Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:asmax:ar_1004g [2011/05/14 18:58] lziggytoh:asmax:ar_1004g [2018/02/20 18:51] – ↷ Links adapted because of a move operation bobafetthotmail
Line 1: Line 1:
 +====== Asmax AR 1004g ======
  
 +Hardware of Asmax AR 1004g is identical to such products as ASUS AM604g and D-Link DSL-2640B.
 +
 +==== Hardware info ====
 +^ ADSL2+ Chip with CPU MIPS32 ^ FLASH 4MB ^ SDRAM 16MB ^ Switch  10/100MBit ^ WLAN 802.11b/g ^ ASDL Line driver ^
 +| Broadcom BCM6348SKFBG | SST SST39VF3201 | AOTOM A641604L-6TE x2 | Broadcom BCM5325EKQMG | Broadcom BCM4318KFBG | Broadcom BCM6301KSG |
 +
 +==== CFE startup output ====
 +
 +|<code>CFE version 1.0.37-10.3 for BCM96348 (32bit,SP,BE)
 +Build Date: ËÄ  3ÔÂ 26 11:25:24 CST 2009 (root@hpp)
 +Copyright (C) 2000-2006 Broadcom Corporation.
 +
 +Boot Address 0xbfc00000
 +
 +Initializing Arena.
 +Initializing Devices.
 +Parallel flash device: name SST39VF3201, id 0x235b, size 4096KB
 +Flash Layout: Boot[63,0xbfff0000] Kern[1,0xbfc10000]
 +              AuxFS[61,0xbffd0000] Misc[61,0xbffd0000] PSI[63,0xbfff0000]
 +Flash RootFS Partition Length: 3932160
 +CPU type 0x29107: 256MHz, Bus: 128MHz, Ref: 32MHz
 +Total memory: 16777216 bytes (16MB)
 +
 +Total memory used by CFE:  0x80401000 - 0x80525230 (1196592)
 +Initialized Data:          0x8041CB00 - 0x8041EA50 (8016)
 +BSS Area:                  0x8041EA50 - 0x80423230 (18400)
 +Local Heap:                0x80423230 - 0x80523230 (1048576)
 +Stack Area:                0x80523230 - 0x80525230 (8192)
 +Text (code) segment:       0x80401000 - 0x8041CAF8 (113400)
 +Boot area (physical):      0x00526000 - 0x00566000
 +Relocation Factor:         I:00000000 - D:00000000
 +
 +Board IP address                  : 192.168.1.1:ffffff00  
 +Host IP address                   : 192.168.1.100  
 +Gateway IP address                :   
 +Run from flash/host (f/h)         : f  
 +Default host run file name        : vmlinux  
 +Default host flash file name      : bcm963xx_fs_kernel  
 +Boot delay (0-9 seconds)          : 1  
 +Board Id (0-8)                    : 96348GW-10  
 +Number of MAC Addresses (1-32)    : 11  
 +Base MAC Address                  : (***)  
 +PSI Size (1-64) KBytes            : 24  
 +Flash Block Size (1-128) in KBytes: 0  
 +Auxillary File System Size Percent: 0  
 +
 +udp_send finished
 +No answer .auto boot ...
 +*** Press any key to stop auto run (1 seconds) ***</code>|
 +
 +==== Serial port ====
 +{{media:asmax:ar_1004g_console.jpg?300}}
 +
 +VCC = 3.3 V, speed 115200
 +
 +More infos: [[docs:hardware:port.serial.cables|Serial Cables]]
 +
 +==== JTAG ====
 +{{media:asmax:ar_1004g_jtag.png?300}}
 +
 +  nTRST  1   2 GND
 +  TDI    3   4 GND
 +  TDO    5   6 GND
 +  TMS    7   8 GND
 +  TCK    9  10 GND
 +  nSRST 11  12 GND
 +
 +More infos: [[docs:hardware:port.jtag.cables|JTAG cables]]
 +
 +==== Software ====
 +  * [[https://downloads.openwrt.org/barrier_breaker/14.07/brcm63xx/generic/openwrt-AR1004G-squashfs-cfe.bin|OpenWrt BB14.07 for AR1004g]]
 +  * [[ftp://ftp.asmax.pl/pub/sterowniki/src_asmax1004g/src_release.tar.gz|Source code]]
 +  * [[ftp://ftp.asmax.pl/pub/sterowniki/ar-1004G_ns_wireless/|Firmware]]
 +
 +==== Install OpenWrt / Restore original firmware ====
 +  - Press and hold RESET button
 +  - Turn on router, after 10-15 sec release RESET
 +  - Web browser -> 192.168.1.1 and upload firmware
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>bcm63xx bcm6348 4flash 16ram}}
  • Last modified: 2019/02/12 22:13
  • by tmomas