Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:d-link:d-link_dap-2230_a1 [2021/01/11 21:29] – Created from the form at meta:create_new_device_page s_2toh:d-link:d-link_dap-2230_a1 [2021/01/20 20:11] – [Flash Layout] s_2
Line 1: Line 1:
 ====== D-Link DAP-2230 A1====== ====== D-Link DAP-2230 A1======
  
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY.  */ 
-/* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ 
-/* USE https://openwrt.org/meta/create_new_device_page */ 
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}+The DAP-2230 is an N300 Wall-Mount PoE Access Point from the [[toh:d-link:d-link_dap_series_of_business_access_points|D-Link DAP Series of Business Access Points]], manufactured by Alpha Networks.
  
-//Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.// 
  
-<WRAP BOX> 
-FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) **remove the instructions, as well as the ''<nowiki><WRAP></nowiki>'' that encloses it.** 
-</WRAP> 
  
-/*****/ 
-/* How to add images ========> http://openwrt.org/meta/adding_images_to_openwrt_wiki */ 
-/*****/ 
- 
-{{media:example:genericrouter1.png?200|Generic Router}} 
- 
-<WRAP BOX> 
-FIXME 
-===== Getting started with a new Device Page ===== 
-  - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.** 
-  - There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness. 
-  - When there are no more "fixme" tags left, delete this one too, along with the ''<nowiki><WRAP></nowiki>'' that encloses it. 
- 
-===== Keep the articles modular ===== 
-  * Please include only model specific information, omit bla,bla and put everything generic into separate articles 
-  * If you have no time to write certain stuff, link to [[docs:start]] 
-  * [[docs:guide-user:base-system:start]] should lead the way, do not explain this again 
-  * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]]. 
-</WRAP> 
  
 ===== Supported Versions ===== ===== Supported Versions =====
  
-<WRAP BOX> 
-FIXME 
-  - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If the tables below show information for ''<nowiki>D-Link DAP-2230 A1</nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables below contain "Nothing found", it means that either 
-    - the dataentry page for D-Link DAP-2230 A1 is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-    - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter  : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
  
 ---- datatable ---- ---- datatable ----
Line 54: Line 19:
 ---- ----
  
----- datatable ---- 
-cols    : Unsupported Functions_unsupporteds 
-filter  : Brand=D-Link 
-filter  : Model=DAP-2230 
-filter  : Versions~A1 
----- 
- 
-===== Experimental Versions ===== 
- 
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  
-   The official Table of Hardware only lists current, stable versions of OpenWrt.  * 
-   Use this space to describe any on-going efforts to create a newer version       * 
-   of the firmware for this device. Provide links to firmware images,              * 
-   active threads on the forum, or other sources of information.                   * 
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ 
- 
-//None at this time.// 
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
Line 109: Line 57:
  
  
--> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] +-> Please see the main article for the DAP-2xxx series for [[:toh:d-link:D-Link DAP Series of Business Access Points#flashing]] instructions.
- +
-FIXME Please add the installation procedure here.+
  
 ==== Flash Layout ==== ==== Flash Layout ====
-<WRAP BOX> +^ start ^ size ^ label ^ 
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).//+0x00000000 | 0x00040000 (256k) bootloader | 
 +| 0x00040000 | 0x00010000 (64k| bdcfg | 
 +| 0x00050000 | 0x00010000 (64k) | rgdb | 
 +| 0x00060000 | 0x00010000 (64k) | unknown | 
 +| 0x00070000 | 0x00ee0000 (15232k) | firmware | 
 +| 0x00f50000 | 0x00020000 (128k) | langpack | 
 +| 0x00f70000 | 0x00070000 (448k) | captival | 
 +| 0x00fe0000 | 0x00010000 (64k) | certificate | 
 +| 0x00ff0000 | 0x00010000 (64k) | art |
  
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. 
-</WRAP> 
- 
-==== OEM easy installation ==== 
- 
-<WRAP BOX> 
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ 
-**//Remove / modify them if they do not apply to this particular device!//** 
- 
-This section deals with 
-  * How you install OpenWrt from a device freshly opened 
-  * The steps required such as reset to factory defaults if the device has already been configured 
- 
-**Note:** Reset router to factory defaults if it has been previously configured. 
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' 
-  * Upload .bin file to router 
-  * Wait for it to reboot 
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. 
-</WRAP> 
- 
-==== OEM installation using the TFTP method ==== 
- 
-->  [[docs:guide-user:installation:generic.flashing.tftp]] 
- 
-=== Specific values needed for tftp === 
- 
-<WRAP BOX> 
- 
-FIXME Enter values for "FILL-IN" below 
- 
-^ Bootloader tftp server IPv4 address  | FILL-IN   | 
-^ Bootloader MAC address (special)     | FILL-IN   | 
-^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | 
-^ TFTP transfer window                 | FILL-IN seconds                                | 
-^ TFTP window start                    | approximately FILL-IN seconds after power on   | 
-^ TFTP client required IP address      | FILL-IN                                        | 
- 
-</WRAP> 
  
 ===== Upgrading OpenWrt ===== ===== Upgrading OpenWrt =====
 ->  [[docs:guide-user:installation:generic.sysupgrade]] ->  [[docs:guide-user:installation:generic.sysupgrade]]
- 
-<WRAP BOX> 
- 
-FIXME These are generic instructions. Update with your router's specifics. 
- 
-==== LuCI Web Upgrade Process ==== 
- 
-  * Browse to ''<nowiki>http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/</nowiki>'' LuCI Upgrade URL 
-  * Upload image file for sysupgrade to LuCI 
-  * Wait for reboot 
- 
-==== Terminal Upgrade Process ==== 
- 
-If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. 
-There are two command line methods for upgrading: 
- 
-  * ''sysupgrade'' 
-  * ''mtd'' 
- 
-Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. 
- 
-=== sysupgrade === 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-sysupgrade /tmp/xxx.abc 
-</code> 
- 
-=== mtd === 
- 
-If ''sysupgrade'' does not support this router, use ''mtd''. 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-mtd write /tmp/xxx.abc linux && reboot 
-</code> 
- 
-</WRAP> 
- 
 ===== Debricking ===== ===== Debricking =====
--> [[docs:guide-user:troubleshooting:generic.debrick]]+-> -> Please see the main article for the DAP-2xxx series for [[:toh:d-link:D-Link DAP Series of Business Access Points#unbricking]] instructions.
  
 ===== Failsafe mode ===== ===== Failsafe mode =====
Line 213: Line 84:
 Set up your Internet connection, configure wireless, configure USB port, etc. Set up your Internet connection, configure wireless, configure USB port, etc.
  
-===== Specific Configuration ===== 
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
- 
-==== Network interfaces ==== 
-The default network configuration is: 
-^ Interface Name   ^ Description                  ^ Default configuration    ^ 
-| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   | 
-| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | 
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | 
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | 
- 
-</WRAP> 
- 
-==== Switch Ports (for VLANs) ==== 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
- 
-Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. 
-^ Port             ^ Switch port   ^ 
-| Internet (WAN)   | EXAMPLE 4     | 
-| LAN 1            | EXAMPLE 3     | 
-| LAN 2            | EXAMPLE 2     | 
-| LAN 3            | EXAMPLE 1     | 
-| LAN 4            | EXAMPLE 0     | 
- 
-</WRAP> 
  
 ==== Buttons ==== ==== Buttons ====
 -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s).
 Here, we merely name the buttons, so we can use them in the above Howto. Here, we merely name the buttons, so we can use them in the above Howto.
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
  
 The D-Link DAP-2230 has the following buttons: The D-Link DAP-2230 has the following buttons:
  
-^ BUTTON                       Event   ^ +^ BUTTON                       GPIO   ^ 
-EXAMPLE Reset                |  reset  | +| Reset                |  17  |
-| EXAMPLE Secure Easy Setup    |   ses   | +
-| EXAMPLE No buttons at all.      -    | +
- +
-</WRAP> +
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-<WRAP BOX> 
-FIXME 
-  - This table is automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If you see "Nothing." instead of a table, please **edit this section and adjust the filters with the proper Brand and Model.** Just try, it's easy. 
-  - If you still don't see a table here, or a table filled with '¿': [[toh:start|Is there already a Techdata page available]] for D-Link DAP-2230 A1? If not: [[meta:create_new_dataentry_page|Create one]]. 
-  - If you see a table with the desired device data, everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If it still doesn't work: Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
  
 ---- datatemplatelist dttpllist ---- ---- datatemplatelist dttpllist ----
Line 297: Line 124:
  
 <WRAP BOX> <WRAP BOX>
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...// +Remove 4 screws (PH2)pull case apart.
-  * To remove the cover and open the device, do a/b/c+
 </WRAP> </WRAP>
  
Line 305: Line 131:
  
 ==== Serial ==== ==== Serial ====
--> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. +-> Please see the main article for the DAP-2xxx series for [[:toh:d-link:D-Link DAP Series of Business Access Points#serial_console]].
- +
-How to connect to the Serial Port of this specific device:\\ +
-**Insert photo of PCB with markings for serial port** +
- +
-<WRAP BOX> +
-FIXME //Replace EXAMPLE by real values.// +
-</WRAP> +
- +
-^ Serial connection parameters\\ for D-Link DAP-2230 A1 | EXAMPLE 115200, 8N1 | +
 ==== JTAG ==== ==== JTAG ====
 -> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc. -> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
Line 333: Line 149:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki>U-Boot 1.1.4 (Aug 27 2015 - 14:06:48) 
 + 
 +ap143 - Honey Bee 2.0 
 +ALPHA U-boot v1.00rc002 
 +DRAM: 
 +sri 
 +Honey Bee 2.0 
 +ath_ddr_initial_config(195): (16bit) ddr2 init 
 +tap = 0x00000003 
 +Tap (low, high) = (0x4, 0x31) 
 +Tap values = (0x1a, 0x1a, 0x1a, 0x1a) 
 +64 MB 
 +Top of RAM usable for U-Boot at: 84000000 
 +Reserving 244k for U-Boot at: 83fc0000 
 +Reserving 192k for malloc() at: 83f90000 
 +Reserving 44 Bytes for Board Info at: 83f8ffd4 
 +Reserving 36 Bytes for Global Data at: 83f8ffb0 
 +Reserving 128k for boot params() at: 83f6ffb0 
 +Stack Pointer at: 83f6ff98 
 +Now running in RAM - U-Boot at: 83fc0000 
 +Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18 
 +flash size 16MB, sector count = 256 
 +Flash: 16 MB 
 +*** Warning - bad CRC, using default environment 
 + 
 +*** Warning *** : PCIe WLAN Module not found !!! 
 +In:    serial 
 +Out:   serial 
 +Err:   serial 
 +Net:   ath_gmac_enet_initialize... 
 +ath_gmac_enet_initialize: reset mask:c02200 
 +Scorpion ---->S27 PHY* 
 +S27 reg init 
 +: cfg1 0x800c0000 cfg2 0x7114 
 +eth0: 00:03:7f:09:0b:ad 
 +athrs27_phy_setup ATHR_PHY_CONTROL 4 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :10 
 +eth0 up 
 +Honey Bee ---->  MAC 1 S27 PHY * 
 +S27 reg init 
 +ATHRS27: resetting s27 
 +ATHRS27: s27 reset done 
 +: cfg1 0x800c0000 cfg2 0x7214 
 +eth1: 00:03:7f:09:0b:ad 
 +athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :10 
 +athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10 
 +athrs27_phy_setup ATHR_PHY_CONTROL 2 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10 
 +athrs27_phy_setup ATHR_PHY_CONTROL 3 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :10 
 +eth1 up 
 +eth0, eth1 
 +Setting 0x181162c0 to 0x50a1a100 
 +press 'q' to stop autoboot: 
 +## Booting image at 9f070000 ... 
 +   Image Name:   7zip Linux Kernel 
 +   Created:      1970-01-01   0:00:00 UTC 
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
 +   Data Size:    -1 Bytes = 4096 MB 
 +   Load Address: 80002000 
 +   Entry Point:  80002000 
 +   Uncompressing Kernel Image with LZMA ... 
 + 
 + Check Image ... 
 + 
 +Image OK! 
 +OK 
 +No initrd 
 +## Transferring control to Linux (at address 80002000) ... 
 +## Giving linux memsize in bytes, 67108864 
 + 
 +Starting kernel ... 
 + 
 +Booting QCA953x 
 +Linux version 2.6.31--LSDK-10.2.85 (release@cdWSCMPL06) (gcc version 4.3.3 (GCC) ) #1 Wed Jul 13 13:34:35 CST 2016 
 +flash_size passed from bootloader = 16 
 +CPU revision is: 00019374 (MIPS 24Kc) 
 +ath_sys_frequency: cpu apb ddr apb cpu 650 ddr 392 ahb 216 
 +Determined physical RAM map: 
 + memory: 02000000 @ 00000000 (usable) 
 +User-defined physical RAM map: 
 + memory: 04000000 @ 00000000 (usable) 
 +Initrd not found or empty - disabling initrd 
 +Zone PFN ranges: 
 +  Normal   0x00000000 -> 0x00004000 
 +Movable zone start PFN for each node 
 +early_node_map[1] active PFN ranges 
 +    0: 0x00000000 -> 0x00004000 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256 
 +Kernel command line: console=ttyS0,115200 root=/dev/mtdblock0 rw mem=64m 
 +PID hash table entries: 256 (order: 8, 1024 bytes) 
 +Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +Writing ErrCtl register=00000000 
 +Readback ErrCtl register=00000000 
 +Memory: 47632k/65536k available (2179k kernel code, 17828k reserved, 477k data, 144k init, 0k highmem) 
 +NR_IRQS:128 
 +plat_time_init: plat time init done 
 +Calibrating delay loop... 433.15 BogoMIPS (lpj=866304) 
 +Mount-cache hash table entries: 512 
 + 
 +****************ALLOC*********************** 
 + Packet mem: 802d06c0 (0xe00000 bytes) 
 +******************************************** 
 + 
 +NET: Registered protocol family 16 
 +ath_pcibios_init: bus 0 
 +***** Warning PCIe 0 H/W not found !!! 
 +registering PCI controller with io_map_base unset 
 +bio: create slab <bio-0> at 0 
 +NET: Registered protocol family 2 
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP established hash table entries: 2048 (order: 2, 16384 bytes) 
 +TCP bind hash table entries: 2048 (order: 1, 8192 bytes) 
 +TCP: Hash tables configured (established 2048 bind 2048) 
 +TCP reno registered 
 +NET: Registered protocol family 1 
 +ATH GPIOC major 0 
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +msgmni has been set to 93 
 +io scheduler noop registered 
 +io scheduler deadline registered (default) 
 +Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A 
 +console [ttyS0] enabled 
 +brd: module loaded 
 +ELBOX CFI physmap flash device: 1000000 at 9f000000 
 + ATH serial flash !! 
 +ath-nor0: squashfs filesystem found at offset 0x00160000 
 +Creating 11 MTD partitions on "ath-nor0": 
 +0x0000001600c0-0x0000009870c0 : "rootfs" 
 +0x000000070000-0x000000f50000 : "upgrade" 
 +0x000000050000-0x000000060000 : "rgdb" 
 +0x000000040000-0x000000050000 : "bdcfg" 
 +0x000000f50000-0x000000f70000 : "langpack" 
 +0x000000fe0000-0x000000ff0000 : "certificate" 
 +0x000000ff0000-0x000001000000 : "radiocfg" 
 +0x000000000000-0x000001000000 : "flash" 
 +0x000000000000-0x000000040000 : "bootloader" 
 +0x000000040000-0x000000050000 : "boot config" 
 +0x000000f70000-0x000000fe0000 : "captival" 
 +u32 classifier 
 +    Actions configured 
 +arp_tables: (C) 2002 David S. Miller 
 +TCP cubic registered 
 +NET: Registered protocol family 10 
 +IPv6 over IPv4 tunneling driver 
 +NET: Registered protocol family 17 
 +Bridge firewalling registered 
 +Ebtables v2.0 registered 
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> 
 +All bugs added by David S. Miller <davem@redhat.com> 
 +athwdt_init: Registering WDT success 
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:0. 
 +Freeing unused kernel memory: 144k freed 
 +init started: BusyBox v1.14.1 (2016-07-13 13:34:37 CST) 
 +starting pid 131, tty '': '/etc/init.d/rcS' 
 +[/etc/init.d/S03config.sh] 
 +Mounting proc and var ... 
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/10 
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +SymbLink /dev/mtdblock/
 +Inserting modules ... 
 +Inserting Rebootm ... 
 +Rebootm loading ... 
 +Inserting atheros ethernet ... 
 +qca955x_GMAC: Length per segment 1536 
 +953x_GMAC: qca953x_gmac_attach 
 +Link Int Enabled 
 +qca953x_set_gmac_caps  CHECK DMA STATUS 
 +953x_GMAC: qca953x_gmac_attach 
 +Link Int Enabled 
 +qca953x_set_gmac_caps  CHECK DMA STATUS 
 +mac:1 Registering S27.... 
 +qca955x_GMAC: RX TASKLET - Pkts per Intr:18 
 +qca955x_GMAC: Mac address for unit 1:bfff0006 
 +qca955x_GMAC: ff:ff:ff:ff:ff:ff 
 +qca955x_GMAC: Max segments per packet :   1 
 +qca955x_GMAC: Max tx descriptor count :   128 
 +qca955x_GMAC: Max rx descriptor count :   128 
 +qca955x_GMAC: Mac capability flags    :   2D89 
 +Inserting gpio ... 
 +GPIO driver initialized. 
 +done. 
 +Start xmldb ... 
 +[/etc/scripts/misc/profile.sh] getnew ... 
 +[/etc/scripts/misc/defnodes.sh] ... 
 +[/etc/defnodes/S10setext.sh] ... 
 +PHP [/etc/defnodes/S11setnodes.php] ... 
 +PHP [/etc/defnodes/S12features.php] ... 
 +PHP [/etc/defnodes/S13flashspeed.php] ... 
 +PHP [/etc/defnodes/S20setnodes.php] ... 
 +mount: mounting /dev/mtdblock/4 on /www/locale/alt failed: Invalid argument 
 +PHP [/etc/defnodes/S40brand.php] ... 
 +[/etc/scripts/misc/defnodes.sh] Done !! 
 +[/etc/templates/timezone.sh] ... 
 +[/etc/templates/logs.sh] ... 
 +[/var/run/logs_run.sh] ... 
 +gpio set led status 
 +[/etc/templates/powerled.sh] ... 
 +[/var/run/powerled_run.sh] ... 
 +athr_gmac_ring_alloc Allocated 2048 at 0x83a1d800 
 +athr_gmac_ring_alloc Allocated 2048 at 0x83a1d000 
 +HONEYBEE ----> S27 PHY MDIO 
 +ATHRS27: resetting s27 
 +ATHRS27: s27 reset done 
 +Setting Drop CRC Errors, Pause Frames and Length Error frames 
 +Setting PHY... 
 +ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +[/etc/init.d/S03config.sh] done! 
 +[/etc/init.d/S10system.sh] 
 +Write some proc file ... 
 +Enable panic timeout when Kernel panic ... 
 +start Layout ... 
 +[/etc/scripts/layout.sh] start ... 
 +[/var/run/layout_start.sh] ... 
 +Start bridge layout ... 
 +device eth0 entered promiscuous mode 
 +start LAN ... 
 +[/etc/templates/lan.sh] ... 
 +[/var/run/lan_start.sh] ... 
 +Bridge mode selected, LAN is disabled ! 
 +start web server ... 
 +[/etc/templates/webs.sh] start ... 
 +[/var/run/webs_start.sh] ... 
 +Starting HTTPD ... 
 +nvram: not found 
 +nvram: not found 
 +start eth0 vlan setup ... 
 +[/etc/scripts/eth_vlan.sh] start ... 
 +[/var/run/eth0_vlan_start.sh] ... 
 + disable VLAN 
 +#!/bin/sh 
 +limitedadmin.sh... 
 +[/etc/scripts/eth_vlan.sh] start ... 
 +[/var/run/eth0_vlan_stop.sh] ... 
 +[/var/run/eth0_vlan_start.sh] ... 
 + disable VLAN 
 +#!/bin/sh 
 +pingctl.sh... 
 +start fresetd ... 
 +rxcheck: not found 
 +enable LAN ports ... 
 +Factory reset time : 5 secs 
 +System reset time  : 1 secs 
 +WPS command : [/etc/templates/wps.sh pbc &] 
 +[/etc/scripts/enlan.sh] ... 
 + Generate channel table according to the country code... 
 +generate country domain mapping table 
 + Generate VLAN table according to the port... 
 +start WAN ... 
 +Set WAN port media type 0 
 +slinktype: not found 
 +[/etc/templates/wan.sh] start ... 
 +[/var/run/eth0_vlan_start.sh] ... 
 + disable VLAN 
 +[/var/run/wan_start.sh] ... 
 +Bridge mode selected ! 
 +Start WAN(br0),192.168.0.50/255.255.255.0 ... 
 +[/etc/templates/wanup.sh] ... 
 +[/var/run/wan_up.sh] ... 
 +[/etc/templates/ntp.sh] ... 
 +killall: ntpclient: no process killed 
 +NTP client is disabled ... 
 +[/etc/templates/upnpd.sh] ... 
 +[/var/run/upnpd_start.sh] ... 
 +UPNP function is not enabled !! 
 +/etc/templates/webredirect.sh: not found 
 +[/usr/sbin/submit] CAPTIVAL_PORTAL ... 
 +[/var/run/captival_portal_stop.sh] ... 
 +captival portal already stop 
 +[/var/run/captival_portal_start.sh] ... 
 +captival_state 0 
 +captival portal is disable 
 +>>>/var/run/wan_start.sh: Start IPv6 configuration >>> 
 +Disable IPv6. 
 +<<< End of IPv6 <<< 
 +captival_tar prep ... 
 +remains :457216bytes 
 +nvram: not found 
 +nvram: not found 
 +start stunnel ... 
 +[/etc/templates/stunnel.sh] ... 
 +Setting certificate. 
 +[/var/run/stunnel_start.sh] ... 
 +Starting universal SSL tunnel: stunnel. 
 +Enable wlan restart  ... 
 +wlanRestart: not found 
 +start WLAN ... 
 +[/etc/templates/wlan.sh] ... 
 +SERVD: stop service [WLAN] 
 +SERVD: service [WLAN] is already stopped. 
 +SERVD: start service [WLAN] 
 +start telnet daemon ... 
 +Start telnetd ... 
 +[/etc/templates/wlan_run.sh] start ... 
 +nvram: not found 
 +nvram: not found 
 +start SSHD daemon ... 
 +[/etc/templates/sshd.sh] ... 
 +[/etc/templates/autorekey.sh] ... 
 +[/var/run/autorekey_start_g.sh] ... 
 +[/var/run/autorekey_start_a.sh] ... 
 +[/var/run/sshd_start.sh] ... 
 +start sshd ... 
 +Disable start-up daemon: sshd. 
 +start DHCP server 
 +[/etc/templates/dhcpd.sh] ... 
 +start WLAN ..... 
 +[/var/run/dhcpd_restart.sh] ... 
 +Stop DHCP server (br0) ... 
 +Start DHCP server (br0) ... 
 +DHCP server is disabled! 
 +start SNMP ... 
 +[/etc/templates/snmp.sh] ... 
 +[/var/run/snmp_start.sh] ... 
 +Start SNMP daemon ... 
 +start cwmHelper ... 
 +start NEAP ... 
 +central wifi manager is not enable ,cwmHelper quit 
 +[/etc/templates/neaps.sh] start ... 
 +[/etc/templates/certs/certscmd.sh] ... 
 +[/var/run/neaps_start.sh] ... 
 +Start Neap Server ... 
 +start NEAPC ... 
 +DEVCONF: unable to read config data (ret=-3) ! 
 +Getting External certificate for hostapd & wpa_supplicant. Fail! 
 +[/var/run/wlan_insmod.sh] ... 
 +[/etc/templates/neapc.sh] start ... 
 +[/var/run/neapc_start.sh] ... 
 +Start NeapC Client ... 
 +adf: module license 'Proprietary' taints kernel. 
 +Disabling lock debugging due to kernel taint 
 +Stop apneaps Server ... 
 +: not found 
 +start APNEAPS_V2 ... 
 +[/etc/templates/apneaps_v2.sh] start ... 
 +Stop apneaps_v2 Server ... 
 +start AUTORFC ... 
 +[/etc/templates/autorf.sh] start ... 
 +Stop autorf client ... 
 +start LOADBALANCE ... 
 +[/etc/templates/loadbalance.sh] start ... 
 +[/var/run/loadbalance_start.sh] ... 
 +start Microsoft LLDP ... 
 +[/etc/templates/lld2d.sh] ... 
 +############## snmp beacon oid init ############## 
 +############## snmp init ############## 
 +[/var/run/lld2d_start.sh] ... 
 +Start LLD2 daemon ... 
 +start Ethlink ... 
 +start Trap Monitor ... 
 +[/etc/templates/arpspoofing.sh] start ... 
 +[/var/run/arpspoofing_start.sh] ... 
 +Start arp spoofing prevention ... 
 +arp spoofing prevention is disabled. 
 +#!/bin/sh 
 +netfilter.sh... 
 +netfilter_flag:
 +start DHCP multicast to unicast ... 
 +#!/bin/sh 
 +dhcp_mc2uc.sh... 
 +[/etc/init.d/S10system.sh] done! 
 +rcS done! 
 + 
 +Please press Enter to activate this console. ath_hal: 0.9.17.1 (AR5416, AR9380, DEBUG, REGOPS_FUNC, WRITE_EEPROM, TX_ATA_SWAP, RX_DATA_SWAP, 11D) 
 +ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved 
 +insmod: can't insert '/lib/modules/ath_dfs.ko': unknown symbol in module, or unknown parameter 
 +getaddrinfo:  Name or service not known 
 +Creating directory: /var/net-snmp 
 +NET-SNMP version 5.4.1 
 +ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved 
 +ath_ahb: 10.2-00082-4 (Atheros/multi-bss) 
 +__ath_attach: Set global_scn[0] 
 +*** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead *** 
 +ACBKMinfree = 48 
 +ACBEMinfree = 32 
 +ACVIMinfree = 16 
 +ACVOMinfree = 0 
 +CABMinfree = 48 
 +UAPSDMinfree = 0 
 +ATH_TXBUF=512 
 +Enterprise mode: 0x03fc0000 
 +Restoring Cal data from Flash 
 +Green-AP : Green-AP : Attached 
 + 
 +ath_get_caps[6164] rx chainmask mismatch actual 3 sc_chainmak 0 
 +ath_get_caps[6139] tx chainmask mismatch actual 3 sc_chainmak 0 
 +wifi0: Atheros ???: mem=0xb8100000, irq=2 
 +ath_pci: 10.2-00082-4 (Atheros/multi-bss) 
 +[/var/run/wlan_start.sh] ... 
 +wlan_vap_create : enter. devhandle=0x82840360, opmode=IEEE80211_M_HOSTAP, flags=0x1 
 +wlan_vap_create : exit. devhandle=0x82840360, opmode=IEEE80211_M_HOSTAP, flags=0x1. 
 +VAP device ath0 created 
 +ath0 
 +Start WLAN interface ath0 ... 
 +sc nodebug 0 
 +Interface doesn't accept private ioctl... 
 +ForBiasAuto (8BE0): Operation not permitted 
 +====essid: 
 + DES SSID SET=dlink 
 +dlink,len:5,pathSet freq vap stop send + 82af8000 
 +:/var/run/ath0.sSet freq vap stop send -82af8000 
 +sid==== 
 +Set wait done --82af8000 
 + ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 
 +Invalid command : preferred5g 
 +[/var/run/wlan_start.sh] ... 
 +sleep 2..... 
 +[/var/run/wlan_device_up.sh] ... 
 +UP 2.4G interface ! 
 +Set freq vap stop send + 82af8000 
 +Set freq vap stop send -82af8000 
 +Filter Accept CHLOAD Param Over RSSI ---Chan 11    cur 109 min 130 delta -21  allowed 10 
 + Best Channel Selected 11 rssi 130 nf -97 Set wait done --82af8000 
 +device ath0 entered promiscuous mode 
 +ALPHA:[Wireless]Initiate Wireless ath0 success 
 +ALPHA:[SNMP-TRAP][Specific=7] 
 +br0: port 2(ath0) entering forwarding state 
 +Filter Accept CHLOAD Param Over RSSI ---Chan 11    cur 105 min 124 delta -19  allowed 10 
 + Best Channel Selected 11 rssi 124 nf -97 
 +br0: port 2(ath0) multicast bandwidth all 
 +br0: port 1(eth0) multicast bandwidth all 
 +: not found 
 +[/etc/templates/lld2d.sh] ... 
 +[/var/run/lld2d_stop.sh] ... 
 +Stop LLD2 daemon ... 
 +[/var/run/lld2d_start.sh] ... 
 +Start LLD2 daemon ... 
 +[/var/run/vlan_stop.sh] ... 
 +[/var/run/vlan_start.sh] ... 
 +[/var/run/eth0_vlan_stop.sh] ... 
 +[/var/run/eth0_vlan_start.sh] ... 
 + disable VLAN 
 +[/usr/sbin/submit] CAPTIVAL_PORTAL ... 
 +[/var/run/captival_portal_stop.sh] ... 
 +captival portal already stop 
 +[/var/run/captival_portal_start.sh] ... 
 +captival_state 0 
 +captival portal is disable 
 +[/usr/sbin/submit] LOADBALANCE ... 
 +[/etc/templates/loadbalance.sh] restart ... 
 +[/var/run/loadbalance_stop.sh] ... 
 +[/usr/sbin/submit] QOS_TC_TM ... 
 +Stop loadbalance ... 
 +lo        no wireless extensions. 
 + 
 +sit0      no wireless extensions. 
 + 
 +eth0      no wireless extensions. 
 + 
 +br0       no wireless extensions. 
 + 
 +wifi0     no wireless extensions. 
 + 
 +[/var/run/tc_monitor_stop.sh] ... 
 +tc monitor already stop 
 +[/var/run/loadbalance_start.sh] ... 
 +[/var/run/trafficmgr_stop.sh] ... 
 +[/var/run/qos_stop.sh] ... 
 +[/var/run/tc_monitor_start.sh] ... 
 +tc monitor is disable 
 +[/var/run/qos_start.sh] ... 
 +Start QOS system ... 
 +QOS is disabled. 
 +[/var/run/trafficmgr_start.sh] ... 
 +Start traffic manager system ... 
 +traffic manager is disabled. 
 +[/usr/sbin/submit] NETFILTER ... 
 +#!/bin/sh 
 +netfilter.sh... 
 +netfilter_flag:
 +[/usr/sbin/submit] ARP_SPOOFING ... 
 +[/etc/templates/arpspoofing.sh] restart ... 
 +sleep 5..... 
 +[/var/run/arpspoofing_stop.sh] ... 
 +Stop arp spoofing prevention... 
 +[/var/run/arpspoofing_start.sh] ... 
 +Start arp spoofing prevention ... 
 +arp spoofing prevention is disabled. 
 +---Checking System Memory..OK, Current Free Memoey is 24128 KB 
 + 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki>U-Boot 1.1.4 (Aug 27 2015 - 14:06:48) 
 + 
 +ap143 - Honey Bee 2.0 
 +ALPHA U-boot v1.00rc002 
 +DRAM: 
 +sri 
 +Honey Bee 2.0 
 +ath_ddr_initial_config(195): (16bit) ddr2 init 
 +tap = 0x00000003 
 +Tap (low, high) = (0x4, 0x31) 
 +Tap values = (0x1a, 0x1a, 0x1a, 0x1a) 
 +64 MB 
 +Top of RAM usable for U-Boot at: 84000000 
 +Reserving 244k for U-Boot at: 83fc0000 
 +Reserving 192k for malloc() at: 83f90000 
 +Reserving 44 Bytes for Board Info at: 83f8ffd4 
 +Reserving 36 Bytes for Global Data at: 83f8ffb0 
 +Reserving 128k for boot params() at: 83f6ffb0 
 +Stack Pointer at: 83f6ff98 
 +Now running in RAM - U-Boot at: 83fc0000 
 +Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18 
 +flash size 16MB, sector count = 256 
 +Flash: 16 MB 
 +*** Warning - bad CRC, using default environment 
 + 
 +*** Warning *** : PCIe WLAN Module not found !!! 
 +In:    serial 
 +Out:   serial 
 +Err:   serial 
 +Net:   ath_gmac_enet_initialize... 
 +ath_gmac_enet_initialize: reset mask:c02200 
 +Scorpion ---->S27 PHY* 
 +S27 reg init 
 +: cfg1 0x800c0000 cfg2 0x7114 
 +eth0: 00:03:7f:09:0b:ad 
 +athrs27_phy_setup ATHR_PHY_CONTROL 4 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :10 
 +eth0 up 
 +Honey Bee ---->  MAC 1 S27 PHY * 
 +S27 reg init 
 +ATHRS27: resetting s27 
 +ATHRS27: s27 reset done 
 +: cfg1 0x800c0000 cfg2 0x7214 
 +eth1: 00:03:7f:09:0b:ad 
 +athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :10 
 +athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10 
 +athrs27_phy_setup ATHR_PHY_CONTROL 2 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10 
 +athrs27_phy_setup ATHR_PHY_CONTROL 3 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :10 
 +eth1 up 
 +eth0, eth1 
 +Setting 0x181162c0 to 0x50a1a100 
 +press 'q' to stop autoboot: 
 +## Booting image at 9f070000 ... 
 +   Image Name:   7zip Linux Kernel 
 +   Created:      1970-01-01   0:00:00 UTC 
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
 +   Data Size:    -1 Bytes = 4096 MB 
 +   Load Address: 80002000 
 +   Entry Point:  80002000 
 +   Uncompressing Kernel Image with LZMA ... 
 + 
 + Check Image ... 
 + 
 +Image OK! 
 +OK 
 +No initrd 
 +## Transferring control to Linux (at address 80002000) ... 
 +## Giving linux memsize in bytes, 67108864 
 + 
 +Starting kernel ... 
 + 
 +[    0.000000] Linux version 4.19.123 (sebastian@sebastian-msi) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13213+1-146e18af56)) #0 Sun Jun 14 22:04:35 2020 
 +[    0.000000] bootconsole [early0] enabled 
 +[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) 
 +[    0.000000] MIPS: machine is D-Link DAP-2230 A1 
 +[    0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000]  memory: 04000000 @ 00000000 (usable) 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] 
 +[    0.000000] random: get_random_bytes called from start_kernel+0x98/0x4a8 with crng_init=0 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240 
 +[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] Memory: 57452K/65536K available (4328K kernel code, 176K rwdata, 1032K rodata, 1240K init, 206K bss, 8084K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS: 51 
 +[    0.000000] CPU clock: 650.000 MHz 
 +[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns 
 +[    0.000010] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns 
 +[    0.008275] Calibrating delay loop... 431.10 BogoMIPS (lpj=862208) 
 +[    0.042764] pid_max: default: 32768 minimum: 301 
 +[    0.047902] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.054907] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.068060] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 
 +[    0.078417] futex hash table entries: 256 (order: -1, 3072 bytes) 
 +[    0.085056] pinctrl core: initialized pinctrl subsystem 
 +[    0.091911] NET: Registered protocol family 16 
 +[    0.136180] clocksource: Switched to clocksource MIPS 
 +[    0.143196] NET: Registered protocol family 2 
 +[    0.148955] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) 
 +[    0.157190] TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.164573] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.171304] TCP: Hash tables configured (established 1024 bind 1024) 
 +[    0.178221] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.184479] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.191622] NET: Registered protocol family 1 
 +[    0.201968] Crashlog allocated RAM at address 0x3f00000 
 +[    0.209701] workingset: timestamp_bits=14 max_order=14 bucket_order=0 
 +[    0.224884] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.231105] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.259576] io scheduler noop registered 
 +[    0.263800] io scheduler deadline registered (default) 
 +[    0.271731] pinctrl-single 1804002c.pinmux: 576 pins, size 72 
 +[    0.279076] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +[    0.286732] console [ttyS0] disabled 
 +[    0.290623] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A 
 +[    0.299752] console [ttyS0] enabled 
 +[    0.299752] console [ttyS0] enabled 
 +[    0.307318] bootconsole [early0] disabled 
 +[    0.307318] bootconsole [early0] disabled 
 +[    0.326865] m25p80 spi0.0: mx25l12805d (16384 Kbytes) 
 +[    0.332267] 9 fixed-partitions partitions found on MTD device spi0.0 
 +[    0.338851] Creating 9 MTD partitions on "spi0.0": 
 +[    0.343826] 0x000000000000-0x000000040000 : "bootloader" 
 +[    0.350444] 0x000000040000-0x000000050000 : "bdcfg" 
 +[    0.356660] 0x000000050000-0x000000060000 : "rgdb" 
 +[    0.362692] 0x000000060000-0x000000070000 : "unknown" 
 +[    0.369038] 0x000000070000-0x000000f50000 : "firmware" 
 +[    0.381444] 2 wrgg-fw partitions found on MTD device firmware 
 +[    0.387433] Creating 2 MTD partitions on "firmware": 
 +[    0.392605] 0x000000000000-0x000000600000 : "kernel" 
 +[    0.398801] 0x000000600000-0x000000ee0000 : "rootfs" 
 +[    0.404958] mtd: device 6 (rootfs) set to be root filesystem 
 +[    0.413034] 1 squashfs-split partitions found on MTD device rootfs 
 +[    0.419525] 0x000000880000-0x000000ee0000 : "rootfs_data" 
 +[    0.426183] 0x000000f50000-0x000000f70000 : "langpack" 
 +[    0.432726] 0x000000f70000-0x000000fe0000 : "captival" 
 +[    0.439086] 0x000000fe0000-0x000000ff0000 : "certificate" 
 +[    0.445785] 0x000000ff0000-0x000001000000 : "art" 
 +[    0.454246] libphy: Fixed MDIO Bus: probed 
 +[    0.462786] ag71xx 19000000.eth: invalid MAC address, using random address 
 +[    0.785276] ag71xx 19000000.eth: Could not find valid phy node 
 +[    0.791690] ag71xx 1a000000.eth: invalid MAC address, using random address 
 +[    1.136174] random: fast init done 
 +[    1.428639] libphy: ag71xx_mdio: probed 
 +[    1.434269] libphy: ar8xxx-mdio: probed 
 +[    1.448484] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0 
 +[    1.496273] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] 
 +[    1.506393] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii 
 +[    1.513009] i2c /dev entries driver 
 +[    1.518944] NET: Registered protocol family 10 
 +[    1.530569] Segment Routing with IPv6 
 +[    1.534588] NET: Registered protocol family 17 
 +[    1.539335] 8021q: 802.1Q VLAN Support v1.8 
 +[    1.551754] VFS: Mounted root (squashfs filesystem) readonly on device 31:6. 
 +[    1.569355] Freeing unused kernel memory: 1240K 
 +[    1.574079] This architecture does not have kernel memory protection. 
 +[    1.580746] Run /sbin/init as init process 
 +[    2.213717] init: Console is alive 
 +[    2.217682] init: - watchdog - 
 +[    3.064787] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    3.135953] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[    3.154125] init: - preinit - 
 +[    4.169054] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    4.294396] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    4.348741] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    4.562601] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
 +[    5.601392] eth0: link up (1000Mbps/Full duplex) 
 +[    5.606270] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[    8.805703] mount_root: jffs2 not ready yet, using temporary tmpfs overlay 
 +[    8.843991] urandom-seed: Seed file not found (/etc/urandom.seed) 
 +[    8.960152] eth0: link down 
 +[    8.979497] procd: - early - 
 +[    8.982754] procd: - watchdog - 
 +[    9.641713] procd: - watchdog - 
 +[    9.645474] procd: - ubus - 
 +[    9.792818] urandom_read: 5 callbacks suppressed 
 +[    9.792828] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[    9.889568] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[    9.898134] procd: - init - 
 +Please press Enter to activate this console. 
 +[   10.707163] kmodloader: loading kernel modules from /etc/modules.d/
 +[   10.876970] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056 
 +[   10.884881] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb 
 +[   10.973899] xt_time: kernel timezone is -0000 
 +[   11.182784] PPP generic driver version 2.4.2 
 +[   11.201663] NET: Registered protocol family 24 
 +[   11.241676] urngd: v1.0.2 started. 
 +[   11.344775] kmodloader: done loading kernel modules from /etc/modules.d/
 +[   11.492662] random: crng init done 
 +[   33.948429] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 
 +[   33.968270] jffs2_build_filesystem(): unlocking the mtd device... 
 +[   33.968281] done. 
 +[   33.976700] jffs2_build_filesystem(): erasing all blocks after the end marker... 
 +[   34.696521] eth0: link up (1000Mbps/Full duplex) 
 +[   34.712446] br-lan: port 1(eth0) entered blocking state 
 +[   34.717916] br-lan: port 1(eth0) entered disabled state 
 +[   34.723751] device eth0 entered promiscuous mode 
 +[   34.753812] br-lan: port 1(eth0) entered blocking state 
 +[   34.759264] br-lan: port 1(eth0) entered forwarding state 
 +[   34.765141] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready 
 +[   35.714546] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[   56.220747] done. 
 +[   56.222795] jffs2: notice: (1366) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. 
 +[   56.435633] overlayfs: upper fs does not support tmpfile. 
 + 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1