Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:d-link:d-link_dap-2660 [2020/09/30 19:50] – [Hardware highlights] s_2toh:d-link:d-link_dap-2660 [2021/01/19 23:16] – [D-Link DAP-2660] s_2
Line 2: Line 2:
 ~~NOTOC~~ ~~NOTOC~~
  
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page . */ +The DAP-2660 is an AC1200 Wall-Mount PoE Access Point from the [[toh:d-link:d-link_dap_series_of_business_access_points|D-Link DAP Series of Business Access Points]]manufactured by Alpha Networks
- +
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} +
- +
-//Write a short, relevant description of the device. Include a technical overviewbut avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//+
  
 /*****/ /*****/
Line 17: Line 13:
 ===== OpenWrt support ===== ===== OpenWrt support =====
  
-<color red>**Not supported.**</color>+<color green>Supported</color>
  
  
-/*** if info available: uncomment and fill in 
 ===== Supporting activities ===== ===== Supporting activities =====
-//Describe if there are any ongoing activities that might lead to OpenWrt support.// +  * Supported since: [[commit>?p=openwrt/openwrt.git;a=commit;h=8ec997d0063bbc1ac41d1025f4c94ae6337899fa]] 
- +  * OpenWrt forum thread: https://forum.openwrt.org/t/ath79-support-d-link-dap-2660-ethernet-not-working-in-gigabit-mode/71892 
-  * OpenWrt forum thread: (add link) +  Pull Request: https://github.com/openwrt/openwrt/pull/3471
-***/+
  
  
Line 106: Line 100:
  
  
 +==== LEDs ====
 +
 +^ LED ^ GPIO ^
 +| power green  |  23  |
 +| power red  |  14  |
  
 ===== Hardware ===== ===== Hardware =====
 +/**
 ==== Info ==== ==== Info ====
 ^ Architecture     | EXAMPLE MIPS                             | ^ Architecture     | EXAMPLE MIPS                             |
Line 123: Line 123:
 ^ Serial           | EXAMPLE [[#Serial|Yes]]                  | ^ Serial           | EXAMPLE [[#Serial|Yes]]                  |
 ^ JTAG             | EXAMPLE [[#JTAG|Not populated]]          | ^ JTAG             | EXAMPLE [[#JTAG|Not populated]]          |
 +**/
  
- 
-/*** if info available: uncomment and fill in 
 ==== Flash Layout ==== ==== Flash Layout ====
-<WRAP BOX> +^ start ^ size ^ label ^ 
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_squashfs-images|example]]).// +0x00000000 | 0x00040000 (256k) bootloader | 
- +| 0x00040000 | 0x00010000 (64k| bdcfg | 
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. +| 0x00050000 | 0x00010000 (64k) | rgdb | 
-</WRAP> +0x00060000 | 0x00010000 (64k) | unknown | 
-***/+| 0x00070000 | 0x00ee0000 (15232k) | firmware | 
 +| 0x00f50000 | 0x00020000 (128k) | langpack | 
 +| 0x00f70000 | 0x00070000 (448k) | captival | 
 +| 0x00fe0000 | 0x00010000 (64k) | certificate | 
 +| 0x00ff0000 | 0x00010000 (64k) | art |
  
  
Line 141: Line 144:
 /* Thanks, your wiki administration - Oct. 2015 */ /* Thanks, your wiki administration - Oct. 2015 */
  
-**Insert photo of front of the casing** +{{http://sebastianschaper.net/openwrt/dap-2660_pcb.jpg?500x0}}
- +
-**Insert photo of back of the casing** +
- +
-**Insert photo of backside label** +
- +
-**Insert photo of PCB**+
  
 ==== Opening the case ==== ==== Opening the case ====
Line 176: Line 173:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki> 
 +U-Boot 1.1.4 (Jan 26 2014 - 16:16:52) 
 + 
 +ap135 - Scorpion 1.0 
 +ALPHA U-boot v1.00rc002 
 +DRAM: 
 +sri 
 +Scorpion 1.0 
 +ath_ddr_initial_config(178): (32bit) ddr2 init 
 +tap = 0x00000003 
 +Tap (low, high) = (0x2, 0x1d) 
 +Tap values = (0xf, 0xf, 0xf, 0xf) 
 +128 MB 
 +Top of RAM usable for U-Boot at: 88000000 
 +Reserving 243k for U-Boot at: 87fc0000 
 +Reserving 192k for malloc() at: 87f90000 
 +Reserving 44 Bytes for Board Info at: 87f8ffd4 
 +Reserving 36 Bytes for Global Data at: 87f8ffb0 
 +Reserving 128k for boot params() at: 87f6ffb0 
 +Stack Pointer at: 87f6ff98 
 +Now running in RAM - U-Boot at: 87fc0000 
 +Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18 
 +flash size 16MB, sector count = 256 
 +Flash: 16 MB 
 +*** Warning - bad CRC, using default environment 
 + 
 +*** Warning *** : PCIe WLAN Module not found !!! 
 +In:    serial 
 +Out:   serial 
 +Err:   serial 
 +Net:   ath_gmac_enet_initialize... 
 +athrs_sgmii_res_cal: cal value = 0xe 
 +ath_gmac_enet_initialize: reset mask:c02200 
 +Scorpion ---->f1e PHY* 
 +: cfg1 0x80000000 cfg2 0x7114 
 +eth0: 00:03:7f:09:0b:ad 
 +ATHR_AUTONEG_ADVERT:DE1 
 +ATHR_1000BASET_CONTROL:200 
 +ATHR_PHY_CONTROL:1000 
 +ATHRSF1_PHY: Port 4, Neg Success 
 +ATHRSF1_PHY: unit 0 phy addr 4 eth0 up 
 +eth0 
 +Setting 0x18116290 to 0x60c0214f 
 +press 'q' to stop autoboot: 
 +## Booting image at 9f070000 ... 
 +   Image Name:   7zip Linux Kernel 
 +   Created:      1970-01-01   0:00:00 UTC 
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
 +   Data Size:    -1 Bytes = 4096 MB 
 +   Load Address: 80002000 
 +   Entry Point:  80002000 
 +   Uncompressing Kernel Image with LZMA ... 
 + 
 + Check Image ... 
 + 
 +Image OK! 
 +OK 
 +No initrd 
 +## Transferring control to Linux (at address 80002000) ... 
 +## Giving linux memsize in bytes, 134217728 
 + 
 +Starting kernel ... 
 + 
 +Booting QCA955x 
 +Linux version 2.6.31--LSDK-10.2.85 (release@cdWSCMPL06) (gcc version 4.3.3 (GCC) ) #1 Fri Jul 29 13:44:49 CST 2016 
 +flash_size passed from bootloader = 16 
 +CPU revision is: 00019750 (MIPS 74Kc) 
 +cpu apb ddr apb ath_sys_frequency: cpu 720 ddr 600 ahb 200 
 +Determined physical RAM map: 
 + memory: 02000000 @ 00000000 (usable) 
 +User-defined physical RAM map: 
 + memory: 08000000 @ 00000000 (usable) 
 +Initrd not found or empty - disabling initrd 
 +Zone PFN ranges: 
 +  Normal   0x00000000 -> 0x00008000 
 +Movable zone start PFN for each node 
 +early_node_map[1] active PFN ranges 
 +    0: 0x00000000 -> 0x00008000 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512 
 +Kernel command line: console=ttyS0,115200 root=/dev/mtdblock0 rw mem=128m 
 +PID hash table entries: 512 (order: 9, 2048 bytes) 
 +Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +Writing ErrCtl register=00000000 
 +Readback ErrCtl register=00000000 
 +Memory: 112512k/131072k available (2171k kernel code, 18376k reserved, 478k data, 144k init, 0k highmem) 
 +NR_IRQS:128 
 +plat_time_init: plat time init done 
 +Calibrating delay loop... 359.42 BogoMIPS (lpj=718848) 
 +Mount-cache hash table entries: 512 
 + 
 +****************ALLOC*********************** 
 + Packet mem: 802ce6c0 (0xe00000 bytes) 
 +******************************************** 
 + 
 +NET: Registered protocol family 16 
 +ath_pcibios_init: bus 0 
 +ath_pcibios_init(232): PCI 0 CMD write: 0x356 
 +registering PCI controller with io_map_base unset 
 +bio: create slab <bio-0> at 0 
 +pcibios_map_irq: IRQ 75 for bus 0 
 +NET: Registered protocol family 2 
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP established hash table entries: 4096 (order: 3, 32768 bytes) 
 +TCP bind hash table entries: 4096 (order: 2, 16384 bytes) 
 +TCP: Hash tables configured (established 4096 bind 4096) 
 +TCP reno registered 
 +NET: Registered protocol family 1 
 +ATH GPIOC major 0 
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +msgmni has been set to 220 
 +io scheduler noop registered 
 +io scheduler deadline registered (default) 
 +Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A 
 +console [ttyS0] enabled 
 +brd: module loaded 
 +ELBOX CFI physmap flash device: 1000000 at 9f000000 
 + ATH serial flash !! 
 +ath-nor0: squashfs filesystem found at offset 0x00160000 
 +Creating 11 MTD partitions on "ath-nor0": 
 +0x0000001600c0-0x000000a420c0 : "rootfs" 
 +0x000000070000-0x000000f50000 : "upgrade" 
 +0x000000050000-0x000000060000 : "rgdb" 
 +0x000000040000-0x000000050000 : "bdcfg" 
 +0x000000f50000-0x000000f70000 : "langpack" 
 +0x000000fe0000-0x000000ff0000 : "certificate" 
 +0x000000ff0000-0x000001000000 : "radiocfg" 
 +0x000000000000-0x000001000000 : "flash" 
 +0x000000000000-0x000000040000 : "bootloader" 
 +0x000000040000-0x000000050000 : "boot config" 
 +0x000000f70000-0x000000fe0000 : "captival" 
 +u32 classifier 
 +    Actions configured 
 +arp_tables: (C) 2002 David S. Miller 
 +TCP cubic registered 
 +NET: Registered protocol family 10 
 +IPv6 over IPv4 tunneling driver 
 +NET: Registered protocol family 17 
 +Bridge firewalling registered 
 +Ebtables v2.0 registered 
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> 
 +All bugs added by David S. Miller <davem@redhat.com> 
 +athwdt_init: Registering WDT success 
 +ath_otp_init: Registering OTP success 
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:0. 
 +Freeing unused kernel memory: 144k freed 
 +init started: BusyBox v1.14.1 (2016-07-29 13:44:57 CST) 
 +starting pid 133, tty '': '/etc/init.d/rcS' 
 +[/etc/init.d/S03config.sh] 
 +Mounting proc and var ... 
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/10 
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +Inserting modules ... 
 +Inserting Rebootm ... 
 +Rebootm loading ... 
 +Inserting atheros ethernet ... 
 +qca955x_GMAC: Length per segment 1536 
 +955x_GMAC: qca955x_gmac_attach 
 +955x_GMAC: qca955x_set_gmac_caps 
 +Currently in polling mode unit0 
 +mac0 registering f1e ..... 
 +qca955x_GMAC: RX TASKLET - Pkts per Intr:160 
 +qca955x_GMAC: Mac address for unit 0:bfff0000 
 +qca955x_GMAC: ff:ff:ff:ff:ff:ff 
 +qca955x_GMAC: Max segments per packet :   1 
 +qca955x_GMAC: Max tx descriptor count :   128 
 +qca955x_GMAC: Max rx descriptor count :   224 
 +qca955x_GMAC: Mac capability flags    :   2200 
 +Inserting gpio ... 
 +GPIO driver initialized. 
 +done. 
 +Inserting watchdog ... 
 +External watchdog loading ... 
 +Enable external watch dog with gpio 20 clear 
 +Start xmldb ... 
 +[/etc/scripts/misc/profile.sh] getnew ... 
 +[/etc/scripts/misc/defnodes.sh] ... 
 +[/etc/defnodes/S10setext.sh] ... 
 +PHP [/etc/defnodes/S11setnodes.php] ... 
 +PHP [/etc/defnodes/S12features.php] ... 
 +PHP [/etc/defnodes/S13flashspeed.php] ... 
 +PHP [/etc/defnodes/S20setnodes.php] ... 
 +mount: mounting /dev/mtdblock/4 on /www/locale/alt failed: Invalid argument 
 +PHP [/etc/defnodes/S40brand.php] ... 
 +[/etc/scripts/misc/defnodes.sh] Done !! 
 +[/etc/templates/timezone.sh] ... 
 +[/etc/templates/logs.sh] ... 
 +[/var/run/logs_run.sh] ... 
 +gpio set led status 
 +[/etc/templates/powerled.sh] ... 
 +[/var/run/powerled_run.sh] ... 
 +athr_gmac_ring_alloc Allocated 2048 at 0x879e5800 
 +sram_desc_cnt 1536,mac Unit 0,Tx r->ring_desc 0xbd000000 
 +athr_gmac_ring_alloc Allocated 3584 at 0x879bf000 
 +sram_desc_cnt 4224,mac Unit 0,Rx r->ring_desc 0xbd000600 
 +955x_GMAC: eth0 in RGMII MODE 
 +Scorpion -----> 8035 PHY 
 +Setting Drop CRC Errors, Pause Frames and Length Error frames 
 +Setting PHY... 
 +ATHR_AUTONEG_ADVERT:DE1 
 +ATHR_1000BASET_CONTROL:200 
 +ATHR_PHY_CONTROL:1000 
 +ATHRSF1_PHY: Port 4, Neg Success 
 +ATHRSF1_PHY: unit 0 phy addr 4 955x_GMAC: Enet Unit:0 PHY:0 is UP eth0 RGMII 100Mbps full duplex 
 +955x_GMAC: qca955x_soc_gmac_set_mac_duplex 
 +955x_GMAC: qca955x_soc_gmac_set_link Done 
 +955x_GMAC: done cfg2 0x7115 ifctl 0x10000 miictrl 
 +955x_GMAC: eth0 in RGMII MODE 
 +Scorpion -----> 8035 PHY 
 +Setting Drop CRC Errors, Pause Frames and Length Error frames 
 +955x_GMAC: qca955x_soc_gmac_set_mac_duplex 
 +955x_GMAC: qca955x_soc_gmac_set_link Done 
 +**************************lpbk test pass ************************** 
 +955x_GMAC: unit 0: phy 0 not up carrier 1 
 +[/etc/init.d/S03config.sh] done! 
 +[/etc/init.d/S10system.sh] 
 +Write some proc file ... 
 +Enable panic timeout when Kernel panic ... 
 +start Layout ... 
 +[/etc/scripts/layout.sh] start ... 
 +[/var/run/layout_start.sh] ... 
 +Start bridge layout ... 
 +device eth0 entered promiscuous mode 
 +start LAN ... 
 +[/etc/templates/lan.sh] ... 
 +[/var/run/lan_start.sh] ... 
 +Bridge mode selected, LAN is disabled ! 
 +start web server ... 
 +[/etc/templates/webs.sh] start ... 
 +[/var/run/webs_start.sh] ... 
 +Starting HTTPD ... 
 +nvram: not found 
 +nvram: not found 
 +start eth0 vlan setup ... 
 +[/etc/scripts/eth_vlan.sh] start ... 
 +[/var/run/eth0_vlan_start.sh] ... 
 + disable VLAN 
 +#!/bin/sh 
 +limitedadmin.sh... 
 +[/etc/scripts/eth_vlan.sh] start ... 
 +[/var/run/eth0_vlan_stop.sh] ... 
 +[/var/run/eth0_vlan_start.sh] ... 
 + disable VLAN 
 +#!/bin/sh 
 +pingctl.sh... 
 +start fresetd ... 
 +rxcheck: not found 
 +enable LAN ports ... 
 +Factory reset time : 5 secs 
 +System reset time  : 1 secs 
 +WPS command : [/etc/templates/wps.sh pbc &] 
 +[/etc/scripts/enlan.sh] ... 
 + Generate channel table according to the country code... 
 +generate country domain mapping table 
 + Generate VLAN table according to the port... 
 +start WAN ... 
 +Set WAN port media type 0 
 +slinktype: not found 
 +[/etc/templates/wan.sh] start ... 
 +[/var/run/eth0_vlan_start.sh] ... 
 + disable VLAN 
 +[/var/run/wan_start.sh] ... 
 +Bridge mode selected ! 
 +Start WAN(br0),192.168.178.20/255.255.255.0 ... 
 +[/etc/templates/wanup.sh] ... 
 +[/var/run/wan_up.sh] ... 
 +[/etc/templates/ntp.sh] ... 
 +killall: ntpclient: no process killed 
 +NTP client is disabled ... 
 +[/etc/templates/upnpd.sh] ... 
 +[/var/run/upnpd_start.sh] ... 
 +UPNP function is not enabled !! 
 +/etc/templates/webredirect.sh: not found 
 +[/usr/sbin/submit] CAPTIVAL_PORTAL ... 
 +[/var/run/captival_portal_stop.sh] ... 
 +captival portal already stop 
 +[/var/run/captival_portal_start.sh] ... 
 +captival_state 0 
 +captival portal is disable 
 +>>>/var/run/wan_start.sh: Start IPv6 configuration >>> 
 +Disable IPv6. 
 +<<< End of IPv6 <<< 
 +captival_tar prep ... 
 +remains :457216bytes 
 +nvram: not found 
 +nvram: not found 
 +start stunnel ... 
 +[/etc/templates/stunnel.sh] ... 
 +Setting certificate. 
 +[/var/run/stunnel_start.sh] ... 
 +Starting universal SSL tunnel: stunnel. 
 +Enable wlan restart  ... 
 +start WLAN ... 
 +wlanRestart: not found 
 +[/etc/templates/wlan.sh] ... 
 +SERVD: stop service [WLAN] 
 +SERVD: service [WLAN] is already stopped. 
 +SERVD: start service [WLAN] 
 +start telnet daemon ... 
 +[/etc/templates/wlan_run.sh] start ... 
 +Start telnetd ... 
 +nvram: not found 
 +nvram: not found 
 +start SSHD daemon ... 
 +[/etc/templates/sshd.sh] ... 
 +[/etc/templates/autorekey.sh] ... 
 +[/var/run/autorekey_start_a.sh] ... 
 +[/var/run/autorekey_start_g.sh] ... 
 +[/var/run/sshd_start.sh] ... 
 +start sshd ... 
 +Disable start-up daemon: sshd. 
 +start DHCP server 
 +[/etc/templates/dhcpd.sh] ... 
 +start WLAN ..... 
 +[/var/run/dhcpd_restart.sh] ... 
 +Stop DHCP server (br0) ... 
 +Start DHCP server (br0) ... 
 +DHCP server is disabled! 
 +start SNMP ... 
 +[/etc/templates/snmp.sh] ... 
 +[/var/run/snmp_start.sh] ... 
 +Start SNMP daemon ... 
 +start cwmHelper ... 
 +start NEAP ... 
 +[/etc/templates/certs/certscmd.sh] ... 
 +[/etc/templates/neaps.sh] start ... 
 +central wifi manager is not enable ,cwmHelper quit 
 +DEVCONF: unable to read config data (ret=-3) ! 
 +Getting External certificate for hostapd & wpa_supplicant. Fail! 
 +[/var/run/wlan_insmod.sh] ... 
 +[/var/run/neaps_start.sh] ... 
 +Start Neap Server ... 
 +adf: module license 'Proprietary' taints kernel. 
 +Disabling lock debugging due to kernel taint 
 +start NEAPC ... 
 +[/etc/templates/neapc.sh] start ... 
 +[/var/run/neapc_start.sh] ... 
 +Start NeapC Client ... 
 +Stop apneaps Server ... 
 +: not found 
 +start APNEAPS_V2 ... 
 +[/etc/templates/apneaps_v2.sh] start ... 
 +Stop apneaps_v2 Server ... 
 +start AUTORFC ... 
 +[/etc/templates/autorf.sh] start ... 
 +############## snmp beacon oid init ############## 
 +############## snmp init ############## 
 +Stop autorf client ... 
 +start LOADBALANCE ... 
 +[/etc/templates/loadbalance.sh] start ... 
 +[/var/run/loadbalance_start.sh] ... 
 +start Microsoft LLDP ... 
 +[/etc/templates/lld2d.sh] ... 
 +[/var/run/lld2d_start.sh] ... 
 +Start LLD2 daemon ... 
 +start Ethlink ... 
 +start Trap Monitor ... 
 +ath_hal: 0.9.17.1 (AR5416, AR9380, DEBUG, REGOPS_FUNC, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D) 
 +[/etc/templates/arpspoofing.sh] start ... 
 +ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved 
 +[/var/run/arpspoofing_start.sh] ... 
 +Start arp spoofing prevention ... 
 +arp spoofing prevention is disabled. 
 +#!/bin/sh 
 +netfilter.sh... 
 +netfilter_flag:
 +start DHCP multicast to unicast ... 
 +#!/bin/sh 
 +ath_dfs: Version 2.0.0 
 +Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved 
 +getaddrinfo:  Name or service not known 
 +Creating directory: /var/net-snmp 
 +dhcp_mc2uc.sh... 
 +[/etc/init.d/S10system.sh] done! 
 +rcS done! 
 + 
 +Please press Enter to activate this console. NET-SNMP version 5.4.1 
 +ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved 
 +ath_ahb: 10.2-00082-4 (Atheros/multi-bss) 
 +__ath_attach: Set global_scn[0] 
 +*** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead *** 
 +ACBKMinfree = 48 
 +ACBEMinfree = 32 
 +ACVIMinfree = 16 
 +ACVOMinfree = 0 
 +CABMinfree = 48 
 +UAPSDMinfree = 0 
 +ATH_TXBUF=512 
 +Bootstrap clock 40MHz 
 +Enterprise mode: 0x40000000 
 +Restoring Cal data from Flash 
 +Green-AP : Green-AP : Attached 
 + 
 +ath_get_caps[6164] rx chainmask mismatch actual 3 sc_chainmak 0 
 +ath_get_caps[6139] tx chainmask mismatch actual 3 sc_chainmak 0 
 +ath_attach_dfs[12582] dfsdomain 1 
 +wifi0: Atheros 955X: mem=0xb8100000, irq=2 
 +ath_pci: 10.2-00082-4 (Atheros/multi-bss) 
 +ath_pci_probe 
 +PCI device id is 003c :003c 
 +ath_pci 0000:00:00.0: ath DEBUG: sc=0x87b13800 
 + 
 + ol_ath_pci_configure : num_desired MSI set to 0 
 + 
 + Using PCI Legacy Interrupt 
 +__ol_ath_attach: ath_attach TODO 
 +__ol_ath_attach: dev name wifi1 
 +ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) 
 + OL_ACBKMinfree : 0 
 + OL_ACBEMinfree : 0 
 + OL_ACVIMinfree : 0 
 + OL_ACVOMinfree : 0 
 +ol_ath_attach() BMI inited. 
 +ol_ath_attach() BMI Get Target Info. 
 +ol_ath_attach() TARGET TYPE: 7 Vers 0x4100016c 
 +NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 
 +ol_ath_attach() configure Target . 
 +qc98xx_verify_checksum: flash checksum passed: 0x2b94 
 +ol_transfer_bin_file 1891: Download Flash data len 2116 
 +QCA98xx CtlData 5G override 
 +ol_transfer_bin_file 1836: Download Firmware data len 229496 
 +ol_ath_attach() Download FW. 
 +ol_ath_attach() HT Create . 
 +ol_ath_attach() HIF Claim. 
 +ol_ath_attach() BMI Done. 
 +ol_ath_attach() WMI attached. wmi_handle 86590000 
 ++HWT 
 +CE_recv_buf_enqueue 653 Populate last entry 512 for CE 5 
 +CE_recv_buf_enqueue 662 CE 5 wi 511 dest_ptr 0x556ee0 nbytes 0 recv_ctxt 0x8658b3a0 
 +-HWT 
 +HTC Service:0x0300 ep:1 TX flow control disabled 
 +CE_pkt_dl_len_set CE 4 Pkt download length 64 
 +ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from 86740000 
 +HTC Service:0x0100 ep:2 TX flow control disabled 
 +wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event 
 +num_rf_chain : 00000002 
 +ht_cap_info: : 0000085b 
 +vht_cap_info : 338001b2 
 +vht_supp_mcs : 0000fffa 
 +LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256 
 +idx 0 req 1  num_units 0 num_unit_info 2 unit size 444 actual units 145 
 +chunk 0 len 64380 requested ,ptr  0x6750000 
 +FIRMWARE:P 145 V 16 T 443 
 + 
 +FIRMWARE:_wlan_rtt_enable 
 +wmi_ready_event_rx:  WMI UNIFIED READY event 
 +ol_ath_connect_htc() WMI is ready 
 +ol_ath_set_host_app_area TODO 
 +target uses HTT version 2.1; host uses 2.1 
 +ol_ath_attach() connect HTC. 
 +bypasswmi : 0 
 +ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 
 +ol_regdmn_init_channels: isEIRP=0 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 
 +ol_regdmn_init_channels: isEIRP=0 
 +ol_regdmn_init_channels: isEIRP=0 
 +ol_regdmn_init_channels: isEIRP=0 
 +ol_regdmn_init_channels: isEIRP=0 
 +ol_regdmn_init_channels: isEIRP=0 
 +ol_regdmn_init_channels: isEIRP=0 
 +ol_regdmn_init_channels: isEIRP=0 
 +Add VHT80 channel: 5210 
 +Add VHT80 channel: 5775 
 +Skipping VHT80 channel 5825 
 +ol_ath_phyerr_attach: called 
 +OL Resmgr Init-ed 
 +Green-AP : Green-AP : Attached 
 + 
 +Green-AP : Attached 
 +ol_if_dfs_setup: called 
 +ol_if_dfs_attach: called; ptr=86739974, radar_info=87907bd0 
 +ol_ath_rtt_meas_report_attach: called 
 +ol_ath_attach() UMAC attach . 
 +ol_if_dfs_configure: called 
 +ol_if_dfs_configure: FCC domain 
 +ol_if_dfs_disable: called 
 +ol_ath_attach: Calling ol_if_dfs_configure 
 +__ol_ath_attach: init tx/rx TODO 
 +__ol_ath_attach: hard_header_len reservation 58 
 +Initializing Pktlogs for 11ac 
 +[/var/run/wlan_start.sh] ... 
 +ath_attach_dfs[12582] dfsdomain 1 
 +wlan_vap_create : enter. devhandle=0x86550360, opmode=IEEE80211_M_HOSTAP, flags=0x1 
 +wlan_vap_create : exit. devhandle=0x86550360, opmode=IEEE80211_M_HOSTAP, flags=0x1. 
 +VAP device ath0 created 
 +ath0 
 +Start WLAN interface ath0 ... 
 +sc nodebug 0 
 +Interface doesn't accept private ioctl... 
 +ForBiasAuto (8BE0): Operation not permitted 
 +====essid: 
 + DES SSID SET=CyberNetA 
 +CyberNetA,len:9,Set freq vap stop send + 87bc4000 
 +path:/var/run/atSet freq vap stop send -87bc4000 
 +h0.ssid==== 
 +Set wait done --87bc4000 
 + ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 
 +[/var/run/wlan_start.sh] ... 
 +isCountryCodeValid: EEPROM regdomain 0x0 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 
 +ol_regdmn_init_channels: isEIRP=1 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 
 +ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 
 +ol_regdmn_init_channels: isEIRP=1 
 +ol_regdmn_init_channels: isEIRP=1 
 +ol_regdmn_init_channels: isEIRP=1 
 +ol_regdmn_init_channels: isEIRP=1 
 +ol_regdmn_init_channels: isEIRP=1 
 +ol_regdmn_init_channels: isEIRP=1 
 +ol_regdmn_init_channels: isEIRP=1 
 +Add VHT80 channel: 5210 
 +Add VHT80 channel: 5290 
 +Add VHT80 channel: 5530 
 +Add VHT80 channel: 5610 
 +Skipping VHT80 channel 5660 
 +Skipping VHT80 channel 5680 
 +Skipping VHT80 channel 5700 
 +ath_ioctl: SIOC80211IFCREATE CALLED 
 +ap vap with real mac 
 +wmi_unified_vdev_create_send: ID = 0 VAP Addr = 54:b8:0a:35:08:98: 
 +Setting dscp for vap id: 0 
 +VAP device ath16 created 
 +ath16 
 +Start WLAN interface ath16 ... 
 +====essid: 
 + DES SSID SET=CyberNetX 
 +CyberNetX,len:9,Set freq vap stop send + 85e20000 
 +path:/var/run/atOL vap_stop + 
 +h16.ssid==== 
 +wmi_unified_vdev_stop_send for vap 0 (86590000) 
 +OL vap_stop - 
 +STOPPED EVENT for vap 0 (86590000) 
 +Set freq vap stop send -85e20000 
 +Set wait done --85e20000 
 + ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 
 +[/var/run/wlan_start.sh] ... 
 +sleep 2..... 
 +FWLOG: [41452] WHAL_SMARTANT_CONFIGURE ( 0x1, 0x8 ) 
 +FWLOG: [41452] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 ) 
 +FWLOG: [41452] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 ) 
 +FWLOG: [41452] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 ) 
 +FWLOG: [41452] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 ) 
 +FWLOG: [41458] WHAL_ERROR_RECV_STOPPCU ( 0x110298a, 0x3 ) 
 +FWLOG: [41458] WHAL_ERROR_RESET_PM (  ) 
 +FWLOG: [41581] WHAL_SMARTANT_CONFIGURE ( 0x0, 0x0 ) 
 +FWLOG: [42185] WHAL_SMARTANT_CONFIGURE ( 0x1, 0x0 ) 
 +[/var/run/wlan_device_up.sh] ... 
 +UP 2.4G interface ! 
 +device ath0 entered promiscuous mode 
 +ALPHA:[Wireless] 2.4G:Initiate Wireless success 
 +ALPHA:[SNMP-TRAP][Specific=7] 
 +br0: port 2(ath0) entering forwarding state 
 +====essid: 
 + DES SSID SET=CyberNetA 
 +CyberNetA,len:9,path:/var/run/ath0.ssid==== 
 +Filter Accept CHLOAD Param Over RSSI ---Chan 6    cur 241 min 246 delta -5  allowed 10 
 + Best Channel Selected 6 rssi 246 nf -107 UP 5G interface ! 
 +OL vap_stop + 
 +wmi_unified_vdev_stop_send for vap 0 (86590000) 
 +OL vap_stop - 
 +STOPPED EVENT for vap 0 (86590000) 
 +wmi_unified_scan_start_send for vap 0 (86590000) 
 +device ath16 entered promiscuous mode 
 +ALPHA:[Wireless] 5G:Initiate Wireless success 
 +ALPHA:[SNMP-TRAP][Specific=7] 
 +br0: port 3(ath16) entering forwarding state 
 +====essid: 
 + DES SSID SET=CyberNetX 
 +CyberNetX,len:9,path:/var/run/ath16.ssid==== 
 +osif_vap_init: Timeout waiting for vap to stop...returning 
 +Filter Accept CHLOAD Param Over RSSI ---Chan 116    cur 18 min 18 delta 0  allowed 10 
 + Filter Accept CHLOAD Param Over RSSI ---Chan 120    cur 22 min 18 delta 4  allowed 10 
 + Filter Accept CHLOAD Param Over RSSI ---Chan 124    cur 26 min 18 delta 8  allowed 10 
 + Filter Accept REGPOWER Param Over CH LOAD ---Chan 116    cur 2 min 0 delta 2  allowed 10 
 + Filter Accept REGPOWER Param Over CH LOAD ---Chan 120    cur 1 min 0 delta 1  allowed 10 
 + Filter Accept REGPOWER Param Over CH LOAD ---Chan 124    cur 0 min 0 delta 0  allowed 10 
 + Filter Accept RSSI TOTOAL Param Over REG POWER ---Chan 116    cur 30 min 30 delta 0  allowed 0 
 + Filter Accept RSSI TOTOAL Param Over REG POWER ---Chan 120    cur 30 min 30 delta 0  allowed 0 
 + Filter Accept RSSI TOTOAL Param Over REG POWER ---Chan 124    cur 30 min 30 delta 0  allowed 0 
 + OL vap_start + 
 +wmi_unified_vdev_start_send for vap 0 (86590000) 
 +OL vap_start - 
 +ol_vdev_start_resp_ev for vap 0 (86590000) 
 +ol_ath_vap_join: join operation is only for STA/IBSS mode 
 +ol_ath_wmm_update: 
 +ol_if_dfs_configure: called 
 +ol_if_dfs_configure: ETSI domain 
 +ol_if_dfs_disable: called 
 +ol_if_dfs_enable: called 
 +cac_start chan 5580 timeout 612 sec, curr time: 4294712 sec 
 +Notification to UMAC VAP layer 
 +br0: port 3(ath16) multicast bandwidth all 
 +br0: port 2(ath0) multicast bandwidth all 
 +br0: port 1(eth0) multicast bandwidth all 
 +Start hostapd ... 
 +[/etc/templates/lld2d.sh] ... 
 +[/var/run/lld2d_stop.sh] ... 
 +Stop LLD2 daemon ... 
 +[/var/run/lld2d_start.sh] ... 
 +Start LLD2 daemon ... 
 +[/var/run/vlan_stop.sh] ... 
 +[/var/run/vlan_start.sh] ... 
 +[/var/run/eth0_vlan_stop.sh] ... 
 +[/var/run/eth0_vlan_start.sh] ... 
 + disable VLAN 
 +[/usr/sbin/submit] CAPTIVAL_PORTAL ... 
 +Configuration fi ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1 
 +le: /var/run/hostapd.ath0.ap_bss 
 +[/var/run/captival_portal_stop.sh] ... 
 +captival portal already stop 
 +[/var/run/captival_portal_start.sh] ... 
 +captival_state 0 
 +captibr0: port 2(ath0) entering disabled state 
 +val portal is diALPHA:[SNMP-TRAP][Specific=13] 
 +sable 
 +[/usr/sbin/submit] LOADBALANCE ... 
 + DEVICE IS DOWN ifname=ath0 
 +ath0: Could not  DEVICE IS DOWN ifname=ath0 
 +connect to kernel driver 
 +Using interface ath0 with hwaddr 54:b8:0a:35:08:90 and ssid 'CyberNetA' 
 +[/etc/templates/loadbalance.sh] restart ... 
 +[/var/run/loadbalance_stop.sh] ... 
 +[/usr/sbin/submit] QOS_TC_TM ... 
 +Stop loadbalance ... 
 +lo        no wireless extensions. 
 + 
 +sit0      no wireless extensions. 
 + 
 +eth0      no wireless extensions. 
 + 
 +br0       no wireless extensions. 
 + 
 +wifi0     no wireless extensions. 
 + 
 +wifi1     no wireless extensions. 
 + 
 +[/var/run/loadbalance_start.sh] ... 
 +[/var/run/tc_monitor_stop.sh] ... 
 +tc monitor already stop 
 +ALPHA:[Wireless] 2.4G:Initiate Wireless success 
 +ALPHA:[SNMP-TRAP][Specific=7] 
 +br0: port 2(ath0) entering forwarding state 
 +Configuration fi ieee80211_ioctl_siwmode: imr.ifm_active=643, new mode=3, valid=1 
 +le: /var/run/hoswmi_unified_vdev_stop_send for vap 0 (86590000) 
 +tapd.ath16.ap_bsSTOPPED EVENT for vap 0 (86590000) 
 +
 +: not found 
 +br0: port 3(ath16) entering disabled state 
 + DEVICE IS DOWN ifname=ath16 
 +ath16: Could not DEVICE IS DOWN ifname=ath16 
 + connect to kernel driver 
 +Using interface ath16 with hwaddr 54:b8:0a:35:08:98 and ssid 'CyberNetX' 
 +OL vap_stop + 
 +wmi_unified_vdev_stop_send for vap 0 (86590000) 
 +OL vap_stop - 
 +STOPPED EVENT for vap 0 (86590000) 
 +OL vap_start + 
 +wmi_unified_vdev_start_send for vap 0 (86590000) 
 +OL vap_start - 
 +ol_vdev_start_resp_ev for vap 0 (86590000) 
 +ol_ath_vap_join: join operation is only for STA/IBSS mode 
 +ol_ath_wmm_update: 
 +ol_if_dfs_configure: called 
 +ol_if_dfs_configure: ETSI domain 
 +ol_if_dfs_disable: called 
 +ol_if_dfs_enable: called 
 +cac_start chan 5580 timeout 612 sec, curr time: 4294716 sec 
 +Notification to UMAC VAP layer 
 +ALPHA:[Wireless] 5G:Initiate Wireless success 
 +ALPHA:[SNMP-TRAP][Specific=7] 
 +br0: port 3(ath16) entering forwarding state 
 +FWLOG: [62518] WAL_DBGID_SECURITY_ENCR_EN (  ) 
 +FWLOG: [62518] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) 
 +[/var/run/trafficmgr_stop.sh] ... 
 +[/var/run/qos_stop.sh] ... 
 +FWLOG: [63322] WAL_DBGID_BB_WDOG_TRIGGERED ( 0xf75a, 0x200008a, 0x0, 0x15 ) 
 +[/var/run/tc_monitor_start.sh] ... 
 +tc monitor is disable 
 +[/var/run/qos_start.sh] ... 
 +Start QOS system ... 
 +QOS is disabled. 
 +[/var/run/trafficmgr_start.sh] ... 
 +Start traffic manager system ... 
 +traffic manager is disabled. 
 +[/usr/sbin/submit] NETFILTER ... 
 +#!/bin/sh 
 +netfilter.sh... 
 +netfilter_flag:
 +[/usr/sbin/submit] ARP_SPOOFING ... 
 +[/etc/templates/arpspoofing.sh] restart ... 
 +[/var/run/arpspoofing_stop.sh] ... 
 +sleep 5..... 
 +Stop arp spoofing prevention... 
 +[/var/run/arpspoofing_start.sh] ... 
 +Start arp spoofing prevention ... 
 +arp spoofing prevention is disabled. 
 +---Checking System Memory..OK, Current Free Memoey is 80428 KB 
 +Radar found on channel 116 (5580 MHz) 
 +ol_if_dfs_clist_update: called, cmd=1, nollist=8657f220, nentries=4 
 +set channel freq 5560 
 +DCS previous state is restored 
 +ALPHA:[SNMP-TRAP][Specific=16] 
 +ALPHA:[Wireless]5GHz Wireless Channel Changed to 112 channel by DFS 
 +ol_vdev_start_resp_ev for vap 0 (86590000) 
 +ol_if_dfs_configure: called 
 +ol_if_dfs_configure: ETSI domain 
 +ol_if_dfs_disable: called 
 +ol_if_dfs_enable: called 
 +cac_start chan 5560 timeout 65 sec, curr time: 4294803 sec 
 +Notification to UMAC VAP layer 
 +cac_timeout cac expired, chan 5560 curr time 4294868 
 +wmi_unified_vdev_up_send for vap 0 (86590000) 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki> 
 +U-Boot 1.1.4 (Jan 26 2014 - 16:16:52) 
 + 
 +ap135 - Scorpion 1.0 
 +ALPHA U-boot v1.00rc002 
 +DRAM: 
 +sri 
 +Scorpion 1.0 
 +ath_ddr_initial_config(178): (32bit) ddr2 init 
 +tap = 0x00000003 
 +Tap (low, high) = (0x2, 0x1c) 
 +Tap values = (0xf, 0xf, 0xf, 0xf) 
 +128 MB 
 +Top of RAM usable for U-Boot at: 88000000 
 +Reserving 243k for U-Boot at: 87fc0000 
 +Reserving 192k for malloc() at: 87f90000 
 +Reserving 44 Bytes for Board Info at: 87f8ffd4 
 +Reserving 36 Bytes for Global Data at: 87f8ffb0 
 +Reserving 128k for boot params() at: 87f6ffb0 
 +Stack Pointer at: 87f6ff98 
 +Now running in RAM - U-Boot at: 87fc0000 
 +Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18 
 +flash size 16MB, sector count = 256 
 +Flash: 16 MB 
 +*** Warning - bad CRC, using default environment 
 + 
 +*** Warning *** : PCIe WLAN Module not found !!! 
 +In:    serial 
 +Out:   serial 
 +Err:   serial 
 +Net:   ath_gmac_enet_initialize... 
 +athrs_sgmii_res_cal: cal value = 0xe 
 +ath_gmac_enet_initialize: reset mask:c02200 
 +Scorpion ---->f1e PHY* 
 +: cfg1 0x80000000 cfg2 0x7114 
 +eth0: 00:03:7f:09:0b:ad 
 +ATHR_AUTONEG_ADVERT:DE1 
 +ATHR_1000BASET_CONTROL:200 
 +ATHR_PHY_CONTROL:1000 
 +ATHRSF1_PHY: Port 4, Neg Success 
 +ATHRSF1_PHY: unit 0 phy addr 4 eth0 up 
 +eth0 
 +Setting 0x18116290 to 0x60c0214f 
 +press 'q' to stop autoboot: 
 +## Booting image at 9f070000 ... 
 +   Image Name:   7zip Linux Kernel 
 +   Created:      1970-01-01   0:00:00 UTC 
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
 +   Data Size:    -1 Bytes = 4096 MB 
 +   Load Address: 80002000 
 +   Entry Point:  80002000 
 +   Uncompressing Kernel Image with LZMA ... 
 + 
 + Check Image ... 
 + 
 +Image OK! 
 +OK 
 +No initrd 
 +## Transferring control to Linux (at address 80002000) ... 
 +## Giving linux memsize in bytes, 134217728 
 + 
 +Starting kernel ... 
 + 
 +[    0.000000] Linux version 4.19.123 (sebastian@sebastian-msi) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13213+1-146e18af56)) #0 Fri Jun 19 13:50:29 2020 
 +[    0.000000] bootconsole [early0] enabled 
 +[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc) 
 +[    0.000000] MIPS: machine is D-Link DAP-2660 A1 
 +[    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000]  memory: 08000000 @ 00000000 (usable) 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] random: get_random_bytes called from start_kernel+0x98/0x4a8 with crng_init=0 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480 
 +[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 
 +[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] Memory: 122360K/131072K available (4328K kernel code, 176K rwdata, 1032K rodata, 1240K init, 206K bss, 8712K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS: 51 
 +[    0.000000] CPU clock: 720.000 MHz 
 +[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns 
 +[    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns 
 +[    0.008291] Calibrating delay loop... 359.42 BogoMIPS (lpj=718848) 
 +[    0.042885] pid_max: default: 32768 minimum: 301 
 +[    0.047994] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.055047] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.066759] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 
 +[    0.077161] futex hash table entries: 256 (order: -1, 3072 bytes) 
 +[    0.083774] pinctrl core: initialized pinctrl subsystem 
 +[    0.090154] NET: Registered protocol family 16 
 +[    0.122279] clocksource: Switched to clocksource MIPS 
 +[    0.128748] NET: Registered protocol family 2 
 +[    0.134115] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) 
 +[    0.142361] TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.149796] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.156572] TCP: Hash tables configured (established 1024 bind 1024) 
 +[    0.163450] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.169710] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.176731] NET: Registered protocol family 1 
 +[    0.184277] Crashlog allocated RAM at address 0x3f00000 
 +[    0.191149] workingset: timestamp_bits=14 max_order=15 bucket_order=1 
 +[    0.203933] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.210172] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.232092] io scheduler noop registered 
 +[    0.236305] io scheduler deadline registered (default) 
 +[    0.243649] pinctrl-single 1804002c.pinmux: 544 pins, size 68 
 +[    0.250761] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +[    0.258153] console [ttyS0] disabled 
 +[    0.262018] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A 
 +[    0.271211] console [ttyS0] enabled 
 +[    0.271211] console [ttyS0] enabled 
 +[    0.278631] bootconsole [early0] disabled 
 +[    0.278631] bootconsole [early0] disabled 
 +[    0.303739] m25p80 spi0.0: w25q128 (16384 Kbytes) 
 +[    0.308590] 9 fixed-partitions partitions found on MTD device spi0.0 
 +[    0.315047] Creating 9 MTD partitions on "spi0.0": 
 +[    0.319929] 0x000000000000-0x000000040000 : "bootloader" 
 +[    0.326059] 0x000000040000-0x000000050000 : "bdcfg" 
 +[    0.331741] 0x000000050000-0x000000060000 : "rgdb" 
 +[    0.337315] 0x000000060000-0x000000070000 : "unknown" 
 +[    0.343160] 0x000000070000-0x000000f50000 : "firmware" 
 +[    0.353130] 2 wrgg-fw partitions found on MTD device firmware 
 +[    0.359011] Creating 2 MTD partitions on "firmware": 
 +[    0.364066] 0x000000000000-0x000000600000 : "kernel" 
 +[    0.369789] 0x000000600000-0x000000ee0000 : "rootfs" 
 +[    0.375507] mtd: device 6 (rootfs) set to be root filesystem 
 +[    0.382629] 1 squashfs-split partitions found on MTD device rootfs 
 +[    0.388953] 0x0000008d0000-0x000000ee0000 : "rootfs_data" 
 +[    0.395149] 0x000000f50000-0x000000f70000 : "langpack" 
 +[    0.401098] 0x000000f70000-0x000000fe0000 : "captival" 
 +[    0.407040] 0x000000fe0000-0x000000ff0000 : "certificate" 
 +[    0.413238] 0x000000ff0000-0x000001000000 : "art" 
 +[    0.420385] libphy: Fixed MDIO Bus: probed 
 +[    0.427337] ag71xx 19000000.eth: invalid MAC address, using random address 
 +[    0.752083] libphy: ag71xx_mdio: probed 
 +[    0.756141] mdio_bus mdio.0: MDIO device at address 0 is missing. 
 +[    0.762407] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe. 
 +[    0.770266] i2c /dev entries driver 
 +[    0.775594] NET: Registered protocol family 10 
 +[    0.784062] Segment Routing with IPv6 
 +[    0.787940] NET: Registered protocol family 17 
 +[    0.792546] 8021q: 802.1Q VLAN Support v1.8 
 +[    0.797642] PCI host bridge /ahb/pcie-controller@180c0000 ranges: 
 +[    0.803888]  MEM 0x0000000010000000..0x0000000011ffffff 
 +[    0.809203]   IO 0x0000000000000000..0x0000000000000000 
 +[    0.814671] PCI host bridge to bus 0000:00 
 +[    0.818864] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff] 
 +[    0.825846] pci_bus 0000:00: root bus resource [io  0x0000] 
 +[    0.831512] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] 
 +[    0.838412] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
 +[    0.847711] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit] 
 +[    0.855188] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref] 
 +[    0.862755] PCI host bridge /ahb/pcie-controller@18250000 ranges: 
 +[    0.868989]  MEM 0x0000000012000000..0x0000000013ffffff 
 +[    0.874307]   IO 0x0000000000000001..0x0000000000000001 
 +[    0.879621] ar724x-pci 18250000.pcie-controller: PCIe link is down 
 +[    0.886047] PCI host bridge to bus 0000:01 
 +[    0.890241] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff] 
 +[    0.897224] pci_bus 0000:01: root bus resource [io  0x0001] 
 +[    0.902889] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0] 
 +[    0.909789] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] 
 +[    0.919008] ag71xx 19000000.eth: invalid MAC address, using random address 
 +[    1.174276] random: fast init done 
 +[    1.239364] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe. 
 +[    1.247431] ag71xx 19000000.eth: invalid MAC address, using random address 
 +[    1.571357] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe. 
 +[    1.583365] VFS: Mounted root (squashfs filesystem) readonly on device 31:6. 
 +[    1.594991] Freeing unused kernel memory: 1240K 
 +[    1.599610] This architecture does not have kernel memory protection. 
 +[    1.606152] Run /sbin/init as init process 
 +[    2.163811] init: Console is alive 
 +[    2.167506] init: - watchdog - 
 +[    2.875724] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    2.936337] ag71xx 19000000.eth: invalid MAC address, using random address 
 +[    2.944016] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[    2.961755] init: - preinit - 
 +[    3.332691] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe. 
 +[    3.794988] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    3.903063] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    3.946013] random: jshn: uninitialized urandom read (4 bytes read) 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
 +[    7.265209] mount_root: jffs2 not ready yet, using temporary tmpfs overlay 
 +[    7.291635] urandom-seed: Seed file not found (/etc/urandom.seed) 
 +[    7.387692] procd: - early - 
 +[    7.390753] procd: - watchdog - 
 +[    8.013029] procd: - watchdog - 
 +[    8.016497] procd: - ubus - 
 +[    8.145557] urandom_read: 5 callbacks suppressed 
 +[    8.145564] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[    8.241585] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[    8.249406] procd: - init - 
 +Please press Enter to activate this console. 
 +[    8.832462] kmodloader: loading kernel modules from /etc/modules.d/
 +[    8.989356] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056 
 +[    8.997085] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb 
 +[    9.063121] xt_time: kernel timezone is -0000 
 +[    9.196836] PPP generic driver version 2.4.2 
 +[    9.211259] NET: Registered protocol family 24 
 +[    9.264519] urngd: v1.0.2 started. 
 +[    9.327331] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=13 
 +[    9.334693] ag71xx 19000000.eth: invalid MAC address, using random address 
 +[    9.430618] kmodloader: done loading kernel modules from /etc/modules.d/
 +[    9.590657] random: crng init done 
 +[    9.706523] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe. 
 +[   36.759035] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 
 +[   36.782340] jffs2_build_filesystem(): unlocking the mtd device... 
 +[   36.782384] done. 
 +[   36.790624] jffs2_build_filesystem(): erasing all blocks after the end marker... 
 +[   37.579550] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready 
 +[   39.920780] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 
 +[   40.052176] br-lan: port 1(wlan0) entered blocking state 
 +[   40.057614] br-lan: port 1(wlan0) entered disabled state 
 +[   40.063367] device wlan0 entered promiscuous mode 
 +[   41.284738] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 
 +[   41.291396] br-lan: port 1(wlan0) entered blocking state 
 +[   41.296835] br-lan: port 1(wlan0) entered forwarding state 
 +[   41.347744] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[   57.360470] done. 
 +[   57.362491] jffs2: notice: (1410) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. 
 +[   57.525405] overlayfs: upper fs does not support tmpfile. 
 + 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2022/03/08 16:29
  • by madmartin