Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:asmax:ar_1004g [2010/10/31 19:42] – created mexittoh:asmax:ar_1004g [2018/02/20 18:51] – ↷ Links adapted because of a move operation bobafetthotmail
Line 1: Line 1:
 +====== Asmax AR 1004g ======
  
 +Hardware of Asmax AR 1004g is identical to such products as ASUS AM604g and D-Link DSL-2640B.
 +
 +==== Hardware info ====
 +^ ADSL2+ Chip with CPU MIPS32 ^ FLASH 4MB ^ SDRAM 16MB ^ Switch  10/100MBit ^ WLAN 802.11b/g ^ ASDL Line driver ^
 +| Broadcom BCM6348SKFBG | SST SST39VF3201 | AOTOM A641604L-6TE x2 | Broadcom BCM5325EKQMG | Broadcom BCM4318KFBG | Broadcom BCM6301KSG |
 +
 +==== CFE startup output ====
 +
 +|<code>CFE version 1.0.37-10.3 for BCM96348 (32bit,SP,BE)
 +Build Date: ËÄ  3ÔÂ 26 11:25:24 CST 2009 (root@hpp)
 +Copyright (C) 2000-2006 Broadcom Corporation.
 +
 +Boot Address 0xbfc00000
 +
 +Initializing Arena.
 +Initializing Devices.
 +Parallel flash device: name SST39VF3201, id 0x235b, size 4096KB
 +Flash Layout: Boot[63,0xbfff0000] Kern[1,0xbfc10000]
 +              AuxFS[61,0xbffd0000] Misc[61,0xbffd0000] PSI[63,0xbfff0000]
 +Flash RootFS Partition Length: 3932160
 +CPU type 0x29107: 256MHz, Bus: 128MHz, Ref: 32MHz
 +Total memory: 16777216 bytes (16MB)
 +
 +Total memory used by CFE:  0x80401000 - 0x80525230 (1196592)
 +Initialized Data:          0x8041CB00 - 0x8041EA50 (8016)
 +BSS Area:                  0x8041EA50 - 0x80423230 (18400)
 +Local Heap:                0x80423230 - 0x80523230 (1048576)
 +Stack Area:                0x80523230 - 0x80525230 (8192)
 +Text (code) segment:       0x80401000 - 0x8041CAF8 (113400)
 +Boot area (physical):      0x00526000 - 0x00566000
 +Relocation Factor:         I:00000000 - D:00000000
 +
 +Board IP address                  : 192.168.1.1:ffffff00  
 +Host IP address                   : 192.168.1.100  
 +Gateway IP address                :   
 +Run from flash/host (f/h)         : f  
 +Default host run file name        : vmlinux  
 +Default host flash file name      : bcm963xx_fs_kernel  
 +Boot delay (0-9 seconds)          : 1  
 +Board Id (0-8)                    : 96348GW-10  
 +Number of MAC Addresses (1-32)    : 11  
 +Base MAC Address                  : (***)  
 +PSI Size (1-64) KBytes            : 24  
 +Flash Block Size (1-128) in KBytes: 0  
 +Auxillary File System Size Percent: 0  
 +
 +udp_send finished
 +No answer .auto boot ...
 +*** Press any key to stop auto run (1 seconds) ***</code>|
 +
 +==== Serial port ====
 +{{media:asmax:ar_1004g_console.jpg?300}}
 +
 +VCC = 3.3 V, speed 115200
 +
 +More infos: [[docs:hardware:port.serial.cables|Serial Cables]]
 +
 +==== JTAG ====
 +{{media:asmax:ar_1004g_jtag.png?300}}
 +
 +  nTRST  1   2 GND
 +  TDI    3   4 GND
 +  TDO    5   6 GND
 +  TMS    7   8 GND
 +  TCK    9  10 GND
 +  nSRST 11  12 GND
 +
 +More infos: [[docs:hardware:port.jtag.cables|JTAG cables]]
 +
 +==== Software ====
 +  * [[https://downloads.openwrt.org/barrier_breaker/14.07/brcm63xx/generic/openwrt-AR1004G-squashfs-cfe.bin|OpenWrt BB14.07 for AR1004g]]
 +  * [[ftp://ftp.asmax.pl/pub/sterowniki/src_asmax1004g/src_release.tar.gz|Source code]]
 +  * [[ftp://ftp.asmax.pl/pub/sterowniki/ar-1004G_ns_wireless/|Firmware]]
 +
 +==== Install OpenWrt / Restore original firmware ====
 +  - Press and hold RESET button
 +  - Turn on router, after 10-15 sec release RESET
 +  - Web browser -> 192.168.1.1 and upload firmware
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>bcm63xx bcm6348 4flash 16ram}}
  • Last modified: 2019/02/12 22:13
  • by tmomas