Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision | ||
| toh:avm:fritz.box.5490 [2021/09/15 20:31] – [Supported Versions] linuxinside | toh:avm:fritz.box.5490 [2021/09/25 08:10] – [Info] linuxinside | ||
|---|---|---|---|
| Line 7: | Line 7: | ||
| ===== Supported Versions ===== | ===== Supported Versions ===== | ||
| - | :!: <color # | + | :!: <color # |
| ---- datatable ---- | ---- datatable ---- | ||
| Line 19: | Line 19: | ||
| ===== Experimental Versions ===== | ===== Experimental Versions ===== | ||
| - | [[https:// | + | * Clone this [[https:// |
| + | |||
| + | git clone -b for_fritzbox7490 https:// | ||
| + | |||
| + | * Follow the build instructions see here [[https:// | ||
| + | |||
| + | First try if you can get an initramfs-image to run on your device this will keep the original software intact. | ||
| + | The use of a 3.3v serial cable (for example [[https:// | ||
| + | |||
| + | === For advanced users, once the initramfs image is working: === | ||
| + | |||
| + | * Backup your contents of the NAND and SPI flash partitions. | ||
| + | * Flash the kernel at the " | ||
| + | |||
| + | mtd erase kernel | ||
| + | mtd write / | ||
| + | ubiformat /dev/mtd5 -f / | ||
| ===== Hardware Highlights ===== | ===== Hardware Highlights ===== | ||
| Line 46: | Line 62: | ||
| **Overview** | **Overview** | ||
| - | FIXME | + | < |
| + | Mem- Type | ||
| + | ----------- | ||
| + | nand0 | ||
| + | nand0 | ||
| + | nand0 | ||
| + | nand0 | ||
| + | nand0 | ||
| + | nand0 | ||
| + | spi0 6 | ||
| + | spi0 7 | ||
| + | spi0 8 | ||
| + | </ | ||
| Line 64: | Line 92: | ||
| ^ [[docs: | ^ [[docs: | ||
| ^ Flash size | 8192 KiB + 524288 KiB / 512MiB | ^ Flash size | 8192 KiB + 524288 KiB / 512MiB | ||
| - | ^ Flash Chip | FIXME | + | ^ Flash Chip | //distinct Chip//: |
| ^ RAM size | 512 MiB | | ^ RAM size | 512 MiB | | ||
| ^ RAM Chip | 2x FIXME | | ^ RAM Chip | 2x FIXME | | ||
| Line 132: | Line 160: | ||
| ===== BootLogs ===== | ===== BootLogs ===== | ||
| + | ==== OEM bootlog ==== | ||
| + | <WRAP bootlog> | ||
| + | < | ||
| + | ROM VER: 1.1.4 | ||
| + | CFG 05 | ||
| + | DC! DC[\] | ||
| + | (AVM) EVA Revision: 1.2650 | ||
| + | (C) Copyright 2005 AVM Date: Aug 14 2015 Time: 17:25:59 (0) 3 0x0-0x740D | ||
| + | |||
| + | [FLASH:] WINBOND Uniform-Flash 1MB 256 Bytes WriteBuffer | ||
| + | [FLASH: | ||
| + | [NAND:] 512MB TOSHIBA 4096 Pagesize 256k Blocksize 2048 Blocks | ||
| + | [SYSTEM:] VR9 on 500MHz/ | ||
| + | .Initializing external Switch | ||
| + | |||
| + | Eva_AVM >go | ||
| + | ## | ||
| + | |||
| + | Lantiq xDSL CPE VR9 | ||
| + | phym = 10000000, mem = 10000000, max_pfn = 00010000 | ||
| + | Reserving memory for CP1 @0xb0000000, | ||
| + | plat_device_tree_setup: | ||
| + | plat_device_tree_setup: | ||
| + | DT: d0 0d fe ed 00 00 15 06 | ||
| + | [ 0.000000] Linux version 3.10.73 (jwetter@EmbeddedVM) (gcc version 4.8.3 (Buildroot 2014.08) ) #1 SMP Tue Jan 26 17:55:05 CET 2016 | ||
| + | [ 0.000000] [env_init] 0x81019ab0[0] | ||
| + | [ 0.000000] [env_init] 0x81019af0[1] | ||
| + | [ 0.000000] [env_init] 0x81019bf0[2] | ||
| + | [ 0.000000] [env_init] switch to ram location | ||
| + | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config (ptr 80825000) | ||
| + | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: module memory entry | ||
| + | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: version info entry | ||
| + | [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: device-tree for subrev 0 found | ||
| + | [ 0.000000] bootconsole [early0] enabled | ||
| + | [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc) | ||
| + | [ 0.000000] Determined physical RAM map: | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Initrd not found or empty - disabling initrd | ||
| + | [ 0.000000] [module-alloc] use 0x99b000 bytes at 0x81205000 | ||
| + | [ 0.000000] PERCPU: Embedded 7 pages/cpu @81ba4000 s7072 r8192 d13408 u32768 | ||
| + | [ 0.000000] Kernel command line: console=ttyS0, | ||
| + | [ 0.000000] [NAND] nand_size = 0x20000000 | ||
| + | [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | ||
| + | [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | ||
| + | [ 0.000000] Writing ErrCtl register=0003d107 | ||
| + | [ 0.000000] Readback ErrCtl register=0003d107 | ||
| + | [ 0.000000] Memory: 240724k/ | ||
| + | [ 0.000000] Hierarchical RCU implementation. | ||
| + | [ 0.000000] NR_IRQS:181 | ||
| + | [ 0.000000] SRSConf0 0x3feffbfe: SRS1: 0xffffffff, SRS2 0xffffffff, SRS3 0xffffffff | ||
| + | [ 0.000000] Lantiq ICU driver, version 3.0.1, (c) 2001-2011 Lantiq Deutschland GmbH | ||
| + | [ 0.000000] Console: colour dummy device 80x25 | ||
| + | [ 0.000000] console [ttyS0] enabled, bootconsole disabled | ||
| + | [ 0.000000] console [ttyS0] enabled, bootconsole disabled | ||
| + | [ 0.020000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880) | ||
| + | [ 0.080000] pid_max: default: 32768 minimum: 301 | ||
| + | [ 0.080000] Security Framework initialized | ||
| + | [ 0.080000] Mount-cache hash table entries: 512 | ||
| + | [ 0.090000] CPU1 revision is: 00019556 (MIPS 34Kc) | ||
| + | [ 0.170000] Brought up 2 CPUs | ||
| + | [ 0.170000] [yield_context_init] cpu=1 tc=2 mask=300 | ||
| + | [ 0.180000] [yield_context_init] cpu=0 tc=3 mask=410 | ||
| + | [ 0.180000] devtmpfs: initialized | ||
| + | [ 0.200000] pinctrl core: initialized pinctrl subsystem | ||
| + | [ 0.200000] Creating Config Table | ||
| + | [ 0.200000] [avm_generate_hw_config_table_from_device_tree] gpio_cnt: 48 | ||
| + | [ 0.210000] NET: Registered protocol family 16 | ||
| + | [ 0.220000] Reboot Status is: Power-On | ||
| + | [ 0.220000] [TFFS3_Early_Init] called | ||
| + | [ 0.230000] [avmnet] [avmnet_cfg_init] Driver version: 6.221.1.2 | ||
| + | [ 1.040000] Lantiq PCIe Root Complex driver, version 2.0.0, (c) 2001-2011 Lantiq Deutschland GmbH | ||
| + | [ 1.090000] bio: create slab < | ||
| + | [ 1.090000] PCI host bridge to bus 0000:00 | ||
| + | [ 1.100000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff] | ||
| + | [ 1.100000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff] | ||
| + | [ 1.110000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] | ||
| + | [ 1.120000] ifx_pcie_rc_class_early_fixup port 0: fixed pcie host bridge to pci-pci bridge | ||
| + | [ 1.130000] pci 0000: | ||
| + | [ 1.130000] pci 0000: | ||
| + | [ 1.140000] pci 0000: | ||
| + | [ 1.150000] pci 0000: | ||
| + | [ 1.160000] NET: Registered protocol family 8 | ||
| + | [ 1.160000] NET: Registered protocol family 20 | ||
| + | [ 1.160000] Switching to clocksource MIPS | ||
| + | [ 1.230000] NET: Registered protocol family 2 | ||
| + | [ 1.230000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) | ||
| + | [ 1.240000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) | ||
| + | [ 1.240000] TCP: Hash tables configured (established 2048 bind 2048) | ||
| + | [ 1.250000] TCP: reno registered | ||
| + | [ 1.250000] UDP hash table entries: 256 (order: 1, 8192 bytes) | ||
| + | [ 1.260000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | ||
| + | [ 1.270000] NET: Registered protocol family 1 | ||
| + | [ 1.280000] pci 0000: | ||
| + | [ 1.280000] Lantiq CGU driver, version 1.1.32, (c) 2001-2011 Lantiq Deutschland GmbH | ||
| + | [ 1.290000] IFX DMA driver, version ifxmips_dma_core.c: | ||
| + | [ 1.290000] | ||
| + | [ 1.310000] squashfs: version 4.0 (2009/ | ||
| + | [ 1.310000] fuse init (API version 7.22) | ||
| + | [ 1.320000] msgmni has been set to 470 | ||
| + | [ 1.320000] io scheduler noop registered (default) | ||
| + | [ 1.670000] ttyS0 at MMIO 0x1e100c00 (irq = 107) is a PORT_IFX_ASC | ||
| + | [ 1.670000] ifx_usif_uart_init: | ||
| + | [ 1.680000] avm_net_trace: | ||
| + | [ 1.680000] [loadcontrol] set auto - scale=1 | ||
| + | [ 1.690000] Lantiq Thermal Sensor driver, version 1.0.3, (c) 2001-2011 Lantiq Deutschland GmbH | ||
| + | [ 1.700000] ifx_pmu_init: | ||
| + | [ 1.700000] Lantiq PMU driver, version 1.2.6, (c) 2001-2011 Lantiq Deutschland GmbH | ||
| + | [ 1.710000] Lantiq GPIO driver, version 1.3.2, (c) 2001-2011 Lantiq Deutschland GmbH | ||
| + | [ 1.720000] Infineon Technologies RCU driver version 1.0.7 | ||
| + | [ 1.740000] loop: module loaded | ||
| + | [ 1.740000] nbd: registered device at major 43 | ||
| + | [ 1.770000] [HSNAND] Toshiba-BENAND | ||
| + | [ 1.770000] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 4096, OOB size: 128 | ||
| + | [ 1.790000] Scanning device for bad blocks | ||
| + | [ 1.990000] {tsh_read_ecc} status 0xe1 | ||
| + | [ 1.990000] [ifx_hsnand_command] read block failed (column: 0x1000 page: 0x18000) | ||
| + | [ 2.000000] Bad eraseblock 1536 at 0x000018000000 | ||
| + | [ 2.000000] {tsh_read_ecc} status 0xe1 | ||
| + | [ 2.000000] [ifx_hsnand_command] read block failed (column: 0x1000 page: 0x18040) | ||
| + | [ 2.010000] Bad eraseblock 1537 at 0x000018040000 | ||
| + | [ 2.070000] {tsh_read_ecc} status 0xe1 | ||
| + | [ 2.070000] [ifx_hsnand_command] read block failed (column: 0x1000 page: 0x1dd80) | ||
| + | [ 2.080000] Bad eraseblock 1910 at 0x00001dd80000 | ||
| + | [ 2.080000] {tsh_read_ecc} status 0xe1 | ||
| + | [ 2.090000] [ifx_hsnand_command] read block failed (column: 0x1000 page: 0x1de00) | ||
| + | [ 2.090000] Bad eraseblock 1912 at 0x00001de00000 | ||
| + | [ 2.120000] badblock statistics: | ||
| + | [ 2.120000] -------------------- | ||
| + | [ 2.120000] | ||
| + | [ 2.120000] | ||
| + | [ 2.120000] | ||
| + | [ 2.130000] | ||
| + | [ 2.130000] | ||
| + | [ 2.130000] | ||
| + | [ 2.130000] | ||
| + | [ 2.150000] | ||
| + | [ 2.160000] | ||
| + | [ 2.160000] | ||
| + | [ 2.170000] | ||
| + | [ 2.170000] | ||
| + | [ 2.180000] Creating 6 MTD partitions on " | ||
| + | [ 2.180000] 0x000000000000-0x000000400000 : " | ||
| + | [ 2.190000] 0x000000400000-0x000003400000 : " | ||
| + | [ 2.200000] 0x000003400000-0x000003800000 : " | ||
| + | [ 2.200000] 0x000003800000-0x000006800000 : " | ||
| + | [ 2.210000] 0x000006800000-0x000006a00000 : " | ||
| + | [ 2.220000] 0x000006a00000-0x000020000000 : " | ||
| + | [ 2.230000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_hsnand | ||
| + | [ 2.230000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_sflash | ||
| + | [ 2.240000] Creating 3 MTD partitions on " | ||
| + | [ 2.250000] 0x000000000000-0x000000040000 : " | ||
| + | [ 2.250000] 0x000000040000-0x0000000a0000 : "tffs (1)" | ||
| + | [ 2.260000] 0x0000000a0000-0x000000100000 : "tffs (2)" | ||
| + | [ 2.270000] Lantiq SPI flash driver, version 2.0.1, (c) 2001-2011 Lantiq Deutschland GmbH | ||
| + | [ 2.280000] tun: Universal TUN/TAP device driver, 1.6 | ||
| + | [ 2.280000] tun: (C) 1999-2004 Max Krasnyansky < | ||
| + | [ 2.290000] SWAPI: Registered character device [switch_api] with major no [81] | ||
| + | [ 2.290000] i2c /dev entries driver | ||
| + | [ 2.300000] cpuidle: using governor ladder | ||
| + | [ 2.300000] cpuidle: using governor menu | ||
| + | [ 2.310000] AVM PA 4.3.14 2015-10-21 | ||
| + | [ 2.310000] AVM PA skb pktinfo at offset 136 size 196 | ||
| + | [ 2.310000] [loadcontrol]module avm_pa registered | ||
| + | [ 2.320000] ipip: IPv4 over IPv4 tunneling driver | ||
| + | [ 2.330000] TCP: cubic registered | ||
| + | [ 2.330000] NET: Registered protocol family 10 | ||
| + | [ 2.330000] sit: IPv6 over IPv4 tunneling driver | ||
| + | [ 2.340000] NET: Registered protocol family 17 | ||
| + | [ 2.340000] l2tp_core: L2TP core driver, V2.0 | ||
| + | [ 2.350000] l2tp_ip: L2TP IP encapsulation support (L2TPv3) | ||
| + | [ 2.350000] l2tp_netlink: | ||
| + | [ 2.360000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) | ||
| + | [ 2.360000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) | ||
| + | [ 2.370000] 8021q: 802.1Q VLAN Support v1.8 | ||
| + | [ 2.370000] Key type dns_resolver registered | ||
| + | [ 2.380000] < | ||
| + | [ 2.380000] [TFFS3_Init] No storage module registered, trying legacy fallback | ||
| + | [ 2.390000] [TFFS3_Register_LGCY] Called | ||
| + | [ 2.390000] [TFFS3_LGCY_Configure] Called | ||
| + | [ 2.400000] [TFFS3_LGCY_Setup] using mtd7(tffs (1)), mtd8(tffs (2)) | ||
| + | [ 2.400000] [TFFS3_LGCY_Setup] mtd "tffs (1)": segment value 1 | ||
| + | [ 2.410000] [TFFS3_LGCY_Setup] mtd "tffs (2)": segment value 1 | ||
| + | [ 2.410000] [TFFS3_LGCY_Setup] Using segment 1 (avail: 1 + 1) | ||
| + | [ 2.420000] [TFFS3_LGCY_Setup] mtd8 size=0x60000 | ||
| + | [ 2.430000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0) | ||
| + | [ 2.430000] [rescan_segment] Called with mode=2 | ||
| + | [ 2.430000] TFFS: Clearing index for update | ||
| + | [ 2.440000] Adam2 environment variables API installed. | ||
| + | [ 2.450000] [simple-profiling]: | ||
| + | [ 2.450000] Enable Performance Counter 0 for Data cache load/stores (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable) | ||
| + | [ 2.470000] Setup tcs=0x1 current_tc_mask=0x1, | ||
| + | [ 2.470000] [simple-profiling]: | ||
| + | [ 2.480000] Enable Performance Counter 1 for Data cache load/store misses (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable) | ||
| + | [ 2.490000] Setup tcs=0x1 current_tc_mask=0x1, | ||
| + | [ 2.500000] {avmnet_cfg_netinit} | ||
| + | [ 2.500000] [avmnet] No config found for HWRev 223, HWSubRev 1, Profile-ID 0, trying base config for HWSubRev | ||
| + | [ 2.510000] [avmnet] No config found for HWRev 223, HWSubRev 1, trying base config for HWRev | ||
| + | [ 2.520000] [avmnet] [avmnet_swi_7port_init] Init on module swi_vr9 called. | ||
| + | [ 2.940000] [ppe_eth_init] init_hw() | ||
| + | [ 2.940000] [init_hw] ppe_hw_init=0xff successful | ||
| + | [ 2.940000] [ppe_eth_init] ifx_proc_file_create() | ||
| + | [ 2.950000] [ppe_eth_init] dma_setup_init() | ||
| + | [ 2.950000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48 | ||
| + | [ 2.960000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48 | ||
| + | [ 3.720000] [avmnet] [avmnet_ar8334_vlan_setup] | ||
| + | [ 6.620000] [avmnet_set_macaddr] Setup Mac Addr for Device(wan): | ||
| + | [ 6.630000] avmnet: avm_pa: register pid wan | ||
| + | [ 6.640000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth0): | ||
| + | [ 6.650000] avmnet: avm_pa: register pid eth0 | ||
| + | [ 6.650000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth1): | ||
| + | [ 6.660000] avmnet: avm_pa: register pid eth1 | ||
| + | [ 6.660000] [avmnet] [ifx_ppa_setup_priv] VlanID no realdev eth2.2 | ||
| + | [ 6.670000] avmnet: avm_pa: register pid eth2.2 | ||
| + | [ 6.670000] [avmnet] [ifx_ppa_setup_priv] VlanID no realdev eth3.3 | ||
| + | [ 6.680000] avmnet: avm_pa: register pid eth3.3 | ||
| + | [ 6.680000] [avmnet_set_macaddr] Setup Mac Addr for Device(wasp): | ||
| + | [ 6.690000] [avmnet_create_netdevice] setup offload_cpu_link on device wasp | ||
| + | [ 6.700000] avmnet: avm_pa: register pid wasp | ||
| + | [ 6.700000] [avmnet_set_macaddr] Setup Mac Addr for Device(switch): | ||
| + | [ 6.710000] avmnet: avm_pa: register pid switch | ||
| + | [ 6.750000] SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock1 | ||
| + | [ 6.750000] yaffs: dev is 32505857 name is " | ||
| + | [ 6.760000] yaffs: passed flags "" | ||
| + | [ 6.780000] VFS: Mounted root (yaffs filesystem) readonly on device 31:1. | ||
| + | [ 6.790000] devtmpfs: mounted | ||
| + | [ 6.790000] Freeing unused kernel memory: 300K (80835000 - 80880000) | ||
| + | [ 7.840000] TFFS Name Table L | ||
| + | [ 9.070000] [avm_urlader_env_set_variable] opening ID 0x1ae for writing | ||
| + | [ 9.190000] led_modul_Fritz_Box_HW223: | ||
| + | [ 9.190000] (C) Copyright 2012 by AVM | ||
| + | [ 9.190000] ' taints kernel. | ||
| + | [ 9.200000] Disabling lock debugging due to kernel taint | ||
| + | [ 9.200000] [module-alloc-by-name] give 0x1b000 bytes at 0x81205000 to module ' | ||
| + | [ 9.230000] [LED] use GPIO 45 for ' | ||
| + | [ 9.230000] [LED] use GPIO 47 for ' | ||
| + | [ 9.240000] [LED] use GPIO 36 for ' | ||
| + | [ 9.240000] [LED] use GPIO 35 for ' | ||
| + | [ 9.250000] [LED] use GPIO 33 for ' | ||
| + | [ 9.250000] [LED] use GPIO 46 for ' | ||
| + | [ 9.260000] [BUTTON] use GPIO 29 for ' | ||
| + | [ 9.260000] [BUTTON] use GPIO 1 for ' | ||
| + | [ 9.280000] AVM_WATCHDOG: | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | </ | ||
| + | </ | ||
| + | |||
| + | ==== OpenWrt bootlog ==== | ||
| + | <WRAP bootlog> | ||
| + | < | ||
| + | ROM VER: 1.1.4 | ||
| + | CFG 05 | ||
| + | |||
| + | (AVM) EVA Revision: 1.2650 | ||
| + | (C) Copyright 2005 AVM Date: Aug 14 2015 Time: 17:25:59 (0) 3 0x0-0x740D | ||
| + | |||
| + | [FLASH:] WINBOND Uniform-Flash 1MB 256 Bytes WriteBuffer | ||
| + | [FLASH: | ||
| + | [NAND:] 512MB TOSHIBA 4096 Pagesize 256k Blocksize 2048 Blocks | ||
| + | [SYSTEM:] VR9 on 500MHz/ | ||
| + | .Initializing external Switch | ||
| + | |||
| + | Eva_AVM >## | ||
| + | [ 0.000000] Linux version 5.10.64 (linuxinside@pluto) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 10.3.0 r17573-14e2b33771) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #0 SMP Wed Sep 15 18:36:45 2021 | ||
| + | [ 0.000000] SoC: xRX200 rev 1.2 | ||
| + | [ 0.000000] printk: bootconsole [early0] enabled | ||
| + | [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc) | ||
| + | [ 0.000000] MIPS: machine is AVM FRITZ!Box 5490 | ||
| + | [ 0.000000] Initrd not found or empty - disabling initrd | ||
| + | [ 0.000000] Detected 1 available secondary CPU(s) | ||
| + | [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | ||
| + | [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | ||
| + | [ 0.000000] Zone ranges: | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Movable zone start for each node | ||
| + | [ 0.000000] Early memory node ranges | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] | ||
| + | [ 0.000000] percpu: Embedded 14 pages/cpu s26448 r8192 d22704 u57344 | ||
| + | [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 | ||
| + | [ 0.000000] Kernel command line: console=ttyLTQ0, | ||
| + | [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) | ||
| + | [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) | ||
| + | [ 0.000000] Writing ErrCtl register=0003d104 | ||
| + | [ 0.000000] Readback ErrCtl register=0003d104 | ||
| + | [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | ||
| + | [ 0.000000] Memory: 249008K/ | ||
| + | [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, | ||
| + | [ 0.000000] rcu: Hierarchical RCU implementation. | ||
| + | [ 0.000000] Tracing variant of Tasks RCU enabled. | ||
| + | [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | ||
| + | [ 0.000000] NR_IRQS: 256 | ||
| + | [ 0.000000] random: get_random_bytes called from start_kernel+0x3d4/ | ||
| + | [ 0.000000] CPU Clock: 500MHz | ||
| + | [ 0.000000] clocksource: | ||
| + | [ 0.000012] sched_clock: | ||
| + | [ 0.007914] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880) | ||
| + | [ 0.074000] pid_max: default: 32768 minimum: 301 | ||
| + | [ 0.078933] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | ||
| + | [ 0.086127] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | ||
| + | [ 0.097853] rcu: Hierarchical SRCU implementation. | ||
| + | [ 0.103008] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build | ||
| + | [ 0.111044] smp: Bringing up secondary CPUs ... | ||
| + | [ 0.116696] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | ||
| + | [ 0.116713] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | ||
| + | [ 0.116813] CPU1 revision is: 00019556 (MIPS 34Kc) | ||
| + | [ 0.170838] Synchronize counters for CPU 1: done. | ||
| + | [ 0.195166] smp: Brought up 1 node, 2 CPUs | ||
| + | [ 0.206404] clocksource: | ||
| + | [ 0.216185] futex hash table entries: 512 (order: 2, 16384 bytes, linear) | ||
| + | [ 0.223127] pinctrl core: initialized pinctrl subsystem | ||
| + | [ 0.229621] NET: Registered protocol family 16 | ||
| + | [ 0.273061] dcdc-xrx200 1f106a00.dcdc: | ||
| + | [ 0.280453] gpio-484 (pcie-rst-dev): | ||
| + | [ 0.285827] gpio-476 (usb-vbus): hogged as output/high | ||
| + | [ 0.291113] gpio-467 (wasp-wakeup): | ||
| + | [ 0.296933] pinctrl-xway 1e100b10.pinmux: | ||
| + | [ 0.302181] dma-xway 1e104100.dma: | ||
| + | [ 0.310528] PCI host bridge / | ||
| + | [ 0.316304] | ||
| + | [ 0.321504] | ||
| + | [ 0.394087] random: fast init done | ||
| + | [ 0.401920] usbcore: registered new interface driver usbfs | ||
| + | [ 0.407529] usbcore: registered new interface driver hub | ||
| + | [ 0.413001] usbcore: registered new device driver usb | ||
| + | [ 0.421207] PCI host bridge to bus 0000:00 | ||
| + | [ 0.425273] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff] | ||
| + | [ 0.432174] pci_bus 0000:00: root bus resource [io 0x1ae00000-0x1affffff] | ||
| + | [ 0.439137] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] | ||
| + | [ 0.445971] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] | ||
| + | [ 0.459951] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 | ||
| + | [ 0.467356] clocksource: | ||
| + | [ 0.475443] NET: Registered protocol family 2 | ||
| + | [ 0.480193] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) | ||
| + | [ 0.489332] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) | ||
| + | [ 0.497690] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) | ||
| + | [ 0.505394] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) | ||
| + | [ 0.512728] TCP: Hash tables configured (established 2048 bind 2048) | ||
| + | [ 0.519292] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) | ||
| + | [ 0.525731] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) | ||
| + | [ 0.533458] NET: Registered protocol family 1 | ||
| + | [ 0.537831] PCI: CLS 0 bytes, default 32 | ||
| + | [ 0.543228] gptu: totally 6 16-bit timers/ | ||
| + | [ 0.548283] gptu: misc_register on minor 63 | ||
| + | [ 0.552474] gptu: succeeded to request irq 126 | ||
| + | [ 0.556901] gptu: succeeded to request irq 127 | ||
| + | [ 0.561479] gptu: succeeded to request irq 128 | ||
| + | [ 0.565907] gptu: succeeded to request irq 129 | ||
| + | [ 0.570518] gptu: succeeded to request irq 130 | ||
| + | [ 0.574957] gptu: succeeded to request irq 131 | ||
| + | [ 0.579691] No VPEs reserved for AP/SP, not initialize VPE loader | ||
| + | [ 0.579691] Pass maxvpes=< | ||
| + | [ 0.591091] No TCs reserved for AP/SP, not initializing RTLX. | ||
| + | [ 0.591091] Pass maxtcs=< | ||
| + | [ 0.604745] workingset: timestamp_bits=14 max_order=16 bucket_order=2 | ||
| + | [ 0.619651] squashfs: version 4.0 (2009/ | ||
| + | [ 0.625329] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | ||
| + | [ 0.640643] gpio-export gpio-export: | ||
| + | [ 0.648679] 1e100c00.serial: | ||
| + | [ 0.657645] printk: console [ttyLTQ0] enabled | ||
| + | [ 0.657645] printk: console [ttyLTQ0] enabled | ||
| + | [ 0.666332] printk: bootconsole [early0] disabled | ||
| + | [ 0.666332] printk: bootconsole [early0] disabled | ||
| + | [ 0.680097] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xdc | ||
| + | [ 0.685019] nand: Toshiba NAND 512MiB 3,3V 8-bit | ||
| + | [ 0.689648] nand: 512 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 128 | ||
| + | [ 0.697411] Scanning device for bad blocks | ||
| + | [ 0.949399] Bad eraseblock 1536 at 0x000018000000 | ||
| + | [ 0.952744] Bad eraseblock 1537 at 0x000018040000 | ||
| + | [ 1.017236] Bad eraseblock 1910 at 0x00001dd80000 | ||
| + | [ 1.020821] Bad eraseblock 1912 at 0x00001de00000 | ||
| + | [ 1.047053] 6 fixed-partitions partitions found on MTD device 14000000.flash | ||
| + | [ 1.052709] Creating 6 MTD partitions on " | ||
| + | [ 1.058189] 0x000000000000-0x000000400000 : " | ||
| + | [ 1.064532] 0x000000400000-0x000003400000 : " | ||
| + | [ 1.070444] 0x000003400000-0x000003800000 : " | ||
| + | [ 1.076374] 0x000003800000-0x000006800000 : " | ||
| + | [ 1.084869] 0x000006800000-0x000006a00000 : " | ||
| + | [ 1.090471] 0x000006a00000-0x000020000000 : " | ||
| + | [ 1.109936] spi-lantiq-ssc 1e100800.spi: | ||
| + | [ 1.121252] spi-nor spi0.4: s25fl008k (1024 Kbytes) | ||
| + | [ 1.124753] 3 fixed-partitions partitions found on MTD device spi0.4 | ||
| + | [ 1.131135] Creating 3 MTD partitions on " | ||
| + | [ 1.135830] 0x000000000000-0x000000040000 : " | ||
| + | [ 1.142417] 0x000000040000-0x0000000a0000 : "tffs (1)" | ||
| + | [ 1.147903] 0x0000000a0000-0x000000100000 : "tffs (2)" | ||
| + | [ 1.160131] libphy: Fixed MDIO Bus: probed | ||
| + | [ 1.498856] libphy: lantiq, | ||
| + | [ 1.512530] gswip 1e108000.switch: | ||
| + | [ 1.523661] membase: ae10b100 | ||
| + | [ 1.536536] NET: Registered protocol family 10 | ||
| + | [ 1.552096] Segment Routing with IPv6 | ||
| + | [ 1.554449] NET: Registered protocol family 17 | ||
| + | [ 1.559022] bridge: filtering via arp/ | ||
| + | [ 1.572511] 8021q: 802.1Q VLAN Support v1.8 | ||
| + | [ 1.581716] pcie-xrx200 1d900000.pcie: | ||
| + | [ 1.908587] libphy: lantiq, | ||
| + | [ 1.957739] DSA: tree 0 has no CPU port | ||
| + | [ 1.960178] qca8k: probe of 1e108000.switch-mii: | ||
| + | [ 2.058311] gswip 1e108000.switch fiber (uninitialized): | ||
| + | [ 2.076906] gswip 1e108000.switch lan2 (uninitialized): | ||
| + | [ 2.093587] gswip 1e108000.switch lan1 (uninitialized): | ||
| + | [ 2.110968] DSA: tree 0 setup | ||
| + | [ 2.112555] gswip 1e108000.switch: | ||
| + | [ 2.119787] pcie-xrx200 1d900000.pcie: | ||
| + | [ 2.259288] PCI host bridge / | ||
| + | [ 2.263977] PCI host bridge to bus 0000:01 | ||
| + | [ 2.267884] pci_bus 0000:01: root bus resource [mem 0x1c000000-0x1cffffff] | ||
| + | [ 2.274669] pci_bus 0000:01: root bus resource [io 0x1d800000-0x1d8fffff] | ||
| + | [ 2.281595] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0] | ||
| + | [ 2.288400] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] | ||
| + | [ 2.296296] ifx_pcie_rc_class_early_fixup: | ||
| + | [ 2.313980] pci 0000: | ||
| + | [ 2.320462] pci 0000: | ||
| + | [ 2.326512] pci 0000: | ||
| + | [ 2.335620] pci 0000: | ||
| + | [ 2.342653] pci 0000: | ||
| + | [ 2.348374] pci 0000: | ||
| + | [ 2.355226] pci 0000: | ||
| + | [ 2.360634] pci 0000: | ||
| + | [ 2.379069] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 | ||
| + | [ 2.384258] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 02 | ||
| + | [ 2.390963] pci 0000: | ||
| + | [ 2.397752] pci 0000: | ||
| + | [ 2.404985] pci 0000: | ||
| + | [ 2.410011] pci 0000: | ||
| + | [ 2.416885] ifx_pcie_bios_map_irq port 0 dev 0000: | ||
| + | [ 2.423380] ifx_pcie_bios_map_irq dev 0000: | ||
| + | [ 2.429710] pcieport 0000: | ||
| + | [ 2.436366] pci 0000: | ||
| + | [ 2.446687] pci 0000: | ||
| + | [ 2.453108] pci 0000: | ||
| + | [ 2.461545] UBI: auto-attach mtd5 | ||
| + | [ 2.463768] ubi0: attaching mtd5 | ||
| + | [ 2.706750] ubi0: scanning is finished | ||
| + | [ 2.725935] ubi0: attached mtd5 (name " | ||
| + | [ 2.730069] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes | ||
| + | [ 2.736843] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 1024 | ||
| + | [ 2.743711] ubi0: VID header offset: 1024 (aligned 1024), data offset: 4096 | ||
| + | [ 2.750680] ubi0: good PEBs: 1620, bad PEBs: 4, corrupted PEBs: 0 | ||
| + | [ 2.756687] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 | ||
| + | [ 2.763974] ubi0: max/mean erase counter: 3/2, WL threshold: 4096, image sequence number: 278102684 | ||
| + | [ 2.773042] ubi0: available PEBs: 0, total reserved PEBs: 1620, PEBs reserved for bad PEB handling: 36 | ||
| + | [ 2.782408] ubi0: background thread " | ||
| + | [ 2.795475] UBIFS (ubi0:0): background thread " | ||
| + | [ 2.895976] UBIFS (ubi0:0): recovery needed | ||
| + | [ 3.134333] UBIFS (ubi0:0): recovery completed | ||
| + | [ 3.137605] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name " | ||
| + | [ 3.144743] UBIFS (ubi0:0): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes | ||
| + | [ 3.154734] UBIFS (ubi0:0): FS size: 405135360 bytes (386 MiB, 1570 LEBs), journal size 9420800 bytes (8 MiB, 37 LEBs) | ||
| + | [ 3.165499] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) | ||
| + | [ 3.171274] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID < | ||
| + | [ 3.183022] VFS: Mounted root (ubifs filesystem) on device 0:11. | ||
| + | [ 3.190504] Freeing unused kernel memory: 1276K | ||
| + | [ 3.193583] This architecture does not have kernel memory protection. | ||
| + | [ 3.200107] Run /sbin/init as init process | ||
| + | [ 3.312145] init: Console is alive | ||
| + | [ 3.315556] init: - watchdog - | ||
| + | [ 3.471702] kmodloader: loading kernel modules from / | ||
| + | [ 3.701437] SCSI subsystem initialized | ||
| + | [ 3.758089] ifx_pcie_bios_map_irq port 0 dev 0000: | ||
| + | [ 3.763260] ifx_pcie_bios_map_irq dev 0000: | ||
| + | [ 3.774261] got firmware version: 2026. | ||
| + | [ 4.129896] xhci_hcd 0000: | ||
| + | [ 4.137706] xhci_hcd 0000: | ||
| + | [ 4.150419] xhci_hcd 0000: | ||
| + | [ 4.159463] usb usb1: New USB device found, idVendor=1d6b, | ||
| + | [ 4.166385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| + | [ 4.173702] usb usb1: Product: xHCI Host Controller | ||
| + | [ 4.178557] usb usb1: Manufacturer: | ||
| + | [ 4.183962] usb usb1: SerialNumber: | ||
| + | [ 4.189848] hub 1-0:1.0: USB hub found | ||
| + | [ 4.192563] hub 1-0:1.0: 2 ports detected | ||
| + | [ 4.197542] xhci_hcd 0000: | ||
| + | [ 4.201631] xhci_hcd 0000: | ||
| + | [ 4.209118] xhci_hcd 0000: | ||
| + | [ 4.215513] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | ||
| + | [ 4.224111] usb usb2: New USB device found, idVendor=1d6b, | ||
| + | [ 4.231677] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| + | [ 4.238869] usb usb2: Product: xHCI Host Controller | ||
| + | [ 4.243692] usb usb2: Manufacturer: | ||
| + | [ 4.249244] usb usb2: SerialNumber: | ||
| + | [ 4.254779] hub 2-0:1.0: USB hub found | ||
| + | [ 4.257778] hub 2-0:1.0: 2 ports detected | ||
| + | [ 4.279563] usbcore: registered new interface driver usb-storage | ||
| + | [ 4.284627] kmodloader: done loading kernel modules from / | ||
| + | [ 4.296751] init: - preinit - | ||
| + | [ 4.783107] random: jshn: uninitialized urandom read (4 bytes read) | ||
| + | [ 4.894675] random: jshn: uninitialized urandom read (4 bytes read) | ||
| + | [ 5.407372] random: crng init done | ||
| + | [ 6.748826] gswip 1e108000.switch lan1: configuring for phy/ | ||
| + | [ 6.754969] 8021q: adding VLAN 0 to HW filter on device lan1 | ||
| + | Press the [f] key and hit [enter] to enter failsafe mode | ||
| + | Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | Please press Enter to activate this console. | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | |||
| + | |||
| + | |||
| + | BusyBox v1.34.0 (2021-09-15 18:36:45 UTC) built-in shell (ash) | ||
| + | |||
| + | _______ | ||
| + | | ||
| + | | ||
| + | | ||
| + | |__| W I R E L E S S F R E E D O M | ||
| + | | ||
| + | | ||
| + | | ||
| + | root@OpenWrt:/# | ||
| + | Filesystem | ||
| + | ubi0: | ||
| + | tmpfs | ||
| + | tmpfs 512 | ||
| + | </ | ||
| + | </ | ||
| + | |||
| + | ===== Notes ===== | ||
| + | |||
| + | * OEM source code available at: [[http:// | ||
| + | * Hardwareinfo: | ||
| + | ===== Tags ===== | ||
| + | [[meta: | ||
| + | {{tag> | ||