Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:belkin:f7d3302 [2015/05/06 10:42] – fix link theoradicustoh:belkin:f7d3302 [2018/03/31 23:22] – ↷ Links adapted because of a move operation bobafetthotmail
Line 1: Line 1:
 +====== Belkin F7D3302 and F7D7302 ======
  
 +Bootloader refers to `WG7016F22 1-LF-AK`
 +
 +===== Versions =====
 +^ Version/Model ^ Launch Date ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^
 +| F7D7302 v1    -  | - | WIP  | Noted on the internet as identical to the F7D3302 |
 +| F7D3302 v1    -  | - | WIP  | - |
 +
 +WIP openwrt patches: [[https://github.com/jmesmon/openwrt.git]] Branch Belkin/Update-2C
 +
 +OEM source code available at: [[http://cache-www.belkin.com/support/dl/Belkin-F7D3302-v1.00.25.tgz]]
 +
 +<WRAP box center 80%> {{:meta:icons:tango:48px-emblem-question.svg.png }} If you can **confirm** that OpenWrt is running on this device (i.e. you or someone else has **tested** it), please update the data accordingly. -> Click //View/Edit data//
 +/* Special style definitions for the various Tables of Hardware.            */
 +{{page>meta:infobox:tohstyles&noheader&nofooter&noeditbtn&inline&indent&link}}
 +---- datatable ----
 +cols    : Model, Versions, Supported Since Rev_url, Supported Since Rel, Supported Current Rel, Device Techdata_pageid
 +align   : l,c,l,c,c,c
 +filter  : Model*~F7D3302
 +----</WRAP>
 +
 +===== Hardware Highlights =====
 +^ SoC             ^ Ram     ^ Flash   ^ Network   ^ USB   ^ Serial   ^ JTag                 ^
 +| Broadcom 4718   | 64MiB   | 8MiB   | 4 x 1     | Yes   | Yes      | Probably, untested   |
 +
 +
 +===== Bootloader ====
 +Defaults to ip addr 192.168.2.1 after a nvram reset. Changing the ip in the manufacturure firmware also changes the bootloader ip.
 +
 +^ CFE version observered ^ HW rev ^
 +| 0.09e                  | F7D7302 v1     |
 +
 +===== Manuf MTD layout =====
 +<code>
 +0x00000000-0x00030000 : "boot"
 +0x00030000-0x007f0000 : "linux"
 +0x001b7bc4-0x007f0000 : "rootfs"
 +0x007f0000-0x00800000 : "nvram"
 +</code>
 +
 +==== Keep the articles modular ====
 +| Please include only model specific information, omit bla,bla and put everything generic into separate articles  |
 +| [[docs:start]] if you have no time to write certain stuff link to this |
 +| [[docs:guide-quick-start:checks_and_troubleshooting]] should lead the way, do not explain this again  |
 +| DO NOT provide a complete howto here! Instead //groom// the general HowTos.  |
 +
 +
 +===== Installation =====
 +  - → [[:downloads]]
 +  - → [[docs:guide-user:installation:generic.flashing|Install OpenWrt]]
 +  - → **»»»»here»»»»[[:downloads|Latest OpenWrt release]]««««here««««** **DO NOT PROVIDE OWN LINKS to http://downloads.openwrt.org/**
 +
 +==== Flash Layout ====
 +Please check out the article [[docs:techref:flash.layout]]. It contains an example and a couple of explanations.
 +
 +==== OEM easy installation ====
 +
 +This section deals with how you install OpenWrt from a device freshly opened.
 +
 +**Note:** Reset router to factory defaults if it has been previously configured.
 +  *Browse to http://192.168.2.1/
 +  *Select "Firmware Update" under "Utilities" in the left column
 +  *If prompted to authenticate, leave the password entry field blank and continue
 +  *Select openwrt-f7d3302-squashfs.bin
 +  *Click Update. Yes, you are sure.
 +  *Wait for it to reboot (if the WAN is disconnected, this is indicated by a switch from an orange flashing light to a green light)
 +  *Telnet to 192.168.1.1 and set a root password, or browse to http://192.168.1.1 if LuCI is installed.
 +
 +==== OEM installation using the TFTP method ====
 +
 +->  [[docs:guide-user:installation:generic.flashing.tftp]]
 +
 +=== Specific values you need ===
 +
 +| Bootloader tftp server IPv4 address | 192.168.2.1 |
 +| Bootloader MAC address (special) | FILL-IN |
 +| Firmware tftp image | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Either the one containing the model name, or the //"f7dxxxx-qa"//) |
 +| TFTP Transfer Window | (NONE, AFICT) |
 +| TFTP Window Start | approximately FILL-IN seconds after power on |
 +| TFTP Client Required IP Address | FILL-IN |
 +
 +==== Upgrading OpenWrt ====
 +->  [[docs:guide-user:installation:generic.sysupgrade]]
 +
 +If you have already installed OpenWrt and like to reflash for e.g. upgrading to a new OpenWrt version you can upgrade using the mtd command line tool. It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
 +
 +=== LuCI Web Upgrade Process ===
 +
 +  * Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
 +  * Upload image file for sysupgrade to LuCI
 +  * Wait for reboot
 +
 +=== Terminal Upgrade Process ===
 +
 +  * Login as root via SSH on 192.168.1.1
 +  * Use the following commands to upgrade.
 +
 +|WARNING: this snapshot does not yet exist|
 + 
 +<code>
 +cd /tmp/
 +wget http://http://downloads.openwrt.org/snapshots/trunk/brcm47xx/openwrt-f7d3302-squashfs.bin
 +sysupgrade /tmp/openwrt-f7d3302-squashfs.bin
 +</code>
 +
 +
 +
 +===== Basic configuration =====
 +-> [[docs:guide-quick-start:checks_and_troubleshooting|Basic configuration]] After flashing, proceed with this.\\
 +Set up your Internet connection, configure wireless, configure USB port, etc.
 +
 +
 +===== Specific Configuration =====
 +==== Interfaces ====
 +
 +The default network configuration is:
 +^ Interface Name ^ Description ^ Default configuration ^
 +| br-lan | LAN & WiFi | 192.168.1.1/24 | 
 +| vlan1 (eth0.1) | LAN ports (1 to 4) | None | 
 +| vlan2 (eth0.2) | WAN port | DHCP | 
 +| phy0 | WiFi | Disabled | 
 +
 +==== Switch Ports (for VLANs) ====
 +
 +Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.
 +
 +^ Port ^ Switch port ^
 +| CPU (internal) | 5 | 
 +| WAN   | 4 |
 +| LAN 1 | 3 | 
 +| LAN 2 | 2 | 
 +| LAN 3 | 1 | 
 +| LAN 4 | 0 | 
 +
 +==== Failsafe mode ====
 +-> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]]
 +
 +==== Buttons ====
 +
 +-> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s).
 +
 +
 +^ BUTTON ^ Event ^
 +| Reset | reset | 
 +| WPS | wps | 
 +
 +
 +===== Hardware =====
 +==== Info ====
 +| **[[wp>Instruction set]]:**               | [[wp>MIPS architecture|MIPS]] |
 +| **Vendor:**                               | [[wp>Broadcom]] |
 +| **[[docs:techref:bootloader]]:**           | [[docs:techref:bootloader:cfe]]|
 +| **[[docs:techref:hardware:soc|System-On-Chip]]:**  | BCM4718A1KFBG |
 +| **[[docs:techref:hardware:cpu|CPU]] @Frq**         | MIPS 74K V4.0 @453 MHz|
 +| **Flash size:**                 | 8MiB |
 +| **Flash Chip:**                 | ??? |
 +| **RAM size:**                   | 64MiB |
 +| **RAM Chip:**                   | EtronTech EM68B16CWPA |
 +| **Wireless No1:**               | //SoC-integrated//: Unknown Broadcom integrated IC for 2.4GHz 802.11b/g/  |
 +| **[[docs:techref:hardware:switch]]:**    | Broadcom BCM5325EKQMG (100M, VLAN)  |
 +| **USB:**                        | Yes 1 x 2.0 |
 +| **[[docs:techref:hardware:port.serial|Serial]]:**  | [[#Serial|Yes]] |
 +| **[[docs:techref:hardware:port.jtag|JTAG]]:**      | [[#JTAG|Yes]]   |
 +
 +==== Photos ====
 +Model Number
 +
 +//Front://
 +
 +**Photo of front of the casing**
 +
 +//Back://
 +
 +**Photo of back of the casing**
 +
 +==== Opening the case ====
 +**Note:** This will void your warranty!
 +
 +  * There are a number of large tabs holding the case closed
 +  * I haven't found a good way to open it, I just pryed mine rather violently.
 +
 +//Main PCB//
 +
 +{{:media:belkin:f7d7302_pcb-front.jpg?400|}}
 +
 +
 +==== Serial ====
 +-> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
 +
 +How to connect to the Serial Port of this specific device:
 +
 +  * Look for a set of 4 pins labeled "J3" next to a large JTAG connector labeled "J2"
 +  * On my board, the headers of J3 were already populated
 +  * Pinout:
 +    - 3.3v
 +    - Tx (from router to computer)
 +    - Rx (from computer to router)
 +    - GND
 +
 +{{:media:belkin:f7d7302_serial-port-marked.jpg?400|}}
 +
 +==== JTAG ====
 +-> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
 +
 +How to connect to the JTAG Port of this specific device:
 +
 +**Photo of PCB with markings**
 +
 +
 +===== Debricking =====
 +-> [[docs:guide-user:troubleshooting:generic.debrick]]
 +
 +On the serial console:
 +<code>
 +flash -noheader : flash1.trx
 +</code>
 +
 +Imediately after that is entered, on a computer connected to the first lan port (check other ports for functionality), and with the ip address configured to 192.168.2.8
 +<code>
 +curl -T openwrt-f7d3302-squashfs.trx tftp://192.168.2.1
 +</code>
 +
 +=== CFE Bootloader Webserver ===
 +It is also technically possible to use the CFE bootloader webserver to upload a new flash image, but there have been quite alot of people that say it doesn't work, even though it works for me.
 +
 +Configure your computer to have a static address of 192.168.2.8 (This can change based on what it is set in the Manafacturers software, default is 192.168.2.1)\\ 
 +Power the router off\\ 
 +Hold the reset button while plugging the power in, keep the reset button pushed for 10 seconds\\ 
 +Go to 192.168.2.1 in your browser and upload your firmware file\\ 
 +
 +
 +
 +===== Bootloader Mods =====
 +  - you could read about [[docs:techref:bootloader]] in general
 +
 +===== Hardware mods =====
 +  - as a beginner, you really should inform yourself about [[docs:techref:hardware:soldering]] in general and then obtain some practical experience!
 +
 +
 +==== Add a second USB port ====
 +
 +Yes, definitely can. Kernel enumerates 2 usb ports, and pads exist on the board. Unsolder the 1 USB port, and solder in a dual USB port.\\ 
 + To install properly you will need a fuse and a inductor and a couple resistors, but I just soldered the two outer pins (the power pins) together so both ports feed off of the same power circuit, and had to solder a couple pads together on the data lines where the other USB port just uses two 0 Ohm links. Don't blame me if you try this and you fry something though.\\ 
 +If you do this you will have to make the USB port hole in the case twice as tall. I used a heat knife and cut it out. 
 +
 +{{media:belkin:f7d3302_add_2nd_usb.jpg?400|}}
 +
 +
 +
 +
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +<WRAP bootlog>
 +<nowiki>Decompressing...done
 +Decompressing...done
 +Init Arena
 +Init Devs.
 +Boot partition size = 131072(0x20000)
 +et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0
 +CPU type 0x19740: 453MHz
 +Tot mem: 65536 KBytes
 +
 +CFE mem:    0x80700000 - 0x8079B620 (636448)
 +Data:       0x807326D0 - 0x80734A80 (9136)
 +BSS:        0x80734A80 - 0x80735620 (2976)
 +Heap:       0x80735620 - 0x80799620 (409600)
 +Stack:      0x80799620 - 0x8079B620 (8192)
 +Text:       0x80700000 - 0x807326C4 (206532)
 +
 +
 +Copying boot params.....
 +DONE
 +
 +
 +Bootloader version 0.09e boot_version 0.09e
 +Project name : WG7016F22 1-LF-AK
 +Press space bar to cancel startup...
 +Device eth0:  hwaddr 94-44-52-B9-7E-2B, ipaddr 192.168.1.102, mask 255.255.255.0
 +        gateway not set, nameserver not set
 +Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
 +Loading: ....... 4165296 bytes read
 +Entry at 0x80001000
 +Closing network.
 +Starting program at 0x80001000
 +Linux version 2.6.22 (andrew_chen@SW3SRV2.arcadyan.com.tw) (gcc version 4.1.2) #6 Mon Aug 30 19:36:15 CST 2010
 +CPU revision is: 00019740
 +Found chip type AI (0x19a14716)
 +Chipc: rev 31, caps 0x184807c9, chipst 0x9400 pmurev 5, pmucaps 0x11242c05
 +No PLL init done for chip 4716 rev 1 pmurev 5
 +si_kattach done. ccrev = 31, wd_msticks = 32
 +Determined physical RAM map:
 + memory: 04000000 @ 00000000 (usable)
 +Built 1 zonelists.  Total pages: 16256
 +Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit
 +Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
 +Primary data cache 32kB, 4-way, linesize 32 bytes.
 +Synthesized TLB refill handler (20 instructions).
 +Synthesized TLB load handler fastpath (32 instructions).
 +Synthesized TLB store handler fastpath (32 instructions).
 +Synthesized TLB modify handler fastpath (31 instructions).
 +PID hash table entries: 256 (order: 8, 1024 bytes)
 +CPU: BCM4716 rev 1 at 453 MHz
 +Using 226.500 MHz high precision timer.
 +Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 +Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Memory: 60664k/65536k available (2805k kernel code, 4812k reserved, 1126k data, 132k init, 0k highmem)
 +Mount-cache hash table entries: 512
 +NET: Registered protocol family 16
 +SCSI subsystem initialized
 +usbcore: registered new interface driver usbfs
 +usbcore: registered new interface driver hub
 +usbcore: registered new device driver usb
 +PCI: Using membase 8000000
 +PCI: Initializing host
 +PCI: Reset RC
 +PCI: Fixing up bus 0
 +PCI: Fixing up bridge
 +PCI: Fixing up bridge
 +PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
 +PCI: Fixing up bus 1
 +Time: MIPS clocksource has been installed.
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 2048 (order: 2, 16384 bytes)
 +TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
 +TCP: Hash tables configured (established 2048 bind 2048)
 +TCP reno registered
 +gpio_init 478
 +VFS: Disk quotas dquot_6.5.1
 +Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
 +squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
 +fuse init (API version 7.8)
 +io scheduler noop registered (default)
 +Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
 +serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
 +loop: module loaded
 +PPP generic driver version 2.4.2
 +PPP MPPE Compression module registered
 +NET: Registered protocol family 24
 +Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank
 + Amd/Fujitsu Extended Query Table at 0x0040
 +number of CFI chips: 1
 +cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
 +Flash device: 0x800000 at 0x1c000000
 +Physically mapped flash: squash filesystem with lzma found at block 1758
 +Creating 4 MTD partitions on "Physically mapped flash":
 +0x00000000-0x00030000 : "boot"
 +0x00030000-0x007f0000 : "linux"
 +0x001b7bc4-0x007f0000 : "rootfs"
 +0x007f0000-0x00800000 : "nvram"
 +Found a 0MB  serial flash
 +sflash: found no supported devices
 +usbmon: debugfs is not available
 +GACT probability on
 +Mirror/redirect action on
 +u32 classifier
 +    input device check on 
 +    Actions configured 
 +Netfilter messages via NETLINK v0.30.
 +nf_conntrack version 0.5.0 (512 buckets, 4096 max)
 +ctnetlink v0.93: registering with nfnetlink.
 +BCM fast NAT: INIT
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +ClusterIP Version 0.8 loaded successfully
 +arp_tables: (C) 2002 David S. Miller
 +TCP cubic registered
 +NET: Registered protocol family 1
 +NET: Registered protocol family 10
 +IPv6 over IPv4 tunneling driver
 +NET: Registered protocol family 17
 +Ebtables v2.0 registered
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
 +All bugs added by David S. Miller <davem@redhat.com>
 +VFS: Mounted root (squashfs filesystem) readonly.
 +Freeing unused kernel memory: 132k freed
 +Warning: unable to open an initial console.
 +Algorithmics/MIPS FPU Emulator v1.5
 +[sighandler]: No more events to be processed, quitting.
 +[cleanup]: Waiting for children.
 +[cleanup]: All children terminated.
 +Hit enter to continue...waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +vlan2: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Operation not supported
 +eth1: Invalid argument
 +eth1: Invalid argument
 +eth1: Operation not supported
 +eth1: Invalid argument
 +eth1: Invalid argument
 +waitpid: No child processes
 +waitpid: No child processes
 +brctl: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +waitpid: No child processes
 +HTTPD: main(963) 
 +udhcpd_main(138): udhcp server (v0.9.8) started
 +UPnP daemon is ready to run
 +Reaped 317
 +killall: wps_monitor: no process killed
 +waitpid: No child processes
 +killall: wps_ap: no process killed
 +killall: wps_enr: no process killed
 +mkdir: cannot create directory '/tmp/mnt': File exists
 +mkdir: cannot create directory '/tmp/etc': File exists
 +mkdir: cannot create directory '/tmp/etc/sysconfig': File exists
 +Starting HotPlug:                       /usr/sbin/hotplugd -D -f
 +Starting jcpd daemon:                   /usr/sbin/jcpd
 +
 +share memory key=74565 successful id on creating=32769
 +sh: /usr/sbin/httpd_watchdog: not found
 +original zone=GMT+8
 +modified dst=GMT
 +[start_wan 1136], ifconfig vlan1 up
 +vlan1: Operation not supported
 +waitpid: No child processes
 +waitpid: No child processes
 +udhcpc_main(438): udhcp client (v0.9.8) started
 +original zone=GMT+8
 +modified dst=GMT
 +vlan1 dhcp
 +vlan1: No such process
 +Stop DDNS service!
 +Hit enter to continue...connect: Network is unreachable
 +Hit enter to continue...Starting Samba:                         /usr/sbin/smbd -D
 +                                        /usr/sbin/nmbd -D
 +Setting SSID "belkin.4e4b"
 +main(1152) wl -i eth1 ssid -C 11 belkin.4e4b
 +
 +start_wl(994) reStart the Wireless, lan_ifNames=vlan2 eth1  
 +start_wl(1031), name=vlan2
 +start_wl(1031), name=eth1
 +Starting sxuptpd
 +Initializing USB port mode:
 + port1 = NAS
 + port2 = NAS
 +Starting usbjcpd
 +Hit enter to continue...original zone=GMT+8
 +modified dst=GMT
 +Portrd: Add iptable command:
 +iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o vlan1 -j MASQUERADE
 +iptables -t nat -A POSTROUTING -s 192.168.169.0/24 -o vlan1 -j MASQUERADE
 +Hit enter to continue...</nowiki>
 +</WRAP>\\
 +
 +Hitting enter drops to BusyBox v1.7.2 (2010-08-30 20:06:26 CST)
 +
 +==== NVRAM dump ====
 +<WRAP bootlog>
 +<nowiki>Terminal ready
 +nvram show
 +sb/1/ofdm2gpo=0x44444444
 +wl_radius_port=1812
 +auto_mode_5g=1
 +wan_unit=0
 +wl0_wmf_bss_enable=1
 +wan0_primary=1
 +pci/1/1/mcs5gpo0=0x0
 +pci/1/1/stbcpo=0
 +wan_route=
 +ses_wds_mode=1
 +wl0_frameburst=on
 +pci/1/1/mcs5gpo1=0x0
 +wl_txstreams=0
 +access_control_enabled=0
 +pci/1/1/mcs5gpo2=0x0
 +pci/1/1/maxp5gha0=0x32
 +wan_pppoe_keepalive=0
 +wan_pptp_ip=
 +filter_client_url0=
 +health_week=0
 +wan0_ipaddr=1.0.0.1
 +pci/1/1/mcs5gpo3=0x0
 +pci/1/1/maxp5gha1=0x32
 +log_ipaddr=
 +wan0_proto=dhcp
 +boardrev=0x1102
 +br0_ifnames=vlan2 eth1
 +wl0.14_hwaddr=96:44:52:B9:7E:29
 +pci/1/1/aa5g=0x3
 +wl_nctrlsb=lower
 +wan0_pptp_dhcp=dhcp
 +sb/1/mcs2gpo0=0x6666
 +wl_version=5.10.128.0
 +wl0_leddc=0x640000
 +et0macaddr=94:44:52:B9:7E:2B
 +sb/1/mcs2gpo1=0x6666
 +ddns_enable=disabled
 +sb/1/mcs2gpo2=0x6666
 +sb/1/mcs2gpo3=0x6666
 +wl0_akm=psk psk2 
 +wl0_radarthrs=0 0x6a8 0x6c8 0x6ac 0x6c7
 +pci/1/1/pa5glw2a0=0xfa8e
 +sb/1/mcs2gpo4=0x6666
 +wan_pppoe_passwd=
 +wl_maxassoc=128
 +health_days=0 0 1 0 0 0 0 
 +wl0_guest_mode=0
 +wan0_dns=12.213.224.61 
 +watchdog=3000
 +boot_wait=on
 +pci/1/1/pa5glw2a1=0xfabc
 +sb/1/mcs2gpo5=0x6666
 +sb/1/mcs2gpo6=0x6666
 +wps_modelname=F7D7302 v1
 +wl_phytypes=
 +wl_leddc=0x640000
 +wl0_infra=1
 +sb/1/mcs2gpo7=0x6666
 +bt_autoDelTorrent=1
 +wl0_country_code=US
 +fw_disable=0
 +dhcp_client_list_num=0
 +emf_rtport_entry=
 +bt_autoRateControl=1
 +wps_config_command=0
 +gs_remote_mgmt=0
 +gs_dmzEnable=0
 +gui_version=1.00.23
 +ddns_wildcard=
 +wl_infra=1
 +reset_gpio=6
 +ses_event=2
 +ddns_server=0
 +wan0_bigpond_passwd=
 +wl0_bcn_rotate=1
 +pmon_ver=CFE 5.10.128.0
 +bw_maxTx=100000000
 +restore_defaults=0
 +wan0_ifname=vlan1
 +vlan2ports=0 1 2 3 5*
 +health_enable=1
 +wl0.1_hwaddr=96:44:52:B9:7E:2C
 +schedule_reboot_status=0
 +wan0_pptp_demand=0
 +wl0_wme_sta_be=15 1023 3 0 0 off off
 +wl0_nctrlsb=lower
 +pci/1/1/cddpo=0
 +wan_lease=86400
 +wan_pppoe_service=
 +wl0_version=5.10.128.0
 +sb/1/triso2g=3
 +wl_wme_apsd=on
 +sb/1/sromrev=8
 +http_wanport=8080
 +wl_radius_ipaddr=
 +ddns_hostname=
 +eco_wlan_start=0
 +wl0.7_hwaddr=96:44:52:B9:7E:22
 +lan_gateway=192.168.1.102
 +wl0_ifname=eth1
 +dst_time_zone=GMT
 +lan_domain=Belkin
 +wl0_wme_sta_bk=15 1023 7 0 0 off off
 +timer_interval=3600
 +dhcp_reserveIndex=0
 +pci/1/1/ag1=2
 +wan_bigpond_sindex=0
 +bt_autoHideMode=1
 +lan1_ipaddr=192.168.169.1
 +forward_port0=
 +wl_net_reauth=900
 +wl0_rxstreams=0
 +gpio4=robo_reset
 +ses_enable=1
 +obscurePSK_guest=1
 +wan_pppoe_mru=1492
 +health_time=7
 +lan_route=
 +wl0_mrate=0
 +wps_device_pin=08890948
 +gpio8=wps_button
 +time_zone_index=4
 +wl1_channel=0
 +wps_hw_enable=1
 +wl0_mode=ap
 +pci/1/1/pa5gw2a0=0xFAFA
 +wan_gateway=1.0.0.1
 +reboot_from_self_healing=1
 +serial=0
 +pci/1/1/pa5gw2a1=0xFAAA
 +sb/1/pa2gw2a0=0xFACB
 +dhcp_start=192.168.1.2
 +sb/1/pa2gw2a1=0xFAB8
 +wl0_ap_isolate=0
 +lan1_route=
 +dlna_backup_ignore=0
 +pci/1/1/pa5ghw2a0=0xfac3
 +dhcp_end=192.168.1.100
 +wl_mrate=0
 +wan_bigpond_enable=0
 +wan0_pptp_subnet=
 +pci/1/1/pa5ghw2a1=0xFAC3
 +sb/1/itt2ga0=0x20
 +wl_wmf_bss_enable=1
 +wl_akm=psk psk2 
 +wps_get_stauts=0
 +wl0.15_hwaddr=96:44:52:B9:7E:2A
 +wl0_wme_no_ack=off
 +wl0_ampdu=auto
 +wl0_gmode=1
 +sb/1/itt2ga1=0x20
 +login_timeout=10
 +eco_led_dim=1
 +boardtype=0xa4cf
 +is_default=0
 +wl_wme_bss_disable=0
 +wl_ampdu_rr_rtylimit_tid=2 2 2 2 2 2 2 2
 +wl0_nband=2
 +wan0_bigpond_srver=
 +wl_gmode=1
 +wl_ampdu=auto
 +wps_uuid=5A18F382E1326BD3A4C3247B66DE83ED
 +ddns_password=
 +stats_server=
 +pci/1/1/itt5ga0=0x3e
 +pci/1/1/rxchain=3
 +eco_wlan=0
 +bw_peekTx=125000000
 +wl0_nreqd=
 +pci/1/1/itt5ga1=0x3e
 +lan_netmask=255.255.255.0
 +wps_enr_mode=disabled
 +wl0_wme_txp_be=7 3 4 2 0
 +lan1_ifname=br1
 +wan_pptp_demand=0
 +wl_nband=2
 +wl0_dtim=3
 +wl0_ssid=belkin.4e4b
 +lan1_hwnames=
 +wan_pptp_hostname=
 +http_username=
 +wl_wme_sta_vi=7 15 2 6016 3008 off off
 +wan0_pppoe_ifname=
 +pci/1/1/maxp5ga0=0x32
 +wl_nreqd=
 +wl_wme_ap_be=15 63 3 0 0 off off
 +wan_bigpond_user_name=
 +wl0_dfs_preism=60
 +pci/1/1/maxp5ga1=0x32
 +os_date=Aug 30 2010
 +lan_ap_ipaddr=192.168.2.254
 +sb/1/regrev=97
 +access_control_member0=
 +wl0_wme_txp_bk=7 3 4 2 0
 +pci/1/1/ofdm5gpo0=0x0
 +sb/1/ag0=2
 +http_lanport=80
 +pci/1/1/ofdm5gpo1=0x0
 +pci/1/1/pdetrange5g=4
 +sb/1/ag1=2
 +wl_plcphdr=long
 +wl_wme_sta_vo=3 7 2 3264 1504 off off
 +landing_password=
 +lan1_wins=
 +wl_macmode=disabled
 +wl_mimo_preamble=
 +nvram_version=1
 +wan_hwname=
 +wan_domain=
 +wl_wme_ap_bk=15 1023 7 0 0 off off
 +wl0_key1=
 +wan0_pptp_enable=0
 +lan_lease=-1
 +wan_netmask=255.0.0.0
 +wl_phytype=n
 +wl0_vlan_prio_mode=off
 +wl0_key2=
 +wan0_hostname=
 +wl_lazywds=0
 +wl0.2_hwaddr=96:44:52:B9:7E:2D
 +wl0_key3=
 +wl_dfs_postism=60
 +wl0_key4=
 +filter_client0=
 +wps_default_pin=08890948
 +lan1_lease=86400
 +filter_maclist=
 +pci/1/1/boardflags=0x200
 +wl_auth_mode=none
 +wl0.8_hwaddr=96:44:52:B9:7E:23
 +vlan2hwname=et0
 +wan_pptp_subnet=
 +wl0_bridge=
 +wl0_hw_rxchain=3
 +pci/1/1/pa5glw1a0=0x1637
 +http_passwd=
 +wl_wpa_psk=d4e9764a
 +wl_guest_passwd=a96d4e6d47
 +pci/1/1/pa5glw1a1=0x1591
 +sb/1/extpagain2g=2
 +bt_torrentFolder=torrent
 +lan_stp=1
 +wan_pppoe_demand=0
 +nat_type=cone
 +wl0_wme_ap_vi=7 15 1 6016 3008 off off
 +wan0_pptp_idletime=5
 +wl0_bss_maxassoc=128
 +wl_mode=ap
 +igmp_proxy_func=1
 +wan0_pppoe_passwd=
 +gs_sku_id=51
 +wl0_tpc_db=
 +wl0_plcphdr=long
 +wl0_rate=0
 +wl0_closed=0
 +wan_pptp_gateway=
 +wl0.10_hwaddr=96:44:52:B9:7E:25
 +wl0_macmode=disabled
 +xtalfreq=20000
 +wan_dns_auto=1
 +wl_wpa_gtk_rekey=0
 +wl0_wme_ap_vo=3 7 1 3264 1504 off off
 +wl0_radioids=BCM2056
 +wan0_pptp_ip=
 +sb/1/stbcpo=0
 +lan_dhcp=0
 +wps_unconfig_addenr=0
 +wl0_phytype=n
 +wl_wme_txp_vi=7 3 4 2 0
 +qos_1=0
 +wl0_lazywds=0
 +qos_2=1
 +qos_3=2
 +usb_mounted_nodes=
 +qos_4=3
 +wps_proc_status=0
 +wan0_pppoe_keepalive=0
 +boardflags2=0x1402
 +sb/1/bwduppo=0
 +sb/1/aa2g=3
 +wl0_afterburner=off
 +sb/1/txchain=3
 +wl_wme_txp_vo=7 3 4 2 0
 +wl0_antdiv=-1
 +lan_hwaddr=94:44:52:B9:7E:2B
 +wl_wds_timeout=1
 +ddns_started=0
 +wan_dns=
 +filter_client_srv0=
 +wl_wps_mode=enabled
 +wan0_pppoe_ac=
 +pci/1/1/bw40po=0
 +wan_pptp_enable=0
 +wl_ssid=belkin.4e4b
 +wl_dtim=3
 +project_id=00n2
 +wl0_wpa_psk=d4e9764a
 +pci/1/1/sromrev=8
 +wan_pppoe_mtu=1454
 +wl_radarthrs=0 0x6a8 0x6c8 0x6ac 0x6c7
 +ac_schedule0=inactive
 +wait_time=3
 +bt_autoHideSec=86400
 +ac_schedule1=inactive
 +wan0_pppoe_ip=0.0.0.0
 +ac_schedule2=inactive
 +gs_silex=1
 +wl0_amsdu=auto
 +wan0_pptp_username=
 +ac_schedule3=inactive
 +wan0_pppoe_dhcp=dhcp
 +bt_torrentDLimit=50
 +ac_schedule4=inactive
 +dhcp_wins=wan
 +ac_schedule5=inactive
 +os_server=
 +ac_schedule6=inactive
 +check_health=1
 +ac_schedule7=inactive
 +pci/1/1/pa5gw1a0=0x143B
 +wan_proto=dhcp
 +wan_pptp_serviceip=
 +wl_key1=
 +wl_amsdu=auto
 +ac_schedule8=inactive
 +pci/1/1/pa5gw1a1=0x1664
 +sb/1/pa2gw1a0=0x15A4
 +wl_key2=
 +ac_schedule9=inactive
 +wl0_unit=0
 +wan0_pppoe_mru=1492
 +sb/1/pa2gw1a1=0x1639
 +wl_key3=
 +wl_country_code=US
 +wl_key4=
 +pci/1/1/pa5ghw1a0=0x16be
 +wl_hwaddr=
 +wl0.3_hwaddr=96:44:52:B9:7E:2E
 +pci/1/1/pa5ghw1a1=0x16BE
 +wl_rxchain=3
 +wl0_net_reauth=900
 +wl0_bss_enabled=0
 +sb/1/boardflags2=0x1402
 +wl_vlan_prio_mode=off
 +remote_mgmt_enabled=0
 +wps_count=0
 +gs_wftp_enabled=0
 +bt_torrentExitHour=1
 +wl0_nmode=-1
 +lan1_stp=1
 +wps_timeout_enable=0
 +wl0.9_hwaddr=96:44:52:B9:7E:24
 +board_version=01
 +wan_pppoe_idletime=5
 +wps_restart=0
 +wan0_bigpond_sindex=0
 +wl_nmode=-1
 +gs_domainName=Belkin
 +bt_torrentULimit=20
 +lan1_gateway=192.168.169.1
 +remote_mgmt_ip=
 +serial_number=121037G3118844
 +wl_rxstreams=0
 +ses_cl_enable=1
 +wl_wps_reg=enabled
 +wl0_wds=
 +wl_rate=0
 +wan0_gateway=72.173.128.1 
 +log_level=0
 +wl0_reg_mode=off
 +ntp_server=192.43.244.18 192.5.41.41 133.100.9.2
 +wan_hwaddr=
 +wps_mfstring=Belkin International
 +wl0.11_hwaddr=96:44:52:B9:7E:26
 +wan0_bigpond_enable=0
 +lan_ifnames=vlan2 eth1 
 +bandwidth_var_5=1
 +first_bootup=0
 +qosname1=Voice Device
 +wl0_radius_port=1812
 +wl0_wme=on
 +wl0_auth=0
 +access_control_need_update=0
 +wan_bigpond_srver=
 +qosname2=Online Games
 +qosname3=Video
 +wl0_rxchain=3
 +wl0_radius_ipaddr=
 +wl0_wme_bss_disable=0
 +qosname4=Default
 +wl0_wme_sta_vi=7 15 2 6016 3008 off off
 +pci/1/1/boardflags2=0x0
 +ure_disable=1
 +sb/1/boardflags=0x310
 +wan_pppoe_username=
 +sb/1/leddc=0xffff
 +wan_ifnames=vlan1 
 +wl0_wme_sta_vo=3 7 2 3264 1504 off off
 +wan0_domain=wildblue.com
 +wan0_hwname=
 +pci/1/1/ledbh0=0
 +wl_rateset=12
 +wl_crypto=aes
 +pci/1/1/ledbh1=0xffff
 +wan_pptp_connect_id=0
 +pci/1/1/pa5glw0a0=0xfe87
 +pci/1/1/ledbh2=0xffff
 +wl_guest_timeout=720
 +wl0_wps_reg=enabled
 +pci/1/1/pa5glw0a1=0xfe9a
 +pci/1/1/ledbh3=0xffff
 +eco_mode=0
 +lan_ipaddr=192.168.1.102
 +clkfreq=453,226,113
 +os_name=linux
 +lan_proto=static
 +wl_radius_key=
 +allow_remote_ip=1
 +wl0_maxassoc=128
 +vlan1hwname=et0
 +lan1_netmask=255.255.255.0
 +wan0_route=
 +wl_unit=0
 +wan_bigpond_manual=0
 +wl0_phytypes=n
 +wan0_pppoe_demand=0
 +wl0_frag=2346
 +wl0_wep=disabled
 +wps_button_assertlvl=0
 +router_disable=0
 +lan1_proto=dhcp
 +filter_client_sch0=
 +wl_nmode_protection=off
 +wps_sta_pin=00000000
 +wan0_netmask=255.255.254.0 
 +ddns_username=
 +wl0.4_hwaddr=96:44:52:B9:7E:2F
 +wl0_rifs=
 +wan0_pptp_gateway=
 +pci/1/1/antswctl2g=0
 +sdram_config=0x184
 +gs_apMode=0
 +wan0_wins=127.0.0.1 
 +vlan1ports=4 5*
 +dmz_ipaddr=
 +wl_wds=
 +wl_5G=0
 +wan_pptp_idletime=5
 +wps_pinfail=0
 +wps_ui_dopinpbc=0
 +cancel_reboot=0
 +wl0_ampdu_rr_rtylimit_tid=2 2 2 2 2 2 2 2
 +wl0_rateset=12
 +pci/1/1/bwduppo=0
 +wl0.1_ssid=belkin.4e4b.guests
 +wl0_ure=
 +loader_version=0.09e
 +pci/1/1/txchain=3
 +wl0_wme_apsd=on
 +eco_mode_started=0
 +sb/1/macaddr=94:44:52:B9:7E:2B
 +wl0_wme_txp_vi=7 3 4 2 0
 +sb/1/ccode=US
 +wl0_txstreams=0
 +wl_wme=on
 +pci/1/1/antswitch=0
 +lan_ifname=br0
 +wan_primary=0
 +wl_wme_ap_vi=7 15 1 6016 3008 off off
 +ht_remote_ip=192.168.1.1
 +wl0_mimo_preamble=
 +boardflags=0x310
 +wan0_pptp_server_name=
 +wan0_pppoe_mtu=1454
 +wandevs=vlan1
 +sdram_refresh=0x1d38
 +wl0_wme_txp_vo=7 3 4 2 0
 +sb/1/cck2gpo=0
 +dhcp_domain=wan
 +wl0.12_hwaddr=96:44:52:B9:7E:27
 +wl_auth=0
 +vuze_task_num=0
 +wps_proc_mac=
 +pci/1/1/pa5gw0a0=0xFEAF
 +sdram_ncdl=0x6e000027
 +pci/1/1/pa5gw0a1=0xFEC6
 +sb/1/pa2gw0a0=0xFE98
 +lan1_domain=
 +wl_wme_ap_vo=3 7 1 3264 1504 off off
 +sb/1/pa2gw0a1=0xFE9E
 +hardware_version=F7D7302 v1
 +default_wan_macaddr=94:44:52:B9:7E:2C
 +hw_version=0B
 +ezc_enable=1
 +wl_frameburst=on
 +wl_bss_maxassoc=128
 +lang_code=0
 +wl0_nmode_protection=off
 +wan0_lease=43200 
 +pci/1/1/pa5ghw0a0=0xfef3
 +pci/1/1/pa5ghw0a1=0xFEF3
 +wan_pppoe_dhcp=dhcp
 +is_modified=0
 +wan_ipaddr=1.0.0.1
 +wan_pptp_username=
 +gs_samba_enabled=1
 +vuze_vod_active=0
 +wl0_rts=2347
 +time_zone_DST=1
 +sb/1/bw40po=0
 +sb/1/devid=0x4329
 +lan1_dhcp=0
 +wan_wins=
 +wl_ifname=
 +check_wifi=1
 +pci/1/1/leddc=0xffff
 +wl_wep=disabled
 +wl_nbw_cap=1
 +wl_ampdu_rtylimit_tid=5 5 5 5 5 5 5 5
 +gs_remote_mgmt_port=8080
 +wl0_hw_txchain=3
 +lan_ap_netmask=255.255.255.0
 +wps_show_status=10
 +os_version=1.00.23
 +wl_guest_mode=0
 +wl_gmode_protection=
 +wan0_pptp_ifname=ppp0
 +wl0_wpa_gtk_rekey=0
 +pci/1/1/triso5g=3
 +wan_pptp_dhcp=dhcp
 +wan_pptp_server_name=
 +wan_bigpond_passwd=
 +wl0_sta_retry_time=5
 +bt_torrentTimeout=60
 +wan0_desc=Default Connection
 +wan0_pptp_serviceip=
 +pci/1/1/extpagain5g=2
 +wl_frag=2346
 +wl_preauth=
 +wl0_key=1
 +ses_cl_event=0
 +filter_macmode=disabled
 +wl_maclist=
 +wps_addER=0
 +emf_entry=
 +wl_rifs=
 +et0phyaddr=30
 +console_loglevel=1
 +dhcp_reserveIP=
 +wl_ure=
 +wl0.5_hwaddr=96:44:52:B9:7E:20
 +bl_version=1.0.37.01
 +time_zone=GMT+8
 +filter_client_key0=
 +wl_bcn_rotate=1
 +wl_wps_config_state=1
 +wan0_pppoe_service=
 +wan0_pppoe_idletime=5
 +wan_ifname=vlan1
 +wan0_dns_auto=1
 +wl_wme_sta_be=15 1023 3 0 0 off off
 +wan0_hwaddr=94:44:52:B9:7E:2C
 +sb/1/pdetrange2g=2
 +wl_radioids=
 +wl0_dfs_postism=60
 +landevs=vlan2 wl0 wl1
 +wan_hostname=F7D7302 v1
 +wl0_radio=0
 +dhcp1_start=192.168.169.2
 +wl_corerev=
 +wl_nmcsidx=-1
 +wl0_nbw_cap=1
 +wl0.1_wpa_psk=
 +dhcp_reserveRemoveId=0
 +wl_channel=0
 +wl0_bcn=100
 +wps_mode=enabled
 +wl_wme_sta_bk=15 1023 7 0 0 off off
 +wps_currentband=
 +gs_fw_auto=0
 +gs_usb_enabled=1
 +wl0_hwaddr=94:44:52:B9:7E:2B
 +wl_radio=0
 +wl_afterburner=off
 +ddns_timeout=
 +wan0_pptp_passwd=
 +pci/1/1/ccode=0
 +wl0_ampdu_rtylimit_tid=5 5 5 5 5 5 5 5
 +wl0_preauth=
 +sb/1/tssipos2g=1
 +ezc_version=2
 +emf_enable=1
 +wl0_gmode_protection=
 +wl0.13_hwaddr=96:44:52:B9:7E:28
 +wan0_bigpond_user_name=
 +bw_maxRx=100000000
 +wl0_maclist=
 +bt_torrentExitRatio=0.75
 +sdram_init=0x0419
 +wl_rts=2347
 +log_ram_enable=1
 +firewall_version=1.3.8
 +sb/1/antswctl2g=2
 +lan_wins=
 +wan_pptp_ifname=ppp0
 +wan_desc=
 +wl_ap_isolate=0
 +bt_contentFolder=download
 +wps_modelnum=1.00.23
 +lan_hwnames=
 +wps_method=1
 +lan1_ifnames=wl0.1 wl0.2 wl0.3 wl1.1 wl1.2 wl1.3
 +qos1=Voice Device
 +wl_txchain=3
 +dhcp1_end=192.168.169.100
 +wl_wme_no_ack=off
 +qos2=Online Games
 +lan_upnp_wfa_subc_num=0
 +wl0_5G=0
 +wan0_unit=0
 +wan0_pppoe_username=
 +remote_auto_fw=0
 +qos3=Video
 +wl0_wps_config_state=1
 +wl0_radius_key=
 +qos4=Default
 +wl0_wme_ap_be=15 63 3 0 0 off off
 +wl0_nmcsidx=-1
 +wl0_corerev=17
 +wan0_ifnames=vlan1 
 +bw_qos_changed=0
 +bigpond_started=0
 +wl_key=1
 +obscurePSK=1
 +pci/1/1/regrev=0
 +wl0_channel=0
 +wps_aplockdown=0
 +wl0_wds_timeout=1
 +pci/1/1/tssipos5g=1
 +sb/1/ledbh0=0
 +wps_device_name=Share N300 Wireless N Router
 +eco_wlan_end=48
 +schedule_reboot_time=255
 +wl0.1_bss_enabled=0
 +sb/1/maxp2ga0=0x46
 +sb/1/ledbh1=0
 +wl_bridge=
 +wl0_wme_ap_bk=15 1023 7 0 0 off off
 +wl0_wps_mode=enabled
 +pci/1/1/devid=0x432d
 +sb/1/maxp2ga1=0x46
 +sb/1/ledbh2=0
 +upnp_enable=1
 +wl_bss_enabled=0
 +wan0_pptp_connect_id=0
 +wan0_pptp_hostname=
 +sb/1/ledbh3=0
 +wps_config_method=0x84
 +wl_wme_txp_be=7 3 4 2 0
 +gs_login_timeout=10
 +wan_pppoe_ac=
 +gs_remote_mgmt_ip=192.168.2.7
 +wan0_bigpond_manual=0
 +pci/1/1/macaddr=00:06:4E:00:00:03
 +sb/1/cddpo=0
 +emf_uffp_entry=
 +gs_pingWanBlock=1
 +eco_wlan_days=0 0 0 0 0 0 0
 +ddns_status=disabled
 +wps_status=0
 +wl0_guest_passwd=12345678
 +lan1_hwaddr=00:00:00:00:00:00
 +wl_dfs_preism=60
 +sb/1/rxchain=3
 +wan_pppoe_ip=0.0.0.0
 +wl_sta_retry_time=5
 +wl0_auth_mode=none
 +wl_closed=0
 +wl_wme_txp_bk=7 3 4 2 0
 +wl_tpc_db=
 +ac_schedule10=inactive
 +autofw_port0=
 +wl0.6_hwaddr=96:44:52:B9:7E:21
 +gs_ftp_enabled=0
 +ac_schedule11=inactive
 +wl0_crypto=aes
 +boardnum=121037G3118844
 +ac_schedule12=inactive
 +wl0_txchain=3
 +sb/1/antswitch=0
 +wan_pppoe_ifname=
 +wan_pptp_passwd=
 +bt_maxDownloads=3
 +dhcp_reserveMAC=
 +ac_schedule13=inactive
 +wl_bcn=100
 +ac_schedule14=inactive
 +pci/1/1/maxp5gla0=0x3a
 +wl_reg_mode=off
 +ac_schedule15=inactive
 +pci/1/1/maxp5gla1=0x3a
 +ac_schedule16=inactive
 +ac_schedule17=inactive
 +pci/1/1/antswctl5g=0
 +ac_schedule18=inactive
 +wl0_guest_timeout=720
 +wl_antdiv=-1
 +ac_schedule19=inactive
 +size: 13522 bytes (19246 left)</nowiki>
 +</WRAP>\\
 +
 +==== OpenWrt bootlog ====
 +<WRAP bootlog>
 +<nowiki>Decompressing...done
 +Decompressing...done
 +Init Arena
 +Init Devs.
 +Boot partition size = 131072(0x20000)
 +et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0
 +CPU type 0x19740: 453MHz
 +Tot mem: 65536 KBytes
 +
 +CFE mem:    0x80700000 - 0x8079B620 (636448)
 +Data:       0x807326D0 - 0x80734A80 (9136)
 +BSS:        0x80734A80 - 0x80735620 (2976)
 +Heap:       0x80735620 - 0x80799620 (409600)
 +Stack:      0x80799620 - 0x8079B620 (8192)
 +Text:       0x80700000 - 0x807326C4 (206532)
 +
 +
 +Copying boot params.....
 +DONE
 +
 +
 +Bootloader version 0.09e boot_version 0.09e
 +Project name : WG7016F22 1-LF-AK
 +Press space bar to cancel startup...
 +Device eth0:  hwaddr 94-44-52-B9-7E-2B, ipaddr 192.168.2.1, mask 255.255.255.0
 +        gateway not set, nameserver not set
 +Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
 +Loading: .. 3876 bytes read
 +Entry at 0x80001000
 +Closing network.
 +Starting program at 0x80001000
 +[    0.000000] Linux version 3.10.18 (x@gun) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38541) ) #1 Sat Nov 9 20:19:47 PST 2013
 +[    0.000000] bootconsole [early0] enabled
 +[    0.000000] CPU revision is: 00019740 (MIPS 74Kc)
 +[    0.000000] bcm47xx: using bcma bus
 +[    0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
 +[    0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
 +[    0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
 +[    0.000000] bcma: bus0: Early bus registered
 +[    0.000000] MIPS: machine is Belkin F7D330X
 +[    0.000000] Determined physical RAM map:
 +[    0.000000]  memory: 04000000 @ 00000000 (usable)
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] Zone ranges:
 +[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
 +[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
 +[    0.000000] Kernel command line:  noinitrd console=ttyS0,115200
 +[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 +[    0.000000] Writing ErrCtl register=00000000
 +[    0.000000] Readback ErrCtl register=00000000
 +[    0.000000] Memory: 61492k/65536k available (2402k kernel code, 4044k reserved, 570k data, 220k init, 0k highmem)
 +[    0.000000] NR_IRQS:128
 +[    0.000000] Calibrating delay loop... 225.02 BogoMIPS (lpj=450048)
 +[    0.040000] pid_max: default: 32768 minimum: 301
 +[    0.044000] Mount-cache hash table entries: 512
 +[    0.052000] NET: Registered protocol family 16
 +[    0.072000] bio: create slab <bio-0> at 0
 +[    0.080000] Switching to clocksource MIPS
 +[    0.092000] NET: Registered protocol family 2
 +[    0.100000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
 +[    0.108000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
 +[    0.112000] TCP: Hash tables configured (established 512 bind 512)
 +[    0.120000] TCP: reno registered
 +[    0.124000] UDP hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.132000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.136000] NET: Registered protocol family 1
 +[    0.144000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
 +[    0.152000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
 +[    0.164000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
 +[    0.172000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
 +[    0.180000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
 +[    0.192000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
 +[    0.204000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
 +[    0.256000] bcma: bus0: PCIEcore in host mode found
 +[    0.436000] PCI host bridge to bus 0000:00
 +[    0.440000] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0bffffff]
 +[    0.448000] pci_bus 0000:00: root bus resource [io  0x0100-0x07ff]
 +[    0.452000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
 +[    0.464000] bcma: PCI: Fixing up bridge 0000:00:00.0
 +[    0.468000] bcma: PCI: Fixing up device 0000:00:00.0
 +[    0.476000] bcma: PCI: Fixing up bridge 0000:00:00.1
 +[    0.480000] bcma: PCI: Fixing up device 0000:00:00.1
 +[    0.492000] bcma: bus0: Bus registered
 +[    0.500000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    0.508000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    0.520000] msgmni has been set to 120
 +[    0.524000] io scheduler noop registered
 +[    0.528000] io scheduler deadline registered (default)
 +[    0.532000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
 +[    0.564000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a U6_16550A
 +[    0.572000] console [ttyS0] enabled, bootconsole disabled
 +[    0.572000] console [ttyS0] enabled, bootconsole disabled
 +[    0.588000] physmap platform flash device: 02000001 at 1c000000
 +[    0.592000] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000cb
 +[    0.604000] Amd/Fujitsu Extended Query Table at 0x0040
 +[    0.608000]   Amd/Fujitsu Extended Query version 1.1.
 +[    0.616000] number of CFI chips: 1
 +[    0.676000] 6 bcm47xxpart partitions found on MTD device physmap-flash.0
 +[    0.684000] Creating 6 MTD partitions on "physmap-flash.0":
 +[    0.688000] 0x000000000000-0x000000030000 : "boot"
 +[    0.696000] 0x000000030000-0x0000007f0000 : "linux"
 +[    0.704000] 0x00000003001c-0x0000000309a0 : "loader"
 +[    0.712000] 0x0000000309a0-0x000000132800 : "kernel"
 +[    0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
 +[    0.732000] 0x000000132800-0x0000007f0000 : "rootfs"
 +[    0.740000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
 +[    0.756000] mtd: device 4 (rootfs) set to be root filesystem
 +[    0.760000] mtd: partition "rootfs_data" created automatically, ofs=0x300000, len=0x4f0000
 +[    0.768000] 0x000000300000-0x0000007f0000 : "rootfs_data"
 +[    0.780000] 0x0000007f0000-0x000000800000 : "nvram"
 +[    0.792000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
 +[    0.800000] GPIO_WDT: failed to register misc device
 +[    0.808000] TCP: cubic registered
 +[    0.808000] NET: Registered protocol family 17
 +[    0.816000] 8021q: 802.1Q VLAN Support v1.8
 +[    0.828000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
 +[    0.840000] Freeing unused kernel memory: 220K (802e9000 - 80320000)
 +Console is alive
 +procd: Console is alive
 +- watchdog -
 +procd: - watchdog -
 +^[^[[C^[^[[C[    3.604000] diag: kernel found a "Belkin F7D330X"
 +[    3.608000] diag: Detected 'Belkin F7D330X'
 +[    3.616000] pps_core: LinuxPPS API ver. 1 registered
 +[    3.620000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 +[    3.632000] PTP clock support registered
 +[    3.644000] bgmac bcma0:1: Found PHY addr: 30 (NOREGS)
 +[    3.652000] bgmac bcma0:1: Support for Roboswitch not implemented
 +[    3.660000] libphy: bgmac mii bus: probed
 +[    3.740000] b53_common: found switch: BCM5325, rev 0
 +[    3.744000] (unregistered net_device): attached PHY driver [Broadcom B53 (1)] (mii_bus:phy_addr=bgmac-0-0:1e)
 +[    3.760000] bgmac: Broadcom 47xx GBit MAC driver loaded
 +kmod: ran 15 iterations
 +- preinit -
 +procd: - preinit -
 +Press the [f] key and hit [enter] to enter failsafe mode
 +mount_root: jffs2 is ready
 +[    7.356000] jffs2: notice: (203) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 6 of xref (0 dead, 2 orphan) found.
 +- early -
 +procd: - early -
 +- watchdog -
 +procd: - watchdog -
 +- init -
 +procd: - init -
 +Please press Enter to activate this console.
 +[    9.344000] NET: Registered protocol family 10
 +[    9.364000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
 +[    9.380000] ip6_tables: (C) 2000-2006 Netfilter Core Team
 +[    9.408000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
 +[    9.420000] Backport generated by backports.git backports-20130617-4-ge3220f5
 +[    9.432000] ip_tables: (C) 2000-2006 Netfilter Core Team
 +[    9.500000] xt_time: kernel timezone is -0000
 +[    9.532000] cfg80211: Calling CRDA to update world regulatory domain
 +[    9.540000] cfg80211: World regulatory domain updated:
 +[    9.544000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
 +[    9.552000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
 +[    9.560000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
 +[    9.568000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
 +[    9.576000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
 +[    9.584000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
 +[    9.672000] PPP generic driver version 2.4.2
 +[    9.688000] NET: Registered protocol family 24
 +[    9.736000] b43-phy0: Broadcom 4716 WLAN found (core revision 17)
 +[    9.740000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 5
 +[    9.836000] Broadcom 43xx driver loaded [ Features: PNL ]
 +[    9.852000] Broadcom 43xx-legacy driver loaded [ Features: PLD ]
 +[   14.560000] device eth0.1 entered promiscuous mode
 +[   14.568000] device eth0 entered promiscuous mode
 +[   14.584000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
 +[   14.588000] br-lan: port 1(eth0.1) entered forwarding state
 +[   14.596000] br-lan: port 1(eth0.1) entered forwarding state
 +[   16.600000] br-lan: port 1(eth0.1) entered forwarding state
 +procd: - init complete -</nowiki>
 +</WRAP>\\
 +
 +
 +===== Notes =====
 +
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>1NIC 1WNIC 5Port USB Broadcom 16flash 64ram}}
  • Last modified: 2019/08/14 06:14
  • by tmomas