Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revisionBoth sides next revision | ||
| toh:compex:wpj72z [2016/02/25 10:01] – [Hardware info] dangh | toh:compex:wpj72z [2018/05/11 10:27] – Datatables added, cleanup tmomas | ||
|---|---|---|---|
| Line 3: | Line 3: | ||
| The device is supported in OpenWrt since Kamikaze 8.09. | The device is supported in OpenWrt since Kamikaze 8.09. | ||
| - | ===== Hardware info ===== | + | ===== Supported Versions |
| - | ^ Architecture | MIPS | | + | ---- datatable ---- |
| - | ^ Vendor | Atheros | | + | cols : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid |
| - | ^ Bootloader | CFE | | + | headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data |
| - | ^ System-On-Chip | AR7240 | | + | align : c, |
| - | ^ CPU Speed | 400 Mhz | | + | filter |
| - | ^ Flash size | 4 MB (up to 16 MB)| | + | ---- |
| - | ^ RAM | 32 MB (Max 64 MB) DDR SDRAM | | + | |
| - | ^ Wireless | 1 × MiniPCI slots | | + | |
| - | ^ Ethernet | 2 × 10/100 Base-TX | + | ===== Hardware Highlights ===== |
| - | ^ USB | 2 × USB 2.0 ports (optional) | | + | ---- datatable ---- |
| - | ^ Serial | yes | | + | cols : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, |
| - | ^ JTAG | yes | | + | header |
| + | align : c, | ||
| + | filter | ||
| + | ---- | ||
| ===== Installation ===== | ===== Installation ===== | ||
| + | ---- datatable ---- | ||
| + | cols : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url | ||
| + | headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock | ||
| + | align : l,c,c | ||
| + | filter | ||
| + | ---- | ||
| + | |||
| + | -> [[docs: | ||
| + | |||
| ==== Restore mode ==== | ==== Restore mode ==== | ||
| Line 45: | Line 58: | ||
| ==== Minimum Requirement ==== | ==== Minimum Requirement ==== | ||
| - | - Compex loader version 2.54 or above. | + | - Compex loader version 2.54 or above. |
| - | - OpenWrt will only be supported on WPJ72Z with 4MB NOR flash and above. | + | - OpenWrt will only be supported on WPJ72Z with 4MB NOR flash and above. |
| - | - Please ensure that the Ethernet connection is able to ping address = 192.168.168.1 | + | - Please ensure that the Ethernet connection is able to ping address = 192.168.168.1 |
| - | - If there is a USB NAND flash available on board, you would need to change the loader configuration. Please refer to “what to do if there is a onboard NAND Flash”. | + | - If there is a USB NAND flash available on board, you would need to change the loader configuration. Please refer to “what to do if there is a onboard NAND Flash”. |
| ==== Compiling OpenWrt suitable for use on WPJ72Z ==== | ==== Compiling OpenWrt suitable for use on WPJ72Z ==== | ||
| - | - Getting source codes< | + | - Getting source codes< |
| $ svn co -r 12448 https:// | $ svn co -r 12448 https:// | ||
| </ | </ | ||
| - | - Apply patches from the files mod-wpj72z.tgz (< | + | - Apply patches from the files mod-wpj72z.tgz (< |
| $ tar -zxvf mod-wpj72z.tgz | $ tar -zxvf mod-wpj72z.tgz | ||
| $ cp -a mod-wpj72z/ | $ cp -a mod-wpj72z/ | ||
| </ | </ | ||
| - | - Compile< | + | - Compile< |
| $ cd trunk | $ cd trunk | ||
| $ cp wpj72z.config .config | $ cp wpj72z.config .config | ||
| Line 66: | Line 79: | ||
| ==== Uploading the OpenWrt firmware to WPJ72Z running MyLoader v2.54.0717 ==== | ==== Uploading the OpenWrt firmware to WPJ72Z running MyLoader v2.54.0717 ==== | ||
| - | a. Via Compex Firmware | + | a. Via Compex Firmware |
| - | *Put the AP in Firmware Upgrade mode and upload the file. | + | * Put the AP in Firmware Upgrade mode and upload the file. |
| - | *This file is for WPJ72Z with 4MB or 8MB NOR flash. | + | * This file is for WPJ72Z with 4MB or 8MB NOR flash. |
| - | b. Via TFTP | + | b. Via TFTP |
| - | *Go to the firmware upgrade mode (by pressing and hold the Reset button and plug-in the power adapter). | + | * Go to the firmware upgrade mode (by pressing and hold the Reset button and plug-in the power adapter). |
| - | *Upload the OpenWrt image to the device (//$// **tftp -i 192.168.168.1 put openwrt-ar71xx-wpj72z.bin**) | + | * Upload the OpenWrt image to the device (//$// **tftp -i 192.168.168.1 put openwrt-ar71xx-wpj72z.bin**) |
| + | |||
| + | ===== Hardware info ===== | ||
| + | ^ Architecture | ||
| + | ^ Vendor | ||
| + | ^ Bootloader | ||
| + | ^ System-On-Chip | ||
| + | ^ CPU Speed | 400 Mhz | | ||
| + | ^ Flash size | 4 MB (up to 16 MB) | | ||
| + | ^ RAM | 32 MB (Max 64 MB) DDR SDRAM | | ||
| + | ^ Wireless | ||
| + | ^ Ethernet | ||
| + | ^ USB | 2 × USB 2.0 ports (optional) | ||
| + | ^ Serial | ||
| + | ^ JTAG | yes | | ||
| + | |||
| ===== Wireless ===== | ===== Wireless ===== | ||
| Line 82: | Line 111: | ||
| This page has been assembled from a number of different pages from the old wiki and the current wiki. Refer to them for more (possibly outdated) information. | This page has been assembled from a number of different pages from the old wiki and the current wiki. Refer to them for more (possibly outdated) information. | ||
| - | *< | + | * < |
| - | *< | + | * < |
| + | |||
| + | ===== Tags ===== | ||
| + | [[meta: | ||
| + | {{tag> | ||