User Tools

Site Tools


toh:avm:fritzbox.7490

AVM FRITZ!Box 7490

FRITZ!Box 7490

Supported Versions

:!: At this moment (December 2018) there is no support: FORUM DISCUSSION

Note Regarding Potential Hardware Versions

AVM supply has 3 different OEM firmware versions for the 7490. At this time, it is known that Germany use AnnexB, while international use AnnexA so at a minimum, there must be at least 2 hardware versions, but with the 3rd firmware image for Belgium there might even be 3 different hardware versions of this device. The bulk of the documentation below is based on the International version of the 7490 (which also had markings for AU/NZ included in few places).

If any other users can identify any clear hardware version differences between this documentation and their own device, please summarize and add the info to this section here. FIXME

Experimental Versions

None at this time.

Hardware Highlights

ModelSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
FRITZ!Box 7490Lantiq XWAY VRX288 / PSB 80920 EL5008, 512NAND256Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880b/g/na/n/ac-4VDSL22x 3.0

Installation

Flash Layout

Overview

FIXME

Hardware

Info

General
Brand AVM
Model FRITZ!Box 7490
Versions
Device Type WiFi Router
Availability Available 2019
Comments - general See also https://boxmatrix.info/wiki/FRITZ!Box_7490 (old http://www.wehavemorefun.de/fritzbox/FRITZ!Box_Fon_WLAN_7490)
OpenWrt Support
Supported Since Commit
Supported Since Release
Supported Current Release
Unsupported
Hardware
Instruction set MIPS32
Sub Instruction Set MIPS32 34K series
Bootloader EVA
Target lantiq
System-On-Chip
CPU MHz 500
Flash MB 8, 512NAND
RAM MB 256
Network
Ethernet 100M ports -
Ethernet Gbit ports 4
Switch Atheros AR8035
Modem VDSL2
VLAN Yes
Comments - network ports
Wireless
WLAN 2.4GHz b/g/n
WLAN 5.0GHz a/n/ac
WLAN Hardware Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880
Detachable Antennas -
Comments - WLAN
Interfaces
USB ports 2x 3.0
SATA ports -
Serial Yes
JTAG Yes
Comments - USB & SATA ports
Misc
LED count 5
Button count 2
Power supply 12 VDC, 2.5 A
Links
Forum Topic URL
WikiDevi URL https://wikidevi.com/wiki/AVM_FRITZ!Box_7490
OEM device homepage URL https://en.avm.de/products/fritzbox/fritzbox-7490/technical-data/
Firmware OEM Stock URL http://download.avm.de/fritzbox/fritzbox-7490/
Firmware OpenWrt Install URL
Firmware OpenWrt Upgrade URL
Edit the underlying data View/Edit data
Instruction set MIPS
Vendor Lantiq
bootloader EVA Revision: 1.1964 Version: 2964
System-On-Chip PSB 80920 EL
CPU @Frq 2 CPU - MIPS 34Kc VR9 on 500MHz/250MHz/250MHz
Flash size 8192 KiB + 524288 KiB / 512MiB
Flash Chip 25L8035EM2I-10G MXIC + MACRONIX 29F4G08ABADA-WP or Micron MT29F4G08ABADAWP
RAM size 512 MiB
RAM Chip 2x E1108AJBG-8E
Hardware Bridge Xilinx Spartan XC3S100E
Wireless No1 distinct Chip: Qualcomm-QCA9558-AT4A w/ 3×3 MIMO for 2.4GHz 802.11b/g/n
Wireless No1 RAM size 128 MiB
Wireless No1 RAM Chip Winbond W9751G6KB-25
Wireless No2 distinct Chip: Qualcomm-QCA9880 AR1A w/ 3×3 MIMO for 2.4/5GHz 802.11a/b/g/n/ac
Wireless antenna 5x PCB, 1x Airgain N5X20SC (U.FL)
switch 4x Gigabit Atheros 8035
Modem xDSL
Modem Chip Lantiq XWAY v1.1 PSB 80190
USB Yes 2 x 3.0 (PSB 80920 EL)
DECT YES
Serial internal:GND/TXD/RXD/3.3V:115200 N 8 R
JTAG Yes 2×14

Photos

Opening the case

Note: This will void your warranty!

Four screws on the corners on bottom. Once screws removed, there is a small clip at the front that needs some gentle assistance.

Case Bottom Case Bottom

Main PCB PCB with serial Pinout

Serial

port.serial general information about the serial port, serial port cable, etc.

The serial port is located near the processing unit (with the heat sink on top): the serial port is the second row from left.

The pinout for the serial port is: GND, TX, RX and 3.3V (from top to bottom when looking the board with the DSL port on the top right).

More PCB photos photo taken from mikrocontroller.net

Serial connection parameters
for AVM FRITZ!Box 7490
115200n8r (<baud><parity><bits><flow>)

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
FIXME

Bootloader

Uses EVA.

Refer to EVA's tech reference for environment dump and commands its minimal shell supports: eva-7490-techref

BootLogs

OEM bootlog (running oem firmware 7.01)

ROM VER: 1.1.4 CFG 05 ** START ^MRVEC bf200000 ^M[\] ^M(AVM) EVA Revision: 1.1964 Version: 2964 ^M(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (1) 3 0x0-0x740D [FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer [FLASH:](Eraseregion [0] 16 sectors a 64kB) [NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW [SYSTEM:] VR9 on 500MHz/250MHz/250MHz .Atheros 8030/35 detected Eva_AVM >##.................................................. Lantiq xDSL CPE VR9 phym = 10000000, mem = 10000000, max_pfn = 00010000 Reserving memory for CP1 @0xb0000000, size 0x00000000 plat_device_tree_setup: AVM hardware subrevision 6 plat_device_tree_setup: using Fallback device-tree of AVM hardware subrevision 0 DT: d0 0d fe ed 00 00 14 36 [ 0.000000] Linux version 3.10.107 (jpluschke@GU_IQ17p2_NL1_vr9) (gcc version 5.4.0 (Buildroot 2016.05-g4d7c863) ) #1 SMP Tue Sep 11 17:57:02 CEST 2018 [ 0.000000] [env_init] 0x81018160[0] [ 0.000000] [env_init] 0x810181a0[1] [ 0.000000] [env_init] 0x810182a0[2] [ 0.000000] [env_init] switch to ram location [ 0.000000] [init_avm_kernel_config] AVM Kernel Config (ptr 808a8000) [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: module memory entry [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: version info entry [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: device-tree for subrev 0 found [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc) [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 10000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] [module-alloc] use 0x70c000 bytes at 0x81204000 [ 0.000000] Detected 1 available secondary CPU(s) [ 0.000000] PERCPU: Embedded 7 pages/cpu @81914000 s7328 r8192 d13152 u32768 [ 0.000000] Kernel command line: console=ttyS0,115200n8r nor_size=0MB sflash_size=1024KB nand_size=512MB ethaddr=38:10:D5:xx:xx:xx [ 0.000000] [NAND] nand_size = 0x20000000 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Writing ErrCtl register=0006c520 [ 0.000000] Readback ErrCtl register=0006c520 [ 0.000000] Memory: 242328k/262144k available (6291k kernel code, 19816k reserved, 2628k data, 288k init, 0k highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:181 [ 0.000000] SRSConf0 0x3feffbfe: SRS1: 0xffffffff, SRS2 0xffffffff, SRS3 0xffffffff [ 0.000000] Lantiq ICU driver, version 3.0.1, (c) 2001-2011 Lantiq Deutschland GmbH [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.020000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Security Framework initialized [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] Performance counters: mips/34K PMU enabled, 2 32-bit counters available to each CPU, irq 6 [ 0.100000] CPU1 revision is: 00019556 (MIPS 34Kc) [ 0.180000] Brought up 2 CPUs [ 0.180000] [yield_context_init] cpu=1 tc=2 mask=2301 [ 0.190000] [yield_context_init] cpu=0 tc=3 mask=410 [ 0.190000] devtmpfs: initialized [ 0.210000] pinctrl core: initialized pinctrl subsystem [ 0.210000] Creating Config Table [ 0.210000] [avm_generate_hw_config_table_from_device_tree] gpio_cnt: 46 [ 0.220000] NET: Registered protocol family 16 [ 0.230000] avm_check_cpu_features: mips-options: 0x006d638b icache.flags 0x00000000 dcache.flags 0x00000004 isa_level 0x00000063 ases 00000031 [ 0.240000] Reboot Status is: Soft-Reboot [ 0.240000] avm_alloc_page_extension node_extension_table[0] entries=65536 (size=262144) alloced [ 0.250000] [avmnet] [avmnet_cfg_init] Driver version: 6.295.2.2-iq17p2_nl1-jz32984_revert_NL1Di 11. Sep 17:53:51 CEST 2018 [ 1.060000] Lantiq PCIe Root Complex driver, version 2.0.0, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.100000] bio: create slab <bio-0> at 0 [ 1.110000] PCI host bridge to bus 0000:00 [ 1.110000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff] [ 1.120000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff] [ 1.130000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.130000] ifx_pcie_rc_class_early_fixup port 0: fixed pcie host bridge to pci-pci bridge [ 1.140000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff] [ 1.150000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c001fff 64bit] [ 1.160000] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.160000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff] [ 1.170000] AVM PA for Linux version 3.10.107 (jpluschke@GU_IQ17p2_NL1_vr9) (gcc version 5.4.0 (Buildroot 2016.05-g4d7c863) ) #1 SMP Tue Sep 11 17:57:02 CEST 2018 [ 1.170000] (early init) [ 1.190000] NET: Registered protocol family 8 [ 1.190000] NET: Registered protocol family 20 [ 1.200000] Switching to clocksource MIPS [ 1.240000] NET: Registered protocol family 2 [ 1.250000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 1.260000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 1.260000] TCP: Hash tables configured (established 2048 bind 2048) [ 1.270000] TCP: reno registered [ 1.270000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.280000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.280000] avm_pa: try to activate hw accelaration for pid 1 (ipv4) called from avm_pa_dev_pidhandle_register_with_ingress [ 1.290000] NET: Registered protocol family 1 [ 1.300000] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801 [ 1.310000] Lantiq CGU driver, version 1.1.32, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.320000] IFX DMA driver, version ifxmips_dma_core.c:v1.0.17, (c) 2009 Infineon Technologies AG [ 1.320000] skb_shared_size:184 [ 1.340000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.340000] ANTFS Module: Version 2.34 [ 1.340000] fuse init (API version 7.22) [ 1.350000] msgmni has been set to 473 [ 1.350000] io scheduler noop registered (default) [ 1.670000] ttyS0 at MMIO 0x1e100c00 (irq = 107) is a PORT_IFX_ASC [ 1.680000] ifx_usif_uart_init: uart_register_driver failed [ 1.680000] avm_net_trace: Up and running. [ 1.690000] [loadcontrol] set auto - scale=1 [ 1.690000] AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0) [ 1.700000] [simple-profiling]:2 performance counters implemented, NEW_34K [ 1.710000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=0) all cores tc: 0 [ 1.720000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=0) all cores tc: 0 [ 1.730000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=1) all cores tc: 1 [ 1.750000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=1) all cores tc: 1 [ 1.760000] [simple-profiling]Enable Performance Counter 0 for Main pipeline stalls (P) (User Supervisor Kernel Exception TC-ID=2) all cores tc: 2 [ 1.770000] [simple-profiling]Enable Performance Counter 1 for Cycles (P) (User Supervisor Kernel Exception TC-ID=2) all cores tc: 2 [ 1.790000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=3) all cores tc: 3 [ 1.800000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=3) all cores tc: 3 [ 1.810000] [simple-profiling]all cores:performance-mode (round-robin): cpus on [ 1.820000] Lantiq Thermal Sensor driver, version 1.0.3, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.830000] ifx_pmu_init: Major 244 [ 1.830000] Lantiq PMU driver, version 1.2.6, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.840000] Lantiq GPIO driver, version 1.3.2, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.850000] Infineon Technologies RCU driver version 1.0.7 [ 1.860000] loop: module loaded [ 1.870000] nbd: registered device at major 43 [ 1.900000] [HSNAND] Hardware-ECC activated [ 1.900000] ONFI param page 0 valid [ 1.900000] ONFI flash detected [ 1.910000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron MT29F4G08ABADAWP), 512MiB, page size: 2048, OOB size: 64 [ 1.920000] Scanning device for bad blocks [ 2.300000] Creating 6 MTD partitions on "ifx_hsnand": [ 2.310000] 0x000000000000-0x000000400000 : "kernel" [ 2.310000] 0x000000400000-0x000003400000 : "filesystem" [ 2.320000] 0x000003400000-0x000003800000 : "reserved-kernel" [ 2.330000] 0x000003800000-0x000006800000 : "reserved-filesystem" [ 2.340000] 0x000006800000-0x000006a00000 : "config" [ 2.340000] 0x000006a00000-0x000020000000 : "nand-filesystem" [ 2.350000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_hsnand [ 2.360000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_sflash [ 2.360000] Creating 3 MTD partitions on "ifx_sflash": [ 2.370000] 0x000000000000-0x000000040000 : "urlader" [ 2.380000] 0x000000040000-0x0000000a0000 : "tffs (1)" [ 2.380000] 0x0000000a0000-0x000000100000 : "tffs (2)" [ 2.390000] Lantiq SPI flash driver, version 2.0.2, (c) 2001-2011 Lantiq Deutschland GmbH [ 2.400000] tun: Universal TUN/TAP device driver, 1.6 [ 2.400000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.410000] SWAPI: Registered character device [switch_api] with major no [81] [ 2.420000] i2c /dev entries driver [ 2.420000] cpuidle: using governor ladder [ 2.430000] cpuidle: using governor menu [ 2.430000] AVM PA for Linux Linux version 3.10.107 (jpluschke@GU_IQ17p2_NL1_vr9) (gcc version 5.4.0 (Buildroot 2016.05-g4d7c863) ) #1 SMP Tue Sep 11 17:57:02 CEST 2018 [ 2.430000] (late init) [ 2.450000] Mirror/redirect action on [ 2.450000] u32 classifier [ 2.450000] Performance counters on [ 2.460000] Actions configured [ 2.460000] ipip: IPv4 over IPv4 tunneling driver [ 2.470000] TCP: cubic registered [ 2.470000] NET: Registered protocol family 10 [ 2.480000] avm_pa: try to activate hw accelaration for pid 4 (ipv6) called from avm_pa_dev_pidhandle_register_with_ingress [ 2.490000] sit: IPv6 over IPv4 tunneling driver [ 2.490000] NET: Registered protocol family 17 [ 2.500000] Bridge broadcast ratelimiter registered [ 2.500000] l2tp_core: L2TP core driver, V2.0 [ 2.500000] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 2.510000] l2tp_netlink: L2TP netlink interface [ 2.510000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 2.520000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 2.530000] 8021q: 802.1Q VLAN Support v1.8 [ 2.530000] Key type dns_resolver registered [ 2.540000] <ifx_fix_timing> [ 2.540000] [TFFS3_Init] No storage module registered, trying legacy fallback [ 2.550000] [TFFS3_LGCY_Setup] using mtd7(tffs (1)), mtd8(tffs (2)) [ 2.550000] [TFFS3_LGCY_Setup] mtd "tffs (1)": segment value 132 [ 2.560000] [TFFS3_LGCY_Setup] mtd "tffs (2)": segment value 133 [ 2.570000] [TFFS3_LGCY_Setup] Using segment 133 (avail: 132 + 133) [ 2.570000] [TFFS3_LGCY_Setup] mtd8 size=0x60000 [ 2.580000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0) [ 2.580000] Adam2 environment variables API installed. [ 2.590000] {avmnet_cfg_netinit} [ 2.600000] [avmnet] No config found for HWRev 185, HWSubRev 6, Profile-ID 0, trying base config for HWSubRev [ 2.610000] [avmnet] No config found for HWRev 185, HWSubRev 6, trying base config for HWRev [ 2.610000] [avmnet] [avmnet_swi_7port_init] Init on module swi_vr9 called. [ 2.970000] [ppe_eth_init] init_hw() [ 2.980000] [init_hw] ppe_hw_init=0xff successful [ 2.980000] [ppe_eth_init] ifx_proc_file_create() [ 2.990000] [ppe_eth_init] dma_setup_init() [ 2.990000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48 [ 3.000000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48 [ 6.450000] avm_pa: try to activate hw accelaration for pid 1 (ipv4) called from avm_pa_register_hardware_pa [ 6.460000] drivers/net/ethernet/avm/avm_cpmac/switch/ifx/common/swi_ifx_common.c:649:ifx_ppa_alloc_virtual_tx_device: alloc virtual tx for pid 1 FAILED [ 6.470000] avm_pa: can't activate tx channel, pid 1 (ipv4) [ 6.480000] avm_pa: try to activate hw accelaration for pid 4 (ipv6) called from avm_pa_register_hardware_pa [ 6.480000] drivers/net/ethernet/avm/avm_cpmac/switch/ifx/common/swi_ifx_common.c:649:ifx_ppa_alloc_virtual_tx_device: alloc virtual tx for pid 4 FAILED [ 6.500000] avm_pa: can't activate tx channel, pid 4 (ipv6) [ 6.500000] [set_pce_critical_mac] setting critical mac rule for ba:db:ad:c0:ff:ee, sw-m-port=5 [ 6.510000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth0): 38:10:d5:xx:xx:xc [ 6.520000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth1): 38:10:d5:xx:xx:xc [ 6.530000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth2): 38:10:d5:xx:xx:xc [ 6.540000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth3): 38:10:d5:xx:xx:xc [ 6.550000] [avmnet_set_macaddr] Setup Mac Addr for Device(wasp): 00:de:ad:be:ef:ca [ 6.560000] [avmnet_create_netdevice] setup offload_cpu_link on device wasp [ 6.610000] SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock1 [ 6.620000] [ntfs_boot_sector_is_ntfs] <ERROR> NTFS signature is missing. [ 6.630000] yaffs: dev is 32505857 name is "mtdblock1" ro [ 6.630000] yaffs: passed flags "" [ 6.670000] VFS: Mounted root (yaffs filesystem) readonly on device 31:1. [ 6.670000] devtmpfs: mounted [ 6.680000] Freeing unused kernel memory: 288K (808b8000 - 80900000) [ 7.680000] TFFS Name Table N [ 7.830000] yaffs: dev is 32505860 name is "mtdblock4" rw [ 7.840000] yaffs: passed flags "" [ 10.500000] led_modul_Fritz_Box_HW185: module license ' [ 10.500000] (C) Copyright 2012 by AVM [ 10.500000] ' taints kernel. [ 10.510000] Disabling lock debugging due to kernel taint [ 10.520000] [module-alloc-by-name] give 0x32000 bytes at 0x81204000 to module 'led_modul_Fritz_Box_HW185' (0x6da000 total bytes left) [ 10.550000] [LED] use GPIO 45 for 'gpio_avm_led_power' [ 10.550000] [LED] use GPIO 47 for 'gpio_avm_led_internet' [ 10.560000] [LED] use GPIO 36 for 'gpio_avm_led_festnetz' [ 10.560000] [LED] use GPIO 35 for 'gpio_avm_led_wlan' [ 10.570000] [LED] use GPIO 33 for 'gpio_avm_led_info' [ 10.570000] [LED] use GPIO 46 for 'gpio_avm_led_info_red' [ 10.580000] [BUTTON] use GPIO 29 for 'gpio_avm_button_wlan' [ 10.580000] [BUTTON] use GPIO 1 for 'gpio_avm_button_dect' [ 10.590000] [avm_connect][state_machine_init] starting event worker thread [ 10.610000] AVM_WATCHDOG: System Init Ueberwachung 240 Sekunden [ 11.870000] [module-alloc-by-name] give 0x2000 bytes at 0x81236000 to module 'rtc_avm' (0x6d8000 total bytes left) [ 11.890000] rtc-avm rtc-avm.0: rtc core: registered avm as rtc0 [ 11.890000] [avm-rtc]: avm_rtc_probe: register: ret=0x8f732c00 [ 11.900000] [avm-rtc]: avm_rtc_probe: success [ 12.150000] [ 12.150000] [avm_debug] redirecting kernel-messages (/dev/debug)


OEM bootlog (running oem firmware 6.83)

ROM VER: 1.1.4 CFG 05 <E7>$^@^ADC! <A4><A5><84><84>DC[/] ^M(AVM) EVA Revision: 1.1964 Version: 2964 ^M(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (0) 3 0x0-0x740D [FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer [FLASH:](Eraseregion [0] 16 sectors a 64kB) [NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW [SYSTEM:] VR9 on 500MHz/250MHz/250MHz .Atheros 8030/35 detected Eva_AVM >##....................................................... Lantiq xDSL CPE VR9 phym = 10000000, mem = 10000000, max_pfn = 00010000 Reserving memory for CP1 @0xb0000000, size 0x00000000 plat_device_tree_setup: AVM hardware subrevision 6 plat_device_tree_setup: using Fallback device-tree of AVM hardware subrevision 0 DT: d0 0d fe ed 00 00 14 36 [ 0.000000] Linux version 3.10.73 (jpluschke@Version_42822_C16_7490avme) (gcc version 4.8.3 (Buildroot 2014.08) ) #1 SMP Tue Mar 21 18:20:42 CET 2017 [ 0.000000] [env_init] 0x81018160[0] [ 0.000000] [env_init] 0x810181a0[1] [ 0.000000] [env_init] 0x810182a0[2] [ 0.000000] [env_init] switch to ram location [ 0.000000] [init_avm_kernel_config] AVM Kernel Config (ptr 80847000) [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: module memory entry [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: version info entry [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: device-tree for subrev 0 found [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc) [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 10000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] [module-alloc] use 0xb12000 bytes at 0x81205000 [ 0.000000] [0]lsmtc_smp_setup tcstatus=18102400 [ 0.000000] PERCPU: Embedded 7 pages/cpu @81d1b000 s7072 r8192 d13408 u32768 [ 0.000000] Kernel command line: console=ttyS0,115200n8r nor_size=0MB sflash_size=1024KB nand_size=512MB ethaddr=38:10:D5:xx:xx:xx [ 0.000000] [NAND] nand_size = 0x20000000 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Writing ErrCtl register=0006db70 [ 0.000000] Readback ErrCtl register=0006db70 [ 0.000000] Memory: 239068k/262144k available (5583k kernel code, 23076k reserved, 2948k data, 292k init, 0k highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:181 [ 0.000000] SRSConf0 0x3feffbfe: SRS1: 0xffffffff, SRS2 0xffffffff, SRS3 0xffffffff [ 0.000000] Lantiq ICU driver, version 3.0.1, (c) 2001-2011 Lantiq Deutschland GmbH [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.020000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Security Framework initialized [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] CPU1 revision is: 00019556 (MIPS 34Kc) [ 0.170000] Brought up 2 CPUs [ 0.170000] [yield_context_init] cpu=1 tc=2 mask=301 [ 0.180000] [yield_context_init] cpu=0 tc=3 mask=2410 [ 0.180000] devtmpfs: initialized [ 0.200000] pinctrl core: initialized pinctrl subsystem [ 0.200000] Creating Config Table [ 0.200000] [avm_generate_hw_config_table_from_device_tree] gpio_cnt: 46 [ 0.210000] NET: Registered protocol family 16 [ 0.220000] avm_check_cpu_features: mips-options: 0x006d638b icache.flags 0x00000000 dcache.flags 0x00000004 isa_level 0x00000063 ases 00000031 [ 0.230000] [TFFS3_Early_Init] called [ 0.240000] avm_alloc_page_extension node_extension_table[0] entries=65536 (size=262144) alloced [ 0.240000] Reboot Status is: Power-On [ 0.250000] [avmnet] [avmnet_cfg_init] Driver version: 6.247 - Revision 1496:3622 - Di 21. Mär 18:19:50 CET 2017 [ 0.870000] Lantiq PCIe Root Complex driver, version 2.0.0, (c) 2001-2011 Lantiq Deutschland GmbH [ 0.920000] bio: create slab <bio-0> at 0 [ 0.930000] PCI host bridge to bus 0000:00 [ 0.930000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff] [ 0.940000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff] [ 0.940000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.950000] ifx_pcie_rc_class_early_fixup port 0: fixed pcie host bridge to pci-pci bridge [ 0.960000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff] [ 0.970000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c001fff 64bit] [ 0.970000] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.980000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff] [ 0.990000] NET: Registered protocol family 8 [ 0.990000] NET: Registered protocol family 20 [ 1.000000] Switching to clocksource MIPS [ 1.050000] NET: Registered protocol family 2 [ 1.050000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 1.060000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 1.060000] TCP: Hash tables configured (established 2048 bind 2048) [ 1.070000] TCP: reno registered [ 1.070000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.080000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.090000] avm_pa: try to activate hw accelaration for pid 1 (ipv4) [ 1.090000] NET: Registered protocol family 1 [ 1.100000] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801 [ 1.110000] Lantiq CGU driver, version 1.1.32, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.120000] IFX DMA driver, version ifxmips_dma_core.c:v1.0.17, (c) 2009 Infineon Technologies AG [ 1.120000] skb_shared_size:184 [ 1.130000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.140000] fuse init (API version 7.22) [ 1.140000] msgmni has been set to 466 [ 1.150000] io scheduler noop registered (default) [ 1.490000] ttyS0 at MMIO 0x1e100c00 (irq = 107) is a PORT_IFX_ASC [ 1.500000] ifx_usif_uart_init: uart_register_driver failed [ 1.510000] avm_net_trace: Up and running. [ 1.510000] [loadcontrol] set auto - scale=1 [ 1.520000] Lantiq Thermal Sensor driver, version 1.0.3, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.520000] ifx_pmu_init: Major 244 [ 1.530000] Lantiq PMU driver, version 1.2.6, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.540000] Lantiq GPIO driver, version 1.3.2, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.540000] Infineon Technologies RCU driver version 1.0.7 [ 1.560000] loop: module loaded [ 1.570000] nbd: registered device at major 43 [ 1.600000] [HSNAND] Hardware-ECC activated [ 1.600000] ONFI param page 0 valid [ 1.600000] ONFI flash detected [ 1.610000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron MT29F4G08ABADAWP), 512MiB, page size: 2048, OOB size: 64 [ 1.620000] Scanning device for bad blocks [ 2.040000] Creating 6 MTD partitions on "ifx_hsnand": [ 2.040000] 0x000000000000-0x000000400000 : "reserved-kernel" [ 2.050000] 0x000000400000-0x000003400000 : "reserved-filesystem" [ 2.060000] 0x000003400000-0x000003800000 : "kernel" [ 2.060000] 0x000003800000-0x000006800000 : "filesystem" [ 2.070000] 0x000006800000-0x000006a00000 : "config" [ 2.080000] 0x000006a00000-0x000020000000 : "nand-filesystem" [ 2.090000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_hsnand [ 2.090000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_sflash [ 2.100000] Creating 3 MTD partitions on "ifx_sflash": [ 2.110000] 0x000000000000-0x000000040000 : "urlader" [ 2.110000] 0x000000040000-0x0000000a0000 : "tffs (1)" [ 2.120000] 0x0000000a0000-0x000000100000 : "tffs (2)" [ 2.130000] Lantiq SPI flash driver, version 2.0.2, (c) 2001-2011 Lantiq Deutschland GmbH [ 2.130000] tun: Universal TUN/TAP device driver, 1.6 [ 2.140000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.150000] SWAPI: Registered character device [switch_api] with major no [81] [ 2.150000] i2c /dev entries driver [ 2.160000] cpuidle: using governor ladder [ 2.160000] cpuidle: using governor menu [ 2.160000] AVM PA for Linux 3.10.73 [ 2.170000] AVM PA skb pktinfo at offset 136 size 208 [ 2.170000] [loadcontrol]module avm_pa registered [ 2.180000] u32 classifier [ 2.180000] Performance counters on [ 2.180000] Actions configured [ 2.190000] ipip: IPv4 over IPv4 tunneling driver [ 2.190000] TCP: cubic registered [ 2.200000] NET: Registered protocol family 10 [ 2.200000] avm_pa: try to activate hw accelaration for pid 2 (ipv6) [ 2.210000] sit: IPv6 over IPv4 tunneling driver [ 2.210000] NET: Registered protocol family 17 [ 2.220000] Bridge broadcast ratelimiter registered [ 2.220000] l2tp_core: L2TP core driver, V2.0 [ 2.230000] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 2.230000] l2tp_netlink: L2TP netlink interface [ 2.240000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 2.240000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 2.250000] 8021q: 802.1Q VLAN Support v1.8 [ 2.250000] Key type dns_resolver registered [ 2.260000] <ifx_fix_timing> [ 2.260000] [TFFS3_Init] No storage module registered, trying legacy fallback [ 2.270000] [TFFS3_Register_LGCY] Called [ 2.270000] [TFFS3_LGCY_Configure] Called [ 2.280000] [TFFS3_LGCY_Setup] using mtd7(tffs (1)), mtd8(tffs (2)) [ 2.280000] [TFFS3_LGCY_Setup] mtd "tffs (1)": segment value 130 [ 2.290000] [TFFS3_LGCY_Setup] mtd "tffs (2)": segment value 129 [ 2.290000] [TFFS3_LGCY_Setup] Using segment 130 (avail: 130 + 129) [ 2.300000] [TFFS3_LGCY_Setup] mtd7 size=0x60000 [ 2.310000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0) [ 2.310000] [rescan_segment] Called with mode=2 [ 2.310000] TFFS: Clearing index for update [ 2.320000] Adam2 environment variables API installed. [ 2.330000] [simple-profiling]:2 performance counters implemented, NEW_34K [ 2.330000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=0) all cores tc: 0 [ 2.350000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=0) all cores tc: 0 [ 2.360000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=1) all cores tc: 1 [ 2.370000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=1) all cores tc: 1 [ 2.390000] [simple-profiling]Enable Performance Counter 0 for Main pipeline stalls (P) (User Supervisor Kernel Exception TC-ID=2) all cores tc: 2 [ 2.400000] [simple-profiling]Enable Performance Counter 1 for Cycles (P) (User Supervisor Kernel Exception TC-ID=2) all cores tc: 2 [ 2.410000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=3) all cores tc: 3 [ 2.420000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=3) all cores tc: 3 [ 2.440000] [simple-profiling]all cores:performance-mode (round-robin): cpus on [ 2.450000] {avmnet_cfg_netinit} [ 2.450000] [avmnet] No config found for HWRev 185, HWSubRev 6, Profile-ID 0, trying base config for HWSubRev [ 2.460000] [avmnet] No config found for HWRev 185, HWSubRev 6, trying base config for HWRev [ 2.470000] [avmnet] [avmnet_swi_7port_init] Init on module swi_vr9 called. [ 2.790000] [ppe_eth_init] init_hw() [ 2.790000] [init_hw] ppe_hw_init=0xff successful [ 2.800000] [ppe_eth_init] ifx_proc_file_create() [ 2.800000] [ppe_eth_init] dma_setup_init() [ 2.810000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48 [ 2.820000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48 [ 6.210000] avm_pa: try to activate hw accelaration for pid 1 (ipv4) [ 6.210000] avm_pa: tx channel activated, pid 1 (ipv4) [ 6.220000] avm_pa: try to activate hw accelaration for pid 2 (ipv6) [ 6.220000] avm_pa: tx channel activated, pid 2 (ipv6) [ 6.230000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth0): 38:10:d5:xx:xx:xc [ 6.240000] avmnet: avm_pa: register pid eth0 [ 6.240000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth1): 38:10:d5:xx:xx:xd [ 6.250000] avmnet: avm_pa: register pid eth1 [ 6.250000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth2): 38:10:d5:xx:xx:x1 [ 6.260000] avmnet: avm_pa: register pid eth2 [ 6.270000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth3): 38:10:d5:xx:xx:x2 [ 6.280000] avmnet: avm_pa: register pid eth3 [ 6.280000] [avmnet_set_macaddr] Setup Mac Addr for Device(wasp): 00:de:ad:be:ef:ca [ 6.290000] [avmnet_create_netdevice] setup offload_cpu_link on device wasp [ 6.290000] avmnet: avm_pa: register pid wasp [ 6.340000] SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock3 [ 6.350000] yaffs: dev is 32505859 name is "mtdblock3" ro [ 6.350000] yaffs: passed flags "" [ 6.380000] VFS: Mounted root (yaffs filesystem) readonly on device 31:3. [ 6.390000] devtmpfs: mounted [ 6.400000] Freeing unused kernel memory: 292K (80857000 - 808a0000) [ 6.430000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x9b0e) [ 6.440000] {micron_read_hwecc} page 0x9b0e Sec 0 1 Berr 0 OOB 0 ECC [ 6.790000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x724a) [ 6.790000] {micron_read_hwecc} page 0x724a Sec 0 1 Berr 0 OOB 0 ECC [ 6.860000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8456) [ 6.870000] {micron_read_hwecc} page 0x8456 Sec 3 1 Berr 0 OOB 0 ECC [ 6.990000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8485) [ 6.990000] {micron_read_hwecc} page 0x8485 Sec 0 1 Berr 0 OOB 0 ECC [ 7.530000] TFFS Name Table L [ 7.640000] yaffs: dev is 32505860 name is "mtdblock4" rw [ 7.650000] yaffs: passed flags "" [ 9.120000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x7de3) [ 9.120000] {micron_read_hwecc} page 0x7de3 Sec 2 1 Berr 0 OOB 0 ECC [ 10.190000] led_modul_Fritz_Box_HW185: module license ' [ 10.190000] (C) Copyright 2012 by AVM [ 10.190000] ' taints kernel. [ 10.200000] Disabling lock debugging due to kernel taint [ 10.200000] [module-alloc-by-name] give 0x1d000 bytes at 0x81205000 to module 'led_modul_Fritz_Box_HW185' (0xaf5000 bytes left) [ 10.230000] [LED] use GPIO 45 for 'gpio_avm_led_power' [ 10.240000] [LED] use GPIO 47 for 'gpio_avm_led_internet' [ 10.240000] [LED] use GPIO 36 for 'gpio_avm_led_festnetz' [ 10.250000] [LED] use GPIO 35 for 'gpio_avm_led_wlan' [ 10.250000] [LED] use GPIO 33 for 'gpio_avm_led_info' [ 10.260000] [LED] use GPIO 46 for 'gpio_avm_led_info_red' [ 10.260000] [BUTTON] use GPIO 29 for 'gpio_avm_button_wlan' [ 10.270000] [BUTTON] use GPIO 1 for 'gpio_avm_button_dect' [ 10.290000] AVM_WATCHDOG: System Init UEberwachung 240 Sekunden [ 10.840000] [module-alloc-by-name] give 0x3000 bytes at 0x81222000 to module 'rtc_avm' (0xaf2000 bytes left) [ 10.850000] rtc-avm rtc-avm.0: rtc core: registered avm as rtc0 [ 10.860000] [avm-rtc]: avm_rtc_probe: register: ret=0x8f686000 [ 10.860000] [avm-rtc]: avm_rtc_probe: success [ 11.070000] [ 11.070000] [avm_debug] redirecting kernel-messages (/dev/debug)


OpenWrt bootlog

...


Notes

Tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/avm/fritzbox.7490.txt · Last modified: 2019/11/09 09:38 by tmomas