TQ Components TQMa9263 Reference Board
The TQMa9263 is an extensible Atmel AT91SAM9263 based reference board featuring USB, Fast Ethernet, LCD, I²C and RS232 Ports.
Supported Versions
Version/Model | S/N | OpenWrt Version Supported | Model Specific Notes |
---|---|---|---|
- | - | Trunk | LCD not usable yet |
- No longer supported since board has reached EOL, see at91: remove support for TQMa9263
Hardware Highlights
CPU | Ram | Flash | Network | USB | Serial | JTag |
---|---|---|---|---|---|---|
Atmel AT91SAM9263 (ARM926EJ-S) | 128 MiB | 64 MiB | 1x 100M | 2x 2.0 Host, 1x 2.0 Device | Yes | ? |
Installation
Internal NAND
...
SD-Card
...
Hardware
Info
Architecture: ARM |
Vendor: Atmel (SoC), TQ Components (Board) |
Bootloader: U-Boot |
System-On-Chip: Atmel AT91SAM9263 |
CPU Speed: 200 Mhz |
Flash-Chip: ? |
Flash size: 64 MiB |
RAM: 128 MiB |
Wireless: none |
Ethernet: Atmel MAC |
USB: 2x 2.0 Host, 1x 2.0 Device |
Serial: Yes |
JTAG: ? |
Serial
Standard TTL Level Serial Port, Baudrate 115200, 8n1.
[RX] [TX] [GD] [VC] --+ +------------------------------------------+ M | | | M | | Atmel AT91SAM9263 | C | | | --+ | | |
Interfaces
The default network configuration is:
Interface Name | Description | Default configuration |
---|---|---|
eth0 | Atmel Ethernet | 192.168.1.1/24 |
usb0 | CDC Ether | none |
Failsafe mode
This board has no buttons, so failsafe is not usable.