User Tools

Site Tools


toh:avm:avm_fritz_box_7320

AVM FRITZ!Box 7320

A Lantiq AR9 based 802.11bgn ADSL2+ CPE with DECT and connectors for analog phones as well as 2 USB 2.0 ports.

Has equal hardware like AVM Fritz!Box 7330 (SL) - same firmware can be used.

OEM source code available at: UNAVAILABLE (likely a GPL violation)

Supported Versions

Status

Not tested - should work due equal hardware, see: AVM Fritz!Box 7330 (SL)

Hardware Highlights

ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
FRITZ!Box Fon WLAN 7320Lantiq PSB508123931664Atheros AR9227b/g/n--2ADSL2+ Annex B2x 2.0

Installation

Backup Firmware

Serial & TFTP

  • get a TFTP Server, e.g. tftpgui version 2.2 - version 3.1 (did not work on Ubuntu 16.10, April2017) and required packages: sudo apt-get install python python-tk
  • set PC-Lan-IP to: 192.168.178.3, Sub: 255.255.255.0, Gateway: 192.168.178.1
  • start tftpgui: sudo python tftpgui.py
  • start serial terminal, e.g.: sudo screen /dev/ttyUSB0 115200
  • power on FritzBox and wait till boot finished
  • press Enter to activate BusyBox console:
    cat /proc/mtd
    cat /dev/mtdblock0 | tftp -p -l - -r rootfs.image 192.168.178.3
    cat /dev/mtdblock1 | tftp -p -l - -r kernel.image 192.168.178.3
    cat /dev/mtdblock2 | tftp -p -l - -r urlader.image 192.168.178.3
    cat /dev/mtdblock3 | tftp -p -l - -r tffs1.image 192.168.178.3
    cat /dev/mtdblock4 | tftp -p -l - -r tffs2.image 192.168.178.3
    cat /dev/mtdblock5 | tftp -p -l - -r jffs2.image 192.168.178.3
    cat /dev/mtdblock6 | tftp -p -l - -r mtd_nor.image 192.168.178.3
  • images should be in ../tftpgui/tftproot

Flash Firmware

Web Interface

Default IP: 192.168.178.1 (OEM Firmware), 192.168.1.1 (LEDE, OpenWrt)

Emergency OEM IP: Box is always available on http://169.254.1.1. Set PC IP-address manually in range of 169.254.1.x

If a default password is set try: 0000

FTP

connection to FritzBox: Lan, Serial (optional)

Use FTP if Web Interface is unreachable or image is not accepted. Flashing a non fitting image causes Box not to boot. Flash back firmware backup or stock kernel.image via FTP helps.

It is possible to do a “blind flash” without Serial connected. Flashing back Bootloader not tested & recommended (watch out for mtd2).

  • set PC-Lan-IP to: 192.168.178.3, Sub: 255.255.255.0, Gateway: 192.168.178.1
  • start serial terminal
  • power on FritzBox → interrupt boot immediately pressing a key in serial terminal, then start FTP connection
  • OR power on FritzBox → immediately start FTP connection (did not work - try again connecting a bit later), first 5seconds it accepts ftp connections - ping 192.168.178.1 for 5sec can help
ftp 192.168.178.1
User: adam2
Pwd: adam2
bin
passiv
quote MEDIA FLSH
put firmware.image mtd1
quote REBOOT
quit

Important: while flashing wait for ftp promt showing up again (“blind flash”) or watch in serial terminal: erase mtd1 …. flash …..

(optional) erase configuration partition mtd3 & mtd4 @serial terimal:

erase mtd3
erase mtd4
restart

Debricking

not tested

→ get stock firmware → rename it to .tar → find and extract kernel.image → flash kernel.image

→ bootloop of a faulty device → build a minimal firmware.image:

  • make menuconfig
  • check everything @ “Removal patches” except “Remove WLAN
  • @ “Other patches” disable all “AVM daemons”
  • rename firmware.image to .tar → find and extract kernel.image → flash kernel.image

generic.debrick

Hardware

Info

Instruction set MIPS
Vendor Lantiq
bootloader ADAM2
System-On-Chip Lantiq AR9 rev 1.2
CPU @Frq MIPS 34Kc V4.12 @393MHz
Flash size 16384 KiB
Flash Chip MACRONIX NOR
RAM size 64 MiB
RAM Chip ?
Wireless No1 distinct Chip: QCA AR9227-BC2A w/ 2×2 MIMO for 2.4GHz 802.11b/g/n
Modem ADSL2+
USB Yes 2 x 2.0
Serial Yes
JTAG Yes

Photos

Main PCB

Serial

port.serial, 115200,n,8,1

The Fritz!Box 7330 SL got a 3.3V TTL level serial port giving you bootloader and Linux console access.

JTAG

port.jtag

This looks like an EJTAG connector (untested)

Bootlogs

OEM bootlog

ROM VER: 1.1.3 CFG 01 [-] (AVM) EVA Revision: 1.1273 Version: 2273 (C) Copyright 2005 AVM Date: Sep 9 2011 Time: 16:53:17 (0) 2 0x0-0x341D [FLASH:] MACRONIX Uniform-Flash 16MB 64 Bytes WriteBuffer [FLASH:](Eraseregion [0] 128 sectors a 128kB) [SYSTEM:] AR9 on 393MHz/393MHz/196MHz Atheros 8030/35 detected Atheros 8030/35 detected Eva_AVM >help Commands Description -------- ----------- help help dm dump mem 32 Bit <addr> <range> cm change mem 32 Bit <addr> <value> dh dump mem 16 Bit <addr> <range> ch change mem 16 Bit <addr> <value> db dump mem 8 Bit <addr> <range> cb change mem 8 Bit <addr> <value> erase Erase Flash <mtd> printenv print Env. Variables restart reboot Device setenv set Env. variable <var> <value> unsetenv unset Env. variable <var> go load & start kernel from mtd1 setmac set mac addresses <addr> (like 12:23:40) mdio-read read 16-Bit mdio value mdio-write write 16-Bit mdio value eth-status eth Status Eva_AVM >printenv HWRevision 188 HWSubRevision 2 ProductID Fritz_Box_HW188 SerialNumber 0000000000000000 annex B autoload yes bootloaderVersion 1.1273 bootserport tty0 cpufrequency 393219000 firstfreeaddress 0x810CC40C firmware_info 116.06.03 firmware_version 1und1 flashsize nor_size=16MB jffs2_size 16 maca 9C:C7:A6:XX:XX:XX macb 9C:C7:A6:XX:XX:XX macwlan 9C:C7:A6:XX:XX:XX macdsl 9C:C7:A6:XX:XX:XX memsize 0x04000000 modetty0 38400,n,8,1,hw modetty1 38400,n,8,1,hw modulemem 5002304 mtd1 0x90020000,0x90F80000 mtd2 0x90000000,0x90020000 mtd3 0x90F80000,0x90FC0000 mtd4 0x90FC0000,0x91000000 my_ipaddress 192.168.178.1 prompt Eva_AVM req_fullrate_freq 393219000 sysfrequency 393219000 urlader-version 2273 usb_board_mac 9C:C7:A6:XX:XX:XX usb_device_id 0x0000 usb_device_name USB DSL Device usb_manufacturer_name AVM usb_revision_id 0x0000 usb_rndis_mac 9C:C7:A6:XX:XX:XX wlan_key XXXXXXXXXXXXXXXXXXXX Eva_AVM >go ........................... Lantiq xDSL CPE AR9 [ 0.000000] Linux version 2.6.32.60 (hjortmann@EmbeddedVM) (gcc version 4.6.3 (Buildroot 2011.11) ) #3 Thu Dec 5 14:42:47 CET 2013 [ 0.000000] phym = 04000000, mem = 04000000, max_pfn = 00004000 [ 0.000000] Reserving memory for CP1 @0xa4000000, size 0x00000000 [ 0.000000] wlan_mem_start = 0x03f9e000 [ 0.000000] [init_avm_kernel_config] AVM Kernel Config (ptr 804d2000) [ 0.000000] [init_avm_kernel_config] AVM Kernel Config: module memory entry [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 0001954c (MIPS 34Kc) [ 0.000000] Determined physical RAM map: [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00003f9e [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00003f9e [ 0.000000] [c55] c55_mem_start = 0xfc0000 [ 0.000000] [module-alloc-by-name] 'modulemem' not in use, use AVM Kernel Config (7192576 bytes, reserved for module mem) [ 0.000000] [module-alloc] use 0x6dc000 bytes at 0x81081000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16158 [ 0.000000] Kernel command line: console=ttyS1,115200n8r nor_size=16MB ethaddr=9C:C7:A6:XX:XX:XX [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] [avm_cache_set_coherency]: setting cache coherency for HWRevision=188 to write through [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=0005036c [ 0.000000] Readback ErrCtl register=0005036c [ 0.000000] Memory: 51752k/65144k available (3412k kernel code, 13324k reserved, 1519k data, 176k init, 0k highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:181 [ 0.000000] [mips_cpu_irq_init] irq_base 0 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.020000] Calibrating delay loop... 261.32 BogoMIPS (lpj=1306624) [ 0.230000] Security Framework initialized [ 0.230000] Mount-cache hash table entries: 512 [ 0.230000] kernel_init: started [ 0.240000] kernel_init: kernel locked [power_managment_setup] reset 'DSL, DFE, AFE, VOICE, DSLTC, ARC' [power_managment_setup] reset 'LDO' [power_managment_setup] power down 'PPE TC, PPE EMA, LEDC, DFEV1, DFEV0' [power_managment_setup] power down 'MSI1, PDI1 PCIE1 PCIE1_PHY' [power_managment_setup] disable power domain 'DSL + DFE' [ 0.270000] NET: Registered protocol family 16 [ 0.280000] Reboot Status: XXXXXXXXXXXXXXXXXXXXXXXXX [ 0.280000] XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [ 0.290000] Reboot Status is: Power-On [ 0.290000] [avmnet] [avmnet_cfg_init] Driver version: 6.106.1.2 - Revision 1496:2498 - Do 5.12.2013 14:42:21 [ 0.300000] Lantiq PCI host controller driver, version 1.2.0, (c) 2001-2011 Lantiq Deutschland GmbH [ 0.310000] bio: create slab <bio-0> at 0 [ 0.310000] pci 0000:00:00.0: PME# supported from D1 D2 [ 0.320000] pci 0000:00:00.0: PME# disabled [ 0.320000] NET: Registered protocol family 8 [ 0.320000] NET: Registered protocol family 20 [ 0.330000] NET: Registered protocol family 2 [ 0.330000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.340000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.340000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.350000] TCP: Hash tables configured (established 2048 bind 2048) [ 0.360000] TCP reno registered [ 0.360000] NET: Registered protocol family 1 [ 0.360000] IFX DMA driver, version ifxmips_dma_core.c:v1.0.17 [ 0.360000] ,(c)2009 Infineon Technologies AG [ 0.360000] skb_shared_size:344 [ 0.380000] I[avm_register_busmaster:125]: Registered busmaster device: AVM_DMA_BUSMASTER [ 0.380000] [bcu_control_interrupt] 'FPI Slave BCU0' Error Interrupt [ 0.380000] Slave BCU[sBCU_EADD]: Error Address Register: 0x17000004 [ 0.380000] Slave BCU[sBCU_EDAT]: Error Data Capture Register: 0x0290030f [ 0.380000] Slave BCU[sBCU_CON] : Control Register: 0x4009ffff [ 0.380000] Slave BCU[sBCU_ECON]: Error Register (0x21be0030): [ 0.380000] FPI Bus Operation Code 0x2 [ 0.380000] FPI Bus Tag Number 0x1 [ 0.380000] FPI Bus Read Signal: passive [ 0.380000] FPI Bus Write Signal: active [ 0.380000] FPI Bus Supervisor Mode: active [ 0.380000] FPI Bus Acknowladge Signal: 0x3 [ 0.380000] FPI Bus Abort: passive [ 0.380000] FPI Bus Ready: active [ 0.380000] FPI Bus Timeout: not pressed [ 0.380000] FPI Bus Error Counter: 48 [ 0.450000] [bcu_control_init] interrupts for BCU installed [ 0.460000] Lantiq CGU driver, version 1.1.32, (c) 2001-2011 Lantiq Deutschland GmbH [ 0.470000] clk-timing: timing:16, ram_refresh_timing:1524, base_ram_refresh_timing:7775 [ 0.480000] smvp_tc_init: tc 0 tcbind 00020000 tcstatus 18102000 [ 0.480000] smvp_tc_init: tc 1 tcbind 00200001 tcstatus 00000400 [ 0.480000] smvp_tc_init: tc 2 tcbind 00400001 tcstatus 00000400 [ 0.480000] smvp_tc_init: tc 3 tcbind 00600001 tcstatus 00000400 [ 0.480000] config3 0x424 MT 1 [ 0.480000] MVPControl 0x2, STLB 0 VPC 1 EVP 0 [ 0.480000] mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1 [ 0.510000] initcall 0x804d98fc returned with disabled interrupts [ 0.520000] audit: initializing netlink socket (disabled) [ 0.520000] type=2000 audit(0.000:1): initialized [ 0.530000] [simple_profiling] 0 entries 50 min [ 0.530000] squashfs: version 3.4 (2008/08/26) Phillip Lougher [ 0.540000] JFFS2 version 2.2 (NAND) (ZLIB) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.550000] fuse init (API version 7.13) [ 0.550000] msgmni has been set to 101 [ 0.560000] io scheduler noop registered (default) [ 0.560000] [avm_membench_init] [ 0.860000] avm_net_trace: Up and running. [ 0.860000] [loadcontrol] set auto - scale=1 [ 0.870000] [avm] configured: watchdog event debug [ 0.870000] [ 0.870000] AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Dec 5 2013 14:42:03) [ 0.880000] [simple-profiling]: 4 performance counters implemented, OLD_34K [ 0.890000] Enable Performance Counter 0 for Data cache load/stores (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable) [ 0.900000] Setup tcs=0x1 current_tc_mask=0x1, reg=0 [ 0.910000] [simple-profiling]: 4 performance counters implemented, OLD_34K [ 0.920000] Enable Performance Counter 1 for Data cache load/store misses (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable) [ 0.930000] Setup tcs=0x1 current_tc_mask=0x1, reg=1 [ 0.930000] [avm]: AVM Simple Profiling enabled. [ 0.940000] ifx_pmu_init: Major 245 [ 0.940000] Lantiq PMU driver, version 1.2.6, (c) 2001-2011 Lantiq Deutschland GmbH [ 0.950000] Lantiq GPIO driver, version 1.3.2, (c) 2001-2011 Lantiq Deutschland GmbH [ 0.960000] Infineon Technologies RCU driver version 1.0.7 [ 0.960000] ttyS0 at MMIO 0x1e100400 (irq = 100) is a PORT_IFX_ASC [ 0.970000] ttyS1 at MMIO 0x1e100c00 (irq = 107) is a PORT_IFX_ASC [ 0.980000] loop: module loaded [ 0.980000] nbd: registered device at major 43 [ 0.980000] [0]system-load 1 loadavg 0.0 0.0 0.0 - 13 tasks:0 % curr:swapper(0 %) max:swapper(0 %, pid:1), readytorun: 1, pgfault 0/s (max 0 avg 0.0) [ 1.020000] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 1.020000] Platform NOR MTD, (c) AVM 2010 [ 1.020000] [plat_nor_probe]start probe [ 1.030000] [do_map_probe] driver_name=cfi_probe [ 1.030000] mtd-nor: Found 1 x16 devices at 0x0 in 16-bit bank [ 1.040000] Amd/Fujitsu Extended Query Table at 0x0040 [ 1.040000] mtd-nor: CFI does not contain boot bank location. Assuming top. [ 1.050000] number of CFI chips: 1 [ 1.050000] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. [ 1.060000] [ifx_jffs2_parser_function] mtd_info->name mtd-nor mtd_info->index 0 param=0 p_mtd_pat=0x83a1a954 [ 1.070000] [ifx_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856) [ 1.080000] [ifx_jffs2_parser_function] magic 19852003 found @pos 0xe80000, size 1048576 [ 1.090000] [ifx_squashfs_parser_function] mtd_info->name mtd-nor mtd_info->index 0 param=0 p_mtd_pat=0x83a1a954 [ 1.120000] [ifx_squashfs_parser_function:320] pos: 0x17a900 | offs[0]: 0x17a900 | size[0]: 14702336 | offs[1]: 0x20000 | size[1]: 1419520 [ 1.130000] [ifx_squashfs_parser_function] magic found @pos 0x17a900 [ 1.130000] 6 find_squashfs partitions found on MTD device mtd-nor [ 1.140000] Creating 6 MTD partitions on "mtd-nor": [ 1.140000] 0x00000017a900-0x000000f80000 : "rootfs" [ 1.150000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 1.160000] {ifx_mtd_add_notifier} name rootfs [ 1.170000] 0x000000020000-0x00000017a900 : "kernel" [ 1.170000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 1.180000] {ifx_mtd_add_notifier} name kernel [ 1.190000] 0x000000000000-0x000000020000 : "urlader" [ 1.190000] {ifx_mtd_add_notifier} name urlader [ 1.200000] 0x000000f80000-0x000000fc0000 : "tffs (1)" [ 1.200000] {ifx_mtd_add_notifier} name tffs (1) [ 1.210000] 0x000000fc0000-0x000001000000 : "tffs (2)" [ 1.210000] {ifx_mtd_add_notifier} name tffs (2) [ 1.220000] 0x000000e80000-0x000000f80000 : "jffs2" [ 1.220000] {ifx_mtd_add_notifier} name jffs2 [ 1.230000] {ifx_mtd_add_notifier} name mtd-nor [ 1.230000] mtd-nor mtd-nor: registered mtd device [ 1.240000] Lantiq SSC driver, version 2.4.1, (c) 2001-2011 Lantiq Deutschland GmbH [ 1.240000] Unknown SPI device: 0xFF 0xFF 0xFF [ 1.250000] ifx_spi_flash_init: Found no serial flash device [ 1.250000] tun: Universal TUN/TAP device driver, 1.6 [ 1.260000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.270000] IFX SWITCH API, Version 1.1.8.5 [ 1.270000] SWAPI: Registered character device [switch_api] with major no [81] [ 1.380000] mice: PS/2 mouse device common for all mice [ 1.380000] i2c /dev entries driver [ 1.390000] CAPI Subsystem Rev 1.1.2.8 [ 1.390000] AVM PA 4.1.3 2013-11-18 [ 1.390000] AVM PA skb pktinfo at offset 128 size 192 [ 1.400000] [loadcontrol]module avm_pa registered [ 1.400000] IPv4 over IPv4 tunneling driver [ 1.410000] TCP cubic registered [ 1.410000] mcfw: IGMPv3 fast forwarding [ 1.410000] NET: Registered protocol family 10 [ 1.420000] IPv6 over IPv4 tunneling driver [ 1.420000] NET: Registered protocol family 17 [ 1.430000] NET: Registered protocol family 8 [ 1.430000] atmpvc_init() failed with -17 [ 1.430000] KOAM is loaded successfully. [ 1.440000] l2tp_core: L2TP core driver, V2.0 [ 1.440000] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 1.450000] l2tp_netlink: L2TP netlink interface [ 1.450000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 1.460000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 1.470000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0) [ 1.470000] mount on mtd3 and mtd4 (double buffering) [ 1.480000] Adam2 environment variables API installed. [ 1.480000] {avmnet_cfg_netinit} [ 1.490000] [avmnet] No config found for HWRev 188, HWSubRev 2, Profile-ID 0, trying base config for HWSubRev [ 1.500000] [avmnet] No config found for HWRev 188, HWSubRev 2, trying base config for HWRev [ 1.510000] {avmnet_mac_ar9_init} Init on module mac_ar9_0 called. [ 1.520000] {avmnet_mac_ar9_init} Init on module mac_ar9_1 called. [ 1.540000] [avmnet] [avmnet_mac_ar9_setup] IFX_AR9_ETH_CTL(0): 0x424001 [ 1.540000] [avmnet] [avmnet_mac_ar9_setup] mac_nr: 0, vlan_reg: 0x4070001 [ 1.670000] [avmnet] [avmnet_mac_ar9_setup] IFX_AR9_ETH_CTL(1): 0x424001 [ 1.680000] [avmnet] [avmnet_mac_ar9_setup] mac_nr: 1, vlan_reg: 0x4070001 [ 1.800000] [avm_pa_multiplexer_init] start [ 1.810000] [avm_pa_multiplexer_init] init complete [ 1.810000] [avm_pa_multiplexer_register_instance] [ 1.810000] add:0x802462d4 [ 1.810000] remove:0x802477dc [ 1.820000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth0): 9c:c7:a6:xx:xx:xx [ 1.830000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth1): 9c:c7:a6:xx:xx:xx [ 1.840000] kernel_init: basic setup done [ 1.850000] [squashfs] use lzma compression [ 1.850000] VFS: Mounted root (squashfs filesystem) readonly on device 31:0. [ 1.860000] Freeing unused kernel memory: 176k freed [ 1.910000] trying /sbin/init starting pid 113, tty '/dev/ttyS1': '/etc/init.d/rc.S' tar: removing leading '/' from member names source files in group 0 ... /etc/init.d/S00-signal /etc/init.d/S05-watchdog /etc/init.d/S09-rtc /etc/init.d/S01-head /etc/init.d/S08-tffs /etc/init.d/S02-led /etc/init.d/S09-config [ 2.900000] TFFS Name Table K [ 4.430000] [module-alloc-by-name] give 0x11000 bytes at 0x81081000 to module 'led_modul_Fritz_Box_HW188' (0x6cb000 bytes left) [ 4.440000] led_modul_Fritz_Box_HW188: module license ' [ 4.440000] (C) Copyright 2012 by AVM [ 4.440000] ' taints kernel. [ 4.450000] Disabling lock debugging due to kernel taint [ 4.480000] AVM_WATCHDOG: System Init UEberwachung 240 Sekunden mknod: /var/flash/ar7.cfg: File exists P-Defaults: do nothing [ 5.050000] [module-alloc-by-name] give 0x1000 bytes at 0x81092000 to module 'rtc_avm' (0x6ca000 bytes left) [ 5.070000] rtc-avm rtc-avm.0: rtc core: registered avm as rtc0 [ 5.070000] [avm-rtc]: avm_rtc_probe: register: ret=0x830bec00 [ 5.080000] [avm-rtc]: avm_rtc_probe: success exceute files in group 0 ... /etc/init.d/E05-basemodules group 0 done ... source files in group 1 ... /etc/init.d/S10-html /etc/init.d/S12-default /etc/init.d/S10-vm /etc/init.d/S15-filesys /etc/init.d/S11-config_def /etc/init.d/S17-capi /etc/init.d/S11-piglet /etc/init.d/S17-tam [ 5.320000] [ 5.320000] [avm_debug]redirect kernel-messages (/dev/debug) [ 5.380000] [module-alloc-by-name] give 0x8000 bytes at 0x81093000 to module 'Piglet_noemif' (0x6C2000 bytes left) [ 5.380000] [module-alloc-by-name] 0x8000 bytes used, 0xAB30 bytes expected [ 5.390000] [piglet]use default-settings (1 gpio from hw_config) [ 5.540000] patch_dectfw: C025D000, totallen = 45267(B0D3) [ 5.540000] patch_dectfw: patch_adress: A0 max_len: 26 with Version 2 Len: 17 [ 5.540000] patch_dectfw: dectmode 1 [ 5.540000] dect_loader: slow-bootmode <FE>* **************************************************************************************** [ 8.850000] dect144xx_file_process: upload of '/lib/modules/dectfw_secondlevel_441.hex' successfull [ 10.860000] [piglet]TDM: FS: 8005 Hz CLK: 1023980 Hz [jffs2] Mount /data success (mtd5 size 1048576) [jffs2] write env variable jffs2_size to 16 [ 11.850000] [0]system-load 6 loadavg 0.15 0.3 0.1 - 23 tasks:27 % curr:mtdblockd(10 %) max:init(11 %, pid:1), readytorun: 2, pgfault 2022/s (max 1 avg 1.0) [ramdisk] loop is loaded [ramdisk] ext2 is loaded [ramdisk] WARNING: Internal Memory Mountpoint '/var/media/ftp' already occupied - Listing content before deletion: /var/media/ftp: [ramdisk] WARNING: Internal Memory Mountpoint '/var/media/ftp' already occupied - deleting... next free loop devive: /dev/loop0 [ramdisk] Internal Memory: loopdevice @ 0 [ramdisk] Internal Memory: mountpoint @ /var/media/ftp [ramdisk] Internal Memory assigned @ /var/media/ftp [ 12.290000] [module-alloc-by-name] give 0x5D000 bytes at 0x8109B000 to module 'pcmlink' (0x665000 bytes left) [ 12.290000] [module-alloc-by-name] 0x5D000 bytes used, 0x65E18 bytes expected [pcmlink]svn: 1922 [ 12.410000] [pcmlink]VPE-Interface: base 0xFC0000, maxsize 131072, host-irq 142 [ 12.930000] [module-alloc-by-name] give 0xB2000 bytes at 0x810F8000 to module 'isdn_fbox_fon5' (0x5B3000 bytes left) [ 12.930000] [module-alloc-by-name] 0xB2000 bytes used, 0xC7608 bytes expected [ 13.020000] [isdn]svn:3066 [ 13.020000] driver params overwritten io_addr=0x0 irq_num=0 [ 13.020000] [pcmlink]chrony-support [ 13.020000] VPE loader: loading segment 1 to 80FC0000 (14000 bytes) elf loaded [ 13.020000] vpe_run: tc 1 start-addr 80FC0000 [ 13.020000] vpe_run: tc 1 tcstatus 18002000 tcbind 00200001 MVPCONTROL 00000002 vpeopt 00000000 [ 14.030000] PCMLINK: Version 7.498 Codecslots=6 Slics=1 Pots=1 TE=0 NT=0 DECT=4 (IA3222) no HwCross DSP-EC: 2 [ 14.500000] [module-alloc-by-name] give 0x54000 bytes at 0x811AA000 to module 'capi_codec' (0x55F000 bytes left) [ 14.500000] [module-alloc-by-name] 0x54000 bytes used, 0x5DA80 bytes expected capicodec_init() [capi_codec] support fax [capi_codec] support Codecs [ 14.730000] [module-alloc-by-name] give 0x35000 bytes at 0x811FE000 to module 'avm_dect' (0x52A000 bytes left) [ 14.730000] [module-alloc-by-name] 0x35000 bytes used, 0x3D3EC bytes expected [ 14.750000] [DECTDRV_ERR] avm_dect driver init [ 14.750000] [DECTDRV_ERR] [avm_dect]avm_dect_thread: start [ 14.760000] [module-alloc-by-name] give 0x3000 bytes at 0x81233000 to module 'dect_io' (0x527000 bytes left) [ 14.760000] [module-alloc-by-name] 0x3000 bytes used, 0x454C bytes expected [ 14.800000] dect_uicp_from_dect, ignore 8 bytes, dect_manager not up: 2F 7B TAM: create JFFS2 directory /data/tam exceute files in group 1 ... /etc/init.d/E15-device mknod led c 242 mknod tffs c 243 mknod avm_power c 252 mknod debug c 248 mknod avm_event c 249 mknod capi_oslib c 68 mknod dect_io c 227 / group 1 done ... source files in group 2 ... /etc/init.d/S21-udev exceute files in group 2 ... group 2 done ... source files in group 3 ... /etc/init.d/S30-ledcfg exceute files in group 3 ... group 3 done ... source files in group 4 ... /etc/init.d/S40-swap /etc/init.d/S44-hostname /etc/init.d/S48-configd /etc/init.d/S42-ptest /etc/init.d/S46-usb Jan 1 01:00:14 udevd[392]: specified group 'tty' unknown Jan 1 01:00:14 udevd[392]: specified group 'dialout' unknown Jan 1 01:00:14 udevd[392]: specified group 'kmem' unknown Jan 1 01:00:14 udevd[392]: specified group 'video' unknown Jan 1 01:00:14 udevd[392]: specified group 'audio' unknown Jan 1 01:00:14 udevd[392]: specified group 'lp' unknown Jan 1 01:00:14 udevd[392]: specified group 'disk' unknown Jan 1 01:00:14 udevd[392]: specified group 'floppy' unknown Jan 1 01:00:14 udevd[392]: specified group 'cdrom' unknown [ 15.330000] [module-alloc-by-name] give 0x1000 bytes at 0x81236000 to module 'lzo_compress' (0x526000 bytes left) [ 15.330000] [module-alloc-by-name] 0x1000 bytes used, 0x1888 bytes expected [ 15.330000] [module-alloc-by-name] give 0x1000 bytes at 0x81237000 to module 'lzo_decompress' (0x525000 bytes left) [ 15.330000] [module-alloc-by-name] 0x1000 bytes used, 0x1908 bytes expected Jan 1 01:00:15 udevd[392]: specified group 'tape' unknown [ 15.420000] [module-alloc-by-name] give 0x4000 bytes at 0x81238000 to module 'ramzswap' (0x521000 bytes left) [ 15.420000] [module-alloc-by-name] 0x4000 bytes used, 0x5F00 bytes expected [ 15.470000] ramzswap: /dev/ramzswap0 initialized: disksize_kb=8192 [ 15.550000] Adding 8184k swap on /dev/ramzswap0. Priority:-1 extents:1 across:8184k SS [ 16.260000] [module-alloc-by-name] give 0x1E000 bytes at 0x8123C000 to module 'usbcore' (0x503000 bytes left) [ 16.260000] [module-alloc-by-name] 0x1E000 bytes used, 0x25614 bytes expected [ 16.380000] usbcore: registered new interface driver usbfs [ 16.380000] usbcore: registered new interface driver hub [ 16.380000] usbcore: registered new device driver usb [ 16.520000] [module-alloc-by-name] give 0x14000 bytes at 0x8125A000 to module 'ifxusb_host' (0x4EF000 bytes left) [ 16.520000] [module-alloc-by-name] 0x14000 bytes used, 0x1A978 bytes expected [ 16.540000] IFXUSB: ifxusb_hcd: version 3.0alpha B100312 [ 17.950000] IFXUSB: USB core #0 soft-reset [ 18.160000] IFXUSB: USB core #0 soft-reset [ 18.160000] ifxusb_hcd ifxusb_hcd: IFX USB Controller [ 18.160000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1 [ 18.160000] ifxusb_hcd ifxusb_hcd: irq 56, io mem 0xbe101000 [ 18.160000] IFXUSB: Init: Power Port (0) [ 18.240000] usb usb1: configuration #1 chosen from 1 choice [ 18.480000] hub 1-0:1.0: USB hub found [ 18.480000] hub 1-0:1.0: 1 port detected [ 18.480000] avm_net_trace: New net trace device 'usb1' registered with minor 161. [ 19.840000] IFXUSB: USB core #1 soft-reset [ 20.040000] IFXUSB: USB core #1 soft-reset [ 20.040000] ifxusb_hcd ifxusb_hcd: IFX USB Controller [ 20.040000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 2 [ 20.040000] ifxusb_hcd ifxusb_hcd: irq 85, io mem 0xbe106000 [ 20.040000] IFXUSB: Init: Power Port (0) [ 20.050000] dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: F6 14 [ 20.100000] usb usb2: configuration #1 chosen from 1 choice [ 20.270000] hub 2-0:1.0: USB hub found [ 20.270000] hub 2-0:1.0: 1 port detected [ 20.270000] avm_net_trace: New net trace device 'usb2' registered with minor 162. IFXUSB HOST started [ 22.010000] [0]system-load 9 loadavg 1.8 0.23 0.7 - 75 tasks:17 % curr:udevd(0 %) max:mtdblockd(6 %, pid:86), readytorun: 12, pgfault 3690/s (max 2 avg 1.0) exceute files in group 4 ... /etc/init.d/E40-dsl /etc/init.d/E46-net /etc/init.d/E47-voip [ 23.930000] dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: F6 14 [ 23.990000] DSP: XDU=1( D1 ) OVR=0 MIPS_OVR=0 [dsl get xtse] ANNEX=B [dsl get xtse] setting Annex B and J [dsl get xtse] 10 00 10 40 00 04 01 00 [dsl sus] starting ar9 dsp... [dsl sus] ANNEX=B DIAGNOSE=no [ 24.550000] [module-alloc-by-name] give 0x9000 bytes at 0x8126E000 to module 'ifxmips_mei' (0x4E6000 bytes left) [ 24.550000] [module-alloc-by-name] 0x9000 bytes used, 0xBCAC bytes expected [dsl mei] Lantiq MEI driver version: 5.03.00 [dsl mei] Lantiq MEI driver global debug_level: 0 [dsl sus] loaded ar9 mei driver: ifxmips_mei.ko with params: [ 24.820000] [module-alloc-by-name] give 0x4C000 bytes at 0x81277000 to module 'drv_dsl_cpe_api' (0x49A000 bytes left) [ 24.820000] [module-alloc-by-name] 0x4C000 bytes used, 0x559A0 bytes expected [dsl drv] Lantiq CPE API Driver version: DSL CPE API V4.9.2.1 [dsl drv] Predefined debug level: 4 [dsl drv] dynamically registered major number 239 for drv_dsl_cpe_api [dsl sus] loaded ar9 dsl driver: drv_dsl_cpe_api.ko with params: [dsl sus] created ar9 dsl device node /dev/dsl_ar9 (major: 239 , minor: 0) [dsl sus] created ar9 mei device node /dev/ifx_mei (major: 105 , minor: 0) [dsl sus] started dsl_control (configuration: -i10_00_10_40_00_04_01_00 -f/lib/modules/dsp_ar9/ar9-B-dsl.bin -n/etc/dsl/notify/dsl_notify.sh ) nohup: appending output to nohup.out 0 [dsl sus] started dsl_monitor [dsl sus] ....ar9 dsp started [ 26.900000] [module-alloc-by-name] give 0x11E000 bytes at 0x812C3000 to module 'kdsldmod' (0x37C000 bytes left) [ 26.900000] [module-alloc-by-name] 0x11E000 bytes used, 0x14A6A4 bytes expected [ 27.010000] kdsldmod: init start (Feb 7 2014 15:25:04) sizeof(struct sk_buff)=440 [ 27.020000] userman: device registerd (userman_url) with major=233 <6>kdsld: ttychannel: ldisc 8 registered [ 27.020000] kdsldmod: init done Jan 1 01:00:27 l2tpv3d[965]: starting. Jan 1 01:00:27 l2tpv3d[965]: verbose: DISABLED [ 28.910000] dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: F6 14 [ 30.690000] ADDRCONF(NETDEV_UP): lan: link is not ready [ 31.210000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.210000] device eth0 entered promiscuous mode [avm_power] eth: port 0 force normal CON t0 [avm_power] eth: port 1 force throttle CON t0 [avm_power] eth: port 2 force throttle CON t0 [ 31.840000] [avmnet] [avmnet_power_config] tried to set mode for port 2 [ 31.840000] [avm_power] : ethernet switch failed [avm_power] eth: port 3 force throttle CON t0 [ 31.840000] [avmnet] [avmnet_power_config] tried to set mode for port 3 [ 31.840000] [avm_power] : ethernet switch failed [ 32.040000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 32.050000] device eth1 entered promiscuous mode [ 32.050000] ADDRCONF(NETDEV_UP): guest: link is not ready Jan 1 01:00:31 multid[986]: DHCPD on lan:0 skipped, is virtual interface rc.wlan: Start WLAN... [ 32.710000] [0]system-load 100 % loadavg 1.22 0.29 0.9 - 64 tasks:40 % curr:ctlmgr(14 %) max:ctlmgr(14 %, pid:973), readytorun: 6, pgfault 4143/s (max 3 avg 1.0) WLAND:[01007]:01:00.32:Build = Dec 5 2013 14:33:42 Jan 1 01:00:33 dsld[1011]: set vdsl_resalearch Jan 1 01:00:33 dsld[1011]: startup ($Revision: 1.95 $$CompileDate: Feb 7 2014 15:23:27 $) Jan 1 01:00:33 dsld[1011]: set_preconfig1 Jan 1 01:00:33 dsld[1011]: sync_group in ar7.cfg: Jan 1 01:00:33 dsld[1011]: sync_group:sync_dsl(enabled=1), nr=0 Jan 1 01:00:33 dsld[1011]: vcc:1/32 Jan 1 01:00:33 dsld[1011]: dsliface:internet Jan 1 01:00:33 dsld[1011]: dsliface:voip Jan 1 01:00:33 dsld[1011]: sync_group: dsl Jan 1 01:00:33 dsld[1011]: sync_dsl is igd_device Jan 1 01:00:33 dsld[1011]: set_preconfig2 Jan 1 01:00:33 dsld[1011]: add_vcc_connection: dsl Jan 1 01:00:33 dsld[1016]: DSL Mac 9c:c7:a6:xx:xx:xx Jan 1 01:00:33 dsld[1016]: VOIP Mac 9c:c7:a6:xx:xx:xx Jan 1 01:00:33 dsld[1016]: VCC2 Mac 9c:c7:a6:xx:xx:xx Jan 1 01:00:33 dsld[1016]: VCC3 Mac 9c:c7:a6:xx:xx:xx <3>kdsld: kdsld_vcc_preunregister: * [ 33.890000] dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: F6 14 Jan 1 01:00:33 dsld[1016]: voip: ppptarget voip disabled, ignored Jan 1 01:00:33 dsld[1016]: sync_group(prepare_interfaces): dsl: inet_nr=0 Jan 1 01:00:33 dsld[1016]: nach prepare_interfaces: dsld.dsliface_default_inet_nr=0, dsld.dsliface_voip_nr=-1 Jan 1 01:00:33 dsld[1016]: get_queueindex: none: not found Jan 1 01:00:33 dsld[1016]: get_queueindex: none: not found Jan 1 01:00:33 dsld[1016]: queue 0: prio 0 weight 0 shrate 0 shburst 0 wan Jan 1 01:00:33 dsld[1016]: queue 1: prio 10 weight 0 shrate 0 shburst 0 wan Jan 1 01:00:33 dsld[1016]: queue 2: prio 20 weight 0 shrate 0 shburst 0 wan Jan 1 01:00:33 dsld[1016]: queue 3: prio 30 weight 0 shrate 0 shburst 0 wan Jan 1 01:00:33 dsld[1016]: queue 4: prio 100 weight 90 shrate 0 shburst 0 wan Jan 1 01:00:33 dsld[1016]: queue 5: prio 100 weight 10 shrate 0 shburst 0 wan Jan 1 01:00:33 dsld[1016]: queue 6: prio 200 weight 0 shrate 0 shburst 0 wan Jan 1 01:00:33 dsld[1016]: appl 0: sip-appl result 1 Jan 1 01:00:33 dsld[1016]: classifer: local "localmark sip" result 1 Jan 1 01:00:33 dsld[1016]: classifer: local "localmark rtp" result 1 Jan 1 01:00:33 dsld[1016]: classifer: local "localmark sipdns,ntpdns,tr069dns,tr069" result 2 [ 33.950000] kdsld: nr_ipv4 0 nr_ipv6 0 nr_vpn 0 Jan 1 01:00:33 dsld[1016]: classifer: local "localmark igmp" result 3 Jan 1 01:00:33 dsld[1016]: classifer: local "localmark webdav" result 4 Jan 1 01:00:33 dsld[1016]: classifer: lan "udp.dport 43962,47806" result 2 Jan 1 01:00:33 dsld[1016]: classifer: lan "ip.proto IPv6-ICMP" result 2 Jan 1 01:00:33 dsld[1016]: classifer: lan "ip.proto icmp" result 2 Jan 1 01:00:33 dsld[1016]: classifer: lan "udp.dport 53" result 2 Jan 1 01:00:33 dsld[1016]: classifer: lan "udp.dport 5060" result 5 Jan 1 01:00:33 dsld[1016]: classifer: lan "dhcpoption 12 FRITZ!Media* mediatab" result 6 Jan 1 01:00:33 dsld[1016]: classifer: lan "ethsrctab mediatab" result 6 Jan 1 01:00:33 dsld[1016]: classifer: local "localmark sip_internet" result 1 Jan 1 01:00:33 dsld[1016]: classifer: local "localmark rtp_internet" result 1 Jan 1 01:00:33 dsld[1016]: result 0: tos 65535 vprio 65535 queue 5 appl 65535 bridge 65535 forward 65535 Jan 1 01:00:33 dsld[1016]: result 1: tos 65535 vprio 6 queue 2 appl 65535 bridge 65535 forward 65535 Jan 1 01:00:33 dsld[1016]: result 2: tos 65535 vprio 65535 queue 1 appl 65535 bridge 65535 forward 65535 Jan 1 01:00:33 dsld[1016]: result 3: tos 65535 vprio 65535 queue 0 appl 65535 bridge 65535 forward 65535 Jan 1 01:00:33 dsld[1016]: result 4: tos 65535 vprio 65535 queue 6 appl 65535 bridge 65535 forward 65535 Jan 1 01:00:33 dsld[1016]: result 5: tos 65535 vprio 6 queue 2 appl 0 bridge 65535 forward 65535 Jan 1 01:00:33 dsld[1016]: result 6: tos 65535 vprio 65535 queue 3 appl 65535 bridge 65535 forward 65535 Jan 1 01:00:33 dsld[1016]: interface lo added. Jan 1 01:00:33 dsld[1016]: interface lo up. Jan 1 01:00:33 dsld[1016]: interface tunl0 added. Jan 1 01:00:33 dsld[1016]: interface sit0 added. Jan 1 01:00:33 dsld[1016]: interface eth0 added. Jan 1 01:00:33 dsld[1016]: interface eth0 up. Jan 1 01:00:33 dsld[1016]: interface eth1 added. Jan 1 01:00:33 dsld[1016]: interface eth1 up. Jan 1 01:00:33 dsld[1016]: interface adsl added. Jan 1 01:00:33 dsld[1016]: interface lan added. Jan 1 01:00:33 dsld[1016]: interface lan up. Jan 1 01:00:33 dsld[1016]: interface guest added. Jan 1 01:00:33 dsld[1016]: interface guest up. Jan 1 01:00:33 dsld[1016]: interface hotspot added. Jan 1 01:00:33 dsld[1016]: interface hotspot up. Jan 1 01:00:33 dsld[1016]: start register_vccs_and_ifaces_on_kdsld for sync_dsl Jan 1 01:00:33 dsld[1016]: setup_dslchannel: ifname= Jan 1 01:00:33 dsld[1016]: kdsld_preregister_vcc: predsl1 <3>kdsld: kdsld_vcc_preregister: predsl1 <3>kdsld: kdsld_vcc_preregister: vcc->ifaces=(null) Jan 1 01:00:33 dsld[1016]: kdsld_preregister_vcc: kdsld_vccidx=0 Jan 1 01:00:33 dsld[1016]: udsliface->cfg->dsldpconfig=0x2aab5c00 [ 34.320000] kdsld: internet: set_rcv_ipaddr: 192.168.178.1 Jan 1 01:00:33 dsld[1016]: udslcb_created: nr=0 (sync_dsl) Jan 1 01:00:33 dsld[1016]: udsliface->attached=1(0x449bc8) Jan 1 01:00:33 dsld[1016]: udslinterface_set_forwardrules: group=1 Jan 1 01:00:33 dsld[1016]: collect_configured_forwardrules: add rule tr069:internet:tcp 0.0.0.0:8089 0.0.0.0:8089 Jan 1 01:00:33 dsld[1016]: udslinterface_set_internet_forwardrules: FORWARDRULES_INTERNET_NORMAL=13 Jan 1 01:00:33 dsld[1016]: udslinterface_set_forwardrules: group=13 Jan 1 01:00:33 dsld[1016]: udslinterface_set_forwardrules: group=10 Jan 1 01:00:33 dsld[1016]: udslinterface_set_forwardrules: group=11 Jan 1 01:00:33 dsld[1016]: udslinterface_set_forwardrules: group=12 Jan 1 01:00:34 dsld[1016]: verbose: DISABLED Jan 1 01:00:35 telefon[1030]: use clock_gettime(CLOCK_MONOTONIC)! Jan 1 01:00:35 telefon[1030]: No S0NT! Jan 1 01:00:35 telefon[1030]: NoOldMSNNames Jan 1 01:00:35 ctlmgr[973]: WLANLIB: my_wlan_init:649: svn revision 1493 Jan 1 01:00:35 ctlmgr[973]: WLANLIB: weak_wlan_check:63: Missing weak 'process_wlanmail'. telefon: SIGCHLD PID 1032 received! Jan 1 01:00:35 telefon[1030]: WARNING No config file '/var/flash/fx_def' ! telefon: SIGCHLD PID 1050 received! group 4 done ... source files in group 5 ... exceute files in group 5 ... group 5 done ... source files in group 6 ... exceute files in group 6 ... group 6 done ... source files in group 7 ... /etc/init.d/S73-capitcp /etc/init.d/S76-media /etc/init.d/S75-inetd /etc/init.d/S78-aha Jan 1 01:00:38 dsld[1016]: udslinterface_set_forwardrules: group=0 [ 38.890000] dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: F6 14 [ 39.310000] [module-alloc-by-name] give 0x1000 bytes at 0x813E1000 to module 'sch_tbf' (0x37B000 bytes left) [ 39.310000] [module-alloc-by-name] 0x1000 bytes used, 0x263C bytes expected [ 39.460000] [module-alloc-by-name] give 0x2000 bytes at 0x813E2000 to module 'sch_llq' (0x379000 bytes left) [ 39.460000] [module-alloc-by-name] 0x2000 bytes used, 0x3734 bytes expected [ 39.470000] sch_llq: Dec 5 2013 14:42:22 [ 39.490000] [DECTDRV_ERR] API_FP_MAC_START_STOP_REQ 255 -> 0 [ 39.490000] [DECTDRV_ERR] EepromReadExtRecord, record 0 not found (no records) [ 39.490000] [DECTDRV_ERR] EepromReadExtRecord, record 0 not found (no records) [ 39.540000] [module-alloc-by-name] give 0x2000 bytes at 0x813E4000 to module 'sch_sfq' (0x377000 bytes left) [ 39.540000] [module-alloc-by-name] 0x2000 bytes used, 0x29FC bytes expected /etc/init.d/rc.S: /etc/init.d/S76-media: line 6: /etc/init.d/rc.media: not found Jan 1 01:00:39 telefon[1040]: NoOldMSNNames Jan 1 01:00:39 dsld[1016]: !!!!!!!!!!!!!!!!!route_add: default: metric=2, iface=dsl mknod: /var/flash/fx_def: File exists telefon: SIGCHLD PID 1095 received! Jan 1 01:00:39 telefon[1040]: WARNING No config file '/var/flash/fx_def' ! killall: aha: no process killed [ 40.240000] [module-alloc-by-name] give 0x1B000 bytes at 0x813E6000 to module 'aae' (0x35C000 bytes left) [ 40.240000] [module-alloc-by-name] 0x1B000 bytes used, 0x2050C bytes expected [ 40.340000] [wlan_config] Given config is: [ 40.340000] [wlan_config] hw_interface=0 chip_type=3 (kiwi) offload=1 (non) [ 40.340000] [wlan_eeprom] Calibration data blocks found = 1 [ 40.340000] [wlan_eeprom] EEPROM #1, type "AR92x7": [ 40.340000] [wlan_eeprom] Build with ART 0.9b21 Jan 1 01:00:40 telefon[1040]: Stop DECT [ 40.500000] [DECTDRV_ERR] API_FP_MAC_START_STOP_REQ 0 -> 0 [ 40.500000] [DECTDRV_ERR] API_FP_MAC_START_STOP_REQ 0 -> 0 [ 42.710000] [0]system-load 100 % loadavg 1.96 0.48 0.16 - 88 tasks:54 % curr:exe(0 %) max:ctlmgr(19 %, pid:973), readytorun: 2, pgfault 4078/s (max 3 avg 1.1) [aha: avm_home_global_save_init] Error: no data in '/var/flash/ahaglobal.cfg' exceute files in group 7 ... group 7 done ... source files in group 8 ... /etc/init.d/S85-apps exceute files in group 8 ... group 8 done ... source files in group 9 ... /etc/init.d/S99-tail [ 44.330000] [module-alloc-by-name] give 0x4000 bytes at 0x81401000 to module 'adf' (0x358000 bytes left) [ 44.330000] [module-alloc-by-name] 0x4000 bytes used, 0x5210 bytes expected [ 44.630000] [module-alloc-by-name] give 0x2000 bytes at 0x81405000 to module 'asf' (0x356000 bytes left) [ 44.630000] [module-alloc-by-name] 0x2000 bytes used, 0x318C bytes expected run_clock demon started AVM_WATCHDOG: System Init UEberwachung abgeschlossen (199690 ms noch verfuegbar) [ 45.350000] SysRq : Changing Loglevel Loglevel set to 4 Info: have to stop cat /dev/debug. [ 5.380000] [module-alloc-by-name] give 0x8000 bytes at 0x81093000 to module 'Piglet_noemif' (0x6C2000 bytes left) [ 5.380000] [module-alloc-by-name] 0x8000 bytes used, 0xAB30 bytes expected [ 5.390000] [piglet]use default-settings (1 gpio from hw_config) [ 5.540000] patch_dectfw: C025D000, totallen = 45267(B0D3) [ 5.540000] patch_dectfw: patch_adress: A0 max_len: 26 with Version 2 Len: 17 [ 5.540000] patch_dectfw: dectmode 1 [ 5.540000] dect_loader: slow-bootmode <FE>* **************************************************************************************** [ 8.850000] dect144xx_file_process: upload of '/lib/modules/dectfw_secondlevel_441.hex' successfull [ 10.860000] [piglet]TDM: FS: 8005 Hz CLK: 1023980 Hz [ 11.850000] [0]system-load 6 loadavg 0.15 0.3 0.1 - 23 tasks:27 % curr:mtdblockd(10 %) max:init(11 %, pid:1), readytorun: 2, pgfault 2022/s (max 1 avg 1.0) [ 12.290000] [module-alloc-by-name] give 0x5D000 bytes at 0x8109B000 to module 'pcmlink' (0x665000 bytes left) [ 12.290000] [module-alloc-by-name] 0x5D000 bytes used, 0x65E18 bytes expected [pcmlink]svn: 1922[AHA] SIGHUP received [AHA] SIGHUP received [AHA] SIGHUP received [AHA] SIGHUP received [AHA] SIGHUP received [AHA] SIGHUP received [aha: avm_home_upper_connection_thread] Error: message received (ret=-1, errno 4, 'Interrupted system call') [AHA] SIGHUP received telefon: SIGHUP received! telefon: SIGHUP received! pbd[1029]: received signal Hangup pbd[1028]: received signal Hangup pbd[1027]: received signal Hangup pbd[1024]: received signal Hangup Please press Enter to activate this console. [AHA] SIGHUP received rc.wlan: Start WLAN... rc.wlan: WLAN daemon already running starting pid 1393, tty '/dev/ttyS1': '-/bin/sh' BusyBox v1.19.3 (2012-08-08 12:53:46 CEST) built-in shell (ash) Enter 'help' for a list of built-in commands. ermittle die aktuelle TTY tty is "/dev/ttyS1" Serielles Terminal # telefon: SIGCHLD PID 1109 received! telefon: SIGCHLD PID 1052 received! # ls bin dev filesystem mnt proc sys usr var.tar data etc lib nohup.out sbin tmp var # cat /proc/cpuinfo system type : AR9 processor : 0 cpu model : MIPS 34Kc V4.12 BogoMIPS : 261.32 wait instruction : yes microsecond timers : yes tlb_entries : 16 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] ASEs implemented : mips16 dsp mt shadow register sets : 1 core : 0 VCED exceptions : not available VCEI exceptions : not available # cat /proc/meminfo MemTotal: 51996 kB MemFree: 6908 kB Buffers: 3964 kB Cached: 14788 kB SwapCached: 0 kB Active: 11616 kB Inactive: 13912 kB Active(anon): 9592 kB Inactive(anon): 1668 kB Active(file): 2024 kB Inactive(file): 12244 kB Unevictable: 4284 kB Mlocked: 4284 kB SwapTotal: 8184 kB SwapFree: 8184 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 11076 kB Mapped: 9908 kB Shmem: 1388 kB Slab: 13776 kB SReclaimable: 1308 kB SUnreclaim: 12468 kB KernelStack: 1472 kB PageTables: 472 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 34180 kB Committed_AS: 16712 kB VmallocTotal: 1048372 kB VmallocUsed: 836 kB VmallocChunk: 1019756 kB Reserved: 13148 kB # cat /proc/mtd dev: size erasesize name mtd0: 00e05700 00020000 "rootfs" mtd1: 0015a900 00020000 "kernel" mtd2: 00020000 00020000 "urlader" mtd3: 00040000 00020000 "tffs (1)" mtd4: 00040000 00020000 "tffs (2)" mtd5: 00100000 00020000 "jffs2" mtd6: 01000000 00020000 "mtd-nor" # ps -w PID USER VSZ STAT COMMAND 1 root 1236 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 4 root 0 SW [events/0] 5 root 0 SW [khelper] 8 root 0 SW [async/mgr] 22 root 0 SW [sync_supers] 23 root 0 SW [bdi-default] 25 root 0 SW [kblockd/0] 43 root 0 SW [kswapd0] 44 root 0 SW [aio/0] 53 root 0 SW [pm_info] 60 root 0 SWN [avmdebug] 86 root 0 SW [mtdblockd] 104 root 0 SW [l2tp] 108 root 0 SW [tffsd_mtd_0] 109 root 0 SW [avmnet_workqueu] 112 root 0 SW [avmnet_timer] 172 root 0 SW [cleanup_timer_f] 287 root 0 SWN [jffs2_gcd_mtd5] 308 root 0 SW< [loop0] 317 root 0 SW [capi_pipew/0] 318 root 0 SW [capi_schedw/0] 319 root 0 SW [pcmlink_ctrl] 320 root 0 SW [capitransp] 323 root 0 SW< [avm_dect_thread] 324 root 0 SW [ksock tcp worke] 325 root 0 SW [ksock tcp serve] 407 root 0 SW [flush-7:0] 411 root 1400 S < /sbin/udevd --daemon 434 root 0 SW [khubd] 523 root 0 SW [flush-254:0] 694 root 1404 S < /sbin/udevd --daemon 695 root 1404 S < /sbin/udevd --daemon 750 root 2476 S /bin/configd 810 root 0 SW [RTT_Client] 818 root 3152 S dsl_control -i10_00_10_40_00_04_01_00 -f/lib/modules/dsp_ar9/ar9-B-dsl.bin -n/etc/dsl/notify/dsl_notify.s 826 root 2492 S dsl_monitor -d 827 root 2492 S dsl_monitor -d 828 root 2492 S dsl_monitor -d 830 root 2492 S dsl_monitor -d 836 root 3152 S dsl_control -i10_00_10_40_00_04_01_00 -f/lib/modules/dsp_ar9/ar9-B-dsl.bin -n/etc/dsl/notify/dsl_notify.s 837 root 3152 S dsl_control -i10_00_10_40_00_04_01_00 -f/lib/modules/dsp_ar9/ar9-B-dsl.bin -n/etc/dsl/notify/dsl_notify.s 838 root 3152 S dsl_control -i10_00_10_40_00_04_01_00 -f/lib/modules/dsp_ar9/ar9-B-dsl.bin -n/etc/dsl/notify/dsl_notify.s 839 root 3152 S dsl_control -i10_00_10_40_00_04_01_00 -f/lib/modules/dsp_ar9/ar9-B-dsl.bin -n/etc/dsl/notify/dsl_notify.s 840 root 3152 S dsl_control -i10_00_10_40_00_04_01_00 -f/lib/modules/dsp_ar9/ar9-B-dsl.bin -n/etc/dsl/notify/dsl_notify.s 841 root 3152 S dsl_control -i10_00_10_40_00_04_01_00 -f/lib/modules/dsp_ar9/ar9-B-dsl.bin -n/etc/dsl/notify/dsl_notify.s 959 root 0 SWN [dectuart_route] 963 root 2692 S avmipcd 965 root 3208 S l2tpv3d 973 root 13420 S ctlmgr 977 root 7096 S upnpd 978 root 0 SW [autbtex] 979 root 0 SW [ceocex_ne] 980 root 0 SW [pmex_ne] 981 root 0 SW [pmex_fe] 986 root 3948 S multid 998 root 2892 S upnpdevd 1001 root 2892 S upnpdevd 1010 root 2588 S wland -B 1016 root 4276 S dsld -i -n 1024 root 4340 S pbd 1025 root 4340 S pbd 1028 root 4340 S pbd 1029 root 4340 S pbd 1033 root 13420 S ctlmgr 1034 root 13420 S ctlmgr 1035 root 13420 S ctlmgr 1040 root 5752 S telefon a127.0.0.1 1048 root 5752 S telefon a127.0.0.1 1049 root 5752 S telefon a127.0.0.1 1055 root 5812 S < voipd 1079 root 1236 S /usr/sbin/inetd 1280 root 4488 S /usr/bin/aha 1301 root 4488 S /usr/bin/aha 1302 root 4488 S {upper_conn} /usr/bin/aha 1305 root 4488 S /usr/bin/aha 1306 root 4488 S /usr/bin/aha 1307 root 4488 S /usr/bin/aha 1309 root 4488 S /usr/bin/aha 1310 root 4488 S /usr/bin/aha 1313 root 4488 S {sRX} /usr/bin/aha 1380 root 1136 S /bin/run_clock -c /dev/tffs -d 1393 root 1244 S -/bin/sh 1494 root 7096 S upnpd 1495 root 7096 S upnpd 1496 root 7096 S upnpd 1688 root 1412 S hostapd -B /etc/wpa2/WSC_ath0.conf 1773 root 2652 S /sbin/nmbd 1790 root 3416 S usermand 1792 root 3268 S contfiltd 1805 root 1232 R ps -w # df Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 13056 13056 0 100% / tmpfs 25996 1004 24992 4% /var tmpfs 25996 48 25948 0% /dev /dev/mtdblock5 1024 424 600 41% /data /dev/loop0 274 253 7 97% /var/media/ftp # mount rootfs on / type rootfs (rw) /dev/root on / type squashfs (ro,relatime) proc on /proc type proc (rw,relatime) tmpfs on /var type tmpfs (rw,relatime) tmpfs on /dev type tmpfs (rw,relatime) sysfs on /sys type sysfs (rw,relatime) devpts on /dev/pts type devpts (rw,relatime,mode=600) /dev/mtdblock5 on /data type jffs2 (rw,relatime) /dev/loop0 on /var/media/ftp type ext2 (rw,relatime) usbfs on /proc/bus/usb type usbfs (rw,relatime)


Lede Reboot 17.01.1 r3316-7eb58cf109

ROM VER: 1.1.3 CFG 01 (AVM) EVA Revision: 1.1820 Version: 2820 (C) Copyright 2005 AVM Date: Jul 16 2013 Time: 15:40:46 (1) 3 0x0-0xB41D [FLASH:] MACRONIX Uniform-Flash 16MB 64 Bytes WriteBuffer [FLASH:](Eraseregion [0] 128 sectors a 128kB) [SYSTEM:] AR9 on 393MHz/393MHz/196MHz Atheros 8035 detected Atheros 8030 detected Eva_AVM >...................................... [ 0.000000] Linux version 4.4.61 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3103-1b51a49) ) #0 Sat Apr 15 16:13:45 2017 [ 0.000000] SoC: AR9 rev 1.2 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001954c (MIPS 34Kc) [ 0.000000] MIPS: machine is FRITZ7320 - 1&1 HomeServer [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyLTQ0,115200 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000009 [ 0.000000] Readback ErrCtl register=00000009 [ 0.000000] Memory: 58796K/65536K available (3877K kernel code, 162K rwdata, 620K rodata, 1212K init, 200K bss, 6740K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:256 [ 0.000000] CPU Clock: 393MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9721189849 ns [ 0.000013] sched_clock: 32 bits at 196MHz, resolution 5ns, wraps every 10922685437ns [ 0.007942] Calibrating delay loop... 260.86 BogoMIPS (lpj=521728) [ 0.042400] pid_max: default: 32768 minimum: 301 [ 0.047262] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.053805] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.066965] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.076628] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.082836] pinctrl core: initialized pinctrl subsystem [ 0.089637] NET: Registered protocol family 16 [ 0.098888] pinctrl-xway 1e100b10.pinmux: Init done [ 0.104939] dma-xway 1e104100.dma: Init done - hw rev: 6, ports: 5, channels: 20 [ 0.164504] Can't analyze schedule() prologue at 80009038 [ 0.179101] PCI host bridge /fpi@10000000/pci@E105400 ranges: [ 0.184758] MEM 0x0000000018000000..0x0000000019ffffff [ 0.190013] IO 0x000000001ae00000..0x000000001affffff [ 0.211860] usbcore: registered new interface driver usbfs [ 0.217416] usbcore: registered new interface driver hub [ 0.222754] usbcore: registered new device driver usb [ 0.228143] PCI host bridge to bus 0000:00 [ 0.232153] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff] [ 0.239060] pci_bus 0000:00: root bus resource [io 0x1ae00000-0x1affffff] [ 0.246004] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.252861] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.261518] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff] [ 0.269351] clocksource: Switched to clocksource MIPS [ 0.275914] NET: Registered protocol family 2 [ 0.281552] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.288457] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.294846] TCP: Hash tables configured (established 1024 bind 1024) [ 0.301477] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.307236] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.313828] NET: Registered protocol family 1 [ 0.326026] gptu: totally 6 16-bit timers/counters [ 0.330913] gptu: misc_register on minor 63 [ 0.335005] gptu: succeeded to request irq 126 [ 0.339488] gptu: succeeded to request irq 127 [ 0.344001] gptu: succeeded to request irq 128 [ 0.348515] gptu: succeeded to request irq 129 [ 0.353029] gptu: succeeded to request irq 130 [ 0.357545] gptu: succeeded to request irq 131 [ 0.363139] Crashlog allocated RAM at address 0x3f00000 [ 0.393423] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.399132] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.414048] io scheduler noop registered [ 0.417882] io scheduler deadline registered (default) [ 0.423845] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc [ 0.432772] console [ttyLTQ0] enabled [ 0.432772] console [ttyLTQ0] enabled [ 0.440020] bootconsole [early0] disabled [ 0.440020] bootconsole [early0] disabled [ 0.449066] lantiq nor flash device: 01000000 at 10000000 [ 0.453201] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e [ 0.462518] Amd/Fujitsu Extended Query Table at 0x0040 [ 0.467603] Amd/Fujitsu Extended Query version 1.3. [ 0.472591] number of CFI chips: 1 [ 0.476001] 4 ofpart partitions found on MTD device ltq_nor [ 0.481483] Creating 4 MTD partitions on "ltq_nor": [ 0.486312] 0x000000000000-0x000000020000 : "urlader" [ 0.495609] 0x000000020000-0x000000f80000 : "firmware" [ 0.521607] 2 eva-fw partitions found on MTD device firmware [ 0.525847] 0x000000020000-0x00000019cd49 : "kernel" [ 0.532863] 0x0000001a0100-0x000000f80000 : "rootfs" [ 0.539037] mtd: device 3 (rootfs) set to be root filesystem [ 0.543333] 1 squashfs-split partitions found on MTD device rootfs [ 0.549388] 0x000000440000-0x000000f80000 : "rootfs_data" [ 0.557424] 0x000000f80000-0x000000fc0000 : "tffs (1)" [ 0.563769] 0x000000fc0000-0x000001000000 : "tffs (2)" [ 0.579816] libphy: ltq_mii: probed [ 0.582183] eth0: attached PHY [Generic PHY] (phy_addr=1e180000.etop-ff:00, irq=-1) [ 0.591048] wdt 1f8803f0.watchdog: Init done [ 0.597332] NET: Registered protocol family 10 [ 0.608145] NET: Registered protocol family 17 [ 0.611305] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.623686] 8021q: 802.1Q VLAN Support v1.8 [ 0.627909] found entry name -> annex=B [ 0.631664] found entry name -> maca=xx:xx:xx:xx:xx:xx [ 0.636703] found entry name -> macb=xx:xx:xx:xx:xx:xx [ 0.641795] found entry name -> macwlan=xx:xx:xx:xx:xx:xx [ 0.647141] found entry name -> macdsl=xx:xx:xx:xx:xx:xx [ 0.652473] found entry name -> macwlan2=xx:xx:xx:xx:xx:xx [ 0.657841] found entry name -> wlan_key=xxxxxxxxxxxxxxxxxxxx [ 0.676492] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 0.684283] Freeing unused kernel memory: 1212K (80491000 - 805c0000) [ 2.074008] init: Console is alive [ 2.076319] init: - watchdog - [ 4.621617] dwc2 1e101000.ifxhcd: DWC OTG Controller [ 4.625193] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1 [ 4.632473] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000 [ 4.639514] hub 1-0:1.0: USB hub found [ 4.642433] hub 1-0:1.0: 1 port detected [ 4.648546] init: - preinit - [ 5.462459] random: procd: uninitialized urandom read (4 bytes read, 22 bits of entropy available) Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 8.932818] jffs2: notice: (358) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 8.949558] mount_root: switching to jffs2 overlay [ 8.963800] urandom-seed: Seeding with /etc/urandom.seed [ 9.156679] procd: - early - [ 9.158407] procd: - watchdog - [ 9.870563] procd: - ubus - [ 9.997092] random: ubusd: uninitialized urandom read (4 bytes read, 40 bits of entropy available) [ 10.006144] random: ubusd: uninitialized urandom read (4 bytes read, 40 bits of entropy available) [ 10.014344] random: ubusd: uninitialized urandom read (4 bytes read, 40 bits of entropy available) [ 10.022676] random: ubusd: uninitialized urandom read (4 bytes read, 40 bits of entropy available) [ 10.032183] random: ubusd: uninitialized urandom read (4 bytes read, 40 bits of entropy available) [ 10.040438] random: ubusd: uninitialized urandom read (4 bytes read, 40 bits of entropy available) [ 10.049921] random: ubusd: uninitialized urandom read (4 bytes read, 41 bits of entropy available) [ 10.058539] random: ubusd: uninitialized urandom read (4 bytes read, 41 bits of entropy available) [ 10.067752] procd: - init - Please press Enter to activate this console. [ 10.632918] NET: Registered protocol family 8 [ 10.635882] NET: Registered protocol family 20 [ 10.647574] PPP generic driver version 2.4.2 [ 10.658867] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.675643] IFX MEI Version 5.00.00 [ 10.686601] Infineon CPE API Driver version: DSL CPE API V3.24.4.4 [ 10.699737] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f [ 10.706326] Backport generated by backports.git backports-20160324-13-g24da7d3c [ 10.717687] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.729746] ATM1.0.26 ATM (A1) firmware version 0.16 [ 10.733554] ifxmips_atm: ATM init succeed [ 10.848099] Infineon Technologies DEU driver version 2.0.0 [ 10.854474] IFX DEU DES initialized (multiblock). [ 10.859107] IFX DEU AES initialized (multiblock). [ 10.862966] IFX DEU ARC4 initialized (multiblock). [ 10.867496] IFX DEU SHA1 initialized. [ 10.871077] IFX DEU MD5 initialized. [ 10.874630] IFX DEU SHA1_HMAC initialized. [ 10.878685] IFX DEU MD5_HMAC initialized. [ 10.890898] nf_conntrack version 0.5.0 (937 buckets, 3748 max) [ 10.916445] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002) [ 10.924968] owl-loader 0000:00:0e.0: fixup device configuration [ 10.932162] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff] [ 10.942632] NET: Registered protocol family 24 [ 10.968707] xt_time: kernel timezone is -0000 [ 11.073512] random: ubusd: uninitialized urandom read (4 bytes read, 45 bits of entropy available) [ 11.180239] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002) [ 11.195036] ath: phy0: eeprom contains invalid mac address: 00:00:00:00:00:00 [ 11.200784] ath: phy0: random mac address will be used: f2:df:1b:d9:f8:3c [ 11.232352] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb8000000, irq=30 [ 23.891937] device eth0 entered promiscuous mode [ 23.904030] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 24.729135] IPv6: ADDRCONF(NETDEV_UP): nas0: link is not ready [ 25.637741] br-lan: port 1(eth0) entered forwarding state [ 25.641814] br-lan: port 1(eth0) entered forwarding state [ 25.689471] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 27.645429] br-lan: port 1(eth0) entered forwarding state [ 27.731452] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.792512] device wlan0 entered promiscuous mode [ 27.850316] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 27.855559] br-lan: port 2(wlan0) entered forwarding state [ 27.860784] br-lan: port 2(wlan0) entered forwarding state [ 29.829418] random: nonblocking pool is initialized [ 29.861364] br-lan: port 2(wlan0) entered forwarding state BusyBox v1.25.1 () built-in shell (ash) _________ / /\ _ ___ ___ ___ / LE / \ | | | __| \| __| / DE / \ | |__| _|| |) | _| /________/ LE \ |____|___|___/|___| lede-project.org \ \ DE / \ LE \ / ----------------------------------------------------------- \ DE \ / Reboot (17.01.1, r3316-7eb58cf109) \________\/ ----------------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@LEDE:/# ifconfig br-lan Link encap:Ethernet HWaddr 00:11:22:33:44:55 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fdd1:4b0a:fb4::1/60 Scope:Global inet6 addr: fe80::211:22ff:fe33:4455/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:321 errors:0 dropped:0 overruns:0 frame:0 TX packets:265 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:31283 (30.5 KiB) TX bytes:38169 (37.2 KiB) eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:55 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:324 errors:0 dropped:0 overruns:0 frame:0 TX packets:269 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:36305 (35.4 KiB) TX bytes:39470 (38.5 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:2192 (2.1 KiB) TX bytes:2192 (2.1 KiB) nas0 Link encap:Ethernet HWaddr 00:00:01:00:00:00 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr F2:DF:1B:D9:F8:3C inet6 addr: fe80::f0df:1bff:fed9:f83c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:73 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:14068 (13.7 KiB) root@LEDE:/#


OpenWrt Chaos Calmer 15.05.1-r48532

ROM VER: 1.1.3 CFG 01 (AVM) EVA Revision: 1.1820 Version: 2820 (C) Copyright 2005 AVM Date: Jul 16 2013 Time: 15:40:46 (0) 3 0x0-0xB41D [FLASH:] MACRONIX Uniform-Flash 16MB 64 Bytes WriteBuffer [FLASH:](Eraseregion [0] 128 sectors a 128kB) [SYSTEM:] AR9 on 393MHz/393MHz/196MHz Atheros 8035 detected Atheros 8030 detected Eva_AVM >............................. [ 0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47269) ) #1 Sun Jan 31 12:02:45 CET 2016 [ 0.000000] SoC: AR9 rev 1.2 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001954c (MIPS 34Kc) [ 0.000000] MIPS: machine is FRITZ7320 - 1&1 HomeServer [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000007 [ 0.000000] Readback ErrCtl register=00000007 [ 0.000000] Memory: 60152K/65536K available (3433K kernel code, 151K rwdata, 768K rodata, 172K init, 194K bss, 5384K reserved) [ 0.000000] NR_IRQS:256 [ 0.000000] CPU Clock: 393MHz [ 0.000000] Calibrating delay loop... 260.86 BogoMIPS (lpj=521728) [ 0.032000] pid_max: default: 32768 minimum: 301 [ 0.036000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.040000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.044000] pinctrl core: initialized pinctrl subsystem [ 0.048000] NET: Registered protocol family 16 [ 0.056000] pinctrl-xway 1e100b10.pinmux: Init done [ 0.060000] dma-xway 1e104100.dma: Init done - hw rev: 6, ports: 5, channels: 20 [ 0.064000] PCI host bridge /fpi@10000000/pci@E105400 ranges: [ 0.068000] MEM 0x0000000018000000..0x0000000019ffffff [ 0.072000] IO 0x000000001ae00000..0x000000001affffff [ 0.084000] usbcore: registered new interface driver usbfs [ 0.088000] usbcore: registered new interface driver hub [ 0.092000] usbcore: registered new device driver usb [ 0.096000] PCI host bridge to bus 0000:00 [ 0.100000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff] [ 0.104000] pci_bus 0000:00: root bus resource [io 0xffffffff] [ 0.108000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.112000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff] [ 0.116000] Switched to clocksource MIPS [ 0.120000] NET: Registered protocol family 2 [ 0.124000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.132000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.140000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.144000] TCP: reno registered [ 0.148000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.156000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.160000] NET: Registered protocol family 1 [ 0.168000] gptu: totally 6 16-bit timers/counters [ 0.172000] gptu: misc_register on minor 63 [ 0.176000] gptu: succeeded to request irq 126 [ 0.180000] gptu: succeeded to request irq 127 [ 0.184000] gptu: succeeded to request irq 128 [ 0.188000] gptu: succeeded to request irq 129 [ 0.192000] gptu: succeeded to request irq 130 [ 0.196000] gptu: succeeded to request irq 131 [ 0.204000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.228000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.232000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.256000] msgmni has been set to 117 [ 0.260000] io scheduler noop registered [ 0.264000] io scheduler deadline registered (default) [ 0.272000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc [ 0.280000] console [ttyLTQ0] enabled [ 0.280000] console [ttyLTQ0] enabled [ 0.288000] bootconsole [early0] disabled [ 0.288000] bootconsole [early0] disabled [ 0.296000] lantiq nor flash device: 01000000 at 10000000 [ 0.300000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e [ 0.312000] Amd/Fujitsu Extended Query Table at 0x0040 [ 0.316000] Amd/Fujitsu Extended Query version 1.3. [ 0.320000] number of CFI chips: 1 [ 0.324000] 4 ofpart partitions found on MTD device ltq_nor [ 0.328000] Creating 4 MTD partitions on "ltq_nor": [ 0.336000] 0x000000000000-0x000000020000 : "urlader" [ 0.340000] 0x000000020000-0x000000f80000 : "firmware" [ 0.364000] 0x0000001a0100-0x000000f80000 : "rootfs" [ 0.368000] mtd: device 2 (rootfs) set to be root filesystem [ 0.376000] 1 squashfs-split partitions found on MTD device rootfs [ 0.380000] 0x000000440000-0x000000f80000 : "rootfs_data" [ 0.408000] 0x000000f80000-0x000000fc0000 : "tffs (1)" [ 0.412000] 0x000000fc0000-0x000001000000 : "tffs (2)" [ 0.420000] etop: invalid MAC, using random [ 0.444000] libphy: ltq_mii: probed [ 0.444000] eth0: attached PHY [Generic PHY] (phy_addr=1e180000.etop-ff:00, irq=-1) [ 0.452000] wdt 1f8803f0.watchdog: Init done [ 0.460000] TCP: cubic registered [ 0.460000] NET: Registered protocol family 17 [ 0.464000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.476000] Bridge firewalling registered [ 0.480000] 8021q: 802.1Q VLAN Support v1.8 [ 0.484000] found entry name -> annex=B [ 0.488000] found entry name -> maca=xx:xx:xx:xx:xx:xx [ 0.496000] found entry name -> macb=xx:xx:xx:xx:xx:xx [ 0.500000] found entry name -> macwlan=xx:xx:xx:xx:xx:xx [ 0.504000] found entry name -> macdsl=xx:xx:xx:xx:xx:xx [ 0.512000] found entry name -> macwlan2=xx:xx:xx:xx:xx:xx [ 0.516000] found entry name -> wlan_key= [ 0.532000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 0.548000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 0.552000] Freeing unused kernel memory: 172K (80445000 - 80470000) [ 2.096000] init: Console is alive [ 2.096000] init: - watchdog - [ 4.116000] IFXUSB: ifxusb_hcd: version 3.2 B110801 [ 4.620000] IFXUSB: USB core #0 soft-reset [ 4.824000] IFXUSB: USB core #0 soft-reset [ 4.828000] ifxusb_hcd ifxusb_hcd: IFX USB Controller [ 4.832000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1 [ 4.840000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000 [ 4.844000] IFXUSB: Init: Power Port (0) [ 4.848000] hub 1-0:1.0: USB hub found [ 4.852000] hub 1-0:1.0: 1 port detected [ 5.848000] init: - preinit - [ 6.268000] random: procd urandom read with 24 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 9.620000] jffs2: notice: (260) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 9.636000] mount_root: switching to jffs2 overlay [ 9.660000] procd: - early - [ 9.660000] procd: - watchdog - [ 10.680000] procd: - ubus - [ 11.692000] procd: - init - Please press Enter to activate this console. [ 12.744000] NET: Registered protocol family 10 [ 12.752000] NET: Registered protocol family 8 [ 12.756000] NET: Registered protocol family 20 [ 12.768000] PPP generic driver version 2.4.2 [ 12.780000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.796000] IFX MEI Version 5.00.00 [ 12.808000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4 [ 12.820000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 12.828000] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 12.836000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.852000] ATM1.0.26 ATM (A1) firmware version 0.16 [ 12.856000] ifxmips_atm: ATM init succeed [ 12.864000] Infineon Technologies DEU driver version 2.0.0 [ 12.872000] IFX DEU DES initialized (multiblock). [ 12.880000] IFX DEU AES initialized (multiblock). [ 12.888000] IFX DEU ARC4 initialized (multiblock). [ 12.892000] IFX DEU SHA1 initialized. [ 12.892000] IFX DEU MD5 initialized. [ 12.896000] IFX DEU SHA1_HMAC initialized. [ 12.904000] IFX DEU MD5_HMAC initialized. [ 12.916000] nf_conntrack version 0.5.0 (942 buckets, 3768 max) [ 12.968000] NET: Registered protocol family 24 [ 13.000000] xt_time: kernel timezone is -0000 [ 13.060000] cfg80211: Calling CRDA to update world regulatory domain [ 13.068000] cfg80211: World regulatory domain updated: [ 13.072000] cfg80211: DFS Master region: unset [ 13.076000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 13.084000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 13.092000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 13.100000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 13.108000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 13.120000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 13.128000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 13.136000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 13.144000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 22.964000] device eth0 entered promiscuous mode [ 22.968000] br-lan: port 1(eth0) entered forwarding state [ 22.972000] br-lan: port 1(eth0) entered forwarding state [ 24.976000] br-lan: port 1(eth0) entered forwarding state [ 25.328000] br-lan: port 1(eth0) entered disabled state [ 31.828000] random: nonblocking pool is initialized


Tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/avm/avm_fritz_box_7320.txt · Last modified: 2019/08/15 10:14 by tmomas