Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:d-link:aquila_pro_ai_m30_a1 [2024/07/27 14:43] – [OpenWrt bootlog] rolandomagicotoh:d-link:aquila_pro_ai_m30_a1 [2024/07/27 14:45] – [OEM bootlog] rolandomagico
Line 338: Line 338:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki> 
 +F0: 102B 0000 
 +FA: 1040 0000 
 +FA: 1040 0000 [0200] 
 +F9: 0000 0000 
 +V0: 0000 0000 [0001] 
 +00: 0000 0000 
 +BP: 2400 0041 [0000] 
 +G0: 1190 0000 
 +EC: 0000 0000 [1000] 
 +T0: 0000 025A [010F] 
 +Jump to BL 
 + 
 +NOTICE:  BL2: v2.7(release):25a94a7 
 +NOTICE:  BL2: Built : 11:34:45, Sep 19 2022 
 +NOTICE:  WDT: disabled 
 +NOTICE:  EMI: Using DDR3 settings 
 + 
 +dump toprgu registers data: 
 +1001c000 | 00000000 0000ffe0 00000000 00000000 
 +1001c010 | 00000fff 00000000 00f00000 00000000 
 +1001c020 | 00000000 00000000 00000000 00000000 
 +1001c030 | 003c0003 003c0003 00000000 00000000 
 +1001c040 | 00000000 00000000 00000000 00000000 
 +1001c050 | 00000000 00000000 00000000 00000000 
 +1001c060 | 00000000 00000000 00000000 00000000 
 +1001c070 | 00000000 00000000 00000000 00000000 
 +1001c080 | 00000000 00000000 00000000 00000000 
 + 
 +dump drm registers data: 
 +1001d000 | 00000000 00000000 00000000 00000000 
 +1001d010 | 00000000 00000000 00000000 00000000 
 +1001d020 | 00000000 00000000 00000000 00000000 
 +1001d030 | 00a083f1 000003ff 00100000 00000000 
 +1001d040 | 00000000 00000000 00020303 000000ff 
 +1001d050 | 00000000 00000000 00000000 00000000 
 +1001d060 | 00000002 00000000 00000000 00000000 
 +drm: 500 = 0x8 
 +[DDR Reserve] ddr reserve mode not be enabled yet 
 +DDR RESERVE Success 0 
 +[EMI] ComboMCP not ready, using default setting 
 +BYTE_swap:
 +BYTE_swap:
 +Window Sum 568, worse bit 2, min window 68 
 +Window Sum 576, worse bit 8, min window 72 
 +Window Sum 326, worse bit 3, min window 36 
 +Window Sum 320, worse bit 9, min window 36 
 +Window Sum 346, worse bit 2, min window 40 
 +Window Sum 340, worse bit 9, min window 40 
 +Window Sum 362, worse bit 3, min window 42 
 +Window Sum 348, worse bit 9, min window 42 
 +Window Sum 378, worse bit 3, min window 44 
 +Window Sum 368, worse bit 9, min window 44 
 +Window Sum 392, worse bit 2, min window 46 
 +Window Sum 380, worse bit 9, min window 46 
 +Window Sum 404, worse bit 6, min window 48 
 +Window Sum 402, worse bit 9, min window 48 
 +Window Sum 418, worse bit 2, min window 50 
 +Window Sum 406, worse bit 15, min window 48 
 +Window Sum 426, worse bit 6, min window 50 
 +Window Sum 420, worse bit 14, min window 50 
 +Window Sum 448, worse bit 3, min window 54 
 +Window Sum 434, worse bit 15, min window 52 
 +Window Sum 452, worse bit 2, min window 54 
 +Window Sum 444, worse bit 9, min window 54 
 +Window Sum 462, worse bit 4, min window 54 
 +Window Sum 454, worse bit 8, min window 56 
 +Window Sum 474, worse bit 6, min window 56 
 +Window Sum 464, worse bit 9, min window 56 
 +Window Sum 478, worse bit 3, min window 58 
 +Window Sum 468, worse bit 14, min window 56 
 +Window Sum 482, worse bit 4, min window 58 
 +NOTICE:  EMI: Detected DRAM size: 512MB 
 +NOTICE:  EMI: complex R/W mem test passed 
 +NOTICE:  CPU: MT7981 (1300MHz) 
 +NOTICE:  SPI_NAND parses attributes from parameter page. 
 +NOTICE:  SPI_NAND Detected ID 0xc2 
 +NOTICE:  Page size 2048, Block size 131072, size 134217728 
 +NOTICE:  Initializing NMBM ... 
 +NOTICE:  Signature found at block 1023 [0x07fe0000] 
 +NOTICE:  First info table with writecount 2 found in block 960 
 +NOTICE:  Second info table with writecount 2 found in block 963 
 +NOTICE:  NMBM has been successfully attached in read-only mode 
 +NOTICE:  BL2: Booting BL31 
 +NOTICE:  BL31: v2.7(release):25a94a7 
 +NOTICE:  BL31: Built : 11:34:45, Sep 19 2022 
 +NOTICE:  Hello BL31!!! 
 + 
 + 
 +U-Boot 2022.07-rc3-g091472d6-dirty (Aug 04 2023 - 08:42:13 +0000) 
 + 
 +CPU:   MediaTek MT7981 
 +Model: mt7981-rfb 
 +DRAM:  512 MiB 
 +Core:  38 devices, 16 uclasses, devicetree: embed 
 + 
 +Initializing NMBM(mt7981_rfb) ... 
 +spi-nand: spi_nand spi_nand@0: Macronix SPI NAND was found. 
 +spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 
 +Could not find a valid device for nmbm0 
 +Signature found at block 1023 [0x07fe0000] 
 +First info table with writecount 2 found in block 960 
 +Second info table with writecount 2 found in block 963 
 +NMBM has been successfully attached 
 + 
 +Loading Environment from MTD... OK 
 +In:    serial@11002000 
 +Out:   serial@11002000 
 +Err:   serial@11002000 
 +Net:   eth0: ethernet@15100000 
 +Setting bus to 0 
 +Error writing the chip: -121 
 +Error writing the chip: -121 
 +Error writing the chip: -121 
 +gpio: pin 0 (gpio 0) value is 1 
 + 
 +  *** U-Boot Boot Menu *** 
 + 
 +      1. Startup system (Default) 
 +      2. Upgrade firmware 
 +      3. Upgrade ATF BL2 
 +      4. Upgrade ATF FIP 
 +      5. Http Upgrade 
 +      6. Upgrade single image 
 +      7. Load image 
 +      0. U-Boot console 
 + 
 + 
 +  Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit 
 +aup_command::do multicast-upgrade checking 
 +aup_start 
 +start load_p_section 
 +Reading from 0x0 to 0x5ffabda8, size 0x10 ... OK 
 +load_section: start p mode 
 +Reading from 0x0 to 0x5ffabda8, size 0x14cb ... OK 
 +load_section: found csxf tag 
 +csxf->magic: 5343 
 +csxf->checksum: c7e1 
 +csxf->body_length: 000014ab 
 +csxf->body_encoding: 00 
 +csxf->raw_length: 000014ab 
 +check p section: ok 
 +load P section success 
 + romid: (DLK6E6110001) 
 + sys info PV 01 
 + model name: (M30) 
 + ecn no: (200909100001) 
 + beid rule: 190A 
 + beid mac: XX:XX:XX:XX:XX:CC 
 + default ip: 192:168:200:
 +aup_start Using ethernet@15100000 device 
 +mcast upgrade timeout. 
 +ubi_boot_image:569 ubi 
 +ubi0: attaching mtd6 
 +ubi0: scanning is finished 
 +ubi0: attached mtd6 (name "ubi", size 50 MiB) 
 +ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 
 +ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 
 +ubi0: max/mean erase counter: 102/62, WL threshold: 4096, image sequence number: 1571737675 
 +ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 19 
 +Reading from volume 'kernel' to 0x46000000, size 0x0 ... OK 
 +## Loading kernel from FIT Image at 46000000 ... 
 +   Using 'config-1' configuration 
 +   Trying 'kernel-1' kernel subimage 
 +     Description:  ARM64 mt7981-dlink Linux-5.4.171 
 +     Type:         Kernel Image 
 +     Compression:  lzma compressed 
 +     Data Start:   0x460000f0 
 +     Data Size:    3893088 Bytes = 3.7 MiB 
 +     Architecture: AArch64 
 +     OS:           Linux 
 +     Load Address: 0x48080000 
 +     Entry Point:  0x48080000 
 +     Hash algo:    crc32 
 +     Hash value:   0c040d6c 
 +     Hash algo:    sha1 
 +     Hash value:   ad2657f24f37363728a56553bddf8ae51535d152 
 +   Verifying Hash Integrity ... crc32+ sha1+ OK 
 +## Loading fdt from FIT Image at 46000000 ... 
 +   Using 'config-1' configuration 
 +   Trying 'fdt-1' fdt subimage 
 +     Description:  ARM64 mt7981-dlink device tree blob 
 +     Type:         Flat Device Tree 
 +     Compression:  uncompressed 
 +     Data Start:   0x463b6984 
 +     Data Size:    18264 Bytes = 17.8 KiB 
 +     Architecture: AArch64 
 +     Hash algo:    crc32 
 +     Hash value:   c051447f 
 +     Hash algo:    sha1 
 +     Hash value:   ef5b1dc89fb45537f95f900729a8703407ec9b14 
 +   Verifying Hash Integrity ... crc32+ sha1+ OK 
 +   Booting using the fdt blob at 0x463b6984 
 +   Uncompressing Kernel Image 
 +   Loading Device Tree to 000000005ebf3000, end 000000005ebfa757 ... OK 
 +fdt_chosen:308 (console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 bootpart=ubi0) 
 + 
 +Starting kernel ... 
 + 
 +[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 
 +[    0.000000] Linux version 5.4.171 (oe-user@oe-host) (gcc version 10.2.0 (GCC)) #1 SMP Fri Feb 24 10:07:55 UTC 2023 
 +[    0.000000] OF: fdt: search "chosen", depth: 0, uname: 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: cpus 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: cpu@0 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: cpu@1 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: pwm@10048000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: thermal-zones 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: cpu-thermal 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: thermal@1100c800 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: adc@1100d000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: wed@15010000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: wdma@15104800 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: ap2woccif@151A5000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: wocpu0_ilm@151E0000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: wocpu_dlm@151E8000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: wocpu_boot@15194000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: reserved-memory 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: secmon@43000000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: wmcpu-reserved@47C80000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: wocpu0_emi@47D80000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: wocpu_data@47DC0000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: psci 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: oscillator@0 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: infracfg_ao@10001000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: infracfg@10001040 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: topckgen@1001B000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: apmixedsys@1001E000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: dummy_system_clk 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: dummy_gpt_clk 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: timer 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: watchdog@1001c000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: interrupt-controller@c000000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: trng@1020f000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: serial@11002000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: serial@11003000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: serial@11004000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: i2c@11007000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: wm8960@1a 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: pcie@11280000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: interrupt-controller 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: crypto@10320000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: pinctrl@11d00000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: i2c-pins-g0 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: mux 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: pcm-pins-g0 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: mux 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: pwm0-pin-g0 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: mux 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: pwm1-pin-g0 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: mux 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: pwm2-pin 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: mux 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: spi0-pins 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: mux 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: conf-pu 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: conf-pd 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: spi1-pins 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: mux 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: uart1-pins-g1 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: mux 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: uart2-pins-g1 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: mux 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: syscon@15000000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: reset-controller 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: ethernet@15100000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: mac@0 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: fixed-link 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: mac@1 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: mdio-bus 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: ethernet-phy@0 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: switch@0 
 +[    0.000000] OF: fdt: search "chosen", depth: 4, uname: ports 
 +[    0.000000] OF: fdt: search "chosen", depth: 5, uname: port@0 
 +[    0.000000] OF: fdt: search "chosen", depth: 5, uname: port@1 
 +[    0.000000] OF: fdt: search "chosen", depth: 5, uname: port@2 
 +[    0.000000] OF: fdt: search "chosen", depth: 5, uname: port@3 
 +[    0.000000] OF: fdt: search "chosen", depth: 5, uname: port@6 
 +[    0.000000] OF: fdt: search "chosen", depth: 6, uname: fixed-link 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: hnat@15000000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: syscon@10060000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: syscon@10070000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: topmisc@11d10000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: snfi@11005000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: mmc@11230000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: wbsys@18000000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: wed_pcie@10003000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: spi@1100a000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: spi_nand@0 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: spi@1100b000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: proslic_spi@0 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: spi@11009000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: consys@10000000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: xhci@11200000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: usb-phy@11e10000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: usb-phy@11e10000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: usb-phy@11e10700 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: regulator-3p3v 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: clkitg 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: bring-up 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: efuse@11f20000 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: calib@274 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: calib@8dc 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: audio-controller@11210000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: ice_debug 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: nmbm_spim_nand 
 +[    0.000000] OF: fdt: search "chosen", depth: 2, uname: partitions 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@0 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@100000 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@180000 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@380000 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@580000 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@3780000 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@6980000 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@69c0000 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@6a40000 
 +[    0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@6ac0000 
 +[    0.000000] OF: fdt: search "chosen", depth: 1, uname: chosen 
 +[    0.000000] OF: fdt: Looking for initrd properties... 
 +[    0.000000] OF: fdt: Command line is: console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 bootpart=ubi0 
 +[    0.000000] OF: fdt: dt_root_size_cells = 2 
 +[    0.000000] OF: fdt: dt_root_addr_cells = 2 
 +[    0.000000] OF: fdt: memory scan node memory, reg size 16, 
 +[    0.000000] OF: fdt:  - 40000000 ,  20000000 
 +[    0.000000] Machine model: MediaTek MT7981 RFB 
 +[    0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options ''
 +[    0.000000] printk: bootconsole [uart8250] enabled 
 +[    0.000000] OF: fdt: Reserved memory: reserved region for node 'secmon@43000000': base 0x0000000043000000, size 0 MiB 
 +[    0.000000] OF: fdt: Reserved memory: reserved region for node 'wmcpu-reserved@47C80000': base 0x0000000047c80000, size 1 MiB 
 +[    0.000000] OF: fdt: Reserved memory: reserved region for node 'wocpu0_emi@47D80000': base 0x0000000047d80000, size 0 MiB 
 +[    0.000000] OF: fdt: Reserved memory: reserved region for node 'wocpu_data@47DC0000': base 0x0000000047dc0000, size 2 MiB 
 +[    0.000000] OF: fdt:  -> unflatten_device_tree() 
 +[    0.000000] OF: fdt: Unflattening device tree: 
 +[    0.000000] OF: fdt: magic: d00dfeed 
 +[    0.000000] OF: fdt: size: 00005000 
 +[    0.000000] OF: fdt: version: 00000011 
 +[    0.000000] OF: fdt:   size is 78652, allocating... 
 +[    0.000000] OF: fdt:   unflattening (____ptrval____)... 
 +[    0.000000] OF: fdt: fixed up name for  -> 
 +[    0.000000] OF: fdt: fixed up name for cpus -> cpus 
 +[    0.000000] OF: fdt: fixed up name for cpu@0 -> cpu 
 +[    0.000000] OF: fdt: fixed up name for cpu@1 -> cpu 
 +[    0.000000] OF: fdt: fixed up name for pwm@10048000 -> pwm 
 +[    0.000000] OF: fdt: fixed up name for thermal-zones -> thermal-zones 
 +[    0.000000] OF: fdt: fixed up name for cpu-thermal -> cpu-thermal 
 +[    0.000000] OF: fdt: fixed up name for thermal@1100c800 -> thermal 
 +[    0.000000] OF: fdt: fixed up name for adc@1100d000 -> adc 
 +[    0.000000] OF: fdt: fixed up name for wed@15010000 -> wed 
 +[    0.000000] OF: fdt: fixed up name for wdma@15104800 -> wdma 
 +[    0.000000] OF: fdt: fixed up name for ap2woccif@151A5000 -> ap2woccif 
 +[    0.000000] OF: fdt: fixed up name for wocpu0_ilm@151E0000 -> wocpu0_ilm 
 +[    0.000000] OF: fdt: fixed up name for wocpu_dlm@151E8000 -> wocpu_dlm 
 +[    0.000000] OF: fdt: fixed up name for wocpu_boot@15194000 -> wocpu_boot 
 +[    0.000000] OF: fdt: fixed up name for reserved-memory -> reserved-memory 
 +[    0.000000] OF: fdt: fixed up name for secmon@43000000 -> secmon 
 +[    0.000000] OF: fdt: fixed up name for wmcpu-reserved@47C80000 -> wmcpu-reserved 
 +[    0.000000] OF: fdt: fixed up name for wocpu0_emi@47D80000 -> wocpu0_emi 
 +[    0.000000] OF: fdt: fixed up name for wocpu_data@47DC0000 -> wocpu_data 
 +[    0.000000] OF: fdt: fixed up name for psci -> psci 
 +[    0.000000] OF: fdt: fixed up name for oscillator@0 -> oscillator 
 +[    0.000000] OF: fdt: fixed up name for infracfg_ao@10001000 -> infracfg_ao 
 +[    0.000000] OF: fdt: fixed up name for infracfg@10001040 -> infracfg 
 +[    0.000000] OF: fdt: fixed up name for topckgen@1001B000 -> topckgen 
 +[    0.000000] OF: fdt: fixed up name for apmixedsys@1001E000 -> apmixedsys 
 +[    0.000000] OF: fdt: fixed up name for dummy_system_clk -> dummy_system_clk 
 +[    0.000000] OF: fdt: fixed up name for dummy_gpt_clk -> dummy_gpt_clk 
 +[    0.000000] OF: fdt: fixed up name for timer -> timer 
 +[    0.000000] OF: fdt: fixed up name for watchdog@1001c000 -> watchdog 
 +[    0.000000] OF: fdt: fixed up name for interrupt-controller@c000000 -> interrupt-controller 
 +[    0.000000] OF: fdt: fixed up name for trng@1020f000 -> trng 
 +[    0.000000] OF: fdt: fixed up name for serial@11002000 -> serial 
 +[    0.000000] OF: fdt: fixed up name for serial@11003000 -> serial 
 +[    0.000000] OF: fdt: fixed up name for serial@11004000 -> serial 
 +[    0.000000] OF: fdt: fixed up name for i2c@11007000 -> i2c 
 +[    0.000000] OF: fdt: fixed up name for wm8960@1a -> wm8960 
 +[    0.000000] OF: fdt: fixed up name for pcie@11280000 -> pcie 
 +[    0.000000] OF: fdt: fixed up name for interrupt-controller -> interrupt-controller 
 +[    0.000000] OF: fdt: fixed up name for crypto@10320000 -> crypto 
 +[    0.000000] OF: fdt: fixed up name for pinctrl@11d00000 -> pinctrl 
 +[    0.000000] OF: fdt: fixed up name for i2c-pins-g0 -> i2c-pins-g0 
 +[    0.000000] OF: fdt: fixed up name for mux -> mux 
 +[    0.000000] OF: fdt: fixed up name for pcm-pins-g0 -> pcm-pins-g0 
 +[    0.000000] OF: fdt: fixed up name for mux -> mux 
 +[    0.000000] OF: fdt: fixed up name for pwm0-pin-g0 -> pwm0-pin-g0 
 +[    0.000000] OF: fdt: fixed up name for mux -> mux 
 +[    0.000000] OF: fdt: fixed up name for pwm1-pin-g0 -> pwm1-pin-g0 
 +[    0.000000] OF: fdt: fixed up name for mux -> mux 
 +[    0.000000] OF: fdt: fixed up name for pwm2-pin -> pwm2-pin 
 +[    0.000000] OF: fdt: fixed up name for mux -> mux 
 +[    0.000000] OF: fdt: fixed up name for spi0-pins -> spi0-pins 
 +[    0.000000] OF: fdt: fixed up name for mux -> mux 
 +[    0.000000] OF: fdt: fixed up name for conf-pu -> conf-pu 
 +[    0.000000] OF: fdt: fixed up name for conf-pd -> conf-pd 
 +[    0.000000] OF: fdt: fixed up name for spi1-pins -> spi1-pins 
 +[    0.000000] OF: fdt: fixed up name for mux -> mux 
 +[    0.000000] OF: fdt: fixed up name for uart1-pins-g1 -> uart1-pins-g1 
 +[    0.000000] OF: fdt: fixed up name for mux -> mux 
 +[    0.000000] OF: fdt: fixed up name for uart2-pins-g1 -> uart2-pins-g1 
 +[    0.000000] OF: fdt: fixed up name for mux -> mux 
 +[    0.000000] OF: fdt: fixed up name for syscon@15000000 -> syscon 
 +[    0.000000] OF: fdt: fixed up name for reset-controller -> reset-controller 
 +[    0.000000] OF: fdt: fixed up name for ethernet@15100000 -> ethernet 
 +[    0.000000] OF: fdt: fixed up name for mac@0 -> mac 
 +[    0.000000] OF: fdt: fixed up name for fixed-link -> fixed-link 
 +[    0.000000] OF: fdt: fixed up name for mac@1 -> mac 
 +[    0.000000] OF: fdt: fixed up name for mdio-bus -> mdio-bus 
 +[    0.000000] OF: fdt: fixed up name for ethernet-phy@0 -> ethernet-phy 
 +[    0.000000] OF: fdt: fixed up name for switch@0 -> switch 
 +[    0.000000] OF: fdt: fixed up name for ports -> ports 
 +[    0.000000] OF: fdt: fixed up name for port@0 -> port 
 +[    0.000000] OF: fdt: fixed up name for port@1 -> port 
 +[    0.000000] OF: fdt: fixed up name for port@2 -> port 
 +[    0.000000] OF: fdt: fixed up name for port@3 -> port 
 +[    0.000000] OF: fdt: fixed up name for port@6 -> port 
 +[    0.000000] OF: fdt: fixed up name for fixed-link -> fixed-link 
 +[    0.000000] OF: fdt: fixed up name for hnat@15000000 -> hnat 
 +[    0.000000] OF: fdt: fixed up name for syscon@10060000 -> syscon 
 +[    0.000000] OF: fdt: fixed up name for syscon@10070000 -> syscon 
 +[    0.000000] OF: fdt: fixed up name for topmisc@11d10000 -> topmisc 
 +[    0.000000] OF: fdt: fixed up name for snfi@11005000 -> snfi 
 +[    0.000000] OF: fdt: fixed up name for mmc@11230000 -> mmc 
 +[    0.000000] OF: fdt: fixed up name for wbsys@18000000 -> wbsys 
 +[    0.000000] OF: fdt: fixed up name for wed_pcie@10003000 -> wed_pcie 
 +[    0.000000] OF: fdt: fixed up name for spi@1100a000 -> spi 
 +[    0.000000] OF: fdt: fixed up name for spi_nand@0 -> spi_nand 
 +[    0.000000] OF: fdt: fixed up name for spi@1100b000 -> spi 
 +[    0.000000] OF: fdt: fixed up name for proslic_spi@0 -> proslic_spi 
 +[    0.000000] OF: fdt: fixed up name for spi@11009000 -> spi 
 +[    0.000000] OF: fdt: fixed up name for consys@10000000 -> consys 
 +[    0.000000] OF: fdt: fixed up name for xhci@11200000 -> xhci 
 +[    0.000000] OF: fdt: fixed up name for usb-phy@11e10000 -> usb-phy 
 +[    0.000000] OF: fdt: fixed up name for usb-phy@11e10000 -> usb-phy 
 +[    0.000000] OF: fdt: fixed up name for usb-phy@11e10700 -> usb-phy 
 +[    0.000000] OF: fdt: fixed up name for regulator-3p3v -> regulator-3p3v 
 +[    0.000000] OF: fdt: fixed up name for clkitg -> clkitg 
 +[    0.000000] OF: fdt: fixed up name for bring-up -> bring-up 
 +[    0.000000] OF: fdt: fixed up name for efuse@11f20000 -> efuse 
 +[    0.000000] OF: fdt: fixed up name for calib@274 -> calib 
 +[    0.000000] OF: fdt: fixed up name for calib@8dc -> calib 
 +[    0.000000] OF: fdt: fixed up name for audio-controller@11210000 -> audio-controller 
 +[    0.000000] OF: fdt: fixed up name for ice_debug -> ice_debug 
 +[    0.000000] OF: fdt: fixed up name for nmbm_spim_nand -> nmbm_spim_nand 
 +[    0.000000] OF: fdt: fixed up name for partitions -> partitions 
 +[    0.000000] OF: fdt: fixed up name for partition@0 -> partition 
 +[    0.000000] OF: fdt: fixed up name for partition@100000 -> partition 
 +[    0.000000] OF: fdt: fixed up name for partition@180000 -> partition 
 +[    0.000000] OF: fdt: fixed up name for partition@380000 -> partition 
 +[    0.000000] OF: fdt: fixed up name for partition@580000 -> partition 
 +[    0.000000] OF: fdt: fixed up name for partition@3780000 -> partition 
 +[    0.000000] OF: fdt: fixed up name for partition@6980000 -> partition 
 +[    0.000000] OF: fdt: fixed up name for partition@69c0000 -> partition 
 +[    0.000000] OF: fdt: fixed up name for partition@6a40000 -> partition 
 +[    0.000000] OF: fdt: fixed up name for partition@6ac0000 -> partition 
 +[    0.000000] OF: fdt: fixed up name for chosen -> chosen 
 +[    0.000000] OF: fdt: fixed up name for memory -> memory 
 +[    0.000000] OF: fdt: fixed up name for leds -> leds 
 +[    0.000000] OF: fdt: fixed up name for power_green -> power_green 
 +[    0.000000] OF: fdt: fixed up name for power_red -> power_red 
 +[    0.000000] OF: fdt: fixed up name for wlan_2g_red -> wlan_2g_red 
 +[    0.000000] OF: fdt: fixed up name for wlan_5g_red -> wlan_5g_red 
 +[    0.000000] OF: fdt: fixed up name for gpio-keys -> gpio-keys 
 +[    0.000000] OF: fdt: fixed up name for rst_btn -> rst_btn 
 +[    0.000000] OF: fdt: fixed up name for wps_btn -> wps_btn 
 +[    0.000000] OF: fdt: fixed up name for onoff_btn -> onoff_btn 
 +[    0.000000] OF: fdt:  <- unflatten_device_tree() 
 +[    0.000000] On node 0 totalpages: 130128 
 +[    0.000000]   DMA32 zone: 2048 pages used for memmap 
 +[    0.000000]   DMA32 zone: 0 pages reserved 
 +[    0.000000]   DMA32 zone: 130128 pages, LIFO batch:31 
 +[    0.000000] psci: probing for conduit method from DT. 
 +[    0.000000] psci: PSCIv1.1 detected in firmware. 
 +[    0.000000] psci: Using standard PSCI v0.2 function IDs 
 +[    0.000000] psci: MIGRATE_INFO_TYPE not supported. 
 +[    0.000000] psci: SMC Calling Convention v1.0 
 +[    0.000000] percpu: Embedded 20 pages/cpu s43864 r8192 d29864 u81920 
 +[    0.000000] pcpu-alloc: s43864 r8192 d29864 u81920 alloc=20*4096 
 +[    0.000000] pcpu-alloc: [0] 0 [0] 1 
 +[    0.000000] Detected VIPT I-cache on CPU0 
 +[    0.000000] CPU features: detected: GIC system register CPU interface 
 +[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 128080 
 +[    0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 bootpart=ubi0 
 +[    0.000000] start rootfs@ubi 
 +[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 490496K/520512K available (7998K kernel code, 566K rwdata, 2180K rodata, 448K init, 305K bss, 30016K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 
 +[    0.000000] rcu: Hierarchical RCU implementation. 
 +[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32. 
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. 
 +[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 
 +[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode 
 +[    0.000000] GICv3: 640 SPIs implemented 
 +[    0.000000] GICv3: 0 Extended SPIs implemented 
 +[    0.000000] GICv3: Distributor has no Range Selector support 
 +[    0.000000] GICv3: 16 PPIs implemented 
 +[    0.000000] GICv3: no VLPI support, no direct LPI support 
 +[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 
 +[    0.000000] random: get_random_bytes called from start_kernel+0x334/0x478 with crng_init=0 
 +[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). 
 +[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns 
 +[    0.000003] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns 
 +[    0.008182] Console: colour dummy device 80x25 
 +[    0.012666] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=52000) 
 +[    0.022985] pid_max: default: 32768 minimum: 301 
 +[    0.027697] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) 
 +[    0.035047] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) 
 +[    0.043631] ASID allocator initialised with 65536 entries 
 +[    0.049124] rcu: Hierarchical SRCU implementation. 
 +[    0.054202] smp: Bringing up secondary CPUs ... 
 +[    0.059029] Detected VIPT I-cache on CPU1 
 +[    0.059048] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 
 +[    0.059069] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] 
 +[    0.059128] smp: Brought up 1 node, 2 CPUs 
 +[    0.080739] SMP: Total of 2 processors activated. 
 +[    0.085464] CPU features: detected: 32-bit EL0 Support 
 +[    0.090626] CPU features: detected: CRC32 instructions 
 +[    0.095889] CPU: All CPU(s) started at EL2 
 +[    0.100010] alternatives: patching kernel code 
 +[    0.104940] devtmpfs: initialized 
 +[    0.110244] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 
 +[    0.120060] futex hash table entries: 512 (order: 3, 32768 bytes, linear) 
 +[    0.126950] pinctrl core: initialized pinctrl subsystem 
 +[    0.132707] NET: Registered protocol family 16 
 +[    0.137395] DMA: preallocated 256 KiB pool for atomic allocations 
 +[    0.157595] cryptd: max_cpu_qlen set to 1000 
 +[    0.163401] iommu: Default domain type: Translated 
 +[    0.168476] SCSI subsystem initialized 
 +[    0.173003] libata version 3.00 loaded. 
 +[    0.177110] usbcore: registered new interface driver usbfs 
 +[    0.182665] usbcore: registered new interface driver hub 
 +[    0.188031] usbcore: registered new device driver usb 
 +[    0.194106] rbus 18000000.wbsys: PCI host bridge to bus 0000:00 
 +[    0.200069] pci_bus 0000:00: root bus resource [mem 0x18000000-0x18ffffff] 
 +[    0.206980] pci_bus 0000:00: root bus resource [bus 00-ff] 
 +[    0.212492] pci_bus 0000:00: scanning bus 
 +[    0.216531] pci 0000:00:00.0: [14c3:7981] type 00 class 0x000280 
 +[    0.222579] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x1800000f 64bit] 
 +[    0.229402] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0000000f] 
 +[    0.235701] pci 0000:00:00.0: reg 0x1c: [mem 0x00000000-0x0000000f] 
 +[    0.242000] pci 0000:00:00.0: reg 0x20: [mem 0x00000000-0x0000000f] 
 +[    0.248298] pci 0000:00:00.0: reg 0x24: [mem 0x00000000-0x0000000f] 
 +[    0.255389] pci_bus 0000:00: fixups for bus 
 +[    0.259596] pci_bus 0000:00: bus scan returning with max=00 
 +[    0.265497] clocksource: Switched to clocksource arch_sys_counter 
 +[    0.277095] thermal_sys: Registered thermal governor 'fair_share' 
 +[    0.277098] thermal_sys: Registered thermal governor 'bang_bang' 
 +[    0.283247] thermal_sys: Registered thermal governor 'step_wise' 
 +[    0.289285] thermal_sys: Registered thermal governor 'user_space' 
 +[    0.295320] thermal_sys: Registered thermal governor 'power_allocator' 
 +[    0.301662] NET: Registered protocol family 2 
 +[    0.312683] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) 
 +[    0.320609] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) 
 +[    0.329099] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) 
 +[    0.336909] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) 
 +[    0.344123] TCP: Hash tables configured (established 4096 bind 4096) 
 +[    0.350570] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.357141] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.364219] NET: Registered protocol family 1 
 +[    0.368619] PCI: CLS 0 bytes, default 64 
 +[    0.373436] workingset: timestamp_bits=46 max_order=17 bucket_order=0 
 +[    0.383504] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.389506] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZO) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.400856] fuse: init (API version 7.31) 
 +[    0.417723] phy phy-usb-phy@11e10000.1: type_sw - reg 0x218, index 0 
 +[    0.434968] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled 
 +[    0.442443] printk: console [ttyS0] disabled 
 +[    0.466928] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 12, base_baud = 2500000) is a ST16650V2 
 +[    0.476137] printk: console [ttyS0] enabled 
 +[    0.476137] printk: console [ttyS0] enabled 
 +[    0.484495] printk: bootconsole [uart8250] disabled 
 +[    0.484495] printk: bootconsole [uart8250] disabled 
 +[    0.494919] mtk_rng trng@1020f000: registered RNG driver 
 +[    0.494937] random: fast init done 
 +[    0.503700] random: crng init done 
 +[    0.507306] cacheinfo: Unable to detect cache hierarchy for CPU 0 
 +[    0.515822] loop: module loaded 
 +[    0.519116] mediatek,mt2701-ice_debug ice_debug: get dbg_sel clock fail: -2 
 +[    0.526081] mediatek,mt2701-ice_debug: probe of ice_debug failed with error -2 
 +[    0.534116] mt7981-pinctrl 11d00000.pinctrl: pin_config_set op failed for pin 19 
 +[    0.541515] mtk-spi 1100a000.spi: Error applying setting, reverse things back 
 +[    0.549127] spi-nand spi0.0: Macronix SPI NAND was found. 
 +[    0.554542] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 
 +[    0.564132] libphy: Fixed MDIO Bus: probed 
 +[    0.580022] libphy: mdio: probed 
 +[    0.583682] mtk_soc_eth 15100000.ethernet: generated random MAC address 9e:86:ac:15:77:57 
 +[    0.592146] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc011c00000, irq 76 
 +[    0.601216] mtk_soc_eth 15100000.ethernet: generated random MAC address 9a:5b:95:8a:85:d5 
 +[    0.609648] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc011c00000, irq 76 
 +[    0.618689] (unnamed net_device) (dummy): netif_napi_add() called with weight 256 
 +[    0.626323] PPP generic driver version 2.4.2 
 +[    0.630709] PPP BSD Compression module registered 
 +[    0.635414] PPP Deflate Compression module registered 
 +[    0.640498] PPP MPPE Compression module registered 
 +[    0.645280] NET: Registered protocol family 24 
 +[    0.649728] PPTP driver version 0.8.5 
 +[    0.653718] xhci-mtk 11200000.xhci: 11200000.xhci supply vbus not found, using dummy regulator 
 +[    0.662351] xhci-mtk 11200000.xhci: 11200000.xhci supply vusb33 not found, using dummy regulator 
 +[    0.671357] xhci-mtk 11200000.xhci: xHCI Host Controller 
 +[    0.676679] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 1 
 +[    0.687212] xhci-mtk 11200000.xhci: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000210010 
 +[    0.696453] xhci-mtk 11200000.xhci: irq 86, io mem 0x11200000 
 +[    0.702688] hub 1-0:1.0: USB hub found 
 +[    0.706472] hub 1-0:1.0: 1 port detected 
 +[    0.710644] xhci-mtk 11200000.xhci: xHCI Host Controller 
 +[    0.715961] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 2 
 +[    0.723441] xhci-mtk 11200000.xhci: Host supports USB 3.2 Enhanced SuperSpeed 
 +[    0.730617] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. 
 +[    0.739066] hub 2-0:1.0: USB hub found 
 +[    0.742845] hub 2-0:1.0: 1 port detected 
 +[    0.747167] i2c /dev entries driver 
 +[    0.752075] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) 
 +[    0.760145] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com 
 +[    0.769566] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433,alg:7fcdfc00 
 +[    0.782110] usbcore: registered new interface driver usbhid 
 +[    0.787704] usbhid: USB HID core driver 
 +[    0.792951] u32 classifier 
 +[    0.795671]     input device check on 
 +[    0.799639] xt_time: kernel timezone is -0000 
 +[    0.804088] gre: GRE over IPv4 demultiplexor driver 
 +[    0.808957] ip_gre: GRE over IPv4 tunneling driver 
 +[    0.814676] Initializing XFRM netlink socket 
 +[    0.819279] NET: Registered protocol family 10 
 +[    0.824489] Segment Routing with IPv6 
 +[    0.828358] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 
 +[    0.834999] NET: Registered protocol family 17 
 +[    0.839505] Bridge firewalling registered 
 +[    0.843667] l2tp_core: L2TP core driver, V2.0 
 +[    0.848043] l2tp_ppp: PPPoL2TP kernel driver, V2.0 
 +[    0.852825] 8021q: 802.1Q VLAN Support v1.8 
 +[    0.865985] nmbm nmbm_spim_nand: Signature found at block 1023 [0x07fe0000] 
 +[    0.873592] nmbm nmbm_spim_nand: First info table with writecount 2 found in block 960 
 +[    0.883452] nmbm nmbm_spim_nand: Second info table with writecount 2 found in block 963 
 +[    0.891452] nmbm nmbm_spim_nand: NMBM has been successfully attached 
 +[    0.898027] 10 fixed-partitions partitions found on MTD device nmbm_spim_nand 
 +[    0.905158] Creating 10 MTD partitions on "nmbm_spim_nand": 
 +[    0.910724] 0x000000000000-0x000000100000 : "BL2" 
 +[    0.916019] 0x000000100000-0x000000180000 : "u-boot-env" 
 +[    0.921962] 0x000000180000-0x000000380000 : "Factory" 
 +[    0.927565] 0x000000380000-0x000000580000 : "FIP" 
 +[    0.932818] 0x000000580000-0x000003780000 : "ubi" 
 +[    0.938147] 0x000003780000-0x000006980000 : "ubi1" 
 +[    0.943552] 0x000006980000-0x0000069c0000 : "Odm" 
 +[    0.948796] 0x0000069c0000-0x000006a40000 : "Config1" 
 +[    0.954382] 0x000006a40000-0x000006ac0000 : "Config2" 
 +[    0.959972] 0x000006ac0000-0x0000074c0000 : "Storage" 
 +[    1.175505] libphy: dsa slave smi: probed 
 +[    1.180386] mt7530 mdio-bus:1f lan0 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] 
 +[    1.189913] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] 
 +[    1.199429] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] 
 +[    1.208919] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] 
 +[    1.217793] mt7530 mdio-bus:1f: configuring for fixed/2500base-x link mode 
 +[    1.224947] DSA: tree 0 setup 
 +[    1.225193] mt7530 mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx 
 +[    1.235511] UBI: auto-attach mtd5 
 +[    1.238846] ubi0: attaching mtd5 
 +[    1.369869] ubi0: scanning is finished 
 +[    1.377959] ubi0: attached mtd5 (name "ubi", size 50 MiB) 
 +[    1.383360] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +[    1.390227] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +[    1.397004] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +[    1.403953] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 
 +[    1.409949] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 
 +[    1.417160] ubi0: max/mean erase counter: 102/62, WL threshold: 4096, image sequence number: 1571737675 
 +[    1.426538] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 19 
 +[    1.435749] ubi0: background thread "ubi_bgt0d" started, PID 936 
 +[    1.442333] block ubiblock0_1: created from ubi0:1(rootfs) 
 +[    1.447833] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem 
 +[    1.455187] input: gpio-keys as /devices/platform/gpio-keys/input/input0 
 +[    1.462062] hctosys: unable to open rtc device (rtc0) 
 +[    1.470365] VFS: Mounted root (squashfs filesystem) readonly on device 253:0. 
 +[    1.478962] devtmpfs: mounted 
 +[    1.482126] Freeing unused kernel memory: 448K 
 +[    1.493528] Run /sbin/init as init process 
 +INIT: version 2.99 booting 
 +create r/w /etc folder 
 +create r/w /var folder 
 +run /usr/etc/rcS (project/etc.rcS) 
 +Starting udev 
 +[    3.294937] udevd[988]: starting version 3.2.10 
 +[    3.344518] udevd[989]: starting eudev-3.2.10 
 +sysctl: cannot stat /proc/sys/net/ipv4/ip_conntrack_max: error code 2 
 +hwclock: can't open '/dev/misc/rtc': No such file or directory 
 +Fri Mar  9 12:34:56 UTC 2018 
 +hwclock: can't open '/dev/misc/rtc': No such file or directory 
 +chown: /mydlink: Read-only file system 
 +Failed to set owner -root- for -/mydlink-. 
 +chmod: /mydlink: Read-only file system 
 +Failed to set mode -1400- for -/mydlink-. 
 +cat: read error: Is a directory 
 +cat: read error: Is a directory 
 +cat: read error: Is a directory 
 +Starting mount /var/storage: main: do ubi_boot 
 +do_check_ubi_mount: /var/storage non-mounted 
 +**(mkdir -p /var/storage)** 
 +do_ubi_mkdir: create folder /va[    4.762140] ubi2: attaching mtd10 
 +r/storage ok 
 +**(ubiattach /dev/ubi_ctrl -m10 -d2)** 
 +[    4.791975] ubi2: scanning is finished 
 +[    4.800695] ubi2: attached mtd10 (name "Storage", size 10 MiB) 
 +[    4.806544] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +[    4.813409] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +[    4.820185] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +[    4.827134] ubi2: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 
 +[    4.833041] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 
 +[    4.840251] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 7827181 
 +[    4.849108] ubi2: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 19 
 +[    4.858236] ubi2: background thread "ubi_bgt2d" started, PID 1509 
 +UBI device number 2, total 80 LEBs (10158080 byt[    4.867564] UBIFS (ubi2:0): Mounting in unauthenticated mode 
 +es, 9.6 MiB), av[    4.874296] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1511 
 +ailable 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) 
 +do_ubi_attach: ubi_attach -m10 -d2, ok 
 +**(mount -t ubifs ubi2_0 /var/storage)** 
 +[    4.902034] UBIFS (ubi2:0): recovery needed 
 +[    4.948646] UBIFS (ubi2:0): recovery completed 
 +[    4.953166] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "storage" 
 +[    4.960647] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
 +[    4.970558] UBIFS (ubi2:0): FS size: 5967872 bytes (5 MiB, 47 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) 
 +[    4.980634] UBIFS (ubi2:0): reserved for root: 281876 bytes (275 KiB) 
 +[    4.987069] UBIFS (ubi2:0): media format: w5/r0 (latest is w5/r0), UUID 7C5C2863-F17C-474B-ADD3-5A0DAD4120F4, small LPT model 
 +do_ubi_mount: mount -t ubifs ubi2_0 /var/storage, ok 
 +done 
 +Starting untar webui-dlink: done 
 +Starting paccess: read_psec2datfile: done! 
 +done 
 +Starting csman: [csmsal_open]feed_csiddata (/tmp/csman/pre1.dat:5291) 
 +[csmsal_open]feed_csiddata (/tmp/csman/pre4.dat:538) 
 +[csmsal_open]feed_csiddata (/tmp/csman/pre7.dat:466) 
 +hookcs_load[182]: section_tag cmark:0x07 secid:0x07 magic:0x2B24 ts:0x0000000E imglen:0x00005802 imgchk:0x7CB9 tagchk:0xF90A 
 +[hookcs_load] C Area img Icksum() OK!(7CB9)(7CB9)(5802) 
 +hookcs_load[182]: section_tag cmark:0x07 secid:0x07 magic:0x2B24 ts:0x0000000F imglen:0x00005809 imgchk:0xD342 tagchk:0xA279 
 +[hookcs_load] C Area img Icksum() OK!(D342)(D342)(5809) 
 +C section 2 is up to date, load C section 2... 
 +[csmsal_open]feed_csiddata csection 
 +[csm_svr_init]csmsal open("/tmp/csman"), fd=171 
 +done 
 +Starting syslogd/klogd: done 
 +fs.protected_hardlinks = 1 
 +fs.protected_symlinks = 1 
 +mount: mounting none on /sys/kernel/debug failed: Resource busy 
 +Same FW, do nothing 
 +Starting commander: Tue Jul 11 03:26:40 UTC 2023 
 +Ether WAN NUM = 1 
 +WAN = XX:XX:XX:XX:XX:CC 
 +LAN = XX:XX:XX:XX:XX:CD 
 +WLAN0 = XX:XX:XX:XX:XX:CE 
 +WLAN1 = XX:XX:XX:XX:XX:CF 
 +WLAN2 = XX:XX:XX:XX:XX:D0 
 +WLAN3 = XX:XX:XX:XX:XX:D1 
 +WLAN4 = XX:XX:XX:XX:XX:D2 
 +WLAN5 = XX:XX:XX:XX:XX:D3 
 +WLAN6 = XX:XX:XX:XX:XX:D4 
 +WLAN7 = XX:XX:XX:XX:XX:D5 
 +BEID STATUS  : 0 , STATUS OK! 
 +[vlan] vlan for M30 - v1.1.9 
 +[vlan] vlan Start 
 +[vlan] Complete Cmd 
 +WAN = XX:XX:XX:XX:XX:CC 
 +LAN = XX:XX:XX:XX:XX:CD 
 +WLAN0 = XX:XX:XX:XX:XX:CE 
 +WLAN1 = XX:XX:XX:XX:XX:CF 
 +WLAN2 = XX:XX:XX:XX:XX:D0 
 +WLAN3 = XX:XX:XX:XX:XX:D1 
 +WLAN4 = XX:XX:XX:XX:XX:D2 
 +WLAN5 = XX:XX:XX:XX:XX:D3 
 +WLAN6 = XX:XX:XX:XX:XX:D4 
 +WLAN7 = XX:XX:XX:XX:XX:D5 
 +BEID STATUS  : 0 , STATUS OK! 
 +[vlan] Interface br0 Have Down 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +[vlan] Interface brx0 Have Down 
 +[vlan] Brx Interface brx0 Down 
 +bridge brx0 doesn't exist; can't delete it 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +[vlan] Interface brx1 Have Down 
 +[vlan] Brx Interface brx1 Down 
 +bridge brx1 doesn't exist; can't delete it 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +[vlan] Interface brx2 Have Down 
 +[vlan] Brx Interface brx2 Down 
 +bridge brx2 doesn't exist; can't delete it 
 +[vlan] triple play = 0 
 +[vlan] wanNum = 1, lanNum = 4, virturalwanNum = 0 
 +[vlan] wanIndex = 0, lanIndex = 1, virtualwanIndex = 5 
 +[vlan] wan port map: 4 
 +[[   11.512952] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode 
 +vlan] i = 0 posi[   11.521431] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx 
 +tion = 0 type = 1 portIndex = 4 portLogic = 4 portPhyId = 99 
 +[vlan] i = 0 wanPosition = 0 wanIndex = 99 vwBindWanIndex = -1 
 +[vlan] i = 0 wanMac = xxxxxxxxxxcc 
 +[vlan] i = 0 portMac = 000000000000 
 +[vlan] i = 0 wanInterface = eth1 
 +[vlan] i = 0 portInterface = eth1 
 +[vlan] lan port map: 0 1 2 3 -1 
 +[vlan] i = 1 position = 1 type = 2 portIndex = 0 portLogic = 0 portPhyId = 0 
 +[vlan] i = 1 lanIndex = 0 
 +[vlan] i = 1 lanMac = xxxxxxxxxxcd 
 +[vlan] i = 1 portMac = 000000000000 
 +[vlan] i = 1 portInterface = eth0 
 +[vlan] i = 1 lanInterface = 
 +[vlan] i = 2 position = 2 type = 2 [   11.581369] br0: port 1(lan0) entered blocking state 
 +portIndex = 1 po[   11.587644] br0: port 1(lan0) entered disabled state 
 +rtLogic = 1 port[   11.594145] device lan0 entered promiscuous mode 
 +PhyId = 1 
 +[vlan] i = 2 lanIndex = 1 
 +[vlan] i = 2 lanMac = ca787deba0cd 
 +[vl[   11.605861] br0: port 2(lan1) entered blocking state 
 +an] i = 2 portMa[   11.611889] br0: port 2(lan1) entered disabled state 
 +c = 000000000000[   11.618374] device lan1 entered promiscuous mode 
 + 
 +[vlan] i = 2 portInterface = eth0 
 +[vlan] i = 2 lanInterface = 
 +[vlan] i =[   11.630031] br0: port 3(lan2) entered blocking state 
 + 3 position = 3 [   11.636122] br0: port 3(lan2) entered disabled state 
 +type = 2 portInd[   11.642611] device lan2 entered promiscuous mode 
 +ex = 2 portLogic = 2 portPhyId = 2 
 +[vlan] i = 3 lanIndex = 2 
 +[vlan] i = 3 la[   11.654127] br0: port 4(lan3) entered blocking state 
 +nMac = ce787deba[   11.660368] br0: port 4(lan3) entered disabled state 
 +0cd 
 +[vlan] i =[   11.666857] device lan3 entered promiscuous mode 
 + 3 portMac = 000000000000 
 +[vlan] i = 3 portInterface = eth0 
 +[vlan] i = 3 lanInterface = 
 +[vlan] i = 4 position = 4 type = 2 portIndex = 3 portLogic = 3 portPhyId = 3 
 +[vlan] i = 4 lanIndex = 3 
 +[vlan][   11.689424] device eth0 entered promiscuous mode 
 + i = 4 lanMac = [   11.695735] mt7530 mdio-bus:1f lan0: configuring for phy/gmii link mode 
 +c2787deba0cd 
 +[[   11.704078] 8021q: adding VLAN 0 to HW filter on device lan0 
 +vlan] i = 4 portMac = 000000000000 
 +[vlan] i = 4 portInterface = eth0 
 +[vlan] i = 4 lanInterface = 
 +[vlan] i = 1 lanInterface = lan0 
 +[vlan] i = 2 lanInter[   11.723239] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode 
 +face = lan1 
 +[v[   11.731572] 8021q: adding VLAN 0 to HW filter on device lan1 
 +lan] i = 3 lanInterface = lan2 
 +[vlan] i = 4 lanInterface = lan3 
 +[vlan] Vlan First Run 
 +[vlan] Interface eth0 Have Up 
 +set hello timer failed: Result not r[   11.751352] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode 
 +epresentable 
 +[[   11.759132] 8021q: adding VLAN 0 to HW filter on device lan2 
 +vlan] Br Add Lan Interface: lan0 
 +[vlan] Br Add Lan Interface: lan1 
 +[vlan] Br Add Lan Interface: lan2 
 +[vlan] Br Add Lan Interface: lan3 
 +[vlan] Interface [   11.779028] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode 
 +eth0 Have Up 
 +[[   11.786649] 8021q: adding VLAN 0 to HW filter on device lan3 
 +vlan] Interface lan0 Have Up 
 +[vlan] Lan Interface lan0 Up 
 +[vlan] Interface lan1 Have Up 
 +[vlan] Lan Interface lan1 Up 
 +[vlan] Interface lan2 Have Up 
 +[vlan] Lan Interface lan2 Up 
 +[vlan] Interface lan3 Have Up 
 +[vlan] Lan Interface lan3 Up 
 +[vlan] Interface br0 Have Up 
 +[vlan] Br Interface br0 Up 
 +[   11.834069] MediaTek MT7981 PHY mdio-bus:00: TX-VCM SW cal result: 0x3 
 +[   11.841451] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:00] driver [MediaTek MT7981 PHY] 
 +[   11.850058] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/gmii link mode 
 +[vlan] Interface eth1 Have Up 
 +[vlan] Wan Interface eth1 Up 
 +[vlan] vlan End 
 +NETWORK Initialization finished. Result: 0 
 +init watchdog 
 +init vlan 
 +init lan 
 +Init Lan 
 +init stp 
 +init ondemand 
 +init multiwan 
 +Initialize MultiWAN 
 +wantype = 0, wantype index = 99, wan mode = 1, route enable = 1 
 +fo enable = 0, fo stay enable = 0, fo trigger = 0, fo time = 0, fo sequence = 0 
 +init multi_ondemand 
 +init spap 
 +init ddns 
 +init snmp 
 +SNMP Enterprise Number = 12823 
 +SNMP Enterprise Name = 
 +SNMP Enterprise OID = 1.3.6.1.4.1.12823 
 +SNMP Version: 5.8 
 +init time 
 +sh: line 1: snmpd-action: command not found 
 +Get time from RTC(ds3232) 
 +sh: line 1: /sys/class/i2c-adapter/i2c-1/new_device: No such file or directory 
 +init user 
 +hwclock: can't open '/dev/misc/rtc': No such file or directory 
 +init dhcpsrv 
 +device br0 already exists; can't create bridge with the same name 
 +IP        = 192.168.200.001 
 +Mask      = 255.255.255.000 (ffffff00) - aka /24 
 +IP range start = 192.168.200.1 
 +IP range end   = 192.168.200.254 
 +DHCP Server IP pool start = 192.168.200.100 
 +DHCP Server IP pool end   = 192.168.200.249 
 +sip : 1, eip : 254 
 +ptr_ip_start : 100 , ptr_ip_end : 249 
 +DHCP Server IP pool OKOK!! 
 +BusyBox v1.27.2 () multi-call binary. 
 + 
 +Usage: rm [-irf] FILE... 
 +BusyBox v1.27.2 () multi-call binary. 
 + 
 +Usage: rm [-irf] FILE... 
 +dnsmasq config start 
 +dnsmasq config end 
 +Start Dnsmasq DHCP at init 
 +init dnsrelay 
 +init routing 
 +init route_protocol 
 +init nat 
 +init keepalive 
 +init syslog_interval_timer 
 +init schedule 
 +init ftp_alg 
 +init rtsp_alg 
 +start the RTSP ALG modules 
 +rmmod: can't unload module 'nf_nat_rtsp': No such file or directory 
 +rmmod: can't unload module 'nf_conntrack_rtsp': No such file or directory 
 +[   16.252722] nf_conntrack_rtsp v0.7 loading 
 +==NAT Stop wan999 ALL== 
 +NAT nat-draft stop rul[   16.263232] nf_nat_rtsp v0.7 loading 
 +e start 
 +Flush ip route cache 
 +handle_rtsp_alg: load RTSP ALG modules 
 + init qos 
 +init reboot 
 +init reset_btn 
 +init sshd 
 +Add the DROP rules for outgoing packets 
 +init sip_alg 
 +init https 
 +init wireless_mode 
 +module 1 INIT AP ROUTER MODE 
 +Module One AP ROUTER MODE 
 +module 2 INIT AP ROUTER MODE 
 +Module Two AP ROUTER MODE 
 +spi_exception_deinit start 
 +dnsmasq config start 
 +spi end 
 +clear /usr/bin/spi spi_exception_deinit 
 +mmi_nat_stop 
 +mmi_nat_start 
 +NAT nat-draft stop rule end 
 +==NAT Start wan999 ALL== 
 +NAT nat-draft stop rule start 
 +Flush ip route cache 
 +spi_exception_deinit start 
 +dnsmasq config end 
 +init wlanap 
 +can not find cisd(8000F500) on Psetion 
 +can not find cisd(8000F501) on Psetion 
 +spi end 
 +clear /usr/bin/spi spi_exception_deinit 
 +init wpa 
 +init wlanapcli_profile 
 +mmi_nat_stop 
 +Initial WLANAPCLI_PROFILE 
 +init iom 
 +mmi_nat_start 
 +NAT nat-draft stop rule end 
 +NAT nat-draft start rule start 
 +sh: line 1: event_managed: command not found 
 +init wan_led 
 +init status_led 
 +init igmp 
 +All Log Alert options from Firewall are disable. 
 +init mupnpd 
 +init recent 
 +init bonjour 
 +nat-draft stop_ip_forward start 
 +nat-draft stop_ip_forward end 
 +mwlb start 
 +mwlb end 
 +admin start 
 +admin end 
 +virtual computer start 
 +virtual computer end 
 +wanalias start 
 +wanalias end 
 +portfwd start 
 +portfwd end 
 +Single DMZ start 
 +init dnscrypt_proxy 
 +init aplan 
 +Start init_aplan... 
 +init pptp 
 +init pptpserv 
 +init l2tp 
 +[   16.652465] mtk_soc_eth 15100000.ethernet eth0: TX vlan offload cannot be enabled when dsa is attached. 
 + 
 +init gre 
 +init ipsec 
 +init x509 
 +init scep 
 +init vrrp 
 +init ntpsrv 
 +init ipv6 
 +init v6filter 
 +init ddnsv6 
 +init grouping 
 +init recieve_alter_mode 
 +init guestzone 
 +init mesh 
 +nat_info.wan_index == 999 
 +mac-control start 
 +mac-control end 
 +init mydlink 
 +init WPS 
 +init ClientInfo 
 +init dlink_fota 
 +init dlink_speedtest 
 +init_speedtest[42]: STORAGE_PATH: /var/storage/speedtest 
 +init eventX_monitor 
 +discard_ping start 
 +discard_ping end 
 +read_csid2rawfile: done! 
 +inblkwpkts start 
 +read_csid2rawfile: done! 
 +inblkwpkts end 
 +adjust_mss start 
 + size=16384 num=64 uir_thread_count=80 
 + select timeout=10 0 
 +adjust_mss end 
 +Add temporary fwd_BT rules (check_fwd_recent: 0) 
 +Remove temporary fwd_BT rules 
 +done 
 +fwd-recent start 
 +fwd-recent end 
 + Create regular thread: watchdog 
 + Create regular thread: time 
 + Create regular thread: eventX_monitor 
 +WiFi Module One Operation Mode is changed 
 +WiFi Module Two Operation Mode is changed 
 +WiFi Operation Mode is Changed and Apply Wirelessmode Alter from Commander 
 +Disable WAN bridges to LAN 
 +NAT alg start 
 +NAT alg end 
 +device eth1 is not a port of br0 
 +Configuring packages on first boot.... 
 + (This may take several minutes. Please do not power off the machine.) 
 +pkt-filter start 
 +pkt-filter end 
 +pkt-filterv6 start 
 +pkt-filterv6 end 
 +Sorry, rule does not exist. 
 +Module One AP ROUTER MODE 
 +Module Two AP ROUTER MODE 
 +[   17.269382] watchdog: watchdog0: watchdog did not stop! 
 +l7appblk start 
 +l7appblk end 
 +## Error: "AMIT_BOOT_VERSION" not defined 
 +url-block start 
 +fwd_block_url_file_extension 
 +url-block end 
 +## Error: "AMIT_BOOT_BRANCH" not defined 
 +url-block start 
 +fwd_block_url 
 +url-block end 
 +nat-draft start_ip_forward start 
 +sh /var/nat/ip_forward.clr 
 +dnsmasq config start 
 +[   17.397475] mtk_soc_eth 15100000.ethernet eth0: TX vlan offload cannot be enabled when dsa is attached. 
 +## Error: "AMIT_BOOT_BUILDTIME" not defined 
 +nat-draft start_ip_forward end 
 +stealth-mode start 
 +dnsmasq config end 
 +stealth-mode end 
 +spi_exception_deinit start 
 +spi end 
 +spi_exception_init start 
 +spi end 
 +pre_spi_mode start 
 +spi end 
 +security_v6 start 
 +security_v6 end 
 +Conntrack -F start 
 +Wait 2 seconds 
 +wlan_phase_two_config 
 +killall: rt2860apd: no process killed 
 +Wireless 8021X Stop 
 +killall: mosquitto: no process killed 
 +killall: EasyMeshDaemon: no process killed 
 +killall: emhandler: no process killed 
 +killall: emLooping: no process killed 
 +killall: emDiscovery: no process killed 
 +killall: mapd: no process killed 
 +killall: p1905_managerd: no process killed 
 +killall: wapp: no process killed 
 +update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) 
 +INIT: Entering runlevel: 5up link 
 +Configuring network interfaces... RTNETLINK answers: File exists 
 +Disable WLAN interface. 
 +WLAN Two interface down! 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +interface rax0 does not exist! 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +interface rax1 does not exist! 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +interface rax2 does not exist! 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +WLAN One interface down! 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +interface ra0 does not exist! 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +interface ra1 does not exist! 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +interface ra2 does not exist! 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +rmmod: can't unload module 'mt_whnat': No such file or directory 
 +killall: fwdd: no process killed 
 +rmmod: can't unload module 'mtfwd': No such file or directory 
 +rmmod: can't unload module 'mt_wifi_ap': No such file or directory 
 +rmmod: can't unload module 'mt7915_mt_wifi_ap': No such file or directory 
 +killall: ACSDaemon: no process killed 
 +Enable WLAN interface. 
 +assigned dat_path:/etc/wireless/l1profile.dat 
 +dat_path:/etc/wireless/l1profile.dat 
 +assigned dat_path:/etc/wireless/mt7981.dbdc.b0.dat 
 +assigned csid_index:
 +dat_path:/etc/wireless/mt7981.dbdc.b0.dat 
 +assigned dat_path:/etc/wireless/mt7981.dbdc.b1.dat 
 +assigned csid_index:
 +dat_path:/etc/wireless/mt7981.dbdc.b1.dat 
 +[   19.638518] conninfra@(mtk_conninfra_drv_init:644) Before platform_driver_register 
 +[   19.646209] Get Index(0-TOP_MISC_BASE) phy_addr(0x11d10000) vir_addr=(0xffffffc010c7b000) size=(0x1000) 
 +[   19.655606] Get Index(1-TOPRGU_BASE) phy_addr(0x1001c000) vir_addr=(0xffffffc010c7f000) size=(0x1000) 
 +[   19.664818] Get Index(2-GPIO_BASE) phy_addr(0x11d00000) vir_addr=(0xffffffc010cc6000) size=(0x1000) 
 +[   19.673859] Get Index(3-IOCFG_TR_BASE) phy_addr(0x11f00000) vir_addr=(0xffffffc010cc8000) size=(0x1000) 
 +[   19.683242] Get Index(4-IOCFG_TL_BASE) phy_addr(0x11f10000) vir_addr=(0xffffffc010cca000) size=(0x1000) 
 +[   19.692630] Get Index(5-INFRACFG_AO_BASE) phy_addr(0x10003000) vir_addr=(0xffffffc010ccf000) size=(0x1000) 
 +[   19.702274] Get Index(6-CONN_INFRA_CFG_BASE) phy_addr(0x18001000) vir_addr=(0xffffffc010cd1000) size=(0x1000) 
 +[   19.712181] Get Index(7-CONN_INFRA_SYSRAM_BASE) phy_addr(0x18050000) vir_addr=(0xffffffc010cd7000) size=(0x1000) 
 +[   19.722345] Get Index(8-CONN_INFRA_CLKGEN_ON_TOP_BASE) phy_addr(0x18009000) vir_addr=(0xffffffc010cd9000) size=(0x1000) 
 +[   19.733119] Get Index(9-CONN_HOST_CSR_TOP_BASE) phy_addr(0x18060000) vir_addr=(0xffffffc010cdb000) size=(0x1000) 
 +[   19.743289] Get Index(10-CONN_INFRA_BUS_CR_BASE) phy_addr(0x1800e000) vir_addr=(0xffffffc010cdd000) size=(0x1000) 
 +[   19.753545] Get Index(11-CONN_INFRA_RGU_BASE) phy_addr(0x18000000) vir_addr=(0xffffffc010cef000) size=(0x1000) 
 +[   19.763539] Get Index(12-CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18005000) vir_addr=(0xffffffc010cf1000) size=(0x1000) 
 +[   19.773976] Get Index(13-INST2_CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18085000) vir_addr=(0xffffffc010cff000) size=(0x1000) 
 +[   19.784923] Get Index(14-CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18004000) vir_addr=(0xffffffc010d01000) size=(0x1000) 
 +[   19.795352] Get Index(15-INST2_CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18084000) vir_addr=(0xffffffc010d03000) size=(0x1000) 
 +[   19.806298] Get Index(16-CONN_SEMAPHORE_BASE) phy_addr(0x18070000) vir_addr=(0xffffffc010d40000) size=(0x10000) 
 +[   19.816380] Get Index(17-CONN_AFE_CTL_BASE) phy_addr(0x18003000) vir_addr=(0xffffffc010d05000) size=(0x1000) 
 +[   19.826195] Get Index(18-CONN_AFE_CTL_2ND_BASE) phy_addr(0x18083000) vir_addr=(0xffffffc010d07000) size=(0x1000) 
 +[   19.836364] Get Index(19-WF_TOP_SLPPROT_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010d60000) size=(0x10000) 
 +[   19.846706] Get Index(20-WF_TOP_CFG_BASE) phy_addr(0x184b0000) vir_addr=(0xffffffc010d09000) size=(0x1000) 
 +[   19.856353] Get Index(21-WF_MCU_CONFIG_LS_BASE) phy_addr(0x184f0000) vir_addr=(0xffffffc010d0f000) size=(0x1000) 
 +[   19.866521] Get Index(22-WF_MCU_BUS_CR_BASE) phy_addr(0x18400000) vir_addr=(0xffffffc010d11000) size=(0x1000) 
 +[   19.876431] Get Index(23-WF_MCUSYS_INFRA_BUS_FULL_U_DEBUG_CTRL_AO_BASE) phy_addr(0x18500000) vir_addr=(0xffffffc010d13000) size=(0x1000) 
 +[   19.888679] Get Index(24-WF_TOP_CFG_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010d90000) size=(0x10000) 
 +[   19.898672] conninfra@(consys_plt_hw_init:162) adie_cfg_type = 1, one_adie_dbdc = 1 
 +[   19.906327] [emi_mng_init] gConEmiPhyBase = [0x47c80000] size = [0x100000] fw size = [0x100000] ops=[00000000b69c29d6] 
 +[   19.917119] conninfra@(mtk_conninfra_drv_init:650) After platform_driver_register 
 +[   19.924999] ConnInfra Dev: init (0) 
 +[   19.930789] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000) 
 +[   19.940679] conninfra@(connsys_d_die_cfg:365) D-die efuse: 0x00000000 
 +[   19.948143] conninfra@(_connsys_a_die_cfg_7976:918) adie_idx[0], A-die CHIP ID = 0x7976, HW Version = 0x8a10 
 +[   19.958968] conninfra@(consys_spi_write_nolock:501) addr=0x0a00, val=0xffffffff 
 +[   19.967275] conninfra@(consys_spi_write_nolock:501) addr=0x04ac, val=0x0000001c 
 +[   19.975583] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002 
 +[   19.984897] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x00000000 
 +[   19.994211] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x43a60000 
 +[   20.007555] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008800b9, 0x00000000] 
 +[   20.019073] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002 
 +[   20.028391] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a6003a 
 +[   20.037706] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63a7003a 
 +[   20.051049] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008800b9, 0x00000000] 
 +[   20.062564] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002 
 +[   20.071881] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a7003a 
 +[   20.081200] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63ac003a 
 +[   20.094546] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008800b9, 0x00000000] 
 +[   20.106062] conninfra@(consys_spi_write_nolock:501) addr=0x0038, val=0x4a563b00 
 +[   20.114367] conninfra@(consys_spi_write_nolock:501) addr=0x065c, val=0x1d59080f 
 +[   20.122673] conninfra@(consys_spi_write_nolock:501) addr=0x0664, val=0x34c00fe0 
 +[   20.130987] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x88888005 
 +[   20.140252] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x00000005 
 +[   20.148494] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000) 
 +[   20.158314] conninfra@(_consys_hw_conninfra_wakeup:469) conninfra_wakeup refcnt=[0]->[1] wakeup!! 
 +[   20.167186] conninfra@(_consys_hw_conninfra_sleep:489) conninfra_sleep refcnt=[1]->[0] sleep!! 
 +[   20.175792] conninfra@(opfunc_power_on_internal:236) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[0] CONNINFRA=[1] 
 +[   20.211039] mediatek_soc_hnat 15100000.hnat: wan = eth1 
 +[   20.216333] mediatek_soc_hnat 15100000.hnat: lan = lan 
 +[   20.221501] mediatek_soc_hnat 15100000.hnat: ppd = eth0 
 +[   20.226748] mediatek_soc_hnat 15100000.hnat: gmac num = 2 
 +[   20.232153] mediatek_soc_hnat 15100000.hnat: ppe num = 1 
 +[   20.238030] mediatek_soc_hnat 15100000.hnat: PPE0 entry number = 8192 
 +[   20.244792] mediatek_soc_hnat 15100000.hnat: PPE0 hwnat start 
 +[   20.250583] hnat roaming work enable 
 +conntrack v1.4.6 (conntrack-tools): connection tracking table has been emptied. 
 +Conntrack -F end 
 +NAT nat-draft start rule end 
 +[   21.312027] mt_wifi: module license 'Proprietary' taints kernel. 
 +[   21.318043] Disabling lock debugging due to kernel taint 
 +[   21.357182] conninfra@(conninfra_pwr_on:120) [conninfra_pwr_on] drv=[3] 
 +[   21.364736] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000) 
 +[   21.382594] Adie Type: 0x7976 
 +[   21.382597] SKU Type: 3000 
 +[   21.386514] conninfra@(opfunc_power_on_internal:236) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[1] CONNINFRA=[1] 
 +[   21.400574] WiFi@C12L1,get_dbg_setting_by_profile() 4309: debug level setting=INDEX0_debug_level not found!! 
 +[   21.410419] WiFi@C12L1,get_dbg_setting_by_profile() 4332: debug option setting=INDEX0_debug_option not found!! 
 +[   21.420479] mt_rbus 0000:00:00.0: runtime IRQ mapping not provided by arch 
 +[   21.441201] mt7981_init()--> 
 +[   21.444106] Use the default iPAiLNA bin image! 
 +[   21.448600] <--mt7981_init() 
 +[   21.451512] RtmpRaDevCtrlInit:3469 => wlan_if_prefix:ra 
 +[   21.456757] RtmpRaDevCtrlInit:3469 => wlan_if_prefix:rax 
 +[   21.462070] RtmpRaDevCtrlInit(): MCS_LUT not used becasue MacTb size(288) > 128! 
 +[   21.469556] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX1 
 +[   21.476876] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX2 
 +[   21.484198] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX3 
 +[   21.491513] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX4 
 +[   21.498833] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX5 
 +[   21.506149] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX6 
 +[   21.513470] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX7 
 +[   21.520787] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX8 
 +[   21.528106] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX9 
 +[   21.535408] WiFi@C12L2,match_index_by_chipname() 584: Not find slot id, back to old rule. 
 +[   21.543688] msta_ifname not found 
 +[   21.644125] warp_module_init(): module init and register callback for warp 
 +[   21.651034] create warp_ctrl ok!!! 
 +[   21.654480] wed_get_slot_map(): assign slot_id:0 for entry: 0! 
 +[   21.660326] wed_get_slot_map(): assign slot_id:1 for entry: 1! 
 +[   21.693814] mtk_warp_proxy: module uses symbols from proprietary module mt_wifi, inheriting taint. 
 +WLAN One interface up! 
 +[   21.709840] WiFi@C01L2,RTMP_COM_IoctlHandle() 1510: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT 
 +[   21.718143] msta_ifname not found 
 +[   21.721987] client_get_axi_slot_id(): wrong BUS_TYPE 
 +[   21.726955] warp_cap_support(): chip_id=7981 is in WHNAT support list 
 +[   21.733398] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 00000000fb0f3ac1 
 +[   21.742090] client_hif_specific_get(): hw->base_phy_addr 0x18000000!! 
 +[   21.748527] client_chip_specific_get(): 0x7981 chip id 0x7981!! 
 +[   21.754530] warp_entry_get_by_pdev(): return entry[0] 
 +[   21.759752] warp_msg_register():warp,pid,2789,id,0,wed_idx,
 +[   21.765420] warp_dev0 15010000.wed: Using 32bit DMA for streaming map 
 +[   21.771858] warp_dev0 15010000.wed: Using 32bit DMA for coherent map 
 +[   21.778234] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_addr=0xffffffc010d1d000 
 +[   21.787404] wed_ring_init(): wed tx ring init result = 0 
 +[   21.793164] wed_ring_init(): wed rx ring init result = 0 
 +[   21.802749] GetEntryFromFreeList: allocated new pool 
 +[   21.809392] GetEntryFromFreeList: allocated new pool 
 +[   21.816029] GetEntryFromFreeList: allocated new pool 
 +[   21.822622] GetEntryFromFreeList: allocated new pool 
 +[   21.829602] create wed ok!!! 
 +[   21.832500] wdma_init(): wdma(0) base_addr=0xffffffc010d3d800, base_phy_addr=0x15104800 
 +[   21.841232] warp_woif_bus_init_hw(): bus:00000000e5d6dc63, txring: 20, pa: 0x0000000050d1e000, 0x0000000050d1e000, 24, 28, 3c 
 +[   21.852556] warp_woif_bus_init_hw(): bus:00000000e5d6dc63, rxring: 50, pa: 0x0000000050928000, 0x0000000050928000, 54, 58, 6c 
 +[   21.863915] get_region_info(): wed_idx = 0, base_addr = 0x000000004735ef7c, size = 0x40000, res.start = 0x47d80000, shared:0 
 +[   21.875143] get_region_info(): wed_idx = 0, base_addr = 0x00000000c1f4b613, size = 0x8000, res.start = 0x151e0000, shared:0 
 +[   21.886316] get_region_info(): wed_idx = 0, base_addr = 0x000000005173b800, size = 0x240000, res.start = 0x47dc0000, shared:1 
 +[   21.897633] get_region_info(): wed_idx = 0, base_addr = 0x00000000aa643093, size = 0x1000, res.start = 0x15194000, shared:0 
 +[   21.908758] warp_fwdl_mcu_mode(): mcu mode, need fwdl 
 +[   21.951226] ########## WO Firmware ########## 
 +[   21.955619] Chip ID: 0x0000 
 +[   21.958415] ECO version:0 
 +[   21.961033] Version: DEV_000000 
 +[   21.964180] Build date: 20220901175230 
 +[   21.967923] Total region:3 
 +[   21.970629] ################################# 
 +[   21.974979] Parsing tailer region 0 
 +[   21.978466]  Target address: 0x151e0000 
 +[   21.982295]  Download size: 20768 
 +[   21.985635] Parsing tailer region 1 
 +[   21.989111]  Target address: 0x47d80000 
 +[   21.992944]  Download size: 86224 
 +[   21.996330] Parsing tailer region 2 
 +[   21.999823]  Target address: 0x47dc0000 
 +[   22.003654]  Download size: 2319824 
 +[   22.009272] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu 
 +[   22.029816] warp_fwdl_ready_check_mcu_mode(): wocpu is ready 
 +[   22.035495] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE 
 +[   22.041417] wo_proc_init done  000000000e15c160 
 +[   22.045950] wo_exep_proc_init done  000000000e15c160 
 +[   22.050946] wo_exception_init(0): exp log= 0x0000000019924472, phy_addr= 0x0000000050b50000 size= 32768 
 +[   22.139091] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS0 PhyMode=78 
 +[   22.145704] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS1 PhyMode=78 
 +[   22.152317] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS2 PhyMode=78 
 +[   22.158929] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS3 PhyMode=177 
 +[   22.165627] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS4 PhyMode=177 
 +[   22.172324] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS5 PhyMode=177 
 +[   22.179325] WiFi@C23L3,auto_ch_select_set_cfg() 3481: BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3 
 +[   22.188888] WiFi@C23L3,auto_ch_select_set_cfg() 3481: BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3 
 +[   22.248055] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=0, Desired MFPC=1 
 +[   22.255449] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=1, Desired MFPC=1 
 +[   22.262844] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=2, Desired MFPC=1 
 +[   22.270237] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=3, Desired MFPC=1 
 +[   22.277633] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=4, Desired MFPC=1 
 +[   22.285025] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=5, Desired MFPC=1 
 +[   22.294417] WiFi@C12L1,RTMPSetProfileParameters() 8614: ra0, QoSMgmtCapa=0 
 +[   22.301287] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 
 +[   22.308417] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 
 +[   22.315552] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 
 +[   22.322684] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 
 +[   22.329815] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 
 +[   22.342799] WiFi@C12L1,rtmp_read_ap_client_from_file() 1641: APCLI[0] ApCliMuMimoDlEnable = 0 
 +[   22.351318] WiFi@C12L1,rtmp_read_ap_client_from_file() 1641: APCLI[1] ApCliMuMimoDlEnable = 0 
 +[   22.360010] WiFi@C12L1,rtmp_read_ap_client_from_file() 1660: APCLI[0] ApCliMuMimoUlEnable = 0 
 +[   22.368527] WiFi@C12L1,rtmp_read_ap_client_from_file() 1660: APCLI[1] ApCliMuMimoUlEnable = 0 
 +[   22.378960] WiFi@C03L1,AndesSendCmdMsg() 753: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 
 +[   22.390169] WiFi@C03L2,AndesSendCmdMsg() 763: Command type = ed, Extension command type = 48 
 +[   22.398607] WiFi@C03L1,AndesSendCmdMsg() 753: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 
 +[   22.409814] WiFi@C03L2,AndesSendCmdMsg() 763: Command type = ed, Extension command type = 48 
 +[   22.489965] wdma_dma_ctrl(): WDMA_GLO_CFG=50404e70, txrx = 0 
 +[   22.500612] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e70, txrx = 0 
 +[   22.514506] warp_tx_ring_init_hw(): configure ring 0 setting 
 +[   22.520190] warp_tx_ring_init_hw(): wed:00000000f3a1a5b5 wifi:000000006ab548bc: 24420=526e0000,24424=2048,24428=0 
 +[   22.530450] warp_tx_ring_init_hw(): configure ring 1 setting 
 +[   22.536107] warp_tx_ring_init_hw(): wed:00000000f3a1a5b5 wifi:000000006ab548bc: 24430=54360000,24434=2048,24438=0 
 +[   22.546482] set_rrocfg,
 +[   22.571876] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e74, txrx = 3 
 +[   22.577534] using E1 ROM patch 
 +[   22.580575] using E1 RAM 
 +[   22.583113] current sync CR = 0x1 
 +[   22.586425]  Built date: 20220901174831a 
 +[   22.590354]  Platform: ALPS 
 +[   22.593137]  HW/SW version: 0x8a108a10 
 +[   22.596887]  Patch version: 0xffffffff 
 +[   22.604622] current sync CR = 0x1 
 +[   22.607940]  Chip ID: 0x14 
 +[   22.610647]  Eco version: 0x00 
 +[   22.613698]  Region number: 0x0b 
 +[   22.616915]  Format version: 0x02 
 +[   22.620230]  Format flag: 0x01 
 +[   22.623282]  Ram version: ____000000 
 +[   22.626861]  Built date: 20220901174855 
 +[   22.630698]  Common crc: 0x62c52fee 
 +[   22.634184]  Release info: header tag = 0, total length = 64 
 +[   22.639836]  tag 1, padding length = 1, tag length = 59 
 +[   22.645057]  payload: t-neptune-main-mt7915-1953-MT7981_MP2111_IMP-20220901174750 
 +[   22.672811]  Chip ID: 0x00 
 +[   22.675528]  Eco version: 0x00 
 +[   22.678583]  Region number: 0x03 
 +[   22.681808]  Format version: 0x02 
 +[   22.685111]  Format flag: 0x01 
 +[   22.688162]  Ram version: DEV_000000 
 +[   22.691742]  Built date: 20220901175135 
 +[   22.695581]  Common crc: 0xdc1c7789 
 +[   22.699064]  Release info: header tag = 0, total length = 0 
 +[   22.784925] current sync CR = 0x7 
 +[   22.788266] efuse_probe: efuse = deaddead 
 +[   22.795779] WiFi@C02L1,is_cal_free_ic() 830: [a-die version:1] 
 +[   25.076031] mac_len = 6 
 +[   25.078603] WiFi@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now! 
 +[   25.086159] WiFi@C01L1,AntCfgInit() 3620: Not support for HIF_MT yet! 
 +[   25.105402] ch_switch_monitor_state_machine_init:: enter 
 +[   25.110725] ch_switch_monitor_cfg_reset:: enter 
 +[   25.115270] ch_switch_monitor_cfg_reset:: enter 
 +[   25.120083] WiFi@C17L1,tx_pwr_comp_init() 641: NotSupportYet! 
 +[   25.125908] WiFi@C12L1,SCS_init() 879: INIT SCSEnable [0]= 1 
 +[   25.131603] WiFi@C12L1,SCS_init() 886: INIT SCSEnable [1]= 0 
 +[   25.137379] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   25.142904] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   25.148393] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited! 
 +[   25.175230] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 3 
 +[   25.181000] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   25.186523] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   25.192024] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! 
 +[   25.201939] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13443: DAT config band(0) cck_timeout Fail! 
 +[   25.210636] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! 
 +[   25.220545] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13454: DAT config band(0) ofdm_timeout Fail! 
 +[   25.229321] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! 
 +[   25.239226] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13465: DAT config band(0) ofdma_timeout Fail! 
 +[   25.248089] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! 
 +[   25.257993] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13443: DAT config band(1) cck_timeout Fail! 
 +[   25.266687] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! 
 +[   25.276596] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13454: DAT config band(1) ofdm_timeout Fail! 
 +[   25.285375] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! 
 +[   25.295280] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13465: DAT config band(1) ofdma_timeout Fail! 
 +[   25.306710] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] 
 +[   25.317252] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] 
 +[   25.443423] :(op = 1) 
 +[   25.450534] WiFi@C00L1,FastPathCheckMIC() 1009: (ret = 0)(op:1) 
 +[   25.456480] WiFi@C00L2,red_tail_drop_init() 82: red_tail_drop_init: available token:8192, whnat_en:
 +[   25.465636] WiFi@C00L1,MtCmdCr4RedSet() 913: MtCmdCr4RedSet: (ret = 0) 
 +[   25.472162] WiFi@C00L1,SendRedCmd() 1048: SendRedCmd:(ret = 1) 
 +[   25.478178] WiFi@C01L2,RTMP_COM_IoctlHandle() 1487:  -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP 
 +[   25.486186] WiFi@C01L3,wifi_sys_open() 855: wdev idx = 0 
 +[   25.491755] WiFi@C18L3,BuildChannelList() 484: 
 +[   25.496313] WiFi@C00L3,BuildChannelList() 512: BandIdx = 0, PhyMode = 78, ChListNum = 13: 
 +[   25.504498] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.510876] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.517329] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.523705] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.530163] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.536520] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.542965] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.549315] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.555754] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.562103] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.568547] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.574899] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.581335] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.587685] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.594124] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.600473] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.606911] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.613259] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.619700] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.626050] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.632490] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.638838] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.645278] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.651627] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.658064] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 
 +[   25.664413] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 
 +[   25.670849] WiFi@C23L1,DfsBuildChannelList() 3663: [RDM]: wdev is not 5G. 
 +[   25.677652] WiFi@C23L3,RadarStateCheck() 243: Zero Wait State: 0 
 +[   25.683718] WiFi@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(0), ht_bw(1), extcha(3), vht_bw(0), cen_ch_2(0), PhyMode=78! 
 +[   25.695208] phy_freq_adjust : no prim_ch value for adjust! 
 +[   25.700692] WiFi@C23L1,operate_loader_phy() 397: phy_freq_adjust failed!WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xa4/0x150 [mt_wifi] 
 +[   25.714118] wdev_attr_update(): wdevId0 = XX:XX:XX:XX:XX:ce 
 +[   25.719739] WiFi@C12L1,wifi_sys_open() 902: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0 
 +[   25.728738] WiFi@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=0 
 +[   25.734592] WiFi@C23L1,HcGetBandByChannel() 1229: No hdev parking on channel:0, just return a default band_idx 0! 
 +[   25.744886] WiFi@C02L2,AsicRadioOnOffCtrl() 2338: DbdcIdx=0 RadioOn 
 +[   25.751824] WiFi@C00L2,ApAutoChannelAtBootUp() 333: -----------------> 
 +[   25.758477] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   25.763994] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   25.769641] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x108/0x430 [mt_wifi])!! 
 +[   25.781980] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   26.153806] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   26.525802] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   26.645895] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:ApUpdateCapabilityAndErpIe+0x334/0x544 [mt_wifi])!! 
 +[   26.897820] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   27.269816] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   27.641821] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   28.013802] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   28.385824] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   28.757807] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   29.129812] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   29.501805] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   29.873806] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   30.245797] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   30.617985] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x25c/0x430 [mt_wifi])!! 
 +[   30.630279] WiFi@C23L3,SelectClearChannelBusyTime() 1880: ==================================================================== 
 +[   30.641667] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel   1 : Busy Time =   7032, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.653048] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel   2 : Busy Time =  17555, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.664432] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel   3 : Busy Time =  11268, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.675811] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel   4 : Busy Time =   2314, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.687195] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel   5 : Busy Time =   6421, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.698573] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel   6 : Busy Time =   9584, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.709965] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel   7 : Busy Time =  16968, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.721355] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel   8 : Busy Time =  21978, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.732740] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel   9 : Busy Time =  13803, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.744119] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel  10 : Busy Time =  14806, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.755500] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel  11 : Busy Time =   6740, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.766879] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel  12 : Busy Time =  16610, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.778262] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel  13 : Busy Time =  16966, Skip Channel = FALSE, BwCap = TRUE 
 +[   30.789640] WiFi@C23L3,SelectClearChannelBusyTime() 1889: ==================================================================== 
 +[   30.801027] WiFi@C23L3,SelectClearChannelBusyTime() 2124: Rule 3 Channel Busy time value : Select Primary Channel 4 
 +[   30.811452] WiFi@C23L3,SelectClearChannelBusyTime() 2126: Rule 3 Channel Busy time value : Min Channel Busy = 2314 
 +[   30.821796] WiFi@C23L3,SelectClearChannelBusyTime() 2128: Rule 3 Channel Busy time value : BW = 20 
 +[   30.825824] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xac/0xd4 [mt_wifi])!! 
 +[   30.830758] WiFi@C23L3,SelectClearChannelBusyTime() 2166: [SelectClearChannelBusyTime] - band0 END 
 +[   30.851878] WiFi@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(4), ht_bw(1), extcha(1), vht_bw(0), cen_ch_2(0), PhyMode=78! 
 +[   30.863356] WiFi@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(1), prim_ch(4), cen_ch_1(6), cen_ch_2(0),ext_cha(1)! 
 +[   30.874835] WiFi@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(1), prim_ch(4), cen_ch_1(6), cen_ch_2(0)! 
 +[   30.885745] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   31.035671] WiFi@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 
 +[   31.046651] WiFi@C23L1,DfsBuildChannelList() 3663: [RDM]: wdev is not 5G. 
 +[   31.053441] WiFi@C23L3,zero_wait_dfs_switch_ch() 924: outband ch 0, ch_stat 0 
 +[   31.060777] WiFi@C08L2,APStartUpForMbss() 983: ===>(caller:ap_inf_open+0x144/0x4f0 [mt_wifi]), mbss_idx:0, CfgMode:0 
 +[   31.071334] WiFi@C15L2,APPMFInit() 130: [PMF] apidx=0, MFPC=1, MFPR=0, SHA256=0 
 +[   31.078664] WiFi@C18L3,BuildChannelList() 484: 
 +[   31.083429] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] 
 +[   31.090985] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   31.096448] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   31.263303] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   31.573620] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   31.579072] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   31.746233] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   32.085614] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   32.091065] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   32.257966] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   32.597614] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   32.603065] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   32.771160] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   33.109610] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   33.115050] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   33.281959] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   33.621613] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   33.627050] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   33.793943] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   34.133632] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   34.139070] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   34.305593] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   34.645611] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   34.651047] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   34.817584] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   35.157622] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   35.163059] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   35.329716] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   35.669609] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   35.675046] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   35.841705] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   36.045804] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xac/0xd4 [mt_wifi])!! 
 +[   36.181626] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   36.187065] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   36.353581] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   36.693613] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   36.699052] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   36.866112] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   37.205509] WiFi@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(4), ht_bw(1), extcha(1), vht_bw(0), cen_ch_2(0), PhyMode=78! 
 +[   37.216993] WiFi@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(1), prim_ch(4), cen_ch_1(6), cen_ch_2(0),ext_cha(1)! 
 +[   37.228471] WiFi@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(1), prim_ch(4), cen_ch_1(6), cen_ch_2(0)! 
 +[   37.239387] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   37.389351] WiFi@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 
 +[   37.400333] WiFi@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(4), ht_bw(0), extcha(0), vht_bw(0), cen_ch_2(0), PhyMode=78! 
 +[   37.411812] WiFi@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(0), prim_ch(4), cen_ch_1(4), cen_ch_2(0),ext_cha(0)! 
 +[   37.423292] WiFi@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(0), prim_ch(4), cen_ch_1(4), cen_ch_2(0)! 
 +[   37.434194] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   37.575505] WiFi@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 
 +[   37.586709] WiFi@C08L2,ap_link_up() 7142: (caller:wdev_do_linkup+0x20/0x3c [mt_wifi]), wdev(0) 
 +[   37.595358] WiFi@C01L3,wifi_sys_linkup() 1231: wdev idx = 0 
 +[   37.672108] WiFi@C00L3,wtc_acquire_groupkey_wcid() 81:  Found a non-occupied wtbl_idx:287 for WDEV_TYPE:
 +[   37.672108]  LinkToOmacIdx = 0, LinkToWdevType = 1 
 +[   37.686465] WiFi@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0 
 +[   37.699386] WiFi@C08L3,UpdateBeaconHandler() 1911: BCN_UPDATE_INIT, OmacIdx = 0 (ra0) 
 +[   37.707224] WiFi@C08L3,UpdateBeaconHandler() 1924:   Band0 BcnInitedRnd = 115 
 +[   37.714583] WiFi@C00L1,TxCCKStreamCtrl() 20455: set wrong parameters 
 +[   37.733801] PrintSrCmd: 
 +[   37.733801] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 
 +[   37.733801] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 
 +[   37.747858] PrintSrCmd: 
 +[   37.747858] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 
 +[   37.747858] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   37.761848] PrintSrCmd: 
 +[   37.761848] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 
 +[   37.761848] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 
 +[   37.775857] PrintSrCmd: 
 +[   37.775857] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 
 +[   37.775857] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   37.789945] PrintSrCmd: 
 +[   37.789945] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 
 +[   37.789945] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   37.804034] PrintSrCmd: 
 +[   37.804034] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 
 +[   37.804034] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   37.818181] WiFi@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 
 +[   37.829155] WiFi@C03L3,MtCmdTxPwrShowInfo() 13745: ucTxPowerInfoCatg: 2, BandIdx: 0 
 +[   37.836916] WiFi@C03L3,MtCmdTxPwrShowInfo() 13774: (ret = 0) 
 +[   37.842586] [mtf_txpower_all_rate_info] band_idx:0 pwr:26 ChBand:2G ePAGain:0 
 +[   37.849760] mtk_ppe_dev_register_hook : ineterface ra0 register (1) 
 +[   38.657496] BcnCheck start after 4000 ms (ra0) 
 +[   38.859701] br0: port 5(ra0) entered blocking state 
 +[   38.864600] br0: port 5(ra0) entered disabled state 
 +[   38.869654] device ra0 entered promiscuous mode 
 +[   38.874262] br0: port 5(ra0) entered blocking state 
 +[   38.879143] br0: port 5(ra0) entered forwarding state 
 +[   38.884250] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready 
 +[wlanap] is2G_enable= 1, is5G_enable= 1 
 +[wlanap] if_wlan_2G= ra0, if_wlan_5G= rax0 
 +Set multicast_to_unicast kernel option to 1 on interface ra0 
 +/usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument 
 +ra0 Channel Value: 4 
 +WLAN Two interface up! 
 +[   38.954896] 7981@C08L2,mbss_virtual_if_open() 133:  ===> rax0 
 +[   38.960778] 7981@C01L2,RTMP_COM_IoctlHandle() 1510: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT 
 +[   38.968871] 7981@C01L2,RTMP_COM_IoctlHandle() 1487:  -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP 
 +[   38.976878] WiFi@C01L3,wifi_sys_open() 855: wdev idx = 3 
 +[   38.982449] 7981@C18L3,BuildChannelList() 484: 
 +[   38.986993] 7981@C00L3,BuildChannelList() 512: BandIdx = 1, PhyMode = 177, ChListNum = 4: 
 +[   38.995204] 7981@C23L3,DfsBuildChannelList() 3708: Done 
 +[   39.000444] 7981@C23L3,RadarStateCheck() 243: Zero Wait State: 0 
 +[   39.006449] 7981@C23L3,RadarStateCheck() 290:  RD_NORMAL_MODE 
 +[   39.013238] 7981@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(0), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177! 
 +[   39.024792] phy_freq_adjust : no prim_ch value for adjust! 
 +[   39.030274] 7981@C23L1,operate_loader_phy() 397: phy_freq_adjust failed!WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xa4/0x150 [mt_wifi] 
 +[   39.043691] wdev_attr_update(): wdevId3 = XX:XX:XX:XX:XX:d1 
 +[   39.049287] WiFi@C12L1,wifi_sys_open() 902: wifi_sys_open():band1 group_idx[3]=4, bw_grp=16 omac=0 
 +[   39.058298] 7981@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=3 
 +[   39.065165] 7981@C23L1,HcGetBandByChannel() 1229: No hdev parking on channel:0, just return a default band_idx 0! 
 +[   39.075511] 7981@C02L2,AsicRadioOnOffCtrl() 2338: DbdcIdx=0 RadioOn 
 +[   39.082419] 7981@C00L2,ApAutoChannelAtBootUp() 333: -----------------> 
 +[   39.089077] 7981@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   39.094605] 7981@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   39.100025] 7981@C23L3,AutoChSelBuildChannelListFor56G() 2726: ChListNum56G = 4 
 +[   39.107339] 7981@C23L3,AutoChSelBuildChannelListFor56G() 2942: ACSChListNum = 4 
 +[   39.114845] 7981@C08L1,UpdateBeaconHandler() 1890: wdev(3) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x108/0x430 [mt_wifi])!! 
 +[   39.127201] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   39.817820] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   40.321813] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   40.821810] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   41.265494] BcnCheck start after 1500 ms (ra0) 
 +[   41.270276] 7981@C08L1,UpdateBeaconHandler() 1890: wdev(3) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xac/0xd4 [mt_wifi])!! 
 +[   41.317986] 7981@C08L1,UpdateBeaconHandler() 1890: wdev(3) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x25c/0x430 [mt_wifi])!! 
 +[   41.330263] 7981@C23L3,SelectClearChannelBusyTime() 1880: ==================================================================== 
 +[   41.341650] 7981@C23L3,SelectClearChannelBusyTime() 1883: Channel  36 : Busy Time =    338, Skip Channel = FALSE, BwCap = TRUE 
 +[   41.353037] 7981@C23L3,SelectClearChannelBusyTime() 1883: Channel  40 : Busy Time =    291, Skip Channel = FALSE, BwCap = TRUE 
 +[   41.364425] 7981@C23L3,SelectClearChannelBusyTime() 1883: Channel  44 : Busy Time =   3192, Skip Channel = FALSE, BwCap = TRUE 
 +[   41.375813] 7981@C23L3,SelectClearChannelBusyTime() 1883: Channel  48 : Busy Time =    225, Skip Channel = FALSE, BwCap = TRUE 
 +[   41.387197] 7981@C23L3,SelectClearChannelBusyTime() 1889: ==================================================================== 
 +[   41.398587] 7981@C23L3,SelectClearChannelBusyTime() 2124: Rule 3 Channel Busy time value : Select Primary Channel 48 
 +[   41.409106] 7981@C23L3,SelectClearChannelBusyTime() 2126: Rule 3 Channel Busy time value : Min Channel Busy = 3192 
 +[   41.419450] 7981@C23L3,SelectClearChannelBusyTime() 2128: Rule 3 Channel Busy time value : BW = 80 
 +[   41.428403] 7981@C23L3,SelectClearChannelBusyTime() 2166: [SelectClearChannelBusyTime] - band1 END 
 +[   41.437364] 7981@C23L3,RadarStateCheck() 243: Zero Wait State: 0 
 +[   41.443369] 7981@C23L3,RadarStateCheck() 290:  RD_NORMAL_MODE 
 +[   41.450161] 7981@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(48), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177! 
 +[   41.461815] 7981@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(2), prim_ch(48), cen_ch_1(42), cen_ch_2(0),ext_cha(3)! 
 +[   41.473466] 7981@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(2), prim_ch(48), cen_ch_1(42), cen_ch_2(0)! 
 +[   41.484580] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   41.742881] 7981@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 
 +[   41.753887] 7981@C23L3,DfsBuildChannelList() 3708: Done 
 +[   41.759161] 7981@C23L3,zero_wait_dfs_switch_ch() 924: outband ch 0, ch_stat 0 
 +[   41.766330] 7981@C23L3,zero_wait_dfs_switch_ch() 931: bDedicatedZeroWaitDefault == 0 
 +[   41.774318] 7981@C08L2,APStartUpForMbss() 983: ===>(caller:ap_inf_open+0x144/0x4f0 [mt_wifi]), mbss_idx:3, CfgMode:0 
 +[   41.784943] 7981@C15L2,APPMFInit() 130: [PMF] apidx=3, MFPC=1, MFPR=0, SHA256=0 
 +[   41.792296] 7981@C18L3,BuildChannelList() 484: 
 +[   41.797061] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] 
 +[   41.804777] WiFi@C08L2,ap_link_up() 7142: (caller:wdev_do_linkup+0x20/0x3c [mt_wifi]), wdev(3) 
 +[   41.813412] 7981@C01L3,wifi_sys_linkup() 1231: wdev idx = 3 
 +[   41.890312] 7981@C00L3,wtc_acquire_groupkey_wcid() 81:  Found a non-occupied wtbl_idx:286 for WDEV_TYPE:
 +[   41.890312]  LinkToOmacIdx = 0, LinkToWdevType = 1 
 +[   41.904674] 7981@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=3 
 +[   41.917515] 7981@C08L3,UpdateBeaconHandler() 1911: BCN_UPDATE_INIT, OmacIdx = 0 (rax0) 
 +[   41.925495] 7981@C08L3,UpdateBeaconHandler() 1924:   Band1 BcnInitedRnd = 156 
 +[   41.946748] PrintSrCmd: 
 +[   41.946748] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   41.946748] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 
 +[   41.960758] PrintSrCmd: 
 +[   41.960758] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   41.960758] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   41.974747] PrintSrCmd: 
 +[   41.974747] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   41.974747] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 
 +[   41.988761] PrintSrCmd: 
 +[   41.988761] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   41.988761] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   42.002844] PrintSrCmd: 
 +[   42.002844] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   42.002844] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   42.016932] PrintSrCmd: 
 +[   42.016932] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   42.016932] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   42.031055] 7981@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 
 +[   42.042034] 7981@C03L3,MtCmdTxPwrShowInfo() 13745: ucTxPowerInfoCatg: 2, BandIdx: 1 
 +[   42.049797] 7981@C03L3,MtCmdTxPwrShowInfo() 13774: (ret = 0) 
 +[   42.055471] [mtf_txpower_all_rate_info] band_idx:1 pwr:30 ChBand:5G ePAGain:0 
 +[   42.062648] mtk_ppe_dev_register_hook : ineterface rax0 register (2) 
 +[   43.072729] br0: port 6(rax0) entered blocking state 
 +[   43.077705] br0: port 6(rax0) entered disabled state 
 +[   43.082833] device rax0 entered promiscuous mode 
 +[   43.087526] br0: port 6(rax0) entered blocking state 
 +[   43.092491] br0: port 6(rax0) entered forwarding state 
 +[   43.114856] 7981@C08L2,mbss_virtual_if_open() 133:  ===> rax1 
 +[   43.120623] 7981@C01L2,RTMP_COM_IoctlHandle() 1510: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT 
 +[   43.128731] 7981@C01L2,RTMP_COM_IoctlHandle() 1487:  -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP 
 +[   43.136736] WiFi@C01L3,wifi_sys_open() 855: wdev idx = 4 
 +[   43.142294] 7981@C18L3,BuildChannelList() 484: 
 +[   43.146858] 7981@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(48), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177! 
 +[   43.158501] 7981@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(2), prim_ch(48), cen_ch_1(42), cen_ch_2(0),ext_cha(3)! 
 +[   43.170150] 7981@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(2), prim_ch(48), cen_ch_1(42), cen_ch_2(0)! 
 +[   43.181225] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal 
 +[   43.201511] 7981@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 
 +[   43.212709] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xa4/0x150 [mt_wifi] 
 +[   43.220737] wdev_attr_update(): wdevId4 = XX:XX:XX:XX:XX:d2 
 +[   43.226332] WiFi@C12L1,wifi_sys_open() 902: wifi_sys_open():band1 group_idx[4]=25, bw_grp=16 omac=17 
 +[   43.235495] 7981@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=4 
 +[   43.242373] 7981@C02L2,AsicRadioOnOffCtrl() 2338: DbdcIdx=1 RadioOn 
 +[   43.249229] 7981@C00L2,ApAutoChannelAtBootUp() 333: -----------------> 
 +[   43.255882] 7981@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   43.261396] 7981@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) 
 +[   43.266803] 7981@C00L1,ApAutoChannelAtBootUp() 490: zero-wait DFS is not enabled 
 +[   43.274196] 7981@C08L1,ap_run_at_boot() 622:  ACS is disable !! 
 +[   43.281006] 7981@C08L2,APStartUpForMbss() 983: ===>(caller:ap_inf_open+0x144/0x4f0 [mt_wifi]), mbss_idx:4, CfgMode:0 
 +[   43.291573] 7981@C15L2,APPMFInit() 130: [PMF] apidx=4, MFPC=1, MFPR=0, SHA256=0 
 +[   43.358109] 7981@C18L3,BuildChannelList() 484: 
 +[   43.362871] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] 
 +[   43.370529] WiFi@C08L2,ap_link_up() 7142: (caller:wdev_do_linkup+0x20/0x3c [mt_wifi]), wdev(4) 
 +[   43.379161] 7981@C01L3,wifi_sys_linkup() 1231: wdev idx = 4 
 +[   43.455978] 7981@C00L3,wtc_acquire_groupkey_wcid() 81:  Found a non-occupied wtbl_idx:285 for WDEV_TYPE:
 +[   43.455978]  LinkToOmacIdx = 11, LinkToWdevType = 1 
 +[   43.470439] 7981@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=4 
 +[   43.484027] 7981@C08L3,UpdateBeaconHandler() 1911: BCN_UPDATE_INIT, OmacIdx = 11 (rax1) 
 +[   43.506070] PrintSrCmd: 
 +[   43.506070] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   43.506070] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 
 +[   43.520075] PrintSrCmd: 
 +[   43.520075] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   43.520075] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   43.534069] PrintSrCmd: 
 +[   43.534069] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   43.534069] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 
 +[   43.548066] PrintSrCmd: 
 +[   43.548066] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   43.548066] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   43.562148] PrintSrCmd: 
 +[   43.562148] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   43.562148] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   43.576226] PrintSrCmd: 
 +[   43.576226] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 
 +[   43.576226] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 
 +[   43.590320] 7981@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 
 +[   43.601290] 7981@C03L3,MtCmdTxPwrShowInfo() 13745: ucTxPowerInfoCatg: 2, BandIdx: 1 
 +[   43.609042] 7981@C03L3,MtCmdTxPwrShowInfo() 13774: (ret = 0) 
 +[   43.609154] [mtf_txpower_all_rate_info] band_idx:1 pwr:30 ChBand:5G ePAGain:0 
 +[   43.614709] mtk_ppe_dev_register_hook : ineterface rax1 register (3) 
 +Set multicast_to_unicast kernel option to 1 on interface ra0 
 +/usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument 
 +Set multicast_to_unicast kernel option to 1 on interface rax0 
 +/usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument 
 +[   43.901502] BcnCheck start after 3100 ms (ra0) 
 +[   44.632586] br0: port 7(rax1) entered blocking state 
 +[   44.637567] br0: port 7(rax1) entered disabled state 
 +[   44.642698] device rax1 entered promiscuous mode 
 +[   44.647382] br0: port 7(rax1) entered blocking state 
 +[   44.652348] br0: port 7(rax1) entered forwarding state 
 +[wlanap] is2G_enable= 1, is5G_enable= 1 
 +[wlanap] if_wlan_2G= ra0, if_wlan_5G= rax0 
 +Set multicast_to_unicast kernel option to 1 on interface ra0 
 +/usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument 
 +Set multicast_to_unicast kernel option to 1 on interface rax0 
 +/usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument 
 +Set multicast_to_unicast kernel option to 1 on interface rax1 
 +/usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument 
 +rax0 Channel Value: 48 
 +nf_handle_macctl_wlanap 2776 iwpriv ra0 set AccessPolicy=0 
 +nf_handle_macctl_wlanap 2793 iwpriv rax0 set AccessPolicy=0 
 +nf_handle_macctl_wlanap 2793 iwpriv rax1 set AccessPolicy=0 
 +Run smp.sh & 
 +[   45.474968] 7981@C08L2,mbss_virtual_if_close() 170:  ===> rax1 
 +[   45.480814] 7981@C01L2,RTMP_COM_IoctlHandle() 1498:  -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN 
 +[   45.489227] WiFi@C08L2,ap_link_down() 7160: (caller:wdev_do_linkdown+0x20/0x34 [mt_wifi]), wdev(4) 
 +[   45.498482] 7981@C08L1,UpdateBeaconHandler() 1890: wdev(4) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!! 
 +[   45.509891] 7981@C01L3,wifi_sys_linkdown() 1363: wdev idx = 4 
 +[   45.515889] 7981@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=4 
 +[   45.525258] WiFi@C01L3,wifi_sys_close() 945: wdev idx = 4 
 +[   45.530984] 7981@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=4 
 +[   45.536939] 7981@C01L2,RTMP_COM_IoctlHandle() 1521: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT 
 +[   45.545209] extif_put_dev(rax1) 
 +[   45.548349] mtk_ppe_dev_unregister_hook : ineterface rax1 set null (3) 
 +[   45.556668] br0: port 7(rax1) entered disabled state 
 +[   45.567685] -->mtfwd_init(ver:2.0) 
 +[   45.567720] <-- 
 +[   46.505500] BcnCheck start after 600 ms (ra0) 
 +[   46.597587] nf_unregister_hooks() 
 +[fwdd][send_ctrl_msg]net link socket didn't created. 
 +[fwdd][send_ctrl_msg]net link socket didn't created. 
 +cat: can't open '/etc/map/1905d.cfg': No such file or directory 
 +[get_mesh_conf] mesh_dlink_get_mesh_role(), wireless_mode=[0], wireless_mode_n=[0] 
 +[vlan] vlan for M30 - v1.1.9 
 +[vlan] vlan Start 
 +[vlan] triple play = 0 
 +[vlan] wanNum = 1, lanNum = 4, virturalwanNum = 0 
 +[vlan] wanIndex = 0, lanIndex = 1, virtualwanIndex = 5 
 +[vlan] wan port map: 4 
 +[vlan] i = 0 position = 0 type = 1 portIndex = 4 portLogic = 4 portPhyId = 99 
 +[vlan] i = 0 wanPosition = 0 wanIndex = 99 vwBindWanIndex = -1 
 +[vlan] i = 0 wanMac = xxxxxxxxxxcc 
 +[vlan] i = 0 portMac = 000000000000 
 +[vlan] i = 0 wanInterface = eth1 
 +[vlan] i = 0 portInterface = eth1 
 +[vlan] lan port map: 0 1 2 3 -1 
 +[vlan] i = 1 position = 1 type = 2 portIndex = 0 portLogic = 0 portPhyId = 0 
 +[vlan] i = 1 lanIndex = 0 
 +[vlan] i = 1 lanMac = xxxxxxxxxxcd 
 +[vlan] i = 1 portMac = 000000000000 
 +[vlan] i = 1 portInterface = eth0 
 +[vlan] i = 1 lanInterface = 
 +[vlan] i = 2 position = 2 type = 2 portIndex = 1 portLogic = 1 portPhyId = 1 
 +[vlan] i = 2 lanIndex = 1 
 +[vlan] i = 2 lanMac = ca787deba0cd 
 +[vlan] i = 2 portMac = 000000000000 
 +[vlan] i = 2 portInterface = eth0 
 +[vlan] i = 2 lanInterface = 
 +[vlan] i = 3 position = 3 type = 2 portIndex = 2 portLogic = 2 portPhyId = 2 
 +[vlan] i = 3 lanIndex = 2 
 +[vlan] i = 3 lanMac = ce787deba0cd 
 +[vlan] i = 3 portMac = 000000000000 
 +[vlan] i = 3 portInterface = eth0 
 +[vlan] i = 3 lanInterface = 
 +[vlan] i = 4 position = 4 type = 2 portIndex = 3 portLogic = 3 portPhyId = 3 
 +[vlan] i = 4 lanIndex = 3 
 +[vlan] i = 4 lanMac = c2787deba0cd 
 +[vlan] i = 4 portMac = 000000000000 
 +[vlan] i = 4 portInterface = eth0 
 +[vlan] i = 4 lanInterface = 
 +[vlan] i = 1 lanInterface = lan0 
 +[vlan] i = 2 lanInterface = lan1 
 +[vlan] i = 3 lanInterface = lan2 
 +[vlan] i = 4 lanInterface = lan3 
 +[vlan] Port Map 11110000 
 +[vlan] Complete Cmd 
 +[vlan] Vlan Cmd Exit 
 +[vlan] vlan End 
 +[vlan] vlan for M30 - v1.1.9 
 +[vlan] vlan Start 
 +[vlan] triple play = 0 
 +[vlan] wanNum = 1, lanNum = 4, virturalwanNum = 0 
 +[vlan] wanIndex = 0, lanIndex = 1, virtualwanIndex = 5 
 +[vlan] wan port map: 4 
 +[vlan] i = 0 position = 0 type = 1 portIndex = 4 portLogic = 4 portPhyId = 99 
 +[vlan] i = 0 wanPosition = 0 wanIndex = 99 vwBindWanIndex = -1 
 +[vlan] i = 0 wanMac = xxxxxxxxxxcc 
 +[vlan] i = 0 portMac = 000000000000 
 +[vlan] i = 0 wanInterface = eth1 
 +[vlan] i = 0 portInterface = eth1 
 +[vlan] lan port map: 0 1 2 3 -1 
 +[vlan] i = 1 position = 1 type = 2 portIndex = 0 portLogic = 0 portPhyId = 0 
 +[vlan] i = 1 lanIndex = 0 
 +[vlan] i = 1 lanMac = xxxxxxxxxxcd 
 +[vlan] i = 1 portMac = 000000000000 
 +[vlan] i = 1 portInterface = eth0 
 +[vlan] i = 1 lanInterface = 
 +[vlan] i = 2 position = 2 type = 2 portIndex = 1 portLogic = 1 portPhyId = 1 
 +[vlan] i = 2 lanIndex = 1 
 +[vlan] i = 2 lanMac = ca787deba0cd 
 +[vlan] i = 2 portMac = 000000000000 
 +[vlan] i = 2 portInterface = eth0 
 +[vlan] i = 2 lanInterface = 
 +[vlan] i = 3 position = 3 type = 2 portIndex = 2 portLogic = 2 portPhyId = 2 
 +[vlan] i = 3 lanIndex = 2 
 +[vlan] i = 3 lanMac = ce787deba0cd 
 +[vlan] i = 3 portMac = 000000000000 
 +[vlan] i = 3 portInterface = eth0 
 +[vlan] i = 3 lanInterface = 
 +[vlan] i = 4 position = 4 type = 2 portIndex = 3 portLogic = 3 portPhyId = 3 
 +[vlan] i = 4 lanIndex = 3 
 +[vlan] i = 4 lanMac = c2787deba0cd 
 +[vlan] i = 4 portMac = 000000000000 
 +[vlan] i = 4 portInterface = eth0 
 +[vlan] i = 4 lanInterface = 
 +[vlan] i = 1 lanInterface = lan0 
 +[vlan] i = 2 lanInterface = lan1 
 +[vlan] i = 3 lanInterface = lan2 
 +[vlan] i = 4 lanInterface = lan3 
 +[vlan] Port Map 11110000 
 +[vlan] Complete Cmd 
 +[vlan] Vlan Cmd Exit 
 +[vlan] vlan End 
 +Start Spanning Tree Protocol 
 + 
 +v1.25 
 +Created SM Eventloop successfully 
 +M30-A0CD 
 +[MEMBER_SM] Loading Configuration : 
 +Filepath is: /tmp/emDaemon//easyMesh_LogStateFile.txt 
 +Filename with path is /tmp/emDaemon/dlinkEmeshMQTTlogFile.txt 
 +handle_nat: nat stop 
 +==NAT Stop wan999 ALL== 
 +NAT nat-draft stop rule start 
 +Flush ip route cache 
 +Add the DROP rules for outgoing packets 
 +spi_exception_deinit start 
 +spi end 
 +clear /usr/bin/spi spi_exception_deinit 
 +clear /var/nat/blkwan.wan99.clr 
 +clear /var/nat/blkwan_pkts.clr 
 +clear /var/nat/blkwan_ftp.clr 
 +mmi_nat_stop 
 +mmi_nat_start 
 +NAT nat-draft stop rule end 
 +Force to start schedule without consider the Time Sync status! 
 +Start Mini-UPNP !! 
 +[V] [start][1530]WirelessRouter Mode 
 +[   47.140133] hook is going to be disabled ! 
 +[   47.147885] hook is going to be enabled ! 
 +[   47.162889] HQoS is going to be disabled ! 
 +Start Mini-UPNP !! 
 +==NAT Stop wan999 mupnpd== 
 +NAT nat-draft stop rule start 
 +NAT nat-draft stop rule end 
 +==NAT Start wan999 mupnpd== 
 +NAT nat-draft stop rule start 
 +NAT nat-draft stop rule end 
 +NAT nat-draft start rule start 
 +nat-draft stop_ip_forward start 
 +func not 'ALL', return 
 +discard_ping start 
 +discard_ping end 
 +inblkwpkts start 
 +inblkwpkts end 
 +adjust_mss start 
 +adjust_mss end 
 +Add temporary fwd_BT rules (check_fwd_recent: 0) 
 +Remove temporary fwd_BT rules 
 +NAT alg start 
 +NAT alg end 
 +nat-draft start_ip_forward start 
 +func not 'ALL', return 
 +stealth-mode start 
 +stealth-mode end 
 +security_v6 start 
 +security_v6 end 
 +NAT nat-draft start rule end 
 +Error: Cannot delete qdisc with handle of zero. 
 +Error: Cannot delete qdisc with handle of zero. 
 +switch port=0 egress rate limit off 
 +switch port=1 egress rate limit off 
 +switch port=2 egress rate limit off 
 +switch port=3 egress rate limit off 
 +[   47.484354] HQoS is going to be disabled ! 
 +create dhcpd6.leases xxxxxxxxxxxxxxxx 
 +Error: Cannot delete qdisc with handle of zero. 
 +Error: Cannot delete qdisc with handle of zero. 
 +switch port=0 egress rate limit off 
 +switch port=1 egress rate limit off 
 +switch port=2 egress rate limit off 
 +switch port=3 egress rate limit off 
 +restart the SIP ALG modules 
 +RTNETLINK answers: Address not available 
 +RTNETLINK answers: Address not available 
 +## Lunching system normally completed! ## 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/07/27 14:51
  • by rolandomagico