AVM FRITZ!Box 7360 v2

ROM VER: 1.1.4 CFG 01 (AVM) EVA Revision: 1.1475 Version: 2475 (C) Copyright 2005 AVM Date: Nov 19 2012 Time: 11:39:47 (0) 2 0x0-0xB40D [FLASH:] MACRONIX Uniform-Flash 32MB 64 Bytes WriteBuffer [FLASH:](Eraseregion [0] 256 sectors a 128kB) [SYSTEM:] VR9 on 500MHz/250MHz/250MHz .Atheros 8030/35 detected Eva_AVM >.......................................................... Lantiq xDSL CPE VR9 phym = 08000000, mem = 08000000, max_pfn = 00008000 Reserving memory for CP1 @0xa8000000, size 0x00000000 plat_device_tree_setup: AVM hardware subrevision 2 plat_device_tree_setup: using Fallback device-tree of AVM hardware subrevision 0 DT: d0 0d fe ed 00 00 0b fd [ 0.000000] Linux version 3.10.73 (jpluschke@Version_43065_C16N2) (gcc version 4.8.3 (Buildroot 2014.08) ) #1 SMP Wed Aug 21 16:16:57 CEST 2019 [ 0.000000] [env_init] 0x81016260[0] [ 0.000000] [env_init] 0x810162a0[1] [ 0.000000] [env_init] 0x810163a0[2] [ 0.000000] [env_init] switch to ram location [ 0.000000] [init_avm_kernel_config] AVM Kernel Config (ptr 80847000) [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: module memory entry [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: version info entry [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: device-tree for subrev 0 found [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc) [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] [module-alloc] use 0xdcf000 bytes at 0x81104000 [ 0.000000] [0]lsmtc_smp_setup tcstatus=18102400 [ 0.000000] PERCPU: Embedded 7 pages/cpu @81ed7000 s7072 r8192 d13408 u32768 [ 0.000000] Kernel command line: console=ttyS0,115200n8r nor_size=32MB sflash_size=0KB nand_size=0MB ethaddr=xx:xx:xx:xx:xx:xx [ 0.000000] [NAND] nand_size = 0x0 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=0000a610 [ 0.000000] Readback ErrCtl register=0000a610 [ 0.000000] Memory: 106320k/131072k available (5583k kernel code, 24752k reserved, 2948k data, 292k init, 0k highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:181 [ 0.000000] SRSConf0 0x3feffbfe: SRS1: 0xffffffff, SRS2 0xffffffff, SRS3 0xffffffff [ 0.000000] Lantiq ICU driver, version 3.0.1, (c) 2001-2011 Lantiq Deutschland GmbH [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.020000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Security Framework initialized [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] CPU1 revision is: 00019556 (MIPS 34Kc) [ 0.170000] Brought up 2 CPUs [ 0.170000] [yield_context_init] cpu=1 tc=2 mask=301 [ 0.180000] [yield_context_init] cpu=0 tc=3 mask=2410 [ 0.180000] devtmpfs: initialized [ 0.200000] pinctrl core: initialized pinctrl subsystem [ 0.200000] Creating Config Table [ 0.200000] [avm_generate_hw_config_table_from_device_tree] gpio_cnt: 27 [ 0.210000] NET: Registered protocol family 16 [ 0.220000] avm_check_cpu_features: mips-options: 0x006d638b icache.flags 0x00000000 dcache.flags 0x00000004 isa_level 0x00000063 ases 00000031 [ 0.230000] [TFFS3_Early_Init] called [ 0.230000] avm_alloc_page_extension node_extension_table[0] entries=32768 (size=131072) alloced [ 0.240000] Reboot Status is: Power-On [ 0.240000] [avmnet] [avmnet_cfg_init] Driver version: 6.247.6.1 - Revision 1496:3758 - Mi 21. Aug 16:13:57 CEST 2019 [ 1.050000] Lantiq PCIe Root Complex driver, version 2.0.0, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.100000] bio: create slab <bio-0> at 0 [ 1.100000] PCI host bridge to bus 0000:00 [ 1.100000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff] [ 1.110000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff] [ 1.110000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.120000] ifx_pcie_rc_class_early_fixup port 0: fixed pcie host bridge to pci-pci bridge [ 1.130000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff] [ 1.130000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c00ffff 64bit] [ 1.140000] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.140000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff] [ 1.150000] NET: Registered protocol family 8 [ 1.160000] NET: Registered protocol family 20 [ 1.160000] Switching to clocksource MIPS [ 1.210000] NET: Registered protocol family 2 [ 1.220000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 1.220000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 1.230000] TCP: Hash tables configured (established 1024 bind 1024) [ 1.230000] TCP: reno registered [ 1.240000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.240000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.250000] avm_pa: try to activate hw accelaration for pid 1 (ipv4) [ 1.260000] NET: Registered protocol family 1 [ 1.260000] Lantiq CGU driver, version 1.1.32, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.270000] IFX DMA driver, version ifxmips_dma_core.c:v1.0.17, (c) 2009 Infineon Technologies AG [ 1.270000] skb_shared_size:184 [ 1.280000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.290000] fuse init (API version 7.22) [ 1.290000] msgmni has been set to 207 [ 1.300000] io scheduler noop registered (default) [ 1.640000] ttyS0 at MMIO 0x1e100c00 (irq = 107) is a PORT_IFX_ASC [ 1.640000] ifx_usif_uart_init: uart_register_driver failed [ 1.650000] avm_net_trace: Up and running. [ 1.650000] [loadcontrol] set auto - scale=1 [ 1.660000] Lantiq Thermal Sensor driver, version 1.0.3, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.670000] ifx_pmu_init: Major 244 [ 1.670000] Lantiq PMU driver, version 1.2.6, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.680000] Lantiq GPIO driver, version 1.3.2, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.690000] Infineon Technologies RCU driver version 1.0.7 [ 1.710000] loop: module loaded [ 1.710000] nbd: registered device at major 43 [ 1.740000] ltq-nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e [ 1.750000] Amd/Fujitsu Extended Query Table at 0x0040 [ 1.750000] Amd/Fujitsu Extended Query version 1.3. [ 1.760000] number of CFI chips: 1 [ 1.760000] [ifx_jffs2_parser_function] magic 19852003 found @pos 0x1e80000, size 1048576 [ 1.770000] [ifx_ext2fs_parser_function] exit on mtd ltq-nor [ 1.810000] 6 find_squashfs partitions found on MTD device ltq-nor [ 1.810000] Creating 6 MTD partitions on "ltq-nor": [ 1.820000] 0x000000283e00-0x000001f80000 : "rootfs" [ 1.820000] mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only [ 1.830000] 0x000000020000-0x000000283e00 : "kernel" [ 1.840000] mtd: partition "kernel" doesn't end on an erase block -- force read-only [ 1.850000] 0x000000000000-0x000000020000 : "urlader" [ 1.860000] 0x000001f80000-0x000001fc0000 : "tffs (1)" [ 1.860000] 0x000001fc0000-0x000002000000 : "tffs (2)" [ 1.870000] 0x000001e80000-0x000001f80000 : "jffs2" [ 1.880000] tun: Universal TUN/TAP device driver, 1.6 [ 1.880000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.890000] SWAPI: Registered character device [switch_api] with major no [81] [ 1.890000] i2c /dev entries driver [ 1.900000] cpuidle: using governor ladder [ 1.900000] cpuidle: using governor menu [ 1.910000] AVM PA for Linux 3.10.73 [ 1.910000] AVM PA skb pktinfo at offset 136 size 208 [ 1.920000] [loadcontrol]module avm_pa registered [ 1.920000] u32 classifier [ 1.920000] Performance counters on [ 1.930000] Actions configured [ 1.930000] ipip: IPv4 over IPv4 tunneling driver [ 1.940000] TCP: cubic registered [ 1.940000] NET: Registered protocol family 10 [ 1.940000] avm_pa: try to activate hw accelaration for pid 2 (ipv6) [ 1.950000] sit: IPv6 over IPv4 tunneling driver [ 1.960000] NET: Registered protocol family 17 [ 1.960000] Bridge broadcast ratelimiter registered [ 1.960000] l2tp_core: L2TP core driver, V2.0 [ 1.970000] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 1.970000] l2tp_netlink: L2TP netlink interface [ 1.980000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 1.980000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 1.990000] 8021q: 802.1Q VLAN Support v1.8 [ 1.990000] Key type dns_resolver registered [ 2.000000] [TFFS3_Init] No storage module registered, trying legacy fallback [ 2.010000] [TFFS3_Register_LGCY] Called [ 2.010000] [TFFS3_LGCY_Configure] Called [ 2.020000] [TFFS3_LGCY_Setup] using mtd3(tffs (1)), mtd4(tffs (2)) [ 2.020000] [TFFS3_LGCY_Setup] mtd "tffs (1)": segment value 2 [ 2.030000] [TFFS3_LGCY_Setup] mtd "tffs (2)": segment value 1 [ 2.030000] [TFFS3_LGCY_Setup] Using segment 2 (avail: 2 + 1) [ 2.040000] [TFFS3_LGCY_Setup] mtd3 size=0x40000 [ 2.040000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0) [ 2.040000] [rescan_segment] Called with mode=2 [ 2.040000] TFFS: Clearing index for update [ 2.060000] Adam2 environment variables API installed. [ 2.070000] [simple-profiling]:2 performance counters implemented, NEW_34K [ 2.070000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=0) all cores tc: 0 [ 2.080000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=0) all cores tc: 0 [ 2.100000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=1) all cores tc: 1 [ 2.110000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=1) all cores tc: 1 [ 2.120000] [simple-profiling]Enable Performance Counter 0 for Main pipeline stalls (P) (User Supervisor Kernel Exception TC-ID=2) all cores tc: 2 [ 2.140000] [simple-profiling]Enable Performance Counter 1 for Cycles (P) (User Supervisor Kernel Exception TC-ID=2) all cores tc: 2 [ 2.150000] [simple-profiling]Enable Performance Counter 0 for Data cache load/stores (User Supervisor Kernel Exception TC-ID=3) all cores tc: 3 [ 2.160000] [simple-profiling]Enable Performance Counter 1 for Data cache load/store misses (User Supervisor Kernel Exception TC-ID=3) all cores tc: 3 [ 2.180000] [simple-profiling]all cores:performance-mode (round-robin): cpus on [ 2.180000] {avmnet_cfg_netinit} [ 2.190000] [avmnet] No config found for HWRev 196, HWSubRev 2, Profile-ID 0, trying base config for HWSubRev [ 2.200000] [avmnet] No config found for HWRev 196, HWSubRev 2, trying base config for HWRev [ 2.210000] [avmnet] [avmnet_swi_7port_init] Init on module swi_vr9 called. [ 2.630000] [ppe_eth_init] init_hw() [ 2.630000] [init_hw] ppe_hw_init=0xff successful [ 2.640000] [ppe_eth_init] ifx_proc_file_create() [ 2.640000] [ppe_eth_init] dma_setup_init() [ 2.650000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x68 [ 2.660000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x68 [ 2.790000] [avmnet] [avmnet_links_port_update] Maximum port number 0 exceeded with 2! [ 2.800000] [avm_event_main][avm_event_source_check_id]: not registered [ 2.910000] [avmnet] [avmnet_links_port_update] Maximum port number 0 exceeded with 2! [ 5.480000] avm_pa: try to activate hw accelaration for pid 1 (ipv4) [ 5.480000] avm_pa: tx channel activated, pid 1 (ipv4) [ 5.490000] avm_pa: try to activate hw accelaration for pid 2 (ipv6) [ 5.490000] avm_pa: tx channel activated, pid 2 (ipv6) [ 5.500000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth0): xx:xx:xx:xx:xx:xx [ 5.510000] avmnet: avm_pa: register pid eth0 [ 5.510000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth1): xx:xx:xx:xx:xx:xx [ 5.520000] avmnet: avm_pa: register pid eth1 [ 5.520000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth2): xx:xx:xx:xx:xx:xx [ 5.530000] avmnet: avm_pa: register pid eth2 [ 5.540000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth3): xx:xx:xx:xx:xx:xx [ 5.550000] avmnet: avm_pa: register pid eth3 [ 5.610000] VFS: Mounted root (squashfs filesystem) readonly on device 31:0. [ 5.620000] devtmpfs: mounted [ 5.620000] Freeing unused kernel memory: 292K (80857000 - 808a0000) [ 6.480000] TFFS Name Table L [ 8.020000] led_modul_Fritz_Box_HW196: module license ' [ 8.020000] (C) Copyright 2012 by AVM [ 8.020000] ' taints kernel. [ 8.030000] Disabling lock debugging due to kernel taint [ 8.040000] [module-alloc-by-name] give 0x1d000 bytes at 0x81104000 to module 'led_modul_Fritz_Box_HW196' (0xdb2000 bytes left) [ 8.060000] [LED] use GPIO 32 for 'gpio_avm_led_power' [ 8.070000] [LED] use GPIO 38 for 'gpio_avm_led_internet' [ 8.070000] [LED] use GPIO 35 for 'gpio_avm_led_festnetz' [ 8.080000] [LED] use GPIO 36 for 'gpio_avm_led_wlan' [ 8.080000] [LED] use GPIO 47 for 'gpio_avm_led_info' [ 8.090000] [LED] use GPIO 34 for 'gpio_avm_led_info_red' [ 8.090000] [BUTTON] use GPIO 29 for 'gpio_avm_button_wlan' [ 8.100000] [BUTTON] use GPIO 1 for 'gpio_avm_button_dect' [ 8.110000] AVM_WATCHDOG: System Init UEberwachung 240 Sekunden [ 8.770000] [module-alloc-by-name] give 0x3000 bytes at 0x81121000 to module 'rtc_avm' (0xdaf000 bytes left) [ 8.780000] rtc-avm rtc-avm.0: rtc core: registered avm as rtc0 [ 8.790000] [avm-rtc]: avm_rtc_probe: register: ret=0x87681800 [ 8.790000] [avm-rtc]: avm_rtc_probe: success [ 9.010000] [ 9.010000] [avm_debug] redirecting kernel-messages (/dev/debug)

[ 0.000000] Linux version 5.4.48 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13672-263f7e5bbd)) #0 SMP Tue Jun 30 22:21:10 2020 [ 0.000000] SoC: xRX200 rev 1.2 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc) [ 0.000000] MIPS: machine is AVM FRITZ!Box 7360 V2 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Detected 1 available secondary CPU(s) [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] percpu: Embedded 14 pages/cpu s26192 r8192 d22960 u57344 [ 0.000000] pcpu-alloc: s26192 r8192 d22960 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyLTQ0,115200 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=0000a610 [ 0.000000] Readback ErrCtl register=0000a610 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 120336K/131072K available (6039K kernel code, 216K rwdata, 1564K rodata, 1252K init, 222K bss, 10736K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x33c/0x554 with crng_init=0 [ 0.000000] CPU Clock: 500MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns [ 0.000011] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns [ 0.007905] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088) [ 0.045993] pid_max: default: 32768 minimum: 301 [ 0.050938] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.058133] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.069499] rcu: Hierarchical SRCU implementation. [ 0.075046] smp: Bringing up secondary CPUs ... [ 0.080760] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.080778] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.080877] CPU1 revision is: 00019556 (MIPS 34Kc) [ 0.111719] Synchronize counters for CPU 1: done. [ 0.136096] smp: Brought up 1 node, 2 CPUs [ 0.146312] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.155972] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.163123] pinctrl core: initialized pinctrl subsystem [ 0.171240] NET: Registered protocol family 16 [ 0.189884] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV [ 0.203678] pinctrl-xway 1e100b10.pinmux: Init done [ 0.210205] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28 [ 0.221910] pcie-xrx200 1d900000.pcie: failed to get the PCIe PHY [ 0.270926] usbcore: registered new interface driver usbfs [ 0.276559] usbcore: registered new interface driver hub [ 0.282039] usbcore: registered new device driver usb [ 0.290853] clocksource: Switched to clocksource MIPS [ 0.298625] NET: Registered protocol family 2 [ 0.304514] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.312922] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.320528] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.327631] TCP: Hash tables configured (established 1024 bind 1024) [ 0.334244] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.340707] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.348047] NET: Registered protocol family 1 [ 0.352397] PCI: CLS 0 bytes, default 32 [ 0.357184] gptu: totally 6 16-bit timers/counters [ 0.362031] gptu: misc_register on minor 63 [ 0.366192] gptu: succeeded to request irq 126 [ 0.370714] gptu: succeeded to request irq 127 [ 0.375198] gptu: succeeded to request irq 128 [ 0.379724] gptu: succeeded to request irq 129 [ 0.384231] gptu: succeeded to request irq 130 [ 0.388753] gptu: succeeded to request irq 131 [ 0.390878] random: fast init done [ 0.393801] No VPEs reserved for AP/SP, not initialize VPE loader [ 0.393801] Pass maxvpes=<n> argument as kernel argument [ 0.408203] No TCs reserved for AP/SP, not initializing RTLX. [ 0.408203] Pass maxtcs=<n> argument as kernel argument [ 0.421813] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.447488] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.453266] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.476488] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc [ 0.485415] printk: console [ttyLTQ0] enabled [ 0.494141] printk: bootconsole [early0] disabled [ 0.506327] lantiq nor flash device: 02000000 at 10000000 [ 0.510549] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e [ 0.519974] Amd/Fujitsu Extended Query Table at 0x0040 [ 0.525057] Amd/Fujitsu Extended Query version 1.3. [ 0.530090] number of CFI chips: 1 [ 0.533540] 4 fixed-partitions partitions found on MTD device ltq_nor [ 0.539930] Creating 4 MTD partitions on "ltq_nor": [ 0.544792] 0x000000000000-0x000000020000 : "urlader" [ 0.552219] 0x000000020000-0x000001f80000 : "firmware" [ 0.593685] 2 eva-fw partitions found on MTD device firmware [ 0.597947] 0x000000020000-0x00000028ecc0 : "kernel" [ 0.605160] 0x000000290100-0x000001f80000 : "rootfs" [ 0.610917] mtd: device 3 (rootfs) set to be root filesystem [ 0.615233] 1 squashfs-split partitions found on MTD device rootfs [ 0.621382] 0x0000005c0000-0x000001f80000 : "rootfs_data" [ 0.629040] 0x000001f80000-0x000001fc0000 : "tffs (1)" [ 0.635174] 0x000001fc0000-0x000002000000 : "tffs (2)" [ 0.644472] libphy: Fixed MDIO Bus: probed [ 0.658093] NET: Registered protocol family 10 [ 0.666937] Segment Routing with IPv6 [ 0.669318] NET: Registered protocol family 17 [ 0.673786] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.686623] 8021q: 802.1Q VLAN Support v1.8 [ 0.696612] pcie-xrx200 1d900000.pcie: failed to get the PCIe PHY [ 0.809711] libphy: lantiq,xrx200-mdio: probed [ 0.819085] Atheros 8030 ethernet 0:00: attached PHY driver [Atheros 8030 ethernet] (mii_bus:phy_addr=0:00, irq=POLL) [ 0.828611] Atheros 8030 ethernet 0:01: attached PHY driver [Atheros 8030 ethernet] (mii_bus:phy_addr=0:01, irq=POLL) [ 0.839603] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=POLL) [ 0.853310] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=POLL) [ 0.991940] PCI host bridge /fpi@10000000/pcie@d900000 ranges: [ 0.996628] PCI host bridge to bus 0000:00 [ 1.000489] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff] [ 1.007360] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff] [ 1.014212] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 1.021003] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.028978] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060000 [ 1.034943] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge [ 1.052747] pci 0000:00:00.0: ifx_pcie_rc_class_early_fixup+0x0/0x7c took 17360 usecs [ 1.059292] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.067768] pci 0000:01:00.0: [168c:002e] type 00 class 0x028000 [ 1.072475] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] [ 1.079377] pci 0000:01:00.0: supports D1 [ 1.083160] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 1.091673] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.096924] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 1.103550] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff] [ 1.110307] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c00ffff 64bit] [ 1.117631] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.122586] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff] [ 1.129514] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1 [ 1.135974] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned [ 1.142243] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 1.157570] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 1.165154] Freeing unused kernel memory: 1252K [ 1.168294] This architecture does not have kernel memory protection. [ 1.174731] Run /sbin/init as init process [ 1.970113] init: Console is alive [ 1.972560] init: - watchdog - [ 3.463826] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.620390] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found, using dummy regulator [ 3.627532] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found, using dummy regulator [ 3.737338] dwc2 1e101000.usb: DWC OTG Controller [ 3.740756] dwc2 1e101000.usb: new USB bus registered, assigned bus number 1 [ 3.747766] dwc2 1e101000.usb: irq 62, io mem 0x1e101000 [ 3.754454] hub 1-0:1.0: USB hub found [ 3.757034] hub 1-0:1.0: 1 port detected [ 3.762250] dwc2 1e106000.usb: 1e106000.usb supply vusb_d not found, using dummy regulator [ 3.769453] dwc2 1e106000.usb: 1e106000.usb supply vusb_a not found, using dummy regulator [ 3.879152] dwc2 1e106000.usb: DWC OTG Controller [ 3.882449] dwc2 1e106000.usb: new USB bus registered, assigned bus number 2 [ 3.889561] dwc2 1e106000.usb: irq 91, io mem 0x1e106000 [ 3.896292] hub 2-0:1.0: USB hub found [ 3.898784] hub 2-0:1.0: 1 port detected [ 3.905361] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.914273] init: - preinit - [ 5.015760] random: procd: uninitialized urandom read (4 bytes read) [ 9.268155] jffs2: notice: (554) jffs2_build_xattr_subsystem: complete building xattr subsystem, 22 of xdatum (0 unchecked, 22 orphan) and 27 of xref (3 dead, 24 orphan) found. [ 9.284753] mount_root: overlay filesystem has not been fully initialized yet [ 9.291610] mount_root: switching to jffs2 overlay [ 9.327208] overlayfs: upper fs does not support tmpfile. [ 9.337067] urandom-seed: Seed file not found (/etc/urandom.seed) [ 9.574654] procd: - early - [ 9.576442] procd: - watchdog - [ 10.240238] procd: - watchdog - [ 10.242576] procd: - ubus - [ 10.324778] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.331035] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.336723] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.345001] procd: - init - [ 11.539676] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.550424] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH [ 11.563648] NET: Registered protocol family 8 [ 11.566595] NET: Registered protocol family 20 [ 11.584433] PPP generic driver version 2.4.2 [ 11.644057] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG [ 11.665729] [ 11.665729] [ 11.665729] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6 [ 11.683409] [ 11.683409] Predefined debug level: 3 [ 11.701415] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056 [ 11.707716] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb [ 11.732843] Infineon Technologies DEU driver version 2.0.0 [ 11.741769] IFX DEU DES initialized (multiblock). [ 11.748020] IFX DEU AES initialized (multiblock). [ 11.752475] IFX DEU ARC4 initialized (multiblock). [ 11.756715] IFX DEU SHA1 initialized. [ 11.760520] IFX DEU MD5 initialized. [ 11.763937] IFX DEU SHA1_HMAC initialized. [ 11.768099] IFX DEU MD5_HMAC initialized. [ 11.792005] NET: Registered protocol family 24 [ 11.820680] xt_time: kernel timezone is -0000 [ 12.034259] urngd: v1.0.2 started. [ 12.060197] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1 [ 12.065485] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned [ 12.071754] ath9k 0000:01:00.0: enabling device (0000 -> 0002) [ 12.079724] ath9k 0000:01:00.0: Direct firmware load for ath9k-eeprom-pci-0000:01:00.0.bin failed with error -2 [ 12.088551] ath9k 0000:01:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:01:00.0.bin [ 12.455840] random: crng init done [ 12.457823] random: 6 urandom warning(s) missed due to ratelimiting [ 12.937118] ath: EEPROM regdomain: 0x8114 [ 12.937136] ath: EEPROM indicates we should expect a country code [ 12.937149] ath: doing EEPROM country->regdmn map search [ 12.937160] ath: country maps to regdmn code: 0x37 [ 12.937172] ath: Country alpha2 being used: DE [ 12.937181] ath: Regpair used: 0x37 [ 12.956095] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 12.961462] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xbc000000, irq=144 [ 12.976166] kmodloader: done loading kernel modules from /etc/modules.d/* [ 73.221700] br-lan: port 1(eth0.1) entered blocking state [ 73.225881] br-lan: port 1(eth0.1) entered disabled state [ 73.231985] device eth0.1 entered promiscuous mode [ 73.235961] device eth0 entered promiscuous mode [ 1065.447020] lantiq,xrx200-net 1e108000.eth eth0: port 2 got link [ 1065.451708] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1065.460482] br-lan: port 1(eth0.1) entered blocking state [ 1065.464516] br-lan: port 1(eth0.1) entered forwarding state [ 1065.472033] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready BusyBox v1.31.1 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt SNAPSHOT, r13672-263f7e5bbd ----------------------------------------------------- root@OpenWrt:~# iw list Wiphy phy0 max # scan SSIDs: 4 max scan IEs length: 2257 bytes max # sched scan SSIDs: 0 max # match sets: 0 max # scan plans: 1 max scan plan interval: -1 max scan plan iterations: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports AP-side u-APSD. Device supports T-DLS. Available Antennas: TX 0x3 RX 0x3 Configured Antennas: TX 0x3 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * mesh point * P2P-client * P2P-GO * outside context of a BSS Band 1: Capabilities: 0x11ee HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) * 2472 MHz [13] (20.0 dBm) * 2484 MHz [14] (disabled) valid interface combinations: * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1, total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz } HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Supported extended features: * [ RRM ]: RRM * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling root@OpenWrt:~# cat /proc/mtd dev: size erasesize name mtd0: 00020000 00020000 "urlader" mtd1: 01f60000 00020000 "firmware" mtd2: 0026ecc0 00020000 "kernel" mtd3: 01ceff00 00020000 "rootfs" mtd4: 019c0000 00020000 "rootfs_data" mtd5: 00040000 00020000 "tffs (1)" mtd6: 00040000 00020000 "tffs (2)" root@OpenWrt:~#