Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:aztech:hw550-3g [2018/02/20 21:17] – ↷ Links adapted because of a move operation toh:aztech:hw550-3g [2018/06/16 10:46] – Datatables added, cleanup tmomas
Line 1: Line 1:
 ====== Aztech HW550-3G ====== ====== Aztech HW550-3G ======
 +
 ===== Supported Versions ===== ===== Supported Versions =====
-^ Version/Model   ^ Launch Date   ^ FCC ID     ^ OpenWrt Version Supported   ^ Model Specific Notes      ^ +---- datatable ---- 
-| v1              | 5/6/2009      | I38HW550   | Trunk                       | There is only 1 Version   |+cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid 
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data 
 +align   : c,c,c,c,c,c,
 +filter  : Model=HW550-3G 
 +---- 
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
-CPU                             ^ Ram     Flash   ^ Network   USB   ^ Serial   ^ JTag   ^ +---- datatable ---- 
-| Ralink RT3052F Rev 2 @ 384MHz   | 32MiB   | 8MiB    | x 1     | Yes   | Yes      | Yes    |+cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,
 +filter  : Model=HW550-3G 
 +---- 
  
 ===== Installation ===== ===== Installation =====
--> [[docs:user-guide:installation:generic.flashing]]+---- datatable ---- 
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url 
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock 
 +align   : c,c,c 
 +filter  : Model=HW550-3G 
 +---- 
 + 
 +-> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] 
 + 
 +FIXME Please add the installation procedure here.
  
-  * At the moment you have to [[docs:guide-developer:build-system:start]] the image yourself from trunk sources 
  
 ==== Flash Layout ==== ==== Flash Layout ====
Line 29: Line 48:
 **NOTE:** Serial connection and configured TFTP server needed! **NOTE:** Serial connection and configured TFTP server needed!
  
-  *   After compiling firmware successfully, move bin/ramips/openwrt-ramips-rt305x-hw550-3g-squashfs-sysupgrade.bin file into your TFTP server's directory. +  *   After compiling firmware successfully, move ''bin/ramips/openwrt-ramips-rt305x-hw550-3g-squashfs-sysupgrade.bin'' file into your TFTP server's directory. 
-  *   Then rename firmware to something shorter, for example "rt3052f.bin(the file name must be shorter than 32 symbols).+  *   Then rename firmware to something shorter, for example ''rt3052f.bin'' (the file name must be shorter than 32 symbols).
   *   Connect serial port to device (speed is 57600 8N1).   *   Connect serial port to device (speed is 57600 8N1).
   *   When you power on device, and see U-Boot log, immediately push "2" once.   *   When you power on device, and see U-Boot log, immediately push "2" once.
Line 44: Line 63:
 </code> </code>
  
- If TFTP server installed correctly, the firmware would be downloaded at ~30 seconds.+If TFTP server installed correctly, the firmware would be downloaded at ~30 seconds.
 Then it will be flashed into device (It will take about 2 minutes). Then it will be flashed into device (It will take about 2 minutes).
  
Line 53: Line 72:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-| **[[wp>Instruction set|Architecture]]:**   | [[wp>MIPS architecture|MIPS]]   | +[[wp>Instruction set|Architecture]]   | [[wp>MIPS architecture|MIPS]]   | 
-| **Vendor:**                                | [[wp>Ralink]]                   | +Vendor                                | [[wp>Ralink]]                   | 
-| **[[docs:techref:bootloader]]:**            | [[docs:techref:bootloader:uboot|U-Boot]]   | +[[docs:techref:bootloader]]           | [[docs:techref:bootloader:uboot|U-Boot]]   | 
-| **[[docs:hardware:soc|System-On-Chip]]:**   | Ralink RT3052F Rev 2 (MIPS24KEc V4.12)    | +[[docs:techref:hardware:soc|System-On-Chip]]   | Ralink RT3052F Rev 2 (MIPS24KEc V4.12)    | 
-| **[[docs:hardware:cpu|CPU]]/Speed**         | MIPS24KEc V4.12 384 Mhz                   | +[[docs:techref:hardware:cpu|CPU]]/Speed        | MIPS24KEc V4.12 384 MHz                   | 
-| **Flash-Chip:**  | Spansion S29GL064N90TF104 | +Flash-Chip  | Spansion S29GL064N90TF104 | 
-| **Flash size:**  | 8192 KiB        | +Flash size  | 8192 KiB        | 
-| **RAM:**         | 32 MiB Zentel A3V28S40FTP -G6                    | +RAM         | 32 MiB Zentel A3V28S40FTP -G6                    | 
-| **Wireless:**    | Ralink RT3052 (integrated) 2.4ghz 802.11bgn      | +Wireless    | Ralink RT3052 (integrated) 2.4GHz 802.11bgn      | 
-| **Ethernet:**    | Ralink RT3052 (integrated) 5 x 100/10 Ethernet   | +Ethernet    | Ralink RT3052 (integrated) 5 x 100/10 Ethernet   | 
-| **USB:**         | Yes 1 x 2.0     | +USB         | Yes 1 x 2.0     | 
-| **[[docs:hardware:port.serial|Serial]]:**   | [[#Serial|Yes]]   | +[[docs:techref:hardware:port.serial|Serial]]   | [[#Serial|Yes]]   | 
-| **[[docs:hardware:port.jtag|JTAG]]:**       | [[#JTAG|Yes]]     |+[[docs:techref:hardware:port.jtag|JTAG]]       | [[#JTAG|Yes]]     | 
 ==== JTAG ==== ==== JTAG ====
 {{:media:aztech:hw550_3g_jtag_resize.jpg|}} {{:media:aztech:hw550_3g_jtag_resize.jpg|}}
Line 294: Line 314:
 ==== Upgrade to 64MB SDRAM ==== ==== Upgrade to 64MB SDRAM ====
  
-To upgrade to 64MB SDRAM you need to flash a Ralink Bootloader that initialises 64MB of RAM and flash OpenWRT to the system.+To upgrade to 64MB SDRAM you need to flash a Ralink Bootloader that initialises 64MB of RAM and flash OpenWrt to the system.
 The original bootloader only initialises 32MB of SDRAM and the original Aztech Firmware only utilises 32MB of SDRAM as well. The original bootloader only initialises 32MB of SDRAM and the original Aztech Firmware only utilises 32MB of SDRAM as well.
 You can either compile the Bootloader by downloading Aztech's GPL SDK or flash a bootloader that initialises 64MB of SDRAM shared online. You can either compile the Bootloader by downloading Aztech's GPL SDK or flash a bootloader that initialises 64MB of SDRAM shared online.
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1