Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:cudy:m1800 [2024/05/16 05:33] – First update maurerletoh:cudy:m1800 [2024/05/16 06:02] – [Tags] maurerle
Line 3: Line 3:
 The Cudy M1800 is a Mesh system from Cudy, having Wifi 6 support and two Gigabit LAN ports. The Cudy M1800 is a Mesh system from Cudy, having Wifi 6 support and two Gigabit LAN ports.
 It is typically sold in pairs of two or three. It is typically sold in pairs of two or three.
 +Sometimes, the selling name includes AX1800 like in "Cudy AX1800 Whole Home Mesh WiFi System M1800".
  
 While there also existed a v1 version which is already EOL (End-of-Life), the V2 will have support until somewhat 2027 according to Cudy's support page. While there also existed a v1 version which is already EOL (End-of-Life), the V2 will have support until somewhat 2027 according to Cudy's support page.
  
 {{media:cudy:m1800:m1800-exterior.jpg?200|Cudy M1800 Mesh system}} {{media:cudy:m1800:m1800-exterior.jpg?200|Cudy M1800 Mesh system}}
- 
-<WRAP BOX> 
-FIXME 
-===== Getting started with a new Device Page ===== 
-  - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.** 
-  - There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness. 
-  - When there are no more "fixme" tags left, delete this one too, along with the ''<nowiki><WRAP></nowiki>'' that encloses it. 
- 
-===== Keep the articles modular ===== 
-  * Please include only model specific information, omit bla,bla and put everything generic into separate articles 
-  * If you have no time to write certain stuff, link to [[docs:start]] 
-  * [[docs:guide-user:base-system:start]] should lead the way, do not explain this again 
-  * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]]. 
-</WRAP> 
  
 ===== Supported Versions ===== ===== Supported Versions =====
- 
-<WRAP BOX> 
-FIXME 
-  - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If the tables below show information for ''<nowiki>Cudy M1800 </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables below contain "Nothing found", it means that either 
-    - the dataentry page for Cudy M1800  is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-    - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter  : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
  
 <!-- ToH: { <!-- ToH: {
Line 39: Line 16:
   "paging": false,   "paging": false,
   "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],   "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],
-  "filterColumns": {"brand": "^Cudy$", "model": "^M1800$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^Cudy$", "model": "^M1800$"}
 } --> } -->
  
 /* If no unsupported functions known, comment out the following datatable or delete it. */ /* If no unsupported functions known, comment out the following datatable or delete it. */
 +/**
 <!-- ToH: { <!-- ToH: {
   "source": "json",   "source": "json",
Line 50: Line 28:
   "filterColumns": {"brand": "^Cudy$", "model": "^M1800$"}   "filterColumns": {"brand": "^Cudy$", "model": "^M1800$"}
 } --> } -->
 +**/
  
 ===== Experimental Versions ===== ===== Experimental Versions =====
Line 61: Line 40:
  
 //None at this time.// //None at this time.//
 +
 +
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
Line 68: Line 49:
   "paging": false,   "paging": false,
   "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"],   "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"],
-  "filterColumns": {"brand": "^Cudy$", "model": "^M1800$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^Cudy$", "model": "^M1800$"}
 } --> } -->
  
Line 96: Line 77:
  
  
--> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] 
  
-FIXME Please add the installation procedure here.+There are two known options: 
 + 
 +1) The Luci-based UI. 
 + 
 +2) Press and hold the reset button during power up. 
 +The router will request 'recovery.bin' from a TFTP server at 
 +192.168.1.88. 
 + 
 +Both options require a signed firmware binary. 
 +The openwrt image supplied by cudy is signed and can be used to 
 +install unsigned images. 
 + 
 +One can download the OpenWRT image at: 
 +http://www.cudytech.com/openwrt_software_download (https does not work on this page) 
 + 
 +There is only an OpenWRT image for the M1800 v2. 
 +If you have a device which has a Firmware-Version of 2.x - this is the v2 version of the M1800. 
 + 
 +If you have a device with a 1.x Firmware version, the openwrt images are not accepted and there is no path forward to install OpenWrt on these EOL devices yet. 
 + 
 +One can play around with the UI in the browser to get a feel using the Cudy emulator: https://support.cudy.com/emulator/M1800/ 
  
 ==== Flash Layout ==== ==== Flash Layout ====
-<WRAP BOX> 
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).// 
  
-Please check out the article [[docs:techref:flash.layout|Flash layout]]It contains examples and explanations that describe how to document the flash layout. +The following is taken from the M1800V2_GPIO.xlsx in M1800+V2.zip from http://www.cudytech.com/openwrt_software_download
-</WRAP>+
  
 +^ LED                |              | GPIO                      |             
 +^ SYS_BLED_LED  | F16  | JTCLK        | 16                        | Active Low  
 +^ SYS_RED_LED   | G18  | JTMS         | 15                        | Active Low  
 +^ LAN1_LED      | AA17 | ESW_P0_LED_0 | Port#0 PHY LED indicators | Active Low  
 +^ LAN2_LED      | Y16  | ESW_P1_LED_0 | Port#1 PHY LED indicators | Active Low  
 +^ LAN3_LED      | W15  | ESW_P2_LED_0 | Port#2 PHY LED indicators | Active Low  
 +^ LAN4_LED      | AA15 | ESW_P3_LED_0 | Port#3 PHY LED indicators | Active High 
 +^ WAN_LED       | Y15  | ESW_P4_LED_0 | Port#4 PHY LED indicators | Active Low  
 +^                    |              |                                       
 +^ Button        |      |              |                                       
 +^ WPS           | H1   | TXD3         | 7                         | Active Low  
 +^ RESET         | H3   | RXD3         | 8                         | Active Low  
 ==== OEM easy installation ==== ==== OEM easy installation ====
  
-<WRAP BOX> +First you need to download the signed Cudy OpenWRT firmware from here: http://www.cudytech.com/openwrt_software_download
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ +
-**//Remove / modify them if they do not apply to this particular device!//** +
- +
-This section deals with +
-  * How you install OpenWrt from a device freshly opened +
-  * The steps required such as reset to factory defaults if the device has already been configured+
  
-**Note:** Reset router to factory defaults if it has been previously configured. +  * Browse to ''<nowiki>http://192.168.10.1/cgi-bin/luci/admin/panel</nowiki>'' 
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' +  * Click on Firmware 
-  * Upload .bin file to router+  * Upload cudy openwrt bin file to router
   * Wait for it to reboot   * Wait for it to reboot
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. +  * SSH to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed.
-</WRAP>+
  
 ==== OEM installation using the TFTP method ==== ==== OEM installation using the TFTP method ====
  
-->  [[docs:guide-user:installation:generic.flashing.tftp]]+Download the recovery.bin for your device from this page: 
 +http://www.cudytech.com/openwrt_software_download 
 + 
 +  * Place the recovery.bin in the serving directory of your TFTP server 
 +  * set your IP to 192.168.1.88 
 +  * Press the "Reset" button of Cudy router and hold it. Before the Cudy 
 +router is powered on and before TFTP start to download the firmware, 
 +don't release the "Reset" button 
 +  * Power on the Cudy router. 
 +  * You can release the reset button only when the status LED flashes 
 +red and blue quickly, or when TFTP starts downloading firmware. 
 +  * When the status LED turns solid red, the upgrade is complete.
  
 === Specific values needed for tftp === === Specific values needed for tftp ===
  
-<WRAP BOX> 
  
-FIXME Enter values for "FILL-IN" below +^ Bootloader tftp server IPv4 address 192.168.1.88   | 
- +^ Firmware tftp image                  | Cudy OpenWRT image |
-^ Bootloader tftp server IPv4 address FILL-IN   | +
-^ Bootloader MAC address (special)     | FILL-IN   | +
-^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | +
-^ TFTP transfer window                 | FILL-IN seconds                                | +
-^ TFTP window start                    | approximately FILL-IN seconds after power on   | +
-^ TFTP client required IP address      | FILL-IN                                        | +
- +
-</WRAP>+
  
 ===== Upgrading OpenWrt ===== ===== Upgrading OpenWrt =====
Line 261: Line 266:
 filter  : Brand=Cudy filter  : Brand=Cudy
 filter  : Model=M1800 filter  : Model=M1800
-filter  : Versions= 
 ---- ----
  
Line 339: Line 343:
  
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>EXAMPLETAG}}+{{tag>mt7621 mt7915 2port 32nand 256ram 2port gigabitethernet gigabitethernet 802.11bgn 802.11ax 2core mips 2nic internalantenna}}
  • Last modified: 2024/12/18 14:51
  • by frollic