Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:avm:fritz.box.5490 [2021/09/15 20:18] – created linuxinsidetoh:avm:fritz.box.5490 [2021/09/25 08:10] – [Info] linuxinside
Line 7: Line 7:
 ===== Supported Versions ===== ===== Supported Versions =====
  
- :!: <color #ed1c24>At this moment (September 2021) there is no support: [[http://FIXME|FORUM DISCUSSION]]</color>+ :!: <color #ed1c24>At this moment (September 2021) there is no support: [[https://forum.openwrt.org/t/fritzbox-5490-support/107368|FORUM DISCUSSION]]</color>
  
 ---- datatable ---- ---- datatable ----
Line 17: Line 17:
 ---- ----
  
 +===== Experimental Versions =====
  
 +  * Clone this [[https://github.com/hvegh/openwrt/tree/for_fritzbox7490]] experimental branch, based on the work of many others:
 +
 +  git clone -b for_fritzbox7490 https://github.com/hvegh/openwrt.git 
 +
 +  * Follow the build instructions see here [[https://github.com/hvegh/openwrt/tree/for_fritzbox7490#readme]]
 +
 +First try if you can get an initramfs-image to run on your device this will keep the original software intact.
 +The use of a 3.3v serial cable (for example [[https://www.adafruit.com/product/954]]) is highly recommended, in order to stop Fritz from booting press 'd' on the console.
 +
 +=== For advanced users, once the initramfs image is working: ===
 +
 +  * Backup your contents of the NAND and SPI flash partitions.
 +  * Flash the kernel at the "kernel" partition (mtd1)* and the ubi-rootfs to the "ubi" partition (mtd5)
 +
 +  mtd erase kernel
 +  mtd write /tmp/openwrt-lantiq-xrx200-avm_fritz5490-ubifs-eva-kernel.bin kernel
 +  ubiformat /dev/mtd5 -f /tmp/openwrt-lantiq-xrx200-avm_fritz5490-ubifs-eva-filesystem.bin
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Brand=AVM
 +filter  : Model*~fritz!box 5490
 +----
 +
 +
 +===== Installation =====
 +---- datatable ----
 +cols    : Model, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : l,c,c
 +filter  : Brand=AVM
 +filter  : Model*~fritz!box 5490
 +----
 +
 +→ [[docs:guide-user:installation:generic.flashing|Install OpenWrt]]
 +
 +
 +==== Flash Layout ====
 +**Overview**
 +
 +<code>
 +Mem- Type       MTD     Start           End             Size            Name                    FS
 +-----------     ----    ----------      ----------      ----------      -------------------     ---------------
 +nand0                 0x0000000       0x00400000      0x00400000      kernel
 +nand0                 0x0400000       0x03400000      0x03000000      filesystem              squasfs / yaffs2
 +nand0                 0x3400000       0x03800000      0x00400000      reserved-kernel
 +nand0                 0x3800000       0x06800000      0x03000000      reserved-filesystem
 +nand0                 0x6800000       0x06a00000      0x00200000      config                  yaffs2
 +nand0                 0x6a00000       0x20000000      0x19600000      nand-filesystem         yaffs2
 +spi0            6       0x000000        0x040000        0x40000         urlader
 +spi0            7       0x040000        0x0a0000        0x60000         tffs (1)                tffs3
 +spi0            8       0x0a0000        0x100000        0x60000         tffs (2)                tffs3
 +</code>
 +
 +
 +===== Hardware =====
 +==== Info ====
 +---- datatemplatelist dttpllist ----
 +template: meta:template_datatemplatelist
 +cols    : Brand, Model, Versions, Device Type, Availability, Supported Since Commit_git, Supported since Rel, Supported current Rel, Unsupported, Instruction Set, Sub Instruction Set, Bootloader, Platform, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Hardwares, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Power supply, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_
 +filter  : Brand=AVM
 +filter  : Model*~fritz!box 5490
 +----
 +
 +^ [[wp>Instruction set]]        | [[wp>MIPS architecture|MIPS]]  |
 +^ Vendor                        | [[wp>Lantiq]] |
 +^ [[docs:techref:bootloader]]   | EVA Revision: 1.1964 Version: 2964  |
 +^ [[docs:techref:hardware:soc|System-On-Chip]]  | PSB 80920 EL  |
 +^ [[docs:techref:hardware:cpu|CPU]] @Frq        | 2 CPU - MIPS 34Kc VR9 on 500MHz/250MHz/250MHz  |
 +^ Flash size                | 8192 KiB + 524288 KiB / 512MiB  |
 +^ Flash Chip                | //distinct Chip//:TC58BVG2S0HTA00 Toshiba NAND-Flash 25ns, 512M x 8bit = 512MB, //distinct Chip//:TC58BVG2S0HTA00W25Q80BVS10 Serial-Flash 80MHz, 8M x 1bit / 4M x 2bit / 2M x 4bit = 1MB    |
 +^ RAM size                  | 512 MiB  |
 +^ RAM Chip                  | 2x FIXME  |
 +^ Hardware Bridge           | Xilinx Spartan XC3S100E  |
 +^ Wireless No1              | //distinct Chip//: Qualcomm-QCA9558-AT4A w/ 3x3 MIMO for 2.4GHz 802.11b/g/ |
 +^ Wireless No1 RAM size     | 128 MiB |
 +^ Wireless No1 RAM Chip     | Winbond W9751G6KB-25 |
 +^ Wireless No2              | //distinct Chip//: Qualcomm-QCA9880 AR1A w/ 3x3 MIMO for 2.4/5GHz 802.11a/b/g/n/ac  |
 +^ Wireless antenna          | 5x PCB, 1x Airgain N5X20SC (U.FL)  |
 +^ [[docs:techref:hardware:phy]]   | 1x Gigabit Atheros 8033  |
 +^ [[docs:techref:hardware:switch]]   | //distinct Chip//: Qualcomm-QCA8334-AL3C 7-port 5-phy 10/100/1000 Mbit/s Switch |
 +^ [[docs:techref:hardware:internet.access.technologies|Modem]]   | xDSL  |
 +^ Modem Chip                | Lantiq XWAY v1.1 PSB 80190  |
 +^ USB                       | //distinct Chip//: Renesas-µPD720202 w/ on the PCIe bus  2x USB 3.0 |
 +^ DECT                      | YES  |
 +^ Fiber port                | SPT-F351G-SxxD 1250Mbps Optical Transceiver, 10 or 20km Reach  |
 +^ [[docs:techref:hardware:port.serial|Serial]]  | internal:GND/TXD/RXD/3.3V:115200 N 8 R  |
 +^ [[docs:techref:hardware:port.jtag|JTAG]]      | Yes 2x14  |
 +
 +
 +==== Photos ====
 +
 +  * [[https://frixtender.de/kompatibilitaet-der-fritzbox-5490/]]
 +  * [[https://boxmatrix.info/wiki/FRITZ!Box_5490#Gallery]]
 +
 +==== Opening the case ====
 +**Note:** This will void your warranty!
 +
 +Four screws on the corners on bottom. Once screws removed, there is a small clip at the front that needs some gentle assistance. 
 +
 +** Case Bottom **
 +
 +** Main PCB **
 +
 +==== Serial ====
 +-> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
 +
 +The serial ports are located near the processing unit (with the heat sink on top): the serial port is the second row from left.
 +
 +The PCB has 3 columns of pin headers, columns from left to right and rows from top to bottom: (when looking at the board with the Fiber port on the top right). 
 +
 +                   serial port of Lantiq xRX200 soc.
 +                  /   Serial port of Qualcomm Atheros QCA9558 soc. for WASP 
 +                   /
 +      column:  1 2   3
 +  row:  
 +   1-GND->     O O   O
 +   2-TX->      O O   O
 +   3-RX->      O O   O
 +   4-3.3V->    O O   O
 +
 +
 +^ Serial connection parameters: 115200n8r (<baud><parity><bits><flow>) |
 +^ Example using pyserial:\\ pyserial-miniterm /dev/ttyUSB0 115200 --raw --eol CR |
 +
 +==== JTAG ====
 +-> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
 +
 +How to connect to the JTAG Port of this specific device:\\
 +FIXME
 +
 +===== Bootloader =====
 +Uses [[docs:techref:bootloader:eva|EVA]]. 
 +
 +Refer to EVA's tech reference for environment dump and commands its minimal shell supports:
 +[[docs:techref:bootloader:eva#fritzbox_7490_running_fritzos_v683|eva-7490-techref]]
 +
 +===== BootLogs =====
 +==== OEM bootlog ====
 +<WRAP bootlog>
 +<nowiki>
 +ROM VER: 1.1.4
 +CFG 05
 +DC! DC[\]
 +(AVM) EVA Revision: 1.2650
 +(C) Copyright 2005 AVM Date: Aug 14 2015 Time: 17:25:59 (0) 3 0x0-0x740D
 +
 +[FLASH:] WINBOND Uniform-Flash 1MB 256 Bytes WriteBuffer
 +[FLASH:](Eraseregion [0] 16 sectors a 64kB)
 +[NAND:] 512MB TOSHIBA 4096 Pagesize 256k Blocksize 2048 Blocks
 +[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
 +.Initializing external Switch
 +
 +Eva_AVM >go
 +##....................................................ExecuteProgram
 +
 +Lantiq xDSL CPE VR9
 +phym = 10000000, mem = 10000000, max_pfn = 00010000
 +Reserving memory for CP1 @0xb0000000, size 0x00000000
 +plat_device_tree_setup: AVM hardware subrevision 1
 +plat_device_tree_setup: using Fallback device-tree of AVM hardware subrevision 0
 +DT: d0 0d fe ed 00 00 15 06
 +[    0.000000] Linux version 3.10.73 (jwetter@EmbeddedVM) (gcc version 4.8.3 (Buildroot 2014.08) ) #1 SMP Tue Jan 26 17:55:05 CET 2016
 +[    0.000000] [env_init] 0x81019ab0[0]
 +[    0.000000] [env_init] 0x81019af0[1]
 +[    0.000000] [env_init] 0x81019bf0[2]
 +[    0.000000] [env_init] switch to ram location
 +[    0.000000] [init_avm_kernel_config] AVM Kernel Config (ptr 80825000)
 +[    0.000000] [init_avm_kernel_config] AVM Kernel Config: module memory entry
 +[    0.000000] [init_avm_kernel_config] AVM Kernel Config: version info entry
 +[    0.000000] [init_avm_kernel_config] AVM Kernel Config: device-tree for subrev 0 found
 +[    0.000000] bootconsole [early0] enabled
 +[    0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
 +[    0.000000] Determined physical RAM map:
 +[    0.000000]  memory: 10000000 @ 00000000 (usable)
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] [module-alloc] use 0x99b000 bytes at 0x81205000
 +[    0.000000] PERCPU: Embedded 7 pages/cpu @81ba4000 s7072 r8192 d13408 u32768
 +[    0.000000] Kernel command line: console=ttyS0,115200n8r nor_size=0MB sflash_size=1024KB nand_size=512MB ethaddr=38:xx:xx:xx:xx:80
 +[    0.000000] [NAND] nand_size = 0x20000000
 +[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
 +[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
 +[    0.000000] Writing ErrCtl register=0003d107
 +[    0.000000] Readback ErrCtl register=0003d107
 +[    0.000000] Memory: 240724k/262144k available (5705k kernel code, 21420k reserved, 2690k data, 300k init, 0k highmem)
 +[    0.000000] Hierarchical RCU implementation.
 +[    0.000000] NR_IRQS:181
 +[    0.000000] SRSConf0 0x3feffbfe: SRS1: 0xffffffff, SRS2 0xffffffff, SRS3 0xffffffff
 +[    0.000000] Lantiq ICU driver, version 3.0.1, (c) 2001-2011 Lantiq Deutschland GmbH
 +[    0.000000] Console: colour dummy device 80x25
 +[    0.000000] console [ttyS0] enabled, bootconsole disabled
 +[    0.000000] console [ttyS0] enabled, bootconsole disabled
 +[    0.020000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
 +[    0.080000] pid_max: default: 32768 minimum: 301
 +[    0.080000] Security Framework initialized
 +[    0.080000] Mount-cache hash table entries: 512
 +[    0.090000] CPU1 revision is: 00019556 (MIPS 34Kc)
 +[    0.170000] Brought up 2 CPUs
 +[    0.170000] [yield_context_init] cpu=1 tc=2 mask=300
 +[    0.180000] [yield_context_init] cpu=0 tc=3 mask=410
 +[    0.180000] devtmpfs: initialized
 +[    0.200000] pinctrl core: initialized pinctrl subsystem
 +[    0.200000] Creating Config Table
 +[    0.200000] [avm_generate_hw_config_table_from_device_tree] gpio_cnt: 48
 +[    0.210000] NET: Registered protocol family 16
 +[    0.220000] Reboot Status is: Power-On
 +[    0.220000] [TFFS3_Early_Init] called
 +[    0.230000] [avmnet] [avmnet_cfg_init] Driver version: 6.221.1.2  -  Revision 1496:3438  -  Fr 22. Jan 14:26:36 CET 2016
 +[    1.040000] Lantiq PCIe Root Complex driver, version 2.0.0, (c) 2001-2011 Lantiq Deutschland GmbH
 +[    1.090000] bio: create slab <bio-0> at 0
 +[    1.090000] PCI host bridge to bus 0000:00
 +[    1.100000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
 +[    1.100000] pci_bus 0000:00: root bus resource [io  0x1d800000-0x1d8fffff]
 +[    1.110000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
 +[    1.120000] ifx_pcie_rc_class_early_fixup port 0: fixed pcie host bridge to pci-pci bridge
 +[    1.130000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
 +[    1.130000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c001fff 64bit]
 +[    1.140000] pci 0000:00:00.0: PCI bridge to [bus 01]
 +[    1.150000] pci 0000:00:00.0:   bridge window [mem 0x1c000000-0x1c0fffff]
 +[    1.160000] NET: Registered protocol family 8
 +[    1.160000] NET: Registered protocol family 20
 +[    1.160000] Switching to clocksource MIPS
 +[    1.230000] NET: Registered protocol family 2
 +[    1.230000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
 +[    1.240000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
 +[    1.240000] TCP: Hash tables configured (established 2048 bind 2048)
 +[    1.250000] TCP: reno registered
 +[    1.250000] UDP hash table entries: 256 (order: 1, 8192 bytes)
 +[    1.260000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
 +[    1.270000] NET: Registered protocol family 1
 +[    1.280000] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
 +[    1.280000] Lantiq CGU driver, version 1.1.32, (c) 2001-2011 Lantiq Deutschland GmbH
 +[    1.290000] IFX DMA driver, version ifxmips_dma_core.c:v1.0.17, (c) 2009 Infineon Technologies AG
 +[    1.290000]  skb_shared_size:184
 +[    1.310000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    1.310000] fuse init (API version 7.22)
 +[    1.320000] msgmni has been set to 470
 +[    1.320000] io scheduler noop registered (default)
 +[    1.670000] ttyS0 at MMIO 0x1e100c00 (irq = 107) is a PORT_IFX_ASC
 +[    1.670000] ifx_usif_uart_init: uart_register_driver failed
 +[    1.680000] avm_net_trace: Up and running.
 +[    1.680000] [loadcontrol] set auto - scale=1
 +[    1.690000] Lantiq Thermal Sensor driver, version 1.0.3, (c) 2001-2011 Lantiq Deutschland GmbH
 +[    1.700000] ifx_pmu_init: Major 244
 +[    1.700000] Lantiq PMU driver, version 1.2.6, (c) 2001-2011 Lantiq Deutschland GmbH
 +[    1.710000] Lantiq GPIO driver, version 1.3.2, (c) 2001-2011 Lantiq Deutschland GmbH
 +[    1.720000] Infineon Technologies RCU driver version 1.0.7
 +[    1.740000] loop: module loaded
 +[    1.740000] nbd: registered device at major 43
 +[    1.770000] [HSNAND] Toshiba-BENAND
 +[    1.770000] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 4096, OOB size: 128
 +[    1.790000] Scanning device for bad blocks
 +[    1.990000] {tsh_read_ecc} status 0xe1
 +[    1.990000] [ifx_hsnand_command] read block failed (column: 0x1000 page: 0x18000)
 +[    2.000000] Bad eraseblock 1536 at 0x000018000000
 +[    2.000000] {tsh_read_ecc} status 0xe1
 +[    2.000000] [ifx_hsnand_command] read block failed (column: 0x1000 page: 0x18040)
 +[    2.010000] Bad eraseblock 1537 at 0x000018040000
 +[    2.070000] {tsh_read_ecc} status 0xe1
 +[    2.070000] [ifx_hsnand_command] read block failed (column: 0x1000 page: 0x1dd80)
 +[    2.080000] Bad eraseblock 1910 at 0x00001dd80000
 +[    2.080000] {tsh_read_ecc} status 0xe1
 +[    2.090000] [ifx_hsnand_command] read block failed (column: 0x1000 page: 0x1de00)
 +[    2.090000] Bad eraseblock 1912 at 0x00001de00000
 +[    2.120000] badblock statistics:
 +[    2.120000] --------------------
 +[    2.120000]   start block = 0
 +[    2.120000]   num blocks  = 2048
 +[    2.120000]   bad blocks  = 4
 +[    2.130000]
 +[    2.130000]   >> The following table summarize all badblocks to visualize the distribution
 +[    2.130000]   block [ start | count | size/kB ] (start block, number of blocks)
 +[    2.130000]   ---------------------------------
 +[    2.150000]   block [  1536 |     2 |     512 ]
 +[    2.160000]   block [  1910 |     1 |     256 ]
 +[    2.160000]   block [  1912 |     1 |     256 ]
 +[    2.170000]         [ ======================= ]
 +[    2.170000]              >>     4 |    1024 ]
 +[    2.180000] Creating 6 MTD partitions on "ifx_hsnand":
 +[    2.180000] 0x000000000000-0x000000400000 : "kernel"
 +[    2.190000] 0x000000400000-0x000003400000 : "filesystem"
 +[    2.200000] 0x000003400000-0x000003800000 : "reserved-kernel"
 +[    2.200000] 0x000003800000-0x000006800000 : "reserved-filesystem"
 +[    2.210000] 0x000006800000-0x000006a00000 : "config"
 +[    2.220000] 0x000006a00000-0x000020000000 : "nand-filesystem"
 +[    2.230000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_hsnand
 +[    2.230000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_sflash
 +[    2.240000] Creating 3 MTD partitions on "ifx_sflash":
 +[    2.250000] 0x000000000000-0x000000040000 : "urlader"
 +[    2.250000] 0x000000040000-0x0000000a0000 : "tffs (1)"
 +[    2.260000] 0x0000000a0000-0x000000100000 : "tffs (2)"
 +[    2.270000] Lantiq SPI flash driver, version 2.0.1, (c) 2001-2011 Lantiq Deutschland GmbH
 +[    2.280000] tun: Universal TUN/TAP device driver, 1.6
 +[    2.280000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
 +[    2.290000] SWAPI: Registered character device [switch_api] with major no [81]
 +[    2.290000] i2c /dev entries driver
 +[    2.300000] cpuidle: using governor ladder
 +[    2.300000] cpuidle: using governor menu
 +[    2.310000] AVM PA 4.3.14 2015-10-21
 +[    2.310000] AVM PA skb pktinfo at offset 136 size 196
 +[    2.310000] [loadcontrol]module avm_pa registered
 +[    2.320000] ipip: IPv4 over IPv4 tunneling driver
 +[    2.330000] TCP: cubic registered
 +[    2.330000] NET: Registered protocol family 10
 +[    2.330000] sit: IPv6 over IPv4 tunneling driver
 +[    2.340000] NET: Registered protocol family 17
 +[    2.340000] l2tp_core: L2TP core driver, V2.0
 +[    2.350000] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
 +[    2.350000] l2tp_netlink: L2TP netlink interface
 +[    2.360000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
 +[    2.360000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
 +[    2.370000] 8021q: 802.1Q VLAN Support v1.8
 +[    2.370000] Key type dns_resolver registered
 +[    2.380000] <ifx_fix_timing>
 +[    2.380000] [TFFS3_Init] No storage module registered, trying legacy fallback
 +[    2.390000] [TFFS3_Register_LGCY] Called
 +[    2.390000] [TFFS3_LGCY_Configure] Called
 +[    2.400000] [TFFS3_LGCY_Setup] using mtd7(tffs (1)), mtd8(tffs (2))
 +[    2.400000] [TFFS3_LGCY_Setup] mtd "tffs (1)": segment value 1
 +[    2.410000] [TFFS3_LGCY_Setup] mtd "tffs (2)": segment value 1
 +[    2.410000] [TFFS3_LGCY_Setup] Using segment 1 (avail: 1 + 1)
 +[    2.420000] [TFFS3_LGCY_Setup] mtd8 size=0x60000
 +[    2.430000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0)
 +[    2.430000] [rescan_segment] Called with mode=2
 +[    2.430000] TFFS: Clearing index for update
 +[    2.440000] Adam2 environment variables API installed.
 +[    2.450000] [simple-profiling]: 2 performance counters implemented, NEW_34K
 +[    2.450000] Enable Performance Counter 0 for Data cache load/stores (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable)
 +[    2.470000] Setup tcs=0x1 current_tc_mask=0x1, reg=0
 +[    2.470000] [simple-profiling]: 2 performance counters implemented, NEW_34K
 +[    2.480000] Enable Performance Counter 1 for Data cache load/store misses (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable)
 +[    2.490000] Setup tcs=0x1 current_tc_mask=0x1, reg=1
 +[    2.500000] {avmnet_cfg_netinit}
 +[    2.500000] [avmnet] No config found for HWRev 223, HWSubRev 1, Profile-ID 0, trying base config for HWSubRev
 +[    2.510000] [avmnet] No config found for HWRev 223, HWSubRev 1, trying base config for HWRev
 +[    2.520000] [avmnet] [avmnet_swi_7port_init] Init on module swi_vr9 called.
 +[    2.940000] [ppe_eth_init] init_hw()
 +[    2.940000] [init_hw] ppe_hw_init=0xff successful
 +[    2.940000] [ppe_eth_init] ifx_proc_file_create()
 +[    2.950000] [ppe_eth_init] dma_setup_init()
 +[    2.950000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48
 +[    2.960000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48
 +[    3.720000] [avmnet] [avmnet_ar8334_vlan_setup]
 +[    6.620000] [avmnet_set_macaddr] Setup Mac Addr for Device(wan): 38:xx:xx:xx:xx:x4
 +[    6.630000] avmnet: avm_pa: register pid wan
 +[    6.640000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth0): 38:xx:xx:xx:xx:x0
 +[    6.650000] avmnet: avm_pa: register pid eth0
 +[    6.650000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth1): 38:xx:xx:xx:xx:x1
 +[    6.660000] avmnet: avm_pa: register pid eth1
 +[    6.660000] [avmnet] [ifx_ppa_setup_priv] VlanID no realdev eth2.2
 +[    6.670000] avmnet: avm_pa: register pid eth2.2
 +[    6.670000] [avmnet] [ifx_ppa_setup_priv] VlanID no realdev eth3.3
 +[    6.680000] avmnet: avm_pa: register pid eth3.3
 +[    6.680000] [avmnet_set_macaddr] Setup Mac Addr for Device(wasp): 00:xx:xx:xx:xx:xa
 +[    6.690000] [avmnet_create_netdevice] setup offload_cpu_link on device wasp
 +[    6.700000] avmnet: avm_pa: register pid wasp
 +[    6.700000] [avmnet_set_macaddr] Setup Mac Addr for Device(switch): 38:xx:xx:xx:xx:x5
 +[    6.710000] avmnet: avm_pa: register pid switch
 +[    6.750000] SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock1
 +[    6.750000] yaffs: dev is 32505857 name is "mtdblock1" ro
 +[    6.760000] yaffs: passed flags ""
 +[    6.780000] VFS: Mounted root (yaffs filesystem) readonly on device 31:1.
 +[    6.790000] devtmpfs: mounted
 +[    6.790000] Freeing unused kernel memory: 300K (80835000 - 80880000)
 +[    7.840000] TFFS Name Table L
 +[    9.070000] [avm_urlader_env_set_variable] opening ID 0x1ae for writing
 +[    9.190000] led_modul_Fritz_Box_HW223: module license '
 +[    9.190000] (C) Copyright 2012 by AVM
 +[    9.190000] ' taints kernel.
 +[    9.200000] Disabling lock debugging due to kernel taint
 +[    9.200000] [module-alloc-by-name] give 0x1b000 bytes at 0x81205000 to module 'led_modul_Fritz_Box_HW223' (0x980000 bytes left)
 +[    9.230000] [LED] use GPIO 45 for 'gpio_avm_led_power'
 +[    9.230000] [LED] use GPIO 47 for 'gpio_avm_led_fiber'
 +[    9.240000] [LED] use GPIO 36 for 'gpio_avm_led_wlan'
 +[    9.240000] [LED] use GPIO 35 for 'gpio_avm_led_internet'
 +[    9.250000] [LED] use GPIO 33 for 'gpio_avm_led_info'
 +[    9.250000] [LED] use GPIO 46 for 'gpio_avm_led_info_red'
 +[    9.260000] [BUTTON] use GPIO 29 for 'gpio_avm_button_wlan'
 +[    9.260000] [BUTTON] use GPIO 1 for 'gpio_avm_button_dect'
 +[    9.280000] AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
 +[   10.450000] [module-alloc-by-name] give 0x3000 bytes at 0x81220000 to module 'rtc_avm' (0x97d000 bytes left)
 +[   10.460000] rtc-avm rtc-avm.0: rtc core: registered avm as rtc0
 +[   10.460000] [avm-rtc]: avm_rtc_probe: register: ret=0x8f716800
 +[   10.470000] [avm-rtc]: avm_rtc_probe: success
 +[   10.670000]
 +[   10.670000] [avm_debug] redirecting kernel-messages (/dev/debug)
 +</nowiki>
 +</WRAP>\\
 +
 +==== OpenWrt bootlog ====
 +<WRAP bootlog>
 +<nowiki>
 +ROM VER: 1.1.4
 +CFG 05
 +
 +(AVM) EVA Revision: 1.2650
 +(C) Copyright 2005 AVM Date: Aug 14 2015 Time: 17:25:59 (0) 3 0x0-0x740D
 +
 +[FLASH:] WINBOND Uniform-Flash 1MB 256 Bytes WriteBuffer
 +[FLASH:](Eraseregion [0] 16 sectors a 64kB) 
 +[NAND:] 512MB TOSHIBA 4096 Pagesize 256k Blocksize 2048 Blocks
 +[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
 +.Initializing external Switch
 +
 +Eva_AVM >##.................................................................ExecuteProgram
 +[    0.000000] Linux version 5.10.64 (linuxinside@pluto) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 10.3.0 r17573-14e2b33771) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #0 SMP Wed Sep 15 18:36:45 2021
 +[    0.000000] SoC: xRX200 rev 1.2
 +[    0.000000] printk: bootconsole [early0] enabled
 +[    0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
 +[    0.000000] MIPS: machine is AVM FRITZ!Box 5490
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] Detected 1 available secondary CPU(s)
 +[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
 +[    0.000000] Zone ranges:
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001fffffff]
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
 +[    0.000000] percpu: Embedded 14 pages/cpu s26448 r8192 d22704 u57344
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
 +[    0.000000] Kernel command line: console=ttyLTQ0,115200
 +[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
 +[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
 +[    0.000000] Writing ErrCtl register=0003d104
 +[    0.000000] Readback ErrCtl register=0003d104
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
 +[    0.000000] Memory: 249008K/262144K available (6671K kernel code, 619K rwdata, 1656K rodata, 1276K init, 211K bss, 13136K reserved, 0K cma-reserved)
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 +[    0.000000] rcu: Hierarchical RCU implementation.
 +[    0.000000] Tracing variant of Tasks RCU enabled.
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
 +[    0.000000] NR_IRQS: 256
 +[    0.000000] random: get_random_bytes called from start_kernel+0x3d4/0x5ec with crng_init=0
 +[    0.000000] CPU Clock: 500MHz
 +[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
 +[    0.000012] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
 +[    0.007914] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
 +[    0.074000] pid_max: default: 32768 minimum: 301
 +[    0.078933] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
 +[    0.086127] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
 +[    0.097853] rcu: Hierarchical SRCU implementation.
 +[    0.103008] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
 +[    0.111044] smp: Bringing up secondary CPUs ...
 +[    0.116696] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
 +[    0.116713] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
 +[    0.116813] CPU1 revision is: 00019556 (MIPS 34Kc)
 +[    0.170838] Synchronize counters for CPU 1: done.
 +[    0.195166] smp: Brought up 1 node, 2 CPUs
 +[    0.206404] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 +[    0.216185] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
 +[    0.223127] pinctrl core: initialized pinctrl subsystem
 +[    0.229621] NET: Registered protocol family 16
 +[    0.273061] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
 +[    0.280453] gpio-484 (pcie-rst-dev): hogged as output/low
 +[    0.285827] gpio-476 (usb-vbus): hogged as output/high
 +[    0.291113] gpio-467 (wasp-wakeup): hogged as output/high
 +[    0.296933] pinctrl-xway 1e100b10.pinmux: Init done
 +[    0.302181] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
 +[    0.310528] PCI host bridge /fpi@10000000/pci@e105400 ranges:
 +[    0.316304]  MEM 0x0000000018000000..0x0000000019ffffff
 +[    0.321504]   IO 0x000000001ae00000..0x000000001affffff
 +[    0.394087] random: fast init done
 +[    0.401920] usbcore: registered new interface driver usbfs
 +[    0.407529] usbcore: registered new interface driver hub
 +[    0.413001] usbcore: registered new device driver usb
 +[    0.421207] PCI host bridge to bus 0000:00
 +[    0.425273] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
 +[    0.432174] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
 +[    0.439137] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
 +[    0.445971] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
 +[    0.459951] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
 +[    0.467356] clocksource: Switched to clocksource MIPS
 +[    0.475443] NET: Registered protocol family 2
 +[    0.480193] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
 +[    0.489332] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
 +[    0.497690] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
 +[    0.505394] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
 +[    0.512728] TCP: Hash tables configured (established 2048 bind 2048)
 +[    0.519292] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
 +[    0.525731] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
 +[    0.533458] NET: Registered protocol family 1
 +[    0.537831] PCI: CLS 0 bytes, default 32
 +[    0.543228] gptu: totally 6 16-bit timers/counters
 +[    0.548283] gptu: misc_register on minor 63
 +[    0.552474] gptu: succeeded to request irq 126
 +[    0.556901] gptu: succeeded to request irq 127
 +[    0.561479] gptu: succeeded to request irq 128
 +[    0.565907] gptu: succeeded to request irq 129
 +[    0.570518] gptu: succeeded to request irq 130
 +[    0.574957] gptu: succeeded to request irq 131
 +[    0.579691] No VPEs reserved for AP/SP, not initialize VPE loader
 +[    0.579691] Pass maxvpes=<n> argument as kernel argument
 +[    0.591091] No TCs reserved for AP/SP, not initializing RTLX.
 +[    0.591091] Pass maxtcs=<n> argument as kernel argument
 +[    0.604745] workingset: timestamp_bits=14 max_order=16 bucket_order=2
 +[    0.619651] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    0.625329] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    0.640643] gpio-export gpio-export: 1 gpio(s) exported
 +[    0.648679] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
 +[    0.657645] printk: console [ttyLTQ0] enabled
 +[    0.657645] printk: console [ttyLTQ0] enabled
 +[    0.666332] printk: bootconsole [early0] disabled
 +[    0.666332] printk: bootconsole [early0] disabled
 +[    0.680097] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xdc
 +[    0.685019] nand: Toshiba NAND 512MiB 3,3V 8-bit
 +[    0.689648] nand: 512 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 128
 +[    0.697411] Scanning device for bad blocks
 +[    0.949399] Bad eraseblock 1536 at 0x000018000000
 +[    0.952744] Bad eraseblock 1537 at 0x000018040000
 +[    1.017236] Bad eraseblock 1910 at 0x00001dd80000
 +[    1.020821] Bad eraseblock 1912 at 0x00001de00000
 +[    1.047053] 6 fixed-partitions partitions found on MTD device 14000000.flash
 +[    1.052709] Creating 6 MTD partitions on "14000000.flash":
 +[    1.058189] 0x000000000000-0x000000400000 : "kernel"
 +[    1.064532] 0x000000400000-0x000003400000 : "filesystem"
 +[    1.070444] 0x000003400000-0x000003800000 : "reserved-kernel"
 +[    1.076374] 0x000003800000-0x000006800000 : "reserved-filesystem"
 +[    1.084869] 0x000006800000-0x000006a00000 : "config"
 +[    1.090471] 0x000006a00000-0x000020000000 : "ubi"
 +[    1.109936] spi-lantiq-ssc 1e100800.spi: Lantiq SSC SPI controller (Rev 8, TXFS 8, RXFS 8, DMA 1)
 +[    1.121252] spi-nor spi0.4: s25fl008k (1024 Kbytes)
 +[    1.124753] 3 fixed-partitions partitions found on MTD device spi0.4
 +[    1.131135] Creating 3 MTD partitions on "spi0.4":
 +[    1.135830] 0x000000000000-0x000000040000 : "urlader"
 +[    1.142417] 0x000000040000-0x0000000a0000 : "tffs (1)"
 +[    1.147903] 0x0000000a0000-0x000000100000 : "tffs (2)"
 +[    1.160131] libphy: Fixed MDIO Bus: probed
 +[    1.498856] libphy: lantiq,xrx200-mdio: probed
 +[    1.512530] gswip 1e108000.switch: dsa switch register failed: -517
 +[    1.523661] membase: ae10b100
 +[    1.536536] NET: Registered protocol family 10
 +[    1.552096] Segment Routing with IPv6
 +[    1.554449] NET: Registered protocol family 17
 +[    1.559022] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
 +[    1.572511] 8021q: 802.1Q VLAN Support v1.8
 +[    1.581716] pcie-xrx200 1d900000.pcie: failed to get the PCIe PHY
 +[    1.908587] libphy: lantiq,xrx200-mdio: probed
 +[    1.957739] DSA: tree 0 has no CPU port
 +[    1.960178] qca8k: probe of 1e108000.switch-mii:10 failed with error -22
 +[    2.058311] gswip 1e108000.switch fiber (uninitialized): PHY [1e108000.switch-mii:06] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
 +[    2.076906] gswip 1e108000.switch lan2 (uninitialized): PHY [1e108000.switch-mii:05] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
 +[    2.093587] gswip 1e108000.switch lan1 (uninitialized): PHY [1e108000.switch-mii:09] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
 +[    2.110968] DSA: tree 0 setup
 +[    2.112555] gswip 1e108000.switch: probed GSWIP version 21 mod 0
 +[    2.119787] pcie-xrx200 1d900000.pcie: switch pcie endianess requested
 +[    2.259288] PCI host bridge /fpi@10000000/pcie@d900000 ranges:
 +[    2.263977] PCI host bridge to bus 0000:01
 +[    2.267884] pci_bus 0000:01: root bus resource [mem 0x1c000000-0x1cffffff]
 +[    2.274669] pci_bus 0000:01: root bus resource [io  0x1d800000-0x1d8fffff]
 +[    2.281595] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
 +[    2.288400] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
 +[    2.296296] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
 +[    2.313980] pci 0000:01:00.0: ifx_pcie_rc_class_early_fixup+0x0/0x80 took 17217 usecs
 +[    2.320462] pci 0000:01:00.0: [1bef:0011] type 01 class 0x060400
 +[    2.326512] pci 0000:01:00.0: PME# supported from D0 D3hot
 +[    2.335620] pci 0000:01:00.0: bridge configuration invalid ([bus 02-00]), reconfiguring
 +[    2.342653] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
 +[    2.348374] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
 +[    2.355226] pci 0000:02:00.0: PME# supported from D0 D3hot
 +[    2.360634] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:01:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
 +[    2.379069] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 +[    2.384258] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 02
 +[    2.390963] pci 0000:01:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
 +[    2.397752] pci 0000:02:00.0: BAR 0: assigned [mem 0x1c000000-0x1c001fff 64bit]
 +[    2.404985] pci 0000:01:00.0: PCI bridge to [bus 02]
 +[    2.410011] pci 0000:01:00.0:   bridge window [mem 0x1c000000-0x1c0fffff]
 +[    2.416885] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1 
 +[    2.423380] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
 +[    2.429710] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
 +[    2.436366] pci 0000:02:00.0: enabling device (0000 -> 0002)
 +[    2.446687] pci 0000:02:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
 +[    2.453108] pci 0000:02:00.0: quirk_usb_early_handoff+0x0/0x8f0 took 16358 usecs
 +[    2.461545] UBI: auto-attach mtd5
 +[    2.463768] ubi0: attaching mtd5
 +[    2.706750] ubi0: scanning is finished
 +[    2.725935] ubi0: attached mtd5 (name "ubi", size 406 MiB)
 +[    2.730069] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes
 +[    2.736843] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 1024
 +[    2.743711] ubi0: VID header offset: 1024 (aligned 1024), data offset: 4096
 +[    2.750680] ubi0: good PEBs: 1620, bad PEBs: 4, corrupted PEBs: 0
 +[    2.756687] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
 +[    2.763974] ubi0: max/mean erase counter: 3/2, WL threshold: 4096, image sequence number: 278102684
 +[    2.773042] ubi0: available PEBs: 0, total reserved PEBs: 1620, PEBs reserved for bad PEB handling: 36
 +[    2.782408] ubi0: background thread "ubi_bgt0d" start[    2.790819] UBIFS (ubi0:0): Mounting in unauthenticated mode
 +[    2.795475] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 478
 +[    2.895976] UBIFS (ubi0:0): recovery needed
 +[    3.134333] UBIFS (ubi0:0): recovery completed
 +[    3.137605] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
 +[    3.144743] UBIFS (ubi0:0): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
 +[    3.154734] UBIFS (ubi0:0): FS size: 405135360 bytes (386 MiB, 1570 LEBs), journal size 9420800 bytes (8 MiB, 37 LEBs)
 +[    3.165499] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
 +[    3.171274] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID <xxx>, small LPT model
 +[    3.183022] VFS: Mounted root (ubifs filesystem) on device 0:11.
 +[    3.190504] Freeing unused kernel memory: 1276K
 +[    3.193583] This architecture does not have kernel memory protection.
 +[    3.200107] Run /sbin/init as init process
 +[    3.312145] init: Console is alive
 +[    3.315556] init: - watchdog -
 +[    3.471702] kmodloader: loading kernel modules from /etc/modules-boot.d/*
 +[    3.701437] SCSI subsystem initialized
 +[    3.758089] ifx_pcie_bios_map_irq port 0 dev 0000:02:00.0 slot 0 pin 1 
 +[    3.763260] ifx_pcie_bios_map_irq dev 0000:02:00.0 irq 144 assigned
 +[    3.774261] got firmware version: 2026.
 +[    4.129896] xhci_hcd 0000:02:00.0: xHCI Host Controller
 +[    4.137706] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
 +[    4.150419] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000090
 +[    4.159463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
 +[    4.166385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 +[    4.173702] usb usb1: Product: xHCI Host Controller
 +[    4.178557] usb usb1: Manufacturer: Linux 5.10.64 xhci-hcd
 +[    4.183962] usb usb1: SerialNumber: 0000:02:00.0
 +[    4.189848] hub 1-0:1.0: USB hub found
 +[    4.192563] hub 1-0:1.0: 2 ports detected
 +[    4.197542] xhci_hcd 0000:02:00.0: xHCI Host Controller
 +[    4.201631] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
 +[    4.209118] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
 +[    4.215513] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
 +[    4.224111] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
 +[    4.231677] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 +[    4.238869] usb usb2: Product: xHCI Host Controller
 +[    4.243692] usb usb2: Manufacturer: Linux 5.10.64 xhci-hcd
 +[    4.249244] usb usb2: SerialNumber: 0000:02:00.0
 +[    4.254779] hub 2-0:1.0: USB hub found
 +[    4.257778] hub 2-0:1.0: 2 ports detected
 +[    4.279563] usbcore: registered new interface driver usb-storage
 +[    4.284627] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
 +[    4.296751] init: - preinit -
 +[    4.783107] random: jshn: uninitialized urandom read (4 bytes read)
 +[    4.894675] random: jshn: uninitialized urandom read (4 bytes read)
 +[    5.407372] random: crng init done
 +[    6.748826] gswip 1e108000.switch lan1: configuring for phy/internal link mode
 +[    6.754969] 8021q: adding VLAN 0 to HW filter on device lan1
 +Press the [f] key and hit [enter] to enter failsafe mode
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
 +[   10.970181] mount_root: mounting /dev/root
 +[   10.978705] urandom-seed: Seeding with /etc/urandom.seed
 +[   11.065572] procd: - early -
 +[   11.068449] procd: - watchdog -
 +[   11.675766] procd: - watchdog -
 +[   11.680208] procd: - ubus -
 +[   11.738829] procd: - init -
 +Please press Enter to activate this console.
 +[   12.692307] kmodloader: loading kernel modules from /etc/modules.d/*
 +[   12.724865] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
 +[   12.879428] Infineon Technologies DEU driver version 2.0.0 
 +[   12.887014] IFX DEU DES initialized (multiblock).
 +[   12.895345] IFX DEU AES initialized (multiblock).
 +[   12.899918] IFX DEU ARC4 initialized (multiblock).
 +[   12.904062] IFX DEU SHA1 initialized.
 +[   12.907815] IFX DEU MD5 initialized.
 +[   12.911228] IFX DEU SHA1_HMAC initialized.
 +[   12.915354] IFX DEU MD5_HMAC initialized.
 +[   12.968043] usbcore: registered new interface driver usbserial_generic
 +[   12.973517] usbserial: USB Serial support registered for generic
 +[   13.012599] xt_time: kernel timezone is -0000
 +[   13.019858] usbcore: registered new interface driver ch341
 +[   13.024302] usbserial: USB Serial support registered for ch341-uart
 +[   13.039656] usbcore: registered new interface driver cp210x
 +[   13.044198] usbserial: USB Serial support registered for cp210x
 +[   13.064467] usbcore: registered new interface driver ftdi_sio
 +[   13.069339] usbserial: USB Serial support registered for FTDI USB Serial Device
 +[   13.206786] kmodloader: done loading kernel modules from /etc/modules.d/*
 +[   13.246216] urngd: v1.0.2 started.
 +[   18.725440] device eth0 entered promiscuous mode
 +[   18.729034] gswip 1e108000.switch lan1: configuring for phy/internal link mode
 +[   18.742743] 8021q: adding VLAN 0 to HW filter on device lan1
 +[   18.747966] br-lan: port 1(lan1) entered blocking state
 +[   18.752250] br-lan: port 1(lan1) entered disabled state
 +[   18.758351] device lan1 entered promiscuous mode
 +[   18.816705] gswip 1e108000.switch lan2: configuring for phy/internal link mode
 +[   18.843796] 8021q: adding VLAN 0 to HW filter on device lan2
 +[   18.849733] br-lan: port 2(lan2) entered blocking state
 +[   18.853538] br-lan: port 2(lan2) entered disabled state
 +[   18.859726] device lan2 entered promiscuous mode
 +
 +
 +
 +BusyBox v1.34.0 (2021-09-15 18:36:45 UTC) built-in shell (ash)
 +
 +  _______                     ________        __
 +       |.-----.-----.-----.|  |  |  |.----.|  |_
 +     ||  _  |  -__|     ||  |  |  ||   _||   _|
 + |_______||   __|_____|__|__||________||__|  |____|
 +          |__| W I R E L E S S   F R E E D O M
 + -----------------------------------------------------
 + OpenWrt SNAPSHOT, r17576-636cdcda1e
 + -----------------------------------------------------
 +root@OpenWrt:/# df
 +Filesystem           1K-blocks      Used Available Use% Mounted on
 +ubi0:rootfs             370696      5028    365668   1% /
 +tmpfs                   125140        36    125104   0% /tmp
 +tmpfs                      512               512   0% /dev
 +</nowiki>
 +</WRAP>\\
 +
 +===== Notes =====
 +
 +  * OEM source code available at: [[http://osp.avm.de/fritzbox/fritzbox-5490/]]
 +  * Hardwareinfo: [[https://boxmatrix.info/wiki/FRITZ!Box_5490]]
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>lantiq VRX288 512NAND 256RAM Fiber DECT 802.11ac 802.11bgn 4port GigabitEthernet FXO unsupported}}
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1