Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:comfast:cf-wr800n [2015/04/27 07:27] – created rogerpueyotoh:comfast:cf-wr800n [2021/05/15 10:42] – [Tags] danitool
Line 1: Line 1:
 +====== COMFAST CF-WR800N ======
  
 +{{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
 +
 +The [[http://www.comfast.cn/product/minizhongji/item-170.html|Comfast CF-WR800N]] is wall-plug wireless router based on the [[https://wikidevi.com/wiki/MediaTek_MT7620|MediaTek MT7620A]] chip with one Ethernet port and a 802.11n 2T/2R 2.4 GHz 300Mbps wireless interface. It comes with OpenWrt as the stock firmware, with a custom web interface to configure the device as AP, WiFi repeater amplifier, etc.
 +
 +
 +===== Supported Versions =====
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,c,c,c,c,c,c
 +filter  : Model=CF-WR800N
 +----
 +
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Model=CF-WR800N
 +----
 +
 +
 +===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : l,c,c
 +filter  : Model=CF-WR800N
 +----
 +
 +-> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
 +
 +
 +  - Download sysupgrade.bin as shown above to to /tmp.
 +  - sysupgrade\\ <code>
 +root@COMFAST:/tmp# sysupgrade -v -n openwrt-15.05-ramips-mt7620-cf-wr800n-squashfs-sysupgrade.bin 
 +killall: watchdog: no process killed
 +Sending TERM to remaining processes ... mbox-config uhttpd ntpd ubusd askfirst logd netifd dnsmasq 
 +Sending KILL to remaining processes ... askfirst 
 +Switching to ramdisk...
 +Performing system upgrade...
 +Unlocking firmware ...
 +
 +Writing from <stdin> to firmware ...     
 +Upgrade completed
 +Rebooting system...
 +</code>
 +  - After reboot the device is accessible on 192.168.1.1
 +
 +===== Hardware =====
 +==== Info ====
 +^ Architecture        | MIPS 24KEc V5.0 (ramips)              |
 +^ Vendor              | MediaTek                              |
 +^ Bootloader          | U-boot 1.1.3                          |
 +^ System-On-Chip      | MediaTek MT7620N                      |
 +^ CPU Speed           | 580MHz                                |
 +^ RAM memory          | 32 MB DDR                             |
 +^ Flash memory        | 8 MB                                  |
 +^ Flash chip          | MX25L6405D                            |
 +^ Wired network       | 1x Ethernet 100 Mbps (switched)       |
 +^ Ethernet chip       | MediaTek MT7530 (SoC)                 |
 +^ Ethernet switch     | MediaTek MT7530 (integrated)          |
 +^ Wireless network    | 2.4 GHz 802.11n MiMo 2x2:2            |
 +^ Wireless chip       | MediaTek 7620 (RF), 5390 (RT) (SoC)   |
 +^ Wireless antennas   | 2 x sticker antennae                  |
 +^ USB                 | No                                    |
 +^ Serial port         | Yes (TTL pins)                        |
 +
 +
 +==== Serial connection ====
 +The serial port of the Comfast CF-WR800N can be accessed using the TTL pins shown in the image below. The pins are clearly labeled on the board. A voltage level converter (such as a CP2102 TTL-USB dongle) is required.
 +
 +The communication settings are: 115200 bps 8N1.
 +
 +==== GPIO ====
 +
 +
 +
 +===== Stock firmware =====
 +
 +The Comfast CF-WR800N devices are shipped with OpenWrt:
 +
 +<code>
 +BusyBox v1.22.1 (2014-11-14 15:31:55 CST) built-in shell (ash)
 +Enter 'help' for a list of built-in commands.
 +
 +  _______                     ________        __
 +       |.-----.-----.-----.|  |  |  |.----.|  |_
 +     ||  _  |  -__|     ||  |  |  ||   _||   _|
 + |_______||   __|_____|__|__||________||__|  |____|
 +          |__| W I R E L E S S   F R E E D O M
 + -----------------------------------------------------
 + CHAOS CALMER (Bleeding Edge, unknown)
 + -----------------------------------------------------
 +  * 1 1/2 oz Gin            Shake with a glassful
 +  * 1/4 oz Triple Sec       of broken ice and pour
 +  * 3/4 oz Lime Juice       unstrained into a goblet.
 +  * 1 1/2 oz Orange Juice
 +  * 1 tsp. Grenadine Syrup
 + -----------------------------------------------------
 +root@COMFAST:/# 
 +</code>
 +
 +==== Stock network settings ====
 +
 +The Ethernet port is connected to port #4 of the switch. In the stock firmware, it belongs to eth0.2, which is in the **br-lan** and **wan6** networks (but not in the **wan**).
 +
 +<code>
 +config interface 'loopback'
 +        option ifname 'lo'
 +        option proto 'static'
 +        option ipaddr '127.0.0.1'
 +        option netmask '255.0.0.0'
 +
 +config globals 'globals'
 +        option ula_prefix 'fd93:cba4:51b8::/48'
 +
 +config interface 'lan'
 +        option force_link '1'
 +        option macaddr '41:45:ee:d7:89:63'
 +        option ifname 'eth0.1 eth0.2'
 +        option type 'bridge'
 +        option proto 'static'
 +        option ipaddr '192.168.10.1'
 +        option netmask '255.255.255.0'
 +        option ip6assign '60'
 +
 +config eth0.1 'def_lan'
 +
 +config interface 'wan'
 +        option force_link '1'
 +        option macaddr '41:45:ee:d7:89:64'
 +        option proto 'dhcp'
 +
 +config interface 'wan6'
 +        option ifname 'eth0.2'
 +        option proto 'dhcpv6'
 +
 +config eth0.2 'def_wan'
 +
 +config switch
 +        option name 'switch0'
 +        option reset '1'
 +        option enable_vlan '1'
 +
 +config switch_vlan
 +        option device 'switch0'
 +        option vlan '1'
 +        option ports '0 1 2 3 6t'
 +
 +config switch_vlan
 +        option device 'switch0'
 +        option vlan '2'
 +        option ports '4 6t'
 +</code>
 +
 +==== Stock firmware login ====
 +
 +The stock firmware has a web interface accessible via http://192.168.10.1 (user/password: admin). The telnet server is also active, without password:
 +
 +<code>
 +telnet 192.168.10.1
 +Trying 192.168.10.1...
 +Connected to 192.168.10.1.
 +Escape character is '^]'.
 + === IMPORTANT ============================
 +  Use 'passwd' to set your login password
 +  this will disable telnet and enable SSH
 + ------------------------------------------
 +
 +
 +BusyBox v1.22.1 (2014-11-14 15:31:55 CST) built-in shell (ash)
 +Enter 'help' for a list of built-in commands.
 +[...]
 +root@COMFAST:/# 
 +</code>
 +
 +
 +==== U-boot bootlog ====
 +<code>
 +U-Boot 1.1.3 (Nov 21 2014 - 10:27:22)
 +
 +Board: Ralink APSoC DRAM:  32 MB
 +relocate_code Pointer at: 81fb8000
 +enable ephy clock...done. rf reg 29 = 5
 +SSC disabled.
 +******************************
 +Software System Reset Occurred
 +******************************
 +spi_wait_nsec: 29 
 +spi device id: c2 20 17 c2 20 (2017c220)
 +find flash: MX25L6405D
 +raspi_read: from:30000 len:1000 
 +*** Warning - bad CRC, using default environment
 +
 +============================================ 
 +Ralink UBoot Version: 4.2.1.0
 +-------------------------------------------- 
 +ASIC 7620_MP (Port5<->None)
 +DRAM component: 256 Mbits DDR, width 16
 +DRAM bus: 16 bit
 +Total memory: 32 MBytes
 +Flash component: SPI Flash
 +Date:Nov 21 2014  Time:10:27:22
 +============================================ 
 +icache: sets:512, ways:4, linesz:32 ,total:65536
 +dcache: sets:256, ways:4, linesz:32 ,total:32768 
 +
 + ##### The CPU freq = 580 MHZ #### 
 + estimate memory size =32 Mbytes
 +
 +Please choose the operation: 
 +   1: Load system code to SDRAM via TFTP. 
 +   2: Load system code then write to Flash via TFTP. 
 +   3: Boot system code via Flash (default).
 +   4: Entr boot command line interface.
 +   7: Load Boot Loader code then write to Flash via Serial. 
 +   9: Load Boot Loader code then write to Flash via TFTP. 
 +
 +You choosed 4
 +</code>
 +
 +===== Bootlogs =====
 +==== Stock OpenWrt bootlog ====
 +<WRAP bootlog>
 +<nowiki>3: System Boot system code via Flash.
 +## Booting image at bc050000 ...
 +raspi_read: from:50000 len:40 
 +   Image Name:   MIPS OpenWrt Linux-3.14.18
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed)
 +   Data Size:    1062289 Bytes =  1 MB
 +   Load Address: 80000000
 +   Entry Point:  80000000
 +raspi_read: from:50040 len:103591 
 +   Verifying Checksum ... OK
 +   Uncompressing Kernel Image ... OK
 +No initrd
 +## Transferring control to Linux (at address 80000000) ...
 +## Giving linux memsize in MB, 32
 +
 +Starting kernel ...
 +
 +[    0.000000] Linux version 3.14.18 (jiangyaohui@zhuyufang-02241341) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #3 Thu Nov 20 17:13:48 CST 2014
 +[    0.000000] Board has DDR1
 +[    0.000000] Analog PMU set to hw control
 +[    0.000000] Digital PMU set to hw control
 +[    0.000000] SoC Type: Ralink MT7620N ver:2 eco:6
 +[    0.000000] bootconsole [early0] enabled
 +[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
 +[    0.000000] MIPS: machine is Comfast CF-WR800N
 +[    0.000000] Determined physical RAM map:
 +[    0.000000]  memory: 02000000 @ 00000000 (usable)
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] Zone ranges:
 +[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
 +[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
 +[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
 +[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
 +[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 +[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 +[    0.000000] Writing ErrCtl register=000151d4
 +[    0.000000] Readback ErrCtl register=000151d4
 +[    0.000000] Memory: 29152K/32768K available (2317K kernel code, 121K rwdata, 456K rodata, 168K init, 180K bss, 3616K reserved)
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 +[    0.000000] NR_IRQS:256
 +[    0.000000] CPU Clock: 580MHz
 +[    0.000000] systick: running - mult: 214748, shift: 32
 +[    0.000000] genirq: Flags mismatch irq 7. 00014600 (timer) vs. 00014600 (systick)
 +[    0.000000] Calibrating delay loop... 766.77 BogoMIPS (lpj=3833856)
 +[    0.040000] pid_max: default: 32768 minimum: 301
 +[    0.040000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.040000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.050000] pinctrl core: initialized pinctrl subsystem
 +[    0.050000] NET: Registered protocol family 16
 +[    0.060000] bio: create slab <bio-0> at 0
 +[    0.060000] rt2880_gpio 10000600.gpio: registering 24 gpios
 +[    0.070000] rt2880_gpio 10000600.gpio: registering 24 irq handlers
 +[    0.070000] rt2880_gpio 10000638.gpio: registering 16 gpios
 +[    0.070000] rt2880_gpio 10000638.gpio: registering 16 irq handlers
 +[    0.070000] rt2880_gpio 10000688.gpio: registering 1 gpios
 +[    0.080000] rt2880_gpio 10000688.gpio: registering 1 irq handlers
 +[    0.080000] Switched to clocksource systick
 +[    0.080000] NET: Registered protocol family 2
 +[    0.090000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.090000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.090000] TCP: Hash tables configured (established 1024 bind 1024)
 +[    0.110000] TCP: reno registered
 +[    0.110000] UDP hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.110000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.110000] NET: Registered protocol family 1
 +[    0.130000] rt-timer 10000100.timer: maximum frequency is 2441Hz
 +[    0.130000] futex hash table entries: 256 (order: -1, 3072 bytes)
 +[    0.150000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    0.160000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    0.170000] msgmni has been set to 56
 +[    0.180000] io scheduler noop registered
 +[    0.180000] io scheduler deadline registered (default)
 +[    0.180000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
 +[    0.200000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A
 +[    0.200000] console [ttyS0] enabled
 +[    0.200000] console [ttyS0] enabled
 +[    0.200000] bootconsole [early0] disabled
 +[    0.200000] bootconsole [early0] disabled
 +[    0.220000] m25p80 spi32766.0: found mx25l6405d, expected w25q128
 +[    0.230000] m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
 +[    0.230000] 4 ofpart partitions found on MTD device spi32766.0
 +[    0.240000] Creating 4 MTD partitions on "spi32766.0":
 +[    0.250000] 0x000000000000-0x000000030000 : "u-boot"
 +[    0.250000] 0x000000030000-0x000000040000 : "u-boot-env"
 +[    0.260000] 0x000000040000-0x000000050000 : "factory"
 +[    0.270000] 0x000000050000-0x000000800000 : "firmware"
 +[    0.270000] 0x0000001535d1-0x000000800000 : "rootfs"
 +[    0.280000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
 +[    0.300000] mtd: device 4 (rootfs) set to be root filesystem
 +[    0.300000] 1 squashfs-split partitions found on MTD device rootfs
 +[    0.300000] 0x000000510000-0x000000800000 : "rootfs_data"
 +[    0.320000] ralink_soc_eth 10100000.ethernet: Enabling TSO
 +[    0.320000] gsw: setting port4 to ephy mode
 +[    0.320000] (unregistered net_device): port 4 link up (100Mbps/Full duplex)
 +[    0.340000] ralink_soc_eth 10100000.ethernet: loaded mt7530 driver
 +[    0.340000] eth0: done loading
 +[    0.340000] rt3xxx-usbphy usbphy.3: loaded
 +[    0.340000] rt2880_wdt 10000120.watchdog: Initialized
 +[    0.360000] TCP: cubic registered
 +[    0.360000] NET: Registered protocol family 17
 +[    0.360000] Bridge firewalling registered
 +[    0.360000] 8021q: 802.1Q VLAN Support v1.8
 +[    0.380000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
 +[    0.400000] Freeing unused kernel memory: 168K (802d6000 - 80300000)
 +procd: Console is alive
 +procd: - watchdog -
 +procd: - preinit -
 +[    6.140000] random: mktemp urandom read with 73 bits of entropy available
 +Press the [f] key and hit [enter] to enter failsafe mode
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
 +jffs2 is ready
 +jffs2 is ready
 +[    9.530000] jffs2: notice: (268) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 7 of xref (0 dead, 0 orphan) found.
 +switching to overlay
 +procd: - early -
 +procd: - watchdog -
 +procd: - ubus -
 +procd: - init -
 +Please press Enter to activate this console.
 +[   12.700000] NET: Registered protocol family 10
 +[   13.090000] ip6_tables: (C) 2000-2006 Netfilter Core Team
 +[   13.190000] u32 classifier
 +[   13.200000]     input device check on
 +[   13.210000]     Actions configured
 +[   13.210000] Mirror/redirect action on
 +[   13.220000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
 +[   13.230000] Loading modules backported from Linux version master-2014-09-26-0-g25e3efa
 +[   13.240000] Backport generated by backports.git backports-20140905-1-gde42785
 +[   13.260000] Ebtables v2.0 registered
 +[   13.270000] ip_tables: (C) 2000-2006 Netfilter Core Team
 +[   13.280000] lib80211: common routines for IEEE802.11 drivers
 +[   13.350000] xt_time: kernel timezone is -0000
 +[   13.390000] cfg80211: Calling CRDA to update world regulatory domain
 +[   13.390000] cfg80211: World regulatory domain updated:
 +[   13.400000] cfg80211:  DFS Master region: unset
 +[   13.400000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
 +[   13.420000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.420000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.420000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.440000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.440000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
 +[   13.460000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
 +[   13.460000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.470000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
 +[   13.520000] PPP generic driver version 2.4.2
 +[   13.530000] NET: Registered protocol family 24
 +[   13.620000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
 +[   13.630000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
 +[   20.450000] random: nonblocking pool is initialized
 +[   21.320000] device eth0.1 entered promiscuous mode
 +[   21.320000] device eth0 entered promiscuous mode
 +[   21.350000] br-lan: port 1(eth0.1) entered forwarding state
 +[   21.360000] br-lan: port 1(eth0.1) entered forwarding state
 +[   21.420000] device eth0.2 entered promiscuous mode
 +[   21.430000] br-lan: port 2(eth0.2) entered forwarding state
 +[   21.440000] br-lan: port 2(eth0.2) entered forwarding state
 +[   23.130000] cfg80211: Calling CRDA for country: CN
 +[   23.140000] cfg80211: Regulatory domain changed to country: CN
 +[   23.140000] cfg80211:  DFS Master region: FCC
 +[   23.140000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
 +[   23.160000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
 +[   23.160000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A)
 +[   23.180000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
 +[   23.180000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
 +[   23.180000] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
 +[   23.180000] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
 +[   23.180000] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
 +[   23.500000] br-lan: port 1(eth0.1) entered forwarding state
 +[   23.510000] br-lan: port 2(eth0.2) entered forwarding state
 +procd: - init complete -
 +[   27.770000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
 +[   27.770000] device wlan0 entered promiscuous mode
 +[   27.780000] br-lan: port 3(wlan0) entered forwarding state
 +[   27.790000] br-lan: port 3(wlan0) entered forwarding state
 +[   27.790000] br-lan: port 3(wlan0) entered disabled state
 +[   27.840000] br-lan: port 3(wlan0) entered forwarding state
 +[   27.840000] br-lan: port 3(wlan0) entered forwarding state
 +[   27.850000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
 +[   30.050000] br-lan: port 3(wlan0) entered forwarding state
 +
 +
 +
 +BusyBox v1.22.1 (2014-11-14 15:31:55 CST) built-in shell (ash)
 +Enter 'help' for a list of built-in commands.
 +
 +  _______                     ________        __
 +       |.-----.-----.-----.|  |  |  |.----.|  |_
 +     ||  _  |  -__|     ||  |  |  ||   _||   _|
 + |_______||   __|_____|__|__||________||__|  |____|
 +          |__| W I R E L E S S   F R E E D O M
 + -----------------------------------------------------
 + CHAOS CALMER (Bleeding Edge, unknown)
 + -----------------------------------------------------
 +  * 1 1/2 oz Gin            Shake with a glassful
 +  * 1/4 oz Triple Sec       of broken ice and pour
 +  * 3/4 oz Lime Juice       unstrained into a goblet.
 +  * 1 1/2 oz Orange Juice
 +  * 1 tsp. Grenadine Syrup
 + -----------------------------------------------------
 +root@COMFAST:/#</nowiki>
 +</WRAP>\\
 +
 +==== OpenWrt bootlog ====
 +
 +This is a log using OpenWrt  CHAOS CALMER (Bleeding Edge, r43977)
 +
 +<WRAP bootlog>
 +<nowiki>U-Boot 1.1.3 (Jan  3 2014 - 09:12:42)
 +
 +MAX Board: Ralink APSoC DRAM:  64 MB
 +relocate_code Pointer at: 83fb4000
 +enable ephy clock...done. rf reg 29 = 5
 +SSC disabled.
 +******************************
 +Software System Reset Occurred
 +******************************
 +spi_wait_nsec: 29 
 +spi device id: 1c 30 17 1c 30 (30171c30)
 +find flash: EN25Q64
 +raspi_read: from:30000 len:1000 
 +raspi_read: from:30000 len:1000 
 +============================================ 
 +Ralink UBoot Version: 4.1.1.0
 +-------------------------------------------- 
 +ASIC 7620_MP (Port5<->None)
 +DRAM component: 512 Mbits DDR, width 16
 +DRAM bus: 16 bit
 +Total memory: 64 MBytes
 +Flash component: SPI Flash
 +Date:Jan  3 2014  Time:09:12:42
 +============================================ 
 +icache: sets:512, ways:4, linesz:32 ,total:65536
 +dcache: sets:256, ways:4, linesz:32 ,total:32768 
 + ##### The CPU freq = 580 MHZ #### 
 + estimate memory size =64 Mbytes
 +
 +Please choose the operation: 
 +   1: Load system code to SDRAM via TFTP. 
 +   2: Load system code then write to Flash via TFTP. 
 +   3: Boot system code via Flash (default).
 +   4: Entr boot command line interface.
 +   7: Load Boot Loader code then write to Flash via Serial. 
 +   9: Load Boot Loader code then write to Flash via TFTP. 
 + 4  3  2  1  0 
 +
 +3: System Boot system code via Flash.
 +## Booting image at bc050000 ...
 +raspi_read: from:50000 len:40 
 +   Image Name:   MIPS OpenWrt Linux-3.14.28
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed)
 +   Data Size:    1164568 Bytes =  1.1 MB
 +   Load Address: 80000000
 +   Entry Point:  80000000
 +raspi_read: from:50040 len:11c518 
 +   Verifying Checksum ... OK
 +   Uncompressing Kernel Image ... OK
 +No initrd
 +## Transferring control to Linux (at address 80000000) ...
 +## Giving linux memsize in MB, 64
 +
 +Starting kernel ...
 +
 +[    0.000000] Linux version 3.14.28 (openwrt@gb-10) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43977) ) #1 Fri Jan 16 16:33:53 UTC 2015
 +[    0.000000] Board has DDR1
 +[    0.000000] Analog PMU set to hw control
 +[    0.000000] Digital PMU set to hw control
 +[    0.000000] SoC Type: Ralink MT7620N ver:2 eco:6
 +[    0.000000] bootconsole [early0] enabled
 +[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
 +[    0.000000] MIPS: machine is Nexx WT3020
 +[    0.000000] Determined physical RAM map:
 +[    0.000000]  memory: 04000000 @ 00000000 (usable)
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] Zone ranges:
 +[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
 +[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
 +[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
 +[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 +[    0.000000] Writing ErrCtl register=00017df8
 +[    0.000000] Readback ErrCtl register=00017df8
 +[    0.000000] Memory: 61316K/65536K available (2549K kernel code, 134K rwdata, 508K rodata, 192K init, 188K bss, 4220K reserved)
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 +[    0.000000] NR_IRQS:256
 +[    0.000000] CPU Clock: 580MHz
 +[    0.000000] systick: running - mult: 214748, shift: 32
 +[    0.000000] genirq: Flags mismatch irq 7. 00014600 (timer) vs. 00014600 (systick)
 +[    0.010000] Calibrating delay loop... 766.77 BogoMIPS (lpj=3833856)
 +[    0.050000] pid_max: default: 32768 minimum: 301
 +[    0.050000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.060000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.060000] pinctrl core: initialized pinctrl subsystem
 +[    0.070000] NET: Registered protocol family 16
 +[    0.080000] bio: create slab <bio-0> at 0
 +[    0.080000] rt2880_gpio 10000600.gpio: registering 24 gpios
 +[    0.090000] rt2880_gpio 10000600.gpio: registering 24 irq handlers
 +[    0.090000] rt2880_gpio 10000660.gpio: registering 32 gpios
 +[    0.100000] rt2880_gpio 10000660.gpio: registering 32 irq handlers
 +[    0.100000] rt2880_gpio 10000688.gpio: registering 1 gpios
 +[    0.110000] rt2880_gpio 10000688.gpio: registering 1 irq handlers
 +[    0.110000] Switched to clocksource systick
 +[    0.120000] NET: Registered protocol family 2
 +[    0.120000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.140000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.150000] TCP: Hash tables configured (established 1024 bind 1024)
 +[    0.170000] TCP: reno registered
 +[    0.170000] UDP hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.170000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.200000] NET: Registered protocol family 1
 +[    0.200000] rt-timer 10000100.timer: maximum frequency is 2441Hz
 +[    0.220000] futex hash table entries: 256 (order: -1, 3072 bytes)
 +[    0.240000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    0.260000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    0.280000] msgmni has been set to 119
 +[    0.280000] io scheduler noop registered
 +[    0.300000] io scheduler deadline registered (default)
 +[    0.300000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
 +[    0.320000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A
 +[    0.350000] console [ttyS0] enabled
 +[    0.350000] console [ttyS0] enabled
 +[    0.350000] bootconsole [early0] disabled
 +[    0.350000] bootconsole [early0] disabled
 +[    0.380000] m25p80 spi32766.0: found en25q64, expected w25q64
 +[    0.380000] m25p80 spi32766.0: en25q64 (8192 Kbytes)
 +[    0.400000] 4 ofpart partitions found on MTD device spi32766.0
 +[    0.410000] Creating 4 MTD partitions on "spi32766.0":
 +[    0.420000] 0x000000000000-0x000000030000 : "u-boot"
 +[    0.440000] 0x000000030000-0x000000040000 : "u-boot-env"
 +[    0.440000] 0x000000040000-0x000000050000 : "factory"
 +[    0.460000] 0x000000050000-0x000000800000 : "firmware"
 +[    0.490000] 2 uimage-fw partitions found on MTD device firmware
 +[    0.510000] 0x000000050000-0x00000016c558 : "kernel"
 +[    0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
 +[    0.540000] 0x00000016c558-0x000000800000 : "rootfs"
 +[    0.550000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
 +[    0.580000] mtd: device 5 (rootfs) set to be root filesystem
 +[    0.590000] 1 squashfs-split partitions found on MTD device rootfs
 +[    0.600000] 0x000000340000-0x000000800000 : "rootfs_data"
 +[    0.620000] ralink_soc_eth 10100000.ethernet (unregistered net_device): port 0 link up (100Mbps/Full duplex)
 +[    0.640000] ralink_soc_eth 10100000.ethernet: loaded mt7620 driver
 +[    0.650000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
 +[    0.670000] rt3xxx-usbphy usbphy.3: loaded
 +[    0.670000] rt2880_wdt 10000120.watchdog: Initialized
 +[    0.690000] TCP: cubic registered
 +[    0.690000] NET: Registered protocol family 17
 +[    0.700000] Bridge firewalling registered
 +[    0.710000] 8021q: 802.1Q VLAN Support v1.8
 +[    0.730000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
 +[    0.750000] Freeing unused kernel memory: 192K (80320000 - 80350000)
 +procd: Console is alive
 +procd: - watchdog -
 +[    5.370000] usbcore: registered new interface driver usbfs
 +[    5.390000] usbcore: registered new interface driver hub
 +[    5.390000] usbcore: registered new device driver usb
 +[    5.410000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +[    5.430000] ehci-platform: EHCI generic platform driver
 +[    5.830000] rt3xxx-usbphy usbphy.3: remote usb device wakeup disabled
 +[    5.850000] rt3xxx-usbphy usbphy.3: UTMI 16bit 30MHz
 +[    5.850000] ehci-platform 101c0000.ehci: EHCI Host Controller
 +[    5.870000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
 +[    5.890000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
 +[    5.910000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
 +[    5.910000] hub 1-0:1.0: USB hub found
 +[    5.930000] hub 1-0:1.0: 1 port detected
 +[    5.930000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 +[    5.950000] ohci-platform: OHCI generic platform driver
 +[    5.960000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
 +[    5.980000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
 +[    5.980000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
 +[    6.070000] hub 2-0:1.0: USB hub found
 +[    6.070000] hub 2-0:1.0: 1 port detected
 +procd: - preinit -
 +[    6.950000] 8021q: adding VLAN 0 to HW filter on device eth0
 +[    6.990000] random: mktemp urandom read with 65 bits of entropy available
 +Press the [f] key and hit [enter] to enter failsafe mode
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
 +jffs2 is ready
 +No jffs2 marker was found
 +[   10.640000] jffs2: notice: (310) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 6 of xref (0 dead, 0 orphan) found.
 +switching to overlay
 +procd: - early -
 +procd: - watchdog -
 +procd: - ubus -
 +procd: - init -
 +Please press Enter to activate this console.
 +[   13.590000] NET: Registered protocol family 10
 +[   13.610000] ip6_tables: (C) 2000-2006 Netfilter Core Team
 +[   13.630000] Loading modules backported from Linux version master-2014-11-04-0-gf3660a2
 +[   13.650000] Backport generated by backports.git backports-20141023-2-g4ff890b
 +[   13.670000] ip_tables: (C) 2000-2006 Netfilter Core Team
 +[   13.690000] nf_conntrack version 0.5.0 (961 buckets, 3844 max)
 +[   13.730000] xt_time: kernel timezone is -0000
 +[   13.770000] cfg80211: Calling CRDA to update world regulatory domain
 +[   13.780000] cfg80211: World regulatory domain updated:
 +[   13.800000] cfg80211:  DFS Master region: unset
 +[   13.800000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
 +[   13.820000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.840000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.860000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.860000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.890000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
 +[   13.910000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
 +[   13.910000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
 +[   13.940000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
 +[   13.940000] PPP generic driver version 2.4.2
 +[   13.940000] NET: Registered protocol family 24
 +[   13.940000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
 +[   13.940000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
 +procd: - init complete -
 +[   19.730000] 8021q: adding VLAN 0 to HW filter on device eth0
 +[   19.760000] device eth0.1 entered promiscuous mode
 +[   19.770000] device eth0 entered promiscuous mode
 +[   19.780000] br-lan: port 1(eth0.1) entered forwarding state
 +[   19.800000] br-lan: port 1(eth0.1) entered forwarding state
 +[   21.800000] br-lan: port 1(eth0.1) entered forwarding state
 +[   21.800000] ralink_soc_eth 10100000.ethernet eth0: port 0 link down
 +[   22.120000] br-lan: port 1(eth0.1) entered disabled state
 +[   28.150000] random: nonblocking pool is initialized</nowiki>
 +</WRAP>\\
 +
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>ramips MT7620N 8Flash 32RAM 1port FastEthernet 802.11bgn wall_plug}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1