Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:asus:wl-330n [2018/04/02 17:26] – OpenWrt spelling tmomastoh:asus:wl-330n [2019/09/02 18:24] – broken link fixed tmomas
Line 1: Line 1:
 ====== ASUS WL-330N & WL-330N3G ====== ====== ASUS WL-330N & WL-330N3G ======
 +
 +{{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
  
 **Ralink RT3050F** **Ralink RT3050F**
Line 33: Line 35:
 WL-330N3G Rev 1.20 is also sold as WL-330N. On WL-330N USB port is available but not soldered. Also, there's a few WL-330N3G with H/W version Rev 1.20 which have 32MiB RAM onboard. Installation image is same with WL-330N3G. WL-330N3G Rev 1.20 is also sold as WL-330N. On WL-330N USB port is available but not soldered. Also, there's a few WL-330N3G with H/W version Rev 1.20 which have 32MiB RAM onboard. Installation image is same with WL-330N3G.
  
-===== Info =====+==== Info ====
  
 | **Architecture:** MIPS        | | **Architecture:** MIPS        |
Line 50: Line 52:
  
  
-===== Photos =====+==== Photos ====
  
 {{https://lh4.googleusercontent.com/-nryYV_FTu78/TjVYy6o3a6I/AAAAAAAABmc/MBltGqutLjY/s400/IMG_0264.JPG|PCB front}} {{https://lh4.googleusercontent.com/-nryYV_FTu78/TjVYy6o3a6I/AAAAAAAABmc/MBltGqutLjY/s400/IMG_0264.JPG|PCB front}}
Line 58: Line 60:
  
  
-===== Opening the case =====+==== Opening the case ====
 **Note:** This will void your warranty! **Note:** This will void your warranty!
  
Line 66: Line 68:
 The case can be very difficult to open, but be careful not to destroy the plastic in the process as the case makes up half the body of the Ethernet socket. The case can be very difficult to open, but be careful not to destroy the plastic in the process as the case makes up half the body of the Ethernet socket.
  
-===== Serial =====+==== Serial ====
  
 The serial port on bottom side of PCB, left from USB port. There's two solder pads marked with TX and RX. Be careful when soldering and add drop of glue to prevent pulling fragile pads from pcb.   The serial port on bottom side of PCB, left from USB port. There's two solder pads marked with TX and RX. Be careful when soldering and add drop of glue to prevent pulling fragile pads from pcb.  
Line 79: Line 81:
  
  
-===== JTAG =====+==== JTAG ====
  
 JTAG pins can be seen after removing metal RF shield. Location and number of pins match with Ralink datasheet JTAG info. Functionality of JTAG has not been tested. JTAG pins can be seen after removing metal RF shield. Location and number of pins match with Ralink datasheet JTAG info. Functionality of JTAG has not been tested.
  
  
-====== Installation ======+===== Installation =====
  
 ** Note: ** OpenWrt supports this device since Attitude Adjustment 12.09. ** Note: ** OpenWrt supports this device since Attitude Adjustment 12.09.
Line 92: Line 94:
 ** Note: ** Correct work with HUAWEI HiLink devices avaliable since LEDE 17.01.4. ** Note: ** Correct work with HUAWEI HiLink devices avaliable since LEDE 17.01.4.
  
-===== Installation using console port =====+==== Installation using console port ====
  
   - download a [[http://downloads.openwrt.org/releases/17.01.4/targets/ramips/rt305x/lede-17.01.4-ramips-rt305x-wl-330n3g-squashfs-sysupgrade.bin|stable image]]   - download a [[http://downloads.openwrt.org/releases/17.01.4/targets/ramips/rt305x/lede-17.01.4-ramips-rt305x-wl-330n3g-squashfs-sysupgrade.bin|stable image]]
Line 109: Line 111:
 Recovering should be possible as the bootmanager is not overwritten. Recovering should be possible as the bootmanager is not overwritten.
  
-===== Installation using recovery mode =====+==== Installation using recovery mode ====
  
 ** Note: ** Tested on WL-330N3G. ** Note: ** Tested on WL-330N3G.
Line 135: Line 137:
 </code> Instead of the openwrt or lede image (lede-17.01.4-ramips-rt305x-wl-330n3g-squashfs-sysupgrade.bin) you can upload other images (eg. the original ASUS-Firmware: WL-330NG_1.0.2.0.trx). </code> Instead of the openwrt or lede image (lede-17.01.4-ramips-rt305x-wl-330n3g-squashfs-sysupgrade.bin) you can upload other images (eg. the original ASUS-Firmware: WL-330NG_1.0.2.0.trx).
   - Wait, flashing may take a couple of minutes. Do not power off!   - Wait, flashing may take a couple of minutes. Do not power off!
-  - The device will reboot when flashing is done. If you flashed OpenWrt/LEDE, telnet into 192.168.1.1 and set root password according to [[doc/howto/firstlogin|First Login]].+  - The device will reboot when flashing is done. If you flashed OpenWrt/LEDE, telnet into 192.168.1.1 and set root password according to [[docs:guide-quick-start:factory_installation#check_flash_result|First Login]].
  
 ===== Bootlogs ===== ===== Bootlogs =====
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1