ASUS RT-N12 A1
Supported Versions
Hardware Highlights
Installation
Hardware info
Architecture | MIPS |
---|---|
Vendor | Broadcom |
Bootloader | CFE |
System-On-Chip | Broadcom BCM4716B0KFBG |
CPU Speed | 300MHz |
Flash-Chip | Winbond 25X32VF1G |
Flash size | 4MB |
RAM | Winbond W9425G6EH 32MB SDRAM |
Wireless | Broadcom BCM4329 ? (integrated) |
Ethernet | Broadcom BCM5325EKQMG (4 port switch) |
USB | No |
Serial | Yes |
JTAG | Yes (no header) |
Board images
Serial
Console port J1 uses 3.3 V signaling at speed 115200. Header is pre-installed
J1 | |||
---|---|---|---|
Vcc | RX | TX | GND |
Bootlogs
Stock firmware bootlog
Decompressing...done CFE version 5.10.56.46 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: 五 9月 11 16:02:04 CST 2009 (root@localhost.localdomain) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 131072(0x20000) Found a 4MB ST compatible serial flash et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.46 CPU type 0x19749: 300MHz Tot mem: 32768 KBytes CFE mem: 0x80700000 - 0x8079B670 (636528) Data: 0x80731600 - 0x807346F0 (12528) BSS: 0x807346F0 - 0x80735670 (3968) Heap: 0x80735670 - 0x80799670 (409600) Stack: 0x80799670 - 0x8079B670 (8192) Text: 0x80700000 - 0x807315FC (202236) Device eth0: hwaddr 00-26-18-xx-xx-xx, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Null Rescue Flag. Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null) Loading: TFTP Server. Failed. Could not load :: Timeout occured Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ..... 2758332 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 Linux version 2.6.22 (root@localhost.localdomain) (gcc version 4.1.2) #207 Tue Jan 26 10:37:34 CST 2010 CPU revision is: 00019749 Found a 4MB ST compatible serial flash Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Built 1 zonelists. Total pages: 8128 Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 128 (order: 7, 512 bytes) CPU: BCMb83a rev 0 at 300 MHz Using 150.000 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 29568k/32768k available (2136k kernel code, 3200k reserved, 443k data, 112k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 PCI: no core PCI: Fixing up bus 0 Time: MIPS clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher io scheduler noop registered (default) HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPPoL2TP kernel driver, V0.17 pflash: found no supported devices sflash: squashfs filesystem found at block 1158 Creating 4 MTD partitions on "sflash": 0x00000000-0x00020000 : "boot" 0x00020000-0x003f0000 : "linux" 0x00121894-0x003f0000 : "rootfs" 0x003f0000-0x00400000 : "nvram" GACT probability NOT on Mirror/redirect action on netem: version 1.2 u32 classifier Performance counters on input device check on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (256 buckets, 2048 max) ctnetlink v0.93: registering with nfnetlink. ipt_time loading ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 112k freed Warning: unable to open an initial console. [sighandler]: No more events to be processed, quitting. [cleanup]: Waiting for children. [cleanup]: All children terminated. read from nvram insmod: ip_nat_starcraft.ko: no module by that name found insmod: ipt_NETMAP.ko: no module by that name found emf: module license 'unspecified' taints kernel. eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.46 eth1: Broadcom BCM4329 802.11 Wireless Controller 5.10.56.46 Hit enter to continue...read from nvram waitpid: No child processes insmod: ip_nat_starcraft.ko: no module by that name found waitpid: No child processes insmod: ipt_NETMAP.ko: no module by that name found waitpid: No child processes Algorithmics/MIPS FPU Emulator v1.5 waitpid: No child processes vlan0: Operation not supported vlan0: dev_set_promiscuity(master, 1) device eth0 entered promiscuous mode device vlan0 entered promiscuous mode waitpid: No child processes eth1: Operation not supported eth1: Invalid argument device eth1 entered promiscuous mode waitpid: No child processes br0: port 2(eth1) entering learning state br0: port 1(vlan0) entering learning state br0: topology change detected, propagating br0: port 2(eth1) entering forwarding state br0: topology change detected, propagating br0: port 1(vlan0) entering forwarding state starting... info, udhcp server (v0.9.8) started killall: upnp: no process killed UPnP::upnp_device_attach:br0: attach InternetGatewayDevice.xml killall: eapd: no process killed The inherited fd(3) is closed. cannot get proto entry: No such file or directory cannot get proto entry: No such file or directory UPnP::upnp_init:UPnP daemon is ready to run info, udhcp client (v0.9.8) started eth0: No such process killall: wps_monitor: no process killed waitpid: No child processes killall: wps_ap: no process killed waitpid: No child processes killall: wps_enr: no process killed waitpid: No child processes Debug::sharedkeystr=(null) time.nist.gov: Unknown host waitpid: No child processes # Enable direct rule track test:[101][k] track_flag=0, clean_flag=101, ipaddr=0 track set ok **** clean ip_conntrack 1 time. **** **** clean ip_conntrack 2 time. **** **** clean ip_conntrack 3 time. **** track test:[100][k] track_flag=0, clean_flag=100, ipaddr=0 track set ok Starting full scan! Hit enter to continue...