Cisco WRVS4400N

Small Business / Home Router with L7 IPS and NAT (both hardware accelerated), a VLAN capable switch, pci wlan card (b/g/n).

Cisco WRVS4400N

None at this time.

OEM source code available at: FIXME

CPU Ram Flash Network USB Serial JTag
Vitesse VSC7385 (SparX G5) ? ? 1GbE(WAN), 4 GbE(LAN), 1 GbE(internal) No No No
Cavium Nwks. CNS1202 (STR9202) 64MiB 8/?16MiB 2GbE (internal) No Yes ?
Cavium Nwks. CNS1109 (STR9109) 16MiB ? 1GbE (internal) No Yes ?

The CNS1202 is the main processor and has connections to the VSC7385 and the CNS1109 via a internal GbE connections. CNS1109 and CNS1202 share the flash, but have different linux kernels and root-fs's.

Overview Please check out the article flash.layout. It contains an example and a couple of explanations.

Original Layout

Creating 5 MTD partitions on “str9100_flash”:

  • 0x00000000-0x00020000 : “BootLoader ”
  • 0x00020000-0x00040000 : “System Configuration”
  • 0x00040000-0x00100000 : “Signature”
  • 0x00100000-0x00680000 : “Main CPU(9202) Kernel”
  • 0x00680000-0x00800000 : “Wireless CPU(9109) Kernel”

ToDo:

  • cat /proc/mtd to find the mtd numbers and blocksize
  • cat /etc/fstab for mountpoints and filesystems
Cisco WRVS4400n V2 Flash Layout
Layer0 str9100_flash 8MiB
Layer1 mtd? BootLoader 128KiB mtd? System Configuration 128KiB mtd? Signature 768KiB mtd? Main CPU(9202) Kernel 5632KiB mtd? Wireless CPU(9109) Kernel 1536KiB
Layer2 kernel9202 ? rootfs 9202 ? kernel9109? rootfs 9109?
mountpoint
filesystem
Layer3 ?kernel 1 ?rootfs1 ?kernel 2 ?rootfs2
Size in KiB 128KiB 128KiB 768KiB ?KiB ?KiB ?KiB ?KiB ?KiB ?KiB
Name BootLoader System Conf. Signature kernel 1 static fs1 dynamic overlay1 kernel 2 static fs2 dynamic overlay2
mountpoint none none none none ? ? none ? ?
filesystem none none none none ? ? none ? ?

FIXME

FIXME

LuCI Web Upgrade Process

  • Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
  • Upload image file for sysupgrade to LuCI
  • Wait for reboot

Terminal Upgrade Process

FIXME

FIXME

FIXME

FIXME

hardware.button on howto use and configure the hardware button(s).

FIXME

Architecture ARM
Vendor Cavium Networks
bootloader ARMboot
System-On-Chip1 STR 9202 CPU: FA526id(wb) revision 1
CPU1/Speed 250 MHz
System-On-Chip2 STR 9109 CPU: FA526id(wb) revision 1
CPU2/Speed 250 MHz
Flash-Chip ?? ST 25P64V6P
Flash size ?? 8192 KiB
RAM NT5DS8M16FS-6K/5T 128MiB
RAM CPU1 64 MiB
RAM CPU2 16 / 32? MiB
Wireless RT2800 802.11n (Device ID: 1814:0601)
Ethernet Vitesse VSC7385 Gigabit w/ vlan support swconfig
Internet 10/100/1000
USB No
Serial Yes
JTAG No

WRVS4400n V2

Front:
FIXME Insert photo of front of casing

Back:
FIXME Insert photo of back of casing

Note: This will void your warranty!

To remove the cover: * remove the 4 rubber feet on the bottom * remove the underlying screws * unsnap the bottom part (back and the sides, careful with the front!)

Main PCB
PCB top PCB bottom The only non-hidden RAM chip

port.serial general information about the serial port, serial port cable, etc.

Two CPUs means two serial ports :)

  1. Ports
    • JP1: “WLAN-CPU” 9109
    • JP2: “MAIN-CPU” 9202
  2. Pins:
    • VDD (the [] marked pin)
    • RX
    • TX
    • GND (the pin with less solder in it)

Only RX TX and Ground are needed to use the terminal set up with 38400 baud, 8 data bits, no parity and one stop bit (38400 8N1). Uses 3.3V TTL.

How to connect to the Serial Port of this specific device:

**PCB with markings for serial port**

Serial connection parameters
for Cisco WRVS4400N
38400, 8N1

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
FIXME

Read about bootloader in general

Unmodified STR9202

ARMboot 1.1.0 (Nov 24 2008 - 14:05:27) Star maintain version 0.14.100000000 ARMboot code: 00000000 -> 0006a2e0 STR9100 CPU Clock: 250 MHz regular_reg: 3130 DDR Bank #0: 00000000 64 MB DDR Controller Data Bus Width: 32 bits Now bootup on 9202 Flash Dev.id = 22C9 Flash Bank #1: 8 MB *** Using default environment <str9100gsw.c #392> readPhyID(): Phy reg id = 0x273850E9 Begin vitesse7385 switch basic config ... <str9100gsw.c #520> h2_post_reset(): set_fatal_error(H2_GENERAL_FAILURE) <str9100gsw.c #520> h2_post_reset(): set_fatal_error(H2_GENERAL_FAILURE) done Hit any key to stop autoboot: 1  0 Now bootup on 9202 This is Boot world! the product id is : 65 52 63 4F 6D 4D the pruduct ID check OK! copy 9202 bootpImage to SDRAM,file size is 5070592 len is 5070592 done. ## Starting application at 0x01000000 ... Uncompressing Linux....................................................................... done, booting the kernel. request_standard_resources()....OK trap_init().....OK init_IRQ().....OK sched_init().....OK softirq_init().....OK time_init().....OK Linux version 2.4.27-star (root@localhost) (gcc version 2.95.3 20010315 (release)) #1 Fri Sep 17 19:47:13 CST 2010 CPU: FA526id(wb) revision 1 ICache:16KB enabled, DCache:16KB enabled, BTB support Machine: STAR_STR9100 MM: not creating mapping for 0x10000000 at 0x10000000 in user region On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/ram0 MEM=64 I-base_addr : c01d6800 IRQ Timer1 at interrupt number 0x0 and clock 125000000(Hz) console_init().....OK kmem_cache_init().....OK Calibrating delay loop... 192.10 BogoMIPS Memory: 64MB = 64MB total Memory: 58224KB available (2001K code, 436K data, 68K init) mem_init().....OK pgtable_cache_init().....OK proc_caches_init().....OK Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) vfs_caches_init().....OK Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) buffer_init().....OK Page-cache hash table entries: 16384 (order: 4, 65536 bytes) page_cache_init().....OK signals_init().....OK POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket do initcalls start Starting kswapd pty: 256 Unix98 ptys configured vitgenio: Device registered. Str9100 Serial Driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xf7800000 (irq = 10) is a Star_UART rxring.vir_addr=C4800000 rxring.phy_addr=0034A000 txring.vir_addr=C4802000 txring.phy_addr=003E4000 eth0: Switch Type: ONEARM(One Mac mode) [orn_drv_open_poll,3362] [orn_drv_open_poll,3368] [orn_drv_open_poll,3380] [orn_drv_open_poll,3397] Check MAC/PHY 0 Link Status : Check MAC/PHY 0 Link Status : UP! [orn_drv_open_poll,3422] [orn_drv_open_poll,3443] Star9100 one arm Lan Port Bridge Mode Error : PORT0 is disabled [orn_drv_open_poll,3467] [orn_drv_open_poll,3473] gsw_info.vlan[0].vlan_vid : 3292 gsw_info.vlan[1].vlan_vid : 1 [orn_drv_open_poll,3522] [orn_drv_open_poll,3529] [orn_drv_open_poll,3543] [orn_drv_open_poll,3546] eth0: STAR9100 LAN Port Initial Finished eth1: STAR9100 WAN Port Initial Finished Enable AN STAR9100 EWC Project MAC1 Initial eth2: STAR9100 EWC Port Initial Finished RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 Amd/Fujitsu Extended Query Table v1.1 at 0x0040 str9100_flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Creating 5 MTD partitions on "str9100_flash": 0x00000000-0x00020000 : "BootLoader " 0x00020000-0x00040000 : "System Configuration" 0x00040000-0x00100000 : "Signature" 0x00100000-0x00680000 : "Main CPU(9202) Kernel" 0x00680000-0x00800000 : "Wireless CPU(9109) Kernel" IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver Linux IP multicast router 0.06 plus PIM-SM klips_info:ipsec_init: KLIPS startup, Openswan KLIPS IPsec stack version: cvs2006Jan12_11:29:56 klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=251) klips_info:ipsec_alg_init: calling ipsec_alg_static_init() ipsec_aes_init(alg_type=15 alg_id=12 name=aes): ret=0 ipsec_aes_init(alg_type=14 alg_id=9 name=aes_mac): ret=0 ipsec_3des_init(alg_type=15 alg_id=3 name=3des): ret=0 netfilter PSD loaded - (c) astaro AG ipt_random match loaded NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ip6_tables: (C) 2000-2002 Netfilter core team NET4: Ethernet Bridge 008 for NET4.0 Str9100 Information inited STAR9100 Software HNAT Driver Initialed NetWinder Floating Point Emulator V0.97 (double precision) do initcalls end RAMDISK: Compressed image found at block 0 Freeing initrd memory: 3992K VFS: Mounted root (ext2 filesystem) readonly. Freeing init memory: 68K UART IRQ_ports = c023b1ac UART IRQ at interrupt number 0xa init started: BusyBox v1.00 (2010.09.17-11:43+0000) multi-call binary init started: BusyBox v1.00 (2010.09.17-11:43+0000) multi-call binary Starting pid 9, console /dev/ttyS0: '/etc/init.d/rc.sysinit' Mounting root fs rw ... Mounting other filesystems ... mount: Mounting none on /proc/bus/usb failed: No such file or directory Sysinit done Call /etc/rcS... install_isr Using /usr/sbin/push_button.o Using /lib/modules/ipt_DLOG.o Using /lib/modules/ipt_webstr.o Using /lib/modules/ipt_http_string.o Using /lib/modules/ipt_multi_match.o Using /lib/modules/ipt_multiaddr.o Using /lib/modules/ipt_httpMETHOD.o incorrect number of arguments for command eth0:star9100_gsw1000_lan_open star9100_gsw1000_lan_open Exit!! not install_itsr device eth0 entered promiscuous mode device eth2 entered promiscuous mode eth2: attempt to add interface with same source address. * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=wan_mac action=start /bin/cp /proc/uptime /tmp/var/run/rc.wan_mac.run rc starting wan_mac... /sbin/ifconfig eth1 up not install_isr * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=lan action=start /bin/cp /proc/uptime /tmp/var/run/rc.lan.run rc starting lan... /sbin/ifconfig br0 192.168.48.1 netmask 255.255.255.0 br0: port 2(eth2) entering learning state br0: port 1(eth0) entering learning state /bin/echo "lanip 192.168.48.1" >/proc/star9100_shnat_setting /bin/echo "interswitch lanip:192.168.48.1/24" >/proc/str9100/shnat iptables -t nat -I PREROUTING -i br0 -s 192.168.48.1/255.255.255.0 -d 192.168.48.1 -p tcp --dport 443 -j DNAT --to 192.168.48.1:30443 iptables -t nat -I PREROUTING -i br0 -s 192.168.48.1/255.255.255.0 -d 192.168.48.1 -p udp --dport 53 -j DNAT --to 8.8.8.8 * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=printk action=start /bin/cp /proc/uptime /tmp/var/run/rc.printk.run rc starting printk... * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=syslogd action=start /bin/cp /proc/uptime /tmp/var/run/rc.syslogd.run rc starting syslogd... /sbin/syslogd -f /etc/syslog.conf * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=httpd action=start /bin/cp /proc/uptime /tmp/var/run/rc.httpd.run rc starting httpd... /bin/ln -sf /www.eng /tmp/www /usr/sbin/mini_httpd -d /tmp/www -r "Router" -c '*.cgi' -t 1800 -i /var/run/mini_httpd.pid -a Digest -S -E /usr/sbin/certSrv.pem & bind: Address already in use * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=dhcpd action=start /bin/cp /proc/uptime /tmp/var/run/rc.dhcpd.run rc starting dhcpd... /bin/echo "1:19966144:16777215;" >/proc/vid_config /usr/sbin/udhcpd /etc/udhcpd.conf& * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=dhcp-fwd action=start /bin/cp /proc/uptime /tmp/var/run/rc.dhcp-fwd.run /bin/cp /proc/uptime /tmp/var/run/rc.dhcp-fwd.run rc starting dhcp-fwd... * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=route action=start /bin/cp /proc/uptime /tmp/var/run/rc.route.run rc starting route... * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=switch action=start /bin/cp /proc/uptime /tmp/var/run/rc.switch.run rc starting switch... /usr/sbin/switch_app & * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=natpt action=start /bin/cp /proc/uptime /tmp/var/run/rc.natpt.run /bin/cp /proc/uptime /tmp/var/run/rc.natpt.run rc starting natpt... * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=dhcp6 action=start /bin/cp /proc/uptime /tmp/var/run/rc.dhcp6.run rc starting dhcp6... * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * start wan /sbin/ifconfig eth1 up /sbin/ifconfig eth1 mtu 1500 /sbin/ifconfig eth1 xx.xx.xx.xx netmask 255.255.255.252 /sbin/route del default route: SIOC[ADD|DEL]RT: No such process /sbin/route add default gw xx.xx.xx.xx echo domain bla.org>>/etc/resolv.conf echo nameserver xxxxxx>>/etc/resolv.conf echo nameserver xxxxxx>>/etc/resolv.conf /bin/cp /proc/uptime /tmp/wan_uptime /usr/sbin/rc dhcpd create * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=dhcpd action=create /bin/cp /proc/uptime /tmp/var/run/rc.dhcpd.run /bin/echo "1:19966144:16777215;" >/proc/vid_config /usr/sbin/rc service restart * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=(null) action=restart rc ntp stop * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=ntp action=stop /bin/cp /proc/uptime /tmp/var/run/rc.ntp.run /usr/bin/killall ntp killall: ntp: no process killed route del default gw xx.xx.xx.xx /usr/sbin/fw-scripts/firewall stop .: 19: Can't open /tmp/firewall.conf /usr/bin/killall IGMPProxy killall: IGMPProxy: no process killed /usr/sbin/tc qdisc del dev br0 root RTNETLINK answers: No such file or directory /usr/sbin/tc qdisc del dev eth1 root RTNETLINK answers: No such file or directory /usr/sbin/iptables -F -t mangle iptables -t nat -I PREROUTING -i br0 -s 192.168.48.1/255.255.255.0 -d 192.168.48.1 -p tcp --dport 443 -j DNAT --to 192.168.48.1:30443 iptables -t nat -I PREROUTING -i br0 -s 192.168.48.1/255.255.255.0 -d 192.168.48.1 -p udp --dport 53 -j DNAT --to 8.8.8.8 /usr/bin/killall dhcp-fwd >/dev/null 2>&1 killall -SIGINT routed killall: routed: no process killed /usr/bin/killall syslogd killall: LicMgm: no process killed rc starting wan_basic... rc ntp start * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=ntp action=start /bin/cp /proc/uptime /tmp/var/run/rc.ntp.run rc starting ntp... /usr/sbin/ntp -z GMT1 0 28& rc dhcp6 restart * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=dhcp6 action=restart /bin/cp /proc/uptime /tmp/var/run/rc.dhcp6.run /usr/bin/killall dhcp6-serv killall: dhcp6-serv: no process killed rc starting dhcp6... route add default gw XX.XX.XX.XX dev eth1 /bin/echo "lanip 192.168.48.1" >/proc/star9100_shnat_setting /bin/echo "wanip XX.XX.XX.XX" >/proc/star9100_shnat_setting rc starting firewall... iptables -t nat -F cp /etc/crontab /etc/crontab.policy echo "vserver clean" > /proc/star9100_shnat_setting /usr/sbin/fw-scripts/firewall start iptables: Bad rule (does a matching rule exist in that chain?) /usr/sbin/ipsec spi --clear /usr/sbin/ipsec eroute --clear /usr/sbin/ipsec whack --shutdown whack: Pluto is not running (no "/var/run/pluto/pluto.ctl") /sbin/ifconfig ipsec0 down /usr/sbin/ipsec tncfg --clear /usr/sbin/iptables -D INPUT -p udp --dport 500 -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?) /usr/sbin/iptables -D INPUT -p udp --dport 4500 -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?) /usr/sbin/iptables -D INPUT -p esp -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?) /usr/sbin/iptables -t nat -D PREROUTING -p udp --dport 500 -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?) /usr/sbin/iptables -t nat -D PREROUTING -p udp --dport 4500 -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?) /usr/sbin/iptables -t nat -D PREROUTING -p esp -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?) vpn down null complete./usr/bin/killall ssl_server killall: ssl_server: no process killed gateway==[xx.xx.xx.xx] VPN parse_conf Error!! index=-1 Error Number=-3 eth1,xx.xx.xx.xx,255.255.255.252,xx.255.255.255,xx.xx.xx.xx /usr/sbin/ipsec spi --clear /usr/sbin/ipsec eroute --clear /usr/sbin/iptables -I INPUT -p udp --dport 500 -j ACCEPT /usr/sbin/iptables -I INPUT -p udp --dport 4500 -j ACCEPT /usr/sbin/iptables -I INPUT -p esp -j ACCEPT /usr/sbin/iptables -t nat -I PREROUTING -p udp --dport 500 -j ACCEPT N/usr/sbin/iptables -t nat -I PREROUTING -p udp --dport 4500 -j ACCEPT /usr/sbin/iptables -t nat -I PREROUTING -p esp -j ACCEPT /bin/echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter /usr/sbin/ipsec tncfg --attach --virtual ipsec0 --physical eth1 /sbin/ifconfig ipsec0 xx.xx.xx.xx broadcast xx.255.255.255 netmask 255.255.255.252 /usr/sbin/ipsec pluto --secretsfile /etc/ipsec.secrets --nat_traversal --debug-none --uniqueids --adns /usr/local/libexec/ipsec/_pluto_adns vpn_up_null up. /usr/sbin/ssl_server & /usr/bin/killall IGMPProxy >/dev/null 2>&1 Jan 1 00:00:34 pluto[412]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD) Jan 1 00:00:34 pluto[412]: @(#) built on Sep 17 2010:19:46:38: Jan 1 00:00:34 pluto[412]: Setting NAT-Traversal port-4500 floating to on Jan 1 00:00:34 pluto[412]: port floating activation criteria nat_t=1/port_fload=1 Jan 1 00:00:34 pluto[412]: including NAT-Traversal patch (Version 0.6c) Jan 1 00:00:34 pluto[412]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0) Jan 1 00:00:34 pluto[412]: starting up 1 cryptographic helpers Jan 1 00:00:34 pluto[412]: started helper pid=417 (fd:4) /usr/bin/killall utelnetd > /dev/null 2>&1 the function is main,the line is 94,the file is serv.c the function is main,the line is 100,the file is serv.c the function is main,the line is 104,the file is serv.c the function is main,the line is 108,the file is serv.c the function is main,the line is 111,the file is serv.c Jan 1 00:00:34 pluto[412]: Using KLIPS IPsec interface code on 2.4.27-star Jan 1 00:00:34 pluto[412]: Changing to directory '/etc/ipsec.d/cacerts' Jan 1 00:00:34 pluto[412]: Changing to directory '/etc/ipsec.d/aacerts' Jan 1 00:00:34 pluto[412]: Changing to directory '/etc/ipsec.d/ocspcerts' Jan 1 00:00:34 pluto[412]: Changing to directory '/etc/ipsec.d/crls' Jan 1 00:00:34 pluto[412]: Warning: empty directory iptables: Bad rule (does a matching rule exist in that chain?) /bin/echo "I" > /proc/led sh: cannot create /proc/led: Directory nonexistent iptables: Bad rule (does a matching rule exist in that chain?) /sbin/rmmod ip_nat_sip rmmod: ip_nat_sip: No such file or directory /sbin/rmmod ip_conntrack_sip rmmod: ip_conntrack_sip: No such file or directory start the server the user-pass is ++++++ the function is set_user_pass_to_flash,the line is 191,the file is data.c the usr_pass str is +++++ cp /etc/crontab.policy /etc/crontab iptables -F ip_filter iptables -t filter -A ip_filter -i eth1 -p udp --dport 23:23 -m state --state new -j LOG --log-prefix "[Access Log telnet attempt]D " iptables -t filter -A ip_filter -i eth1 -p tcp --dport 23:23 -m state --state new -j LOG --log-prefix "[Access Log telnet attempt]D " iptables -t filter -A ip_filter -i eth1 -p udp --dport 23:23 -j DROP iptables -t filter -A ip_filter -i eth1 -p tcp --dport 23:23 -j DROP iptables -t filter -A ip_filter -i eth1 -p udp --dport 2022:2022 -m state --state new -j LOG --log-prefix "[Access Log utelnetd external ac]D " iptables v1.2.8: Maximum prefix length 29 for --log-prefix Try `iptables -h' or 'iptables --help' for more information. the function is delete_iptables,the line is 1225,the file is data.c delete iptables demon is being on. the function is main,the line is 245,the file is serv.c i am listing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! iptables -t filter -A ip_filter -i eth1 -p tcp --dport 2022:2022 -m state --state new -j LOG --log-prefix "[Access Log utelnetd external ac]D " iptables v1.2.8: Maximum prefix length 29 for --log-prefix Try `iptables -h' or 'iptables --help' for more information. iptables -t filter -A ip_filter -i eth1 -p udp --dport 2022:2022 -j DROP iptables -t filter -A ip_filter -i eth1 -p tcp --dport 2022:2022 -j DROP iptables -I ip_filter -m state --state ESTABLISHED,RELATED -j RETURN iptables -A ip_filter -j RETURN ip link set dev eth1 multicast on rc starting dhcp-fwd... rc starting ddns... rc starting ripd... rc starting natpt... rc starting syslogd... /sbin/syslogd -f /etc/syslog.conf rc starting LicMgm... killall: LicMgm: no process killed /usr/bin/killall -SIGUSR2 udhcpd => AcquireBasicData(UDI=CA8A331185003EBFD367C8442F79081E145B18AA4BD71687794FC50468BB2C2E06DE7E) /etc/rcS: 77: /usr/sbin/wizd: not found * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=upnp action=start /bin/cp /proc/uptime /tmp/var/run/rc.upnp.run rc starting upnp... /bin/echo "lanip 192.168.48.1" >/proc/star9100_shnat_setting /bin/echo "wanip xx.xx.xx.xx" >/proc/star9100_shnat_setting /usr/bin/killall -9 upnpd killall: upnpd: no process killed route add -net 239.0.0.0 netmask 255.0.0.0 br0 /usr/sbin/upnpd eth1 br0 30 4& Using /usr/sbin/led.o * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=ips action=start /bin/cp /proc/uptime /tmp/var/run/rc.ips.run rc starting ips... Using /root/kris.o UPnP Initialized /bin/echo i1 > /proc/led kris daemon version 1.7 the function is main,the line is 94,the file is serv.c the function is main,the line is 100,the file is serv.c the function is main,the line is 104,the file is serv.c the function is main,the line is 108,the file is serv.c the function is main,the line is 111,the file is serv.c Intialized UPnP with fullurl=http://192.168.48.1:49152/gateway.xml ipaddress=192.168.48.1 port=49152 web_dir_path=/usr/upnp/ desc_doc_url=http://192.168.48.1:49152 Specifying the webserver root directory -- /usr/upnp/ Registering the RootDevice RootDevice Registered Initializing State Table fullurl http://192.168.48.1:49152/gateway.xml * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=radvd action=start /bin/cp /proc/uptime /tmp/var/run/rc.radvd.run rc starting radvd... * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=snmp action=start /bin/cp /proc/uptime /tmp/var/run/rc.snmp.run rc starting snmp... /usr/bin/killall snmp Sum=0x01BF49B9,InvSum=0xFE40B647,Result=0x00000000 killallbind: Address already in use : snmp: no process killed * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=LicMgm action=start /bin/cp /proc/uptime /tmp/var/run/rc.LicMgm.run rc starting LicMgm... Kris Rule Version 1.50 * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=http_HNAT action=start /bin/cp /proc/uptime /tmp/var/run/rc.http_HNAT.run rc starting http_HNAT... echo "table alg add sport:80" > /proc/star9100_shnat_setting => AcquireBasicData(UDI=C25EB6C5E3EFEB052D277EBFFE92D8B4EA58179F0F0884A45079B3EAA1BECF04A02438) * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=wlan action=create /bin/cp /proc/uptime /tmp/var/run/rc.wlan.run * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=wlan action=start /bin/cp /proc/uptime /tmp/var/run/rc.wlan.run rc starting wlan... /usr/sbin/sendcmd /tmp/start.sh /tmp/start.sh Send File's Name success! Send File's Data success! /usr/sbin/sendcmd /tmp/RT2860AP.dat /tmp/RT2860AP.dat Send File's Name success! Send File's Data success! /usr/sbin/sendcmd "/bin/chmod +x /tmp/start.sh" /usr/sbin/sendcmd "/tmp/start.sh" Advertisements Sent Using /lib/modules/2.4.27-star/net/rt2860ap.o Using /usr/lib/led.o Ralink DOT1X daemon, version = '2.3.0.0' Ralink DOT1X daemon, version = '2.3.0.0' /bin/brctl ipv6_dis br0 * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=sigmail action=start /bin/cp /proc/uptime /tmp/var/run/rc.sigmail.run rc starting sigmail... Donot send signature email duto no email information! * * * * * * * {~._.~} * * ( Y ) * * ()~*~() * * (_)-(_) * * * * * * ap_name=vpn_netbios action=start /bin/cp /proc/uptime /tmp/var/run/rc.vpn_netbios.run rc starting vpn_netbios... Starting pid 618, console /dev/ttyS0: '/bin/sh' BusyBox v1.00 (2010.09.17-11:43+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. #


Unmodified STR9109

ARMboot 1.1.0 (Nov 24 2008 - 14:05:27) Star maintain version 0.14.100000000 ARMboot code: 00000000 -> 0006a2e0 STR9100 CPU Clock: 250 MHz regular_reg: 3130 DDR Bank #0: 00000000 16 MB DDR Controller Data Bus Width: 16 bits Now bootup on 9109 *** Using default environment Hit any key to stop autoboot: 0 Now bootup on 9109 copy 9109 bootpImage to SDRAM,file size is 1343872 len is 1343872 done. set gpio9 to be 1 ## Starting application at 0x00d00000 ... Uncompressing Linux............................................... done, booting the kernel. request_standard_resources()....OK trap_init().....OK init_IRQ().....OK sched_init().....OK softirq_init().....OK time_init().....OK Linux version 2.4.27-star (root@localhost) (gcc version 3.3.6) #1 Fri Sep 17 19:50:17 CST 2010 CPU: FA526id(wb) revision 1 ICache:16KB enabled, DCache:16KB enabled, BTB support Machine: STAR_STR9100 MM: not creating mapping for 0x10000000 at 0x10000000 in user region On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/ram0 MEM=32 I-base_addr : c013d400 STR9100 CPU Clock: 250 MHz IRQ Timer1 at interrupt number 0x0 and clock 125000000(Hz) console_init().....OK kmem_cache_init().....OK Calibrating delay loop... 192.10 BogoMIPS Memory: 16MB = 16MB total Memory: 13992KB available (1085K code, 207K data, 224K init) mem_init().....OK pgtable_cache_init().....OK proc_caches_init().....OK Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) vfs_caches_init().....OK Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) buffer_init().....OK Page-cache hash table entries: 4096 (order: 2, 16384 bytes) page_cache_init().....OK signals_init().....OK POSIX conformance testing by UNIFIX PCI 33M PCI: bus0: Fast back to back transfers disabled pci bridge found Got resources ... name=PCI device 1814:0601 start=b0000000 end=b000ffff Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket do initcalls start Starting kswapd pty: 256 Unix98 ptys configured Str9100 Serial Driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xf7800000 (irq = 10) is a Star_UART Str9100 Real Time Clock Driver v1.20 rxring.vir_addr=C1800000 rxring.phy_addr=009BB000 txring.vir_addr=C1802000 txring.phy_addr=009AA000 eth0: Switch Type: GENERAL(Two Macs mode) eth0: STAR9100 LAN Port Initial Finished RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.7.6-k1-NAPI Copyright (c) 1999-2004 Intel Corporation. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 NetWinder Floating Point Emulator V0.97 (double precision) do initcalls end RAMDISK: Compressed image found at block 0 Freeing initrd memory: 597K VFS: Mounted root (ext2 filesystem) readonly. Freeing init memory: 224K UART IRQ_ports = c01747f8 UART IRQ at interrupt number 0xa init started: BusyBox v1.00 (2010.09.17-11:49+0000) multi-call binary init started: BusyBox v1.00 (2010.09.17-11:49+0000) multi-call binary Starting pid 9, console /dev/ttyS0: '/etc/init.d/rc.sysinit' Mounting root fs rw ... Mounting other filesystems ... insmod: ap85.o: no module by that name found =================================================== PORT0 TX : 4C020000 eth0:star9100_gsw1000_lan_open star9100_gsw1000_lan_open Exit!! install_isr device eth0 entered promiscuous mode br0: port 1(eth0) entering learning state Starting pid 28, console /dev/ttyS0: '/bin/sh' BusyBox v1.00 (2010.09.17-11:49+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. # br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating The primary RSNIE: c189223a, len = 26 0x0000 : 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 0x0010 : 00 50 f2 04 01 00 00 50 f2 02 The secondary RSNIE: c1892339, len = 24 0x0000 : 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 0x0010 : 01 00 00 0f ac 02 00 00 0x1300 = 00064380 device ra0 entered promiscuous mode br0: port 2(ra0) entering learning state Received RSNIE in Assoc-Req: c1898dbf, len = 24 0x0000 : dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 0x0010 : f2 02 01 00 00 50 f2 02 concatenation=: c0157cc8, len = 76 0x0000 : 00 1c 10 fc b7 90 00 1f 29 2a 35 48 43 98 55 0e 0x0010 : 72 0a 4b 1a 2f 4e 3e d7 01 c1 c9 a7 8d 75 13 3a 0x0020 : 78 23 e5 e3 21 16 98 d0 d6 34 ac 22 cf 12 dd f7 0x0030 : e7 02 65 9d d6 9b 73 85 60 a0 cd 2d c0 4d 00 94 0x0040 : 9d 7a 25 36 7a f7 0d 0d 0a 73 1f 09 Received RSNIE in Assoc-Req: c189beba, len = 22 0x0000 : 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 0x0010 : 00 0f ac 02 00 00 concatenation=: c0157cc8, len = 76 0x0000 : 00 1c 10 fc b7 90 ec 55 f9 c7 78 6a 60 f8 4a a7 0x0010 : 30 34 99 c7 15 21 70 29 b8 00 7a f6 0a 37 e3 c9 0x0020 : aa 46 e0 6c 6e a9 83 14 73 00 db 23 b3 ea eb 0d 0x0030 : 5e 67 fc 87 d0 bc 02 fd 93 08 b8 86 6e b7 46 0b 0x0040 : a8 1c e9 9c 26 6a d9 69 35 ca eb 3a br0: port 2(ra0) entering forwarding state br0: topology change detected, propagating


This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1