ 2.596826] init: - watchdog - [ 2.788796] random: fast init done [ 3.796132] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.947042] usbcore: registered new interface driver usbfs [ 3.958146] usbcore: registered new interface driver hub [ 3.968880] usbcore: registered new device driver usb [ 3.984943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.999714] ehci-platform: EHCI generic platform driver [ 4.020518] phy phy-usbphy.0: remote usb device wakeup disabled [ 4.032319] phy phy-usbphy.0: UTMI 16bit 30MHz [ 4.041185] ehci-platform 101c0000.ehci: EHCI Host Controller [ 4.052671] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 4.068580] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 4.089194] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 4.102648] hub 1-0:1.0: USB hub found [ 4.110571] hub 1-0:1.0: 1 port detected [ 4.123170] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.141720] init: - preinit - [ 5.368182] 8021q: adding VLAN 0 to HW filter on device eth0 Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3[ 5.517373] random: procd: uninitialized urandom read (4 bytes read) ] or [4] key and hit [enter] to select the debug level [ 6.667741] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (1000Mbps/Full duplex) [ 7.275854] jffs2: notice: (389) jffs2_build_xattr_subsystem: complete building xattr subsystem, 6 of xdatum (2 unchecked, 4 orphan) and 14 of xref (4 dead, 0 orphan) found. [ 7.309144] mount_root: switching to jffs2 overlay [ 7.349388] overlayfs: upper fs does not support tmpfile. [ 7.367459] urandom-seed: Seeding with /etc/urandom.seed [ 7.500416] procd: - early - [ 7.506360] procd: - watchdog - [ 7.722181] mtk_soc_eth 10100000.ethernet eth0: port 4 link down [ 8.067344] procd: - watchdog - [ 8.073975] procd: - ubus - [ 8.164621] random: ubusd: uninitialized urandom read (4 bytes read) [ 8.209427] random: ubusd: uninitialized urandom read (4 bytes read) [ 8.223289] random: ubusd: uninitialized urandom read (4 bytes read) [ 8.236971] procd: - init - Please press Enter to activate this console. [ 8.666199] kmodloader: loading kernel modules from /etc/modules.d/* [ 8.686076] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.710692] usbcore: registered new interface driver cdc_wdm [ 8.723730] Loading modules backported from Linux version v4.19-rc5-0-g6bf4ca7fbc85 [ 8.739069] Backport generated by backports.git v4.19-rc5-1-0-g05571dcd [ 8.764461] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.784985] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) [ 8.876971] xt_time: kernel timezone is -0000 [ 8.966462] mt76x2e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4 [ 8.979073] mt76x2e 0000:01:00.0: ASIC revision: 76120044 [ 9.251856] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a [ 9.269249] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 [ 9.280241] mt76x2e 0000:01:00.0: Build: 1 [ 9.288392] mt76x2e 0000:01:00.0: Build Time: 201507311614____ [ 9.308797] mt76x2e 0000:01:00.0: Firmware running! [ 9.344330] PPP generic driver version 2.4.2 [ 9.360814] NET: Registered protocol family 24 [ 9.381710] usbcore: registered new interface driver qmi_wwan [ 9.502807] ieee80211 phy1: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'. [ 9.524140] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected [ 9.539679] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected [ 9.645785] kmodloader: done loading kernel modules from /etc/modules.d/* [ 10.666964] urandom_read: 5 callbacks suppressed [ 10.666973] random: jshn: uninitialized urandom read (4 bytes read) [ 17.841347] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.853046] 8021q: adding VLAN 0 to HW filter on device eth0 [ 17.897542] device eth0 entered promiscuous mode [ 17.923872] br-lan: port 1(eth0.1) entered blocking state [ 17.934727] br-lan: port 1(eth0.1) entered disabled state [ 17.945861] device eth0.1 entered promiscuous mode [ 17.997982] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 18.086100] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready [ 20.382983] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.397089] br-lan: port 1(eth0.1) entered blocking state [ 20.407931] br-lan: port 1(eth0.1) entered forwarding state [ 20.419253] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [ 20.500684] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 20.590702] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (1000Mbps/Full duplex)


This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2020/01/27 16:50
  • by tmomas