Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:comfast:comfast_cf-e314n_v2 [2020/07/10 18:02] – Created from the form at meta:create_new_device_page kchungtoh:comfast:cf-e314n_v2 [2021/05/09 10:39] – ↷ Page name changed from toh:comfast:comfast_cf-e314n_v2 to toh:comfast:cf-e314n_v2 tmomas
Line 338: Line 338:
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki>[    0.000000] Linux version 5.4.50 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13768-f632747704)) #0 Thu Jul 9 09:11:31 2020 
 +[    0.000000] printk: bootconsole [early0] enabled 
 +[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) 
 +[    0.000000] MIPS: machine is COMFAST CF-E314N v2 
 +[    0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] 
 +[    0.000000] On node 0 totalpages: 16384 
 +[    0.000000]   Normal zone: 144 pages used for memmap 
 +[    0.000000]   Normal zone: 0 pages reserved 
 +[    0.000000]   Normal zone: 16384 pages, LIFO batch:3 
 +[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 
 +[    0.000000] pcpu-alloc: [0] 0 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240 
 +[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 57020K/65536K available (5062K kernel code, 186K rwdata, 1168K rodata, 1192K init, 205K bss, 8516K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS: 51 
 +[    0.000000] random: get_random_bytes called from start_kernel+0x32c/0x520 with crng_init=0 
 +[    0.000000] CPU clock: 650.000 MHz 
 +[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns 
 +[    0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns 
 +[    0.008276] Calibrating delay loop... 431.10 BogoMIPS (lpj=862208) 
 +[    0.042754] pid_max: default: 32768 minimum: 301 
 +[    0.047816] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.055543] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.069107] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 
 +[    0.079451] futex hash table entries: 256 (order: -1, 3072 bytes, linear) 
 +[    0.086814] pinctrl core: initialized pinctrl subsystem 
 +[    0.095704] NET: Registered protocol family 16 
 +[    0.139862] clocksource: Switched to clocksource MIPS 
 +[    0.146796] NET: Registered protocol family 2 
 +[    0.152679] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) 
 +[    0.161607] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.169706] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.177159] TCP: Hash tables configured (established 1024 bind 1024) 
 +[    0.184081] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) 
 +[    0.191046] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) 
 +[    0.198911] NET: Registered protocol family 1 
 +[    0.203593] PCI: CLS 0 bytes, default 32 
 +[    0.212585] workingset: timestamp_bits=14 max_order=14 bucket_order=0 
 +[    0.228025] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.234197] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.261708] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) 
 +[    0.272738] pinctrl-single 1804002c.pinmux: 576 pins, size 72 
 +[    0.280087] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled 
 +[    0.289678] printk: console [ttyS0] disabled 
 +[    0.294323] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A 
 +[    0.303442] printk: console [ttyS0] enabled 
 +[    0.312503] printk: bootconsole [early0] disabled 
 +[    0.345311] spi-nor spi0.0: w25q128 (16384 Kbytes) 
 +[    0.350369] 5 fixed-partitions partitions found on MTD device spi0.0 
 +[    0.356942] Creating 5 MTD partitions on "spi0.0": 
 +[    0.361933] 0x000000000000-0x000000010000 : "u-boot" 
 +[    0.368410] 0x000000010000-0x000000020000 : "art" 
 +[    0.374445] 0x000000020000-0x0000007e0000 : "firmware" 
 +[    0.384390] 2 uimage-fw partitions found on MTD device firmware 
 +[    0.390589] Creating 2 MTD partitions on "firmware": 
 +[    0.395738] 0x000000000000-0x000000210000 : "kernel" 
 +[    0.401987] 0x000000210000-0x0000007c0000 : "rootfs" 
 +[    0.408390] mtd: device 4 (rootfs) set to be root filesystem 
 +[    0.416642] 1 squashfs-split partitions found on MTD device rootfs 
 +[    0.423121] 0x000000430000-0x0000007c0000 : "rootfs_data" 
 +[    0.429909] 0x0000007e0000-0x0000007f0000 : "configs" 
 +[    0.436482] 0x0000007f0000-0x000000800000 : "nvram" 
 +[    0.445257] libphy: Fixed MDIO Bus: probed 
 +[    0.788958] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe. 
 +[    1.123849] random: fast init done 
 +[    1.428323] libphy: ag71xx_mdio: probed 
 +[    1.433914] libphy: ar8xxx-mdio: probed 
 +[    1.447957] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0 
 +[    1.495840] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] 
 +[    1.506007] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii 
 +[    1.512796] i2c /dev entries driver 
 +[    1.520024] NET: Registered protocol family 10 
 +[    1.532923] Segment Routing with IPv6 
 +[    1.536947] NET: Registered protocol family 17 
 +[    1.541646] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 
 +[    1.555043] 8021q: 802.1Q VLAN Support v1.8 
 +[    1.877985] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:04 [uid=004dd042, driver=Generic PHY] 
 +[    1.888667] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii 
 +[    1.896158] hctosys: unable to open rtc device (rtc0) 
 +[    1.906732] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. 
 +[    1.923989] Freeing unused kernel memory: 1192K 
 +[    1.928679] This architecture does not have kernel memory protection. 
 +[    1.935333] Run /sbin/init as init process 
 +[    2.642018] init: Console is alive 
 +[    2.646029] init: - watchdog - 
 +[    3.637001] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    3.705306] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[    3.723466] init: - preinit - 
 +[    4.748748] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    4.879039] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    4.993040] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    7.430197] eth1: link up (100Mbps/Full duplex) 
 +[    7.434980] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready 
 +[    9.692950] jffs2: notice: (542) jffs2_build_xattr_subsystem: complete building xattr subsystem, 18 of xdatum (0 unchecked, 18 orphan) and 26 of xref (0 dead, 26 orphan) found. 
 +[    9.710624] mount_root: switching to jffs2 overlay 
 +[    9.743641] overlayfs: upper fs does not support tmpfile. 
 +[    9.897522] urandom-seed: Seed file not found (/etc/urandom.seed) 
 +[    9.982227] eth1: link down 
 +[   10.004256] procd: - early - 
 +[   10.007368] procd: - watchdog - 
 +[   10.679094] procd: - watchdog - 
 +[   10.682794] procd: - ubus - 
 +[   10.779568] urandom_read: 5 callbacks suppressed 
 +[   10.779578] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   10.910951] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   10.919592] procd: - init - 
 +[   11.690077] kmodloader: loading kernel modules from /etc/modules.d/
 +[   11.847677] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056 
 +[   11.855599] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb 
 +[   11.943476] xt_time: kernel timezone is -0000 
 +[   12.135601] PPP generic driver version 2.4.2 
 +[   12.153163] NET: Registered protocol family 24 
 +[   12.249627] urngd: v1.0.2 started. 
 +[   12.294621] ath: EEPROM regdomain sanitized 
 +[   12.294637] ath: EEPROM regdomain: 0x64 
 +[   12.294641] ath: EEPROM indicates we should expect a direct regpair map 
 +[   12.294670] ath: Country alpha2 being used: 00 
 +[   12.294673] ath: Regpair used: 0x64 
 +[   12.308734] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' 
 +[   12.311410] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=12 
 +[   12.432408] kmodloader: done loading kernel modules from /etc/modules.d/
 +[   12.669135] random: crng init done 
 +[   50.058126] br-lan: port 1(eth1) entered blocking state 
 +[   50.063616] br-lan: port 1(eth1) entered disabled state 
 +[   50.069465] device eth1 entered promiscuous mode 
 +[   50.139933] eth0: link up (1000Mbps/Full duplex) 
 +[   50.159967] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   52.102341] eth1: link up (100Mbps/Full duplex) 
 +[   52.132028] br-lan: port 1(eth1) entered blocking state 
 +[   52.137461] br-lan: port 1(eth1) entered forwarding state 
 +[   52.190776] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1