Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:asus:wl-330n [2018/04/02 17:28] – Section heading levels corrected tmomastoh:asus:wl-330n [2019/09/02 18:24] – broken link fixed tmomas
Line 1: Line 1:
 ====== ASUS WL-330N & WL-330N3G ====== ====== ASUS WL-330N & WL-330N3G ======
 +
 +{{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
  
 **Ralink RT3050F** **Ralink RT3050F**
Line 135: Line 137:
 </code> Instead of the openwrt or lede image (lede-17.01.4-ramips-rt305x-wl-330n3g-squashfs-sysupgrade.bin) you can upload other images (eg. the original ASUS-Firmware: WL-330NG_1.0.2.0.trx). </code> Instead of the openwrt or lede image (lede-17.01.4-ramips-rt305x-wl-330n3g-squashfs-sysupgrade.bin) you can upload other images (eg. the original ASUS-Firmware: WL-330NG_1.0.2.0.trx).
   - Wait, flashing may take a couple of minutes. Do not power off!   - Wait, flashing may take a couple of minutes. Do not power off!
-  - The device will reboot when flashing is done. If you flashed OpenWrt/LEDE, telnet into 192.168.1.1 and set root password according to [[doc/howto/firstlogin|First Login]].+  - The device will reboot when flashing is done. If you flashed OpenWrt/LEDE, telnet into 192.168.1.1 and set root password according to [[docs:guide-quick-start:factory_installation#check_flash_result|First Login]].
  
 ===== Bootlogs ===== ===== Bootlogs =====
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1