| Next revision | Previous revision Next revisionBoth sides next revision |
| toh:avm:fritz.box.wlan.6840 [2019/11/09 07:51] – created fidodido | toh:avm:fritz.box.wlan.6840 [2019/11/09 08:50] – [Serial] fidodido |
|---|
| Phone works only via SIP with asterisk or another SIP package and a wifi or ethernet SIP phone. | Phone works only via SIP with asterisk or another SIP package and a wifi or ethernet SIP phone. |
| |
| | {{:media:avm:fritzbox_6840:fritz_box_6840_lte-presse.jpg?400|}} |
| | ===== Supported Versions ===== |
| | ---- datatable ---- |
| | cols : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid |
| | headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data |
| | align : c,c,c,c,c,c,c |
| | filter : Brand=AVM |
| | filter : Model*~6840 |
| | ---- |
| | |
| | ^ Version/Model ^ Launch Date ^ OpenWrt Version Supported ^ Model Specific Notes ^ |
| | | v1 | 2011 | WIP | | |
| | |
| | ===== Hardware Highlights ===== |
| | {{:media:avm:fritzbox_6840:fritzbox_6840_lte-pcb.jpg?400|}} |
| | ==== Info ==== |
| | ^ ^ **//Rev B//** ^ |
| | ^ Architecture | VR9-MIPS32 34Kc | |
| | ^ CPU-Cores | 2 | |
| | ^ Vendor | Lantiq | |
| | ^ Bootloader | EVA | |
| | ^ System-On-Chip | PSB80920EL V1.1 | |
| | ^ CPU/Speed | 500 MHz | |
| | ^ S-Flash-Chip | MX25L2006 | |
| | ^ S-Flash size | 256 KiB | |
| | ^ N-Flash-Chip | HY27UF081G2A | |
| | ^ N-Flash size | 128 MiB | |
| | ^ RAM-Chip | | |
| | ^ RAM size | 128 MiB | |
| | ^ Modem | Yes LTE | |
| | ^ Wireless | 2.4GHz 802.11bgn | |
| | ^ Ethernet | 4x 1 Gbit/s w/ vlan support | |
| | ^ Phone | 1x FXS | |
| | ^ USB | Yes | |
| | ^ Serial | Yes | |
| | |
| | ==== Flash Layout ==== |
| | The OEM Flash layout is: |
| | |
| | ^ FRITZ!Box 6840 OEM Flash Layout ^^^^^^^^^^ |
| | ^ Layer0 | 128MiB ||||||||| |
| | ^ Layer1 |mtd0\\ **//reserved-kernel//**\\ 4MiB |mtd1 \\ **//reserved-filesystem//**\\ 48MiB |mtd2\\ **//Kernel//**\\ 4MiB ||mtd3\\ **//filesystem//**\\ 48MiB | mtd4\\ **//config//**\\ 2MiB ||| mtd5\\ **//nand-filesystem//**\\ 22MiB| |
| | |
| | ==== Serial ==== |
| | |
| | Serial connector: |
| | |
| | {{:media:avm:fritzbox_6840:fritzbox_6840_serial.png?400|}} |
| | |
| | ^ Serial connection parameters | 115200, 8N1 | |
| | |
| | ===== Bootlogs ===== |
| | ==== OEM bootlog ==== |
| | <WRAP bootlog> |
| | <nowiki> |
| | (AVM) EVA Revision: 1.1475 Version: 2475 |
| | |
| | (C) Copyright 2005 AVM Date: Nov 19 2012 Time: 11:51:38 (0) 2 0x0-0x741D |
| | |
| | [FLASH:] MACRONIX Uniform-Flash 256kB 256 Bytes WriteBuffer |
| | [FLASH:](Eraseregion [0] 4 sectors a 64kB) |
| | [NAND:] 128MB MICRON 2048 Pagesize 128k Blocksize 1024 Blocks 8Bit 1 CS |
| | [SYSTEM:] VR9 on 500MHz/250MHz/250MHz |
| | |
| | .Infineon PHY11G detected |
| | |
| | Eva_AVM >..................................................... |
| | Lantiq xDSL CPE VR9 |
| | phym = 08000000, mem = 08000000, max_pfn = 00008000 |
| | Reserving memory for CP1 @0xa8000000, size 0x00000000 |
| | plat_device_tree_setup: AVM hardware subrevision 5 |
| | plat_device_tree_setup: using Fallback device-tree of AVM hardware subrevision 2 |
| | DT: d0 0d fe ed 00 00 10 a5 |
| | |
| | [ 0.000000] Linux version 3.10.73 (jpluschke@GU_C16_vr9) (gcc version 4.8.3 (Buildroot 2014.08) ) #1 SMP Wed Feb 8 18:16:22 CET 2017 |
| | [ 0.000000] [env_init] 0x810179e0[0] |
| | [ 0.000000] [env_init] 0x81017a20[1] |
| | [ 0.000000] [env_init] 0x81017b20[2] |
| | [ 0.000000] [env_init] switch to ram location |
| | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config (ptr 80847000) |
| | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: module memory entry |
| | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: version info entry |
| | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: device-tree for subrev 0 found |
| | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: device-tree for subrev 1 found |
| | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: device-tree for subrev 2 found |
| | [ 0.000000] bootconsole [early0] enabled |
| | [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc) |
| | [ 0.000000] Determined physical RAM map: |
| | [ 0.000000] memory: 08000000 @ 00000000 (usable) |
| | [ 0.000000] Initrd not found or empty - disabling initrd |
| | [ 0.000000] Zone ranges: |
| | [ 0.000000] Normal [mem 0x00000000-0x07ffffff] |
| | [ 0.000000] Movable zone start for each node |
| | [ 0.000000] Early memory node ranges |
| | [ 0.000000] node 0: [mem 0x00000000-0x07ffffff] |
| | [ 0.000000] On node 0 totalpages: 32768 |
| | [ 0.000000] free_area_init_node: node 0, pgdat 8083dde0, node_mem_map 81004000 |
| | [ 0.000000] Normal zone: 256 pages used for memmap |
| | [ 0.000000] Normal zone: 0 pages reserved |
| | [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 |
| | [ 0.000000] [module-alloc] use 0xcc8000 bytes at 0x81105000 |
| | [ 0.000000] [0]lsmtc_smp_setup tcstatus=18102400 |
| | [ 0.000000] 1 available secondary CPU TC(s) |
| | [ 0.000000] [avm_cache_set_coherency]: setting cache coherency for HWRevision=177 to write back allocate |
| | [ 0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes. |
| | [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes |
| | [ 0.000000] PERCPU: Embedded 7 pages/cpu @81dd1000 s7072 r8192 d13408 u32768 |
| | [ 0.000000] pcpu-alloc: s7072 r8192 d13408 u32768 alloc=8*4096 |
| | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 |
| | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 |
| | [ 0.000000] Kernel command line: console=ttyS0,115200n8r nor_size=0MB sflash_size=256KB nand_size=128MB ethaddr=5C:49:79:4D:A3:00 |
| | [ 0.000000] [NAND] nand_size = 0x8000000 |
| | [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) |
| | [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) |
| | [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) |
| | [ 0.000000] Writing ErrCtl register=000643da |
| | [ 0.000000] Readback ErrCtl register=000643da |
| | [ 0.000000] Memory: 107368k/131072k available (5583k kernel code, 23704k reserved, 2948k data, 292k init, 0k highmem) |
| | [ 0.000000] Hierarchical RCU implementation. |
| | [ 0.000000] NR_IRQS:181 |
| | [ 0.000000] SRSConf0 0x3feffbfe: SRS1: 0xffffffff, SRS2 0xffffffff, SRS3 0xffffffff |
| | [ 0.000000] Lantiq ICU driver, version 3.0.1, (c) 2001-2011 Lantiq Deutschland GmbH |
| | [ 0.000000] Console: colour dummy device 80x25 |
| | [ 0.000000] console [ttyS0] enabled, bootconsole disabled |
| | [ 0.020000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880) |
| | [ 0.080000] pid_max: default: 32768 minimum: 301 |
| | [ 0.080000] Security Framework initialized |
| | [ 0.080000] Mount-cache hash table entries: 512 |
| | [ 0.090000] I-cache flushes single-threaded |
| | [ 0.090000] D-cache flushes single-threaded |
| | [ 0.090000] Limit of 2 TCs set |
| | [ 0.090000] TLB of 32 entry pairs shared by 2 VPEs |
| | [ 0.090000] VPE 0: TC 0, VPE 1: TC 1 |
| | [ 0.090000] IPI buffer pool of 8 buffers |
| | [ 0.090000] CPU1 revision is: 00019556 (MIPS 34Kc) |
| | [ 0.170000] TC 1 going on-line as CPU 1 |
| | [ 0.170000] Brought up 2 CPUs |
| | [ 0.170000] [yield_context_init] cpu=1 tc=2 mask=301 |
| | [ 0.180000] [yield_context_init] cpu=0 tc=3 mask=2410 |
| | [ 0.180000] devtmpfs: initialized |
| | [ 0.200000] pinctrl core: initialized pinctrl subsystem |
| | [ 0.200000] Creating Config Table |
| | [ 0.200000] [avm_generate_hw_config_table_from_device_tree] gpio_cnt: 39 |
| | [ 0.210000] NET: Registered protocol family 16 |
| | [ 0.220000] FPU Affinity set after 5000 emulations |
| | [ 0.220000] avm_check_cpu_features: mips-options: 0x006d638b icache.flags 0x00000000 dcache.flags 0x00000004 isa_level 0x00000063 ases 00000031 |
| | [ 0.230000] [TFFS3_Early_Init] called |
| | [ 0.240000] avm_alloc_page_extension node_extension_table[0] entries=32768 (size=131072) alloced |
| | [ 0.240000] Reboot Status is: Power-On |
| | [ 0.250000] [avmnet] [avmnet_cfg_init] Driver version: 6.247 - Revision 1496:3622 - Mi 8. Feb 18:15:17 CET 2017 |
| | [ 0.260000] Port 0 PLL REGFILE |
| | [ 0.260000] PCIE_PHY_PLL_CTRL1 0x8e39 |
| | [ 0.260000] PCIE_PHY_PLL_CTRL2 0x0183 |
| | [ 0.260000] PCIE_PHY_PLL_CTRL3 0x0042 |
| | [ 0.260000] PCIE_PHY_PLL_CTRL4 0x0000 |
| | [ 0.260000] PCIE_PHY_PLL_CTRL5 0x0000 |
| | [ 0.260000] PCIE_PHY_PLL_CTRL6 0x0000 |
| | [ 0.260000] PCIE_PHY_PLL_CTRL7 0x0000 |
| | [ 0.260000] PCIE_PHY_PLL_A_CTRL1 0x120e |
| | [ 0.260000] PCIE_PHY_PLL_A_CTRL2 0x39d7 |
| | [ 0.260000] PCIE_PHY_PLL_A_CTRL3 0x0900 |
| | [ 0.260000] PCIE_PHY_PLL_STATUS 0x0000 |
| | [ 0.260000] TX1 REGFILE |
| | [ 0.260000] PCIE_PHY_TX1_CTRL1 0x0009 |
| | [ 0.260000] PCIE_PHY_TX1_CTRL2 0x2e00 |
| | [ 0.260000] PCIE_PHY_TX1_CTRL3 0x1fff |
| | [ 0.260000] PCIE_PHY_TX1_A_CTRL1 0x0810 |
| | [ 0.260000] PCIE_PHY_TX1_A_CTRL2 0x0706 |
| | [ 0.260000] PCIE_PHY_TX1_MOD1 0x0000 |
| | [ 0.260000] PCIE_PHY_TX1_MOD2 0x0000 |
| | [ 0.260000] PCIE_PHY_TX1_MOD3 0x0180 |
| | [ 0.260000] TX2 REGFILE |
| | [ 0.260000] PCIE_PHY_TX2_CTRL1 0x0009 |
| | [ 0.260000] PCIE_PHY_TX2_CTRL2 0x3096 |
| | [ 0.260000] PCIE_PHY_TX2_A_CTRL1 0x8010 |
| | [ 0.260000] PCIE_PHY_TX2_A_CTRL2 0x4707 |
| | [ 0.260000] PCIE_PHY_TX2_MOD1 0x0000 |
| | [ 0.260000] PCIE_PHY_TX2_MOD2 0x0000 |
| | [ 0.260000] PCIE_PHY_TX2_MOD3 0x0180 |
| | [ 0.260000] RX1 REGFILE |
| | [ 0.260000] PCIE_PHY_RX1_CTRL1 0x0001 |
| | [ 0.260000] PCIE_PHY_RX1_CTRL2 0x3000 |
| | [ 0.260000] PCIE_PHY_RX1_CDR 0x0235 |
| | [ 0.260000] PCIE_PHY_RX1_EI 0x0004 |
| | [ 0.260000] PCIE_PHY_RX1_A_CTRL 0x6803 |
| | [ 0.270000] Port 0 PLL REGFILE |
| | [ 0.270000] PCIE_PHY_PLL_CTRL1 0x38e4 |
| | [ 0.270000] PCIE_PHY_PLL_CTRL2 0x03ee |
| | [ 0.270000] PCIE_PHY_PLL_CTRL3 0x0000 |
| | [ 0.270000] PCIE_PHY_PLL_CTRL4 0x1b72 |
| | [ 0.270000] PCIE_PHY_PLL_CTRL5 0xfae3 |
| | [ 0.270000] PCIE_PHY_PLL_CTRL6 0x3a04 |
| | [ 0.270000] PCIE_PHY_PLL_CTRL7 0x0002 |
| | [ 0.270000] PCIE_PHY_PLL_A_CTRL1 0x120e |
| | [ 0.270000] PCIE_PHY_PLL_A_CTRL2 0x39d7 |
| | [ 0.270000] PCIE_PHY_PLL_A_CTRL3 0x2900 |
| | [ 0.270000] PCIE_PHY_PLL_STATUS 0x0070 |
| | [ 0.270000] TX1 REGFILE |
| | [ 0.270000] PCIE_PHY_TX1_CTRL1 0x0009 |
| | [ 0.270000] PCIE_PHY_TX1_CTRL2 0x2e00 |
| | [ 0.270000] PCIE_PHY_TX1_CTRL3 0x1fff |
| | [ 0.270000] PCIE_PHY_TX1_A_CTRL1 0x0810 |
| | [ 0.270000] PCIE_PHY_TX1_A_CTRL2 0x0706 |
| | [ 0.270000] PCIE_PHY_TX1_MOD1 0x1ffe |
| | [ 0.270000] PCIE_PHY_TX1_MOD2 0xfffe |
| | [ 0.270000] PCIE_PHY_TX1_MOD3 0x0001 |
| | [ 0.270000] TX2 REGFILE |
| | [ 0.270000] PCIE_PHY_TX2_CTRL1 0x0009 |
| | [ 0.270000] PCIE_PHY_TX2_CTRL2 0x3096 |
| | [ 0.270000] PCIE_PHY_TX2_A_CTRL1 0x8010 |
| | [ 0.270000] PCIE_PHY_TX2_A_CTRL2 0x4707 |
| | [ 0.270000] PCIE_PHY_TX2_MOD1 0x1ffe |
| | [ 0.270000] PCIE_PHY_TX2_MOD2 0xfffe |
| | [ 0.270000] PCIE_PHY_TX2_MOD3 0x0001 |
| | [ 0.270000] RX1 REGFILE |
| | [ 0.270000] PCIE_PHY_RX1_CTRL1 0x0001 |
| | [ 0.270000] PCIE_PHY_RX1_CTRL2 0x3000 |
| | [ 0.270000] PCIE_PHY_RX1_CDR 0x0235 |
| | [ 0.270000] PCIE_PHY_RX1_EI 0x0004 |
| | [ 0.270000] PCIE_PHY_RX1_A_CTRL 0x6803 |
| | [ 0.870000] Lantiq PCIe Root Complex driver, version 2.0.0, (c) 2001-2011 Lantiq Deutschland GmbH |
| | [ 0.920000] bio: create slab <bio-0> at 0 |
| | [ 0.920000] PCI host bridge to bus 0000:00 |
| | [ 0.930000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff] |
| | [ 0.930000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff] |
| | [ 0.940000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] |
| | [ 0.950000] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060000 |
| | [ 0.950000] ifx_pcie_rc_class_early_fixup port 0: fixed pcie host bridge to pci-pci bridge |
| | [ 0.960000] pci 0000:00:00.0: PME# supported from D0 D3hot |
| | [ 0.960000] pci 0000:01:00.0: [168c:abcd] type 00 class 0x020000 |
| | [ 0.960000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0001ffff 64bit] |
| | [ 0.960000] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] |
| | [ 0.960000] pci 0000:01:00.0: supports D1 |
| | [ 0.960000] pci 0000:01:00.0: PME# supported from D0 D1 D3hot |
| | [ 0.960000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 |
| | [ 0.960000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 |
| | [ 0.960000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff] |
| | [ 0.960000] pci 0000:00:00.0: BAR 9: assigned [mem 0x1c100000-0x1c1fffff pref] |
| | [ 0.970000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c01ffff 64bit] |
| | [ 0.970000] pci 0000:01:00.0: BAR 6: assigned [mem 0x1c100000-0x1c10ffff pref] |
| | [ 0.980000] pci 0000:00:00.0: PCI bridge to [bus 01] |
| | [ 0.980000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff] |
| | [ 0.990000] pci 0000:00:00.0: bridge window [mem 0x1c100000-0x1c1fffff pref] |
| | [ 0.990000] NET: Registered protocol family 8 |
| | [ 1.000000] NET: Registered protocol family 20 |
| | [ 1.000000] Switching to clocksource MIPS |
| | [ 1.050000] NET: Registered protocol family 2 |
| | [ 1.050000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) |
| | [ 1.060000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) |
| | [ 1.060000] TCP: Hash tables configured (established 1024 bind 1024) |
| | [ 1.070000] TCP: reno registered |
| | [ 1.070000] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| | [ 1.080000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| | [ 1.090000] avm_pa: try to activate hw accelaration for pid 1 (ipv4) |
| | [ 1.090000] NET: Registered protocol family 1 |
| | [ 1.100000] PCI: CLS 0 bytes, default 32 |
| | [ 1.100000] Lantiq CGU driver, version 1.1.32, (c) 2001-2011 Lantiq Deutschland GmbH |
| | [ 1.120000] IFX DMA driver, version ifxmips_dma_core.c:v1.0.17, (c) 2009 Infineon Technologies AG skb_shared_size:184 |
| | [ 1.130000] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| | [ 1.140000] fuse init (API version 7.22) |
| | [ 1.140000] yaffs: yaffs built Feb 8 2017 18:14:21 Installing. |
| | [ 1.140000] msgmni has been set to 209 |
| | [ 1.150000] io scheduler noop registered (default) |
| | [ 1.150000] [avm_membench_init] |
| | [ 1.490000] ttyS0 at MMIO 0x1e100c00 (irq = 107) is a PORT_IFX_ASC |
| | [ 1.500000] ifx_usif_uart_init: uart_register_driver failed |
| | [ 1.500000] avm_net_trace: Up and running. |
| | [ 1.510000] [loadcontrol] set auto - scale=1 |
| | [ 1.510000] [avm] configured: watchdog event debug |
| | [ 1.510000] AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Feb 8 2017 18:14:21) |
| | [ 1.510000] Lantiq Thermal Sensor driver, version 1.0.3, (c) 2001-2011 Lantiq Deutschland GmbH |
| | [ 1.520000] ifx_pmu_init: Major 244 |
| | [ 1.520000] Lantiq PMU driver, version 1.2.6, (c) 2001-2011 Lantiq Deutschland GmbH |
| | [ 1.530000] Lantiq GPIO driver, version 1.3.2, (c) 2001-2011 Lantiq Deutschland GmbH |
| | [ 1.540000] Infineon Technologies RCU driver version 1.0.7 |
| | [ 1.560000] loop: module loaded |
| | [ 1.560000] nbd: registered device at major 43 |
| | [ 1.590000] Generic platform RAM MTD, (c) 2004 Simtec Electronics |
| | [ 1.590000] [HSNAND] Hardware-ECC activated |
| | [ 1.600000] ONFI param page 0 valid |
| | [ 1.600000] ONFI flash detected |
| | [ 1.600000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABADAWP), 128MiB, page size: 2048, OOB size: 64 |
| | [ 1.610000] Scanning device for bad blocks |
| | [ 1.710000] Creating 6 MTD partitions on "ifx_hsnand": |
| | [ 1.710000] 0x000000000000-0x000000400000 : "reserved-kernel" |
| | [ 1.720000] 0x000000400000-0x000003400000 : "reserved-filesystem" |
| | [ 1.730000] 0x000003400000-0x000003800000 : "kernel" |
| | [ 1.740000] 0x000003800000-0x000006800000 : "filesystem" |
| | [ 1.740000] 0x000006800000-0x000006a00000 : "config" |
| | [ 1.750000] 0x000006a00000-0x000008000000 : "nand-filesystem" |
| | [ 1.760000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_hsnand |
| | [ 1.770000] {ifx_sflash_setbaudrate} VR9 A21 high baudrate support |
| | [ 1.770000] SPI Device: MX25P2005 0xC2 (MX) 0x20 0x12 |
| | [ 1.770000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_sflash |
| | [ 1.770000] Creating 3 MTD partitions on "ifx_sflash": |
| | [ 1.780000] 0x000000000000-0x000000020000 : "urlader" |
| | [ 1.790000] 0x000000020000-0x000000030000 : "tffs (1)" |
| | [ 1.790000] 0x000000030000-0x000000040000 : "tffs (2)" |
| | [ 1.800000] Lantiq SPI flash driver, version 2.0.2, (c) 2001-2011 Lantiq Deutschland GmbH |
| | [ 1.810000] tun: Universal TUN/TAP device driver, 1.6 |
| | [ 1.810000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| | [ 1.820000] IFX SWITCH API, Version 1.1.8.5 |
| | [ 1.820000] SWAPI: Registered character device [switch_api] with major no [81] |
| | [ 1.830000] Switch API: PCE MicroCode loaded !! |
| | [ 1.830000] i2c /dev entries driver |
| | [ 1.830000] cpuidle: using governor ladder |
| | [ 1.830000] cpuidle: using governor menu |
| | [ 1.840000] AVM PA for Linux 3.10.73 |
| | [ 1.840000] AVM PA skb pktinfo at offset 136 size 208 |
| | [ 1.850000] [loadcontrol]module avm_pa registered |
| | [ 1.850000] u32 classifier |
| | [ 1.850000] Performance counters on |
| | [ 1.860000] Actions configured |
| | [ 1.860000] ipip: IPv4 over IPv4 tunneling driver |
| | [ 1.870000] TCP: cubic registered |
| | [ 1.870000] NET: Registered protocol family 10 |
| | [ 1.870000] avm_pa: try to activate hw accelaration for pid 2 (ipv6) |
| | [ 1.880000] sit: IPv6 over IPv4 tunneling driver |
| | [ 1.890000] NET: Registered protocol family 17 |
| | [ 1.890000] Bridge broadcast ratelimiter registered |
| | [ 1.890000] KOAM is loaded successfully. |
| | [ 1.890000] l2tp_core: L2TP core driver, V2.0 |
| | [ 1.900000] l2tp_ip: L2TP IP encapsulation support (L2TPv3) |
| | [ 1.900000] l2tp_netlink: L2TP netlink interface |
| | [ 1.910000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) |
| | [ 1.910000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) |
| | [ 1.920000] 8021q: 802.1Q VLAN Support v1.8 |
| | [ 1.930000] Key type dns_resolver registered |
| | [ 1.930000] <ifx_fix_timing> |
| | [ 1.940000] [TFFS3_Init] No storage module registered, trying legacy fallback |
| | [ 1.940000] [TFFS3_Register_LGCY] Called |
| | [ 1.950000] [TFFS3_LGCY_Configure] Called |
| | [ 1.950000] [TFFS3_LGCY_Setup] using mtd7(tffs (1)), mtd8(tffs (2)) |
| | [ 1.960000] [TFFS3_LGCY_Setup] mtd "tffs (1)": segment value 4 |
| | [ 1.960000] [TFFS3_LGCY_Setup] mtd "tffs (2)": segment value 5 |
| | [ 1.970000] [TFFS3_LGCY_Setup] Using segment 5 (avail: 4 + 5) |
| | [ 1.970000] [TFFS3_LGCY_Setup] mtd8 size=0x10000 |
| | [ 1.980000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0) |
| | [ 1.980000] [rescan_segment] Called with mode=2 |
| | [ 1.980000] TFFS: Clearing index for update |
| | [ 1.990000] Adam2 environment variables API installed. |
| | [ 2.000000] AVM Simple Profiling enabled Version 3.0 |
| | [ 2.000000] [simple-profiling]:2 performance counters implemented, NEW_34K |
| | [ 2.010000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=0) all cores tc: 0 |
| | [ 2.020000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=0) all cores tc: 0 |
| | [ 2.030000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=1) all cores tc: 1 |
| | [ 2.050000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=1) all cores tc: 1 |
| | [ 2.060000] [simple-profiling]Enable Performance Counter 0 for Main pipeline stalls (P) (User Supervisor Kernel Exception TC-ID=2) all cores tc: 2 |
| | [ 2.070000] [simple-profiling]Enable Performance Counter 1 for Cycles (P) (User Supervisor Kernel Exception TC-ID=2) all cores tc: 2 |
| | [ 2.080000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=3) all cores tc: 3 |
| | [ 2.100000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=3) all cores tc: 3 |
| | [ 2.110000] [simple-profiling]all cores:performance-mode (round-robin): cpus on |
| | [ 2.120000] {avmnet_cfg_netinit} |
| | [ 2.120000] [avmnet] No config found for HWRev 177, HWSubRev 5, Profile-ID 0, trying base config for HWSubRev |
| | [ 2.130000] [avmnet] No config found for HWRev 177, HWSubRev 5, trying base config for HWRev |
| | [ 2.140000] [avmnet] [avmnet_swi_7port_init] Init on module swi_vr9 called. |
| | [ 2.600000] Loading AVM Net Common Datapath Driver for 7Port Switch...... |
| | [ 2.600000] [ppe_eth_init] init_hw() |
| | [ 2.600000] [init_hw] ppe_hw_init=0xff successful |
| | [ 2.610000] [ppe_eth_init] ifx_proc_file_create() |
| | [ 2.610000] [ppe_eth_init] dma_setup_init() |
| | [ 2.620000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x68 |
| | [ 2.630000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x68 |
| | [ 5.790000] avm_pa: try to activate hw accelaration for pid 1 (ipv4) |
| | [ 5.800000] avm_pa: tx channel activated, pid 1 (ipv4) |
| | [ 5.800000] avm_pa: try to activate hw accelaration for pid 2 (ipv6) |
| | [ 5.810000] avm_pa: tx channel activated, pid 2 (ipv6) |
| | [ 5.820000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth0): 5c:49:79:4d:a3:00 |
| | [ 5.830000] avmnet: avm_pa: register pid eth0 |
| | [ 5.830000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth1): 5c:49:79:4d:a3:01 |
| | [ 5.840000] avmnet: avm_pa: register pid eth1 |
| | [ 5.840000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth2): 5c:49:79:4d:a3:04 |
| | [ 5.850000] avmnet: avm_pa: register pid eth2 |
| | [ 5.850000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth3): 5c:49:79:4d:a3:05 |
| | [ 5.860000] avmnet: avm_pa: register pid eth3 |
| | [ 5.910000] SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock3 |
| | [ 5.920000] yaffs: dev is 32505859 name is "mtdblock3" ro |
| | [ 5.920000] yaffs: passed flags "" |
| | [ 5.930000] yaffs: yaffs: Attempting MTD mount of 31.3,"mtdblock3" |
| | [ 5.930000] yaffs: auto selecting yaffs2 |
| | [ 5.950000] yaffs: yaffs_read_super: is_checkpointed 1 |
| | [ 5.950000] VFS: Mounted root (yaffs filesystem) readonly on device 31:3. |
| | [ 5.960000] devtmpfs: mounted |
| | [ 5.960000] Freeing unused kernel memory: 292K (80857000 - 808a0000) |
| | [ 7.070000] TFFS Name Table L |
| | [ 7.210000] yaffs: dev is 32505860 name is "mtdblock4" rw |
| | [ 7.220000] yaffs: passed flags "" |
| | [ 7.220000] yaffs: yaffs: Attempting MTD mount of 31.4,"mtdblock4" |
| | [ 7.250000] yaffs: yaffs_read_super: is_checkpointed 0 |
| | [ 9.130000] led_modul_Fritz_Box_6840: module license '(C) Copyright 2012 by AVM' taints kernel. |
| | [ 9.140000] Disabling lock debugging due to kernel taint |
| | [ 9.150000] [module-alloc-by-name] give 0x1d000 bytes at 0x81105000 to module 'led_modul_Fritz_Box_6840' (0xcab000 bytes left) |
| | [ 9.170000] [LED] use GPIO 32 for 'gpio_avm_led_power' |
| | [ 9.180000] [LED] use GPIO 38 for 'gpio_avm_led_internet' |
| | [ 9.180000] [LED] use GPIO 35 for 'gpio_avm_led_dect' |
| | [ 9.190000] [LED] use GPIO 36 for 'gpio_avm_led_wlan' |
| | [ 9.190000] [LED] use GPIO 47 for 'gpio_avm_led_info' |
| | [ 9.200000] [LED] use GPIO 34 for 'gpio_avm_led_info_red' |
| | [ 9.200000] [BUTTON] use GPIO 29 for 'gpio_avm_button_wlan' |
| | [ 9.210000] [BUTTON] use GPIO 1 for 'gpio_avm_button_dect' |
| | [ 9.230000] AVM_WATCHDOG: System Init UEberwachung 120 Sekunden |
| | [ 9.630000] [module-alloc-by-name] give 0x3000 bytes at 0x81122000 to module 'rtc_avm' (0xca8000 bytes left) |
| | [ 9.650000] rtc-avm rtc-avm.0: rtc core: registered avm as rtc0 |
| | [ 9.650000] [avm-rtc]: avm_rtc_probe: register: ret=0x87711800 |
| | [ 9.660000] [avm-rtc]: avm_rtc_probe: success |
| | [ 9.850000] |
| | [avm_debug] redirecting kernel-messages (/dev/debug) |
| | [ 9.880000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x7d62) |
| | [ 9.880000] {micron_read_hwecc} page 0x7d62 Sec 0 1 Berr 0 OOB 0 ECC |
| | [ 9.910000] [module-alloc-by-name] give 0xe000 bytes at 0x81125000 to module 'Piglet_noemif' (0xc9a000 bytes left) |
| | [ 9.920000] [piglet]use settings for 177(1 gpio from hw_config) |
| | |
| | [ 10.020000] [piglet]patch_dectfw: c0165000, totallen = 48032(bba0) |
| | [ 10.020000] [piglet]patch_dectfw: patch_adress: a0 max_len: 26 with Version 2 Len: 17 |
| | [ 10.020000] [piglet]patch_dectfw: RFPI tag found 029663cf30 |
| | [ 10.030000] [piglet]patch_dectfw: dectmode 1 |
| | [ 10.030000] [piglet]dect_loader144xx: slow-bootmode |
| | [ 10.770000] system-load 6 loadavg 0.15 0.3 0.1 - 38 tasks:67 % curr:modprobe(7 %) max:init(36 %, pid:1) pgstat: sum=26387 free=22023 slab=2732 alloc=1718/s fault=2560/s (sleep 2) |
| | [ 10.850000] * |
| | [ 11.130000] ********************************************************************************************* |
| | [ 13.220000] [piglet]dect144xx_file_process: upload of '/lib/modules/dectfw_secondlevel_441.hex' successfull |
| | [ 15.330000] [piglet]TDM: FS: 8005 Hz CLK: 1023930 Hz |
| | [ 15.650000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x740c) |
| | [ 15.660000] {micron_read_hwecc} page 0x740c Sec 1 1 Berr 0 OOB 0 ECC |
| | [ 15.660000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x7415) |
| | [ 15.660000] {micron_read_hwecc} page 0x7415 Sec 1 1 Berr 0 OOB 0 ECC |
| | [ 15.810000] yaffs: dev is 32505861 name is "mtdblock5" rw |
| | [ 15.810000] yaffs: passed flags "" |
| | [ 15.810000] yaffs: yaffs: Attempting MTD mount of 31.5,"mtdblock5" |
| | [ 15.860000] yaffs: yaffs_read_super: is_checkpointed 0 |
| | [ 15.930000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x72c2) |
| | [ 15.930000] {micron_read_hwecc} page 0x72c2 Sec 2 1 Berr 0 OOB 0 ECC |
| | [ 16.190000] [module-alloc-by-name] give 0x75000 bytes at 0x81133000 to module 'pcmlink' (0xc25000 bytes left) |
| | [ 16.290000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x800b) |
| | [ 16.290000] {micron_read_hwecc} page 0x800b Sec 0 1 Berr 0 OOB 0 ECC |
| | [ 16.640000] [module-alloc-by-name] give 0xce000 bytes at 0x811a8000 to module 'isdn_fbox_fon5' (0xb57000 bytes left) |
| | [ 16.690000] [capi_oslib]avm_stack_attach: cpu1 -> cpu1 |
| | [ 16.690000] [pcmlink]chrony-support |
| | [ 16.710000] [isdn]PCMLINK: svnVersion: 2496 (isdn: 3215) Codecslots=6 Slics=1 Pots=1 TE=0 NT=0 DECT=4 (IA3222) no HwCross DSP-EC: 0 |
| | [ 17.130000] [module-alloc-by-name] give 0x69000 bytes at 0x81276000 to module 'capi_codec' (0xaee000 bytes left) |
| | [ 17.340000] [module-alloc-by-name] give 0x50000 bytes at 0x812df000 to module 'avm_dect' (0xa9e000 bytes left) |
| | [ 17.390000] [module-alloc-by-name] give 0x5000 bytes at 0x8132f000 to module 'dect_io' (0xa99000 bytes left) |
| | [ 17.390000] [DECTDRV_ERR] fpCap ext data queueSize 2560, avmTpui 4096/36865, etsiTpui 40961/0 |
| | [ 17.890000] udevd[1272]: starting version 175 |
| | [ 18.130000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x81fc) |
| | [ 18.130000] {micron_read_hwecc} page 0x81fc Sec 1 1 Berr 0 OOB 0 ECC |
| | [ 18.150000] [module-alloc-by-name] give 0x2000 bytes at 0x81334000 to module 'usb_common' (0xa97000 bytes left) |
| | [ 18.300000] [module-alloc-by-name] give 0x35000 bytes at 0x81336000 to module 'usbcore' (0xa62000 bytes left) |
| | [ 18.320000] usbcore: registered new interface driver usbfs |
| | [ 18.320000] usbcore: registered new interface driver hub |
| | [ 18.320000] usbcore: registered new device driver usb |
| | [ 18.540000] [module-alloc-by-name] give 0x21000 bytes at 0x8136b000 to module 'ltqusb_host' (0xa41000 bytes left) |
| | [ 18.560000] LTQUSB: ltqusb_hcd: version 4.0 B140513 |
| | [ 18.560000] LTQUSB: OPTION: __PHY_LONG_PREEMP__ |
| | [ 18.560000] LTQUSB: OPTION: __UNALIGNED_BUF_ADJ__ |
| | [ 18.560000] LTQUSB: OPTION: __NEW_COC__ |
| | [ 18.560000] LTQUSB: __INTRNAKRETRY__ |
| | [ 18.560000] LTQUSB: __INTRINCRETRY__ |
| | [ 18.560000] Chip Version :000b BurstSize=4 |
| | [ 18.950000] system-load 5 loadavg 0.22 0.5 0.2 - 53 tasks:13 % curr:modprobe(2 %) max:migration/1(7 %, pid:12) pgstat: sum=26249 free=19495 slab=3228 alloc=614/s fault=1064/s (sleep 1) |
| | [ 19.170000] LTQUSB: USB core #0 soft-reset |
| | [ 19.470000] LTQUSB: USB core #0 soft-reset |
| | [ 19.470000] hcd Prot1:60 079e 1950 Prot2:70 70000 SingleXact:0 |
| | [ 19.470000] LTQUSB: ltqhcd_init: req yield ret =9 |
| | [ 19.470000] lantiq,ltqusb lantiq,ltqusb: Lantiq USB Controller |
| | [ 19.470000] lantiq,ltqusb lantiq,ltqusb: new USB bus registered, assigned bus number 1 |
| | [ 19.470000] lantiq,ltqusb lantiq,ltqusb: irq 13, io mem 0xbe101000 |
| | [ 19.470000] LTQUSB: VBus1 registered IO#14 |
| | [ 19.470000] LTQUSB: Init: Power Port (0) |
| | [ 19.470000] LTQUSB: PORT POWER gpio = 14 on, delay 500ms |
| | [ 19.980000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| | [ 19.980000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| | [ 19.980000] usb usb1: Product: Lantiq USB Controller |
| | [ 19.980000] usb usb1: Manufacturer: Linux 3.10.73 ltqusb_hcd_1 |
| | [ 19.980000] usb usb1: SerialNumber: ltqusb_hcd_1 |
| | [ 19.980000] hub 1-0:1.0: USB hub found |
| | [ 19.980000] hub 1-0:1.0: 1 port detected |
| | [ 19.980000] avm_net_trace: New net trace device 'usb1' registered with minor 161. |
| | [ 20.490000] LTQUSB: USB core #1 soft-reset |
| | [ 20.800000] LTQUSB: USB core #1 soft-reset |
| | [ 20.800000] hcd Prot1:60 079e 1950 Prot2:70 70000 SingleXact:0 |
| | [ 20.800000] LTQUSB: ltqhcd_init: req yield ret =8 |
| | [ 20.800000] lantiq,ltqusb lantiq,ltqusb: Lantiq USB Controller |
| | [ 20.800000] lantiq,ltqusb lantiq,ltqusb: new USB bus registered, assigned bus number 2 |
| | [ 20.800000] lantiq,ltqusb lantiq,ltqusb: irq 14, io mem 0xbe106000 |
| | [ 20.800000] LTQUSB: VBus2 registered IO#5 |
| | [ 20.800000] LTQUSB: Init: Power Port (0) |
| | [ 20.800000] LTQUSB: PORT POWER gpio = 5 on, delay 500ms |
| | [ 21.310000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| | [ 21.310000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| | [ 21.310000] usb usb2: Product: Lantiq USB Controller |
| | [ 21.310000] usb usb2: Manufacturer: Linux 3.10.73 ltqusb_hcd_2 |
| | [ 21.310000] usb usb2: SerialNumber: ltqusb_hcd_2 |
| | [ 21.320000] [sched_delayed] sched: RT throttling activated |
| | [ 21.320000] avm_net_trace: udev device avm_net_trace161 created |
| | [ 21.320000] hub 2-0:1.0: USB hub found |
| | [ 21.320000] hub 2-0:1.0: 1 port detected |
| | [ 21.320000] avm_net_trace: New net trace device 'usb2' registered with minor 162. |
| | [ 21.340000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x85c5) |
| | [ 21.340000] {micron_read_hwecc} page 0x85c5 Sec 1 1 Berr 0 OOB 0 ECC |
| | [ 21.400000] avm_net_trace: udev device avm_net_trace162 created |
| | [ 21.730000] usb 2-1: new high-speed USB device number 2 using lantiq,ltqusb |
| | [ 21.960000] usb 2-1: New USB device found, idVendor=216f, idProduct=0041 |
| | [ 21.960000] usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 |
| | [ 21.960000] usb 2-1: Product: Altair USB Product |
| | [ 21.960000] usb 2-1: Manufacturer: Altair |
| | [ 21.960000] usb 2-1: SerialNumber: F320AF3405497 |
| | [ 21.960000] Bus#2 connect: AVM Powermeter changed to 100 mA |
| | [ 21.970000] Bus#2 config: AVM Powermeter changed to 100 mA |
| | [ 22.690000] system-load 5 loadavg 0.60 0.13 0.4 - 65 tasks:33 % curr:udevd(1 %) max:watchdog/0(11 %, pid:10) pgstat: sum=26221 free=18130 slab=3534 alloc=649/s fault=744/s (sleep 3) |
| | [ 25.390000] [module-alloc-by-name] give 0x1cd000 bytes at 0x8138c000 to module 'kdsldmod' (0x874000 bytes left) |
| | [ 25.540000] kdsldmod: init start (Jun 1 2017 17:36:04) sizeof(struct sk_buff)=448 |
| | [ 25.550000] userman: device registerd (userman_url) with major=233 |
| | [ 25.550000] kdsld: ttychannel: ldisc 8 registered |
| | [ 25.550000] PCP_NL: PCP netlink interface (multicast group 1) |
| | [ 25.550000] kdsldmod: init done (Jun 1 2017 17:36:02) |
| | [ 28.430000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8bca) |
| | [ 28.430000] {micron_read_hwecc} page 0x8bca Sec 0 1 Berr 0 OOB 0 ECC |
| | [ 29.600000] [avm_power] eth: port 0 force normal CON t0 |
| | [ 29.600000] [avm_power] eth: port 1 force throttle CON t0 |
| | [ 29.610000] [avm_power] eth: port 2 force throttle CON t0 |
| | [ 29.610000] [avm_power] eth: port 3 force throttle CON t0 |
| | [ 30.780000] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready |
| | [ 30.780000] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready |
| | [ 30.790000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| | [ 30.790000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready |
| | [ 30.790000] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready |
| | [ 30.800000] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready |
| | [ 31.810000] IPv6: ADDRCONF(NETDEV_UP): guest: link is not ready |
| | [ 31.820000] IPv6: ADDRCONF(NETDEV_UP): guest: link is not ready |
| | [ 32.930000] system-load 100% loadavg 0.67 0.16 0.5 - 63 tasks:43 % curr:ctlmgr(15 %) max:ctlmgr(15 %, pid:2283) pgstat: sum=27441 free=12813 slab=4402 alloc=1940/s fault=3128/s (sleep 11) |
| | [ 34.420000] [module-alloc-by-name] give 0x27000 bytes at 0x81559000 to module 'aae' (0x84d000 bytes left) |
| | [ 34.480000] [wlan_config] Given config is: |
| | [ 34.480000] [wlan_config] hw_interface=0 chip_type=6 (osprey) offload=1 (non) |
| | [ 34.480000] [wlan_config] hwrev=177 hwsubrev=5 maca=5c:49:79:4d:a3:00 |
| | [ 34.480000] [wlan_eeprom] Calibration data blocks found = 1 |
| | [ 34.480000] [wlan_eeprom] EEPROM #1, type "AR93xx/AR95xx": |
| | [ 34.480000] [wlan_eeprom] Customer data="xb112-041-f0000" |
| | [ 34.480000] [wlan_eeprom] regDmn=0x8114 - patching to 0 |
| | [ 34.480000] [wlan_eeprom] MinCCAPwr thresh set to 2GHz:-70,-70,-70 5GHz:-1,0,0 |
| | [ 34.480000] [wlan_eeprom] Build with ART2 4.4 |
| | [ 34.480000] avm_net_trace: New net trace device 'WLAN Management Traffic' registered with minor 128. |
| | [ 34.490000] kdsld: kdsld_vcc_preunregister: * |
| | [ 34.490000] kdsld: nr_ipv4 0 nr_ipv6 0 nr_vpn 0 |
| | [ 34.500000] avm_net_trace: udev device avm_net_trace128 created |
| | [ 34.550000] kdsld: flushing internet sessions |
| | [ 34.740000] kdsld: kdsld_vcc_preregister: prelte1 |
| | [ 34.740000] kdsld: kdsld_vcc_preregister: vcc->ifaces= (null) |
| | [ 34.740000] kdsld: IPv6: internet: link local fe80::5e49:79ff:fe4d:a303 remote :: |
| | [ 34.740000] kdsld: internet: set_rcv_ipaddr: 192.168.178.1 |
| | [ 34.890000] [module-alloc-by-name] give 0x7000 bytes at 0x81580000 to module 'adf' (0x846000 bytes left) |
| | [ 34.910000] ****Address of trace_timer :81583100 |
| | [ 34.940000] system-load 3 loadavg 0.67 0.16 0.5 - 68 tasks:19 % curr:ctlmgr(6 %) max:ctlmgr(6 %, pid:2283) pgstat: sum=27635 free=11088 slab=4592 alloc=406/s fault=673/s (sleep 0) |
| | [ 34.990000] [module-alloc-by-name] give 0x4000 bytes at 0x81587000 to module 'asf' (0x842000 bytes left) |
| | [ 35.660000] [module-alloc-by-name] give 0xb7000 bytes at 0x8158b000 to module 'ath_hal' (0x78b000 bytes left) |
| | [ 35.680000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D) |
| | [ 35.740000] [module-alloc-by-name] give 0x9000 bytes at 0x81642000 to module 'ath_rate_atheros' (0x782000 bytes left) |
| | [ 35.750000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved |
| | [ 35.870000] [module-alloc-by-name] give 0xc000 bytes at 0x8164b000 to module 'ath_spectral' (0x776000 bytes left) |
| | [ 35.890000] ath_spectral: Version 2.0.0Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved |
| | [ 35.890000] SPECTRAL module built on Mar 1 2017 15:01:52 |
| | [ 35.960000] [module-alloc-by-name] give 0x14000 bytes at 0x81657000 to module 'ath_dfs' (0x762000 bytes left) |
| | [ 36.000000] ath_dfs: Version 2.0.0Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved |
| | [ 36.500000] [module-alloc-by-name] give 0x5f000 bytes at 0x8166b000 to module 'ath_dev' (0x703000 bytes left) |
| | [ 36.550000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved |
| | [ 37.430000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8fb0) |
| | [ 37.430000] {micron_read_hwecc} page 0x8fb0 Sec 2 1 Berr 0 OOB 0 ECC |
| | [ 38.250000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8878) |
| | [ 38.250000] {micron_read_hwecc} page 0x8878 Sec 0 1 Berr 0 OOB 0 ECC |
| | [ 38.610000] [module-alloc-by-name] give 0x119000 bytes at 0x816ca000 to module 'umac' (0x5ea000 bytes left) |
| | [ 38.750000] ath_pci: SmartAntenna-DRT-0.1 (Atheros/multi-bss) |
| | [ 38.750000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002) |
| | [ 38.750000] __ath_attach: Set global_scn[0] |
| | [ 38.760000] ART Version : 72.117 SW Image Version : 0.41.24.0.0 Board Revision : |
| | [ 38.760000] ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125 |
| | [ 38.770000] SPECTRAL : get_capability not registered |
| | [ 38.770000] HAL_CAP_PHYDIAG : Capable |
| | [ 38.770000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231) |
| | [ 38.770000] SPECTRAL : get_capability not registered |
| | [ 38.770000] HAL_CAP_RADAR : Capable |
| | [ 38.770000] SPECTRAL : Need to fix the capablity check for SPECTRAL (spectral_attach : 236) |
| | [ 38.770000] SPECTRAL : get_capability not registered |
| | [ 38.770000] HAL_CAP_SPECTRAL_SCAN : Capable |
| | [ 38.770000] SPECTRAL : get_tsf64 not registered |
| | [ 38.770000] spectral_init_netlink 83 NULL SKB |
| | [ 38.770000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT |
| | [ 38.770000] SPECTRAL :----- module attached |
| | [ 38.770000] GreenAP on wifi%d: Attached |
| | [ 38.770000] ath_get_caps[6416] rx chainmask mismatch actual 7 sc_chainmak 0 |
| | [ 38.770000] ath_get_caps[6391] tx chainmask mismatch actual 7 sc_chainmak 0 |
| | [ 38.770000] ic_num_chains=3x3 |
| | [ 38.770000] _avm_ath_ext_attach_ah:169 |
| | [ 38.780000] band steering initialized for direct attach hardware |
| | [ 38.780000] ieee80211_bsteering_attach: Band steering initialized |
| | [ 38.780000] ath_attach_dfs[13067] dfsdomain 1 |
| | [ 38.790000] SPECTRAL : module already attached |
| | [ 38.790000] osif_wrap_attach:321 osif wrap attached |
| | [ 38.790000] osif_wrap_devt_init:946 osif wrap dev table init done |
| | [ 38.800000] request_irq type = 0x80 |
| | [ 38.860000] avm_net_trace: New net trace device 'HW (2.4 + 5 GHz, wifi0)' registered with minor 129. |
| | [ 38.860000] Register net trace device succeeded with minor 129 (wifi0). |
| | [ 38.860000] wifi0: Atheros ???: mem=0x1c000000, irq=138 hw_base=0xbc000000 |
| | [ 38.870000] _avm_ath_ext_attach_ieee:151 |
| | [ 38.920000] avm_net_trace: udev device avm_net_trace129 created |
| | [ 39.080000] [module-alloc-by-name] give 0x18000 bytes at 0x817e3000 to module 'userman_mod' (0x5d2000 bytes left) |
| | [ 39.110000] userman: LAN Client Internet-Accounting and Blocking |
| | [ 39.110000] userman: device registerd with major=231 |
| | [ 39.110000] userman: init ok |
| | [ 39.300000] [module-alloc-by-name] give 0x6000 bytes at 0x817fb000 to module 'ath_pktlog' (0x5cc000 bytes left) |
| | [ 39.590000] avm_pa: prioack enable |
| | [ 39.590000] avm_pa: prioack tgetenable |
| | [ 39.590000] avm_pa: priomap: not enough parameters |
| | [ 39.590000] avm_pa: priomap: not enough parameters |
| | [ 39.590000] avm_pa: priomap: not enough parameters |
| | [ 39.590000] avm_pa: priomap: not enough parameters |
| | [ 39.650000] [module-alloc-by-name] give 0x26000 bytes at 0x81801000 to module 'krtp' (0x5a6000 bytes left) |
| | [ 39.670000] krtp: rtp_fastpath_register done |
| | [ 39.680000] krtp: krtp_init done |
| | [ 39.680000] jitterbuffer_set_config: auto_on 1 ms 50 packets 0 |
| | [ 39.680000] avm_pa: telephony_reduce 65 |
| | [ 39.680000] avm_pa: mswin 300 400 |
| | [ 39.810000] [DECTDRV_ERR] API_FP_MAC_START_STOP_REQ 255 -> 0 |
| | [ 39.830000] [DECTDRV_ERR] fpCap ext data queueSize 2560, avmTpui 4096/36865, etsiTpui 40961/0 |
| | [ 39.880000] [DECTDRV_ERR] fpCap ext data queueSize 2560, avmTpui 4096/36865, etsiTpui 40961/0 |
| | [ 40.590000] [DECTDRV_ERR] API_FP_MAC_START_STOP_REQ 0 -> 0 |
| | [ 40.610000] [DECTDRV_ERR] fpCap ext data queueSize 2560, avmTpui 4096/36865, etsiTpui 40961/0 |
| | [ 40.640000] [module-alloc-by-name] give 0x4000 bytes at 0x81827000 to module 'ueservice' (0x5a2000 bytes left) |
| | [ 40.660000] usbcore: registered new interface driver ueservice |
| | [ 40.660000] [DECTDRV_ERR] API_FP_MAC_START_STOP_REQ 0 -> 0 |
| | [ 40.670000] [DECTDRV_ERR] fpCap ext data queueSize 2560, avmTpui 4096/36865, etsiTpui 40961/0 |
| | [ 40.760000] [module-alloc-by-name] give 0xa000 bytes at 0x8182b000 to module 'usbnet' (0x598000 bytes left) |
| | [ 40.840000] [module-alloc-by-name] give 0x4000 bytes at 0x81835000 to module 'cdc_ether' (0x594000 bytes left) |
| | [ 40.850000] usbcore: registered new interface driver cdc_ether |
| | [ 40.880000] [module-alloc-by-name] give 0x7000 bytes at 0x81839000 to module 'ue_lte' (0x58d000 bytes left) |
| | [ 40.920000] Send concat format change command: 4 chars, control msg returned 4 |
| | [ 40.930000] usbcore: registered new interface driver ue_altair |
| | [ 41.100000] LTQUSB: LTQUSB DEV 2 EP 83 HC 1 HALT |
| | [ 41.100000] LTQUSB: LTQUSB HC HALT 2 hcchar = 0x80989a00, hcint = 0x10, hcintmsk = 0x2, hctsiz = 0x40080200 |
| | [ 41.100000] LTQUSB: LTQUSB HC HALT 5 hcchar = 0xc0989a00, hcint = 0x0, hcintmsk = 0x2, hctsiz = 0x40080200 |
| | [ 41.100000] LTQUSB: LTQUSB HC HALT 5 after 0 iterations hcchar = 0x989a00, hcint = 0x2, hcintmsk = 0x2, hctsiz = 0x40080200 |
| | [ 41.100000] LTQUSB: LTQUSB DEV 2 EP 83 HC 1 Complete dequeueing urb 836da5c0, urbd 836dd880 |
| | [ 41.100000] LTQUSB: LTQUSB need_comp = 1 complete_inuse = 0 |
| | [ 41.130000] LTE_UDEV_TTY_ADD: LTE using /dev/ttyLTE0 as AT channel |
| | [ 41.170000] ath_attach_dfs[13067] dfsdomain 1 |
| | [ 41.250000] Requested VPA id 0 and MAC 5c:49:79:4d:a3:02 |
| | [ 41.260000] avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 131. |
| | [ 41.260000] Register vap net trace device succeeded with minor 131 (ath0). |
| | [ 41.260000] avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 132. |
| | [ 41.260000] Register vap net trace device succeeded with minor 132 (ath0). |
| | [ 41.260000] VAP device ath0 created osifp: (86fdac20) os_if: (834bc000) |
| | [ 41.330000] avm_net_trace: udev device avm_net_trace131 created |
| | [ 41.330000] LTE_UDEV_UESERVICE_ADD: Found Altair bootloader, running FWLoaderApp |
| | [ 41.350000] avm_net_trace: udev device avm_net_trace132 created |
| | [ 41.350000] ath0: registered PID at AVM_PA |
| | [ 41.350000] avm_pa: try to activate hw accelaration for pid 10 (ath0) |
| | [ 41.350000] avm_pa: rx channel activated, pid 10 (ath0) |
| | [ 41.350000] avm_pa: tx channel activated, pid 10 (ath0) |
| | [ 41.350000] ath0: registered VPID at AVM_PA |
| | [ 41.350000] DES SSID SET=FRITZ!Box 6840 LTE |
| | [ 41.350000] ACFG vendor param set fail, AVM mcast-to-ucast deactivated |
| | [ 41.480000] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 |
| | [ 41.520000] DEVICE IS DOWN ifname=ath0 |
| | [ 41.520000] DEVICE IS DOWN ifname=ath0 |
| | [ 41.780000] LTE using /usr/share/lte/image.bin. |
| | [ 42.200000] Warning: node not in table 0x857e2000 |
| | [ 42.360000] 8021q: adding VLAN 0 to HW filter on device ath0 |
| | [ 42.380000] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready |
| | [ 43.070000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8d18) |
| | [ 43.070000] {micron_read_hwecc} page 0x8d18 Sec 3 1 Berr 0 OOB 0 ECC |
| | [ 43.080000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8d2b) |
| | [ 43.080000] {micron_read_hwecc} page 0x8d2b Sec 3 1 Berr 0 OOB 0 ECC |
| | [ 45.130000] system-load 100% loadavg 1.57 0.37 0.12 - 95 tasks:85 % curr:pidof(0 %) max:kworker/1:1H(13 %, pid:1182) pgstat: sum=28610 free=5282 slab=6058 alloc=2265/s fault=3349/s (sleep 11) |
| | [ 45.320000] AVM_WATCHDOG: System Init UEberwachung abgeschlossen (84120 ms noch verfuegbar) |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=2000 NormP=2000 mW -> SumNormP=2000 mW |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=71 mul=15 div=1 offset=0 NormP=1500 mW -> SumNormP=3500 mW |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=3500 mW |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=1000 NormP=1000 mW -> SumNormP=4500 mW |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=200 div=78 offset=150 NormP=406 mW -> SumNormP=4906 mW |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=100 act_rate=0 mul=141 div=10 offset=100 NormP=1510 mW -> SumNormP=6416 mW |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=0 mul=55 div=10 offset=0 NormP=2750 mW -> SumNormP=9166 mW |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=0 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=10106 mW |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_lte: norm_power_rate=3400 act_rate=0 mul=1 div=1 offset=0 NormP=3400 mW -> SumNormP=13506 mW |
| | [ 45.360000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=9 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=14023 mW |
| | [ 45.360000] SysRq : Changing Loglevel |
| | [ 45.360000] Loglevel set to 4 |
| | [ 45.460000] ---> reanimated debugbuffer: read=0 write=16362, written=16362 <--- |
| | [ 45.840000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8e96) |
| | [ 45.840000] {micron_read_hwecc} page 0x8e96 Sec 0 1 Berr 0 OOB 0 ECC |
| | [ 46.980000] Info: ltqhcd_hc_start() line 2257: ZLP write without short_rw set! xfer_count:0/0 |
| | [ 47.100000] LTQUSB: LTQUSB DEV 2 EP 83 HC 1 HALT |
| | [ 47.100000] LTQUSB: LTQUSB HC HALT 2 hcchar = 0x80989a00, hcint = 0x10, hcintmsk = 0x2, hctsiz = 0x40080200 |
| | [ 47.100000] LTQUSB: LTQUSB HC HALT 5 hcchar = 0xc0989a00, hcint = 0x0, hcintmsk = 0x2, hctsiz = 0x40080200 |
| | [ 47.100000] LTQUSB: LTQUSB HC HALT 5 after 0 iterations hcchar = 0x989a00, hcint = 0x2, hcintmsk = 0x2, hctsiz = 0x40080200 |
| | [ 47.100000] LTQUSB: LTQUSB DEV 2 EP 83 HC 1 Complete dequeueing urb 836da5c0, urbd 86ff0b40 |
| | [ 47.100000] LTQUSB: LTQUSB need_comp = 1 complete_inuse = 0 |
| | [ 47.100000] LTQUSB: ltqhcd_disconnect(81384198) |
| | [ 47.100000] LTQUSB: LTQUSB DEV 2 EP 82 HC 0 HALT |
| | [ 47.100000] LTQUSB: LTQUSB HC HALT 1 |
| | [ 47.100000] ue_altair 2-1:1.0: rx shutdown, code -143 |
| | [ 47.100000] LTQUSB: ltqhcd_urb_enqueue(): port not connected |
| | [ 47.100000] ue_altair 2-1:1.0: rx_submit: usb_submit_urb failed, device gone |
| | [ 47.100000] ue_altair 2-1:1.0: rx shutdown, code -143 |
| | [ 47.100000] LTQUSB: ltqhcd_urb_enqueue(): port not connected |
| | [ 47.100000] ue_altair 2-1:1.0: rx_submit: usb_submit_urb failed, device gone |
| | [ 47.100000] ue_altair 2-1:1.0: rx shutdown, code -143 |
| | [ 47.100000] LTQUSB: ltqhcd_urb_enqueue(): port not connected |
| | [ 47.100000] ue_altair 2-1:1.0: rx_submit: usb_submit_urb failed, device gone |
| | [ 47.100000] usb 2-1: USB disconnect, device number 2 |
| | [ 47.100000] Bus#2 disconnect: AVM Powermeter changed to 0 mA |
| | [ 47.100000] ALT3100_03_00_00_00_35_3B Loading Modules ended SUCCESSFULLY Status: OK |
| | [ 47.190000] LTE_UDEV_TTY_REM: Signal token missing, do nothing |
| | [ 47.650000] system-load 7 loadavg 1.77 0.43 0.14 - 95 tasks:7 % curr:ar7cfgctl(1 %) max:ar7cfgctl(1 %, pid:2732) pgstat: sum=28659 free=4385 slab=6030 alloc=476/s fault=851/s (sleep 0) |
| | [ 47.710000] usb 2-1: new high-speed USB device number 3 using lantiq,ltqusb |
| | [ 47.960000] usb 2-1: New USB device found, idVendor=216f, idProduct=0041 |
| | [ 47.960000] usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 |
| | [ 47.960000] usb 2-1: Product: Altair USB Product |
| | [ 47.960000] usb 2-1: Manufacturer: Altair |
| | [ 47.960000] usb 2-1: SerialNumber: F320AF3405497 |
| | [ 47.960000] Bus#2 connect: AVM Powermeter changed to 100 mA |
| | [ 47.960000] Spontaneous reconnect |
| | [ 47.970000] Bus#2 config: AVM Powermeter changed to 100 mA |
| | [ 48.120000] Send concat format change command: 4 chars, control msg returned 4 |
| | [ 48.140000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8661) |
| | [ 48.140000] {micron_read_hwecc} page 0x8661 Sec 2 0 Berr 0 OOB 1 ECC |
| | [ 48.170000] LTE_UDEV_TTY_ADD: LTE using /dev/ttyLTE0 as AT channel |
| | [ 48.420000] LTQUSB: LTQUSB DEV 3 EP 83 HC 1 HALT |
| | [ 48.420000] LTQUSB: LTQUSB HC HALT 2 hcchar = 0x80d89a00, hcint = 0x10, hcintmsk = 0x2, hctsiz = 0x40080200 |
| | [ 48.420000] LTQUSB: LTQUSB HC HALT 5 hcchar = 0xc0d89a00, hcint = 0x10, hcintmsk = 0x2, hctsiz = 0x40080200 |
| | [ 48.420000] LTQUSB: LTQUSB HC HALT 5 after 0 iterations hcchar = 0xd89a00, hcint = 0x12, hcintmsk = 0x2, hctsiz = 0x40080200 |
| | [ 48.420000] LTQUSB: LTQUSB DEV 3 EP 83 HC 1 Complete dequeueing urb 8363f140, urbd 837bd900 |
| | [ 48.420000] LTQUSB: LTQUSB need_comp = 1 complete_inuse = 0 |
| | [ 48.480000] LTE_UDEV_UESERVICE_ADD: Found Altair firmware, sending hw_add |
| | [ 49.050000] IPv6: ADDRCONF(NETDEV_UP): lte0: link is not ready |
| | [ 49.090000] IPv6: ADDRCONF(NETDEV_UP): lte1: link is not ready |
| | [ 49.110000] IPv6: ADDRCONF(NETDEV_UP): lte2: link is not ready |
| | [ 55.170000] system-load 100% loadavg 1.70 0.44 0.15 - 89 tasks:76 % curr:wland(34 %) max:wland(34 %, pid:2369) pgstat: sum=28853 free=3661 slab=6072 alloc=852/s fault=1304/s (sleep 7) |
| | [ 58.060000] GreenAP on wifi0: Transition to Power save (WAIT) |
| | [ 58.090000] 8021q: adding VLAN 0 to HW filter on device ath0 |
| | [ 238.560000] GreenAP on wifi0: Transition to power save On |
| | [ 3451.880000] system-load 100% loadavg 0.0 0.1 0.5 - 83 tasks:0 % curr:find(0 %) max:wland(0 %, pid:2369) pgstat: sum=28523 free=3294 slab=5838 alloc=15/s fault=0/s (sleep 6) |
| | |
| | </nowiki> |
| | </WRAP>\\ |
| |