Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
toh:compex:mmc543hv [2016/02/25 09:54] – [Hardware info] danghtoh:compex:mmc543hv [2024/02/12 08:58] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== Compex MMC543HV ====== ====== Compex MMC543HV ======
  
-The device is supported in OpenWrt since Kamikaze 8.09.+{{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}} 
 + 
 +===== Supported Versions ===== 
 +<!-- ToH: { 
 +  "source": "json", 
 +  "dom": "t", 
 +  "paging": false, 
 +  "rotate": true, 
 +  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "owrt_forum_topic_url", "deviceid"], 
 +  "filterColumns": {"model": "^MMC543HV$"} 
 +} --> 
 + 
 + 
 +===== Hardware Highlights ===== 
 +<!-- ToH: { 
 +  "source": "json", 
 +  "dom": "t", 
 +  "paging": false, 
 +  "rotate": true, 
 +  "shownColumns": ["model", "version", "cpu", "cpumhz", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"], 
 +  "filterColumns": {"model": "^MMC543HV$"} 
 +} -->
  
-===== Hardware info ===== 
-^ Architecture | MIPS | 
-^ Vendor | Atheros | 
-^ Bootloader | CFE | 
-^ System-On-Chip | AR7130 | 
-^ CPU Speed | 300 Mhz | 
-^ Flash size | 4 MB (up to 16 MB)| 
-^ RAM | 32 MB (Max 64 MB) DDR SDRAM | 
-^ Wireless | 1 × 9.2mm MiniPCI slot , support all Compex MiniPCI cards | 
-^ Ethernet | 1 × 10/100 Base-TX Ethernet Port (with Auto MDI/MDIX) | 
-^ USB | 2 × USB 2.0 ports (optional) | 
-^ Serial | yes | 
-^ JTAG | yes | 
  
 ===== Installation ===== ===== Installation =====
 +<!-- ToH: {
 +  "source": "json",
 +  "dom": "t",
 +  "paging": false,
 +  "rotate": true,
 +  "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"],
 +  "filterColumns": {"model": "^MMC543HV$"}
 +} -->
 +
 +-> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
 +
  
 ==== Restore mode ==== ==== Restore mode ====
Line 42: Line 61:
 Diagnostic LED will now stop blinking for a while; if the flashing procedure is successfully done, it will start blinking slowly. Now reboot your router manually (turn off - turn on) and OpenWrt will boot.  Diagnostic LED will now stop blinking for a while; if the flashing procedure is successfully done, it will start blinking slowly. Now reboot your router manually (turn off - turn on) and OpenWrt will boot. 
  
-===== Upgrading OpenWRT (on Compex Myloader) =====+===== Upgrading OpenWrt (on Compex Myloader) =====
  
 === Minimum Requirement === === Minimum Requirement ===
-  -Compex loader version 2.54 or above. +  - Compex loader version 2.54 or above. 
-  -OpenWRT will only be supported on WP543 with 4MB NOR flash and above. +  - OpenWrt will only be supported on WP543 with 4MB NOR flash and above. 
-  -Please ensure that the Ethernet connection is able to ping address = 192.168.168.1 +  - Please ensure that the Ethernet connection is able to ping address = 192.168.168.1 
-  -If there is a USB NAND flash available on board, you would need to change the loader configuration. Please refer to “what to do if there is a onboard NAND Flash”.+  - If there is a USB NAND flash available on board, you would need to change the loader configuration. Please refer to “what to do if there is a onboard NAND Flash”.
  
-=== Compiling OpenWRT suitable for use on WP543 ===+=== Compiling OpenWrt suitable for use on WP543 ===
   - Getting source codes<code bash>   - Getting source codes<code bash>
 $ svn co -r 12448 https://snv.openwrt.org/openwrt/trunk $ svn co -r 12448 https://snv.openwrt.org/openwrt/trunk
Line 62: Line 81:
 $ cp wp543.config .config $ cp wp543.config .config
 $ make $ make
-</code>OpenWRT Firmware will be in //bin/openwrt-ar71xx-wp543.bin//+</code> 
 + 
 +OpenWrt Firmware will be in //bin/openwrt-ar71xx-wp543.bin//
  
-=== Uploading the OpenWRT firmware to WP543 running MyLoader v2.54.0717 ===+=== Uploading the OpenWrt firmware to WP543 running MyLoader v2.54.0717 ===
  
 a. Via Compex Firmware a. Via Compex Firmware
Line 73: Line 94:
   * Go to the firmware upgrade mode (By pressing and hold the Reset button and plug-in the power adapter).   * Go to the firmware upgrade mode (By pressing and hold the Reset button and plug-in the power adapter).
   * Upload the OpenWrt image to the device (//$// **tftp -i 192.168.168.1 put openwrt-ar71xx-wp543.bin**)   * Upload the OpenWrt image to the device (//$// **tftp -i 192.168.168.1 put openwrt-ar71xx-wp543.bin**)
 +
 +
 +===== Hardware info =====
 +^ Architecture     | MIPS                                                        |
 +^ Vendor           | Atheros                                                     |
 +^ Bootloader       | CFE                                                         |
 +^ System-On-Chip   | AR7130                                                      |
 +^ CPU Speed        | 300 Mhz                                                     |
 +^ Flash size       | 4 MB (up to 16 MB)                                          |
 +^ RAM              | 32 MB (Max 64 MB) DDR SDRAM                                 |
 +^ Wireless         | 1 × 9.2mm MiniPCI slot , support all Compex MiniPCI cards   |
 +^ Ethernet         | 1 × 10/100 Base-TX Ethernet Port (with Auto MDI/MDIX)       |
 +^ USB              | 2 × USB 2.0 ports (optional)                                |
 +^ Serial           | yes                                                         |
 +^ JTAG             | yes                                                         |
 +
  
 ===== Wireless ===== ===== Wireless =====
Line 87: Line 124:
   *<del>[[http://cpx.px.cz/|Another Compex forum (CZ/ENG)]]</del>   *<del>[[http://cpx.px.cz/|Another Compex forum (CZ/ENG)]]</del>
  
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>AR7130 4flash 32ram}}
  • Last modified: 2016/02/25 09:54
  • by dangh