Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:astoria:arv7510pw22 [2015/09/25 18:15] – ↷ Links adapted because of a move operation tmomastoh:astoria:arv7510pw22 [2021/06/10 13:47] – [Flash Layout] fix addresses (flash is at 0xb) napaalm
Line 1: Line 1:
 +====== Astoria networks ARV7510PW22 ======
  
 +FIXME Please explain the differences / similarities of [[toh:arcadyan:arv7510pw|ARV7510PW]] and ARV7510PW22.
 +===== Supported Versions =====
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,c,c,c,c,c,c
 +filter  : Model=ARV7510PW22
 +----
 +
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Model=ARV7510PW22
 +----
 +
 +===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : l,c,c
 +filter  : Model=ARV7510PW22
 +----
 +
 +  * -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
 +  * -> [[http://foro.seguridadwireless.net/openwrt/%28desarrollo%29-openwrt-en-astoria-arv7510pw22/]] (use google translate for english version)
 +
 +
 +FIXME Please add the installation procedure here.
 +
 +
 +==== Flash Layout ====
 +Please check out the article [[docs:techref:flash.layout]]. It contains an example and a couple of explanations.
 +
 +^  Modified Flash Layout  ^^^^^
 +^ partition   ^ start        ^ end          ^ size      ^ description          ^
 +| mtd0        | 0xb0000000   | 0xb0040000   | 256KB     | u-boot               |
 +| mtd1        | 0xb0040000   | 0xb0060000   | 128KB     | u-boot environment   |
 +| mtd2        | 0xb0060000   | 0xb0fe0000   | 15872KB   | linux                |
 +| mtd3        | 0xb0fe0000   | 0xb1000000   | 128KB     | board_config         |
 +
 +===== Hardware =====
 +==== Info ====
 +| **[[wp>Instruction set|Architecture]]:**    | [[wp>MIPS architecture|MIPS]] | 
 +| **Vendor:** |[[wp>Astoria]] | 
 +| **[[docs:techref:bootloader]]:**     | [[docs:techref:bootloader:brnboot]] | 
 +| **System-On-Chip:**  |[[http://pdf.datasheetarchive.com/indexerfiles/Datasheets-UD3/DSAUD0055683.pdf|Lantiq Danube PSB 50702 E Rev 1.3 or 1.5 (MIPS 24Kec)]]| 
 +| **[[docs:techref:hardware:cpu|CPU]]/Speed:**        | 333 Mhz Dual Core |
 +| **Flash-Chip:** |MX29GL128ELT2I-90G |
 +| **Flash size:** |16 MiB | 
 +| **RAM:** |64 MiB | 
 +| **RAM Chip:** |[[http://www.zentel-europe.com/A4S12D40FTP_v1.1_Zentel.pdf|Zentel A4S12D40FTP-G5]]|
 +| **Wireless:**   | Ralink RT3062F b/g/n 2x2     |
 +| **Ethernet:**   | Atheros AR8216-BH1A          |
 +| **Internet:**   | ADSL2+ (annex A and B)       |
 +| **USB:**        | Yes 3 x 2.0                  |
 +| **Phone:**      | 2x FXS                       |
 +| **Serial:**     | [[#Serial|Yes]]              |
 +| **JTAG:**       | [[#JTAG|Yes]]                |
 +| **Power:**      | external PSU, 15V DC, 1.2A   |
 +
 +==== Photos ====
 +PCB Up:\\
 +{{media:arcadyan:arv7510:arv7510pw22_up.jpg?400}}
 +
 +PCB Down:\\
 +{{media:arcadyan:arv7510:arv7510pw22_down.jpg?400}}
 +
 +==== Opening the case ====
 +**Note:** This will void your warranty!
 +
 +To get to the board you need:
 +
 +  * unscrew 2 Phillips screws underneath the cover,
 +  * pull the upper cover which is connected by click.
 +
 +==== LEDs ====
 +^ Name       ^ Colour   ^ Gpio   ^
 +| Power      | red      | 2      |
 +| Internet   | red      | 4      |
 +| Wifi       | red      | 10     |
 +| 3G         | red      | 15     |
 +| Message    | red      | 20     |
 +
 +==== OTHERS ====
 +^ Name       ^ Type     ^ GPIO   ^
 +| USB power  | out      | 8      |
 +
 +==== Serial ====
 +-> [[docs:techref:hardware:port.serial]].
 +
 +Board voltage is 3.3V so can use usb to serial adapters.\\
 +Pinout:\\
 +{{media:arcadyan:arv7510:arv7510pw22_serial.jpg?300}}
 +
 +=== UART ===
 +{{media:arcadyan:arv7510:arv7510pw22_uart.jpg?300}}\\
 +To enable uart mode, short pins at R80 or connect it to ground (see picture) and connect R65 to 3.3V (serial port vcc). Than you can send u-boot.asc to serial port.\\
 +For example if your serial port is ttyUSB0 than do:
 +"cat u-boot.asc > /dev/ttyUSB0" and wait until u-boot starts.
 +
 +UART mode looks like this:
 +
 +<code>
 +ROM VER: 1.0.3
 +CFG 04
 +Read EEPROMX
 + X
 +UART
 +</code>
 +
 +==== JTAG ====
 +-> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
 +
 +How to connect to the JTAG Port of this specific device:\\
 +**Insert photo of PCB with markings for JTAG port**
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +<WRAP bootlog>
 +<nowiki>ROM VER: 1.0.3
 +CFG 01
 +Readà
 +ROM VER: 1.0.3
 +CFG 01
 +Read EEPROMX
 + X
 +
 +
 +
 +=======================================================================
 +Wireless ADSL Gateway DANUBE Loader v2.00.04 build Jul 20 2010 14:02:27
 +                    Arcadyan Technology Corporation
 +=======================================================================
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +
 +Copying boot params.....DONE
 +
 +
 +Press Space Bar 3 times to enter command mode ...
 +Flash Checking Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +[1] Passed.
 +Image[1] at 0xb0860000, len:2323341, type:0
 +Image[2] at 0xb0a97400, len:400168, type:10
 +Image[3] at 0xb0af9000, len:758651, type:11
 +Image[4] at 0xb0bb2400, len:357917, type:12
 +Image[5] at 0xb0c09c00, len:165868, type:50
 +Image[6] at 0xb0c32800, len:452618, type:90
 +Firmware image at 0, ART image at -1
 +
 +Run-up Normal Firmware...
 +
 +Unzipping firmware [1(6)] at 0x80002000 ... [ZIP 3] [ZIP 1]  done
 +Run-time code running ...
 +
 +In c_entry() function ...
 +install_exception 
 +Co config = 80008483
 +[INIT] Interrupt ...
 +##### _ftext      = 0x80002000
 +##### _fdata      = 0x808EE710
 +##### __bss_start = 0x809C91F8
 +##### end         = 0x838FEFA8
 +allocate_memory_after_end> len 895720, ptr 0x83906fb0
 +##### Backup Data from 0x808EE710 to 0x83906FA8~0x839E1A90 len 895720
 +##### Backup Data completed
 +##### Backup Data verified
 +[GPIO FLOW] SetGpio() Begin ..
 +gptu: totally 6 16-bit timers/counters
 +Init timer = 0
 +[GPIO FLOW] SetGpio() End.
 +[INIT] System Log Pool startup ...
 +[INIT] MTinitialize ..
 +[INIT] usrclk
 +CPU Clock 333333334 Hz
 +mips_counter_frequency:166666667
 +r4k_offset: 00028b0a(166666)
 +init_US_counter : time1 = 260452 , time2 = 32260479, diff 32000027
 +US_counter = 59
 + cnt1 32988439 cnt2 32991207, diff 2768
 +Runtime code version: 00.03.38
 +System startup...
 +[INIT] Memory COLOR 0, 6000000 bytes ..
 +[INIT] Memory COLOR 1, 1048576 bytes ..
 +[INIT] Memory COLOR 2, 8516576 bytes ..
 +danube pci startup...
 +PCI clock 33.3MHz
 +cut-off PCI internal clock
 +DANUBE_GPIO_P1_ALTSEL0=65c7
 +DANUBE_GPIO_P1_ALTSEL1=0
 +DANUBE_GPIO_P1_DIR=41fe
 +[PCI-SCAN] get PCI dev-0e, func-00(0x70), class:0x0280, vid:0x1814, did:0x3592
 +[PCI-SCAN] get PCI dev-0f, func-00(0x78), class:0x0c03, vid:0x1106, did:0x3038
 +[PCI-SCAN] get PCI dev-0f, func-01(0x79), class:0x0c03, vid:0x1106, did:0x3038
 +[PCI-SCAN] get PCI dev-0f, func-02(0x7a), class:0x0c03, vid:0x1106, did:0x3104
 +Scanning bus 00
 +Found 00:70 [1814/3592] 000280 00
 +Found 00:78 [1106/3038] 000c03 00
 +Found 00:79 [1106/3038] 000c03 00
 +Found 00:7a [1106/3104] 000c03 00
 +Fixups for bus 00
 +Bus scan for 00 returning with max=00
 +[pcibios_init] PCI slot 0e, function 00...
 +35921814 04300007 02800000 00008000 18000000 00000000 00000000 00000000 
 +00000000 00000000 ffffffff 35921814 00000000 00000040 00000000 04020100 
 +
 +[pcibios_init] PCI slot 0f, function 00...
 +30381106 02100000 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00001 00000000 00000000 30381106 00000000 00000080 00000000 00000100 
 +
 +[pcibios_init] PCI slot 0f, function 01...
 +30381106 02100000 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00021 00000000 00000000 30381106 00000000 00000080 00000000 00000200 
 +
 +[pcibios_init] PCI slot 0f, function 02...
 +31041106 02100000 0c032065 00801600 18010000 00000000 00000000 00000000 
 +00000000 00000000 00000000 31041106 00000000 00000080 00000000 00000300 
 +
 +interrupt pin 2 not supported!
 +wrong interrupt pin 2
 +interrupt pin 3 not supported!
 +wrong interrupt pin 3
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +Set flash memory layout to Boot Parameters found !!!
 +Bootcode version: v2.00.04
 +Serial number: R153051148
 +Hardware version: 01
 +23.03.2012-13:59:27
 +[BUILD-WPA]: Key:284E38B35
 +[BUILD:PIN] PIN:R153051148, MAC:743170F0C7CC
 +[BUILD-PIN]: PIN:87722352, len=8
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +
 +
 +nLen:98, Magic:0x33343536
 +
 +my CFGVersionMagic = 33343536, old CFGVersionMagic on flash = 33343536
 +my CFGsize = 248192, my CFGDescSize = 41080
 +my Version = 00.03.38, Version on flash= 00.03.38
 +[CONFIG] old cfg version:[00.03.38], [0.0.3.0.38.100]
 +source CFGsize = 248192, CFGDescSize = 41080
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +OldCfgHexSize:13267
 +Unzipping from 814C63F0 to 814BC368 ... [ZIP 2] allocate_memory_after_end> len 8
 +1516, ptr 0x839e1ab0
 +done
 +Uncompressed size = 41078
 +Tail1 : END_III_Config_t
 +
 +Size of Old CFG_DESC is :41078!!!
 +useCfgDesc:1
 +MyCfgHexSize:13267
 +Unzipping from 814B8F7C to 814AEEF4 ... [ZIP 2] done
 +Uncompressed size = 41078
 +My CFGDescSize:41080
 +useCfgDesc:1
 +Tail : END_III_Config_t
 +
 +useCfgDesc:3
 +
 +Restore Config file from ver:00.03.38!!!
 +
 +[CONFIG] DS_Tail:[t_ARV752DPW]
 +[CONFIG] load_config ret=1
 +[updateConfig] flash version:[00.03.38], [0.0.3.0.38.100]
 +[updateConfig] code version:[00.03.38], [0.0.3.0.38.100]
 +##@@!! voip_generate_LACDN> accountidx=0, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=1, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=2, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=3, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=4, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=5, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=6, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=7, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=8, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=9, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +!!! Invalid wireless channel range 0 ~ 0
 +!!! Use default value 1 ~ 13
 +[Config Init] : write UMTS Info to Config
 +[Config Init] : gConfig.umtsVars.APN = ac.vodafone.es
 +[Config Init] : gConfig.ISP_Set[16].Username = vodafone
 +[Config Init] : gConfig.ISP_Set[16].Password = vodafone
 +check_WAN_switch returns -1
 +default route: 0.0.0.0
 +[CheckUSBBackConf]Erase the garbage config in usbBackConf_s
 +BufferInit:
 +BUF_HDR_SZ=192 BUF_ALIGN_SZ=20 BUFFER_OFFSET=448
 +BUF_BUFSZ0=576 BUF_BUFSZ1=4352
 +NUM_OF_B0=0 NUM_OF_B1=2400
 +BUF_POOL0_SZ=0 BUF_POOL1_SZ=10905600
 +sizeof(BUFFER0)=768,sizeof(BUFFER1)=4544
 +*BUF0=0x828308dc *BUF1=0x81dca0bc
 +Altgn *BUF0=0x828308e0 *BUF1=0x81dca0c0
 +End at BUF0:0x828308e0, BUF1:0x828308c0
 +
 +BUF0[0]=0x828308e0 BUF1[0]=0x81dca0c0
 +
 +buffer0 pointer init OK!
 +buffer1 pointer init OK!
 +[qm_lnk_init] CLOCKHZ=1000 ...
 +[qm_lnk_init] add if 3 into QM link 0
 +[qm_lnk_init] add if 4 into QM link 0
 +[qm_lnk_init] add if 5 into QM link 0
 +[qm_cbq_enable] no QM attached
 +[qm_cbq_detach] no QM is attached at link 0
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1025000/100000, ns_per_byte=780487/1000
 +ptime=2000000000/1000, cptime=0/1000, offtime=0/1000
 +New cls: id=0, bw=780 ns/byte, maxd=0 ms,
 +         maxb=32, minb=2, avgpktsz=250, maxpktsz=1600,
 +         offtime=0, parent=0, borrow=0
 +         pri=0, maxidle=31, minidle=-2497,
 +         maxq=96, clsfg=17
 +pkt_avgsz=1600, pkt_maxsz=1600, mtu=1600
 +f=10249/100000, ns_per_byte=78048781/1000
 +ptime=18446744073709551615/1000, cptime=18446744073709551615/1000, offtime=18446
 +744073709551615/1000
 +New cls: id=1, bw=78048 ns/byte, maxd=0 ms,
 +         maxb=16, minb=1, avgpktsz=1600, maxpktsz=1600,
 +         offtime=112078, parent=838fe384, borrow=838fe384
 +         pri=5, maxidle=29864, minidle=-249756,
 +         maxq=48, clsfg=21
 +qm_cbq_attach(): cbqp->cbq_res=105
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1014750/100000, ns_per_byte=788371/1000
 +ptime=2000000000/1000, cptime=0/1000, offtime=0/1000
 +New cls: id=2, bw=788 ns/byte, maxd=0 ms,
 +         maxb=32, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=0, parent=838fe384, borrow=838fe384
 +         pri=5, maxidle=31, minidle=-2522,
 +         maxq=48, clsfg=21
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=3, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=6, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=20
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=4, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=0, maxidle=0, minidle=-4294966,
 +         maxq=96, clsfg=21
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=5, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=1, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=23
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=6, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=2, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=23
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=7, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=3, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=23
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=8, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=4, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=23
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1014750/100000, ns_per_byte=788371/1000
 +ptime=2000000000/1000, cptime=0/1000, offtime=0/1000
 +New cls: id=9, bw=788 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=0, parent=838fcd84, borrow=838fcd84
 +         pri=6, maxidle=31, minidle=-2522,
 +         maxq=48, clsfg=20
 +CLOCKHZ=1000
 +gConfig.Interface[0].IP_Addr = 127.0.0.1
 +gConfig.Interface[0].Subnet_Mask = 255.255.255.255
 +***** [iput_IpLinkUp] ifno=0, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 0 ip = 127.0.0.1
 +
 +gConfig.Interface[1].IP_Addr = 192.168.0.1
 +gConfig.Interface[1].Subnet_Mask = 255.255.255.0
 +ifno=1, vlan=0, vid=1, port_mask=0x1f
 +DANUBE_RCU_RST_STAT Watchdog 0 reset cause flag 0 Watchdog 1 reset cause flag 0
 +DMA g_desc_list=0x814A9CC0
 +danube_sw_chip_init: in MII mode
 +Probe switch chip....Atheros8216 detected
 +init switch chip deriverinit QoS for switch 
 +enter athr_VLANInit
 +[VLAN] port: 0x000f, ifCount=1
 +------->add port 2 to vlan 1
 +------->add port 3 to vlan 1
 +------->add port 4 to vlan 1
 +------->add port 5 to vlan 1
 +mac_0_init: interface 1 registered to VLAN 1, port_mask=1f
 +MAC Address: 74:31:70:f0:c7:cc
 +***** [iput_IpLinkUp] ifno=1, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 1 ip = 192.168.0.1
 +
 +gConfig.Interface[2].IP_Addr = 0.0.0.0
 +gConfig.Interface[2].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=2 irno=7 port=0x00000000
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +===> rt2860_probe
 +PCI: Enabling device 00:0e.0 (0007 -> 0006)
 +pcibios_set_master> lat=0x80
 +--> RTMPAllocAdapterBlock
 +RTMP_ADAPTER_mem : 80c632e8, sizeof(RTMP_ADAPTER) 415344
 +
 +
 +=== pAd = FFFFFFFF80C632E8, size = 415344 ===
 +
 +<-- RTMPAllocAdapterBlock, Status=0
 +pAd->CSRBaseAddress =0xffffffffb8000000
 +AP Driver version-2.2.5.0
 +NVM is EEPROM
 +Allocate a net device with private data size=0!
 +RtmpOSNetDevAttach()--->
 +<---RtmpOSNetDevAttach(), ret=0
 +<=== rt2860_probe
 +***** [iput_IpLinkUp] ifno=2, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 2 ip = 192.168.0.1
 +
 +gConfig.Interface[3].IP_Addr = 0.0.0.0
 +gConfig.Interface[3].Subnet_Mask = 0.0.0.0
 +ppe: ATM init succeeded (firmware version 1.1.0.2.1.13)
 +ATM_UBR
 +Init SAR ifno:3 g_atm_vcc[0] CONN:1 VPI/VCI:0/44
 +MAC Address: 00:1c:ea:cd:33:2a
 +Interface 3 ip = 0.0.0.0
 +
 +gConfig.Interface[4].IP_Addr = 1.1.1.1
 +gConfig.Interface[4].Subnet_Mask = 255.255.255.255
 +ATM_CBR
 +Init SAR ifno:4 g_atm_vcc[1] CONN:2 VPI/VCI:0/34
 +MAC Address: 00:1c:ea:cd:33:2a
 +Interface 4 ip = 1.1.1.1
 +
 +gConfig.Interface[5].IP_Addr = 0.0.0.0
 +gConfig.Interface[5].Subnet_Mask = 0.0.0.0
 +ATM_UBR
 +Init SAR ifno:5 g_atm_vcc[2] CONN:3 VPI/VCI:0/33
 +MAC Address: 00:1c:ea:cd:33:2a
 +Interface 5 ip = 0.0.0.0
 +
 +gConfig.Interface[13].IP_Addr = 0.0.0.0
 +gConfig.Interface[13].Subnet_Mask = 0.0.0.0
 +IFLNK_PPPOE init : (Linkp)ifno = 13 idx = 2
 +IFLNK_PPPOE init : (Driverp)ifno = 13 idx = 3
 +pppInit> set (PPPShutdownRequest[ifno] = 0)
 +[pppoe_init]
 +Interface 13 ip = 0.0.0.0
 +
 +gConfig.Interface[20].IP_Addr = 0.0.0.0
 +gConfig.Interface[20].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=20 irno=7 port=0x00000000
 +***** [iput_IpLinkUp] ifno=20, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 20 ip = 192.168.0.1
 +
 +gConfig.Interface[21].IP_Addr = 0.0.0.0
 +gConfig.Interface[21].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=21 irno=7 port=0x00000000
 +***** [iput_IpLinkUp] ifno=21, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 21 ip = 192.168.0.1
 +
 +gConfig.Interface[22].IP_Addr = 0.0.0.0
 +gConfig.Interface[22].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=22 irno=7 port=0x00000000
 +***** [iput_IpLinkUp] ifno=22, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 22 ip = 192.168.0.1
 +
 +gConfig.Interface[23].IP_Addr = 0.0.0.0
 +gConfig.Interface[23].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=23 irno=7 port=0x00000000
 +***** [iput_IpLinkUp] ifno=23, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 23 ip = 192.168.0.1
 +
 +gConfig.Interface[25].IP_Addr = 0.0.0.0
 +gConfig.Interface[25].Subnet_Mask = 0.0.0.0
 +pppInit> set (PPPShutdownRequest[ifno] = 0)
 +if_umts_init() WAN interface 25, UMTS-COM1: baudrate=115200 
 +if_umts_init() MAC:74:31:70:F0:C7:CD
 +RUNTASK id=2 umtsEventHandleTsk...
 +RUNTASK id=3 umtsEventExeHandleTsk...
 +umtsReceQueueInit() Host controller disable, bypass queue init...
 +RUNTASK id=4 umtsReceQueueTsk...
 +RUNTASK id=5 umtsReceTsk...
 +RUNTASK id=6 umtsWritTsk...
 +Interface 25 ip = 0.0.0.0
 +
 +ruleCheck()> Group: 0,  Error: Useless rule index will be truncated, from idx:1
 +ruleCheck()> Group: 1,  Error: Useless rule index will be truncated, from idx:22
 +ruleCheck()> Group: 2,  Error: Useless rule index will be truncated, from idx:0
 +CBAC rule format check succeed !!
 +reqCBACBuf()> init match pool, Have: 1000
 +Memory Address: 0xffffffff83899f9c ~ 0xffffffff838a0d18
 +reqCBACBuf()> init timeGap pool, Have: 10000
 +Memory Address: 0xffffffff838a0d18 ~ 0xffffffff838d1a6c
 +reqCBACBuf()> init sameHost pool, Have: 2000
 +Memory Address: 0xffffffff838d1a6c ~ 0xffffffff838e148c
 +CBAC rule pool initialized !!
 +[init_if] local_if_mask=0xf80007
 +[init_if] local_wiredif_mask=0x80002
 +[init_if] local_wirelessif_mask=0xf00004
 +[init_if] localorVPN_if_mask=0xf80007
 +Init NAT data structure
 +RUNTASK id=7 if_task if0...
 +RUNTASK id=8 if_task if1...
 +RUNTASK id=9 if_task if2...
 +RUNTASK id=10 if_task if3...
 +RUNTASK id=11 if_task if4...
 +RUNTASK id=12 if_task if5...
 +RUNTASK id=13 if_task if20...
 +RUNTASK id=14 if_task if21...
 +RUNTASK id=15 if_task if22...
 +RUNTASK id=16 if_task if23...
 +RUNTASK id=17 if_task if25...
 +RUNTASK id=18 timer_task...
 +RUNTASK id=19 conn_mgr...
 +RUNTASK id=20 main_8021x...
 +Build Day = Mar 23 2012
 +RUNTASK id=21 saveRandomSeedTask...
 +[VFS_init] Start...
 +[VFS_init] vfsState:1
 +vfs_codepage_init() TimeZone:25, vfs_cp_idx:25, vfs_cp_ID:1
 +fat_codePageInit() TimeZone:25, codePage:Unknown, cPID:1, cpSize:256, toUpSize:0
 +ntfs_codepage timezone:25, lan= 0
 +ntfs_codePageInit() TimeZone:25, codePage:1
 +==[vfs_register_filesystem]============================
 +list size:7,  Method:0x808f1b68
 +  1) Type:0x01, Name:FAT12
 +  2) Type:0x04, Name:FAT16
 +  3) Type:0x06, Name:FAT16
 +  4) Type:0x0b, Name:FAT32
 +  5) Type:0x0c, Name:FAT32
 +  6) Type:0x0e, Name:FAT16
 +  7) Type:0x81, Name:Minix
 +=================================================================
 +[VFS_init] FAT init OK
 +==[vfs_register_filesystem]============================
 +list size:1,  Method:0x808f1d68
 +  1) Type:0x07, Name:NTFS/HPFS
 +=================================================================
 +[VFS_init] NTFS init OK
 +[VFS_init]-[vfs_mount_root] Start...
 +[VFS_init]-[vfs_mount_root] Init <root> OK...
 +[VFS_init]-[vfs_mount_root] Init <dev> OK...
 +[VFS_init]-[vfs_mount_root] Init <mnt> OK...
 +[0-START]=========================================
 +  Node 000,  DIR, MountFlag:0x00
 +[0-END]===========================================
 +  [1-START]=========================================
 +    Node 001,  DIR, MountFlag:0x00
 +  [1-END]===========================================
 +  [1-START]=========================================
 +    Node 002,  DIR, MountFlag:0x00
 +  [1-END]===========================================
 +dump_inode() freeCnt:77, usedCnt:3
 +[USB-INIT] main() ====== call UsbSysInit() ... 
 +[USB] UsbSPoolArray: 836C21DCH ~ 837AA57B, UsbSPool:836C21E0
 +[USB] UsbMPoolArray: 835F1390H ~ 836C1D8F, UsbMPool:835F13A0
 +[USB] UsbLPoolArray: 837B0BACH ~ 838523CB, UsbLPool:837B0BC0
 +[USB] Small  Un-Cached Memory(4953): 836C21E0 ~ 837AA49F
 +[USB] Medium Un-Cached Memory(206): 835F13A0 ~ 836C0D5F
 +[USB] Large  Un-Cached Memory(37): 837B0BC0 ~ 8384DFBF
 +35921814 04300006 02800000 00008000 18000000 00000000 00000000 00000000 
 +00000000 00000000 ffffffff 35921814 00000000 00000040 00000000 04020116 
 +c9cb0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +
 +30381106 02100000 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00001 00000000 00000000 30381106 00000000 00000080 00000000 00000116 
 +00031040 00000000 00000800 00000000 00000000 00000000 00000000 00000000 
 +00000010 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00002000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +pci_find_slot bus 0 devfn 78
 +dev->bus->number 0 dev->devfn 70
 +dev->bus->number 0 dev->devfn 78
 +setUsbPciInfo() cpu_to_usb_addr_shift[0]:0x60000000, usb_to_cpu_addr_shift[0]:0x
 +a0000000
 +usb_pci_probe() Found VIA UHCI-1 device in PCI slot 0x78, function 0, baseAddr:0
 +xbae00000, IRQ:100000
 +30381106 02100000 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00021 00000000 00000000 30381106 00000000 00000080 00000000 00000200 
 +00031040 00000000 00000800 00000000 00000000 00000000 00000000 00000000 
 +00000010 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00002000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +pci_find_slot bus 0 devfn 79
 +dev->bus->number 0 dev->devfn 70
 +dev->bus->number 0 dev->devfn 78
 +dev->bus->number 0 dev->devfn 79
 +setUsbPciInfo() cpu_to_usb_addr_shift[1]:0x60000000, usb_to_cpu_addr_shift[1]:0x
 +a0000000
 +usb_pci_probe() Found VIA UHCI-2 device in PCI slot 0x79, function 1, baseAddr:0
 +xbae00020, IRQ:100000
 +31041106 02100000 0c032065 00801600 18010000 00000000 00000000 00000000 
 +00000000 00000000 00000000 31041106 00000000 00000080 00000000 00000300 
 +000b0000 00000000 090020a0 ffff0000 80005a00 00000000 88880b04 00000033 
 +00012020 00000000 00000001 80000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +pci_find_slot bus 0 devfn 7a
 +dev->bus->number 0 dev->devfn 70
 +dev->bus->number 0 dev->devfn 78
 +dev->bus->number 0 dev->devfn 79
 +dev->bus->number 0 dev->devfn 7a
 +setUsbPciInfo() cpu_to_usb_addr_shift[4]:0x60000000, usb_to_cpu_addr_shift[4]:0x
 +a0000000
 +usb_pci_probe() Found VIA EHCI device in PCI slot 0x7a, function 2, baseAddr:0xb
 +8010000, IRQ:95
 +setUsbPciInfo() cpu_to_usb_addr_shift[5]:0x00000000, usb_to_cpu_addr_shift[5]:0x
 +00000000
 +usb_pci_probe() Found Synopsis OTG, baseAddr:0xbe101000, IRQ:54
 +usb_hcd_init() probe PCI function:4 !!
 +usb_host_power_set() isOn:1
 +usb_host_power_set() Previous power off:0, current time:0
 +usb_host_power_set(1) min time delay:6000, current delay:0
 +usb_host_power_set() Need delay:6500 **********
 +usb_host_power_set(2) min time delay:6000, current delay:0
 +usb_hcd_init() func(0):1
 +localhc_init() install uhci driver(host_drv = 0x8099B674, uhci_driver=0x8099B674
 +).
 +usb_pci_attach_device() Enable PCI device...PCI: Enabling device 00:0f.0 (0000 -
 +> 0001)
 +OK
 +usb_pci_attach_device() Set latency timer...OK
 +usb_pci_attach_device() Set bus master...PCI: Enabling bus mastering for device 
 +00:0f.0
 +pcibios_set_master> lat=0x16
 +OK
 +usb_pci_attach_device() Set VIA-UHCI special parameters...OK
 +usb_pci_attach_device(UHCI) Attach succ...
 +30381106 02100005 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00001 00000000 00000000 30381106 00000000 00000080 00000000 00000116 
 +00030040 00000000 00000800 00000000 00000000 00000000 00000000 00000000 
 +00000010 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00002000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +usb_hcd_init() func(1):1
 +localhc_init() install uhci driver(host_drv = 0x8099B674, uhci_driver=0x8099B674
 +).
 +usb_pci_attach_device() Enable PCI device...PCI: Enabling device 00:0f.1 (0000 -
 +> 0001)
 +OK
 +usb_pci_attach_device() Set latency timer...OK
 +usb_pci_attach_device() Set bus master...PCI: Enabling bus mastering for device 
 +00:0f.1
 +pcibios_set_master> lat=0x16
 +OK
 +usb_pci_attach_device() Set VIA-UHCI special parameters...OK
 +usb_pci_attach_device(UHCI) Attach succ...
 +30381106 02100005 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00021 00000000 00000000 30381106 00000000 00000080 00000000 00000200 
 +00030040 00000000 00000800 00000000 00000000 00000000 00000000 00000000 
 +00000010 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00002000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +usb_hcd_init() func(2):0
 +usb_hcd_init() func(3):0
 +usb_hcd_init() func(4):1
 +localhc_init() install ehci driver(host_drv = 0x8099B648, ehci_driver=0x8099B648
 +).
 +usb_pci_attach_device() Enable PCI device...PCI: Enabling device 00:0f.2 (0000 -
 +> 0002)
 +OK
 +usb_pci_attach_device() Set latency timer...OK
 +usb_pci_attach_device() Set bus master...PCI: Enabling bus mastering for device 
 +00:0f.2
 +pcibios_set_master> lat=0x16
 +OK
 +usb_pci_attach_device() Set write invalidate...OK
 +usb_pci_attach_device() Set VIA-EHCI special parameters...OK
 +usb_pci_attach_device(EHCI) Attach succ...
 +31041106 02100016 0c032065 00801600 18010000 00000000 00000000 00000000 
 +00000000 00000000 00000000 31041106 00000000 00000080 00000000 00000300 
 +000b0000 00000000 290020a0 ffff0000 80005a00 00000000 88880b04 00000033 
 +00012020 00000000 00000001 c0000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +usb_hcd_init() func(5):1
 +localhc_init() install otg driver(host_drv = 0x8099B61C, otg_driver=0x8099B61C).
 +usb_hcd_init() func(6):0
 +usb_hcd_init(): succ.
 +[USB-INIT] main() ====== after call UsbSysInit() 
 +InitCommSys: RESOURCE_BASE = 113, NUMRES = 640
 +InitCommSys: EVENT_BASE = 263, NUMEVT = 768
 +InitCommSys: MAILBOX_BASE = 6, NUMMBX = 64
 +ipsec init
 +RUNTASK id=24 period_task...
 +
 +========== ADSL Modem initialization OK ! ======
 +
 +[Dhcpd_Start]
 +RUNTASK id=25 dhcp_daemon...
 +RUNTASK id=26 dhcp_clt...on interface 3
 +RUNTASK id=27 telnetd_main...
 +main()> usb:1, ftp:0
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +Primary image: 1, flash area 6
 +found signature: 78h 56h 34h 12h
 +ulImgLens=2323341, LENGTH[6]-12=7864308, type:0
 +length checking OK
 +[0]2 find End at 0xFFFFFFFFB0A97000 len=2323341, type=0
 +found signature: 78h 56h 34h 12h
 +ulImgLens=400168, LENGTH[6]-12=7864308, type:10
 +length checking OK
 +[1]2 find End at 0xFFFFFFFFB0AF8C00 len=400168, type=10
 +found signature: 78h 56h 34h 12h
 +ulImgLens=758651, LENGTH[6]-12=7864308, type:11
 +length checking OK
 +[2]2 find End at 0xFFFFFFFFB0BB2000 len=758651, type=11
 +found signature: 78h 56h 34h 12h
 +ulImgLens=357917, LENGTH[6]-12=7864308, type:12
 +length checking OK
 +[3]2 find End at 0xFFFFFFFFB0C09800 len=357917, type=12
 +---[ LZMA head start in 0xFFFFFFFFB0C09C00 ]---
 +found signature: 78h 56h 34h 12h
 +ulImgLens=165868, LENGTH[6]-12=7864308, type:50
 +length checking OK
 +[4]2 find End at 0xFFFFFFFFB0C32400 len=165868, type=50
 +---[ LZMA head start in 0xFFFFFFFFB0C32800 ]---
 +found signature: 78h 56h 34h 12h
 +ulImgLens=452618, LENGTH[6]-12=7864308, type:90
 +length checking OK
 +[5]2 find End at 0xFFFFFFFFB0CA1000 len=452618, type=90
 +Image[1] at 0xB0860000, len=2323341, type=0
 +Image[2] at 0xB0A97400, len=400168, type=10
 +Image[3] at 0xB0AF9000, len=758651, type=11
 +Image[4] at 0xB0BB2400, len=357917, type=12
 +Image[5] at 0xB0C09C00, len=165868, type=50
 +Image[6] at 0xB0C32800, len=452618, type=90
 +[get_web_address] Web-0:  addr:0xb0a97400, len:400168, type:10
 +[get_web_address] Web-1:  addr:0xb0af9000, len:758651, type:11
 +[get_web_address] Web-2:  addr:0xb0bb2400, len:357917, type:12
 +getUnZipFileLength: [ZIP 3]
 +getUnZipFileLength: [ZIP 1]
 +Unzipping from B0A97400 to 83E41000 ... [ZIP 3] [ZIP 2] done
 +Uncompressed size = 716159
 +getUnZipFileLength: [ZIP 3]
 +getUnZipFileLength: [ZIP 1]
 +[absread] flash_init: pfs image found at ffffffffb0bb2400, size is 1856216 bytes
 +Unzipping from B0BB2400 to 83C7BA00 ... [ZIP 3] [ZIP 2] done
 +Uncompressed size = 1856216
 +RUNTASK httpd...
 +RUNTASK id=32 SSLClient ...
 +g_Client_Cert_Array=0x81d30078
 +RUNTASK id=33 dnsproxy...
 +RUNTASK id=34 snmp_task...
 +RUNTASK id=35 rip...
 +RUNTASK id=36 ripout...
 +startNBIOSTask()...
 +RUNTASK id=37 nbios_main...
 +RUNTASK id=38 padmin_task_entry...
 +RUNTASK id=39 dhcpd_mgmt_task...
 +runDDNS() ddns_enable:0, DDNSTaskRun:0, needReRunDDNS:1
 +UPnP task run-up... upnpFunc:1
 +UPNP Device initialize success! slot=40
 +update_device_OUI: OUI_str=743170
 +[0] Allocate mailbox 6
 +[0] Allocate mailbox 7
 +FirstUseDate:0000-00-00T00:00:00
 +RUNTASK id=43 wscmain...
 +RUNTASK id=44 wsc_Send_eap_packet...
 +RUNTASK id=45 wsc_Send_UPNP_packet...
 +RUNTASK id=46 WSC_WaitUserAction_Task...
 +UART RX Input
 +Starting Multitask...
 +
 +rzMemory start: 0x81BD0868, end 0x81D30068, size 1439744[0] Allocate resource 11
 +3, FreeResource = 1
 +fpiclk=83333333, rmc=16, fpiclk/rmc=5208333
 +ifx_ssc_clock = 5208333, baud=2000000
 +ifx_ssc_set_baud: br = 0
 +
 +call ifx_ssc_init() = 0
 +call ifx_ssc_open() = 0
 +SPI_Init!
 +RUNTASK id=49 apAppInit...
 +RUNTASK id=51 pid_cc_err_stats_task...
 +start http redir.
 +RUNTASK id=52 hr_daemon...
 +RUNTASK id=53 hr_misc_daemon...
 +RUNTASK id=54 ncidd_main...,  in run_project_task()
 +enter adsl_disable_annex_j_b43_carrier_set()
 +Danube MEI version:1.00.07
 +Image[1] at 0xB0860000, len=2323341, type=0
 +Image[2] at 0xB0A97400, len=400168, type=10
 +Image[3] at 0xB0AF9000, len=758651, type=11
 +Image[4] at 0xB0BB2400, len=357917, type=12
 +Image[5] at 0xB0C09C00, len=165868, type=50
 +Image[6] at 0xB0C32800, len=452618, type=90
 +[get_datapump_address] Datapump for Annex A0:4, B0:-1, C0:-1
 +[get_datapump_address] Datapump for Annex A1:-1, B1:-1, C1:-1
 +[get_datapump_address] r_img=4, t_img=6
 +Unzip DSP firmware ...
 +Unzipping from B0C09C00 to 834C3000 ... [ZIP 2] xSpeedtsk priority is 80
 +done
 +Uncompressed size = 330216
 +ifno2dot1x_if[2]=0
 +dot1x_wireless_if_mask=0x4
 +fwrite_specialConfigPara() Save random seed:15784863
 +Treat it as AMD compatible flash.
 +[50] Allocate resource 114, FreeResource = 2
 +Reset Duslic High begin
 +erase from location b00a0000. done
 +write length 0x5b0
 +0update_img_hdr = FFFFFFFFA34C3000
 +idx=0 mem_ptr=0xA34C3000 size=65536
 +idx=1 mem_ptr=0xA34D3000 size=65536
 +idx=2 mem_ptr=0xA34E3000 size=65536
 +idx=3 mem_ptr=0xA34F3000 size=65536
 +idx=4 mem_ptr=0xA3503000 size=65536
 +idx=5 mem_ptr=0xA3513000 size=2536
 +init psock cnt=3
 +RUNTASK id=58 AtheroGot MODEM_READY_MSG
 +s_NetTask ...
 +<-- RTMPAllocTxRxRingMemory, Status=0
 +Reset Duslic end
 +IFX TAPI, version 3.7.1.5, (c) 2001-2008 Infineon Technologies AG
 +[21] Allocate mailbox 8
 +TAPI_init_task_queue: enter loop..8
 +[50] Allocate resource 115, FreeResource = 3
 +IFX VMMC device driver, version 1.3.0.5, (c) 2006-2008 Infineon Technologies AG
 +IFX MIPS24KEc MPS driver, version 2.0.0.0, (c) 2006-2008 Infineon Technologies A
 +G
 +ifx_mps_init_structures request_irq 1 146
 +ifx_mps_init_structures request_irq 2 147
 +ifx_mps_init_structures request_irq 3 0 142
 +ifx_mps_init_structures request_irq 3 1 143
 +ifx_mps_init_structures request_irq 3 2 144
 +ifx_mps_init_structures request_irq 3 3 145
 +VMMC_Open : Major 122 Minor 10 
 +IFX_TAPI_Create_Device: ndev = 0, TapiDev 81BCE4E8
 +[50] Allocate resource 116, FreeResource = 4
 +[50] Allocate resource 117, FreeResource = 5
 +[50] Allocate resource 118, FreeResource = 6
 +[50] Allocate resource 119, FreeResource = 7
 +[50] Allocate resource 120, FreeResource = 8
 +[50] Allocate event 263
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +>>>>>>>>>> OS_GetEventNumber: event 263
 +VMMC_AddCaps: CODECS = 0
 +VMMC_AddCaps: CODECS = 0
 +ifx_tapi_Prepare_Ch: nChannel 0
 +[50] Allocate resource 121, FreeResource = 9
 +[50] Allocate resource 122, FreeResource = 10
 +[50] Allocate resource 123, FreeResource = 11
 +VMMC_Prepare_Ch: nChannel = 1
 +[50] Allocate resource 124, FreeResource = 12
 +[50] Allocate event 264
 +>>>>>>>>>> OS_GetEventNumber: event 264
 +ifx_tapi_Prepare_Ch: nChannel 1
 +[50] Allocate resource 125, FreeResource = 13
 +[50] Allocate resource 126, FreeResource = 14
 +[50] Allocate resource 127, FreeResource = 15
 +VMMC_Prepare_Ch: nChannel = 2
 +[50] Allocate resource 128, FreeResource = 16
 +[50] Allocate event 265
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +>>>>>>>>>> OS_GetEventNumber: event 265
 +ifx_tapi_Prepare_Ch: nChannel 2
 +[50] Allocate resource 129, FreeResource = 17
 +[50] Allocate resource 130, FreeResource = 18
 +[50] Allocate resource 131, FreeResource = 19
 +VMMC_Prepare_Ch: nChannel = 3
 +[50] Allocate resource 132, FreeResource = 20
 +[50] Allocate event 266
 +>>>>>>>>>> OS_GetEventNumber: event 266
 +ifx_tapi_Prepare_Ch: nChannel 3
 +[50] Allocate resource 133, FreeResource = 21
 +[50] Allocate resource 134, FreeResource = 22
 +[50] Allocate resource 135, FreeResource = 23
 +VMMC_Prepare_Ch: nChannel = 4
 +[50] Allocate resource 136, FreeResource = 24
 +[50] Allocate event 267
 +>>>>>>>>>> OS_GetEventNumber: event 267
 +ifx_tapi_Prepare_Ch: nChannel 4
 +[50] Allocate resource 137, FreeResource = 25
 +[50] Allocate resource 138, FreeResource = 26
 +[50] Allocate resource 139, FreeResource = 27
 +VMMC_Prepare_Ch: nChannel = 5
 +[50] Allocate resource 140, FreeResource = 28
 +[50] Allocate event 268
 +>>>>>>>>>> OS_GetEventNumber: event 268
 +ifx_tapi_Prepare_Ch: nChannel 5
 +[50] Allocate resource 141, FreeResource = 29
 +[50] Allocate resource 142, FreeResource = 30
 +[50] Allocate resource 143, FreeResource = 31
 +VMMC_Prepare_Ch: nChannel = 6
 +[50] Allocate resource 144, FreeResource = 32
 +[50] Allocate event 269
 +>>>>>>>>>> OS_GetEventNumber: event 269
 +ifx_tapi_Prepare_Ch: nChannel 6
 +[50] Allocate resource 145, FreeResource = 33
 +[50] Allocate resource 146, FreeResource = 34
 +[50] Allocate resource 147, FreeResource = 35
 +VMMC_Prepare_Ch: nChannel = 7
 +[50] Allocate resource 148, FreeResource = 36
 +[50] Allocate event 270
 +>>>>>>>>>> OS_GetEventNumber: event 270
 +ifx_tapi_Prepare_Ch: nChannel 7
 +[50] Allocate resource 149, FreeResource = 37
 +[50] Allocate resource 150, FreeResource = 38
 +[50] Allocate resource 151, FreeResource = 39
 +VMMC_Prepare_Ch: nChannel = 8
 +[50] Allocate resource 152, FreeResource = 40
 +[50] Allocate event 271
 +>>>>>>>>>> OS_GetEventNumber: event 271
 +VMMC_LL_Open, nDev 0, inode 0 mpsCh 1
 +ifx_mps_open, inode 1
 +VMMC_Open --> 81bce4e8
 +VMMC_handle[0] : 81bce4e8
 +VMMC_Open : Major 122 Minor 11 
 +VMMC_LL_Open, nDev 0, inode 1 mpsCh 2
 +ifx_mps_open, inode 2
 +VMMC_Open --> 81bcc178
 +VMMC_handle[1] : 81bcc178
 +VMMC_Open : Major 122 Minor 12 
 +VMMC_LL_Open, nDev 0, inode 2 mpsCh 3
 +ifx_mps_open, inode 3
 +VMMC_Open --> 81bcc5e4
 +VMMC_handle[2] : 81bcc5e4
 +VMMC_Open : Major 122 Minor 13 
 +VMMC_LL_Open, nDev 0, inode 3 mpsCh 4
 +ifx_mps_open, inode 4
 +VMMC_Open --> 81bcca50
 +VMMC_handle[3] : 81bcca50
 +VMMC_Open : Major 122 Minor 14 
 +VMMC_LL_Open, nDev 0, inode 4 mpsCh 5
 +ifx_mps_open, inode 5
 +VMMC_Open --> 81bccebc
 +VMMC_handle[4] : 81bccebc
 +VMMC_Open : Major 122 Minor 15 
 +VMMC_LL_Open, nDev 0, inode 5 mpsCh 6
 +ifx_mps_open, inode 6
 +VMMC_Open --> 81bcd328
 +VMMC_handle[5] : 81bcd328
 +VMMC_Open : Major 122 Minor 16 
 +VMMC_LL_Open, nDev 0, inode 6 mpsCh 7
 +ifx_mps_open, inode 7
 +VMMC_Open --> 81bcd794
 +VMMC_handle[6] : 81bcd794
 +VMMC_Open : Major 122 Minor 17 
 +VMMC_LL_Open, nDev 0, inode 7 mpsCh 8
 +VMMC_Open --> 81bcdc00
 +VMMC_handle[7] : 81bcdc00
 +VMMC_Open : Major 122 Minor 18 
 +VMMC_LL_Open, nDev 0, inode 8 mpsCh 9
 +VMMC_Open --> 81bce06c
 +VMMC_handle[8] : 81bce06c
 +===> 
 +Set PCM I/F 0 VMMC_handle:81bce4e8
 +ifx_mps_ioctl: FIO_MPS_DOWNLOAD...1
 +[get_vcpufirmware_address] DSP firmware: [5 -1], dCnt:1
 +Unzipping from B0C32800 to 82D4B2E8 ... [ZIP 2] Channel=0
 +rtmp_read_wds_from_file() is called !!!
 +rtmp_read_wds_from_file : WDS disabled 
 +Magic No. in Boot Param check OK!!!
 +>>>>>>>>>>>>>WIRELESS Calibration Data Not Ready... Default value applied.
 +Default Data is used !!!
 +sould check E2PROM MAC ?????????????????
 +NICReadEEPROMParameters 882 
 +NICReadEEPROMParameters 945 
 +NICReadEEPROMParameters 970 
 +ADSL> READY
 +done
 +Uncompressed size = 642816
 +IFX_MPS: Download firmware (size 642816 bytes)... [dhcp_clt] enable dhcp client 
 +in interface ATM1[3]
 +[32] SSLClient> SSLClient() run
 +[32] sslc_conf_init> ssl client info:
 +[32] PrivateKey=
 +[32] MyCertificate=
 +[32] CaCertificate=
 +[32] SSL_method=31
 +[32] verify_mode=1
 +[32] cipher_suites=ADH:SHA1:HIGH:EXP
 +[32] tftp_server_ip=140.92.61.131
 +[32] fn_myCerttificate=ServCert.pem
 +[32] fn_privateKey=PrivKey.pem
 +[32] fn_caCertificate=CaCert.pem
 +[32] sslc_conf_init> ssl client info end:
 +PKCS12_PBE_add>
 +PKCS12_PBE_add> support RC4
 +PKCS12_PBE_add> support DES
 +PKCS12_PBE_add> support RC2
 +[32] sslc_conf_init> pCtx=0x81bb20d8 in ssld_conf_init
 +
 +[32] sslc_ctx_reset_cert> re-LoadCACertificate( 3rdCA ) ok!!
 +[32] sslc_ctx_reset_cert> re-LoadCACertificate( 2ndCA ) ok!!
 +[32] sslc_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!!sslc_ctx_reset_cert>
 + this is pkcs12 type certificate
 +
 +[32] sslc_ctx_reset_cert : re-LoadServerCertAndKey() ok!!
 +[32] sslc_conf_init> sslc_conf_init() ok
 +[32] SSLClient> want to bind socket for client application!
 +ok!
 +Version 11.2.5.1.0 up and running...
 +[USBLPT] Printer Initialize Fail : Plug Out !!
 +padmin_task_entry() task running
 +********** upnp_main() Unsupportted UPnP root device:0
 +upnp_main(1-0) Run-up UPnP device IGD...
 +*********************************************
 +****Wi-Fi Simple Config Application***** 
 +Version: Build 2.02.2.DTM1.1, Mar 23 2012 13:56:53
 +*********************************************
 +hr_daemon> port 32769.
 +hr_daemon> ssl port 32770.
 +Init_SSLServer> input listen_protocol=6, nListenPort=32770
 +[52] ssld_conf_init> ssl server info:
 +[52] PrivateKey=
 +[52] MyCertificate=
 +[52] CaCertificate=
 +[52] SSL_method=31
 +[52] verify_mode=0
 +[52] cipher_suites=ADH:SHA1:HIGH:EXP
 +[52] tftp_server_ip=140.92.61.131
 +[52] fn_myCerttificate=ServCert.pem
 +[52] fn_privateKey=PrivKey.pem
 +[52] fn_caCertificate=CaCert.pem
 +[52] ssld_conf_init> ssl server info end:
 +[52] pCtx=0x81b94550 in ssld_conf_init
 +ssld_ctx_reset_cert> this is pkcs12 type certificate
 +
 +[52] ssld_ctx_reset_cert : re-LoadServerCertAndKey() ok!!
 +
 +[52] ssld_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!![52] ssld_conf_init>
 + ssld_conf_init() ok
 +[ncidd]: [ncidd]: <Network Port: 3333>
 +[ncidd]: lan ip=0xffffffffc0a80001
 +[ncidd]: ncidd_nwsk() sndlog_sock = 48
 +[HWLAN] [59] rapi_tmr_task running 
 +uhci_pci_attach: begin ... 
 +ifStrInit()> i:0, dtlStr:[Loop/Loop], rfStr[LB0], type:0, count:1
 +ifStrInit()> i:1, dtlStr:[LAN 1/LAN1], rfStr[L1], type:1, count:1
 +ifStrInit()> i:2, dtlStr:[WLAN1/WLAN1], rfStr[WL1], type:3, count:1
 +ifStrInit()> i:3, dtlStr:[ATM 1/ATM1], rfStr[A1], type:5, count:1
 +ifStrInit()> i:4, dtlStr:[ATM 2/ATM2], rfStr[A2], type:5, count:2
 +ifStrInit()> i:5, dtlStr:[ATM 3/ATM3], rfStr[A3], type:5, count:3
 +ifStrInit()> i:6, dtlStr:[ATM 4/ATM4], rfStr[A4], type:5, count:4
 +ifStrInit()> i:7, dtlStr:[ATM 5/ATM5], rfStr[A5], type:5, count:5
 +ifStrInit()> i:8, dtlStr:[ATM 6/ATM6], rfStr[A6], type:5, count:6
 +ifStrInit()> i:9, dtlStr:[ATM 7/ATM7], rfStr[A7], type:5, count:7
 +ifStrInit()> i:10, dtlStr:[ATM 8/ATM8], rfStr[A8], type:5, count:8
 +ifStrInit()> i:11, dtlStr:[PoE 1/PoE1], rfStr[P1], type:6, count:1
 +ifStrInit()> i:12, dtlStr:[PoE 2/PoE2], rfStr[P2], type:6, count:2
 +ifStrInit()> i:13, dtlStr:[PoE 3/PoE3], rfStr[P3], type:6, count:3
 +ifStrInit()> i:14, dtlStr:[PoE 4/PoE4], rfStr[P4], type:6, count:4
 +ifStrInit()> i:15, dtlStr:[PoE 5/PoE5], rfStr[P5], type:6, count:5
 +ifStrInit()> i:16, dtlStr:[PoE 6/PoE6], rfStr[P6], type:6, count:6
 +ifStrInit()> i:17, dtlStr:[PoE 7/PoE7], rfStr[P7], type:6, count:7
 +ifStrInit()> i:18, dtlStr:[PoE 8/PoE8], rfStr[P8], type:6, count:8
 +ptp Daemon task running
 +ifStrInit()> i:19, dtlStr:[CLONE1/CLONE1], rfStr[CL1], type:9, count:1
 +ifStrInit()> i:20, dtlStr:[WDS1/WDS1], rfStr[WD1], type:8, count:1
 +ifStrInit()> i:21, dtlStr:[WDS2/WDS2], rfStr[WD2], type:8, count:2
 +ifStrInit()> i:22, dtlStr:[WDS3/WDS3], rfStr[WD3], type:8, count:3
 +ifStrInit()> i:23, dtlStr:[WDS4/WDS4], rfStr[WD4], type:8, count:4
 +ifStrInit()> i:24, dtlStr:[/], rfStr[], type:12, count:0
 +lpd Daemon task running
 +[USB ROOTHUB_LOOP] RUNTASK id=62 lpd_main ...
 +[USB] lpd_init() End.
 +printer schedule task running
 +upnp_Init(0) upnpGlobalInit[1]:0
 +SSDP Initialization completed...
 +GenaInit : event_hook is NULL!!
 +
 +>> Parse Service 'urn:schemas-microsoft-com:service:OSInfo:1' : TRUE
 +>> Parse Service 'urn:schemas-upnp-org:service:Layer3Forwarding:1' : TRUE
 +>> Parse Service 'urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1' : TRU
 +E
 +>> Parse Service 'urn:schemas-upnp-org:service:WANEthernetLinkConfig:1' : TRUE
 +>> Parse Service 'urn:schemas-upnp-org:service:WANPPPConnection:1' : TRUE
 +>> Parse Service 'urn:schemas-upnp-org:service:WANIPConnection:1' : TRUE
 +>> Parse Device 'urn:schemas-upnp-org:device:WANConnectionDevice:1' : TRUE
 +>> Parse Device 'urn:schemas-upnp-org:device:WANDevice:1' : TRUE
 +>> Parse Device 'urn:schemas-upnp-org:device:InternetGatewayDevice:1' : TRUE
 +********** upnp_main1() Record pDevRoot[1]:81b7da64
 +
 +>>>> UPNP init successfully ...
 +********** upnp_main() Unsupportted UPnP root device:2
 +upnp_main(3-0) Run-up UPnP device WPS-WCN...
 +upnp_Init(0) upnpGlobalInit[3]:0
 +
 +>> Parse Service 'urn:schemas-wifialliance-org:service:WFAWLANConfig:1' : TRUE
 +>> Parse Device 'urn:schemas-wifialliance-org:device:WFADevice:1' : TRUE
 +********** upnp_main1() Record pDevRoot[3]:81b53640
 +
 +>>>> UPNP init successfully ...
 +********** upnp_main() Unsupportted UPnP root device:4
 +********** upnp_main() Unsupportted UPnP root device:5
 +********** upnp_main() Unsupportted UPnP root device:6
 +uhci_init() UHCI_FRAMELIST_COUNT=1024, alloc size:4096
 +uhci_init() UHCI_FLBASEADDR:0x037f5000, physicalMem:0x037f5000
 +
 +
 +>>>>>> usbd_new_device: adding unit bus:1, addr=1, rev=0100, class=9, subclass=0
 +, protocol=0, maxpacket=64, len=18, speed=2
 +
 +usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 +usbd_open_pipe_intr: ipipe=837AB580 repeat=0 xfer=A3645E20
 +TRAP(coldStart) : send ok!
 +usbd_probe_and_attach,probe 1!
 +uhci_pci_attach: begin ... 
 +uhci_init() UHCI_FRAMELIST_COUNT=1024, alloc size:4096
 +uhci_init() UHCI_FLBASEADDR:0x03824000, physicalMem:0x03824000
 +
 +
 +>>>>>> usbd_new_device: adding unit bus:2, addr=1, rev=0100, class=9, subclass=0
 +, protocol=0, maxpacket=64, len=18, speed=2
 +
 +usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 +usbd_open_pipe_intr: ipipe=837ABA80 repeat=0 xfer=A3647E60
 +usbd_probe_and_attach,probe 1!
 +ehci_pci_attach: begin ... 
 +ehci_pci_attach: ioregs:0xb8010000, irq:95
 +ehci_init() flsize=1024, alloc size:4096
 +ehci_init() EHCI_PERIODICLISTBASE:0x037fd000, physicalMem:0x037fd3c0
 +ehci_init() sqh->physaddr:0x0366e982
 +ehci_init() EHCI_ASYNCLISTADDR:0x0366e980, physicalMem:0x0366e980
 +
 +
 +>>>>>> usbd_new_device: adding unit bus:3, addr=1, rev=0200, class=9, subclass=0
 +, protocol=1, maxpacket=64, len=18, speed=3
 +
 +usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OK
 +usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 +usbd_open_pipe_intr: ipipe=837AC2A0 repeat=0 xfer=A366F340
 +scan channel 1 rssi -71
 +max_rssi[0] -71
 +scan channel 8 rssi -85
 +max_rssi[7] -85
 +scan channel 11 rssi -73
 +max_rssi[10] -73
 +scan channel 11 rssi -18
 +max_rssi[10] -18
 +Dirtyness = 12.1.1.1.1.1.1.13.2.2.13.1.1.
 +APAutoSelectChannel pick up ch#1
 +<==== rt28xx_init, Status=0
 +0x1300 = 00064320
 +ND 2 ???
 +ND 1 ???
 +pAd->VirtualIfCnt 1
 +VMMC_AddCaps: CODECS = 7df
 +[50] Allocate event 272
 +>>>>>>>>>> OS_GetEventNumber: event 272
 +[50] Allocate event 273
 +>>>>>>>>>> OS_GetEventNumber: event 273
 +===> 
 + VMMC_Ioctl: Phone 1 IFX_TAPI_LINE_TYPE ok!
 + VMMC_Ioctl: Phone 1 IFXPHONE_SET_LINEFEED ok!
 +Set PCM I/F 1 VMMC_handle:81bcc178
 +===> 
 + VMMC_Ioctl: Phone 2 IFX_TAPI_LINE_TYPE ok!
 + VMMC_Ioctl: Phone 2 IFXPHONE_SET_LINEFEED ok!
 +Set PCM I/F 2 VMMC_handle:81bcc5e4
 +===> 
 +Set PCM I/F 3 VMMC_handle:81bcca50
 +===> 
 +Set PCM I/F 4 VMMC_handle:81bccebc
 +===> 
 +Set PCM I/F 5 VMMC_handle:81bcd328
 +===> 
 +Set PCM I/F 6 VMMC_handle:81bcd794
 +===> 
 +Set PCM I/F 7 VMMC_handle:81bcdc00
 +===> 
 +Set PCM I/F 8 VMMC_handle:81bce06c
 +Setting HOOK Related Parameters 0
 +Setting HOOKFLASH_TIME min 80 ms max 250 ms
 +Setting HOOKON_TIME min 370 max 370
 +Setting HOOK Related Parameters 1
 +Setting HOOKFLASH_TIME min 80 ms max 250 ms
 +Setting HOOKON_TIME min 370 max 370
 +Setting HOOK Related Parameters 2
 +Setting HOOK Related Parameters 3
 +RUNTASK id=68 VINETIC_DRV_Task...
 +[69] Allocate mailbox 9
 +RUNTASK id=69 VINETIC_T38_Task...
 +RUNTASK id=71 FXO_flash_task...
 +RUNTASK id=70 VOICE_API_task...
 +************** Enable ProDaaCheckInterrupt() detect 5879
 +[htf_dbg]     - OnlineActiveWirless() 1334
 +WirelessMode 9 BasicRate 15
 +AutochannelSelect 0 Channel 0 
 +autoChannel : 1
 +NEW : channel 1, BW 0(20MHZ), EXTCHA 3(BELOW)
 +Set_PreAuth_Proc called, PreAuth=0
 +[signal_1x_reset] ...
 +>>>>>>>>>>>>>>>>>>>>>>tick 6449
 +usbd_probe_and_attach,probe 1!
 +[USB] dwc3884_start() Core id:0, funcIdx:5
 +[USB] dwc3884_start() DWC3884 core version:0x4F54220A, 2.20a, channel:16
 +[USB] dwc3884_reset(Danube) Reset In
 +[USB] dwc3884_reset() DANUBE_RCU_UBSCFG:0xBF203018, var:0x00000400
 +[USB] dwc3884_reset() rstctl:0xBE101010
 +[USB] dwc3884_start() intsts:0xBE101014, var:0x04008829
 +
 +
 +>>>>>> usbd_new_device: adding unit bus:4, addr=1, rev=0200, class=9, subclass=0
 +, protocol=1, maxpacket=64, len=18, speed=3
 +
 +usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OK
 +usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 +usbd_open_pipe_intr: ipipe=837AC8E0 repeat=0 xfer=A3671380
 +Reset Duslic High begin
 +Reset Duslic end
 +ProDAAInitialize: begin now
 +ProDAAInitialize: Line-Side Device Status 0
 +Port 2 sytem-side revision 45, line-side revision 6
 +init_DTMF_data: time 6899
 +force_daa_offhook ch 2 onoff 1 time 6899
 +ProDaaOffhook 0 2 onoff 1
 +CID_Detect CH 2 onoff 0
 +FXO_PolState_DTMFCID --> Disable DTMF CID
 +force_daa_offhook ch 2 onoff 0 time 6958
 +ProDaaOffhook 1 2 onoff 0
 +CID_Detect CH 2 onoff 1
 +FXO_PolState_DTMFCID --> Detect Polarity Changed Enable DTMF CID
 +When * the value is 60000
 +When * the value is 60000
 +When * the value is 60000
 +When * the value is 60000
 +sys_voip_cfg->cpt.reorder = 425@-230;20(0.24/0.24/1)
 +TEL_DRV_TONE_REORDER  duration = 480
 +When * the value is 60000
 +[50] Allocate resource 153, FreeResource = 41
 +[50] Allocate mailbox 10
 +TEL_MGR_Init
 +[50] Allocate resource 154, FreeResource = 42
 +tel_mgr_mutex=154
 +[50] Allocate mailbox 11
 + TEL_DM_Init
 +[50] Allocate resource 155, FreeResource = 43
 +[50] Allocate resource 156, FreeResource = 44
 + TEL_MGR_VoiceChannelInit
 + TEL_MGR_SetVoiceChannel 1
 + !TEL_MGR_SetVoiceChannel: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneEC
 + !TEL_MGR_SetPhoneEC: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneVAD
 + !TEL_MGR_SetPhoneVAD: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneGain
 +Gain Tx -2, Rx -9
 + TEL_MGR_SetPhoneJitter
 + !TEL_MGR_SetPhoneJitter: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetVoiceChannel 2
 + !TEL_MGR_SetVoiceChannel: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneEC
 + !TEL_MGR_SetPhoneEC: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneVAD
 + !TEL_MGR_SetPhoneVAD: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneGain
 +Gain Tx -2, Rx -9
 + TEL_MGR_SetPhoneJitter
 + !TEL_MGR_SetPhoneJitter: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetVoiceChannel 3
 + !TEL_MGR_SetVoiceChannel: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneEC
 + !TEL_MGR_SetPhoneEC: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneVAD
 + !TEL_MGR_SetPhoneVAD: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneGain
 +Gain Tx -2, Rx -9
 + TEL_MGR_SetPhoneJitter
 + !TEL_MGR_SetPhoneJitter: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetVoiceChannel 4
 + !TEL_MGR_SetVoiceChannel: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneEC
 + !TEL_MGR_SetPhoneEC: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneVAD
 + !TEL_MGR_SetPhoneVAD: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneGain
 +usbd_probe_and_attach,probe 1!
 +startExplore() usb explore task run-up, slot:0, tsk_id:49, reason:0
 +usb_hc_install_interrupt() Interrupt disable
 +usb_hc_install_interrupt() Interrupt disable
 +usb_hc_install_interrupt() Install EHCI interrupt 95
 +usb_hc_install_interrupt() Install OTG-1 interrupt 54
 +USB Module: Version 2.0.0 build Mar 23 2012 13:56:31
 +Gain Tx -2, Rx -9
 + TEL_MGR_SetPhoneJitter
 + !TEL_MGR_SetPhoneJitter: TEL_PORT_GetPhoneChannelId fail
 +[50] Allocate resource 157, FreeResource = 45
 +[50] Allocate mailbox 12
 +[73] Allocate resource 158, FreeResource = 46
 +[73] Allocate resource 159, FreeResource = 47
 +[SIP_CORE_Task] sip_core_ready
 +TEL_MGR_SetVoipPhoneEvtHookFunc
 +TEL_MGR_SetVoipPhoneEvtHookFunc
 +TEL_MGR_SetVoipPhoneEvtHookFunc
 +TEL_MGR_SetVoipPhoneEvtHookFunc
 +[50] Allocate resource 160, FreeResource = 48
 +[50] Allocate mailbox 13
 +VOICE_IVR_Init: voice_ivr_channel[0].ivrQueueId = 13
 +[50] Allocate mailbox 14
 +VOICE_IVR_Init: voice_ivr_channel[1].ivrQueueId = 14
 +[50] Allocate mailbox 15
 +VOICE_IVR_Init: voice_ivr_channel[2].ivrQueueId = 15
 +[50] Allocate mailbox 16
 +VOICE_IVR_Init: voice_ivr_channel[3].ivrQueueId = 16
 +[50] Allocate mailbox 17
 +VOICE_IVR_Init: voice_ivr_channel[4].ivrQueueId = 17
 +[50] Allocate mailbox 18
 +VOICE_IVR_Init: voice_ivr_channel[5].ivrQueueId = 18
 +[50] Allocate mailbox 19
 +VOICE_IVR_Init: voice_ivr_channel[6].ivrQueueId = 19
 +[50] Allocate mailbox 20
 +VOICE_IVR_Init: voice_ivr_channel[7].ivrQueueId = 20
 +TEL_MGR_DisableDebug
 +usb_explore_task() Begin ...
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0003)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0003)...
 +[reset_802dot1x] wireless module ready
 +install group key to Mac ASIC ????????????????????????
 +[reset_802dot1x] 802.1Xv2 ready
 +ifno2dot1x_if[2]=0
 +dot1x_wireless_if_mask=0x4
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0003)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0003)...
 +SetscState:scState:2
 +*********************************************
 +***Waiting for Registrar to connect...***
 +*********************************************
 +************** Enable ProDaaCheckInterrupt() detect 8589
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0001)...
 +[reset_802dot1x] wireless module ready
 +install group key to Mac ASIC ????????????????????????
 +[reset_802dot1x] 802.1Xv2 ready
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001</nowiki>
 +</WRAP>\\
 +
 +==== OpenWrt bootlog ====
 +
 +<WRAP bootlog>
 +<nowiki>ROM VER: 1.0.3
 +CFG 01
 +Reaä
 +ROM VER: 1.0.3
 +CFG 01
 +Read EEPROMX
 + X
 +
 +
 +U-Boot 2013.10-openwrt4 (Feb 17 2021 - 08:37:06) ARV7510PW22
 +
 +Board: Arcadyan ARV7510PW22
 +SoC:   Lantiq Danube-S v1.5
 +CPU:   333.333 MHz
 +IO:    166.667 MHz
 +BUS:   83.333 MHz
 +BOOT:  NOR
 +DRAM:  64 MiB
 +Flash: 16 MiB
 +In:    serial
 +Out:   serial
 +Err:   serial
 +Net:   ltq-eth
 +Hit any key to stop autoboot: 
 +## Booting kernel from Legacy Image at 81000000 ...
 +   Image Name:   MIPS OpenWrt Linux-4.14.221
 +   Created:      2021-02-15  15:22:37 UTC
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed)
 +   Data Size:    1819008 Bytes = 1.7 MiB
 +   Load Address: 80002000
 +   Entry Point:  80002000
 +   Verifying Checksum ... OK
 +   Uncompressing Kernel Image ... OK
 +
 +Starting kernel ...
 +
 +[    0.000000] Linux version 4.14.221 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11306-c4a6851c72)) #0 Mon Feb 15 15:22:37 2021
 +[    0.000000] SoC: Danube rev 1.5
 +[    0.000000] bootconsole [early0] enabled
 +[    0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
 +[    0.000000] MIPS: machine is Astoria Networks ARV7510PW22
 +[    0.000000] Determined physical RAM map:
 +[    0.000000]  memory: 04000000 @ 00000000 (usable)
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
 +[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
 +[    0.000000] Zone ranges:
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
 +[    0.000000] random: get_random_bytes called from 0x80570740 with crng_init=0
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
 +[    0.000000] Kernel command line: console=ttyLTQ0,115200
 +[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 +[    0.000000] Writing ErrCtl register=0006ad38
 +[    0.000000] Readback ErrCtl register=0006ad38
 +[    0.000000] Memory: 57884K/65536K available (4722K kernel code, 197K rwdata, 632K rodata, 1216K init, 213K bss, 7652K reserved, 0K cma-reserved)
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 +[    0.000000] NR_IRQS: 256
 +[    0.000000] CPU Clock: 333MHz
 +[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
 +[    0.000020] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
 +[    0.007983] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
 +[    0.054222] pid_max: default: 32768 minimum: 301
 +[    0.059358] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.065923] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.083238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 +[    0.092937] futex hash table entries: 256 (order: -1, 3072 bytes)
 +[    0.099232] pinctrl core: initialized pinctrl subsystem
 +[    0.109849] NET: Registered protocol family 16
 +[    0.123637] pinctrl-xway 1e100b10.pinmux: Init done
 +[    0.130398] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
 +[    0.142862] PCI host bridge /fpi@10000000/pci@e105400 ranges:
 +[    0.148566]  MEM 0x0000000018000000..0x0000000019ffffff
 +[    0.153844]   IO 0x000000001ae00000..0x000000001affffff
 +[    0.217339] usbcore: registered new interface driver usbfs
 +[    0.222977] usbcore: registered new interface driver hub
 +[    0.228403] usbcore: registered new device driver usb
 +[    0.234072] PCI host bridge to bus 0000:00
 +[    0.238126] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
 +[    0.245048] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
 +[    0.251991] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
 +[    0.258845] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
 +[    0.269790] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
 +[    0.276553] pci 0000:00:0f.2: BAR 0: assigned [mem 0x18010000-0x180100ff]
 +[    0.283396] pci 0000:00:0f.0: BAR 4: assigned [io  0x1ae00000-0x1ae0001f]
 +[    0.290253] pci 0000:00:0f.1: BAR 4: assigned [io  0x1ae00020-0x1ae0003f]
 +[    0.309456] clocksource: Switched to clocksource MIPS
 +[    0.317171] NET: Registered protocol family 2
 +[    0.323179] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.330141] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.336531] TCP: Hash tables configured (established 1024 bind 1024)
 +[    0.343223] UDP hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.349046] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.355781] NET: Registered protocol family 1
 +[    0.360223] PCI: Enabling device 0000:00:0f.0 (0000 -> 0001)
 +[    0.365896] PCI: Enabling device 0000:00:0f.1 (0000 -> 0001)
 +[    0.371614] PCI: Enabling device 0000:00:0f.2 (0000 -> 0002)
 +[    0.383580] gptu: totally 6 16-bit timers/counters
 +[    0.388539] gptu: misc_register on minor 63
 +[    0.392686] gptu: succeeded to request irq 126
 +[    0.397191] gptu: succeeded to request irq 127
 +[    0.401708] gptu: succeeded to request irq 128
 +[    0.406217] gptu: succeeded to request irq 129
 +[    0.410730] gptu: succeeded to request irq 130
 +[    0.415244] gptu: succeeded to request irq 131
 +[    0.426530] lantiq,vmmc 1f103000.vmmc: requested GPIO 489
 +[    0.431889] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
 +[    0.439872] Crashlog allocated RAM at address 0x3f00000
 +[    0.449711] workingset: timestamp_bits=30 max_order=14 bucket_order=0
 +[    0.470360] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    0.476138] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    0.515636] io scheduler noop registered
 +[    0.519500] io scheduler deadline registered (default)
 +[    0.527535] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
 +[    0.536508] console [ttyLTQ0] enabled
 +[    0.536508] console [ttyLTQ0] enabled
 +[    0.543611] bootconsole [early0] disabled
 +[    0.543611] bootconsole [early0] disabled
 +[    0.553603] lantiq nor flash device: 01000000 at 10000000
 +[    0.557823] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
 +[    0.566838] Amd/Fujitsu Extended Query Table at 0x0040
 +[    0.571831]   Amd/Fujitsu Extended Query version 1.3.
 +[    0.576703] number of CFI chips: 1
 +[    0.580059] 4 fixed-partitions partitions found on MTD device ltq_nor
 +[    0.586249] Creating 4 MTD partitions on "ltq_nor":
 +[    0.590988] 0x000000000000-0x000000040000 : "uboot"
 +[    0.597704] 0x000000040000-0x000000060000 : "uboot_env"
 +[    0.603342] 0x000000060000-0x000000fe0000 : "firmware"
 +[    0.648428] 2 uimage-fw partitions found on MTD device firmware
 +[    0.652887] 0x000000060000-0x00000021c1c0 : "kernel"
 +[    0.659473] 0x00000021c1c0-0x000000fe0000 : "rootfs"
 +[    0.664823] mtd: device 4 (rootfs) set to be root filesystem
 +[    0.669112] 1 squashfs-split partitions found on MTD device rootfs
 +[    0.675033] 0x000000560000-0x000000fe0000 : "rootfs_data"
 +[    0.682210] 0x000000fe0000-0x000001000000 : "board_config"
 +[    0.692243] libphy: Fixed MDIO Bus: probed
 +[    0.716295] switch0: Atheros AR8216 rev. 1 switch registered on 1e180000.etop-ffffffff
 +[    0.757184] libphy: ltq_mii: probed
 +[    0.798885] Atheros AR8216/AR8236/AR8316 1e180000.etop-ffffffff:00: attached PHY driver [Atheros AR8216/AR8236/AR8316] (mii_bus:phy_addr=1e180000.etop-ffffffff:00, irq=POLL)
 +[    0.815328] wdt 1f8803f0.watchdog: Init done
 +[    0.823222] NET: Registered protocol family 10
 +[    0.839773] Segment Routing with IPv6
 +[    0.842195] NET: Registered protocol family 17
 +[    0.846439] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
 +[    0.858917] 8021q: 802.1Q VLAN Support v1.8
 +[    0.873148] USB_VBUS: disabling
 +[    0.885050] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
 +[    0.898257] Freeing unused kernel memory: 1216K
 +[    0.901273] This architecture does not have kernel memory protection.
 +[    1.161510] random: fast init done
 +[    2.535984] init: Console is alive
 +[    2.538521] init: - watchdog -
 +[    5.126263] kmodloader: loading kernel modules from /etc/modules-boot.d/*
 +[    5.397301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +[    5.405099] ehci-platform: EHCI generic platform driver
 +[    5.411397] ehci-pci: EHCI PCI platform driver
 +[    5.414747] ehci-pci 0000:00:0f.2: EHCI Host Controller
 +[    5.419573] ehci-pci 0000:00:0f.2: new USB bus registered, assigned bus number 1
 +[    5.426870] ehci-pci 0000:00:0f.2: irq 135, io mem 0x18010000
 +[    5.445560] ehci-pci 0000:00:0f.2: USB 2.0 started, EHCI 1.00
 +[    5.451752] hub 1-0:1.0: USB hub found
 +[    5.454987] hub 1-0:1.0: 4 ports detected
 +[    5.463976] uhci_hcd: USB Universal Host Controller Interface driver
 +[    5.469152] uhci_hcd 0000:00:0f.0: UHCI Host Controller
 +[    5.473994] uhci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
 +[    5.481173] uhci_hcd 0000:00:0f.0: irq 135, io base 0x1ae00000
 +[    5.489655] hub 2-0:1.0: USB hub found
 +[    5.492699] hub 2-0:1.0: 2 ports detected
 +[    5.497582] uhci_hcd 0000:00:0f.1: UHCI Host Controller
 +[    5.501351] uhci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
 +[    5.508606] uhci_hcd 0000:00:0f.1: irq 135, io base 0x1ae00020
 +[    5.517857] hub 3-0:1.0: USB hub found
 +[    5.520940] hub 3-0:1.0: 2 ports detected
 +[    5.534977] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found, using dummy regulator
 +[    5.541938] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found, using dummy regulator
 +[    5.550073] dwc2 1e101000.usb: dwc2_core_reset() HANG! Soft Reset GRSTCTL=80000001
 +[    5.694017] dwc2 1e101000.usb: DWC OTG Controller
 +[    5.697310] dwc2 1e101000.usb: new USB bus registered, assigned bus number 4
 +[    5.704217] dwc2 1e101000.usb: irq 62, io mem 0x1e101000
 +[    5.712310] hub 4-0:1.0: USB hub found
 +[    5.715497] hub 4-0:1.0: 1 port detected
 +[    5.723305] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
 +[    5.731800] init: - preinit -
 +[    7.364368] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +[    7.396778] random: procd: uninitialized urandom read (4 bytes read)
 +Press the [f] key and hit [enter] to enter failsafe mode
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
 +[    8.393815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 +[   10.981360] jffs2: notice: (472) jffs2_build_xattr_subsystem: complete building xattr subsystem, 8 of xdatum (0 unchecked, 6 orphan) and 10 of xref (6 dead, 0 orphan) found.
 +[   10.998148] mount_root: switching to jffs2 overlay
 +[   11.044543] overlayfs: upper fs does not support tmpfile.
 +[   11.061783] urandom-seed: Seeding with /etc/urandom.seed
 +[   11.489329] procd: - early -
 +[   11.491085] procd: - watchdog -
 +[   12.274691] procd: - watchdog -
 +[   12.277267] procd: - ubus -
 +[   12.503333] random: ubusd: uninitialized urandom read (4 bytes read)
 +[   12.512076] random: ubusd: uninitialized urandom read (4 bytes read)
 +[   12.517948] random: ubusd: uninitialized urandom read (4 bytes read)
 +[   12.526552] procd: - init -
 +Please press Enter to activate this console.
 +[   13.603349] urandom_read: 5 callbacks suppressed
 +[   13.603367] random: jshn: uninitialized urandom read (4 bytes read)
 +[   14.189904] kmodloader: loading kernel modules from /etc/modules.d/*
 +[   14.204982] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
 +[   14.235398] Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
 +[   14.263741] NET: Registered protocol family 8
 +[   14.266685] NET: Registered protocol family 20
 +[   14.297124] PPP generic driver version 2.4.2
 +[   14.329374] ip6_tables: (C) 2000-2006 Netfilter Core Team
 +[   14.357620] IFX MEI Version 5.00.00
 +[   14.383872] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
 +[   14.421935] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b
 +[   14.428104] Backport generated by backports.git v4.19.161-1-0-g4bb568fe
 +[   14.470697] Lantiq MIPS24KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
 +[   14.477899] request_timer(3, 0x000001AE, 1)...
 +[   14.477934] successful!
 +[   14.484765] Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
 +[   14.528150] ip_tables: (C) 2000-2006 Netfilter Core Team
 +[   14.558740] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
 +[   14.714804] NET: Registered protocol family 24
 +[   14.774885] xt_time: kernel timezone is -0000
 +[   15.144059] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
 +[   15.149181] rt2800pci 0000:00:0e.0: loaded eeprom from mtd device "board_config"
 +[   15.155453] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
 +[   15.162977] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
 +[   15.333868] kmodloader: done loading kernel modules from /etc/modules.d/*
 +[   15.508819] urngd: v1.0.2 started.
 +[   16.519866] random: crng init done
 +[   43.785710] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +[   43.834560] br-lan: port 1(eth0.1) entered blocking state
 +[   43.838544] br-lan: port 1(eth0.1) entered disabled state
 +[   43.844442] device eth0.1 entered promiscuous mode
 +[   43.848407] device eth0 entered promiscuous mode
 +[   43.909912] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
 +[   44.914149] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 +[   44.919992] br-lan: port 1(eth0.1) entered blocking state
 +[   44.924227] br-lan: port 1(eth0.1) entered forwarding state
 +[   44.930646] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready</nowiki>
 +</WRAP>\\
 +
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>FastEthernet 4Port USB ralink rt3062 64RAM 16Flash MIPS MIPS32 24K ADSL2+ lantiq danube fxo}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1