D-Link DIR-842

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Dual band Wave 2 AC1200 wireless router with 5 gigabit ports.

FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

FIXME

  1. This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
  2. There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
  3. When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it.
  • Please include only model specific information, omit bla,bla and put everything generic into separate articles
  • If you have no time to write certain stuff, link to docs
  • base-system should lead the way, do not explain this again
  • DO NOT provide a complete howto here! Instead groom the general documentation.
Model SoC Comment
DIR-842 A1 RTL8197DN RTL8197DN = Lexra architecture → not supported
DIR-842 B1 RTL8197DN RTL8197DN = Lexra architecture → not supported
DIR-842 R1 RTL8197FS RTL8197FS = MIPS24Kc architecture → not supported
Model VersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
DIR-842C1Qualcomm Atheros QCA956375016128Qualcomm Atheros QCA9563, Qualcomm Atheros QCA9888b/g/na/n/ac-5--
DIR-842C2Qualcomm Atheros QCA956375016128Qualcomm Atheros QCA9563, Qualcomm Atheros QCA9888b/g/na/n/ac-5-1x 2.0
DIR-842C3Qualcomm Atheros QCA956375016128Qualcomm Atheros QCA9563, Qualcomm Atheros QCA9888b/g/na/n/ac-5--

Verified installation procedure with Hardware Revision C3E according to Label at the backside (Just flashing the factory.bin using the browser on the OEM upgrade page did not work at Stock Firmware Version 3.14 any more):

  1. Download factory.bin and sysupgrade.bin, as both will be needed (See https://forum.openwrt.org/t/d-link-dir-842-c3-installation/43094/8) and be sure to actually rename them to these names. The default firmware seems to have problems with too long file names.
  2. Connect your PC to one of the LAN-side ports and configure it to 192.168.0.2 with default gateway configured to 192.168.0.1.
  3. Power the router off.
  4. Press the reset button and keep it pressed while powering the router on again until the power led blinks about once per second.
  5. Go to 192.168.0.1 in your browser. You'll see a quite basic firmware upload form.
  6. Upload the factory.bin.
  7. Do not power-cycle the router. After a while set your PC to 192.168.1.2 with default gateway 192.168.1.1.
  8. Execute the following commands:
scp sysupgrade.bin root@192.168.1.1:/tmp/
ssh root@192.168.1.1
sysupgrade -v /tmp/sysupgrade.bin
ssh root@192.168.1.1
opkg update
opkg install luci
reboot

FIXME Find out flash layout, then add the flash layout table here (copy, paste, modify the example).

Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout.

  1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed.
  2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now.
  3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2.

Specific values needed for tftp

FIXME Enter values for “FILL-IN” below

Bootloader tftp server IPv4 address FILL-IN
Bootloader MAC address (special) FILL-IN
Firmware tftp image Latest OpenWrt release (NOTE: Name must contain “tftp”)
TFTP transfer window FILL-IN seconds
TFTP window start approximately FILL-IN seconds after power on
TFTP client required IP address FILL-IN

generic.sysupgrade

FIXME These are generic instructions. Update with your router's specifics.

  • Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
  • Upload image file for sysupgrade to LuCI
  • Wait for reboot

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:

  • sysupgrade
  • mtd

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

mtd

If sysupgrade does not support this router, use mtd.

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc linux && reboot

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

FIXME Please fill in real values for this device, then remove the EXAMPLEs

The default network configuration is:

Interface Name Description Default configuration
br-lan EXAMPLE LAN & WiFi EXAMPLE 192.168.1.1/24
vlan0 (eth0.0) EXAMPLE LAN ports (1 to 4) EXAMPLE None
vlan1 (eth0.1) EXAMPLE WAN port EXAMPLE DHCP
wl0 EXAMPLE WiFi EXAMPLE Disabled

FIXME Please fill in real values for this device, then remove the EXAMPLEs

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

Port Switch port
Internet (WAN) EXAMPLE 4
LAN 1 EXAMPLE 3
LAN 2 EXAMPLE 2
LAN 3 EXAMPLE 1
LAN 4 EXAMPLE 0

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

FIXME Please fill in real values for this device, then remove the EXAMPLEs

The D-Link DIR-842 has the following buttons:

BUTTON Event
EXAMPLE Reset reset
EXAMPLE Secure Easy Setup ses
EXAMPLE No buttons at all. -

—- datatemplatelist dttpllist —- template: meta:template_datatemplatelist cols : Brand, Model, Versions, Device Type, Availability, Supported Since Commit_git, Supported since Rel, Supported current Rel, Unsupported, Instruction Set, Sub Instruction Set, Bootloader, Platform, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Hardwares, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Power supply, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_ filter : Model=DIR-842


Front:
Insert photo of front of the casing

Back:
Insert photo of back of the casing

Backside label:
Insert photo of backside label

Note: This will void your warranty! Damage to the housing is likely!

The top plate of the case is clipped into the bottom part (flaps are molded into the bottom part of the case, which snap into hinges at the top part of the case) - no screws are used. Use a plastic wedge (e.g. a gap opener like used for mobile phone repairs), insert it at the the side of the case (take care to not lift the top too widely in a first step) and lift the gap opener up gently (assuming that the top / cover plate of the housing is facing upwards as well). By widening the bottom part of the case sideways it is less likely that the hinges of the top part (which the flaps snap into) will break when lifting the top part of the case.

Warming up the plastics with a hair dryer (or similar) may help to avoid the hinges to crack. Do not use brute force - the top case's plastic can crack / break quite easily.

Main PCB:

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

Version B1.0 C3E
Image
Serial connection parameters 38400, 8N1 and no flow control 115200, 8N1 and no flow control

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

B1.0 (Realtek, not supported)

Booting... @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ @ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize @ 0000000h 0c84017h 00000c8h 0000040h 0000017h 0000000h 0000017h 0800000h @ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName @ 0010000h 0000080h 0001000h 0000800h 0000100h 0000010h 000002dh GD25Q64 @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Boot code version : 1.00B01 Model name : DIR-842 HW version : B1 ---RealTek(RTL8196D)at 2015.10.27-16:01+0800 v1.1 [16bit](659MHz) Jump to image start=0x80500000... decompressing kernel: Uncompressing Linux... done, booting the kernel. done decompressing kernel. start address: 0x80003430 Realtek WLAN driver - version 1.6 (2013-02-21) DFS function - version 1.0.22 Adaptivity function - version 7.1 8812 mp chip !! ####################################################### SKB_BUF_SIZE=3600 MAX_SKB_NUM=768 ####################################################### ####################################################### SKB_BUF_SIZE=3600 MAX_SKB_NUM=768 ####################################################### Probing RTL8186 10/100 NIC-kenel stack size order[3]... chip name: 8196C, chip revid: 0 NOT YET eth0 added. vid=9 Member port 0x1... eth1 added. vid=8 Member port 0x10... eth2 added. vid=9 Member port 0x2... eth3 added. vid=9 Member port 0x4... eth4 added. vid=9 Member port 0x8... eth5 added. vid=9 Member port 0x0... [peth0] added, mapping to [eth1]... Realtek FastPath:v1.03 init started: BusyBox v1.13.4 (2016-10-14 11:04:55 CST) mount: mounting /dev/mtdblock6 on /pdata failed: No such device mount: mounting usbfs on /proc/bus/usb failed: No such file or directory cmd write Write memory 0xb8021054 dat 0x186a0: 0x0 cmd write Write memory 0xb8021054 dat 0x100000: 0x0 mount flash ok mount pdata fail ... getFileSize: No such device Unlocking /dev/mtd6 ... Could not open mtd device: /dev/mtd6 # sh: eval: line 1: Usage:: not found sh: null: not found sh: eval: line 1: Usage:: not found sh: null: not found sh: eval: line 1: Usage:: not found sh: null: not found sh: eval: line 1: Usage:: not found sh: null: not found [707 |707 ncc_rtk3_hwcfg.c : 396 gen_default_pinc()]:::WPS PIN is secure, good!! [707 |707 ncc_rtcfg.c : 819 ncc_init_rtcfg()]:::Init Run-Time Config Success. [707 |707 ncc_rtcfg.c : 820 ncc_init_rtcfg()]:::Total 11338 nodes, each node 24 bytes. [707 |707 ncc_rtcfg.c : 821 ncc_init_rtcfg()]:::Total 272112 byte for all nodes. [707 |707 ncc_rtcfg.c : 822 ncc_init_rtcfg()]:::Total 267891 byte for data. [707 |707 ncc_rtcfg.c : 1488 ncc_load_rtcfg_decompress()]:::CONFSIGNATURE = CACA/CACA [707 |707 ncc_rtcfg.c : 1500 ncc_load_rtcfg_decompress()]:::Load Success(/var/tmp/cfg.txt) [1069 |1069 ncc_inf.c : 285 inf_handler()]:::[1069|1069]Thread Create[inf_handler] [1075 |1075 leobox_timer.c : 283 timerThread()]:::[1075|1075]Thread Create[timerThread] [1075 |1075 leobox_timer.c : 291 timerThread()]:::Timer Thread Running [1076 |1076 ncc_event.c : 772 ncc_event_routing()]:::[1076|1076]Thread Create[ncc_event_routing] killall: crond: no process killed Jan 1 00:00:21 crond[1084]: crond (busybox 1.13.4) started, log level 8 [707 |707 ncc_dns.c : 710 ncc_dns_init()]:::Each DnsInfo need 548 bytes [707 |707 main.c : 529 main()]:::Start BulK Agent Info [Type]0x0001[Length]7[Value]DIR-842 [Type]0x0002[Length]2[Value]B1 [Type]0x0003[Length]2[Value]WW [Type]0x0004[Length]1[Value]0 [Type]0x0005[Length]9[Value]2.03MTb02 [Type]0x0006[Length]1[Value]1 don't exist default language pack!! [Type]0x0007[Length]7[Value]DISABLE [Type]0x0008[Length]17[Value]78:32:1b:90:d3:d6 [Type]0x0009[Length]17[Value]78:32:1b:90:d3:d5 [Type]0x000A[Length]17[Value]78:32:1b:90:d3:d5 [Type]0x000B[Length]17[Value]78:32:1b:90:d3:d7 [Type]0x000C[Length]4[Value]0x30 [Type]0x0010[Length]10[Value]dlink-D3D5 [Type]0x0011[Length]15[Value]dlink-D3D5-5GHz [Type]0x0012[Length]10[Value]zxxva94380 [Type]0x0014[Length]10[Value]0xD7F947F4 [Type]0x0015[Length]8[Value]72180044 [Type]0x0018[Length]13[Value]SN20FAB000001 [Type]0x0019[Length]0[Value] [Type]0x001A[Length]12[Value]2017B0106482 [707 |707 main.c : 531 main()]:::End BulK Agent Info [707 |707 main.c : 538 main()]:::Ncc ready now(707) build 9e0d4a Jan 1 00:00:22 crond[1104]: crond (busybox 1.13.4) started, log level 8 [5279 |5279 main.c : 363 ncc_boot_check()]:::salf booting... [707 |707 ncc_fsm_router.c : 1623 ncc_router_mode_boot()]:::Start ncc_router_mode_boot(0) [707 |707 ncc_gpl_ntpclient.c : 463 mySpStart()]:::Wan is not ready, don't start ntpclient. language pack exists... do language merge... [5335 |5335 lang_merge.c : 1154 main()]:::before print info [5335 |5335 lang_merge.c : 1157 main()]:::Parameters: ori_lang_fp: /var/tmp/lang.js def_lang_fp: /www/js/i18n_en.js The input file is not a correct js file!! Exit program. ####################################################### NUM_RX_PKTHDR_DESC= 1412, eth_skb_free_num= 1550 ####################################################### [707 |707 ncc_rtk_wlan.c : 3074 mySpConf()]:::Config instance 1 wlan1 [707 |707 ncc_rtk_wlan.c : 3015 mySpStart()]:::Start instance 1 wlan1 conf_addr=6a4f88 [PHY_REG_8192Emp] [AGC_TAB_8192Emp] [RadioA_8192Emp] [RadioB_8192Emp] [707 |707 ncc_l2.c : 1356 ncc_L2_wlan_process()]:::op = 0 index = 1 [707 |707 ncc_rtk_wlan.c : 3074 mySpConf()]:::Config instance 2 wlan1-va0 [707 |707 ncc_rtk_wlan.c : 3015 mySpStart()]:::Start instance 2 wlan1-va0 conf_addr=6a5b18 [707 |707 ncc_l2.c : 1356 ncc_L2_wlan_process()]:::op = 0 index = 2 [707 |707 ncc_rtk_wlan.c : 3074 mySpConf()]:::Config instance 5 wlan0 [707 |707 ncc_rtk_wlan.c : 3015 mySpStart()]:::Start instance 5 wlan0 conf_addr=6a66a8 <=== FirmwareDownload8812() [707 |707 ncc_l2.c : 1356 ncc_L2_wlan_process()]:::op = 0 index = 5 [707 |707 ncc_rtk_wlan.c : 3074 mySpConf()]:::Config instance 6 wlan0-va0 [707 |707 ncc_rtk_wlan.c : 3015 mySpStart()]:::Start instance 6 wlan0-va0 conf_addr=6a7238 [707 |707 ncc_l2.c : 1356 ncc_L2_wlan_process()]:::op = 0 index = 6 [PHY_REG_8192Emp] [AGC_TAB_8192Emp] [RadioA_8192Emp] [RadioB_8192Emp] <=== FirmwareDownload8812() [707 |707 ncc_fsm_callback.c : 1119 fsm_state_handle()]:::state 1 enter fsm_state_handle() [707 |707 ncc_fsm_callback.c : 1142 fsm_state_handle()]:::LAN 1 br0 Up setMIB end... bind to interface br0 bind to interface lo activate ipv6 interfaces 0. br0 1. lo mDNSResponderPosix: Starting in daemon mode [707 |707 ncc_gpl_udhcpd.c : 784 probeRouterUdhcpd()]:::queryDOMAINInfo FALSE!!! killall: proxy: no process killed [707 |707 ncc_iptable.c : 1136 reBuildMAC()]:::DEBUG!! killall: proxy: no process killed iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). [707 |707 ncc_gpl_miniupnpd.c : 62 mySpStart()]:::conf->enable = false [1076 |1076 ncc_gpl_udhcpd.c : 141 bc_send()]:::bcu_feedback error [707 |707 ncc_lan.c : 433 probeIPv6Lanst()]:::PD not get yet [707 |707 ncc_fsm_callback.c : 1119 fsm_state_handle()]:::state 1 enter fsm_state_handle() [707 |707 ncc_fsm_callback.c : 1142 fsm_state_handle()]:::LAN 1 br0 Up [707 |707 ncc_lan.c : 433 probeIPv6Lanst()]:::PD not get yet [707 |707 ncc_lan.c : 1086 nccLanv6ServiceStart()]:::[Derek Debug]is_linklocal_DAD_fail Start [707 |707 ncc_lan.c : 1095 nccLanv6ServiceStart()]::: mode.type=3 MLD Proxy v1.2 (2016.10.14-03:06+0000). [707 |707 ncc_gpl_miniupnpd.c : 62 mySpStart()]:::conf->enable = false [707 |707 ncc_fsm_router.c : 1976 ncc_router_mode_boot()]:::No WAN Cable Connection, by pass WAN state machine start killall: wscd: no process killed killall: iwcontrol: no process killed rm: cannot remove '/var/run/wscd*.pid': No such file or directory [SYS][ 707 ncc_fsm_router.c : 2216 ncc_router_mode_boot()]:::Boot complete, device is Running now. [707 |707 ncc_fsm_router.c : 2231 ncc_router_mode_boot()]:::Finish ncc_router_mode_boot() [707 |707 ncc_fsm_router.c : 2233 ncc_router_mode_boot()]:::===== Types Info ===== [707 |707 ncc_fsm_router.c : 2234 ncc_router_mode_boot()]:::sizeof(short) 2 [707 |707 ncc_fsm_router.c : 2235 ncc_router_mode_boot()]:::sizeof(int) 4 [707 |707 ncc_fsm_router.c : 2236 ncc_router_mode_boot()]:::sizeof(long) 4 [707 |707 ncc_fsm_router.c : 2237 ncc_router_mode_boot()]:::sizeof(time_t) 4


C3 EU (ath79)

▒ U-Boot 1.1.4 (Feb 14 2017 - 10:15:54) SVN revision: 1372 ap152 - Dragonfly 1.0DRAM: sri ath_ddr_initial_config(278): (ddr2 init) ath_sys_frequency: cpu 775 ddr 650 ahb 258 Tap values = (0x11, 0x11, 0x11, 0x11) 128 MB Top of RAM usable for U-Boot at: 88000000 Reserving 236k for U-Boot at: 87fc4000 Reserving 192k for malloc() at: 87f94000 Reserving 44 Bytes for Board Info at: 87f93fd4 Reserving 36 Bytes for Global Data at: 87f93fb0 Reserving 128k for boot params() at: 87f73fb0 Stack Pointer at: 87f73f98 Now running in RAM - U-Boot at: 87fc4000 Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18 flash size 16MB, sector count = 256 Flash: 16 MB Power up PLL with outdiv = 0 then switch to 3 In: serial Out: serial Err: serial Net: ath_gmac_enet_initialize... No valid address in Flash. Using fixed address ath_gmac_enet_initialize: reset mask:c02200 athr_mgmt_init ::done Dragonfly ----> S17 PHY * athrs17_reg_init: complete SGMII in forced mode athr_gmac_sgmii_setup SGMII done : cfg1 0x80000000 cfg2 0x7114 eth0: 00:03:7f:09:0b:ad eth0 up eth0 Setting 0x181162c0 to 0x4b962100 Hit any key to stop autoboot: 0 Reset button released ## Booting image at 9f080040 ... Image Name: MIPS Seattle Linux-3.3.8 Created: 2019-02-26 7:20:20 UTC Image Type: MIPS Linux Multi-File Image (lzma compressed) Data Size: 1234373 Bytes = 1.2 MB Load Address: 80060000 Entry Point: 80060000 Contents: Image 0: 1234365 Bytes = 1.2 MB Verifying Checksum at 0x9f080080 ...OK Uncompressing Multi-File Image ... OK No initrd ## Transferring control to Linux (at address 80060000) ... ## Giving linux memsize in bytes, 134217728 Starting kernel ... [ 0.000000] Linux version 3.3.8 (bill@cdWSCMPL03) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Feb 26 14:43:01 CST 2019 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019750 (MIPS 74Kc) [ 0.000000] SoC: Qualcomm Atheros QCA956X rev 0 [ 0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00008000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00008000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: board=AP152 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),64k(misc),15680k(upgrade),64k(art),64k(alpha_boarddata),16m@0(rootfs)ro root=/dev/mtdblock8 init=/sbin/init noinitrd crashkernel=10M@20M [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 125736k/131072k available (2683k kernel code, 5336k reserved, 668k data, 208k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:83 [ 0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.060000] pid_max: default: 32768 minimum: 301 [ 0.060000] Mount-cache hash table entries: 512 [ 0.060000] Performance counters: mips/74K PMU enabled, 4 32-bit counters available to each CPU, irq 13 [ 0.070000] NET: Registered protocol family 16 [ 0.080000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79 [ 0.080000] MIPS: machine is Qualcomm Atheros AP152 reference board [ 0.090000] [ 0.090000] WLAN firmware dump buffer allocation of 2097152 bytes @ address 0x87a00000- SUCCESS !!! [ 0.100000] registering PCI controller with io_map_base unset [ 0.310000] bio: create slab <bio-0> at 0 [ 0.310000] PCI host bridge to bus 0000:00 [ 0.320000] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff] [ 0.320000] pci_bus 0000:00: root bus resource [io 0x0001] [ 0.330000] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] [ 0.330000] pci 0000:00:00.0: using irq 40 for pin 1 [ 0.340000] Switching to clocksource MIPS [ 0.340000] NET: Registered protocol family 2 [ 0.350000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.350000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.360000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.360000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.370000] TCP reno registered [ 0.370000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.380000] NET: Registered protocol family 1 [ 0.400000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.400000] msgmni has been set to 245 [ 0.410000] io scheduler noop registered [ 0.410000] io scheduler deadline registered (default) [ 0.530000] HDLC line discipline maxframe=4096 [ 0.530000] N_HDLC line discipline registered. [ 0.540000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.560000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A [ 0.570000] console [ttyS0] enabled, bootconsole disabled [ 0.570000] console [ttyS0] enabled, bootconsole disabled [ 0.580000] m25p80 spi0.0: found w25q128, expected m25p80 [ 0.590000] m25p80 spi0.0: w25q128 (16384 Kbytes) [ 0.590000] 9 cmdlinepart partitions found on MTD device spi0.0 [ 0.600000] spi0.0: the flash image has SEAMA header [ 0.610000] spi0.0: squashfs filesystem found at offset 0x001b0060 [ 0.610000] Creating 10 MTD partitions on "spi0.0": [ 0.620000] 0x000000000000-0x000000040000 : "u-boot" [ 0.620000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.630000] 0x000000050000-0x000000060000 : "devdata" [ 0.640000] 0x000000060000-0x000000070000 : "devconf" [ 0.640000] 0x000000070000-0x000000080000 : "misc" [ 0.650000] 0x000000080000-0x000000fd0000 : "upgrade" [ 0.660000] 0x000000fd0000-0x000000fe0000 : "art" [ 0.660000] 0x000000fe0000-0x000000ff0000 : "alpha_boarddat" [ 0.670000] 0x0000001b0060-0x000000aff060 : "rootfs" [ 0.680000] mtd: partition "rootfs" set to be root filesystem [ 0.680000] 0x000000000000-0x000001000000 : "flash" [ 0.690000] m25p80 spi0.1: found pm25lv512, expected m25p80 [ 0.690000] m25p80 spi0.1: pm25lv512 (64 Kbytes) [ 0.840000] ag71xx_mdio: probed [ 0.840000] eth0: Atheros AG71xx at 0xb9000000, irq 4 [ 1.420000] eth0: Atheros AR8327 switch driver attached. [ 4.330000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316] [ 4.340000] PPP generic driver version 2.4.2 [ 4.350000] PPP BSD Compression module registered [ 4.350000] PPP MPPE Compression module registered [ 4.360000] NET: Registered protocol family 24 [ 4.360000] PPTP driver version 0.8.5 [ 4.370000] u32 classifier [ 4.370000] Netfilter messages via NETLINK v0.30. [ 4.370000] nf_conntrack version 0.5.0 (1964 buckets, 7856 max) [ 4.380000] xt_time: kernel timezone is -0000 [ 4.380000] GRE over IPv4 demultiplexor driver [ 4.390000] GRE over IPv4 tunneling driver [ 4.390000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.400000] TCP cubic registered [ 4.400000] NET: Registered protocol family 10 [ 4.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.420000] IPv6 over IPv4 tunneling driver [ 4.420000] NET: Registered protocol family 17 [ 4.430000] Ebtables v2.0 registered [ 4.430000] L2TP core driver, V2.0 [ 4.430000] PPPoL2TP kernel driver, V2.0 [ 4.440000] 8021q: 802.1Q VLAN Support v1.8 [ 4.440000] ### of_selftest(): No testcase data in device tree; not running tests [ 4.450000] VFS: Mounted root (squashfs filesystem) readonly on device 31:8. [ 4.460000] Freeing unused kernel memory: 208k freed starting pid 845, tty '': '/etc/init.d/rcS' [/etc/init.d/S10init.sh] [/etc/init.d/S15udevd.sh] [ 5.270000] udevd (856): /proc/856/oom_adj is deprecated, please use /proc/856/oom_score_adj instead. [/etc/init.d/S16ipv6.sh] Set DEFAULT policy as DROP. [/etc/init.d/S19init.sh] [/etc/init.d/S20init.sh] DEFNODE[/etc/defnodes/S11devdata.xml] DEFNODE[/etc/defnodes/S12devdata.php] DEFNODE[/etc/defnodes/S13dfs.php] DEFNODE[/etc/defnodes/S14setchlist.php] DEFNODE[/etc/defnodes/S20device.xml] DEFNODE[/etc/defnodes/S22timezone.php] [/etc/scripts/setdate.sh] 01/01/2000 ... Sat Jan 1 00:00:08 UTC 2000 DEFNODE[/etc/defnodes/S30device.php] DEFNODE[/etc/defnodes/S30device.xml] DEFNODE[/etc/defnodes/S31diagnostic.xml] DEFNODE[/etc/defnodes/S31locale.php] DEFNODE[/etc/defnodes/S33wifi.php] DEFNODE[/etc/defnodes/S40device.xml] DEFNODE[/etc/defnodes/S80mtfwu.php] DEFNODE[/etc/defnodes/S90opendns.php] DEFNODE[/etc/defnodes/S90sessions.php] DEFNODE[/etc/defnodes/S90sessions_privatekey.php] DEFNODE[/etc/defnodes/S90upnpigd.php] DEFNODE[/etc/defnodes/S90upnpwfa.php] DEFNODE[/etc/defnodes/S91upnpigd2.php] DEFNODE[/etc/defnodes/S94captcha.php] SERVD: start service [LOGD] [/etc/init.d/S20interfaces.sh] [ 9.120000] ssdk_plat_init start [ 9.130000] Register QCA PHY driver [ 9.130000] PHY ID is 0x4dd036 [ 9.240000] qca probe f1 phy driver succeeded! [ 9.240000] qca-ssdk module init succeeded! [ 9.310000] fast-classifier: starting up [ 9.310000] fast-classifier: registered net.netfilter.nf_conntrack_acct = 1 SSDK Init OK![ 9.430000] enable:1 [ 9.440000] bg task init successfull! [ 9.440000] host_helper_init start [ 9.450000] /proc/qca_switch/nf_athrs17_hnat is created [ 9.460000] /proc/qca_switch/nf_athrs17_hnat_wan_type is created [ 9.470000] /proc/qca_switch/nf_athrs17_hnat_ppp_id is created [ 9.470000] /proc/qca_switch/nf_athrs17_hnat_udp_thresh is created [ 9.480000] /proc/qca_switch/nf_athrs17_hnat_wan_ip is created [ 9.480000] /proc/qca_switch/nf_athrs17_hnat_ppp_peer_ip is created [ 9.490000] /proc/qca_switch/nf_athrs17_hnat_ppp_peer_mac is created [ 9.500000] /proc/qca_switch/nf_athrs17_hnat_wan_mac is created [ 9.500000] /proc/qca_switch/nf_athrs17_hnat_ppp_id2 is created [ 9.510000] /proc/qca_switch/nf_athrs17_hnat_ppp_peer_mac is created [ 9.520000] /proc/qca_switch/nf_athrs17_hnat_thres_base is created [ 9.520000] /proc/qca_switch/nf_athrs17_hnat_poll_msec is created [ 9.530000] /proc/qca_switch/nf_athrs17_hnat_aging_sec is created [ 9.530000] Registering IPv6 hooks... [ 9.540000] Adding ACL rules 15 - upnp_ssdp_add_acl_rules [ 9.570000] ACL is not yet enabled. Enabling... [ 9.580000] Adding ACL rules 7 - ipv6_snooping_solicted_node_add_acl_rules [ 9.640000] Adding ACL rules 11 - ipv6_snooping_sextuple0_group_add_acl_rules [ 9.710000] Adding ACL rules 13 - ipv6_snooping_quintruple0_1_group_add_acl_rules [ 9.770000] nat wan port is 20 [ 9.780000] Hello, nat helper module for 1.1! operate done. [/etc/init.d/S23udevd.sh] [/etc/init.d/S45gpiod.sh] SSDK Init OK! operate done. [/etc/init.d/rcS] done! [/etc/init0.d/S21layout.sh]: start ... SERVD: start service [LAYOUT] cat: can't open '/etc/config/langpack': No such file or directory [/etc/init0.d/S40event.sh]: start ... [ 10.560000] ADDRCONF(NETDEV_UP): eth0: link is not ready SERVD: event [SEALPAC.LOAD/default] [/etc/init0.d/S40gpioevent.sh]: start ... SEAMA: need meta for searching image. [/etc/init0.d/S40ttyevent.sh]: start ... [/etc/init0.d/S41autowan.sh]: start ... [/etc/init0.d/S41autowanv6.sh]: start ... SERVD: event [AUTODETECT.REVERT/default] [/etc/init0.d/S41event.sh]: start ... [/etc/init0.d/S41factorydefault.sh]: start ... sh: missing ] [/etc/init0.d/S41inf.sh]: start ... [/etc/init0.d/S41smart404.sh]: start ... SSDK Init OK! operate done. SSDK Init OK! operate done. [ 11.370000] device eth0 entered promiscuous mode [ 11.410000] ADDRCONF(NETDEV_UP): eth0.1: link is not ready [ 11.420000] ADDRCONF(NETDEV_UP): eth0.4094: link is not ready [ 11.440000] device eth0.1 entered promiscuous mode [ 11.470000] ADDRCONF(NETDEV_UP): br0: link is not ready SERVD: start service [BRIDGE] [/etc/init0.d/S42pthrough.sh]: start ... [/etc/init0.d/S43checkfw.sh]: start ... [ephp.c read_cond_list 1363] PHP operator precedence issue at: /etc/services/BRIDGE.php, cond_qty: 3, and_qty: 1, or_qty: 1 BRIDGE: The device is not in the bridge mode. SERVD: start service [LAN] [/etc/init0.d/S44schreboot.sh]: start ... [/etc/init0.d/S51wlan.sh]: start ... [ephp.c read_cond_list 1363] PHP operator precedence issue at: /etc/services/LAN.php, cond_qty: 3, and_qty: 1, or_qty: 1 377+0 records in 377+0 records out [/etc/init0.d/S65ddnsd.sh]: start ... [/etc/init0.d/S65logd.sh]: start ... [/etc/init0.d/S65user.sh]: start ... SERVD: start service [WAN] [/etc/init0.d/S80mfcd.sh]: start ... main: creating usock for control : [/var/run/ddnsd.susock] [ 12.390000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.400000] eth0: link up (1000Mbps/Full duplex) [ephp.c read_cond_list 1363] PHP operator precedence issue at: /etc/services/WAN.php, cond_qty: 3, and_qty: 1, o[ 12.430000] ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready r_qty: 1 [ 12.430000] br0: port 1(eth0.1) entered forwarding state [ 12.440000] br0: port 1(eth0.1) entered forwarding state [ 12.450000] ADDRCONF(NETDEV_CHANGE): eth0.4094: link becomes ready [ 12.450000] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready killall: mfcd: no process killed [/etc/init0.d/S80vlan.sh]: start ... [/etc/init0.d/S88arp.sh]: start ... run arpmonitor again [/etc/init0.d/S91proclink.sh]: start ... [/etc/init0.d/S93cpuload.sh]: start ... [/etc/init0.d/S95watchdog.sh]: start ... [/etc/init0.d/rcS] done! Please press Enter to activate this console. SERVD: start service [PHYINF.ETH-1] SERVD: start service [PHYINF.ETH-2] SERVD: start service [PHYINF.ETH-3] SSDK Init OK! operate done. SSDK Init OK! operate done. SERVD: start service [DEVICE.PASSTHROUGH] [ 14.110000] device eth0.4094 entered promiscuous mode [ 14.120000] pppoe pass through (br0<->eth0.4094) SERVD: start service [IPTABLES] CONNTRACK_MAX=30000 CONNTRACK_MIN=15000 [ 14.420000] br0: port 1(eth0.1) entered disabled state SERVD: start service [IP6TABLES] SERVD: start service [SCH_REBOOT] SERVD: start service [WIFI.PHYINF] SERVD: service [WIFI.PHYINF] return error 108. SERVD: start service [IPTABLES] SERVD: service [IPTABLES] is already started. SERVD: start service [IP6TABLES] SERVD: service [IP6TABLES] is already started. SERVD: start service [INET.LAN-1] [/var/servd/INET.LAN-1_start.sh]: starting LAN-1... SERVD: event [LAN-1.UP/default] /var/run/phpsh-1963.sh: line 8: can't create /proc/nf_accelerate_to_local: nonexistent directory SERVD: event [DHCPS4.RESTART/default] [/var/servd/INET.LAN-1_start.sh]: starting LAN-1 done !!! SERVD: start service [INET.LAN-2] [/var/servd/INET.LAN-2_start.sh]: starting LAN-2... SERVD: event [LAN-2.UP/default] SERVD: event [DHCPS4.RESTART/default] [/var/servd/INET.LAN-2_start.sh]: starting LAN-2 done !!! SERVD: start service [INET.LAN-4] #!/bin/sh # No inet profile!! exit 9 SERVD: start service [INET.LAN-5] #!/bin/sh # No inet profile!! exit 9 SERVD: start service [INET.LAN-6] ifsetup: (LAN-6) not active. SERVD: service [INET.LAN-6] return error 8. SERVD: start service [INET.LAN-7] ifsetup: (LAN-7) not active. SERVD: service [INET.LAN-7] return error 8. SERVD: start service [INET.LAN-8] ifsetup: (LAN-8) not active. SERVD: service [INET.LAN-8] return error 8. SERVD: start service [IPTMACCTRL] SERVD: start service [IPTURLCTRL] SERVD: start service [ACCESSCTRL] SERVD: start service [IPTPORTT] SERVD: start service [IP6T.LAN-1] SERVD: start service [IP6T.LAN-2] SERVD: start service [IP6T.LAN-3] SERVD: start service [PHYINF.WIFI] SERVD: start service [IP6T.LAN-4] SERVD: start service [IP6T.LAN-5] SERVD: stop service [LOGD] SERVD: start service [LOGD] SERVD: start service [IP6T.LAN-6] SERVD: start service [IP6T.LAN-7] SERVD: service [IP6T.LAN-7] return error 108. SERVD: start service [DEVICE.ACCOUNT] SERVD: start service [IP6T.LAN-8] SERVD: service [IP6T.LAN-8] return error 108. SERVD: start service [IPTABLES] SERVD: service [IPTABLES] is already started. SERVD: start service [IP6TABLES] SERVD: service [IP6TABLES] is already started. SERVD: start service [INET.WAN-1] [/var/servd/INET.WAN-1_start.sh]: starting WAN-1... SSDK Init OK! operate done. [/var/servd/INET.WAN-1_start.sh]: starting WAN-1 done !!! SERVD: start service [DEVICE.VLAN] START.sh:VLAN is disabled SERVD: start service [INET.WAN-2] ifsetup: (WAN-2) not active. SERVD: service [INET.WAN-2] return error 8. SERVD: start service [INET.WAN-3] [/var/servd/INET.WAN-3_start.sh]: starting WAN-3... WAN-3 a is link local interface. SERVD: event [WAN-3.UP/default] [/var/servd/INET.WAN-3_start.sh]: starting WAN-3 done !!! SERVD: start service [INET.WAN-4] ifsetup: (WAN-4) not active. SERVD: service [INET.WAN-4] return error 8. SERVD: start service [INET.WAN-5] ifsetup: (WAN-5) not active. SERVD: service [INET.WAN-5] return error 8. SERVD: start service [INET.WAN-6] ifsetup: (WAN-6) not active. SERVD: service [INET.WAN-6] return error 8. SERVD: start service [INET.WAN-7] ifsetup: (WAN-7) not active. SERVD: service [INET.WAN-7] return error 8. SERVD: start service [INET.WAN-8] ifsetup: (WAN-8) not active. SERVD: service [INET.WAN-8] return error 8. SERVD: start service [IPTDEFCHAIN] [ephp.c read_cond_list 1363] PHP operator precedence issue at: /etc/services/IPTDEFCHAIN.php, cond_qty: 3, and_qty: 1, or_qty: 1 [ephp.c read_cond_list 1363] PHP operator precedence issue at: /etc/services/IPTDEFCHAIN.php, cond_qty: 3, and_qty: 1, or_qty: 1 insmod: can't insert '/lib/modules/nf_conntrack_ipsec_pass.ko': No such file or directory insmod: can't insert '/lib/modules/nf_conntrack_rtsp.ko': No such file or directory insmod: can't insert '/lib/modules/nf_nat_rtsp.ko': No such file or directory SERVD: start service [IPTMASQ] SERVD: start service [IPTVSVR] SERVD: start service [IPTPFWD] SERVD: start service [IPTPORTT] SERVD: service [IPTPORTT] is already started. SERVD: start service [IPTDMZ] SERVD: start service [IPT.WAN-1] SERVD: start service [IP6T.WAN-1] SERVD: start service [IPT.WAN-2] SERVD: start service [IP6T.WAN-2] SERVD: start service [IPT.WAN-3] SERVD: start service [IP6T.WAN-3] SERVD: start service [IPT.WAN-4] SERVD: start service [IP6T.WAN-4] SERVD: start service [IPT.WAN-5] SERVD: service [IPT.WAN-5] return error 108. SERVD: start service [IP6T.WAN-5] SERVD: service [IP6T.WAN-5] return error 108. SERVD: start service [IPT.WAN-6] SERVD: service [IPT.WAN-6] return error 108. SERVD: start service [IP6T.WAN-6] SERVD: service [IP6T.WAN-6] return error 108. SERVD: start service [IPT.WAN-7] SERVD: start service [IP6T.WAN-7] SERVD: service [IP6T.WAN-7] return error 108. SERVD: start service [IPT.WAN-8] SERVD: start service [IP6T.WAN-8] SERVD: service [IP6T.WAN-8] return error 108. SERVD: stop service [IPT.LAN-1] SERVD: service [IPT.LAN-1] is already stopped. SERVD: start service [IPT.LAN-1] /var/servd/IPT.LAN-1_start.sh: line 4: can't create /proc/fastnat/forskipsupport: nonexistent directory SERVD: stop service [IPT.LAN-2] SERVD: service [IPT.LAN-2] is already stopped. SERVD: start service [IPT.LAN-2] /var/servd/IPT.LAN-2_start.sh: line 4: can't create /proc/fastnat/forskipsupport: nonexistent directory SERVD: stop service [IPT.LAN-3] SERVD: service [IPT.LAN-3] is already stopped. SERVD: start service [IPT.LAN-3] SERVD: service [IPT.LAN-3] return error 108. SERVD: stop service [IPT.LAN-4] SERVD: service [IPT.LAN-4] is already stopped. SERVD: start service [IPT.LAN-4] SERVD: service [IPT.LAN-4] return error 108. SERVD: stop service [IPT.LAN-5] SERVD: service [IPT.LAN-5] is already stopped. SERVD: start service [IPT.LAN-5] SERVD: service [IPT.LAN-5] return error 108. SERVD: stop service [IPT.LAN-6] SERVD: service [IPT.LAN-6] is already stopped. SERVD: start service [IPT.LAN-6] SERVD: service [IPT.LAN-6] return error 108. SERVD: stop service [IPT.LAN-7] SERVD: service [IPT.LAN-7] is already stopped. SERVD: start service [IPT.LAN-7] SERVD: service [IPT.LAN-7] return error 108. SERVD: stop service [IPT.LAN-8] SERVD: service [IPT.LAN-8] is already stopped. SERVD: start service [IPT.LAN-8] SERVD: service [IPT.LAN-8] return error 108. SERVD: stop service [SCH_REBOOT_ACTIVE] SERVD: service [SCH_REBOOT_ACTIVE] is already stopped. SERVD: stop service [INFSVCS.LAN-1] SERVD: service [INFSVCS.LAN-1] is already stopped. SERVD: start service [INFSVCS.LAN-1] SERVD: event [LAN-1.CONNECTED] not found! SERVD: event [INFSVCS.LAN-1.UP/default] SERVD: event [STATUS.READY] not found! SERVD: stop service [INFSVCS.LAN-2] SERVD: service [INFSVCS.LAN-2] is already stopped. SERVD: start service [INFSVCS.LAN-2] SERVD: event [LAN-2.CONNECTED] not found! SERVD: event [INFSVCS.LAN-2.UP] not found! SERVD: stop service [DHCPS4.BRIDGE-1] SERVD: service [DHCPS4.BRIDGE-1] is already stopped. SERVD: start service [DHCPS4.BRIDGE-1] dhcps4setup: (BRIDGE-1) no interface. SERVD: service [DHCPS4.BRIDGE-1] return error 9. SERVD: stop service [DHCPS4.LAN-1] SERVD: service [DHCPS4.LAN-1] is already stopped. SERVD: start service [DHCPS4.LAN-1] SERVD: stop service [DHCPS4.LAN-2] SERVD: service [DHCPS4.LAN-2] is already stopped. SERVD: start service [DHCPS4.LAN-2] SERVD: start service [WIFI_MODS] 377+0 records in 377+0 records out 377+0 records in 377+0 records out [ 23.500000] mem_manager: module license 'unspecified' taints kernel. [ 23.500000] Disabling lock debugging due to kernel taint [ 23.510000] __mm_init_module [ 23.660000] ath_dfs: Version 2.0.0 [ 23.660000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved [ 23.710000] ath_spectral: Version 2.0.0 [ 23.710000] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved [ 24.900000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D) [ 24.930000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved [ 24.970000] ath_tx99: Version 2.0 [ 24.970000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved [ 25.170000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved [ 25.300000] __ath_attach: Set global_scn[0] [ 25.310000] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead *** [ 25.320000] ACBKMinfree = 48 [ 25.320000] ACBEMinfree = 32 [ 25.320000] ACVIMinfree = 16 [ 25.330000] ACVOMinfree = 0 [ 25.330000] CABMinfree = 48 [ 25.330000] UAPSDMinfree = 0 [ 25.330000] ATH_TXBUF=2700 [ 25.350000] Enterprise mode: 0x03bda000 [ 25.350000] Restoring Cal data from FS [ 25.350000] [ 25.350000] ART Version : -48.0.0 [ 25.360000] SW Image Version : -48.0.0.0.0 [ 25.360000] Board Revision : [ 25.370000] CtlData CTICK 2G override for EU countrycode [ 25.370000] ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125 [ 25.380000] SPECTRAL : get_capability not registered [ 25.390000] HAL_CAP_PHYDIAG : Capable [ 25.390000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237) [ 25.400000] SPECTRAL : get_capability not registered [ 25.400000] HAL_CAP_RADAR : Capable [ 25.410000] SPECTRAL : Need to fix the capablity check for SPECTRAL [ 25.410000] (spectral_attach : 242) [ 25.420000] SPECTRAL : get_capability not registered [ 25.420000] HAL_CAP_SPECTRAL_SCAN : Capable [ 25.430000] SPECTRAL : get_tsf64 not registered [ 25.430000] spectral_init_netlink 78 NULL SKB [ 25.440000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT [ 25.440000] SPECTRAL :----- module attached [ 25.440000] Green-AP : Green-AP : Attached [ 25.440000] [ 25.450000] ath_get_caps[6155] rx chainmask mismatch actual 3 sc_chainmak 0 [ 25.460000] ath_get_caps[6130] tx chainmask mismatch actual 3 sc_chainmak 0 [ 25.470000] band steering initialized for direct attach hardware [ 25.480000] ieee80211_bsteering_attach: Band steering initialized [ 25.490000] acfg_attach: 2884: Netlink socket created:86fb4000 [ 25.490000] ath_attach_dfs[12576] dfsdomain 1 [ 25.500000] dfs_attach: event log enabled by default [ 25.510000] SPECTRAL : module already attached [ 25.520000] ath_attach: Set global_ic[1]..gloabl_ic ptr:86329150 [ 25.520000] osif_wrap_attach:441 osif wrap attached [ 25.530000] osif_wrap_devt_init:402 osif wrap dev table init done [ 25.540000] Wrap Attached: Wrap_com =86fb4800 ic->ic_wrap_com=86fb4800 &wrap_com->wc_devt=86fb4800 [ 25.550000] ath_tx_paprd_init sc 86368000 PAPRD Enabled [ 25.560000] wifi0: Atheros 956X: mem=0xb8100000, irq=47 [ 25.570000] ath_da_pci: (Atheros/multi-bss) [ 26.130000] ath_ol_pci: (Atheros/multi-bss) [ 26.130000] hif_pci_enable_bus: con_mode = 0x0, device_id = 0x56 [ 26.140000] ath_ol_pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] [ 26.150000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) [ 26.150000] hif_pci_enable_bus: hif_enable_pci done *********** QCA9888 *************hif_pci_enable_bus: hif_type = 0xe, target_type = 0xchif_pci_enable_bus: hif_pci_probe_tgt_wakeup donehif_target_sync: Loop checking FW signalhif_target_sync: Got FW signal, retries = 0hif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_set_hia_extnd: E [ 26.190000] chip_id 0xc chip_revision 0x0 [ 26.200000] [ 26.200000] CLOCK PLL skipped [ 26.200000] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff [ 26.210000] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL [ 26.220000] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_pci_configure_legacy_irq: Ehif_pci_configure_legacy_irq: X, ret = 0hif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4 [ 26.250000] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON [ 26.260000] __ol_ath_attach() Allocated scn 85f40380 [ 26.270000] __ol_ath_attach: dev name wifi1 [ 26.270000] ol_ath_attach interface_id 1 [ 26.280000] ol_target_init() BMI inited. [ 26.280000] ol_target_init() BMI Get Target Info. [ 26.290000] Chip id: 0xc, chip version: 0x1000000 [ 26.290000] [ 26.290000] CE WAR Disabled [ 26.300000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 [ 26.300000] ol_target_init() configure Target . [ 26.310000] [ 26.310000] Target Version is 1000000 [ 26.310000] [ 26.310000] Flash Download Address c0000 [ 26.320000] ol_transfer_bin_file: flash data file defined [ 26.320000] ol_transfer_bin_file[4706] Get Caldata for wifi1. [ 26.330000] qdf_fs_read[59], Open File /tmp/wifi1.caldata SUCCESS!!file system magic:-2054924042super blocksize:4096inode 4848file size:12064qc98xx_verify_checksum: flash checksum passed: 0xa54e [ 26.350000] ol_transfer_bin_file 4767: Download Flash data len 12064 [ 26.360000] Board extended Data download address: 0x0 [ 26.390000] [ 26.390000] Board data initialized [ 26.390000] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 [ 26.400000] [ 26.400000] Selecting OTP binary for CHIP Version 0 [ 26.460000] ol_transfer_bin_file 4587: downloading file 0, Download data len 9084 [ 26.500000] [ 26.500000] First OTP send param 8000 [ 26.740000] ol_ath_download_firmware :First OTP download and Execute is good address:0x4800 return param 4660 [ 26.750000] ol_ath_download_firmware:##Board Id 18 , CHIP Id 0 [ 26.760000] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 [ 26.770000] [ 26.770000] wifi1: Selecting board data file name boardData_2_0_QCA9888_5G_Y9582.bin [ 26.780000] [ 26.780000] ===find alpha boarddata=== [ 26.780000] qdf_fs_read[59], Open File /lib/firmware/QCA9888/alpha_hw.2/boardData_2_0_QCA9888_5G_Y9582.bin SUCCESS!!file system magic:-2054924042super blocksize:4096inode 2294file size:12064qc98xx_verify_checksum error: flash checksum 0xffff, computed 0xffff [ 26.810000] ===road alpha boarddata fail, used orignal QCA boarddata=== [ 26.810000] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9888/hw.2/boardData_2_0_QCA9888_5G_Y9582.bin [ 26.840000] ol_transfer_bin_file 4587: downloading file 3, Download data len 12064 [ 26.840000] QC98XX overwrite boarddate ! [ 26.850000] Overwrite 5G ctl power for countrycdoe 250 [ 26.850000] Board extended Data download address: 0x0 [ 26.880000] ol_ath_download_firmware: Using 0x1234 for the remainder of init [ 26.890000] [ 26.890000] Selecting OTP binary for CHIP Version 0 [ 26.910000] ol_transfer_bin_file 4587: downloading file 0, Download data len 9084 [ 26.950000] [ 26.950000] [Flash] : Ignore Module param [ 26.950000] [ 26.950000] Second otp download Param 10000 [ 27.210000] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 [ 27.220000] [ 27.220000] Mission mode: Firmware CHIP Version 0 [ 27.380000] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144 [ 27.410000] Swap: bytes_left to copy: fw:16; dma_page:28605 [ 27.410000] Swap: wrong length read:0 [ 27.420000] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 233539 Target address 41a4a8 [ 27.430000] scn=85f40380 target_write_addr=41a4a8 seg_info=85f2fc10 [ 27.430000] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 [ 27.440000] bin_filename=QCA9888/hw.2/athwlan.bin swap_filename=/lib/firmware/QCA9888/hw.2/athwlan.codeswap.bin [ 27.450000] ol_transfer_bin_file: Downloading firmware file: QCA9888/hw.2/athwlan.bin [ 27.840000] ol_transfer_bin_file 4587: downloading file 1, Download data len 372428 [ 29.270000] ol_target_init() Download FW done. [ 29.280000] ol_ath_attach() WMI attached. wmi_handle 873bc000 [ 29.290000] wmi_unified_register_event_handler: Event id 62 is unavailable [ 29.290000] +htc_create .. HIF :861c4000-htc_create: (0x85fa4800) [ 29.300000] htc_wmi_init() HT Create . 85fa4800 [ 29.300000] htc_wmi_init 7528 host_enable 0 nss_nwifi_offload 0 [ 29.310000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) [ 29.320000] OL_ACBKMinfree : 0 [ 29.320000] OL_ACBEMinfree : 0 [ 29.330000] OL_ACVIMinfree : 0 [ 29.330000] OL_ACVOMinfree : 0 [ 29.330000] hif_enable_fastpath, Enabling fastpath mode [ 29.340000] +HWT [ 29.340000] hif_completion_thread_startup: pipe_num:0 pipe_info:0x861c705chif_completion_thread_startup: pipe_num:3 pipe_info:0x861c711chif_completion_thread_startup: pipe_num:4 pipe_info:0x861c715c [ 29.360000] -HWT [ 29.360000] Startup Mode-0 set [ 29.370000] [ 29.370000] <=== cfg max peer id 1056 ====> [ 29.380000] htt_peer_map_timer_init Enter pdev 85140000 hrtimer 851448a8 [ 29.380000] [ 29.380000] htt_alloc_peer_map_mem : Alloc Success : host q vaddr 85e86000 paddr 5e86000 [ 29.390000] [ 29.390000] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts [ 29.400000] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from 84dc0000 [ 29.420000] Firmware_Build_Number:61 [ 29.420000] FW wireless modes: 0x7f9001 [ 29.420000] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339979fa vht_supp_mcs:0x0000fffa [ 29.440000] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0 [ 29.440000] [ 29.440000] Sending Ext resource cfg: HOST PLATFORM as 1 [ 29.440000] fw_feature_bitmap as 50 to TGT [ 29.450000] ol_ath_service_ready_event: tt_support: 1 [ 29.460000] ol_ath_service_ready_event: periodic_chan_stats: 1 [ 29.470000] ol_ath_service_ready_event: sw_cal_support_check_flag: 1 [ 29.470000] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17 [ 29.480000] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 [ 29.490000] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, [ 29.500000] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 [ 29.510000] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, [ 29.510000] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 [ 29.520000] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, [ 29.530000] idx 0 req 1 num_units 0 num_unit_info 2 unit size 896 actual units 531 [ 29.540000] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 896, [ 29.550000] idx 4 req 5 num_units 0 num_unit_info 2 unit size 1948 actual units 531 [ 29.560000] ol_ath_alloc_host_mem_chunk req_id 5 idx 4 num_units 531 unit_len 1948, [ 29.570000] Support not added yet for Service 91 [ 29.580000] Support not added yet for Service 92 [ 29.580000] No EXT_MSG send INIT now [ 29.580000] chunk 0 len 13568 requested , ptr 0x4db8000 [ 29.590000] chunk 1 len 54272 requested , ptr 0x4e20000 [ 29.600000] chunk 2 len 217088 requested , ptr 0x4e40000 [ 29.600000] chunk 3 len 475776 requested , ptr 0x4e80000 [ 29.610000] chunk 4 len 1034388 requested , ptr 0x4f00000 [ 29.610000] ol_ath_service_ready_event[4259] WAPI MBSSID 2 [ 29.660000] Version = 16777216 3 status = 0 [ 29.660000] ol_ath_connect_htc() WMI is ready [ 29.670000] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1 [ 29.680000] target uses HTT version 2.2; host uses 2.2 [ 29.690000] ol_ath_attach() connect HTC. [ 29.690000] bypasswmi : 0 [ 29.690000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. [ 29.710000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2) flags 0x2150 [ 29.710000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4) flags 0xa0 [ 29.720000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x8) flags 0xc0 [ 29.730000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x20) flags 0xd0 [ 29.730000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x40) flags 0x150 [ 29.740000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x800) flags 0x10080 [ 29.750000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2000) flags 0x20080 [ 29.760000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4000) flags 0x40080 [ 29.760000] Add VHT80 channel: 5210 [ 29.770000] Add VHT80 channel: 5290 [ 29.770000] Add VHT80 channel: 5775 [ 29.780000] Skipping VHT80 channel 5825 [ 29.780000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5775, cfreq2:5210 in case of VHT80+80 [ 29.790000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5775, cfreq2:5290 in case of VHT80+80 [ 29.800000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5775, cfreq2:5210 in case of VHT80+80 [ 29.810000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5775, cfreq2:5290 in case of VHT80+80 [ 29.820000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5775, cfreq2:5210 in case of VHT80+80 [ 29.820000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5775, cfreq2:5290 in case of VHT80+80 [ 29.830000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5775, cfreq2:5210 in case of VHT80+80 [ 29.840000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5775, cfreq2:5290 in case of VHT80+80 [ 29.850000] freq=58 [ 29.850000] OL Resmgr Init-ed [ 29.860000] ieee80211_bsteering_attach: Band steering initialized [ 29.860000] acfg_attach: using existing sock 86fb4000 [ 29.870000] SPECTRAL : get_capability not registered [ 29.880000] HAL_CAP_PHYDIAG : Capable [ 29.880000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237) [ 29.890000] SPECTRAL : get_capability not registered [ 29.890000] HAL_CAP_RADAR : Capable [ 29.900000] SPECTRAL : Need to fix the capablity check for SPECTRAL [ 29.900000] (spectral_attach : 242) [ 29.910000] SPECTRAL : get_capability not registered [ 29.910000] HAL_CAP_SPECTRAL_SCAN : Capable [ 29.920000] SPECTRAL : get_tsf64 not registered [ 29.920000] spectral_init_netlink 78 NULL SKB [ 29.930000] Green-AP : Green-AP : Attached [ 29.930000] [ 29.930000] Green-AP : Attached [ 29.930000] rate power table override is only supported for AR98XX [ 29.940000] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. [ 29.950000] ol_if_dfs_attach: called; ptr=8481197c, radar_info=863c7b58 [ 29.960000] dfs_attach: event log enabled by default [ 29.960000] >>>> CB Set (null) [ 29.970000] ol_ath_attach() UMAC attach . [ 29.970000] [ 29.970000] BURSTING enabled by default [ 29.980000] ol_ath_attach: Set global_ic[2] ..ptr:86329150 [ 29.980000] ath_lowi_if_netlink_init LOWI Netlink successfully created [ 29.990000] osif_wrap_attach:441 osif wrap attached [ 29.990000] osif_wrap_devt_init:402 osif wrap dev table init done [ 30.000000] Wrap Attached: Wrap_com =86ece800 ic->ic_wrap_com=86ece800 &wrap_com->wc_devt=86ece800 [ 30.010000] __ol_ath_attach: needed_headroom reservation 60 [ 30.020000] ol_ath_thermal_mitigation_attach: -- [ 30.030000] ol_ath_pci_probe num_radios=0, wifi_radios[0].sc = 85f40380 wifi_radio_type = 2 [ 30.030000] ath_sysfs_diag_init: diag_fsattr [ 30.080000] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16 [ 30.090000] +hif_update_pipe_callback pipeid 8 [ 30.090000] -hif_update_pipe_callback [ 30.100000] __sa_init_module [ 30.310000] [wifi1] FWLOG: [36710] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 ) [ 30.320000] [wifi1] FWLOG: [36710] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 ) [ 30.330000] [wifi1] FWLOG: [36710] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 ) [ 30.340000] [wifi1] FWLOG: [36710] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 ) [ 30.350000] [wifi1] FWLOG: [36710] WAL_DBGID_TX_AC_BUFFER_SET ( 0x100, 0x11e1a300 ) [ 30.350000] [wifi1] FWLOG: [36913] UNKNOWN 22:55 ( 0x10, 0xa10, 0x110, 0x10, 0x0 ) [ 31.130000] ath_net80211_dfs_clist_update: called, cmd=1, nollist= (null), nentries=0 [ 31.130000] ath_attach_dfs[12576] dfsdomain 1 [ 31.140000] dfs_attach: event log enabled by default [ 31.170000] isCountryCodeValid: EEPROM regdomain 0x0 [ 31.170000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2) flags 0x2150 [ 31.180000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4) flags 0xa0 [ 31.190000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x8) flags 0xc0 [ 31.190000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x20) flags 0xd0 [ 31.200000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x40) flags 0x150 [ 31.210000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x800) flags 0x10080 [ 31.210000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2000) flags 0x20080 [ 31.220000] ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4000) flags 0x40080 [ 31.230000] Add VHT80 channel: 5210 [ 31.230000] Add VHT80 channel: 5290 [ 31.240000] Add VHT80 channel: 5530 [ 31.240000] Skipping VHT80 channel 5580 [ 31.240000] Skipping VHT80 channel 5660 [ 31.250000] Skipping VHT80 channel 5680 [ 31.250000] Skipping VHT80 channel 5700 [ 31.260000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5530, cfreq2:5210 in case of VHT80+80 [ 31.270000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5530, cfreq2:5290 in case of VHT80+80 [ 31.270000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5530, cfreq2:5210 in case of VHT80+80 [ 31.280000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5530, cfreq2:5290 in case of VHT80+80 [ 31.290000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5530, cfreq2:5210 in case of VHT80+80 [ 31.300000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5530, cfreq2:5290 in case of VHT80+80 [ 31.310000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5530, cfreq2:5210 in case of VHT80+80 [ 31.320000] EMI WAR rejecting fc1 > fc2 Combination cfreq1:5530, cfreq2:5290 in case of VHT80+80 [ 31.330000] freq=58 [ 31.330000] freq=106 SERVD: start service [PHYINF.BAND24G-1.1] ifconfig: SIOCGIFFLAGS: No such device [ 31.530000] wlan_vap_create : enter. devhandle=0x86370380, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 31.540000] ieee80211_mbo_vattach:MBO Initialized [ 31.540000] ieee80211_oce_vattach: OCE Initialized [ 31.550000] wlan_vap_create : exit. devhandle=0x86370380, vap=0x860f0000, opmode=IEEE80211_M_HOSTAP, flags=0x1. [ 31.560000] __ieee80211_smart_ant_init: Smart Antenna is not supported [ 31.560000] VAP device ath0 created osifp: (85fa7380) os_if: (860f0000) ath0 Interface doesn't accept private ioctl... HALDbg (8BE0): Operation not permitted [ 31.590000] sc nodebug 0 [ 31.660000] [ 31.660000] DES SSID SET=dlink-2FE8 [ 31.670000] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 [ 31.680000] siwfreq [ 31.680000] Set freq vap 0 stop send + 860f0000 [ 31.680000] Set freq vap 0 stop send -860f0000 [ 31.720000] Set wait done --860f0000 [ephp.c read_cond_list 1363] PHP operator precedence issue at: /etc/scripts/wifirnodes.php, cond_qty: 3, and_qty: 1, or_qty: 1 SERVD: start service [PHYINF.BAND24G-1.2] SERVD: service [PHYINF.BAND24G-1.2] return error 8. SERVD: start service [PHYINF.BAND5G-1.1] ifconfig: SIOCGIFFLAGS: No such device [ 32.200000] wlan_vap_create : enter. devhandle=0x85f40380, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 32.210000] send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 18:0f:76:3b:2f:eb: [ 32.220000] ieee80211_mbo_vattach:MBO Initialized [ 32.220000] ieee80211_oce_vattach: OCE Initialized [ 32.230000] wlan_vap_create : exit. devhandle=0x85f40380, vap=0x848f0000, opmode=IEEE80211_M_HOSTAP, flags=0x1. [ 32.240000] __ieee80211_smart_ant_init: Smart Antenna is not supported [ 32.250000] Enabling TX checksum bit for the vap ath2 features 4000 [ 32.250000] Enabling SG bit for the vap ath2 features 4000 [ 32.260000] Enabling SG bit for the vap ath2 features 4000 [ 32.260000] Enabling TSO bit for the vap ath2 features 4000 [ 32.270000] Enabling LRO bit for the vap ath2 features 4000 [ 32.280000] VAP device ath2 created osifp: (860f9380) os_if: (848f0000) ath2 [ 32.310000] [wifi1] FWLOG: [38425] UNKNOWN 22:55 ( 0x37, 0x199, 0x130, 0x30, 0x0 ) [ 32.340000] [ 32.340000] DES SSID SET=dlink-5GHz-2FE8 [ 32.340000] ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 [ 32.350000] siwfreq [ 32.350000] Set freq vap 0 stop send + 848f0000 [ 32.360000] Set freq vap 0 stop send -848f0000 [ 32.390000] Set wait done --848f0000 [ 32.430000] Resetting spectral chainmask to Rx chainmask [ephp.c read_cond_list 1363] PHP operator precedence issue at: /etc/scripts/wifirnodes.php, cond_qty: 3, and_qty: 1, or_qty: 1 SERVD: start service [PHYINF.BAND5G-1.2] [ 32.660000] Switching to Tx Mode-0 SERVD: service [PHYINF.BAND5G-1.2] return error 8. SERVD: start service [WIFI_ACTIVATE] [ 33.290000] 8021q: adding VLAN 0 to HW filter on device ath0 [ 33.290000] device ath0 entered promiscuous mode [ 33.320000] br0: port 2(ath0) entered forwarding state [ 33.320000] br0: port 2(ath0) entered forwarding state [ 33.410000] Sending SCAN START cmd [ 33.410000] 8021q: adding VLAN 0 to HW filter on device ath2 [ 33.420000] device ath2 entered promiscuous mode [ 33.420000] br0: port 3(ath2) entered forwarding state [ 33.430000] br0: port 3(ath2) entered forwarding state SERVD: stop service [WEBACCESS] SERVD: service [WEBACCESS] is already stopped. SERVD: start service [WEBACCESS] killall: fileaccessd: no process killed SERVD: stop service [SAMBA] SERVD: service [SAMBA] is already stopped. SERVD: start service [SAMBA] /var/servd/WEBACCESS_start.sh: line 3: fileaccessd: not found SERVD: service [SAMBA] return error 108. SERVD: stop service [INFSVCS.WAN-3] SERVD: service [INFSVCS.WAN-3] is already stopped. SERVD: start service [INFSVCS.WAN-3] SERVD: event [WAN-3.CONNECTED] not found! SERVD: event [UPDATERESOLV/default] SERVD: event [INFSVCS.WAN-3.UP] not found! SERVD: event [UPNP.IGD.NOTIFY.WANIPCONN1] not found! SERVD: start service [ENLAN] [ 34.310000] [wifi1] FWLOG: [40556] WAL channel change freq=5180, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 34.320000] [wifi1] FWLOG: [40870] WAL channel change freq=5200, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 34.330000] [wifi1] FWLOG: [41185] WAL channel change freq=5220, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 35.310000] [wifi1] FWLOG: [41499] WAL channel change freq=5240, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 35.320000] [wifi1] FWLOG: [41813] WAL channel change freq=5260, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 35.330000] [wifi1] FWLOG: [42126] WAL channel change freq=5280, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 35.340000] [wifi1] FWLOG: [42441] WAL channel change freq=5300, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 36.060000] mlme_create_infra_bss : Overriding HT40 channel with HT20 channel [ 36.120000] __ieee80211_smart_ant_init: Smart Antenna is not supported [/etc/scripts/upwifistatshlper_G_band.sh] CONNSTATUS ath0 1 .... not support [CONNSTATUS] ... [ 36.310000] [wifi1] FWLOG: [42755] WAL channel change freq=5320, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 36.320000] [wifi1] FWLOG: [43068] WAL channel change freq=5500, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 36.330000] [wifi1] FWLOG: [43382] WAL channel change freq=5520, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 37.310000] [wifi1] FWLOG: [43697] WAL channel change freq=5540, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 37.320000] [wifi1] FWLOG: [44011] WAL channel change freq=5560, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 37.330000] [wifi1] FWLOG: [44325] WAL channel change freq=5580, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 38.310000] [wifi1] FWLOG: [44639] WAL channel change freq=5660, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 38.320000] [wifi1] send_vdev_down_cmd_non_tlv for vap 0 (873bc000) [ 38.330000] OL vap_start + [ 38.330000] VDEV START [ 38.330000] OL vap_start - [ 38.340000] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3 [ 38.340000] FWLOG: [44953] WAL channel change freq=5680, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 38.350000] [wifi1] FWLOG: [45267] WAL channel change freq=5700, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 38.540000] ol_vdev_start_resp_ev for vap 0 (873bc000) [ 38.550000] send_wmm_update_cmd_non_tlv: [ 38.550000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 [ 38.560000] send_vdev_up_cmd_non_tlv for vap 0 (873bc000) [ 38.560000] __ieee80211_smart_ant_init: Smart Antenna is not supported [/etc/scripts/upwifistatshlper_A_band.sh] CONNSTATUS ath2 1 .... not support [CONNSTATUS] ... SERVD: event [IPV6ENABLE/ETH-1] SERVD: event [IPV6ENABLE/ETH-2] SERVD: event [IPV6ENABLE/ETH-3] SERVD: start service [HTTP.LAN-1] [ 39.310000] [wifi1] FWLOG: [45590] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) [ 39.320000] [wifi1] FWLOG: [45590] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) [ 39.330000] [wifi1] FWLOG: [45595] vap-0 VDEV_MGR_VDEV_START ( 0x1464, 0x2, 0x0, 0x0 ) [ 39.330000] [wifi1] FWLOG: [45596] WAL channel change freq=5220, mode=10 flags=0 rx_ok=1 tx_ok=1 [ 39.340000] [wifi1] FWLOG: [45810] UNKNOWN 14:20 ( 0x0 ) [ 39.350000] [wifi1] FWLOG: [45834] VDEV_MGR_HP_START_TIME ( 0x0, 0x1464, 0x898001 ) [ 39.360000] [wifi1] FWLOG: [45834] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 ) [ 39.360000] [wifi1] FWLOG: [45834] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) [ 39.370000] [wifi1] FWLOG: [45834] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x1464, 0x0, 0x0 ) SERVD: start service [UPNP.LAN-1] SERVD: event [UPNP.ALIVE.LAN-1/default] SERVD: start service [NEAP.LAN-1] SERVD: service [NEAP.LAN-1] return error 108. SERVD: start service [NAMERESOLV.LAN-1] SERVD: start service [DHCPS4.LAN-1] SERVD: service [DHCPS4.LAN-1] is already started. SERVD: start service [DNS4.LAN-1] SERVD: stop service [BWC.LAN-1] SERVD: service [BWC.LAN-1] is already stopped. SERVD: start service [BWC.LAN-1] bwc_setup: (LAN-1) bwc node/profile not exist, service stop. SERVD: service [BWC.LAN-1] return error 8. SERVD: start service [INET.LAN-3] [/var/servd/INET.LAN-3_start.sh]: starting LAN-3... LAN-3 a is link local interface. SERVD: event [LAN-3.UP/default] [/var/servd/INET.LAN-3_start.sh]: starting LAN-3 done !!! SERVD: start service [ENLAN] SERVD: service [ENLAN] is already started. SERVD: start service [HTTP.LAN-2] httpsetup: (LAN-2) not active. SERVD: service [HTTP.LAN-2] return error 8. SERVD: start service [DHCPS4.LAN-2] SERVD: service [DHCPS4.LAN-2] is already started. SERVD: start service [DNS4.LAN-2] SERVD: stop service [ROUTE.STATIC] SERVD: service [ROUTE.STATIC] is already stopped. SERVD: start service [ROUTE.STATIC] SERVD: stop service [ROUTE.IPUNNUMBERED] SERVD: service [ROUTE.IPUNNUMBERED] is already stopped. SERVD: start service [ROUTE.IPUNNUMBERED] SERVD: stop service [IPTOBF] SERVD: service [IPTOBF] is already stopped. SERVD: start service [IPTOBF] SERVD: stop service [IPTDEFCHAIN] SERVD: start service [IPTDEFCHAIN] [ephp.c read_cond_list 1363] PHP operator precedence issue at: /etc/services/IPTDEFCHAIN.php, cond_qty: 3, and_qty: 1, or_qty: 1 [ephp.c read_cond_list 1363] PHP operator precedence issue at: /etc/services/IPTDEFCHAIN.php, cond_qty: 3, and_qty: 1, or_qty: 1 insmod: can't insert '/lib/modules/nf_conntrack_ipsec_pass.ko': No such file or directory insmod: can't insert '/lib/modules/nf_conntrack_sip.ko': File exists insmod: can't insert '/lib/modules/nf_nat_sip.ko': File exists insmod: can't insert '/lib/modules/nf_conntrack_rtsp.ko': No such file or directory insmod: can't insert '/lib/modules/nf_nat_rtsp.ko': No such file or directory insmod: can't insert '/lib/modules/nf_nat_proto_gre.ko': File exists insmod: can't insert '/lib/modules/nf_conntrack_proto_gre.ko': File exists insmod: can't insert '/lib/modules/nf_conntrack_pptp.ko': File exists insmod: can't insert '/lib/modules/nf_nat_pptp.ko': File exists SERVD: stop service [LLD2] SERVD: service [LLD2] is already stopped. SERVD: start service [LLD2] SERVD: start service [HOSTAPD-PMF] SERVD: stop service [STUNNEL] SERVD: service [STUNNEL] is already stopped. SERVD: start service [STUNNEL] Configuration file: /var/run/hos[ 42.020000] ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1 tapd-ath0.conf Configuration file: /var/run/hostapd-ath2.conf [ 42.050000] br0: port 2(ath0) entered disabled state [ 42.060000] DEVICE IS DOWN ifname=ath0 ath0: [ 42.060000] DEVICE IS DOWN ifname=ath0 Could not connect to kernel driver Using interface ath0 with hwaddr 18:0f:76:3b:2f:e8 and ssid "dlink-2FE8" __ERROR [STUNNEL.php] cannot find inf LAN-4 Start Stunnel service .. SERVD: stop service [IPT.WAN-1] [/etc/scripts/upwifistatshlper_G_band.sh] CONNSTATUS ath0 0 .... not support [CONNSTATUS] ... SERVD: start service [IPT.WAN-1] random: Only 19/20 bytes of s[ 42.750000] Warning: node not in table 0x848e0000 trong random data available from /dev/random random: Not enough entropy pool available for secure operations WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects [ 42.850000] br0: port 2(ath0) entered forwarding state [ 42.860000] br0: port 2(ath0) entered forwarding state [ 42.860000] 8021q: adding VLAN 0 to HW filter on device ath0 ath0[ 42.870000] ieee80211_ioctl_siwmode: imr.ifm_active=18875008, new mode=3, valid=1 : interface state UNINITIALIZED->ENABLED ath0: AP-ENABLED [ 42.910000] STOPPED EVENT for vap 0 (873bc000) [ 42.920000] send_vdev_down_cmd_non_tlv for vap 0 (873bc000) [ 42.940000] br0: port 3(ath2) entered disabled state [ 42.940000] DEVICE IS DOWN ifname=ath2 ath2: [ 42.960000] DEVICE IS DOWN ifname=ath2 Could not connect to kernel driver SERVD: start service [HTTP.WAN-3] Using interface ath2 with hwaddr 18:0f:76:3b:2f:eb and ssid "dlink-5GHz-2FE8" [ 43.310000] [wifi1] FWLOG: [50295] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) [ 43.320000] [wifi1] FWLOG: [50295] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) httpsetup: (WAN-3) not active. SERVD: service [HTTP.WAN-3] return error 8. SER[ 43.490000] OL vap_start + VD: stop service[ 43.490000] VDEV START [ 43.490000] OL vap_start - SERVD: service [ 43.500000] ol_vdev_start_resp_ev for vap 0 (873bc000) [IP6TDEFCHAIN] i[ 43.500000] send_wmm_update_cmd_non_tlv: s already stoppe[ 43.510000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 d. SERVD: start[ 43.520000] send_vdev_up_cmd_non_tlv for vap 0 (873bc000) service [IP6TDE[ 43.520000] __ieee80211_smart_ant_init: Smart Antenna is not supported FCHAIN] [ 43.540000] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3 [ 43.540000] br0: port 3(ath2) entered forwarding state [ 43.550000] br0: port 3(ath2) entered forwarding state [ 43.550000] 8021q: adding VLAN 0 to HW filter on device ath2 ath2: interface state UNINITIALIZED->ENABLED ath2: AP-ENABLED [ 43.580000] vap-0(ath2):ieee80211_beacon_update: reinit beacon SERVD: stop service [FIREWALL6] SERVD: service [FIREWALL6] is already stopped. SERVD: start service [FIREWALL6] SERVD: stop service [IP6TSMPSECURITY] SERVD: service [IP6TSMPSECURITY] is already stopped. SERVD: start service [IP6TSMPSECURITY] SERVD: stop service [IP6TINGRESSFILTER] SERVD: service [IP6TINGRESSFILTER] is already stopped. SERVD: start service [IP6TINGRESSFILTER] SERVD: service [IP6TINGRESSFILTER] return error 9. SERVD: stop service [ROUTE6.DYNAMIC] SERVD: service [ROUTE6.DYNAMIC] is already stopped. SERVD: start service [ROUTE6.DYNAMIC] SERVD: stop service [ROUTE6.STATIC] SERVD: service [ROUTE6.STATIC] is already stopped. SERVD: start service [ROUTE6.STATIC] SERVD: stop service [MULTICAST] SERVD: service [MULTICAST] is already stopped. SERVD: start service [MULTICAST] SERVD: stop service [DEVICE.TIME] SERVD: service [DEVICE.TIME] is already stopped. SERVD: start service [DEVICE.TIME] SERVD: stop service [RIPD] SERVD: service [RIPD] is already stopped. SERVD: start service [RIPD] Run NTP client ... [V4] [] ntpclient -h ntp1.dlink.com -i 5 -s -4 SERVD: stop service [EMAIL] SERVD: service [EMAIL] is already stopped. SERVD: start service [EMAIL] SERVD: stop service [UPNPC] SERVD: service [UPNPC] is already stopped. SERVD: start service [UPNPC] SERVD: service [UPNPC] return error 108. SERVD: stop service [MDNSRESPONDER] SERVD: service [MDNSRESPONDER] is already stopped. SERVD: start service [MDNSRESPONDER] ntp1.dlink.com: [ 44.320000] [wifi1] Unknown host geFWLOG: [50848] WAL_DBGID_SECURITY_ENCR_EN ( taddrinfo 2: Con ) [ 44.330000] [wifi1] getaddrinfo faiFWLOG: [50848] WAL_DBGID_SECURITY_MCAST_KEY_SET ( led: Name or ser0x1vice not known ) [ 44.340000] [wifi1] FWLOG: [50879] vap-0 VDEV_MGR_VDEV_START ( 0x1464, 0x2, 0x0, 0x0 ) [ 44.350000] [wifi1] FWLOG: [50879] UNKNOWN 14:20 ( 0x0 ) [ 44.350000] [wifi1] FWLOG: [50912] VDEV_MGR_HP_START_TIME ( 0x0, 0x1464, 0xd48000 ) [ 44.360000] [wifi1] FWLOG: [50912] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 ) [ 44.370000] [wifi1] FWLOG: [50912] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) [ 44.380000] [wifi1] FWLOG: [50912] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x1464, 0x0, 0x0 ) NTP4 will run in 10 seconds! mdnsresponder server start ! SERVD: stop service [NAMERESOLV] SERVD: service [NAMERESOLV] is already stopped. SERVD: start service [NAMERESOLV] SERVD: stop service [INFSVCS.LAN-3] SERVD: service [INFSVCS.LAN-3] is already stopped. SERVD: start service [INFSVCS.LAN-3] [ 45.600000] mlme_create_infra_bss : Overriding HT40 channel with HT20 channel [ 45.640000] __ieee80211_smart_ant_init: Smart Antenna is not supported [ 45.740000] vap-0(ath0):ieee80211_beacon_update: reinit beacon SERVD: event [LAN-3.CONNECTED] not found! SERVD: event [INFSVCS.LAN-3.UP] not found! SERVD: stop service [DNS] SERVD: service [DNS] is already stopped. SERVD: start service [DNS] SERVD: start service [PHYINF.BAND5G-1.1_ACTIVE] SERVD: event [WLAN.CONNECTED/default] WLAN 24G LED:TURN_ON! SERVD: start service [PHYINF.BAND24G-1.1_ACTIVE] SERVD: event [WLAN.CONNECTED/default] SERVD: stop service [HTTP] SERVD: service [HTTP] is already stopped. SERVD: start service [HTTP] WLAN 24G LED:TURN_ON! SERVD: event [HTTP.UP] not found! SERVD: stop service [IPT.WAN-3] SERVD: start service [IPT.WAN-3] [/etc/scripts/upwifistatshlper_G_band.sh] CONNSTATUS ath0 1 .... not support [CONNSTATUS] ... SERVD: stop service [IP6TFIREWALL] SERVD: service [IP6TFIREWALL] is already stopped. SERVD: start service [IP6TFIREWALL] SERVD: stop service [IP6T.WAN-1] SERVD: start service [IP6T.WAN-1] SERVD: stop service [IP6T.WAN-2] SERVD: start service [IP6T.WAN-2] SERVD: stop service [IP6T.WAN-3] SERVD: start service [IP6T.WAN-3] SERVD: stop service [IP6T.WAN-4] SERVD: start service [IP6T.WAN-4] SERVD: stop service [IP6T.WAN-5] SERVD: service [IP6T.WAN-5] is already stopped. SERVD: start service [IP6T.WAN-5] SERVD: service [IP6T.WAN-5] return error 108. SERVD: stop service [IP6T.WAN-6] SERVD: service [IP6T.WAN-6] is already stopped. SERVD: start service [IP6T.WAN-6] SERVD: service [IP6T.WAN-6] return error 108. SERVD: stop service [IP6T.WAN-7] SERVD: service [IP6T.WAN-7] is already stopped. SERVD: start service [IP6T.WAN-7] SERVD: service [IP6T.WAN-7] return error 108. SERVD: stop service [IP6T.WAN-8] SERVD: service [IP6T.WAN-8] is already stopped. SERVD: start service [IP6T.WAN-8] SERVD: service [IP6T.WAN-8] return error 108. SERVD: stop service [IP6T.LAN-1] SERVD: start service [IP6T.LAN-1] SERVD: stop service [IP6T.LAN-2] SERVD: start service [IP6T.LAN-2] SERVD: stop service [IP6T.LAN-3] SERVD: start service [IP6T.LAN-3] SERVD: stop service [IP6T.LAN-4] SERVD: start service [IP6T.LAN-4] SERVD: stop service [IP6T.LAN-5] SERVD: start service [IP6T.LAN-5] SERVD: stop service [IP6T.LAN-6] SERVD: start service [IP6T.LAN-6] SERVD: stop service [IP6T.LAN-7] SERVD: service [IP6T.LAN-7] is already stopped. SERVD: start service [IP6T.LAN-7] SERVD: service [IP6T.LAN-7] return error 108. SERVD: stop service [IP6T.LAN-8] SERVD: service [IP6T.LAN-8] is already stopped. SERVD: start service [IP6T.LAN-8] SERVD: service [IP6T.LAN-8] return error 108. SERVD: start service [LOG.EMAIL] SERVD: start service [ENLAN] SERVD: service [ENLAN] is already started. SERVD: start service [HTTP.LAN-3] SERVD: start service [UPNP.LAN-3] SERVD: event [UPNP.ALIVE.LAN-3/default] SERVD: start service [NAMERESOLV.LAN-3] SERVD: stop service [STUNNEL] Stop Stunnel service .. SERVD: start service [STUNNEL] __ERROR [STUNNEL.php] cannot find inf LAN-4 Start Stunnel service .. SERVD: stop service [ROUTE6.STATIC] SERVD: start service [ROUTE6.STATIC] SERVD: stop service [ROUTE6.DYNAMIC] SERVD: start service [ROUTE6.DYNAMIC] SERVD: stop service [IP6TSMPSECURITY] SERVD: start service [IP6TSMPSECURITY] SERVD: stop service [IP6TINGRESSFILTER] SERVD: service [IP6TINGRESSFILTER] is already stopped. SERVD: start service [IP6TINGRESSFILTER] SERVD: service [IP6TINGRESSFILTER] return error 9. SERVD: stop service [IP6TOBF] SERVD: service [IP6TOBF] is already stopped. SERVD: start service [IP6TOBF] SERVD: stop service [IP6TDEFCHAIN] SERVD: start service [IP6TDEFCHAIN] SERVD: stop service [RIPD] SERVD: start service [RIPD] SERVD: stop service [LLD2] SERVD: start service [LLD2] SERVD: stop service [HTTP] SERVD: event [HTTP.DOWN] not found! SERVD: start service [HTTP] startup_server:IPV6, is multicast SERVD: event [HTTP.UP] not found! SERVD: stop service [NAMERESOLV] SERVD: start service [NAMERESOLV] SERVD: start service [HTTP] SERVD: service [HTTP] is already started. Run NTP client ... [V6] [] ntpclient -h ntp1.dlink.com -i 5 -s -4


▒ U-Boot 1.1.4 (Feb 14 2017 - 10:15:54) SVN revision: 1372 ap152 - Dragonfly 1.0DRAM: sri ath_ddr_initial_config(278): (ddr2 init) ath_sys_frequency: cpu 775 ddr 650 ahb 258 Tap values = (0xf, 0xf, 0xf, 0xf) 128 MB Top of RAM usable for U-Boot at: 88000000 Reserving 236k for U-Boot at: 87fc4000 Reserving 192k for malloc() at: 87f94000 Reserving 44 Bytes for Board Info at: 87f93fd4 Reserving 36 Bytes for Global Data at: 87f93fb0 Reserving 128k for boot params() at: 87f73fb0 Stack Pointer at: 87f73f98 Now running in RAM - U-Boot at: 87fc4000 Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18 flash size 16MB, sector count = 256 Flash: 16 MB Power up PLL with outdiv = 0 then switch to 3 In: serial Out: serial Err: serial Net: ath_gmac_enet_initialize... No valid address in Flash. Using fixed address ath_gmac_enet_initialize: reset mask:c02200 athr_mgmt_init ::done Dragonfly ----> S17 PHY * athrs17_reg_init: complete SGMII in forced mode Max resets limit reached exiting... athr_gmac_sgmii_setup SGMII done : cfg1 0x80000000 cfg2 0x7114 eth0: 00:03:7f:09:0b:ad eth0 up eth0 Setting 0x181162c0 to 0x4b962100 Hit any key to stop autoboot: 0 Reset button released ## Booting image at 9f080040 ... Image Name: MIPS OpenWrt Linux-4.19.123 Created: 2020-05-18 16:24:06 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1824818 Bytes = 1.7 MB Load Address: 80060000 Entry Point: 80060000 Verifying Checksum at 0x9f080080 ...OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80060000) ... ## Giving linux memsize in bytes, 134217728 Starting kernel ... [ 0.000000] Linux version 4.19.123 (sebastian@sebastian-msi) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13213+1-146e18af56)) #0 Mon May 18 16:24:06 2020 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc) [ 0.000000] MIPS: machine is D-Link DIR-842 C3 [ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x4a8 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 122364K/131072K available (4326K kernel code, 177K rwdata, 1032K rodata, 1240K init, 206K bss, 8708K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 51 [ 0.000000] CPU clock: 775.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns [ 0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns [ 0.008223] Calibrating delay loop... 385.02 BogoMIPS (lpj=770048) [ 0.046730] pid_max: default: 32768 minimum: 301 [ 0.051788] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.058780] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070380] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.080684] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.087244] pinctrl core: initialized pinctrl subsystem [ 0.093653] NET: Registered protocol family 16 [ 0.126876] clocksource: Switched to clocksource MIPS [ 0.133284] NET: Registered protocol family 2 [ 0.138640] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.146823] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.154199] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.160912] TCP: Hash tables configured (established 1024 bind 1024) [ 0.167739] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.173947] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.180927] NET: Registered protocol family 1 [ 0.188498] Crashlog allocated RAM at address 0x3f00000 [ 0.195451] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.208229] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.214422] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.237027] io scheduler noop registered [ 0.241216] io scheduler deadline registered (default) [ 0.248395] pinctrl-single 1804002c.pinmux: 544 pins, size 68 [ 0.255519] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.262933] console [ttyS0] disabled [ 0.266724] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A [ 0.275836] console [ttyS0] enabled [ 0.275836] console [ttyS0] enabled [ 0.283394] bootconsole [early0] disabled [ 0.283394] bootconsole [early0] disabled [ 0.298592] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.303924] 8 fixed-partitions partitions found on MTD device spi0.0 [ 0.310502] Creating 8 MTD partitions on "spi0.0": [ 0.315472] 0x000000000000-0x000000040000 : "u-boot" [ 0.321377] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.327638] 0x000000050000-0x000000060000 : "devdata" [ 0.333615] 0x000000060000-0x000000070000 : "devconf" [ 0.339598] 0x000000070000-0x000000080000 : "misc" [ 0.345317] 0x000000080000-0x000000fd0000 : "firmware" [ 0.356084] 2 seama-fw partitions found on MTD device firmware [ 0.362161] Creating 2 MTD partitions on "firmware": [ 0.367319] 0x000000000040-0x0000001c0000 : "kernel" [ 0.373172] 0x0000001c0000-0x000000f50000 : "rootfs" [ 0.379059] mtd: device 7 (rootfs) set to be root filesystem [ 0.386333] 1 squashfs-split partitions found on MTD device rootfs [ 0.392789] 0x0000004d0000-0x000000f50000 : "rootfs_data" [ 0.399206] 0x000000fd0000-0x000000fe0000 : "art" [ 0.404819] 0x000000fe0000-0x000001000000 : "reserved" [ 0.412675] libphy: Fixed MDIO Bus: probed [ 0.419975] ag71xx 19000000.eth: invalid MAC address, using random address [ 1.059270] libphy: ag71xx_mdio: probed [ 1.066363] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0 [ 1.118874] random: fast init done [ 1.654332] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316] [ 1.665643] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii [ 1.672263] i2c /dev entries driver [ 1.677778] NET: Registered protocol family 10 [ 1.687262] Segment Routing with IPv6 [ 1.691201] NET: Registered protocol family 17 [ 1.695890] 8021q: 802.1Q VLAN Support v1.8 [ 1.701131] PCI host bridge /ahb/pcie-controller@18250000 ranges: [ 1.707493] MEM 0x0000000012000000..0x0000000013ffffff [ 1.712902] IO 0x0000000000000000..0x0000000000000000 [ 1.718479] PCI host bridge to bus 0000:00 [ 1.722760] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff] [ 1.729875] pci_bus 0000:00: root bus resource [io 0x0000] [ 1.735645] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 1.742668] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.752011] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] [ 1.765637] VFS: Mounted root (squashfs filesystem) readonly on device 31:7. [ 1.779941] Freeing unused kernel memory: 1240K [ 1.784646] This architecture does not have kernel memory protection. [ 1.791304] Run /sbin/init as init process [ 2.368583] init: Console is alive [ 2.372387] init: - watchdog - [ 3.301646] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.344128] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.362062] init: - preinit - [ 4.109969] random: jshn: uninitialized urandom read (4 bytes read) [ 4.216247] random: jshn: uninitialized urandom read (4 bytes read) [ 4.541056] random: jshn: uninitialized urandom read (4 bytes read) [ 5.643039] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.649187] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready [ 5.689179] urandom_read: 4 callbacks suppressed [ 5.689186] random: procd: uninitialized urandom read (4 bytes read) Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 6.684193] eth0: link up (1000Mbps/Full duplex) [ 6.689088] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.695919] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 9.891520] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 9.920406] urandom-seed: Seed file not found (/etc/urandom.seed) [ 10.005125] eth0: link down [ 10.026147] procd: - early - [ 10.029293] procd: - watchdog - [ 10.652202] procd: - watchdog - [ 10.655779] procd: - ubus - [ 10.713657] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.752973] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.760860] procd: - init - Please press Enter to activate this console. [ 11.351670] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.459937] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069 [ 11.467728] Backport generated by backports.git v5.4.27-1-0-gf6e8852f [ 11.529262] xt_time: kernel timezone is -0000 [ 11.677514] PPP generic driver version 2.4.2 [ 11.691938] NET: Registered protocol family 24 [ 11.725196] urngd: v1.0.2 started. [ 11.774043] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x56. [ 11.795592] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002) [ 11.802414] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 [ 11.906175] random: crng init done [ 12.469331] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed [ 13.445601] firmware ath10k!QCA9888!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed [ 13.726538] firmware ath10k!QCA9888!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed [ 14.013516] firmware ath10k!QCA9888!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed [ 14.552362] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000 [ 14.561940] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 14.581988] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-fW-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 937128b4 [ 14.918084] ath10k_pci 0000:00:00.0: board_file api 2 bmi_id 0:18 crc32 f228337a [ 16.963759] ath10k_pci 0000:00:00.0: unsupported HTC service id: 1536 [ 16.974036] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 16.981820] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32 [ 17.012361] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 17.023682] ath10k_pci 0000:00:00.0: wmi print 'free: 114524 iram: 12628 sram: 29508' [ 17.258179] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1 [ 17.420079] ath9k 18100000.wmac: Direct firmware load for ath9k-eeprom-ahb-18100000.wmac.bin failed with error -2 [ 17.430730] ath9k 18100000.wmac: Falling back to syfs fallback for: ath9k-eeprom-ahb-18100000.wmac.bin [ 18.148910] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2 [ 18.182526] kmodloader: done loading kernel modules from /etc/modules.d/* [ 39.994971] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 40.014447] jffs2_build_filesystem(): unlocking the mtd device... [ 40.014453] done. [ 40.022901] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 40.245007] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.304205] device eth0 entered promiscuous mode [ 40.320318] br-lan: port 1(eth0.1) entered blocking state [ 40.325957] br-lan: port 1(eth0.1) entered disabled state [ 40.331853] device eth0.1 entered promiscuous mode [ 40.407303] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 40.479437] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready [ 41.276234] eth0: link up (1000Mbps/Full duplex) [ 41.292844] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.317086] br-lan: port 1(eth0.1) entered blocking state [ 41.322701] br-lan: port 1(eth0.1) entered forwarding state [ 41.328846] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [ 41.429443] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready BusyBox v1.31.1 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt SNAPSHOT, r13272-367a30389d ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:/#


Space for additional notes, links to forum threads or other resources.

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2021/01/23 16:44
  • by didi1357