Differences
This shows you the differences between two versions of the page.
| Next revisionBoth sides next revision | |||
| toh:belkin:f7d1301 [2014/04/22 00:08] – external edit | toh:belkin:f7d1301 [2016/04/01 09:22] – registrar | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== Belkin F7D1301 ====== | ||
| + | Also known as Belkin Basic N150 Wireless router (?) | ||
| + | |||
| + | ===== Hardware ===== | ||
| + | |||
| + | CPU: Broadcom [[doc/ | ||
| + | RAM: Winbond W9864G6IH-6, | ||
| + | Flash: 2 MiB (?) | ||
| + | |||
| + | Allegedly not supported by OpenWRT. | ||
| + | |||
| + | ===== Debrick ===== | ||
| + | |||
| + | Here's how you can reset your configuration to factory state, eg. when it is stuck in an infinite-reboot loop after you tried setting your WiFi network name to something containing an unicode character. This assumes your web interface doesn' | ||
| + | |||
| + | * Step 1: Open case and remove PCB | ||
| + | * Step 2: Find J102 (4 unused holes (closed with solder) in a row, one of them with square pad) - this is a serial port. | ||
| + | * Step 3: Remove solder that is already there and solder a connector strip in the 4 holes. | ||
| + | * Step 4: Connect serial port adapter to the connector pins (and to your laptop) | ||
| + | * square pad is VCC (DON'T CONNECT, IT IS 3.3V NOT 5V, your serial port adapter will most certainly have 5V) | ||
| + | * pin below is DATA OUT | ||
| + | * pin below that is DATA IN | ||
| + | * last pin is GND | ||
| + | * Open serial console (115200 baud IIRC) | ||
| + | * If you power up the router, the serial console should print stuff already. You can't interact with it however. | ||
| + | * Unplug your router PCB again, press reset button and KEEP PRESSED while plugging in and during boot. | ||
| + | * Now the boot process should stop somewhere and a console prompt appears. | ||
| + | * with " | ||
| + | * Don't hesistate to use the ERASE FLASH command, it lets you choose which parts to erase (3 for config only) | ||
| + | |||
| + | |||
| + | ===== External links ===== | ||
| + | |||
| + | [[http:// | ||
| + | |||
| + | [[http:// | ||
| + | |||
| + | ===== Tags ===== | ||
| + | |||
| + | {{tag> | ||