AVM FRITZ!Box Fon WLAN 7390

FRITZ!Box Fon WLAN 7390 or Fritz!Box 7390 for short, is a modem/router (ADSL+VDSL) all in one device, featuring a DECT base station and VoIP (SIP) client and server that includes ISDN ports to connect “old school” wired phones to it. Fritz!Box, stylised as FRITZ!Box, is a series of residential gateway devices produced by the German company AVM GmbH.

Version/Model Launch Date S/N OpenWrt Version Supported Model Specific Notes
- 2009-01 - - -
CPU Ram Flash WiFi Network USB Serial JTag
Fusiv VX180@500MHz 128MiB 16MiB+512MiB NAND 2.4+5GHz a/b/g/n 4x Gigabit 2x USB 2.0 Host Yes Yes

NOT SUPPORTED by OpenWrt But check out https://freetz.github.io/

SoC: Fusiv Vx180, seems like there won't be any support due entire Soc is not supported.

:!: To be able to flash unofficial images through the stock web interface, you must be (or downgrade to) a firmware version lower than 6.5x!

To downgrade, simply follow the debricking guide but use this (manufacturer's) tool instead:

FRITZ.Box_Fon_WLAN_7390.AnnexB.06.23.recover-image.exe

:!: After downgrading with this tool, the web UI will be in German!

:!: I do not know if a device can be debricked/recovered if you accidentally wipe the bootloader!

Architecture MIPS32
Vendor Ikanos
Bootloader ADAM2/EVA
SoC Ikanos Fusiv Vx180 (IKF6850)
CPU 500 MHz MIPS32 24KEc Hard-IP-Core
xDSL ADSL + VDSL (100 MBit VDSL with Full Vectoring)
VoIP Yes, SIP, including DECT base station and ISDN-S₀-Bus to connect ISDN phones/devices
Flash-Chip Macronix MX29GL128E (16MB for firmware), ST NAND04GW3B2BN6E (512MB NAND for NAS)
Flash size 16384 KiB + 512MiB NAND
RAM 128 MiB
Wireless 802.11b/g/a 2,4 GHz (up to 150 MBit/s) and 802.11n 5 GHz (up to 300 MBit/s)
Ethernet 4 x Gigabit-Ethernet
USB Yes 2x USB 2.0 HOST
Serial Yes
JTAG Yes

Let's have a quick view at the Flash Layout with the stock firmware and after OpenWrt has been installed. When you later want to understand, what mtd/sysupgrade do, have a second look here:

Board ROUND ROUND ROUND SQUARE
GND RX TX VCC
SimensDataCable black blue white
Serial connection parameters 3.3V, 115200 Baud 8N1
# screen /dev/ttyUSB0 115200

How to connect to JTAG interface, and how to reflash the device with JTAG tools.
See port.jtag for more JTAG details.

HWRevision156
HWSubRevision3
ProductIDFritz_Box_7390
SerialNumber0000000000000000
annexA
autoloadyes
bootloaderVersion1.819
bootserporttty0
country99
cpufrequency500000000
firstfreeaddress0x810D952C
firmware_versionavme
firmware_info84.05.06
flashsize0x01000000
languageen
macaBC:05:43:MM:AA:CC
macbBC:05:43:MM:AA:CC
macwlanBC:05:43:MM:AA:CC
macwlan2BC:05:43:MM:AA:CC
macdslBC:05:43:MM:AA:CC
memsize0x08000000
modetty038400,n,8,1,hw
modetty138400,n,8,1,hw
mtd00x9F000000,0x9F000000
mtd10x9F020000,0x9FF00000
mtd20x9F000000,0x9F020000
mtd30x9FF00000,0x9FF80000
mtd40x9FF80000,0xA0000000
my_ipaddress192.168.178.1
promptEva_AVM
req_fullrate_freq166666666
sysfrequency166666666
tr069_passphrase123456789012
tr069_serial00040E-123456789012
urlader-version1819
usb_board_macBC:05:43:MM:AA:CC
usb_rndis_macBC:05:43:MM:AA:CC
usb_device_id0x0000
usb_revision_id0x0000
usb_manufacturer_nameAVM
wlan_key1234567890123456

:!: Note that the variables country and language only exist in the international firmware! And annex is set to B on the German firmware.

no full bootlog - box is “broken”

(AVM) EVA Revision: 1.1939 Version: 2939 (C) Copyright 2005 AVM Date: Oct 31 2013 Time: 13:24:41 (8) 3 0x0-0xB40D [FLASH:] MACRONIX Uniform-Flash 16MB 64 Bytes WriteBuffer [FLASH:](Eraseregion [0] 128 sectors a 128kB) [SYSTEM:] IKANOS on 500MHz/166MHz [RESERVED:] 0x6000000 - 0x6800000 Eva_AVM >....................................[ 0.000000] Linux version 2.6.28.10 (gcc version 4.8.1 (Buildroot 2013.05) ) #1 Thu Aug 1 20:01:47 CEST 2019 [ 0.000000] memsize board_memsize = 134217728 [ 0.000000] psb_value = 0x0600007f memsize = 0x08000000 xtensa_mem_start = 0x06000000 xtensa_mem_size 0x00800000 [ 0.000000] wlan_mem_start = 0x05ef9000 [ 0.000000] board_flash_size 0x01000000 [ 0.000000] CPU revision is: 0001964c (MIPS 24Kc) [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 05ef9000 @ 00000000 (usable) [ 0.000000] memory: 01800000 @ 06800000 (usable) [ 0.000000] nid=0 start=0 map=5b7 end=8000 mapsize=1000 mode_bootmen_map=805b7000 [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00008000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00005ef9 [ 0.000000] 0: 0x00006800 -> 0x00008000 [ 0.000000] [module-alloc] failed 0x7b98a0 bytes at 0x81101000 [ 0.000000] [request_resource] Kernel code: start 0x10000 < root->start 0x6800000 [ 0.000000] [request_resource] Kernel data: start 0x2efc90 < root->start 0x6800000 [ 0.000000] entering build_all_zonelists() [ 0.000000] return from set_zonelist_order() [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30201 [ 0.000000] Kernel command line: memsize=128 flash_start=0x9F000000 flash_size=16 console=ttyS0,115200n8r nor_size=16777216 nand_size=512MB [ 0.000000] [FUSIV] add physmap-flash to the platform device list [ 0.000000] [FUSIV] add direct-avm-nand to the platform device list [ 0.000000] [trap_init] cpu_has_ejtag [ 0.000000] [trap_init] cpu_has_watch [ 0.000000] [trap_init] cpu_has_divec [ 0.000000] [trap_init] cpu_has_mcheck [ 0.000000] [trap_init] cpu_has_4kex [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00001ed3 [ 0.000000] Readback ErrCtl register=00001ed3 [ 0.000000] [mips_nmi_setup] setup NMI vector to base 0x80000380 [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes) [ 0.000000] console [ttyS0] enabled [ 0.004000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.008000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.028000] Memory: 106748k/121828k available (2943k kernel code, 14904k reserved, 1662k data, 144k init, 0k highmem) [ 0.032000] Calibrating delay loop... 332.80 BogoMIPS (lpj=665600) [ 0.124000] Mount-cache hash table entries: 512 [ 0.128000] kernel_init: started [ 0.132000] kernel_init: kernel locked [ 0.136000] net_namespace: 636 bytes [ 0.140000] NET: Registered protocol family 16 [ 0.144000] Reboot Status is: Power-On [ 0.148000] [ikan_gpio_init] [ 0.148000] [GPIO] pin 7 is configured as funktion pin, not avileable as gpio [ 0.152000] initcall ikan_gpio_init+0x0/0x50 returned with disabled interrupts [ 0.156000] [cpmac] Version: 1.108.1.135 - Revision 811:3451 - Do 1.08.2019 19:59:41 [ 1.164000] Fusiv PCI: starting... [ 1.196000] registering PCI controller with io_map_base unset [ 1.200000] [FUSIV] register 2 platform device(s) [ 1.204000] [find_nmi_vector] nmi vector found. Firmware length 0xeaac41 bytes (erase block align 0xeb0000) vector gap size 0x100 bytes. [ 1.208000] [find_nmi_vector] add 'urlader' size 0x20000 to length [ 1.224000] In pcibios_map_irq!!!!!!!!!!!! [ 1.228000] In pcibios_map_irq!!!!!!!!!!!! [ 1.244000] NET: Registered protocol family 8 [ 1.248000] NET: Registered protocol family 20 [ 1.252000] NET: Registered protocol family 2 [ 1.292000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 1.296000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.304000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 1.312000] TCP: Hash tables configured (established 4096 bind 4096) [ 1.316000] TCP reno registered [ 1.332000] avm_pa: try to activate hw accelaration for pid 1 (ipv4) [ 1.336000] NET: Registered protocol family 1 [ 1.344000] squashfs: version 3.4 (2008/08/26) Phillip Lougher [ 1.348000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.356000] fuse init (API version 7.10) [ 1.360000] msgmni has been set to 208 [ 1.372000] alg: No test for stdrng (krng) [ 1.376000] io scheduler noop registered (default) [ 1.380000] [avm_membench_init] [ 1.388000] avm_net_trace: Up and running. [ 1.392000] [avm] configured: watchdog event debug [ 1.396000] AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Aug 1 2019 19:58:26) [ 1.408000] [gpio 13]: VX180_GPIO_POLAR: active low [ 1.408000] [gpio 13]: GPIO_EDGE_SENSITIVE [ 1.416000] [loadcontrol] set auto - scale=1 [ 1.420000] Serial: 8250/16550 driver1 ports, IRQ sharing disabled [ 1.428000] serial8250: ttyS0 at MMIO 0xb90a0000 (irq = 29) is a 16450 [ 1.436000] PPP generic driver version 2.4.2 [ 1.440000] NET: Registered protocol family 24 [ 1.444000] tun: Universal TUN/TAP device driver, 1.6 [ 1.448000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.456000] [physmap_flash_probe] line=94, doing probes [ 1.460000] physmap platform flash device: 01000001 at 1f000000 [ 1.468000] physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank [ 1.472000] Amd/Fujitsu Extended Query Table at 0x0040 [ 1.480000] physmap-flash: CFI does not contain boot bank location. Assuming top. [ 1.488000] number of CFI chips: 1 [ 1.492000] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. [ 1.496000] [parse_mtd_partitions] types=cmdlinepart [ 1.504000] [parse_mtd_partitions] types=RedBoot [ 1.508000] RedBoot partition parsing not available [ 1.512000] [parse_mtd_partitions] types=find_squashfs [ 1.524000] [fusiv_squashfs_parser_function] magic found @offset 0x15a400 [ 1.532000] 6 find_squashfs partitions found on MTD device physmap-flash [ 1.536000] Creating 6 MTD partitions on "physmap-flash": [ 1.544000] 0x0017a400-0x00f00000 : "rootfs" (master-size:16777216) [ 1.548000] mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only [ 1.560000] 0x00020000-0x0017a400 : "kernel" (master-size:16777216) [ 1.564000] mtd: partition "kernel" doesn't end on an erase block -- force read-only [ 1.572000] 0x00000000-0x00020000 : "urlader" (master-size:16777216) [ 1.580000] 0x00f00000-0x00f80000 : "tffs (1)" (master-size:16777216) [ 1.588000] 0x00f80000-0x01000000 : "tffs (2)" (master-size:16777216) [ 1.592000] 0x00000000-0x01000000 : "reserved" (master-size:16777216) [ 1.600000] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 1.608000] AVM Direct NAND driver, (c) 2008 AVM Berlin [ 1.612000] [direct_avm_nand_probe] error output [ 1.616000] [NAND] direct NAND: GPIO usage: 16: /CE0 17: /CE1: 20 /WP 18: CLE 19: ALE (0x3) [ 1.624000] [direct_avm_nand_probe] irq init [ 1.628000] [gpio 21]: VX180_GPIO_POLAR: active high [ 1.628000] [gpio 21]: GPIO_EDGE_SENSITIVE [ 1.640000] [gpio 7]: VX180_GPIO_POLAR: active high [ 1.640000] [gpio 7]: GPIO_EDGE_SENSITIVE [ 1.648000] [NAND] read feature bytes: P1=8|P2=0|P3=0|P4=0 [ 1.652000] [NAND] Hardware-ECC activated [ 1.672000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron NAND 512MiB 3,3V 8-bit) [ 1.680000] NAND_ECC_NONE selected by board driver. This is not recommended !! [ 1.684000] Scanning device for bad blocks [ 2.016000] Creating 1 MTD partitions on "NAND 512MiB 3,3V 8-bit": [ 2.024000] 0x00000000-0x20000000 : "nand-filesystem" (master-size:536870912) [ 2.032000] CAPI Subsystem Rev 1.1.2.8 [ 2.036000] AVM PA for Linux 2.6.28.10 [ 2.040000] AVM PA skb pktinfo at offset 216 size 208 [ 2.044000] [loadcontrol]module avm_pa registered [ 2.052000] TCP cubic registered [ 2.052000] mcfw: IGMPv3 fast forwarding [ 2.056000] NET: Registered protocol family 10 [ 2.064000] avm_pa: try to activate hw accelaration for pid 2 (ipv6) [ 2.068000] IPv6 over IPv4 tunneling driver [ 2.076000] NET: Registered protocol family 17 [ 2.080000] RPC: Registered udp transport module. [ 2.084000] RPC: Registered tcp transport module. [ 2.088000] l2tp_core: L2TP core driver, V2.0 [ 2.092000] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 2.112000] l2tp_netlink: L2TP netlink interface [ 2.116000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 2.120000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 2.128000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 2.132000] All bugs added by David S. Miller <davem@redhat.com> [ 2.140000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0) [ 2.148000] mount on mtd3 and mtd4 (double buffering) [ 2.156000] Adam2 environment variables API installed. [ 2.160000] AVM Simple Profiling enabled Version 3.0 [ 2.164000] [simple-profiling]:2 performance counters implemented, OLD_34K [ 2.172000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception ) [ 2.184000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception ) [ 2.196000] kernel_init: basic setup done [ 2.200000] [squashfs] use lzma compression [ 2.208000] VFS: Mounted root (squashfs filesystem) readonly. [ 2.216000] Freeing unused kernel memory: 490000: 144k freed [ 2.228000] trying /sbin/init [ 2.892000] TFFS Name Table I [ 4.268000] [module-alloc-by-name] give 0x16000 bytes at 0x81101000 to module 'led_modul_Fritz_Box_7390' [ 4.280000] led_modul_Fritz_Box_7390: module license ' [ 4.280000] (C) Copyright 2012 by AVM [ 4.280000] ' taints kernel. [ 4.300000] [register_bug_debug_table] name='led_modul_Fritz_Box_7390' 0x8110c7e4 - 0x8110c870 [ 4.312000] [gpio 31]: VX180_GPIO_POLAR: active low [ 4.312000] [gpio 31]: GPIO_BOTH_EDGES_SENSITIVE [ 4.320000] [gpio 29]: VX180_GPIO_POLAR: active low [ 4.320000] [gpio 29]: GPIO_BOTH_EDGES_SENSITIVE [ 4.328000] [button_init] name button_both, virtual multipush button [ 4.336000] [LED] "wyatt_earp_turn_off_leds" (0x80584778) loaded [ 4.360000] AVM_WATCHDOG: System Init UEberwachung 240 Sekunden [ 5.136000] [module-alloc-by-name] give 0x4000 bytes at 0x81117000 to module 'rtc_core' [ 5.168000] [module-alloc-by-name] give 0x2000 bytes at 0x8111b000 to module 'rtc_avm' [ 5.192000] [register_bug_debug_table] name='rtc_avm' 0x8111bafc - 0x8111bb24 [ 5.200000] rtc-avm rtc-avm.0: rtc core: registered avm as rtc0 [ 5.204000] [avm-rtc]: avm_rtc_probe: register: ret=0x8797d600 [ 5.212000] [avm-rtc]: avm_rtc_probe: success [ 5.280000] [module-alloc-by-name] give 0xf000 bytes at 0x8111d000 to module 'fusivlib_lkm' [ 5.404000] fusiv library initializing... [ 5.408000] netlink for debugging is created! [ 5.412000] xdslmode start not with 0x [ 5.416000] xdslmode read=5: #vdsl [ 5.416000] # (0x1): Buffer Copy Through DMA is enabled [ 5.424000] [ 5.424000] fusiv library initialized SUCCESSFULLY... [ 5.456000] [module-alloc-by-name] give 0x6000 bytes at 0x8112c000 to module 'ap2ap_lkm' [ 5.508000] [register_bug_debug_table] name='ap2ap_lkm' 0x8112fa4c - 0x8112fa74 [ 5.516000] [ 5.516000] AP2AP fastpath initialized SUCCESSFULLY<3>[module-alloc-by-name] give 0x4000 bytes at 0x81132000 to module 'bmdriver_lkm' [ 5.580000] [ 5.580000] Buffer Manager is initializing...hlakkala_19:51_10Jun13 [ 5.588000] [ 5.588000] *Buffer Manager initialized SUCCESSFULLY...* [ 5.596000] BMU GIGE clock [ 5.600000] Slave Mem Alloc: Req size 32 Ptr2Block 0x191f0000 [ 5.632000] Load into BM APU Successful !!! [ 5.632000] [ 5.660000] [module-alloc-by-name] give 0x2000 bytes at 0x81136000 to module 'timers_lkm' [ 5.672000] [register_bug_debug_table] name='timers_lkm' 0x811365d4 - 0x811365fc [ 5.680000] Timers are getting initalized [ 5.684000] Timers are initilized SUCCESSFULLY... [ 5.716000] [module-alloc-by-name] give 0x4000 bytes at 0x81138000 to module 'periap_driver_lkm' [ 5.748000] mac: xx:xx:xx:xx:xx:xx [ 5.748000] [ 5.752000] config_wlan_macaddr_to_periap ret =0 [ 5.752000] [ 5.756000] periApDriverInit: doneSlave Mem Alloc: Req size 32 Ptr2Block 0x191f0020 [ 5.776000] [ 5.776000] *******LOAD firmware to AP:PERI_ID result:0Load into PERI_AP APU Successful !!! [ 5.780000] [ 5.808000] [module-alloc-by-name] give 0xb000 bytes at 0x8113c000 to module 'ethdriver_lkm' [ 5.872000] [register_bug_debug_table] name='ethdriver_lkm' 0x811415d4 - 0x811415fc [ 5.880000] cpmac0: Netpro Sierra Ethernet found at 0xb9110000, irq 14 [ 5.888000] GIGE 1 clock dev->baseAddr b9110000 [ 5.892000] Setting unknown egress to SPA [ 5.900000] Slave Mem Alloc: Req size 32 Ptr2Block 0x191f0040 [ 5.916000] [ 5.916000] Ethernet Driver is initialized SUCCESSFULLY [ 5.932000] [module-alloc-by-name] give 0x6000 bytes at 0x81147000 to module 'sysKCode_lkm' [ 5.980000] [module-alloc-by-name] give 0x5000 bytes at 0x8114d000 to module 'aclap_driver_lkm' [ 6.020000] [ 6.020000] ACL-AP is initializing... [ 6.028000] ACL major allocated is 201 [ 6.032000] [ 6.032000] Initializing 4 AP for ACL while SPA_ID=4Slave Mem Alloc: Req size 32 Ptr2Block 0x191f0060 [ 6.040000] [ 6.040000] The pConfig->ipc.cpuQueueSpec[cnt].pQueue is 7973100, NumEntries=32 [ 6.052000] [ 6.052000] The pConfig->ipc.cpuQueueSpec[cnt].pQueue is 7b3ef80, NumEntries=32 [ 6.060000] [ 6.060000] The pConfig->ipc.cpuQueueSpec[cnt].pQueue is 7b3ef00, NumEntries=32 [ 6.068000] [ 6.068000] The pConfig->ipc.cpuQueueSpec[cnt].pQueue is 7b3ee80, NumEntries=32 [ 6.076000] [ 6.076000] Configuring host ACL Layer-2 ruleset (128/4 Rules/Intf) [ 6.084000] [ 6.084000] Configuring host ACL Layer-3 ruleset (128/4 Rules/Intf) [ 6.100000] Load into ACL_AP APU Successful !!! [ 6.100000] [ 6.104000] Need to run mknod ... [ 6.116000] [module-alloc-by-name] give 0x1000 bytes at 0x81152000 to module 'opensrc_lkm' [ 6.152000] [module-alloc-by-name] give 0x2000 bytes at 0x81153000 to module 'bmedrv' [ 6.168000] [register_bug_debug_table] name='bmedrv' 0x8115415c - 0x81154184 [ 6.176000] bmedrv_init: Registered BME device with Major number 247 [ 6.180000] Request Region 0xa6000000 - 0xa67fffff [ 6.188000] bmedrv_init: Region 0xa6000000 - 0xa67fffff allocated successfully [ 6.192000] BME Driver has been loaded SUCCESSFULLY [ 6.796000] yaffs: dev is 32505862 name is "mtdblock6" rw [ 6.800000] yaffs: passed flags "" [ 6.952000] [ 6.952000] [avm_debug] redirecting kernel-messages (/dev/debug) [ 67.720000] CPU 0 Unable to handle kernel paging request at virtual address ffffd004, epc == 8118ccfc, ra == 81162208 [ 67.720000] Oops[#1]: [ 67.720000] Cpu 0 [ 67.720000] $ 0 : 00000000 00000000 00000001 00000200 [ 67.720000] $ 4 : 00000201 812f0368 00000000 00000080 [ 67.720000] $ 8 : 00000000 80175970 00000004 86ec4000 [ 67.720000] $12 : 00000043 00000000 00000000 00010000 [ 67.720000] $16 : 8118c790 8118bd50 00000003 00000011 [ 67.720000] $20 : 00000001 803e0000 00000001 810c93c8 [ 67.720000] $24 : 00000000 812b2848 [ 67.720000] $28 : 803d4000 803d7d68 fffdffef 81162208 [ 67.720000] Hi : 037bdd02 [ 67.720000] Lo : 3ebcef07 [ 67.720000] epc : 8118ccfc SharedMemory+0x2c/0xffff3640 [pcmlink] [ 67.720000] Tainted: P [ 67.720000] ra : 81162208 pcmlink_ul_dectctrl_handler+0xb8/0x110 [pcmlink] [ 67.720000] Status: 1100fc02 KERNEL EXL [ 67.720000] Cause : 00804008 exc_code:2 TLBL [ 67.720000] BadVA : ffffd004 [ 67.720000] epc : 8118ccfc SharedMemory+0x2c/0xffff3640 [pcmlink] [ 67.720000] errepc: bf004af0 0xbf004af0 [ 67.720000] Tainted: P [ 67.720000] ra : 81162208 pcmlink_ul_dectctrl_handler+0xb8/0x110 [pcmlink] [ 67.720000] PrId : 0001964c (MIPS 24Kc) [ 67.720000] Modules linked in: ath_pktlog(P) umac ath_dev(P) ath_dfs(P) ath_spectral(P) ath_rate_atheros(P) ath_hal(P) asf(P) adf(P) aae(P) loop krtp(P) avm_pa_fusiv userman_mod(P) kdsldmod(P) ohci_hcd ehci_hcd usbcore ramzswap lzo_compress lzo_decompress dect_io(P) avm_dect(P) capi_codec(P) isdn_fbox_fon5(P) pcmlink(P) Piglet_noemif(P) bmedrv(P) opensrc_lkm aclap_driver_lkm(P) sysKCode_lkm(P) ethdriver_lkm(P) periap_driver_lkm(P) timers_lkm(P) bmdriver_lkm(P) ap2ap_lkm(P) fusivlib_lkm(P) rtc_avm rtc_core led_modul_Fritz_Box_7390(P) [ 67.720000] Process swapper (pid: 0, threadinfo=803d4000, task=803d8000, tls=00000000) [ 67.720000] Stack : 00000003 00000011 00000001 803e0000 00000001 8118bd50 00000000 81160948 [ 67.720000] 2b275d00 800544d8 00001ede 8001f098 86ee9180 00000000 00000003 00000011 [ 67.720000] 00000001 803e0000 803e0000 810c93c8 fffdffef 8115e134 00000043 2aea7ad5 [ 67.720000] 803d7e18 00008288 80540000 80540000 8118ccb0 00000000 00000000 00000011 [ 67.720000] 00000001 81163c58 fffdffef 803d7e38 00000000 b9050020 ffff0000 86ed5b80 [ 67.720000] ... [ 67.720000] Call Trace: [ 67.720000] [<81160948>] pcmlink_ul_handler+0x70/0x20c [pcmlink] [ 67.720000] [<800544d8>] tick_program_event+0x24/0x30 [ 67.720000] [<8001f098>] c0_compare_interrupt+0x74/0xa0 [ 67.720000] [<8115e134>] pcmlink_ll_status_pcmbus+0x428/0x764 [pcmlink] [ 67.720000] [<81163c58>] VOIPOnlyLink_SharedMemory+0x60/0x12a4 [pcmlink] [ 67.720000] [<8005da70>] handle_IRQ_event+0x54/0xb0 [ 67.720000] [<8005db98>] __do_IRQ+0xcc/0x144 [ 67.720000] [<80055390>] tick_check_idle+0x20/0x30 [ 67.720000] [<80013658>] fusiv_dispatch_irq+0x1c4/0x474 [ 67.720000] [<8006065c>] rcu_needs_cpu+0x30/0x44 [ 67.720000] [<80054ef8>] tick_nohz_stop_sched_tick+0x1a8/0x3d4 [ 67.720000] [<80011fd8>] plat_irq_dispatch+0x58/0x140 [ 67.720000] [<80016380>] r4k_wait+0x0/0x40 [ 67.720000] [<812b2848>] RunFunctionTimerSystem+0x0/0x3c [avm_dect] [ 67.720000] [<80017e8c>] cpu_idle+0x60/0x90 [ 67.720000] [<800163a0>] r4k_wait+0x20/0x40 [ 67.720000] [<802e5420>] rest_init+0x58/0x64 [ 67.720000] [<802e5330>] kernel_entry+0x0/0x98 [ 67.720000] [ 67.720000] Code: 00000000 8118d004 8118d1cc <00000014> 00000000 00000002 86ed15a0 86ed1000 00000200 [ 68.044000] system-load 6 loadavg 1.56 0.54 0.19 - 78 tasks:8 % curr:swapper(0 %) max:ctlmgr(4 %, pid:786) pgstat: sum=32483 free=4570 slab=10268 alloc=90/s fault=279/s (sleep 1) [ 72.848000] [ 72.848000] HardwareWatchDog - NMI taken!!!! [ 72.848000] CPU0 NMI taken (err)epc=handle_int+0xe0/0xfc[#2]: [ 72.848000] Cpu 0 [ 72.848000] $ 0 : 00000000 0001d4c0 8053b1b8 66b97000 [ 72.848000] $ 4 : 00000080 00008eb3 00000001 8030e40c [ 72.848000] $ 8 : 1100fc00 1000001f 00000023 00000000 [ 72.848000] $12 : 00000078 0000000d 00000005 00000009 [ 72.848000] $16 : 803d7cb8 80377554 803d8000 00000011 [ 72.848000] $20 : 00000001 803e0000 00000000 00000000 [ 72.848000] $24 : 00000006 802ea4a0 [ 72.848000] $28 : 803d4000 803d7b10 8057f658 8001bd20 [ 72.848000] Hi : 000000a6 [ 72.848000] Lo : 66b97000 [ 72.848000] epc : 800164c0 handle_int+0xe0/0xfc [ 72.848000] Tainted: P D [ 72.848000] ra : 8001bd20 die+0x74/0x10c [ 72.848000] Status: 1148fc04 KERNEL ERL [ 72.848000] Cause : 00804000 exc_code:0 [ 72.848000] epc : 800164c0 handle_int+0xe0/0xfc [ 72.848000] errepc: 800164c0 handle_int+0xe0/0xfc [ 72.848000] Tainted: P D [ 72.848000] ra : 8001bd20 die+0x74/0x10c [ 72.848000] PrId : 0001964c (MIPS 24Kc) [ 72.848000] Process swapper (pid: 0, threadinfo=803d4000, task=803d8000, tls=00000000) [ 72.848000] Stack : 803e0000 803e0000 80379868 80035ff0 803e0000 80377154 00000000 0001d4c0 [ 72.848000] 8053b1b8 00000001 00000080 00008eb3 00000001 8030e40c 00000000 00000020 [ 72.848000] 00000023 00000000 00000078 0000000d 00000005 00000009 803d7cb8 80377554 [ 72.848000] 803d8000 00000011 00000001 803e0000 00000000 00000000 00000006 802ea4a0 [ 72.848000] 00000000 00000000 803d4000 803d7bc0 8057f658 8001bd20 1100fc03 000000a6 [ 72.848000] ... [ 72.848000] Call Trace: [ 72.848000] [<800164c0>] handle_int+0xe0/0xfc [ 72.848000] [<8001bd20>] die+0x74/0x10c [ 72.848000] [ 72.848000] [ 72.848000] Code: 01094025 3908001f 40886000 <000000c0> 8f900040 af9d0040 3c1f8001 27ff61b0 080047e0 [ 72.848000] Call Trace: [ 72.848000] [<802ea244>] dump_stack+0x8/0x34 [ 72.848000] [<802ea364>] panic+0x44/0x180 [ 72.848000] [<8001bdb0>] die+0x104/0x10c [ 72.848000] [<8001d29c>] set_except_vector+0x0/0x6c [ 72.848000] [ 72.848000] Kernel panic - not syncing: Fatal exception in interrupt [ 72.848000] WARNING: use tffs in panic mode (minor 96) [ 72.848000] Rebooting in 5 seconds.. [ 72.848000] disabling IRQ's and enabling reset bit in all AP's


This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2023/03/04 10:41
  • by sweil