Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:astoria:arv7510pw22 [2015/05/06 10:46] – fix link theoradicustoh:astoria:arv7510pw22 [2021/06/10 13:47] – [Flash Layout] fix addresses (flash is at 0xb) napaalm
Line 1: Line 1:
 +====== Astoria networks ARV7510PW22 ======
  
 +FIXME Please explain the differences / similarities of [[toh:arcadyan:arv7510pw|ARV7510PW]] and ARV7510PW22.
 +===== Supported Versions =====
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,c,c,c,c,c,c
 +filter  : Model=ARV7510PW22
 +----
 +
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Model=ARV7510PW22
 +----
 +
 +===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : l,c,c
 +filter  : Model=ARV7510PW22
 +----
 +
 +  * -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
 +  * -> [[http://foro.seguridadwireless.net/openwrt/%28desarrollo%29-openwrt-en-astoria-arv7510pw22/]] (use google translate for english version)
 +
 +
 +FIXME Please add the installation procedure here.
 +
 +
 +==== Flash Layout ====
 +Please check out the article [[docs:techref:flash.layout]]. It contains an example and a couple of explanations.
 +
 +^  Modified Flash Layout  ^^^^^
 +^ partition   ^ start        ^ end          ^ size      ^ description          ^
 +| mtd0        | 0xb0000000   | 0xb0040000   | 256KB     | u-boot               |
 +| mtd1        | 0xb0040000   | 0xb0060000   | 128KB     | u-boot environment   |
 +| mtd2        | 0xb0060000   | 0xb0fe0000   | 15872KB   | linux                |
 +| mtd3        | 0xb0fe0000   | 0xb1000000   | 128KB     | board_config         |
 +
 +===== Hardware =====
 +==== Info ====
 +| **[[wp>Instruction set|Architecture]]:**    | [[wp>MIPS architecture|MIPS]] | 
 +| **Vendor:** |[[wp>Astoria]] | 
 +| **[[docs:techref:bootloader]]:**     | [[docs:techref:bootloader:brnboot]] | 
 +| **System-On-Chip:**  |[[http://pdf.datasheetarchive.com/indexerfiles/Datasheets-UD3/DSAUD0055683.pdf|Lantiq Danube PSB 50702 E Rev 1.3 or 1.5 (MIPS 24Kec)]]| 
 +| **[[docs:techref:hardware:cpu|CPU]]/Speed:**        | 333 Mhz Dual Core |
 +| **Flash-Chip:** |MX29GL128ELT2I-90G |
 +| **Flash size:** |16 MiB | 
 +| **RAM:** |64 MiB | 
 +| **RAM Chip:** |[[http://www.zentel-europe.com/A4S12D40FTP_v1.1_Zentel.pdf|Zentel A4S12D40FTP-G5]]|
 +| **Wireless:**   | Ralink RT3062F b/g/n 2x2     |
 +| **Ethernet:**   | Atheros AR8216-BH1A          |
 +| **Internet:**   | ADSL2+ (annex A and B)       |
 +| **USB:**        | Yes 3 x 2.0                  |
 +| **Phone:**      | 2x FXS                       |
 +| **Serial:**     | [[#Serial|Yes]]              |
 +| **JTAG:**       | [[#JTAG|Yes]]                |
 +| **Power:**      | external PSU, 15V DC, 1.2A   |
 +
 +==== Photos ====
 +PCB Up:\\
 +{{media:arcadyan:arv7510:arv7510pw22_up.jpg?400}}
 +
 +PCB Down:\\
 +{{media:arcadyan:arv7510:arv7510pw22_down.jpg?400}}
 +
 +==== Opening the case ====
 +**Note:** This will void your warranty!
 +
 +To get to the board you need:
 +
 +  * unscrew 2 Phillips screws underneath the cover,
 +  * pull the upper cover which is connected by click.
 +
 +==== LEDs ====
 +^ Name       ^ Colour   ^ Gpio   ^
 +| Power      | red      | 2      |
 +| Internet   | red      | 4      |
 +| Wifi       | red      | 10     |
 +| 3G         | red      | 15     |
 +| Message    | red      | 20     |
 +
 +==== OTHERS ====
 +^ Name       ^ Type     ^ GPIO   ^
 +| USB power  | out      | 8      |
 +
 +==== Serial ====
 +-> [[docs:techref:hardware:port.serial]].
 +
 +Board voltage is 3.3V so can use usb to serial adapters.\\
 +Pinout:\\
 +{{media:arcadyan:arv7510:arv7510pw22_serial.jpg?300}}
 +
 +=== UART ===
 +{{media:arcadyan:arv7510:arv7510pw22_uart.jpg?300}}\\
 +To enable uart mode, short pins at R80 or connect it to ground (see picture) and connect R65 to 3.3V (serial port vcc). Than you can send u-boot.asc to serial port.\\
 +For example if your serial port is ttyUSB0 than do:
 +"cat u-boot.asc > /dev/ttyUSB0" and wait until u-boot starts.
 +
 +UART mode looks like this:
 +
 +<code>
 +ROM VER: 1.0.3
 +CFG 04
 +Read EEPROMX
 + X
 +UART
 +</code>
 +
 +==== JTAG ====
 +-> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
 +
 +How to connect to the JTAG Port of this specific device:\\
 +**Insert photo of PCB with markings for JTAG port**
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +<WRAP bootlog>
 +<nowiki>ROM VER: 1.0.3
 +CFG 01
 +Readà
 +ROM VER: 1.0.3
 +CFG 01
 +Read EEPROMX
 + X
 +
 +
 +
 +=======================================================================
 +Wireless ADSL Gateway DANUBE Loader v2.00.04 build Jul 20 2010 14:02:27
 +                    Arcadyan Technology Corporation
 +=======================================================================
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +
 +Copying boot params.....DONE
 +
 +
 +Press Space Bar 3 times to enter command mode ...
 +Flash Checking Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +[1] Passed.
 +Image[1] at 0xb0860000, len:2323341, type:0
 +Image[2] at 0xb0a97400, len:400168, type:10
 +Image[3] at 0xb0af9000, len:758651, type:11
 +Image[4] at 0xb0bb2400, len:357917, type:12
 +Image[5] at 0xb0c09c00, len:165868, type:50
 +Image[6] at 0xb0c32800, len:452618, type:90
 +Firmware image at 0, ART image at -1
 +
 +Run-up Normal Firmware...
 +
 +Unzipping firmware [1(6)] at 0x80002000 ... [ZIP 3] [ZIP 1]  done
 +Run-time code running ...
 +
 +In c_entry() function ...
 +install_exception 
 +Co config = 80008483
 +[INIT] Interrupt ...
 +##### _ftext      = 0x80002000
 +##### _fdata      = 0x808EE710
 +##### __bss_start = 0x809C91F8
 +##### end         = 0x838FEFA8
 +allocate_memory_after_end> len 895720, ptr 0x83906fb0
 +##### Backup Data from 0x808EE710 to 0x83906FA8~0x839E1A90 len 895720
 +##### Backup Data completed
 +##### Backup Data verified
 +[GPIO FLOW] SetGpio() Begin ..
 +gptu: totally 6 16-bit timers/counters
 +Init timer = 0
 +[GPIO FLOW] SetGpio() End.
 +[INIT] System Log Pool startup ...
 +[INIT] MTinitialize ..
 +[INIT] usrclk
 +CPU Clock 333333334 Hz
 +mips_counter_frequency:166666667
 +r4k_offset: 00028b0a(166666)
 +init_US_counter : time1 = 260452 , time2 = 32260479, diff 32000027
 +US_counter = 59
 + cnt1 32988439 cnt2 32991207, diff 2768
 +Runtime code version: 00.03.38
 +System startup...
 +[INIT] Memory COLOR 0, 6000000 bytes ..
 +[INIT] Memory COLOR 1, 1048576 bytes ..
 +[INIT] Memory COLOR 2, 8516576 bytes ..
 +danube pci startup...
 +PCI clock 33.3MHz
 +cut-off PCI internal clock
 +DANUBE_GPIO_P1_ALTSEL0=65c7
 +DANUBE_GPIO_P1_ALTSEL1=0
 +DANUBE_GPIO_P1_DIR=41fe
 +[PCI-SCAN] get PCI dev-0e, func-00(0x70), class:0x0280, vid:0x1814, did:0x3592
 +[PCI-SCAN] get PCI dev-0f, func-00(0x78), class:0x0c03, vid:0x1106, did:0x3038
 +[PCI-SCAN] get PCI dev-0f, func-01(0x79), class:0x0c03, vid:0x1106, did:0x3038
 +[PCI-SCAN] get PCI dev-0f, func-02(0x7a), class:0x0c03, vid:0x1106, did:0x3104
 +Scanning bus 00
 +Found 00:70 [1814/3592] 000280 00
 +Found 00:78 [1106/3038] 000c03 00
 +Found 00:79 [1106/3038] 000c03 00
 +Found 00:7a [1106/3104] 000c03 00
 +Fixups for bus 00
 +Bus scan for 00 returning with max=00
 +[pcibios_init] PCI slot 0e, function 00...
 +35921814 04300007 02800000 00008000 18000000 00000000 00000000 00000000 
 +00000000 00000000 ffffffff 35921814 00000000 00000040 00000000 04020100 
 +
 +[pcibios_init] PCI slot 0f, function 00...
 +30381106 02100000 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00001 00000000 00000000 30381106 00000000 00000080 00000000 00000100 
 +
 +[pcibios_init] PCI slot 0f, function 01...
 +30381106 02100000 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00021 00000000 00000000 30381106 00000000 00000080 00000000 00000200 
 +
 +[pcibios_init] PCI slot 0f, function 02...
 +31041106 02100000 0c032065 00801600 18010000 00000000 00000000 00000000 
 +00000000 00000000 00000000 31041106 00000000 00000080 00000000 00000300 
 +
 +interrupt pin 2 not supported!
 +wrong interrupt pin 2
 +interrupt pin 3 not supported!
 +wrong interrupt pin 3
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +Set flash memory layout to Boot Parameters found !!!
 +Bootcode version: v2.00.04
 +Serial number: R153051148
 +Hardware version: 01
 +23.03.2012-13:59:27
 +[BUILD-WPA]: Key:284E38B35
 +[BUILD:PIN] PIN:R153051148, MAC:743170F0C7CC
 +[BUILD-PIN]: PIN:87722352, len=8
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +
 +
 +nLen:98, Magic:0x33343536
 +
 +my CFGVersionMagic = 33343536, old CFGVersionMagic on flash = 33343536
 +my CFGsize = 248192, my CFGDescSize = 41080
 +my Version = 00.03.38, Version on flash= 00.03.38
 +[CONFIG] old cfg version:[00.03.38], [0.0.3.0.38.100]
 +source CFGsize = 248192, CFGDescSize = 41080
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +OldCfgHexSize:13267
 +Unzipping from 814C63F0 to 814BC368 ... [ZIP 2] allocate_memory_after_end> len 8
 +1516, ptr 0x839e1ab0
 +done
 +Uncompressed size = 41078
 +Tail1 : END_III_Config_t
 +
 +Size of Old CFG_DESC is :41078!!!
 +useCfgDesc:1
 +MyCfgHexSize:13267
 +Unzipping from 814B8F7C to 814AEEF4 ... [ZIP 2] done
 +Uncompressed size = 41078
 +My CFGDescSize:41080
 +useCfgDesc:1
 +Tail : END_III_Config_t
 +
 +useCfgDesc:3
 +
 +Restore Config file from ver:00.03.38!!!
 +
 +[CONFIG] DS_Tail:[t_ARV752DPW]
 +[CONFIG] load_config ret=1
 +[updateConfig] flash version:[00.03.38], [0.0.3.0.38.100]
 +[updateConfig] code version:[00.03.38], [0.0.3.0.38.100]
 +##@@!! voip_generate_LACDN> accountidx=0, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=1, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=2, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=3, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=4, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=5, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=6, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=7, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=8, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +##@@!! voip_generate_LACDN> accountidx=9, outboundProxy = 
 +##@@!! userId = 
 +##@@!! local_area = 
 +##@@!! destination_number = 
 +!!! Invalid wireless channel range 0 ~ 0
 +!!! Use default value 1 ~ 13
 +[Config Init] : write UMTS Info to Config
 +[Config Init] : gConfig.umtsVars.APN = ac.vodafone.es
 +[Config Init] : gConfig.ISP_Set[16].Username = vodafone
 +[Config Init] : gConfig.ISP_Set[16].Password = vodafone
 +check_WAN_switch returns -1
 +default route: 0.0.0.0
 +[CheckUSBBackConf]Erase the garbage config in usbBackConf_s
 +BufferInit:
 +BUF_HDR_SZ=192 BUF_ALIGN_SZ=20 BUFFER_OFFSET=448
 +BUF_BUFSZ0=576 BUF_BUFSZ1=4352
 +NUM_OF_B0=0 NUM_OF_B1=2400
 +BUF_POOL0_SZ=0 BUF_POOL1_SZ=10905600
 +sizeof(BUFFER0)=768,sizeof(BUFFER1)=4544
 +*BUF0=0x828308dc *BUF1=0x81dca0bc
 +Altgn *BUF0=0x828308e0 *BUF1=0x81dca0c0
 +End at BUF0:0x828308e0, BUF1:0x828308c0
 +
 +BUF0[0]=0x828308e0 BUF1[0]=0x81dca0c0
 +
 +buffer0 pointer init OK!
 +buffer1 pointer init OK!
 +[qm_lnk_init] CLOCKHZ=1000 ...
 +[qm_lnk_init] add if 3 into QM link 0
 +[qm_lnk_init] add if 4 into QM link 0
 +[qm_lnk_init] add if 5 into QM link 0
 +[qm_cbq_enable] no QM attached
 +[qm_cbq_detach] no QM is attached at link 0
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1025000/100000, ns_per_byte=780487/1000
 +ptime=2000000000/1000, cptime=0/1000, offtime=0/1000
 +New cls: id=0, bw=780 ns/byte, maxd=0 ms,
 +         maxb=32, minb=2, avgpktsz=250, maxpktsz=1600,
 +         offtime=0, parent=0, borrow=0
 +         pri=0, maxidle=31, minidle=-2497,
 +         maxq=96, clsfg=17
 +pkt_avgsz=1600, pkt_maxsz=1600, mtu=1600
 +f=10249/100000, ns_per_byte=78048781/1000
 +ptime=18446744073709551615/1000, cptime=18446744073709551615/1000, offtime=18446
 +744073709551615/1000
 +New cls: id=1, bw=78048 ns/byte, maxd=0 ms,
 +         maxb=16, minb=1, avgpktsz=1600, maxpktsz=1600,
 +         offtime=112078, parent=838fe384, borrow=838fe384
 +         pri=5, maxidle=29864, minidle=-249756,
 +         maxq=48, clsfg=21
 +qm_cbq_attach(): cbqp->cbq_res=105
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1014750/100000, ns_per_byte=788371/1000
 +ptime=2000000000/1000, cptime=0/1000, offtime=0/1000
 +New cls: id=2, bw=788 ns/byte, maxd=0 ms,
 +         maxb=32, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=0, parent=838fe384, borrow=838fe384
 +         pri=5, maxidle=31, minidle=-2522,
 +         maxq=48, clsfg=21
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=3, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=6, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=20
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=4, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=0, maxidle=0, minidle=-4294966,
 +         maxq=96, clsfg=21
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=5, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=1, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=23
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=6, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=2, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=23
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=7, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=3, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=23
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1/100000, ns_per_byte=4294967295/1000
 +[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT o
 +verflow
 +ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=184467440737095
 +51615/1000
 +New cls: id=8, bw=1342177 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=1366279, parent=838fcd84, borrow=838fcd84
 +         pri=4, maxidle=0, minidle=-4294966,
 +         maxq=48, clsfg=23
 +pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
 +f=1014750/100000, ns_per_byte=788371/1000
 +ptime=2000000000/1000, cptime=0/1000, offtime=0/1000
 +New cls: id=9, bw=788 ns/byte, maxd=0 ms,
 +         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
 +         offtime=0, parent=838fcd84, borrow=838fcd84
 +         pri=6, maxidle=31, minidle=-2522,
 +         maxq=48, clsfg=20
 +CLOCKHZ=1000
 +gConfig.Interface[0].IP_Addr = 127.0.0.1
 +gConfig.Interface[0].Subnet_Mask = 255.255.255.255
 +***** [iput_IpLinkUp] ifno=0, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 0 ip = 127.0.0.1
 +
 +gConfig.Interface[1].IP_Addr = 192.168.0.1
 +gConfig.Interface[1].Subnet_Mask = 255.255.255.0
 +ifno=1, vlan=0, vid=1, port_mask=0x1f
 +DANUBE_RCU_RST_STAT Watchdog 0 reset cause flag 0 Watchdog 1 reset cause flag 0
 +DMA g_desc_list=0x814A9CC0
 +danube_sw_chip_init: in MII mode
 +Probe switch chip....Atheros8216 detected
 +init switch chip deriverinit QoS for switch 
 +enter athr_VLANInit
 +[VLAN] port: 0x000f, ifCount=1
 +------->add port 2 to vlan 1
 +------->add port 3 to vlan 1
 +------->add port 4 to vlan 1
 +------->add port 5 to vlan 1
 +mac_0_init: interface 1 registered to VLAN 1, port_mask=1f
 +MAC Address: 74:31:70:f0:c7:cc
 +***** [iput_IpLinkUp] ifno=1, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 1 ip = 192.168.0.1
 +
 +gConfig.Interface[2].IP_Addr = 0.0.0.0
 +gConfig.Interface[2].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=2 irno=7 port=0x00000000
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +pci_find_slot bus 0 devfn 70
 +dev->bus->number 0 dev->devfn 70
 +===> rt2860_probe
 +PCI: Enabling device 00:0e.0 (0007 -> 0006)
 +pcibios_set_master> lat=0x80
 +--> RTMPAllocAdapterBlock
 +RTMP_ADAPTER_mem : 80c632e8, sizeof(RTMP_ADAPTER) 415344
 +
 +
 +=== pAd = FFFFFFFF80C632E8, size = 415344 ===
 +
 +<-- RTMPAllocAdapterBlock, Status=0
 +pAd->CSRBaseAddress =0xffffffffb8000000
 +AP Driver version-2.2.5.0
 +NVM is EEPROM
 +Allocate a net device with private data size=0!
 +RtmpOSNetDevAttach()--->
 +<---RtmpOSNetDevAttach(), ret=0
 +<=== rt2860_probe
 +***** [iput_IpLinkUp] ifno=2, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 2 ip = 192.168.0.1
 +
 +gConfig.Interface[3].IP_Addr = 0.0.0.0
 +gConfig.Interface[3].Subnet_Mask = 0.0.0.0
 +ppe: ATM init succeeded (firmware version 1.1.0.2.1.13)
 +ATM_UBR
 +Init SAR ifno:3 g_atm_vcc[0] CONN:1 VPI/VCI:0/44
 +MAC Address: 00:1c:ea:cd:33:2a
 +Interface 3 ip = 0.0.0.0
 +
 +gConfig.Interface[4].IP_Addr = 1.1.1.1
 +gConfig.Interface[4].Subnet_Mask = 255.255.255.255
 +ATM_CBR
 +Init SAR ifno:4 g_atm_vcc[1] CONN:2 VPI/VCI:0/34
 +MAC Address: 00:1c:ea:cd:33:2a
 +Interface 4 ip = 1.1.1.1
 +
 +gConfig.Interface[5].IP_Addr = 0.0.0.0
 +gConfig.Interface[5].Subnet_Mask = 0.0.0.0
 +ATM_UBR
 +Init SAR ifno:5 g_atm_vcc[2] CONN:3 VPI/VCI:0/33
 +MAC Address: 00:1c:ea:cd:33:2a
 +Interface 5 ip = 0.0.0.0
 +
 +gConfig.Interface[13].IP_Addr = 0.0.0.0
 +gConfig.Interface[13].Subnet_Mask = 0.0.0.0
 +IFLNK_PPPOE init : (Linkp)ifno = 13 idx = 2
 +IFLNK_PPPOE init : (Driverp)ifno = 13 idx = 3
 +pppInit> set (PPPShutdownRequest[ifno] = 0)
 +[pppoe_init]
 +Interface 13 ip = 0.0.0.0
 +
 +gConfig.Interface[20].IP_Addr = 0.0.0.0
 +gConfig.Interface[20].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=20 irno=7 port=0x00000000
 +***** [iput_IpLinkUp] ifno=20, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 20 ip = 192.168.0.1
 +
 +gConfig.Interface[21].IP_Addr = 0.0.0.0
 +gConfig.Interface[21].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=21 irno=7 port=0x00000000
 +***** [iput_IpLinkUp] ifno=21, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 21 ip = 192.168.0.1
 +
 +gConfig.Interface[22].IP_Addr = 0.0.0.0
 +gConfig.Interface[22].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=22 irno=7 port=0x00000000
 +***** [iput_IpLinkUp] ifno=22, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 22 ip = 192.168.0.1
 +
 +gConfig.Interface[23].IP_Addr = 0.0.0.0
 +gConfig.Interface[23].Subnet_Mask = 0.0.0.0
 +[HWLAN] ifno=23 irno=7 port=0x00000000
 +***** [iput_IpLinkUp] ifno=23, link_type:12
 +TRAP(linkUp) : send ok!
 +Interface 23 ip = 192.168.0.1
 +
 +gConfig.Interface[25].IP_Addr = 0.0.0.0
 +gConfig.Interface[25].Subnet_Mask = 0.0.0.0
 +pppInit> set (PPPShutdownRequest[ifno] = 0)
 +if_umts_init() WAN interface 25, UMTS-COM1: baudrate=115200 
 +if_umts_init() MAC:74:31:70:F0:C7:CD
 +RUNTASK id=2 umtsEventHandleTsk...
 +RUNTASK id=3 umtsEventExeHandleTsk...
 +umtsReceQueueInit() Host controller disable, bypass queue init...
 +RUNTASK id=4 umtsReceQueueTsk...
 +RUNTASK id=5 umtsReceTsk...
 +RUNTASK id=6 umtsWritTsk...
 +Interface 25 ip = 0.0.0.0
 +
 +ruleCheck()> Group: 0,  Error: Useless rule index will be truncated, from idx:1
 +ruleCheck()> Group: 1,  Error: Useless rule index will be truncated, from idx:22
 +ruleCheck()> Group: 2,  Error: Useless rule index will be truncated, from idx:0
 +CBAC rule format check succeed !!
 +reqCBACBuf()> init match pool, Have: 1000
 +Memory Address: 0xffffffff83899f9c ~ 0xffffffff838a0d18
 +reqCBACBuf()> init timeGap pool, Have: 10000
 +Memory Address: 0xffffffff838a0d18 ~ 0xffffffff838d1a6c
 +reqCBACBuf()> init sameHost pool, Have: 2000
 +Memory Address: 0xffffffff838d1a6c ~ 0xffffffff838e148c
 +CBAC rule pool initialized !!
 +[init_if] local_if_mask=0xf80007
 +[init_if] local_wiredif_mask=0x80002
 +[init_if] local_wirelessif_mask=0xf00004
 +[init_if] localorVPN_if_mask=0xf80007
 +Init NAT data structure
 +RUNTASK id=7 if_task if0...
 +RUNTASK id=8 if_task if1...
 +RUNTASK id=9 if_task if2...
 +RUNTASK id=10 if_task if3...
 +RUNTASK id=11 if_task if4...
 +RUNTASK id=12 if_task if5...
 +RUNTASK id=13 if_task if20...
 +RUNTASK id=14 if_task if21...
 +RUNTASK id=15 if_task if22...
 +RUNTASK id=16 if_task if23...
 +RUNTASK id=17 if_task if25...
 +RUNTASK id=18 timer_task...
 +RUNTASK id=19 conn_mgr...
 +RUNTASK id=20 main_8021x...
 +Build Day = Mar 23 2012
 +RUNTASK id=21 saveRandomSeedTask...
 +[VFS_init] Start...
 +[VFS_init] vfsState:1
 +vfs_codepage_init() TimeZone:25, vfs_cp_idx:25, vfs_cp_ID:1
 +fat_codePageInit() TimeZone:25, codePage:Unknown, cPID:1, cpSize:256, toUpSize:0
 +ntfs_codepage timezone:25, lan= 0
 +ntfs_codePageInit() TimeZone:25, codePage:1
 +==[vfs_register_filesystem]============================
 +list size:7,  Method:0x808f1b68
 +  1) Type:0x01, Name:FAT12
 +  2) Type:0x04, Name:FAT16
 +  3) Type:0x06, Name:FAT16
 +  4) Type:0x0b, Name:FAT32
 +  5) Type:0x0c, Name:FAT32
 +  6) Type:0x0e, Name:FAT16
 +  7) Type:0x81, Name:Minix
 +=================================================================
 +[VFS_init] FAT init OK
 +==[vfs_register_filesystem]============================
 +list size:1,  Method:0x808f1d68
 +  1) Type:0x07, Name:NTFS/HPFS
 +=================================================================
 +[VFS_init] NTFS init OK
 +[VFS_init]-[vfs_mount_root] Start...
 +[VFS_init]-[vfs_mount_root] Init <root> OK...
 +[VFS_init]-[vfs_mount_root] Init <dev> OK...
 +[VFS_init]-[vfs_mount_root] Init <mnt> OK...
 +[0-START]=========================================
 +  Node 000,  DIR, MountFlag:0x00
 +[0-END]===========================================
 +  [1-START]=========================================
 +    Node 001,  DIR, MountFlag:0x00
 +  [1-END]===========================================
 +  [1-START]=========================================
 +    Node 002,  DIR, MountFlag:0x00
 +  [1-END]===========================================
 +dump_inode() freeCnt:77, usedCnt:3
 +[USB-INIT] main() ====== call UsbSysInit() ... 
 +[USB] UsbSPoolArray: 836C21DCH ~ 837AA57B, UsbSPool:836C21E0
 +[USB] UsbMPoolArray: 835F1390H ~ 836C1D8F, UsbMPool:835F13A0
 +[USB] UsbLPoolArray: 837B0BACH ~ 838523CB, UsbLPool:837B0BC0
 +[USB] Small  Un-Cached Memory(4953): 836C21E0 ~ 837AA49F
 +[USB] Medium Un-Cached Memory(206): 835F13A0 ~ 836C0D5F
 +[USB] Large  Un-Cached Memory(37): 837B0BC0 ~ 8384DFBF
 +35921814 04300006 02800000 00008000 18000000 00000000 00000000 00000000 
 +00000000 00000000 ffffffff 35921814 00000000 00000040 00000000 04020116 
 +c9cb0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +
 +30381106 02100000 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00001 00000000 00000000 30381106 00000000 00000080 00000000 00000116 
 +00031040 00000000 00000800 00000000 00000000 00000000 00000000 00000000 
 +00000010 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00002000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +pci_find_slot bus 0 devfn 78
 +dev->bus->number 0 dev->devfn 70
 +dev->bus->number 0 dev->devfn 78
 +setUsbPciInfo() cpu_to_usb_addr_shift[0]:0x60000000, usb_to_cpu_addr_shift[0]:0x
 +a0000000
 +usb_pci_probe() Found VIA UHCI-1 device in PCI slot 0x78, function 0, baseAddr:0
 +xbae00000, IRQ:100000
 +30381106 02100000 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00021 00000000 00000000 30381106 00000000 00000080 00000000 00000200 
 +00031040 00000000 00000800 00000000 00000000 00000000 00000000 00000000 
 +00000010 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00002000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +pci_find_slot bus 0 devfn 79
 +dev->bus->number 0 dev->devfn 70
 +dev->bus->number 0 dev->devfn 78
 +dev->bus->number 0 dev->devfn 79
 +setUsbPciInfo() cpu_to_usb_addr_shift[1]:0x60000000, usb_to_cpu_addr_shift[1]:0x
 +a0000000
 +usb_pci_probe() Found VIA UHCI-2 device in PCI slot 0x79, function 1, baseAddr:0
 +xbae00020, IRQ:100000
 +31041106 02100000 0c032065 00801600 18010000 00000000 00000000 00000000 
 +00000000 00000000 00000000 31041106 00000000 00000080 00000000 00000300 
 +000b0000 00000000 090020a0 ffff0000 80005a00 00000000 88880b04 00000033 
 +00012020 00000000 00000001 80000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +pci_find_slot bus 0 devfn 7a
 +dev->bus->number 0 dev->devfn 70
 +dev->bus->number 0 dev->devfn 78
 +dev->bus->number 0 dev->devfn 79
 +dev->bus->number 0 dev->devfn 7a
 +setUsbPciInfo() cpu_to_usb_addr_shift[4]:0x60000000, usb_to_cpu_addr_shift[4]:0x
 +a0000000
 +usb_pci_probe() Found VIA EHCI device in PCI slot 0x7a, function 2, baseAddr:0xb
 +8010000, IRQ:95
 +setUsbPciInfo() cpu_to_usb_addr_shift[5]:0x00000000, usb_to_cpu_addr_shift[5]:0x
 +00000000
 +usb_pci_probe() Found Synopsis OTG, baseAddr:0xbe101000, IRQ:54
 +usb_hcd_init() probe PCI function:4 !!
 +usb_host_power_set() isOn:1
 +usb_host_power_set() Previous power off:0, current time:0
 +usb_host_power_set(1) min time delay:6000, current delay:0
 +usb_host_power_set() Need delay:6500 **********
 +usb_host_power_set(2) min time delay:6000, current delay:0
 +usb_hcd_init() func(0):1
 +localhc_init() install uhci driver(host_drv = 0x8099B674, uhci_driver=0x8099B674
 +).
 +usb_pci_attach_device() Enable PCI device...PCI: Enabling device 00:0f.0 (0000 -
 +> 0001)
 +OK
 +usb_pci_attach_device() Set latency timer...OK
 +usb_pci_attach_device() Set bus master...PCI: Enabling bus mastering for device 
 +00:0f.0
 +pcibios_set_master> lat=0x16
 +OK
 +usb_pci_attach_device() Set VIA-UHCI special parameters...OK
 +usb_pci_attach_device(UHCI) Attach succ...
 +30381106 02100005 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00001 00000000 00000000 30381106 00000000 00000080 00000000 00000116 
 +00030040 00000000 00000800 00000000 00000000 00000000 00000000 00000000 
 +00000010 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00002000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +usb_hcd_init() func(1):1
 +localhc_init() install uhci driver(host_drv = 0x8099B674, uhci_driver=0x8099B674
 +).
 +usb_pci_attach_device() Enable PCI device...PCI: Enabling device 00:0f.1 (0000 -
 +> 0001)
 +OK
 +usb_pci_attach_device() Set latency timer...OK
 +usb_pci_attach_device() Set bus master...PCI: Enabling bus mastering for device 
 +00:0f.1
 +pcibios_set_master> lat=0x16
 +OK
 +usb_pci_attach_device() Set VIA-UHCI special parameters...OK
 +usb_pci_attach_device(UHCI) Attach succ...
 +30381106 02100005 0c030062 00801600 00000000 00000000 00000000 00000000 
 +1ae00021 00000000 00000000 30381106 00000000 00000080 00000000 00000200 
 +00030040 00000000 00000800 00000000 00000000 00000000 00000000 00000000 
 +00000010 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00002000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +usb_hcd_init() func(2):0
 +usb_hcd_init() func(3):0
 +usb_hcd_init() func(4):1
 +localhc_init() install ehci driver(host_drv = 0x8099B648, ehci_driver=0x8099B648
 +).
 +usb_pci_attach_device() Enable PCI device...PCI: Enabling device 00:0f.2 (0000 -
 +> 0002)
 +OK
 +usb_pci_attach_device() Set latency timer...OK
 +usb_pci_attach_device() Set bus master...PCI: Enabling bus mastering for device 
 +00:0f.2
 +pcibios_set_master> lat=0x16
 +OK
 +usb_pci_attach_device() Set write invalidate...OK
 +usb_pci_attach_device() Set VIA-EHCI special parameters...OK
 +usb_pci_attach_device(EHCI) Attach succ...
 +31041106 02100016 0c032065 00801600 18010000 00000000 00000000 00000000 
 +00000000 00000000 00000000 31041106 00000000 00000080 00000000 00000300 
 +000b0000 00000000 290020a0 ffff0000 80005a00 00000000 88880b04 00000033 
 +00012020 00000000 00000001 c0000000 00000000 00000000 00000000 00000000 
 +7e0a0001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
 +00000000 00000000 00000000 00000000 00000000 03000000 00000000 00000000 
 +
 +usb_hcd_init() func(5):1
 +localhc_init() install otg driver(host_drv = 0x8099B61C, otg_driver=0x8099B61C).
 +usb_hcd_init() func(6):0
 +usb_hcd_init(): succ.
 +[USB-INIT] main() ====== after call UsbSysInit() 
 +InitCommSys: RESOURCE_BASE = 113, NUMRES = 640
 +InitCommSys: EVENT_BASE = 263, NUMEVT = 768
 +InitCommSys: MAILBOX_BASE = 6, NUMMBX = 64
 +ipsec init
 +RUNTASK id=24 period_task...
 +
 +========== ADSL Modem initialization OK ! ======
 +
 +[Dhcpd_Start]
 +RUNTASK id=25 dhcp_daemon...
 +RUNTASK id=26 dhcp_clt...on interface 3
 +RUNTASK id=27 telnetd_main...
 +main()> usb:1, ftp:0
 +Treat it as AMD compatible flash.
 +Manu-ID = 0x00C2, Chip-ID=0x227E, v1/2/3=0x04X/0x04X/0x04X
 +Primary image: 1, flash area 6
 +found signature: 78h 56h 34h 12h
 +ulImgLens=2323341, LENGTH[6]-12=7864308, type:0
 +length checking OK
 +[0]2 find End at 0xFFFFFFFFB0A97000 len=2323341, type=0
 +found signature: 78h 56h 34h 12h
 +ulImgLens=400168, LENGTH[6]-12=7864308, type:10
 +length checking OK
 +[1]2 find End at 0xFFFFFFFFB0AF8C00 len=400168, type=10
 +found signature: 78h 56h 34h 12h
 +ulImgLens=758651, LENGTH[6]-12=7864308, type:11
 +length checking OK
 +[2]2 find End at 0xFFFFFFFFB0BB2000 len=758651, type=11
 +found signature: 78h 56h 34h 12h
 +ulImgLens=357917, LENGTH[6]-12=7864308, type:12
 +length checking OK
 +[3]2 find End at 0xFFFFFFFFB0C09800 len=357917, type=12
 +---[ LZMA head start in 0xFFFFFFFFB0C09C00 ]---
 +found signature: 78h 56h 34h 12h
 +ulImgLens=165868, LENGTH[6]-12=7864308, type:50
 +length checking OK
 +[4]2 find End at 0xFFFFFFFFB0C32400 len=165868, type=50
 +---[ LZMA head start in 0xFFFFFFFFB0C32800 ]---
 +found signature: 78h 56h 34h 12h
 +ulImgLens=452618, LENGTH[6]-12=7864308, type:90
 +length checking OK
 +[5]2 find End at 0xFFFFFFFFB0CA1000 len=452618, type=90
 +Image[1] at 0xB0860000, len=2323341, type=0
 +Image[2] at 0xB0A97400, len=400168, type=10
 +Image[3] at 0xB0AF9000, len=758651, type=11
 +Image[4] at 0xB0BB2400, len=357917, type=12
 +Image[5] at 0xB0C09C00, len=165868, type=50
 +Image[6] at 0xB0C32800, len=452618, type=90
 +[get_web_address] Web-0:  addr:0xb0a97400, len:400168, type:10
 +[get_web_address] Web-1:  addr:0xb0af9000, len:758651, type:11
 +[get_web_address] Web-2:  addr:0xb0bb2400, len:357917, type:12
 +getUnZipFileLength: [ZIP 3]
 +getUnZipFileLength: [ZIP 1]
 +Unzipping from B0A97400 to 83E41000 ... [ZIP 3] [ZIP 2] done
 +Uncompressed size = 716159
 +getUnZipFileLength: [ZIP 3]
 +getUnZipFileLength: [ZIP 1]
 +[absread] flash_init: pfs image found at ffffffffb0bb2400, size is 1856216 bytes
 +Unzipping from B0BB2400 to 83C7BA00 ... [ZIP 3] [ZIP 2] done
 +Uncompressed size = 1856216
 +RUNTASK httpd...
 +RUNTASK id=32 SSLClient ...
 +g_Client_Cert_Array=0x81d30078
 +RUNTASK id=33 dnsproxy...
 +RUNTASK id=34 snmp_task...
 +RUNTASK id=35 rip...
 +RUNTASK id=36 ripout...
 +startNBIOSTask()...
 +RUNTASK id=37 nbios_main...
 +RUNTASK id=38 padmin_task_entry...
 +RUNTASK id=39 dhcpd_mgmt_task...
 +runDDNS() ddns_enable:0, DDNSTaskRun:0, needReRunDDNS:1
 +UPnP task run-up... upnpFunc:1
 +UPNP Device initialize success! slot=40
 +update_device_OUI: OUI_str=743170
 +[0] Allocate mailbox 6
 +[0] Allocate mailbox 7
 +FirstUseDate:0000-00-00T00:00:00
 +RUNTASK id=43 wscmain...
 +RUNTASK id=44 wsc_Send_eap_packet...
 +RUNTASK id=45 wsc_Send_UPNP_packet...
 +RUNTASK id=46 WSC_WaitUserAction_Task...
 +UART RX Input
 +Starting Multitask...
 +
 +rzMemory start: 0x81BD0868, end 0x81D30068, size 1439744[0] Allocate resource 11
 +3, FreeResource = 1
 +fpiclk=83333333, rmc=16, fpiclk/rmc=5208333
 +ifx_ssc_clock = 5208333, baud=2000000
 +ifx_ssc_set_baud: br = 0
 +
 +call ifx_ssc_init() = 0
 +call ifx_ssc_open() = 0
 +SPI_Init!
 +RUNTASK id=49 apAppInit...
 +RUNTASK id=51 pid_cc_err_stats_task...
 +start http redir.
 +RUNTASK id=52 hr_daemon...
 +RUNTASK id=53 hr_misc_daemon...
 +RUNTASK id=54 ncidd_main...,  in run_project_task()
 +enter adsl_disable_annex_j_b43_carrier_set()
 +Danube MEI version:1.00.07
 +Image[1] at 0xB0860000, len=2323341, type=0
 +Image[2] at 0xB0A97400, len=400168, type=10
 +Image[3] at 0xB0AF9000, len=758651, type=11
 +Image[4] at 0xB0BB2400, len=357917, type=12
 +Image[5] at 0xB0C09C00, len=165868, type=50
 +Image[6] at 0xB0C32800, len=452618, type=90
 +[get_datapump_address] Datapump for Annex A0:4, B0:-1, C0:-1
 +[get_datapump_address] Datapump for Annex A1:-1, B1:-1, C1:-1
 +[get_datapump_address] r_img=4, t_img=6
 +Unzip DSP firmware ...
 +Unzipping from B0C09C00 to 834C3000 ... [ZIP 2] xSpeedtsk priority is 80
 +done
 +Uncompressed size = 330216
 +ifno2dot1x_if[2]=0
 +dot1x_wireless_if_mask=0x4
 +fwrite_specialConfigPara() Save random seed:15784863
 +Treat it as AMD compatible flash.
 +[50] Allocate resource 114, FreeResource = 2
 +Reset Duslic High begin
 +erase from location b00a0000. done
 +write length 0x5b0
 +0update_img_hdr = FFFFFFFFA34C3000
 +idx=0 mem_ptr=0xA34C3000 size=65536
 +idx=1 mem_ptr=0xA34D3000 size=65536
 +idx=2 mem_ptr=0xA34E3000 size=65536
 +idx=3 mem_ptr=0xA34F3000 size=65536
 +idx=4 mem_ptr=0xA3503000 size=65536
 +idx=5 mem_ptr=0xA3513000 size=2536
 +init psock cnt=3
 +RUNTASK id=58 AtheroGot MODEM_READY_MSG
 +s_NetTask ...
 +<-- RTMPAllocTxRxRingMemory, Status=0
 +Reset Duslic end
 +IFX TAPI, version 3.7.1.5, (c) 2001-2008 Infineon Technologies AG
 +[21] Allocate mailbox 8
 +TAPI_init_task_queue: enter loop..8
 +[50] Allocate resource 115, FreeResource = 3
 +IFX VMMC device driver, version 1.3.0.5, (c) 2006-2008 Infineon Technologies AG
 +IFX MIPS24KEc MPS driver, version 2.0.0.0, (c) 2006-2008 Infineon Technologies A
 +G
 +ifx_mps_init_structures request_irq 1 146
 +ifx_mps_init_structures request_irq 2 147
 +ifx_mps_init_structures request_irq 3 0 142
 +ifx_mps_init_structures request_irq 3 1 143
 +ifx_mps_init_structures request_irq 3 2 144
 +ifx_mps_init_structures request_irq 3 3 145
 +VMMC_Open : Major 122 Minor 10 
 +IFX_TAPI_Create_Device: ndev = 0, TapiDev 81BCE4E8
 +[50] Allocate resource 116, FreeResource = 4
 +[50] Allocate resource 117, FreeResource = 5
 +[50] Allocate resource 118, FreeResource = 6
 +[50] Allocate resource 119, FreeResource = 7
 +[50] Allocate resource 120, FreeResource = 8
 +[50] Allocate event 263
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +>>>>>>>>>> OS_GetEventNumber: event 263
 +VMMC_AddCaps: CODECS = 0
 +VMMC_AddCaps: CODECS = 0
 +ifx_tapi_Prepare_Ch: nChannel 0
 +[50] Allocate resource 121, FreeResource = 9
 +[50] Allocate resource 122, FreeResource = 10
 +[50] Allocate resource 123, FreeResource = 11
 +VMMC_Prepare_Ch: nChannel = 1
 +[50] Allocate resource 124, FreeResource = 12
 +[50] Allocate event 264
 +>>>>>>>>>> OS_GetEventNumber: event 264
 +ifx_tapi_Prepare_Ch: nChannel 1
 +[50] Allocate resource 125, FreeResource = 13
 +[50] Allocate resource 126, FreeResource = 14
 +[50] Allocate resource 127, FreeResource = 15
 +VMMC_Prepare_Ch: nChannel = 2
 +[50] Allocate resource 128, FreeResource = 16
 +[50] Allocate event 265
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +>>>>>>>>>> OS_GetEventNumber: event 265
 +ifx_tapi_Prepare_Ch: nChannel 2
 +[50] Allocate resource 129, FreeResource = 17
 +[50] Allocate resource 130, FreeResource = 18
 +[50] Allocate resource 131, FreeResource = 19
 +VMMC_Prepare_Ch: nChannel = 3
 +[50] Allocate resource 132, FreeResource = 20
 +[50] Allocate event 266
 +>>>>>>>>>> OS_GetEventNumber: event 266
 +ifx_tapi_Prepare_Ch: nChannel 3
 +[50] Allocate resource 133, FreeResource = 21
 +[50] Allocate resource 134, FreeResource = 22
 +[50] Allocate resource 135, FreeResource = 23
 +VMMC_Prepare_Ch: nChannel = 4
 +[50] Allocate resource 136, FreeResource = 24
 +[50] Allocate event 267
 +>>>>>>>>>> OS_GetEventNumber: event 267
 +ifx_tapi_Prepare_Ch: nChannel 4
 +[50] Allocate resource 137, FreeResource = 25
 +[50] Allocate resource 138, FreeResource = 26
 +[50] Allocate resource 139, FreeResource = 27
 +VMMC_Prepare_Ch: nChannel = 5
 +[50] Allocate resource 140, FreeResource = 28
 +[50] Allocate event 268
 +>>>>>>>>>> OS_GetEventNumber: event 268
 +ifx_tapi_Prepare_Ch: nChannel 5
 +[50] Allocate resource 141, FreeResource = 29
 +[50] Allocate resource 142, FreeResource = 30
 +[50] Allocate resource 143, FreeResource = 31
 +VMMC_Prepare_Ch: nChannel = 6
 +[50] Allocate resource 144, FreeResource = 32
 +[50] Allocate event 269
 +>>>>>>>>>> OS_GetEventNumber: event 269
 +ifx_tapi_Prepare_Ch: nChannel 6
 +[50] Allocate resource 145, FreeResource = 33
 +[50] Allocate resource 146, FreeResource = 34
 +[50] Allocate resource 147, FreeResource = 35
 +VMMC_Prepare_Ch: nChannel = 7
 +[50] Allocate resource 148, FreeResource = 36
 +[50] Allocate event 270
 +>>>>>>>>>> OS_GetEventNumber: event 270
 +ifx_tapi_Prepare_Ch: nChannel 7
 +[50] Allocate resource 149, FreeResource = 37
 +[50] Allocate resource 150, FreeResource = 38
 +[50] Allocate resource 151, FreeResource = 39
 +VMMC_Prepare_Ch: nChannel = 8
 +[50] Allocate resource 152, FreeResource = 40
 +[50] Allocate event 271
 +>>>>>>>>>> OS_GetEventNumber: event 271
 +VMMC_LL_Open, nDev 0, inode 0 mpsCh 1
 +ifx_mps_open, inode 1
 +VMMC_Open --> 81bce4e8
 +VMMC_handle[0] : 81bce4e8
 +VMMC_Open : Major 122 Minor 11 
 +VMMC_LL_Open, nDev 0, inode 1 mpsCh 2
 +ifx_mps_open, inode 2
 +VMMC_Open --> 81bcc178
 +VMMC_handle[1] : 81bcc178
 +VMMC_Open : Major 122 Minor 12 
 +VMMC_LL_Open, nDev 0, inode 2 mpsCh 3
 +ifx_mps_open, inode 3
 +VMMC_Open --> 81bcc5e4
 +VMMC_handle[2] : 81bcc5e4
 +VMMC_Open : Major 122 Minor 13 
 +VMMC_LL_Open, nDev 0, inode 3 mpsCh 4
 +ifx_mps_open, inode 4
 +VMMC_Open --> 81bcca50
 +VMMC_handle[3] : 81bcca50
 +VMMC_Open : Major 122 Minor 14 
 +VMMC_LL_Open, nDev 0, inode 4 mpsCh 5
 +ifx_mps_open, inode 5
 +VMMC_Open --> 81bccebc
 +VMMC_handle[4] : 81bccebc
 +VMMC_Open : Major 122 Minor 15 
 +VMMC_LL_Open, nDev 0, inode 5 mpsCh 6
 +ifx_mps_open, inode 6
 +VMMC_Open --> 81bcd328
 +VMMC_handle[5] : 81bcd328
 +VMMC_Open : Major 122 Minor 16 
 +VMMC_LL_Open, nDev 0, inode 6 mpsCh 7
 +ifx_mps_open, inode 7
 +VMMC_Open --> 81bcd794
 +VMMC_handle[6] : 81bcd794
 +VMMC_Open : Major 122 Minor 17 
 +VMMC_LL_Open, nDev 0, inode 7 mpsCh 8
 +VMMC_Open --> 81bcdc00
 +VMMC_handle[7] : 81bcdc00
 +VMMC_Open : Major 122 Minor 18 
 +VMMC_LL_Open, nDev 0, inode 8 mpsCh 9
 +VMMC_Open --> 81bce06c
 +VMMC_handle[8] : 81bce06c
 +===> 
 +Set PCM I/F 0 VMMC_handle:81bce4e8
 +ifx_mps_ioctl: FIO_MPS_DOWNLOAD...1
 +[get_vcpufirmware_address] DSP firmware: [5 -1], dCnt:1
 +Unzipping from B0C32800 to 82D4B2E8 ... [ZIP 2] Channel=0
 +rtmp_read_wds_from_file() is called !!!
 +rtmp_read_wds_from_file : WDS disabled 
 +Magic No. in Boot Param check OK!!!
 +>>>>>>>>>>>>>WIRELESS Calibration Data Not Ready... Default value applied.
 +Default Data is used !!!
 +sould check E2PROM MAC ?????????????????
 +NICReadEEPROMParameters 882 
 +NICReadEEPROMParameters 945 
 +NICReadEEPROMParameters 970 
 +ADSL> READY
 +done
 +Uncompressed size = 642816
 +IFX_MPS: Download firmware (size 642816 bytes)... [dhcp_clt] enable dhcp client 
 +in interface ATM1[3]
 +[32] SSLClient> SSLClient() run
 +[32] sslc_conf_init> ssl client info:
 +[32] PrivateKey=
 +[32] MyCertificate=
 +[32] CaCertificate=
 +[32] SSL_method=31
 +[32] verify_mode=1
 +[32] cipher_suites=ADH:SHA1:HIGH:EXP
 +[32] tftp_server_ip=140.92.61.131
 +[32] fn_myCerttificate=ServCert.pem
 +[32] fn_privateKey=PrivKey.pem
 +[32] fn_caCertificate=CaCert.pem
 +[32] sslc_conf_init> ssl client info end:
 +PKCS12_PBE_add>
 +PKCS12_PBE_add> support RC4
 +PKCS12_PBE_add> support DES
 +PKCS12_PBE_add> support RC2
 +[32] sslc_conf_init> pCtx=0x81bb20d8 in ssld_conf_init
 +
 +[32] sslc_ctx_reset_cert> re-LoadCACertificate( 3rdCA ) ok!!
 +[32] sslc_ctx_reset_cert> re-LoadCACertificate( 2ndCA ) ok!!
 +[32] sslc_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!!sslc_ctx_reset_cert>
 + this is pkcs12 type certificate
 +
 +[32] sslc_ctx_reset_cert : re-LoadServerCertAndKey() ok!!
 +[32] sslc_conf_init> sslc_conf_init() ok
 +[32] SSLClient> want to bind socket for client application!
 +ok!
 +Version 11.2.5.1.0 up and running...
 +[USBLPT] Printer Initialize Fail : Plug Out !!
 +padmin_task_entry() task running
 +********** upnp_main() Unsupportted UPnP root device:0
 +upnp_main(1-0) Run-up UPnP device IGD...
 +*********************************************
 +****Wi-Fi Simple Config Application***** 
 +Version: Build 2.02.2.DTM1.1, Mar 23 2012 13:56:53
 +*********************************************
 +hr_daemon> port 32769.
 +hr_daemon> ssl port 32770.
 +Init_SSLServer> input listen_protocol=6, nListenPort=32770
 +[52] ssld_conf_init> ssl server info:
 +[52] PrivateKey=
 +[52] MyCertificate=
 +[52] CaCertificate=
 +[52] SSL_method=31
 +[52] verify_mode=0
 +[52] cipher_suites=ADH:SHA1:HIGH:EXP
 +[52] tftp_server_ip=140.92.61.131
 +[52] fn_myCerttificate=ServCert.pem
 +[52] fn_privateKey=PrivKey.pem
 +[52] fn_caCertificate=CaCert.pem
 +[52] ssld_conf_init> ssl server info end:
 +[52] pCtx=0x81b94550 in ssld_conf_init
 +ssld_ctx_reset_cert> this is pkcs12 type certificate
 +
 +[52] ssld_ctx_reset_cert : re-LoadServerCertAndKey() ok!!
 +
 +[52] ssld_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!![52] ssld_conf_init>
 + ssld_conf_init() ok
 +[ncidd]: [ncidd]: <Network Port: 3333>
 +[ncidd]: lan ip=0xffffffffc0a80001
 +[ncidd]: ncidd_nwsk() sndlog_sock = 48
 +[HWLAN] [59] rapi_tmr_task running 
 +uhci_pci_attach: begin ... 
 +ifStrInit()> i:0, dtlStr:[Loop/Loop], rfStr[LB0], type:0, count:1
 +ifStrInit()> i:1, dtlStr:[LAN 1/LAN1], rfStr[L1], type:1, count:1
 +ifStrInit()> i:2, dtlStr:[WLAN1/WLAN1], rfStr[WL1], type:3, count:1
 +ifStrInit()> i:3, dtlStr:[ATM 1/ATM1], rfStr[A1], type:5, count:1
 +ifStrInit()> i:4, dtlStr:[ATM 2/ATM2], rfStr[A2], type:5, count:2
 +ifStrInit()> i:5, dtlStr:[ATM 3/ATM3], rfStr[A3], type:5, count:3
 +ifStrInit()> i:6, dtlStr:[ATM 4/ATM4], rfStr[A4], type:5, count:4
 +ifStrInit()> i:7, dtlStr:[ATM 5/ATM5], rfStr[A5], type:5, count:5
 +ifStrInit()> i:8, dtlStr:[ATM 6/ATM6], rfStr[A6], type:5, count:6
 +ifStrInit()> i:9, dtlStr:[ATM 7/ATM7], rfStr[A7], type:5, count:7
 +ifStrInit()> i:10, dtlStr:[ATM 8/ATM8], rfStr[A8], type:5, count:8
 +ifStrInit()> i:11, dtlStr:[PoE 1/PoE1], rfStr[P1], type:6, count:1
 +ifStrInit()> i:12, dtlStr:[PoE 2/PoE2], rfStr[P2], type:6, count:2
 +ifStrInit()> i:13, dtlStr:[PoE 3/PoE3], rfStr[P3], type:6, count:3
 +ifStrInit()> i:14, dtlStr:[PoE 4/PoE4], rfStr[P4], type:6, count:4
 +ifStrInit()> i:15, dtlStr:[PoE 5/PoE5], rfStr[P5], type:6, count:5
 +ifStrInit()> i:16, dtlStr:[PoE 6/PoE6], rfStr[P6], type:6, count:6
 +ifStrInit()> i:17, dtlStr:[PoE 7/PoE7], rfStr[P7], type:6, count:7
 +ifStrInit()> i:18, dtlStr:[PoE 8/PoE8], rfStr[P8], type:6, count:8
 +ptp Daemon task running
 +ifStrInit()> i:19, dtlStr:[CLONE1/CLONE1], rfStr[CL1], type:9, count:1
 +ifStrInit()> i:20, dtlStr:[WDS1/WDS1], rfStr[WD1], type:8, count:1
 +ifStrInit()> i:21, dtlStr:[WDS2/WDS2], rfStr[WD2], type:8, count:2
 +ifStrInit()> i:22, dtlStr:[WDS3/WDS3], rfStr[WD3], type:8, count:3
 +ifStrInit()> i:23, dtlStr:[WDS4/WDS4], rfStr[WD4], type:8, count:4
 +ifStrInit()> i:24, dtlStr:[/], rfStr[], type:12, count:0
 +lpd Daemon task running
 +[USB ROOTHUB_LOOP] RUNTASK id=62 lpd_main ...
 +[USB] lpd_init() End.
 +printer schedule task running
 +upnp_Init(0) upnpGlobalInit[1]:0
 +SSDP Initialization completed...
 +GenaInit : event_hook is NULL!!
 +
 +>> Parse Service 'urn:schemas-microsoft-com:service:OSInfo:1' : TRUE
 +>> Parse Service 'urn:schemas-upnp-org:service:Layer3Forwarding:1' : TRUE
 +>> Parse Service 'urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1' : TRU
 +E
 +>> Parse Service 'urn:schemas-upnp-org:service:WANEthernetLinkConfig:1' : TRUE
 +>> Parse Service 'urn:schemas-upnp-org:service:WANPPPConnection:1' : TRUE
 +>> Parse Service 'urn:schemas-upnp-org:service:WANIPConnection:1' : TRUE
 +>> Parse Device 'urn:schemas-upnp-org:device:WANConnectionDevice:1' : TRUE
 +>> Parse Device 'urn:schemas-upnp-org:device:WANDevice:1' : TRUE
 +>> Parse Device 'urn:schemas-upnp-org:device:InternetGatewayDevice:1' : TRUE
 +********** upnp_main1() Record pDevRoot[1]:81b7da64
 +
 +>>>> UPNP init successfully ...
 +********** upnp_main() Unsupportted UPnP root device:2
 +upnp_main(3-0) Run-up UPnP device WPS-WCN...
 +upnp_Init(0) upnpGlobalInit[3]:0
 +
 +>> Parse Service 'urn:schemas-wifialliance-org:service:WFAWLANConfig:1' : TRUE
 +>> Parse Device 'urn:schemas-wifialliance-org:device:WFADevice:1' : TRUE
 +********** upnp_main1() Record pDevRoot[3]:81b53640
 +
 +>>>> UPNP init successfully ...
 +********** upnp_main() Unsupportted UPnP root device:4
 +********** upnp_main() Unsupportted UPnP root device:5
 +********** upnp_main() Unsupportted UPnP root device:6
 +uhci_init() UHCI_FRAMELIST_COUNT=1024, alloc size:4096
 +uhci_init() UHCI_FLBASEADDR:0x037f5000, physicalMem:0x037f5000
 +
 +
 +>>>>>> usbd_new_device: adding unit bus:1, addr=1, rev=0100, class=9, subclass=0
 +, protocol=0, maxpacket=64, len=18, speed=2
 +
 +usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 +usbd_open_pipe_intr: ipipe=837AB580 repeat=0 xfer=A3645E20
 +TRAP(coldStart) : send ok!
 +usbd_probe_and_attach,probe 1!
 +uhci_pci_attach: begin ... 
 +uhci_init() UHCI_FRAMELIST_COUNT=1024, alloc size:4096
 +uhci_init() UHCI_FLBASEADDR:0x03824000, physicalMem:0x03824000
 +
 +
 +>>>>>> usbd_new_device: adding unit bus:2, addr=1, rev=0100, class=9, subclass=0
 +, protocol=0, maxpacket=64, len=18, speed=2
 +
 +usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 +usbd_open_pipe_intr: ipipe=837ABA80 repeat=0 xfer=A3647E60
 +usbd_probe_and_attach,probe 1!
 +ehci_pci_attach: begin ... 
 +ehci_pci_attach: ioregs:0xb8010000, irq:95
 +ehci_init() flsize=1024, alloc size:4096
 +ehci_init() EHCI_PERIODICLISTBASE:0x037fd000, physicalMem:0x037fd3c0
 +ehci_init() sqh->physaddr:0x0366e982
 +ehci_init() EHCI_ASYNCLISTADDR:0x0366e980, physicalMem:0x0366e980
 +
 +
 +>>>>>> usbd_new_device: adding unit bus:3, addr=1, rev=0200, class=9, subclass=0
 +, protocol=1, maxpacket=64, len=18, speed=3
 +
 +usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OK
 +usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 +usbd_open_pipe_intr: ipipe=837AC2A0 repeat=0 xfer=A366F340
 +scan channel 1 rssi -71
 +max_rssi[0] -71
 +scan channel 8 rssi -85
 +max_rssi[7] -85
 +scan channel 11 rssi -73
 +max_rssi[10] -73
 +scan channel 11 rssi -18
 +max_rssi[10] -18
 +Dirtyness = 12.1.1.1.1.1.1.13.2.2.13.1.1.
 +APAutoSelectChannel pick up ch#1
 +<==== rt28xx_init, Status=0
 +0x1300 = 00064320
 +ND 2 ???
 +ND 1 ???
 +pAd->VirtualIfCnt 1
 +VMMC_AddCaps: CODECS = 7df
 +[50] Allocate event 272
 +>>>>>>>>>> OS_GetEventNumber: event 272
 +[50] Allocate event 273
 +>>>>>>>>>> OS_GetEventNumber: event 273
 +===> 
 + VMMC_Ioctl: Phone 1 IFX_TAPI_LINE_TYPE ok!
 + VMMC_Ioctl: Phone 1 IFXPHONE_SET_LINEFEED ok!
 +Set PCM I/F 1 VMMC_handle:81bcc178
 +===> 
 + VMMC_Ioctl: Phone 2 IFX_TAPI_LINE_TYPE ok!
 + VMMC_Ioctl: Phone 2 IFXPHONE_SET_LINEFEED ok!
 +Set PCM I/F 2 VMMC_handle:81bcc5e4
 +===> 
 +Set PCM I/F 3 VMMC_handle:81bcca50
 +===> 
 +Set PCM I/F 4 VMMC_handle:81bccebc
 +===> 
 +Set PCM I/F 5 VMMC_handle:81bcd328
 +===> 
 +Set PCM I/F 6 VMMC_handle:81bcd794
 +===> 
 +Set PCM I/F 7 VMMC_handle:81bcdc00
 +===> 
 +Set PCM I/F 8 VMMC_handle:81bce06c
 +Setting HOOK Related Parameters 0
 +Setting HOOKFLASH_TIME min 80 ms max 250 ms
 +Setting HOOKON_TIME min 370 max 370
 +Setting HOOK Related Parameters 1
 +Setting HOOKFLASH_TIME min 80 ms max 250 ms
 +Setting HOOKON_TIME min 370 max 370
 +Setting HOOK Related Parameters 2
 +Setting HOOK Related Parameters 3
 +RUNTASK id=68 VINETIC_DRV_Task...
 +[69] Allocate mailbox 9
 +RUNTASK id=69 VINETIC_T38_Task...
 +RUNTASK id=71 FXO_flash_task...
 +RUNTASK id=70 VOICE_API_task...
 +************** Enable ProDaaCheckInterrupt() detect 5879
 +[htf_dbg]     - OnlineActiveWirless() 1334
 +WirelessMode 9 BasicRate 15
 +AutochannelSelect 0 Channel 0 
 +autoChannel : 1
 +NEW : channel 1, BW 0(20MHZ), EXTCHA 3(BELOW)
 +Set_PreAuth_Proc called, PreAuth=0
 +[signal_1x_reset] ...
 +>>>>>>>>>>>>>>>>>>>>>>tick 6449
 +usbd_probe_and_attach,probe 1!
 +[USB] dwc3884_start() Core id:0, funcIdx:5
 +[USB] dwc3884_start() DWC3884 core version:0x4F54220A, 2.20a, channel:16
 +[USB] dwc3884_reset(Danube) Reset In
 +[USB] dwc3884_reset() DANUBE_RCU_UBSCFG:0xBF203018, var:0x00000400
 +[USB] dwc3884_reset() rstctl:0xBE101010
 +[USB] dwc3884_start() intsts:0xBE101014, var:0x04008829
 +
 +
 +>>>>>> usbd_new_device: adding unit bus:4, addr=1, rev=0200, class=9, subclass=0
 +, protocol=1, maxpacket=64, len=18, speed=3
 +
 +usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OK
 +usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
 +usbd_open_pipe_intr: ipipe=837AC8E0 repeat=0 xfer=A3671380
 +Reset Duslic High begin
 +Reset Duslic end
 +ProDAAInitialize: begin now
 +ProDAAInitialize: Line-Side Device Status 0
 +Port 2 sytem-side revision 45, line-side revision 6
 +init_DTMF_data: time 6899
 +force_daa_offhook ch 2 onoff 1 time 6899
 +ProDaaOffhook 0 2 onoff 1
 +CID_Detect CH 2 onoff 0
 +FXO_PolState_DTMFCID --> Disable DTMF CID
 +force_daa_offhook ch 2 onoff 0 time 6958
 +ProDaaOffhook 1 2 onoff 0
 +CID_Detect CH 2 onoff 1
 +FXO_PolState_DTMFCID --> Detect Polarity Changed Enable DTMF CID
 +When * the value is 60000
 +When * the value is 60000
 +When * the value is 60000
 +When * the value is 60000
 +sys_voip_cfg->cpt.reorder = 425@-230;20(0.24/0.24/1)
 +TEL_DRV_TONE_REORDER  duration = 480
 +When * the value is 60000
 +[50] Allocate resource 153, FreeResource = 41
 +[50] Allocate mailbox 10
 +TEL_MGR_Init
 +[50] Allocate resource 154, FreeResource = 42
 +tel_mgr_mutex=154
 +[50] Allocate mailbox 11
 + TEL_DM_Init
 +[50] Allocate resource 155, FreeResource = 43
 +[50] Allocate resource 156, FreeResource = 44
 + TEL_MGR_VoiceChannelInit
 + TEL_MGR_SetVoiceChannel 1
 + !TEL_MGR_SetVoiceChannel: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneEC
 + !TEL_MGR_SetPhoneEC: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneVAD
 + !TEL_MGR_SetPhoneVAD: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneGain
 +Gain Tx -2, Rx -9
 + TEL_MGR_SetPhoneJitter
 + !TEL_MGR_SetPhoneJitter: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetVoiceChannel 2
 + !TEL_MGR_SetVoiceChannel: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneEC
 + !TEL_MGR_SetPhoneEC: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneVAD
 + !TEL_MGR_SetPhoneVAD: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneGain
 +Gain Tx -2, Rx -9
 + TEL_MGR_SetPhoneJitter
 + !TEL_MGR_SetPhoneJitter: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetVoiceChannel 3
 + !TEL_MGR_SetVoiceChannel: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneEC
 + !TEL_MGR_SetPhoneEC: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneVAD
 + !TEL_MGR_SetPhoneVAD: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneGain
 +Gain Tx -2, Rx -9
 + TEL_MGR_SetPhoneJitter
 + !TEL_MGR_SetPhoneJitter: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetVoiceChannel 4
 + !TEL_MGR_SetVoiceChannel: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneEC
 + !TEL_MGR_SetPhoneEC: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneVAD
 + !TEL_MGR_SetPhoneVAD: TEL_PORT_GetPhoneChannelId fail
 + TEL_MGR_SetPhoneGain
 +usbd_probe_and_attach,probe 1!
 +startExplore() usb explore task run-up, slot:0, tsk_id:49, reason:0
 +usb_hc_install_interrupt() Interrupt disable
 +usb_hc_install_interrupt() Interrupt disable
 +usb_hc_install_interrupt() Install EHCI interrupt 95
 +usb_hc_install_interrupt() Install OTG-1 interrupt 54
 +USB Module: Version 2.0.0 build Mar 23 2012 13:56:31
 +Gain Tx -2, Rx -9
 + TEL_MGR_SetPhoneJitter
 + !TEL_MGR_SetPhoneJitter: TEL_PORT_GetPhoneChannelId fail
 +[50] Allocate resource 157, FreeResource = 45
 +[50] Allocate mailbox 12
 +[73] Allocate resource 158, FreeResource = 46
 +[73] Allocate resource 159, FreeResource = 47
 +[SIP_CORE_Task] sip_core_ready
 +TEL_MGR_SetVoipPhoneEvtHookFunc
 +TEL_MGR_SetVoipPhoneEvtHookFunc
 +TEL_MGR_SetVoipPhoneEvtHookFunc
 +TEL_MGR_SetVoipPhoneEvtHookFunc
 +[50] Allocate resource 160, FreeResource = 48
 +[50] Allocate mailbox 13
 +VOICE_IVR_Init: voice_ivr_channel[0].ivrQueueId = 13
 +[50] Allocate mailbox 14
 +VOICE_IVR_Init: voice_ivr_channel[1].ivrQueueId = 14
 +[50] Allocate mailbox 15
 +VOICE_IVR_Init: voice_ivr_channel[2].ivrQueueId = 15
 +[50] Allocate mailbox 16
 +VOICE_IVR_Init: voice_ivr_channel[3].ivrQueueId = 16
 +[50] Allocate mailbox 17
 +VOICE_IVR_Init: voice_ivr_channel[4].ivrQueueId = 17
 +[50] Allocate mailbox 18
 +VOICE_IVR_Init: voice_ivr_channel[5].ivrQueueId = 18
 +[50] Allocate mailbox 19
 +VOICE_IVR_Init: voice_ivr_channel[6].ivrQueueId = 19
 +[50] Allocate mailbox 20
 +VOICE_IVR_Init: voice_ivr_channel[7].ivrQueueId = 20
 +TEL_MGR_DisableDebug
 +usb_explore_task() Begin ...
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0003)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0003)...
 +[reset_802dot1x] wireless module ready
 +install group key to Mac ASIC ????????????????????????
 +[reset_802dot1x] 802.1Xv2 ready
 +ifno2dot1x_if[2]=0
 +dot1x_wireless_if_mask=0x4
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0003)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0003)...
 +SetscState:scState:2
 +*********************************************
 +***Waiting for Registrar to connect...***
 +*********************************************
 +************** Enable ProDaaCheckInterrupt() detect 8589
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 1 change, need check: status(0x0308), change(0x0001)...
 +uhub_explore(4.5): port 2 change, need check: status(0x0308), change(0x0001)...
 +[reset_802dot1x] wireless module ready
 +install group key to Mac ASIC ????????????????????????
 +[reset_802dot1x] 802.1Xv2 ready
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001
 +ADSL> READY
 +Got MODEM_READY_MSG
 +ADSL Firmware: 2.4.4.10.0.1 [Annex A:0xb107 0x4]
 +[ADSL] : set CMV OPTN 25 0 with 0x00004001</nowiki>
 +</WRAP>\\
 +
 +==== OpenWrt bootlog ====
 +
 +<WRAP bootlog>
 +<nowiki>ROM VER: 1.0.3
 +CFG 01
 +Reaä
 +ROM VER: 1.0.3
 +CFG 01
 +Read EEPROMX
 + X
 +
 +
 +U-Boot 2013.10-openwrt4 (Feb 17 2021 - 08:37:06) ARV7510PW22
 +
 +Board: Arcadyan ARV7510PW22
 +SoC:   Lantiq Danube-S v1.5
 +CPU:   333.333 MHz
 +IO:    166.667 MHz
 +BUS:   83.333 MHz
 +BOOT:  NOR
 +DRAM:  64 MiB
 +Flash: 16 MiB
 +In:    serial
 +Out:   serial
 +Err:   serial
 +Net:   ltq-eth
 +Hit any key to stop autoboot: 
 +## Booting kernel from Legacy Image at 81000000 ...
 +   Image Name:   MIPS OpenWrt Linux-4.14.221
 +   Created:      2021-02-15  15:22:37 UTC
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed)
 +   Data Size:    1819008 Bytes = 1.7 MiB
 +   Load Address: 80002000
 +   Entry Point:  80002000
 +   Verifying Checksum ... OK
 +   Uncompressing Kernel Image ... OK
 +
 +Starting kernel ...
 +
 +[    0.000000] Linux version 4.14.221 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11306-c4a6851c72)) #0 Mon Feb 15 15:22:37 2021
 +[    0.000000] SoC: Danube rev 1.5
 +[    0.000000] bootconsole [early0] enabled
 +[    0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
 +[    0.000000] MIPS: machine is Astoria Networks ARV7510PW22
 +[    0.000000] Determined physical RAM map:
 +[    0.000000]  memory: 04000000 @ 00000000 (usable)
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
 +[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
 +[    0.000000] Zone ranges:
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
 +[    0.000000] random: get_random_bytes called from 0x80570740 with crng_init=0
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
 +[    0.000000] Kernel command line: console=ttyLTQ0,115200
 +[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 +[    0.000000] Writing ErrCtl register=0006ad38
 +[    0.000000] Readback ErrCtl register=0006ad38
 +[    0.000000] Memory: 57884K/65536K available (4722K kernel code, 197K rwdata, 632K rodata, 1216K init, 213K bss, 7652K reserved, 0K cma-reserved)
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 +[    0.000000] NR_IRQS: 256
 +[    0.000000] CPU Clock: 333MHz
 +[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
 +[    0.000020] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
 +[    0.007983] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
 +[    0.054222] pid_max: default: 32768 minimum: 301
 +[    0.059358] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.065923] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.083238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 +[    0.092937] futex hash table entries: 256 (order: -1, 3072 bytes)
 +[    0.099232] pinctrl core: initialized pinctrl subsystem
 +[    0.109849] NET: Registered protocol family 16
 +[    0.123637] pinctrl-xway 1e100b10.pinmux: Init done
 +[    0.130398] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
 +[    0.142862] PCI host bridge /fpi@10000000/pci@e105400 ranges:
 +[    0.148566]  MEM 0x0000000018000000..0x0000000019ffffff
 +[    0.153844]   IO 0x000000001ae00000..0x000000001affffff
 +[    0.217339] usbcore: registered new interface driver usbfs
 +[    0.222977] usbcore: registered new interface driver hub
 +[    0.228403] usbcore: registered new device driver usb
 +[    0.234072] PCI host bridge to bus 0000:00
 +[    0.238126] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
 +[    0.245048] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
 +[    0.251991] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
 +[    0.258845] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
 +[    0.269790] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
 +[    0.276553] pci 0000:00:0f.2: BAR 0: assigned [mem 0x18010000-0x180100ff]
 +[    0.283396] pci 0000:00:0f.0: BAR 4: assigned [io  0x1ae00000-0x1ae0001f]
 +[    0.290253] pci 0000:00:0f.1: BAR 4: assigned [io  0x1ae00020-0x1ae0003f]
 +[    0.309456] clocksource: Switched to clocksource MIPS
 +[    0.317171] NET: Registered protocol family 2
 +[    0.323179] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.330141] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +[    0.336531] TCP: Hash tables configured (established 1024 bind 1024)
 +[    0.343223] UDP hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.349046] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.355781] NET: Registered protocol family 1
 +[    0.360223] PCI: Enabling device 0000:00:0f.0 (0000 -> 0001)
 +[    0.365896] PCI: Enabling device 0000:00:0f.1 (0000 -> 0001)
 +[    0.371614] PCI: Enabling device 0000:00:0f.2 (0000 -> 0002)
 +[    0.383580] gptu: totally 6 16-bit timers/counters
 +[    0.388539] gptu: misc_register on minor 63
 +[    0.392686] gptu: succeeded to request irq 126
 +[    0.397191] gptu: succeeded to request irq 127
 +[    0.401708] gptu: succeeded to request irq 128
 +[    0.406217] gptu: succeeded to request irq 129
 +[    0.410730] gptu: succeeded to request irq 130
 +[    0.415244] gptu: succeeded to request irq 131
 +[    0.426530] lantiq,vmmc 1f103000.vmmc: requested GPIO 489
 +[    0.431889] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
 +[    0.439872] Crashlog allocated RAM at address 0x3f00000
 +[    0.449711] workingset: timestamp_bits=30 max_order=14 bucket_order=0
 +[    0.470360] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    0.476138] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    0.515636] io scheduler noop registered
 +[    0.519500] io scheduler deadline registered (default)
 +[    0.527535] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
 +[    0.536508] console [ttyLTQ0] enabled
 +[    0.536508] console [ttyLTQ0] enabled
 +[    0.543611] bootconsole [early0] disabled
 +[    0.543611] bootconsole [early0] disabled
 +[    0.553603] lantiq nor flash device: 01000000 at 10000000
 +[    0.557823] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
 +[    0.566838] Amd/Fujitsu Extended Query Table at 0x0040
 +[    0.571831]   Amd/Fujitsu Extended Query version 1.3.
 +[    0.576703] number of CFI chips: 1
 +[    0.580059] 4 fixed-partitions partitions found on MTD device ltq_nor
 +[    0.586249] Creating 4 MTD partitions on "ltq_nor":
 +[    0.590988] 0x000000000000-0x000000040000 : "uboot"
 +[    0.597704] 0x000000040000-0x000000060000 : "uboot_env"
 +[    0.603342] 0x000000060000-0x000000fe0000 : "firmware"
 +[    0.648428] 2 uimage-fw partitions found on MTD device firmware
 +[    0.652887] 0x000000060000-0x00000021c1c0 : "kernel"
 +[    0.659473] 0x00000021c1c0-0x000000fe0000 : "rootfs"
 +[    0.664823] mtd: device 4 (rootfs) set to be root filesystem
 +[    0.669112] 1 squashfs-split partitions found on MTD device rootfs
 +[    0.675033] 0x000000560000-0x000000fe0000 : "rootfs_data"
 +[    0.682210] 0x000000fe0000-0x000001000000 : "board_config"
 +[    0.692243] libphy: Fixed MDIO Bus: probed
 +[    0.716295] switch0: Atheros AR8216 rev. 1 switch registered on 1e180000.etop-ffffffff
 +[    0.757184] libphy: ltq_mii: probed
 +[    0.798885] Atheros AR8216/AR8236/AR8316 1e180000.etop-ffffffff:00: attached PHY driver [Atheros AR8216/AR8236/AR8316] (mii_bus:phy_addr=1e180000.etop-ffffffff:00, irq=POLL)
 +[    0.815328] wdt 1f8803f0.watchdog: Init done
 +[    0.823222] NET: Registered protocol family 10
 +[    0.839773] Segment Routing with IPv6
 +[    0.842195] NET: Registered protocol family 17
 +[    0.846439] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
 +[    0.858917] 8021q: 802.1Q VLAN Support v1.8
 +[    0.873148] USB_VBUS: disabling
 +[    0.885050] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
 +[    0.898257] Freeing unused kernel memory: 1216K
 +[    0.901273] This architecture does not have kernel memory protection.
 +[    1.161510] random: fast init done
 +[    2.535984] init: Console is alive
 +[    2.538521] init: - watchdog -
 +[    5.126263] kmodloader: loading kernel modules from /etc/modules-boot.d/*
 +[    5.397301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +[    5.405099] ehci-platform: EHCI generic platform driver
 +[    5.411397] ehci-pci: EHCI PCI platform driver
 +[    5.414747] ehci-pci 0000:00:0f.2: EHCI Host Controller
 +[    5.419573] ehci-pci 0000:00:0f.2: new USB bus registered, assigned bus number 1
 +[    5.426870] ehci-pci 0000:00:0f.2: irq 135, io mem 0x18010000
 +[    5.445560] ehci-pci 0000:00:0f.2: USB 2.0 started, EHCI 1.00
 +[    5.451752] hub 1-0:1.0: USB hub found
 +[    5.454987] hub 1-0:1.0: 4 ports detected
 +[    5.463976] uhci_hcd: USB Universal Host Controller Interface driver
 +[    5.469152] uhci_hcd 0000:00:0f.0: UHCI Host Controller
 +[    5.473994] uhci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
 +[    5.481173] uhci_hcd 0000:00:0f.0: irq 135, io base 0x1ae00000
 +[    5.489655] hub 2-0:1.0: USB hub found
 +[    5.492699] hub 2-0:1.0: 2 ports detected
 +[    5.497582] uhci_hcd 0000:00:0f.1: UHCI Host Controller
 +[    5.501351] uhci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
 +[    5.508606] uhci_hcd 0000:00:0f.1: irq 135, io base 0x1ae00020
 +[    5.517857] hub 3-0:1.0: USB hub found
 +[    5.520940] hub 3-0:1.0: 2 ports detected
 +[    5.534977] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found, using dummy regulator
 +[    5.541938] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found, using dummy regulator
 +[    5.550073] dwc2 1e101000.usb: dwc2_core_reset() HANG! Soft Reset GRSTCTL=80000001
 +[    5.694017] dwc2 1e101000.usb: DWC OTG Controller
 +[    5.697310] dwc2 1e101000.usb: new USB bus registered, assigned bus number 4
 +[    5.704217] dwc2 1e101000.usb: irq 62, io mem 0x1e101000
 +[    5.712310] hub 4-0:1.0: USB hub found
 +[    5.715497] hub 4-0:1.0: 1 port detected
 +[    5.723305] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
 +[    5.731800] init: - preinit -
 +[    7.364368] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +[    7.396778] random: procd: uninitialized urandom read (4 bytes read)
 +Press the [f] key and hit [enter] to enter failsafe mode
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
 +[    8.393815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 +[   10.981360] jffs2: notice: (472) jffs2_build_xattr_subsystem: complete building xattr subsystem, 8 of xdatum (0 unchecked, 6 orphan) and 10 of xref (6 dead, 0 orphan) found.
 +[   10.998148] mount_root: switching to jffs2 overlay
 +[   11.044543] overlayfs: upper fs does not support tmpfile.
 +[   11.061783] urandom-seed: Seeding with /etc/urandom.seed
 +[   11.489329] procd: - early -
 +[   11.491085] procd: - watchdog -
 +[   12.274691] procd: - watchdog -
 +[   12.277267] procd: - ubus -
 +[   12.503333] random: ubusd: uninitialized urandom read (4 bytes read)
 +[   12.512076] random: ubusd: uninitialized urandom read (4 bytes read)
 +[   12.517948] random: ubusd: uninitialized urandom read (4 bytes read)
 +[   12.526552] procd: - init -
 +Please press Enter to activate this console.
 +[   13.603349] urandom_read: 5 callbacks suppressed
 +[   13.603367] random: jshn: uninitialized urandom read (4 bytes read)
 +[   14.189904] kmodloader: loading kernel modules from /etc/modules.d/*
 +[   14.204982] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
 +[   14.235398] Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
 +[   14.263741] NET: Registered protocol family 8
 +[   14.266685] NET: Registered protocol family 20
 +[   14.297124] PPP generic driver version 2.4.2
 +[   14.329374] ip6_tables: (C) 2000-2006 Netfilter Core Team
 +[   14.357620] IFX MEI Version 5.00.00
 +[   14.383872] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
 +[   14.421935] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b
 +[   14.428104] Backport generated by backports.git v4.19.161-1-0-g4bb568fe
 +[   14.470697] Lantiq MIPS24KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
 +[   14.477899] request_timer(3, 0x000001AE, 1)...
 +[   14.477934] successful!
 +[   14.484765] Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
 +[   14.528150] ip_tables: (C) 2000-2006 Netfilter Core Team
 +[   14.558740] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
 +[   14.714804] NET: Registered protocol family 24
 +[   14.774885] xt_time: kernel timezone is -0000
 +[   15.144059] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
 +[   15.149181] rt2800pci 0000:00:0e.0: loaded eeprom from mtd device "board_config"
 +[   15.155453] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
 +[   15.162977] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
 +[   15.333868] kmodloader: done loading kernel modules from /etc/modules.d/*
 +[   15.508819] urngd: v1.0.2 started.
 +[   16.519866] random: crng init done
 +[   43.785710] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +[   43.834560] br-lan: port 1(eth0.1) entered blocking state
 +[   43.838544] br-lan: port 1(eth0.1) entered disabled state
 +[   43.844442] device eth0.1 entered promiscuous mode
 +[   43.848407] device eth0 entered promiscuous mode
 +[   43.909912] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
 +[   44.914149] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 +[   44.919992] br-lan: port 1(eth0.1) entered blocking state
 +[   44.924227] br-lan: port 1(eth0.1) entered forwarding state
 +[   44.930646] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready</nowiki>
 +</WRAP>\\
 +
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>FastEthernet 4Port USB ralink rt3062 64RAM 16Flash MIPS MIPS32 24K ADSL2+ lantiq danube fxo}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1