The DIR-510L Travel Router is based on the MT7620A SoC. It has two wireless radios, an 802.11b/g/n radio integrated into the MT7620A and a 802.11a/b/g/n/ac radio on another IC. It has two USB 2.0 Type A ports and one micro-USB port for power/charging. It also has an internal 4000mAH Li-Ion battery pack.
→ Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.
The default network configuration is:
LAN & WiFi
→ hardware.button on howto use and configure the hardware button(s).
Here, we merely name the buttons, so we can use them in the above Howto.
The D-LinkDIR-510L has the following buttons and their original function:
The DIR-510L has two, bi-color LEDs (Red/Green). The LEDs are arranged such that such that they can output 3 colors - Green (Green = On, Red = Off), Red (Green = Off, Red = On), and Orange (Green = On, Red = On). The 'Power/Status' LED is configurable, but the 'Battery' LED seems to be locked to only report battery status.
/dev/root on / type squashfs (ro,relatime)
none on /proc type proc (rw,relatime)
none on /ram type tmpfs (rw,relatime)
none on /proc/bus/usb type usbfs (rw,relatime)
none on /sys type sysfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
/dev/mtdblock6 on /usr/www type squashfs (ro,relatime)
/dev/mtdblock4 on /usr/mydlink type squashfs (ro,relatime)
toh/d-link/d-link_dir-510l_a1.txt · Last modified: 2019/10/26 07:38 by tmomas